linux/drivers/media/dvb/frontends/mt312.c
<<
>>
Prefs
   1/*
   2    Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
   3
   4    Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
   5    Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 2 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15
  16    GNU General Public License for more details.
  17
  18    You should have received a copy of the GNU General Public License
  19    along with this program; if not, write to the Free Software
  20    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21
  22    References:
  23    http://products.zarlink.com/product_profiles/MT312.htm
  24    http://products.zarlink.com/product_profiles/SL1935.htm
  25*/
  26
  27#include <linux/delay.h>
  28#include <linux/errno.h>
  29#include <linux/init.h>
  30#include <linux/kernel.h>
  31#include <linux/module.h>
  32#include <linux/string.h>
  33#include <linux/slab.h>
  34
  35#include "dvb_frontend.h"
  36#include "mt312_priv.h"
  37#include "mt312.h"
  38
  39
  40struct mt312_state {
  41        struct i2c_adapter *i2c;
  42        /* configuration settings */
  43        const struct mt312_config *config;
  44        struct dvb_frontend frontend;
  45
  46        u8 id;
  47        unsigned long xtal;
  48        u8 freq_mult;
  49};
  50
  51static int debug;
  52#define dprintk(args...) \
  53        do { \
  54                if (debug) \
  55                        printk(KERN_DEBUG "mt312: " args); \
  56        } while (0)
  57
  58#define MT312_PLL_CLK           10000000UL      /* 10 MHz */
  59#define MT312_PLL_CLK_10_111    10111000UL      /* 10.111 MHz */
  60
  61static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
  62                      u8 *buf, const size_t count)
  63{
  64        int ret;
  65        struct i2c_msg msg[2];
  66        u8 regbuf[1] = { reg };
  67
  68        msg[0].addr = state->config->demod_address;
  69        msg[0].flags = 0;
  70        msg[0].buf = regbuf;
  71        msg[0].len = 1;
  72        msg[1].addr = state->config->demod_address;
  73        msg[1].flags = I2C_M_RD;
  74        msg[1].buf = buf;
  75        msg[1].len = count;
  76
  77        ret = i2c_transfer(state->i2c, msg, 2);
  78
  79        if (ret != 2) {
  80                printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
  81                return -EREMOTEIO;
  82        }
  83
  84        if (debug) {
  85                int i;
  86                dprintk("R(%d):", reg & 0x7f);
  87                for (i = 0; i < count; i++)
  88                        printk(KERN_CONT " %02x", buf[i]);
  89                printk("\n");
  90        }
  91
  92        return 0;
  93}
  94
  95static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
  96                       const u8 *src, const size_t count)
  97{
  98        int ret;
  99        u8 buf[count + 1];
 100        struct i2c_msg msg;
 101
 102        if (debug) {
 103                int i;
 104                dprintk("W(%d):", reg & 0x7f);
 105                for (i = 0; i < count; i++)
 106                        printk(KERN_CONT " %02x", src[i]);
 107                printk("\n");
 108        }
 109
 110        buf[0] = reg;
 111        memcpy(&buf[1], src, count);
 112
 113        msg.addr = state->config->demod_address;
 114        msg.flags = 0;
 115        msg.buf = buf;
 116        msg.len = count + 1;
 117
 118        ret = i2c_transfer(state->i2c, &msg, 1);
 119
 120        if (ret != 1) {
 121                dprintk("%s: ret == %d\n", __func__, ret);
 122                return -EREMOTEIO;
 123        }
 124
 125        return 0;
 126}
 127
 128static inline int mt312_readreg(struct mt312_state *state,
 129                                const enum mt312_reg_addr reg, u8 *val)
 130{
 131        return mt312_read(state, reg, val, 1);
 132}
 133
 134static inline int mt312_writereg(struct mt312_state *state,
