1/* $Id: sungem.h,v 1.10.2.4 2002/03/11 08:54:48 davem Exp $ 2 * sungem.h: Definitions for Sun GEM ethernet driver. 3 * 4 * Copyright (C) 2000 David S. Miller (davem@redhat.com) 5 */ 6 7#ifndef _SUNGEM_H 8#define _SUNGEM_H 9 10/* Global Registers */ 11#define GREG_SEBSTATE 0x0000UL /* SEB State Register */ 12#define GREG_CFG 0x0004UL /* Configuration Register */ 13#define GREG_STAT 0x000CUL /* Status Register */ 14#define GREG_IMASK 0x0010UL /* Interrupt Mask Register */ 15#define GREG_IACK 0x0014UL /* Interrupt ACK Register */ 16#define GREG_STAT2 0x001CUL /* Alias of GREG_STAT */ 17#define GREG_PCIESTAT 0x1000UL /* PCI Error Status Register */ 18#define GREG_PCIEMASK 0x1004UL /* PCI Error Mask Register */ 19#define GREG_BIFCFG 0x1008UL /* BIF Configuration Register */ 20#define GREG_BIFDIAG 0x100CUL /* BIF Diagnostics Register */ 21#define GREG_SWRST 0x1010UL /* Software Reset Register */ 22 23/* Global SEB State Register */ 24#define GREG_SEBSTATE_ARB 0x00000003 /* State of Arbiter */ 25#define GREG_SEBSTATE_RXWON 0x00000004 /* RX won internal arbitration */ 26 27/* Global Configuration Register */ 28#define GREG_CFG_IBURST 0x00000001 /* Infinite Burst */ 29#define GREG_CFG_TXDMALIM 0x0000003e /* TX DMA grant limit */ 30#define GREG_CFG_RXDMALIM 0x000007c0 /* RX DMA grant limit */ 31#define GREG_CFG_RONPAULBIT 0x00000800 /* Use mem read multiple for PCI read 32 * after infinite burst (Apple) */ 33#define GREG_CFG_ENBUG2FIX 0x00001000 /* Fix Rx hang after overflow */ 34 35/* Global Interrupt Status Register. 36 * 37 * Reading this register automatically clears bits 0 through 6. 38 * This auto-clearing does not occur when the alias at GREG_STAT2 39 * is read instead. The rest of the interrupt bits only clear when 40 * the secondary interrupt status register corresponding to that 41 * bit is read (ie. if GREG_STAT_PCS is set, it will be cleared by 42 * reading PCS_ISTAT). 43 */ 44#define GREG_STAT_TXINTME 0x00000001 /* TX INTME frame transferred */ 45#define GREG_STAT_TXALL 0x00000002 /* All TX frames transferred */ 46#define GREG_STAT_TXDONE 0x00000004 /* One TX frame transferred */ 47#define GREG_STAT_RXDONE 0x00000010 /* One RX frame arrived */ 48#define GREG_STAT_RXNOBUF 0x00000020 /* No free RX buffers available */ 49#define GREG_STAT_RXTAGERR 0x00000040 /* RX tag framing is corrupt */ 50#define GREG_STAT_PCS 0x00002000 /* PCS signalled interrupt */ 51#define GREG_STAT_TXMAC 0x00004000 /* TX MAC signalled interrupt */ 52#define GREG_STAT_RXMAC 0x00008000 /* RX MAC signalled interrupt */ 53#define GREG_STAT_MAC 0x00010000 /* MAC Control signalled irq */ 54#define GREG_STAT_MIF 0x00020000 /* MIF signalled interrupt */ 55#define GREG_STAT_PCIERR 0x00040000 /* PCI Error interrupt */ 56#define GREG_STAT_TXNR 0xfff80000 /* == TXDMA_TXDONE reg val */ 57#define GREG_STAT_TXNR_SHIFT 19 58 59#define GREG_STAT_ABNORMAL (GREG_STAT_RXNOBUF | GREG_STAT_RXTAGERR | \ 60 GREG_STAT_PCS | GREG_STAT_TXMAC | GREG_STAT_RXMAC | \ 61 GREG_STAT_MAC | GREG_STAT_MIF | GREG_STAT_PCIERR) 62 63#define GREG_STAT_NAPI (GREG_STAT_TXALL | GREG_STAT_TXINTME | \ 64 GREG_STAT_RXDONE | GREG_STAT_ABNORMAL) 65 66/* The layout of GREG_IMASK and GREG_IACK is identical to GREG_STAT. 67 * Bits set in GREG_IMASK will prevent that interrupt type from being 68 * signalled to the cpu. GREG_IACK can be used to clear specific top-level 69 * interrupt conditions in GREG_STAT, ie. it only works for bits 0 through 6. 