LXR linux/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c

   1/*
   2 * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de>
   3 *
   4 *  Licensed under the terms of the GNU GPL License version 2.
   5 *
   6 *  Library for common functions for Intel SpeedStep v.1 and v.2 support
   7 *
   8 *  BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
   9 */
  10
  11#include <linux/kernel.h>
  12#include <linux/module.h>
  13#include <linux/moduleparam.h>
  14#include <linux/init.h>
  15#include <linux/cpufreq.h>
  16
  17#include <asm/msr.h>
  18#include <asm/tsc.h>
  19#include "speedstep-lib.h"
  20
  21#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
  22                "speedstep-lib", msg)
  23
  24#define PFX "speedstep-lib: "
  25
  26#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
  27static int relaxed_check;
  28#else
  29#define relaxed_check 0
  30#endif
  31
  32/*********************************************************************
  33 *                   GET PROCESSOR CORE SPEED IN KHZ                 *
  34 *********************************************************************/
  35
  36static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
  37{
  38        /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
  39        struct {
  40                unsigned int ratio;     /* Frequency Multiplier (x10) */
  41                u8 bitmap;              /* power on configuration bits
  42                                        [27, 25:22] (in MSR 0x2a) */
  43        } msr_decode_mult[] = {
  44                { 30, 0x01 },
  45                { 35, 0x05 },
  46                { 40, 0x02 },
  47                { 45, 0x06 },
  48                { 50, 0x00 },
  49                { 55, 0x04 },
  50                { 60, 0x0b },
  51                { 65, 0x0f },
  52                { 70, 0x09 },
  53                { 75, 0x0d },
  54                { 80, 0x0a },
  55                { 85, 0x26 },
  56                { 90, 0x20 },
  57                { 100, 0x2b },
  58                { 0, 0xff }     /* error or unknown value */
  59        };
  60
  61        /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
  62        struct {
  63                unsigned int value;     /* Front Side Bus speed in MHz */
  64                u8 bitmap;              /* power on configuration bits [18: 19]
  65                                        (in MSR 0x2a) */
  66        } msr_decode_fsb[] = {
  67                {  66, 0x0 },
  68                { 100, 0x2 },
  69                { 133, 0x1 },
  70                {   0, 0xff}
  71        };
  72
  73        u32 msr_lo, msr_tmp;
  74        int i = 0, j = 0;
  75
  76        /* read MSR 0x2a - we only need the low 32 bits */
  77        rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
  78        dprintk("P3 - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
  79        msr_tmp = msr_lo;
  80
  81        /* decode the FSB */
  82        msr_tmp &= 0x00c0000;
  83        msr_tmp >>= 18;
  84        while (msr_tmp != msr_decode_fsb[i].bitmap) {
  85                if (msr_decode_fsb[i].bitmap == 0xff)
  86                        return 0;
  87                i++;
  88        }
  89
  90        /* decode the multiplier */
  91        if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
  92                dprintk("workaround for early PIIIs\n");
  93                msr_lo &= 0x03c00000;
  94        } else
  95                msr_lo &= 0x0bc00000;
  96        msr_lo >>= 22;
  97        while (msr_lo != msr_decode_mult[j].bitmap) {
  98                if (msr_decode_mult[j].bitmap == 0xff)
  99                        return 0;
 100                j++;
 101        }
 102
 103        dprintk("speed is %u\n",
 104                (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
 105
 106        return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
 107}
 108
 109
 110static unsigned int pentiumM_get_frequency(void)
 111{
 112        u32 msr_lo, msr_tmp;
 113
 114        rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
 115        dprintk("PM - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
 116
 117        /* see table B-2 of 24547212.pdf */
 118        if (msr_lo & 0x00040000) {
 119                printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
 120                                msr_lo, msr_tmp);
 121                return 0;
 122        }
 123
 124        msr_tmp = (msr_lo >> 22) & 0x1f;
 125        dprintk("bits 22-26 are 0x%x, speed is %u\n",
 126                        msr_tmp, (msr_tmp * 100 * 1000));
 127
 128        return msr_tmp * 100 * 1000;
 129}
 130
 131static unsigned int pentium_core_get_frequency(void)
 132{
 133        u32 fsb = 0;
 134        u32 msr_lo, msr_tmp;
 135        int ret;
 136
 137        rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
 138        /* see table B-2 of 25366920.pdf */