 135                                 const enum mt312_reg_addr reg, const u8 val)
 136{
 137        return mt312_write(state, reg, &val, 1);
 138}
 139
 140static inline u32 mt312_div(u32 a, u32 b)
 141{
 142        return (a + (b / 2)) / b;
 143}
 144
 145static int mt312_reset(struct mt312_state *state, const u8 full)
 146{
 147        return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
 148}
 149
 150static int mt312_get_inversion(struct mt312_state *state,
 151                               fe_spectral_inversion_t *i)
 152{
 153        int ret;
 154        u8 vit_mode;
 155
 156        ret = mt312_readreg(state, VIT_MODE, &vit_mode);
 157        if (ret < 0)
 158                return ret;
 159
 160        if (vit_mode & 0x80)    /* auto inversion was used */
 161                *i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
 162
 163        return 0;
 164}
 165
 166static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr)
 167{
 168        int ret;
 169        u8 sym_rate_h;
 170        u8 dec_ratio;
 171        u16 sym_rat_op;
 172        u16 monitor;
 173        u8 buf[2];
 174
 175        ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h);
 176        if (ret < 0)
 177                return ret;
 178
 179        if (sym_rate_h & 0x80) {
 180                /* symbol rate search was used */
 181                ret = mt312_writereg(state, MON_CTRL, 0x03);
 182                if (ret < 0)
 183                        return ret;
 184
 185                ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
 186                if (ret < 0)
 187                        return ret;
 188
 189                monitor = (buf[0] << 8) | buf[1];
 190
 191                dprintk("sr(auto) = %u\n",
 192                       mt312_div(monitor * 15625, 4));
 193        } else {
 194                ret = mt312_writereg(state, MON_CTRL, 0x05);
 195                if (ret < 0)
 196                        return ret;
 197
 198                ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
 199                if (ret < 0)
 200                        return ret;
 201
 202                dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
 203
 204                ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf));
 205                if (ret < 0)
 206                        return ret;
 207
 208                sym_rat_op = (buf[0] << 8) | buf[1];
 209
 210                dprintk("sym_rat_op=%d dec_ratio=%d\n",
 211                       sym_rat_op, dec_ratio);
 212                dprintk("*sr(manual) = %lu\n",
 213                       (((state->xtal * 8192) / (sym_rat_op + 8192)) *
 214                        2) - dec_ratio);
 215        }
 216
 217        return 0;
 218}
 219
 220static int mt312_get_code_rate(struct mt312_state *state, fe_code_rate_t *cr)
 221{
 222        const fe_code_rate_t fec_tab[8] =
 223            { FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
 224                FEC_AUTO, FEC_AUTO };
 225
 226        int ret;
 227        u8 fec_status;
 228
 229        ret = mt312_readreg(state, FEC_STATUS, &fec_status);
 230        if (ret < 0)
 231                return ret;
 232
 233        *cr = fec_tab[(fec_status >> 4) & 0x07];
 234
 235        return 0;
 236}
 237
 238static int mt312_initfe(struct dvb_frontend *fe)
 239{
 240        struct mt312_state *state = fe->demodulator_priv;
 241        int ret;
 242        u8 buf[2];
 243
 244        /* wake up */
 245        ret = mt312_writereg(state, CONFIG,
 246                        (state->freq_mult == 6 ? 0x88 : 0x8c));
 247        if (ret < 0)
 248                return ret;
 249
 250        /* wait at least 150 usec */
 251        udelay(150);
 252
 253        /* full reset */
 254        ret = mt312_reset(state, 1);
 255        if (ret < 0)
 256                return ret;
 257
 258/* Per datasheet, write correct values. 09/28/03 ACCJr.
