1/* 2 * 3 * include/linux/coh901318.h 4 * 5 * 6 * Copyright (C) 2007-2009 ST-Ericsson 7 * License terms: GNU General Public License (GPL) version 2 8 * DMA driver for COH 901 318 9 * Author: Per Friden <per.friden@stericsson.com> 10 */ 11 12#ifndef COH901318_H 13#define COH901318_H 14 15#include <linux/device.h> 16#include <linux/dmaengine.h> 17 18#define MAX_DMA_PACKET_SIZE_SHIFT 11 19#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT) 20 21/** 22 * struct coh901318_lli - linked list item for DMAC 23 * @control: control settings for DMAC 24 * @src_addr: transfer source address 25 * @dst_addr: transfer destination address 26 * @link_addr: physical address to next lli 27 * @virt_link_addr: virtual address of next lli (only used by pool_free) 28 * @phy_this: physical address of current lli (only used by pool_free) 29 */ 30struct coh901318_lli { 31 u32 control; 32 dma_addr_t src_addr; 33 dma_addr_t dst_addr; 34 dma_addr_t link_addr; 35 36 void *virt_link_addr; 37 dma_addr_t phy_this; 38}; 39/** 40 * struct coh901318_params - parameters for DMAC configuration 41 * @config: DMA config register 42 * @ctrl_lli_last: DMA control register for the last lli in the list 43 * @ctrl_lli: DMA control register for an lli 44 * @ctrl_lli_chained: DMA control register for a chained lli 45 */ 46struct coh901318_params { 47 u32 config; 48 u32 ctrl_lli_last; 49 u32 ctrl_lli; 50 u32 ctrl_lli_chained; 51}; 52/** 53 * struct coh_dma_channel - dma channel base 54 * @name: ascii name of dma channel 55 * @number: channel id number 56 * @desc_nbr_max: number of preallocated descriptors 57 * @priority_high: prio of channel, 0 low otherwise high. 58 * @param: configuration parameters 59 * @dev_addr: physical address of periphal connected to channel 60 */ 61struct coh_dma_channel { 62 const char name[32]; 63 const int number; 64 const int desc_nbr_max; 65 const int priority_high; 66 const struct coh901318_params param; 67 const dma_addr_t dev_addr; 68}; 69 70/** 71 * dma_access_memory_state_t - register dma for memory access 72 * 73 * @dev: The dma device 74 * @active: 1 means dma intends to access memory 75 * 0 means dma wont access memory 76 */ 77typedef void (*dma_access_memory_state_t)(struct device *dev, 78 bool active); 79 80/** 81 * struct powersave - DMA power save structure 82 * @lock: lock protecting data in this struct 83 * @started_channels: bit mask indicating active dma channels 84 */ 85struct powersave { 86 spinlock_t lock; 87 u64 started_channels; 88}; 89/** 90 * struct coh901318_platform - platform arch structure 91 * @chans_slave: specifying dma slave channels 92 * @chans_memcpy: specifying dma memcpy channels 93 * @access_memory_state: requesting DMA memory access (on / off) 94 * @chan_conf: dma channel configurations 95 * @max_channels: max number of dma chanenls 96 */ 97struct coh901318_platform { 98 const int *chans_slave; 99 const int *chans_memcpy; 100 const dma_access_memory_state_t access_memory_state; 101 const struct coh_dma_channel *chan_conf; 102 const int max_channels; 103}; 104 105#ifdef CONFIG_COH901318 106/** 107 * coh901318_filter_id() - DMA channel filter function 108 * @chan: dma channel handle 109 * @chan_id: id of dma channel to be filter out 110 * 111 * In dma_request_channel() it specifies what channel id to be requested 112 */ 113bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); 114#else 115static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) 116{ 117 return false; 118} 119#endif 120 121/* 122 * DMA Controller - this access the static mappings of the coh901318 dma. 123 * 124 */ 125 126#define COH901318_MOD32_MASK (0x1F) 127#define COH901318_WORD_MASK (0xFFFFFFFF) 128/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */ 129#define COH901318_INT_STATUS1 (0x0000) 130#define COH901318_INT_STATUS2 (0x0004) 131/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */ 132#define COH901318_TC_INT_STATUS1 (0x0008) 133#define COH901318_TC_INT_STATUS2 (0x000C) 134/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */ 135#define COH901318_TC_INT_CLEAR1 (0x0010) 136#define COH901318_TC_INT_CLEAR2 (0x0014) 137/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ 138#define COH901318_RAW_TC_INT_STATUS1 (0x0018) 139#define COH901318_RAW_TC_INT_STATUS2 (0x001C) 140/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */ 141#define COH901318_BE_INT_STATUS1 (0x0020) 142#define COH901318_BE_INT_STATUS2 (0x0024) 143/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */ 144#define COH901318_BE_INT_CLEAR1 (0x0028) 145#define COH901318_BE_INT_CLEAR2 (0x002C) 146/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */ 147#define COH901318_RAW_BE_INT_STATUS1 (0x0030) 148#define COH901318_RAW_BE_INT_STATUS2 (0x0034) 149 150/* 151 * CX_CFG - Channel Configuration Registers 32bit (R/W) 152 */ 153#define COH901318_CX_CFG (0x0100) 154#define COH901318_CX_CFG_SPACING (0x04) 155/* Channel enable activates tha dma job */ 156#define COH901318_CX_CFG_CH_ENABLE (0x00000001) 157#define COH901318_CX_CFG_CH_DISABLE (0x00000000) 158/* Request Mode */ 159#define COH901318_CX_CFG_RM_MASK (0x00000006) 160#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY (0x0 << 1) 161#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY (0x1 << 1) 162#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY (0x1 << 1) 163#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY (0x3 << 1) 164#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY (0x3 << 1) 165/* Linked channel request field. RM must == 11 */ 166#define COH901318_CX_CFG_LCRF_SHIFT 3 167#define COH901318_CX_CFG_LCRF_MASK (0x000001F8) 168#define COH901318_CX_CFG_LCR_DISABLE (0x00000000) 169/* Terminal Counter Interrupt Request Mask */ 170#define COH901318_CX_CFG_TC_IRQ_ENABLE (0x00000200) 171#define COH901318_CX_CFG_TC_IRQ_DISABLE (0x00000000) 172/* Bus Error interrupt Mask */ 173#define COH901318_CX_CFG_BE_IRQ_ENABLE (0x00000400) 174#define COH901318_CX_CFG_BE_IRQ_DISABLE (0x00000000) 175 176/* 177 * CX_STAT - Channel Status Registers 32bit (R/-) 178 */ 179#define COH901318_CX_STAT (0x0200) 180#define COH901318_CX_STAT_SPACING (0x04) 181#define COH901318_CX_STAT_RBE_IRQ_IND (0x00000008) 182#define COH901318_CX_STAT_RTC_IRQ_IND (0x00000004) 183#define COH901318_CX_STAT_ACTIVE (0x00000002) 184#define COH901318_CX_STAT_ENABLED (0x00000001) 185 186/* 187 * CX_CTRL - Channel Control Registers 32bit (R/W) 188 */ 189#define COH901318_CX_CTRL (0x0400) 190#define COH901318_CX_CTRL_SPACING (0x10) 191/* Transfer Count Enable */ 192#define COH901318_CX_CTRL_TC_ENABLE (0x00001000) 193#define COH901318_CX_CTRL_TC_DISABLE (0x00000000) 194/* Transfer Count Value 0 - 4095 */ 195#define COH901318_CX_CTRL_TC_VALUE_MASK (0x00000FFF) 196/* Burst count */ 197#define COH901318_CX_CTRL_BURST_COUNT_MASK (0x0000E000) 198#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES (0x7 << 13) 199#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES (0x6 << 13) 200#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES (0x5 << 13) 201#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES (0x4 << 13) 202#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES (0x3 << 13) 203#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES (0x2 << 13) 204#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES (0x1 << 13) 205#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE (0x0 << 13) 206/* Source bus size */ 207#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK (0x00030000) 208#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS (0x2 << 16) 209#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS (0x1 << 16) 210#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS (0x0 << 16) 211/* Source address increment */ 212#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE (0x00040000) 213#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE (0x00000000) 214/* Destination Bus Size */ 215#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK (0x00180000) 216#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS (0x2 << 19) 217#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS (0x1 << 19) 218#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS (0x0 << 19) 219/* Destination address increment */ 220#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE (0x00200000) 221#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE (0x00000000) 222/* Master Mode (Master2 is only connected to MSL) */ 223#define COH901318_CX_CTRL_MASTER_MODE_MASK (0x00C00000) 224#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W (0x3 << 22) 225#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W (0x2 << 22) 226#define COH901318_CX_CTRL_MASTER_MODE_M2RW (0x1 << 22) 227#define COH901318_CX_CTRL_MASTER_MODE_M1RW (0x0 << 22) 228/* Terminal Count flag to PER enable */ 229#define COH901318_CX_CTRL_TCP_ENABLE (0x01000000) 230#define COH901318_CX_CTRL_TCP_DISABLE (0x00000000) 231/* Terminal Count flags to CPU enable */ 232#define COH901318_CX_CTRL_TC_IRQ_ENABLE (0x02000000) 233#define COH901318_CX_CTRL_TC_IRQ_DISABLE (0x00000000) 234/* Hand shake to peripheral */ 235#define COH901318_CX_CTRL_HSP_ENABLE (0x04000000) 236#define COH901318_CX_CTRL_HSP_DISABLE (0x00000000) 237#define COH901318_CX_CTRL_HSS_ENABLE (0x08000000) 238#define COH901318_CX_CTRL_HSS_DISABLE (0x00000000) 239/* DMA mode */ 240#define COH901318_CX_CTRL_DDMA_MASK (0x30000000) 241#define COH901318_CX_CTRL_DDMA_LEGACY (0x0 << 28) 242#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1 (0x1 << 28) 243#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2 (0x2 << 28) 244/* Primary Request Data Destination */ 245#define COH901318_CX_CTRL_PRDD_MASK (0x40000000) 246#define COH901318_CX_CTRL_PRDD_DEST (0x1 << 30) 247#define COH901318_CX_CTRL_PRDD_SOURCE (0x0 << 30) 248 249/* 250 * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W) 251 */ 252#define COH901318_CX_SRC_ADDR (0x0404) 253#define COH901318_CX_SRC_ADDR_SPACING (0x10) 254 255/* 256 * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W 257 */ 258#define COH901318_CX_DST_ADDR (0x0408) 259#define COH901318_CX_DST_ADDR_SPACING (0x10) 260 261/* 262 * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W) 263 */ 264#define COH901318_CX_LNK_ADDR (0x040C) 265#define COH901318_CX_LNK_ADDR_SPACING (0x10) 266#define COH901318_CX_LNK_LINK_IMMEDIATE (0x00000001) 267#endif /* COH901318_H */ 268