 139        switch (msr_lo & 0x07) {
 140        case 5:
 141                fsb = 100000;
 142                break;
 143        case 1:
 144                fsb = 133333;
 145                break;
 146        case 3:
 147                fsb = 166667;
 148                break;
 149        case 2:
 150                fsb = 200000;
 151                break;
 152        case 0:
 153                fsb = 266667;
 154                break;
 155        case 4:
 156                fsb = 333333;
 157                break;
 158        default:
 159                printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
 160        }
 161
 162        rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
 163        dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
 164                        msr_lo, msr_tmp);
 165
 166        msr_tmp = (msr_lo >> 22) & 0x1f;
 167        dprintk("bits 22-26 are 0x%x, speed is %u\n",
 168                        msr_tmp, (msr_tmp * fsb));
 169
 170        ret = (msr_tmp * fsb);
 171        return ret;
 172}
 173
 174
 175static unsigned int pentium4_get_frequency(void)
 176{
 177        struct cpuinfo_x86 *c = &boot_cpu_data;
 178        u32 msr_lo, msr_hi, mult;
 179        unsigned int fsb = 0;
 180        unsigned int ret;
 181        u8 fsb_code;
 182
 183        /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
 184         * to System Bus Frequency Ratio Field in the Processor Frequency
 185         * Configuration Register of the MSR. Therefore the current
 186         * frequency cannot be calculated and has to be measured.
 187         */
 188        if (c->x86_model < 2)
 189                return cpu_khz;
 190
 191        rdmsr(0x2c, msr_lo, msr_hi);
 192
 193        dprintk("P4 - MSR_EBC_FREQUENCY_ID: 0x%x 0x%x\n", msr_lo, msr_hi);
 194
 195        /* decode the FSB: see IA-32 Intel (C) Architecture Software
 196         * Developer's Manual, Volume 3: System Prgramming Guide,
 197         * revision #12 in Table B-1: MSRs in the Pentium 4 and
 198         * Intel Xeon Processors, on page B-4 and B-5.
 199         */
 200        fsb_code = (msr_lo >> 16) & 0x7;
 201        switch (fsb_code) {
 202        case 0:
 203                fsb = 100 * 1000;
 204                break;
 205        case 1:
 206                fsb = 13333 * 10;
 207                break;
 208        case 2:
 209                fsb = 200 * 1000;
 210                break;
 211        }
 212
 213        if (!fsb)
 214                printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
 215                                "Please send an e-mail to <linux@brodo.de>\n");
 216
 217        /* Multiplier. */
 218        mult = msr_lo >> 24;
 219
 220        dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
 221                        fsb, mult, (fsb * mult));
 222
 223        ret = (fsb * mult);
 224        return ret;
 225}
 226
 227
 228/* Warning: may get called from smp_call_function_single. */
 229unsigned int speedstep_get_frequency(enum speedstep_processor processor)
 230{
 231        switch (processor) {
 232        case SPEEDSTEP_CPU_PCORE:
 233                return pentium_core_get_frequency();
 234        case SPEEDSTEP_CPU_PM:
 235                return pentiumM_get_frequency();
 236        case SPEEDSTEP_CPU_P4D:
 237        case SPEEDSTEP_CPU_P4M:
 238                return pentium4_get_frequency();
 239        case SPEEDSTEP_CPU_PIII_T:
 240        case SPEEDSTEP_CPU_PIII_C:
 241        case SPEEDSTEP_CPU_PIII_C_EARLY:
 242                return pentium3_get_frequency(processor);
 243        default:
 244                return 0;
 245        };
 246        return 0;
 247}
 248EXPORT_SYMBOL_GPL(speedstep_get_frequency);
 249
 250
 251/*********************************************************************
 252 *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
 253 *********************************************************************/
 254
 255unsigned int speedstep_detect_processor(void)
 256{
 257        struct cpuinfo_x86 *c = &cpu_data(0);
 258        u32 ebx, msr_lo, msr_hi;
 259
 260        dprintk("x86: %x, model: %x\n", c->x86, c->x86_model);
 261
 262        if ((c->x86_vendor != X86_VENDOR_INTEL) ||
 263            ((c->x86 != 6) && (c->x86 != 0xF)))
 264                return 0;
 265
 266        if (c->x86 == 0xF) {
 267                /* Intel Mobile Pentium 4-M
 268                 * or Intel Mobile Pentium 4 with 533 MHz FSB */
 269                if (c->x86_model != 2)
 270                        return 0;
 271
 272                ebx = cpuid_ebx(0x00000001);
 273                ebx &= 0x000000FF;
 274
 275                dprintk("ebx value is %x, x86_mask is %x\n", ebx, c->x86_mask);
 276
 277                switch (c->x86_mask) {
 278                case 4:
 279                        /*
 280                         * B-stepping [M-P4-M]
 281                         * sample has ebx = 0x0f, production has 0x0e.