 259 * If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */
 260        {
 261                u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02,
 262                                  0x01, 0x00, 0x00, 0x00 };
 263
 264                ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def));
 265                if (ret < 0)
 266                        return ret;
 267        }
 268
 269        switch (state->id) {
 270        case ID_ZL10313:
 271                /* enable ADC */
 272                ret = mt312_writereg(state, GPP_CTRL, 0x80);
 273                if (ret < 0)
 274                        return ret;
 275
 276                /* configure ZL10313 for optimal ADC performance */
 277                buf[0] = 0x80;
 278                buf[1] = 0xB0;
 279                ret = mt312_write(state, HW_CTRL, buf, 2);
 280                if (ret < 0)
 281                        return ret;
 282
 283                /* enable MPEG output and ADCs */
 284                ret = mt312_writereg(state, HW_CTRL, 0x00);
 285                if (ret < 0)
 286                        return ret;
 287
 288                ret = mt312_writereg(state, MPEG_CTRL, 0x00);
 289                if (ret < 0)
 290                        return ret;
 291
 292                break;
 293        }
 294
 295        /* SYS_CLK */
 296        buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
 297
 298        /* DISEQC_RATIO */
 299        buf[1] = mt312_div(state->xtal, 22000 * 4);
 300
 301        ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
 302        if (ret < 0)
 303                return ret;
 304
 305        ret = mt312_writereg(state, SNR_THS_HIGH, 0x32);
 306        if (ret < 0)
 307                return ret;
 308
 309        /* different MOCLK polarity */
 310        switch (state->id) {
 311        case ID_ZL10313:
 312                buf[0] = 0x33;
 313                break;
 314        default:
 315                buf[0] = 0x53;
 316                break;
 317        }
 318
 319        ret = mt312_writereg(state, OP_CTRL, buf[0]);
 320        if (ret < 0)
 321                return ret;
 322
 323        /* TS_SW_LIM */
 324        buf[0] = 0x8c;
 325        buf[1] = 0x98;
 326
 327        ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
 328        if (ret < 0)
 329                return ret;
 330
 331        ret = mt312_writereg(state, CS_SW_LIM, 0x69);
 332        if (ret < 0)
 333                return ret;
 334
 335        return 0;
 336}
 337
 338static int mt312_send_master_cmd(struct dvb_frontend *fe,
 339                                 struct dvb_diseqc_master_cmd *c)
 340{
 341        struct mt312_state *state = fe->demodulator_priv;
 342        int ret;
 343        u8 diseqc_mode;
 344
 345        if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
 346                return -EINVAL;
 347
 348        ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 349        if (ret < 0)
 350                return ret;
 351
 352        ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len);
 353        if (ret < 0)
 354                return ret;
 355
 356        ret = mt312_writereg(state, DISEQC_MODE,
 357                             (diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
 358                             | 0x04);
 359        if (ret < 0)
 360                return ret;
 361
 362        /* is there a better way to wait for message to be transmitted */
 363        msleep(100);
 364
 365        /* set DISEQC_MODE[2:0] to zero if a return message is expected */
 366        if (c->msg[0] & 0x02) {
 367                ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
 368                if (ret < 0)
 369                        return ret;
 370        }
 371
 372        return 0;
 373}
 374
 375static int mt312_send_burst(struct dvb_frontend *fe, const fe_sec_mini_cmd_t c)
 376{
 377        struct mt312_state *state = fe->demodulator_priv;
 378        const u8 mini_tab[2] = { 0x02, 0x03 };
 379
 380        int ret;
 381        u8 diseqc_mode;
 382
 383        if (c > SEC_MINI_B)
 384                return -EINVAL;
 385
 386        ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 387        if (ret < 0)
 388                return ret;
 389
 390        ret = mt312_writereg(state, DISEQC_MODE,
 391                             (diseqc_mode & 0x40) | mini_tab[c]);
 392        if (ret < 0)
 393                return ret;
 394
 395        return 0;
 396}
 397
 398static int mt312_set_tone(struct dvb_frontend *fe, const fe_sec_tone_mode_t t)
 399{
 400        struct mt312_state *state = fe->demodulator_priv;
 401        const u8 tone_tab[2] = { 0x01, 0x00 };
 402
 403        int ret;
 404        u8 diseqc_mode;
 405
 406        if (t > SEC_TONE_OFF)
 407                return -EINVAL;
 408
 409        ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
 410        if (ret < 0)
 411                return ret;
 412
 413        ret = mt312_writereg(state, DISEQC_MODE,