70 * Setting the bit will clear that interrupt, clear bits will have no effect 71 * on GREG_STAT. 72 */ 73 74/* Global PCI Error Status Register */ 75#define GREG_PCIESTAT_BADACK 0x00000001 /* No ACK64# during ABS64 cycle */ 76#define GREG_PCIESTAT_DTRTO 0x00000002 /* Delayed transaction timeout */ 77#define GREG_PCIESTAT_OTHER 0x00000004 /* Other PCI error, check cfg space */ 78 79/* The layout of the GREG_PCIEMASK is identical to that of GREG_PCIESTAT. 80 * Bits set in GREG_PCIEMASK will prevent that interrupt type from being 81 * signalled to the cpu. 82 */ 83 84/* Global BIF Configuration Register */ 85#define GREG_BIFCFG_SLOWCLK 0x00000001 /* Set if PCI runs < 25Mhz */ 86#define GREG_BIFCFG_B64DIS 0x00000002 /* Disable 64bit wide data cycle*/ 87#define GREG_BIFCFG_M66EN 0x00000004 /* Set if on 66Mhz PCI segment */ 88 89/* Global BIF Diagnostics Register */ 90#define GREG_BIFDIAG_BURSTSM 0x007f0000 /* PCI Burst state machine */ 91#define GREG_BIFDIAG_BIFSM 0xff000000 /* BIF state machine */ 92 93/* Global Software Reset Register. 94 * 95 * This register is used to perform a global reset of the RX and TX portions 96 * of the GEM asic. Setting the RX or TX reset bit will start the reset. 97 * The driver _MUST_ poll these bits until they clear. One may not attempt 98 * to program any other part of GEM until the bits clear. 99 */ 100#define GREG_SWRST_TXRST 0x00000001 /* TX Software Reset */ 101#define GREG_SWRST_RXRST 0x00000002 /* RX Software Reset */ 102#define GREG_SWRST_RSTOUT 0x00000004 /* Force RST# pin active */ 103#define GREG_SWRST_CACHESIZE 0x00ff0000 /* RIO only: cache line size */ 104#define GREG_SWRST_CACHE_SHIFT 16 105 106/* TX DMA Registers */ 107#define TXDMA_KICK 0x2000UL /* TX Kick Register */ 108#define TXDMA_CFG 0x2004UL /* TX Configuration Register */ 109#define TXDMA_DBLOW 0x2008UL /* TX Desc. Base Low */ 110#define TXDMA_DBHI 0x200CUL /* TX Desc. Base High */ 111#define TXDMA_FWPTR 0x2014UL /* TX FIFO Write Pointer */ 112#define TXDMA_FSWPTR 0x2018UL /* TX FIFO Shadow Write Pointer */ 113#define TXDMA_FRPTR 0x201CUL /* TX FIFO Read Pointer */ 114#define TXDMA_FSRPTR 0x2020UL /* TX FIFO Shadow Read Pointer */ 115#define TXDMA_PCNT 0x2024UL /* TX FIFO Packet Counter */ 116#define TXDMA_SMACHINE 0x2028UL /* TX State Machine Register */ 117#define TXDMA_DPLOW 0x2030UL /* TX Data Pointer Low */ 118#define TXDMA_DPHI 0x2034UL /* TX Data Pointer High */ 119#define TXDMA_TXDONE 0x2100UL /* TX Completion Register */ 120#define TXDMA_FADDR 0x2104UL /* TX FIFO Address */ 121#define TXDMA_FTAG 0x2108UL /* TX FIFO Tag */ 122#define TXDMA_DLOW 0x210CUL /* TX FIFO Data Low */ 123#define TXDMA_DHIT1 0x2110UL /* TX FIFO Data HighT1 */ 124#define TXDMA_DHIT0 0x2114UL /* TX FIFO Data HighT0 */ 125#define TXDMA_FSZ 0x2118UL /* TX FIFO Size */ 126 127/* TX Kick Register. 128 * 129 * This 13-bit register is programmed by the driver to hold the descriptor 130 * entry index which follows the last valid transmit descriptor. 