 282                         */
 283                        if ((ebx == 0x0e) || (ebx == 0x0f))
 284                                return SPEEDSTEP_CPU_P4M;
 285                        break;
 286                case 7:
 287                        /*
 288                         * C-stepping [M-P4-M]
 289                         * needs to have ebx=0x0e, else it's a celeron:
 290                         * cf. 25130917.pdf / page 7, footnote 5 even
 291                         * though 25072120.pdf / page 7 doesn't say
 292                         * samples are only of B-stepping...
 293                         */
 294                        if (ebx == 0x0e)
 295                                return SPEEDSTEP_CPU_P4M;
 296                        break;
 297                case 9:
 298                        /*
 299                         * D-stepping [M-P4-M or M-P4/533]
 300                         *
 301                         * this is totally strange: CPUID 0x0F29 is
 302                         * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
 303                         * The latter need to be sorted out as they don't
 304                         * support speedstep.
 305                         * Celerons with CPUID 0x0F29 may have either
 306                         * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
 307                         * specific.
 308                         * M-P4-Ms may have either ebx=0xe or 0xf [see above]
 309                         * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
 310                         * also, M-P4M HTs have ebx=0x8, too
 311                         * For now, they are distinguished by the model_id
 312                         * string
 313                         */
 314                        if ((ebx == 0x0e) ||
 315                                (strstr(c->x86_model_id,
 316                                    "Mobile Intel(R) Pentium(R) 4") != NULL))
 317                                return SPEEDSTEP_CPU_P4M;
 318                        break;
 319                default:
 320                        break;
 321                }
 322                return 0;
 323        }
 324
 325        switch (c->x86_model) {
 326        case 0x0B: /* Intel PIII [Tualatin] */
 327                /* cpuid_ebx(1) is 0x04 for desktop PIII,
 328                 * 0x06 for mobile PIII-M */
 329                ebx = cpuid_ebx(0x00000001);
 330                dprintk("ebx is %x\n", ebx);
 331
 332                ebx &= 0x000000FF;
 333
 334                if (ebx != 0x06)
 335                        return 0;
 336
 337                /* So far all PIII-M processors support SpeedStep. See
 338                 * Intel's 24540640.pdf of June 2003
 339                 */
 340                return SPEEDSTEP_CPU_PIII_T;
 341
 342        case 0x08: /* Intel PIII [Coppermine] */
 343
 344                /* all mobile PIII Coppermines have FSB 100 MHz
 345                 * ==> sort out a few desktop PIIIs. */
 346                rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
 347                dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
 348                                msr_lo, msr_hi);
 349                msr_lo &= 0x00c0000;
 350                if (msr_lo != 0x0080000)
 351                        return 0;
 352
 353                /*
 354                 * If the processor is a mobile version,
 355                 * platform ID has bit 50 set
 356                 * it has SpeedStep technology if either
 357                 * bit 56 or 57 is set
 358                 */
 359                rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
 360                dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
 361                                msr_lo, msr_hi);
 362                if ((msr_hi & (1<<18)) &&
 363                    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
 364                        if (c->x86_mask == 0x01) {
 365                                dprintk("early PIII version\n");
 366                                return SPEEDSTEP_CPU_PIII_C_EARLY;
 367                        } else