 414                             (diseqc_mode & 0x40) | tone_tab[t]);
 415        if (ret < 0)
 416                return ret;
 417
 418        return 0;
 419}
 420
 421static int mt312_set_voltage(struct dvb_frontend *fe, const fe_sec_voltage_t v)
 422{
 423        struct mt312_state *state = fe->demodulator_priv;
 424        const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
 425        u8 val;
 426
 427        if (v > SEC_VOLTAGE_OFF)
 428                return -EINVAL;
 429
 430        val = volt_tab[v];
 431        if (state->config->voltage_inverted)
 432                val ^= 0x40;
 433
 434        return mt312_writereg(state, DISEQC_MODE, val);
 435}
 436
 437static int mt312_read_status(struct dvb_frontend *fe, fe_status_t *s)
 438{
 439        struct mt312_state *state = fe->demodulator_priv;
 440        int ret;
 441        u8 status[3];
 442
 443        *s = 0;
 444
 445        ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status));
 446        if (ret < 0)
 447                return ret;
 448
 449        dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x,"
 450                " FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
 451
 452        if (status[0] & 0xc0)
 453                *s |= FE_HAS_SIGNAL;    /* signal noise ratio */
 454        if (status[0] & 0x04)
 455                *s |= FE_HAS_CARRIER;   /* qpsk carrier lock */
 456        if (status[2] & 0x02)
 457                *s |= FE_HAS_VITERBI;   /* viterbi lock */
 458        if (status[2] & 0x04)
 459                *s |= FE_HAS_SYNC;      /* byte align lock */
 460        if (status[0] & 0x01)
 461                *s |= FE_HAS_LOCK;      /* qpsk lock */
 462
 463        return 0;
 464}
 465
 466static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber)
 467{
 468        struct mt312_state *state = fe->demodulator_priv;
 469        int ret;
 470        u8 buf[3];
 471
 472        ret = mt312_read(state, RS_BERCNT_H, buf, 3);
 473        if (ret < 0)
 474                return ret;
 475
 476        *ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
 477
 478        return 0;
 479}
 480
 481static int mt312_read_signal_strength(struct dvb_frontend *fe,
 482                                      u16 *signal_strength)
 483{
 484        struct mt312_state *state = fe->demodulator_priv;
 485        int ret;
 486        u8 buf[3];
 487        u16 agc;
 488        s16 err_db;
 489
 490        ret = mt312_read(state, AGC_H, buf, sizeof(buf));
 491        if (ret < 0)
 492                return ret;
 493
 494        agc = (buf[0] << 6) | (buf[1] >> 2);
 495        err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
 496
 497        *signal_strength = agc;
 498
 499        dprintk("agc=%08x err_db=%hd\n", agc, err_db);
 500
 501        return 0;
 502}
 503
 504static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr)
 505{
 506        struct mt312_state *state = fe->demodulator_priv;
 507        int ret;
 508        u8 buf[2];
 509
 510        ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
 511        if (ret < 0)
 512                return ret;
 513
 514        *snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
 515
 516        return 0;
 517}
 518
 519static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
 520{
 521        struct mt312_state *state = fe->demodulator_priv;
 522        int ret;
 523        u8 buf[2];
 524
 525        ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
 526        if (ret < 0)
 527                return ret;
 528
 529        *ubc = (buf[0] << 8) | buf[1];
 530
 531        return 0;
 532}
 533
 534static int mt312_set_frontend(struct dvb_frontend *fe,
 535                              struct dvb_frontend_parameters *p)
 536{
 537        struct mt312_state *state = fe->demodulator_priv;
 538        int ret;
 539        u8 buf[5], config_val;
 540        u16 sr;
 541
 542        const u8 fec_tab[10] =
 543            { 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
 544        const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
 545
 546        dprintk("%s: Freq %d\n", __func__, p->frequency);
 547
 548        if ((p->frequency < fe->ops.info.frequency_min)
 549            || (p->frequency > fe->ops.info.frequency_max))
 550                return -EINVAL;
 551
 552        if ((p->inversion < INVERSION_OFF)
 553            || (p->inversion > INVERSION_ON))
 554                return -EINVAL;
 555
 556        if ((p->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min)
 557            || (p->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max))
 558                return -EINVAL;
 559
 560        if ((p->u.qpsk.fec_inner < FEC_NONE)
 561            || (p->u.qpsk.fec_inner > FEC_AUTO))
 562                return -EINVAL;
 563
 564        if ((p->u.qpsk.fec_inner == FEC_4_5)
 565            || (p->u.qpsk.fec_inner == FEC_8_9))
 566                return -EINVAL;
 567
 568        switch (state->id) {
 569        case ID_VP310:
 570        /* For now we will do this only for the VP310.