 368                                return SPEEDSTEP_CPU_PIII_C;
 369                }
 370
 371        default:
 372                return 0;
 373        }
 374}
 375EXPORT_SYMBOL_GPL(speedstep_detect_processor);
 376
 377
 378/*********************************************************************
 379 *                     DETECT SPEEDSTEP SPEEDS                       *
 380 *********************************************************************/
 381
 382unsigned int speedstep_get_freqs(enum speedstep_processor processor,
 383                                  unsigned int *low_speed,
 384                                  unsigned int *high_speed,
 385                                  unsigned int *transition_latency,
 386                                  void (*set_state) (unsigned int state))
 387{
 388        unsigned int prev_speed;
 389        unsigned int ret = 0;
 390        unsigned long flags;
 391        struct timeval tv1, tv2;
 392
 393        if ((!processor) || (!low_speed) || (!high_speed) || (!set_state))
 394                return -EINVAL;
 395
 396        dprintk("trying to determine both speeds\n");
 397
 398        /* get current speed */
 399        prev_speed = speedstep_get_frequency(processor);
 400        if (!prev_speed)
 401                return -EIO;
 402
 403        dprintk("previous speed is %u\n", prev_speed);
 404
 405        local_irq_save(flags);
 406
 407        /* switch to low state */
 408        set_state(SPEEDSTEP_LOW);
 409        *low_speed = speedstep_get_frequency(processor);
 410        if (!*low_speed) {
 411                ret = -EIO;
 412                goto out;
 413        }
 414
 415        dprintk("low speed is %u\n", *low_speed);
 416
 417        /* start latency measurement */
 418        if (transition_latency)
 419                do_gettimeofday(&tv1);
 420
 421        /* switch to high state */
 422        set_state(SPEEDSTEP_HIGH);
 423
 424        /* end latency measurement */
 425        if (transition_latency)
 426                do_gettimeofday(&tv2);
 427
 428        *high_speed = speedstep_get_frequency(processor);
 429        if (!*high_speed) {
 430                ret = -EIO;
 431                goto out;
 432        }
 433
 434        dprintk("high speed is %u\n", *high_speed);
 435
 436        if (*low_speed == *high_speed) {
 437                ret = -ENODEV;
 438                goto out;
 439        }
 440
 441        /* switch to previous state, if necessary */
 442        if (*high_speed != prev_speed)
 443                set_state(SPEEDSTEP_LOW);
 444
 445        if (transition_latency) {
 446                *transition_latency = (tv2.tv_sec - tv1.tv_sec) * USEC_PER_SEC +
 447                        tv2.tv_usec - tv1.tv_usec;
 448                dprintk("transition latency is %u uSec\n", *transition_latency);
 449
 450                /* convert uSec to nSec and add 20% for safety reasons */
 451                *transition_latency *= 1200;
 452
 453                /* check if the latency measurement is too high or too low
 454                 * and set it to a safe value (500uSec) in that case
 455                 */
 456                if (*transition_latency > 10000000 ||
 457                    *transition_latency < 50000) {
 458                        printk(KERN_WARNING PFX "frequency transition "
 459                                        "measured seems out of range (%u "
 460                                        "nSec), falling back to a safe one of"
 461                                        "%u nSec.\n",
 462                                        *transition_latency, 500000);
 463                        *transition_latency = 500000;
 464                }
 465        }
 466
 467out:
 468        local_irq_restore(flags);
 469        return ret;
 470}
 471EXPORT_SYMBOL_GPL(speedstep_get_freqs);
 472
 473#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
 474module_param(relaxed_check, int, 0444);
 475MODULE_PARM_DESC(relaxed_check,
 476                "Don't do all checks for speedstep capability.");
 477#endif
 478
 479MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
 480MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
 481MODULE_LICENSE("GPL");
 482