 571         * It should be better for the mt312 as well,
 572         * but tuning will be slower. ACCJr 09/29/03
 573         */
 574                ret = mt312_readreg(state, CONFIG, &config_val);
 575                if (ret < 0)
 576                        return ret;
 577                if (p->u.qpsk.symbol_rate >= 30000000) {
 578                        /* Note that 30MS/s should use 90MHz */
 579                        if (state->freq_mult == 6) {
 580                                /* We are running 60MHz */
 581                                state->freq_mult = 9;
 582                                ret = mt312_initfe(fe);
 583                                if (ret < 0)
 584                                        return ret;
 585                        }
 586                } else {
 587                        if (state->freq_mult == 9) {
 588                                /* We are running 90MHz */
 589                                state->freq_mult = 6;
 590                                ret = mt312_initfe(fe);
 591                                if (ret < 0)
 592                                        return ret;
 593                        }
 594                }
 595                break;
 596
 597        case ID_MT312:
 598        case ID_ZL10313:
 599                break;
 600
 601        default:
 602                return -EINVAL;
 603        }
 604
 605        if (fe->ops.tuner_ops.set_params) {
 606                fe->ops.tuner_ops.set_params(fe, p);
 607                if (fe->ops.i2c_gate_ctrl)
 608                        fe->ops.i2c_gate_ctrl(fe, 0);
 609        }
 610
 611        /* sr = (u16)(sr * 256.0 / 1000000.0) */
 612        sr = mt312_div(p->u.qpsk.symbol_rate * 4, 15625);
 613
 614        /* SYM_RATE */
 615        buf[0] = (sr >> 8) & 0x3f;
 616        buf[1] = (sr >> 0) & 0xff;
 617
 618        /* VIT_MODE */
 619        buf[2] = inv_tab[p->inversion] | fec_tab[p->u.qpsk.fec_inner];
 620
 621        /* QPSK_CTRL */
 622        buf[3] = 0x40;          /* swap I and Q before QPSK demodulation */
 623
 624        if (p->u.qpsk.symbol_rate < 10000000)
 625                buf[3] |= 0x04; /* use afc mode */
 626
 627        /* GO */
 628        buf[4] = 0x01;
 629
 630        ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf));
 631        if (ret < 0)
 632                return ret;
 633
 634        mt312_reset(state, 0);
 635
 636        return 0;
 637}
 638
 639static int mt312_get_frontend(struct dvb_frontend *fe,
 640                              struct dvb_frontend_parameters *p)
 641{
 642        struct mt312_state *state = fe->demodulator_priv;
 643        int ret;
 644
 645        ret = mt312_get_inversion(state, &p->inversion);
 646        if (ret < 0)
 647                return ret;
 648
 649        ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate);
 650        if (ret < 0)
 651                return ret;
 652
 653        ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner);
 654        if (ret < 0)
 655                return ret;
 656
 657        return 0;
 658}
 659
 660static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
 661{
 662        struct mt312_state *state = fe->demodulator_priv;
 663
 664        u8 val = 0x00;
 665        int ret;
 666
 667        switch (state->id) {
 668        case ID_ZL10313:
 669                ret = mt312_readreg(state, GPP_CTRL, &val);
 670                if (ret < 0)
 671                        goto error;
 672
 673                /* preserve this bit to not accidentally shutdown ADC */
 674                val &= 0x80;
 675                break;
 676        }
 677
 678        if (enable)
 679                val |= 0x40;
 680        else
 681                val &= ~0x40;
 682
 683        ret = mt312_writereg(state, GPP_CTRL, val);
 684
 685error:
 686        return ret;
 687}
 688
 689static int mt312_sleep(struct dvb_frontend *fe)
 690{
 691        struct mt312_state *state = fe->demodulator_priv;
 692        int ret;
 693        u8 config;
 694
 695        /* reset all registers to defaults */
 696        ret = mt312_reset(state, 1);
 697        if (ret < 0)
 698                return ret;
 699
 700        if (state->id == ID_ZL10313) {
 701                /* reset ADC */
 702                ret = mt312_writereg(state, GPP_CTRL, 0x00);
 703                if (ret < 0)
 704                        return ret;
 705
 706                /* full shutdown of ADCs, mpeg bus tristated */
 707                ret = mt312_writereg(state, HW_CTRL, 0x0d);
 708                if (ret < 0)
 709                        return ret;
 710        }
 711
 712        ret = mt312_readreg(state, CONFIG, &config);
 713        if (ret < 0)
 714                return ret;
 715
 716        /* enter standby */
 717        ret = mt312_writereg(state, CONFIG, config & 0x7f);
 718        if (ret < 0)
 719                return ret;
 720
 721        return 0;
 722}
 723
 724static int mt312_get_tune_settings(struct dvb_frontend *fe,
 725                struct dvb_frontend_tune_settings *fesettings)
 726{
 727        fesettings->min_delay_ms = 50;
 728        fesettings->step_size = 0;
 729        fesettings->max_drift = 0;
 730        return 0;
 731}
 732
 733static void mt312_release(struct dvb_frontend *fe)
 734{
 735        struct mt312_state *state = fe->demodulator_priv;
 736        kfree(state);
 737}
 738
 739#define MT312_SYS_CLK           90000000UL      /* 90 MHz */
 740static struct dvb_frontend_ops mt312_ops = {
 741
 742        .info = {
 743                .name = "Zarlink ???? DVB-S",
 744                .type = FE_QPSK,
 745                .frequency_min = 950000,
 746                .frequency_max = 2150000,
 747                /* FIXME: adjust freq to real used xtal */
 748                .frequency_stepsize = (MT312_PLL_CLK / 1000) / 128,
 749                .symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
 750                .symbol_rate_max = MT312_SYS_CLK / 2,
 751                .caps =
 752                    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
 753                    FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
 754                    FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
 755                    FE_CAN_RECOVER
 756        },
 757
 758        .release = mt312_release,
 759
 760        .init = mt312_initfe,
 761        .sleep = mt312_sleep,
 762        .i2c_gate_ctrl = mt312_i2c_gate_ctrl,
 763
 764        .set_frontend = mt312_set_frontend,
 765        .get_frontend = mt312_get_frontend,
 766        .get_tune_settings = mt312_get_tune_settings,
 767
 768        .read_status = mt312_read_status,
 769        .read_ber = mt312_read_ber,
 770        .read_signal_strength = mt312_read_signal_strength,
 771        .read_snr = mt312_read_snr,
 772        .read_ucblocks = mt312_read_ucblocks,
 773
 774        .diseqc_send_master_cmd = mt312_send_master_cmd,
 775        .diseqc_send_burst = mt312_send_burst,
 776        .set_tone = mt312_set_tone,
 777        .set_voltage = mt312_set_voltage,
 778};
 779
 780struct dvb_frontend *mt312_attach(const struct mt312_config *config,
 781                                        struct i2c_adapter *i2c)
 782{
 783        struct mt312_state *state = NULL;
 784
 785        /* allocate memory for the internal state */
 786        state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
 787        if (state == NULL)
 788                goto error;
 789
 790        /* setup the state */
 791        state->config = config;
 792        state->i2c = i2c;
 793
 794        /* check if the demod is there */
 795        if (mt312_readreg(state, ID, &state->id) < 0)
 796                goto error;
 797
 798        /* create dvb_frontend */
 799        memcpy(&state->frontend.ops, &mt312_ops,
 800                sizeof(struct dvb_frontend_ops));
 801        state->frontend.demodulator_priv = state;
 802
 803        switch (state->id) {
 804        case ID_VP310:
 805                strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
 806                state->xtal = MT312_PLL_CLK;
 807                state->freq_mult = 9;
 808                break;
 809        case ID_MT312:
 810                strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
 811                state->xtal = MT312_PLL_CLK;
 812                state->freq_mult = 6;
 813                break;
 814        case ID_ZL10313:
 815                strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
 816                state->xtal = MT312_PLL_CLK_10_111;
 817                state->freq_mult = 9;
 818                break;
 819        default:
 820                printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313"
 821                        " are supported chips.\n");
 822                goto error;
 823        }
 824
 825        return &state->frontend;
 826
 827error:
 828        kfree(state);
 829        return NULL;
 830}
 831EXPORT_SYMBOL(mt312_attach);
 832
 833module_param(debug, int, 0644);
 834MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 835
 836MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
 837MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
 838MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
 839MODULE_LICENSE("GPL");
 840
 841