131 */ 132 133/* TX Completion Register. 134 * 135 * This 13-bit register is updated by GEM to hold to descriptor entry index 136 * which follows the last descriptor already processed by GEM. Note that 137 * this value is mirrored in GREG_STAT which eliminates the need to even 138 * access this register in the driver during interrupt processing. 139 */ 140 141/* TX Configuration Register. 142 * 143 * Note that TXDMA_CFG_FTHRESH, the TX FIFO Threshold, is an obsolete feature 144 * that was meant to be used with jumbo packets. It should be set to the 145 * maximum value of 0x4ff, else one risks getting TX MAC Underrun errors. 146 */ 147#define TXDMA_CFG_ENABLE 0x00000001 /* Enable TX DMA channel */ 148#define TXDMA_CFG_RINGSZ 0x0000001e /* TX descriptor ring size */ 149#define TXDMA_CFG_RINGSZ_32 0x00000000 /* 32 TX descriptors */ 150#define TXDMA_CFG_RINGSZ_64 0x00000002 /* 64 TX descriptors */ 151#define TXDMA_CFG_RINGSZ_128 0x00000004 /* 128 TX descriptors */ 152#define TXDMA_CFG_RINGSZ_256 0x00000006 /* 256 TX descriptors */ 153#define TXDMA_CFG_RINGSZ_512 0x00000008 /* 512 TX descriptors */ 154#define TXDMA_CFG_RINGSZ_1K 0x0000000a /* 1024 TX descriptors */ 155#define TXDMA_CFG_RINGSZ_2K 0x0000000c /* 2048 TX descriptors */ 156#define TXDMA_CFG_RINGSZ_4K 0x0000000e /* 4096 TX descriptors */ 157#define TXDMA_CFG_RINGSZ_8K 0x00000010 /* 8192 TX descriptors */ 158#define TXDMA_CFG_PIOSEL 0x00000020 /* Enable TX FIFO PIO from cpu */ 159#define TXDMA_CFG_FTHRESH 0x001ffc00 /* TX FIFO Threshold, obsolete */ 160#define TXDMA_CFG_PMODE 0x00200000 /* TXALL irq means TX FIFO empty*/ 161 162/* TX Descriptor Base Low/High. 163 * 164 * These two registers store the 53 most significant bits of the base address 165 * of the TX descriptor table. The 11 least significant bits are always 166 * zero. As a result, the TX descriptor table must be 2K aligned. 167 */ 168 169/* The rest of the TXDMA_* registers are for diagnostics and debug, I will document 170 * them later. -DaveM 171 */ 172 173/* WakeOnLan Registers */ 174#define WOL_MATCH0 0x3000UL 175#define WOL_MATCH1 0x3004UL 176#define WOL_MATCH2 0x3008UL 177#define WOL_MCOUNT 0x300CUL 178#define WOL_WAKECSR 0x3010UL 179 180/* WOL Match count register 181 */ 182#define WOL_MCOUNT_N 0x00000010 183#define WOL_MCOUNT_M 0x00000000 /* 0 << 8 */ 184 185#define WOL_WAKECSR_ENABLE 0x00000001 186#define WOL_WAKECSR_MII 0x00000002 187#define WOL_WAKECSR_SEEN 0x00000004 188#define WOL_WAKECSR_FILT_UCAST 0x00000008 189#define WOL_WAKECSR_FILT_MCAST 0x00000010 190#define WOL_WAKECSR_FILT_BCAST 0x00000020 191#define WOL_WAKECSR_FILT_SEEN 0x00000040 192 193 194/* Receive DMA Registers */ 195#define RXDMA_CFG 0x4000UL /* RX Configuration Register */ 196#define RXDMA_DBLOW 0x4004UL /* RX Descriptor Base Low */ 197#define RXDMA_DBHI 0x4008UL /* RX Descriptor Base High */ 198#define RXDMA_FWPTR 0x400CUL /* RX FIFO Write Pointer */ 199#define RXDMA_FSWPTR 0x4010UL /* RX FIFO Shadow Write Pointer */ 200#define RXDMA_FRPTR 0x4014UL /* RX FIFO Read Pointer */ 201#define RXDMA_PCNT 0x4018UL /* RX FIFO Packet Counter */ 202#define RXDMA_SMACHINE 0x401CUL /* RX State Machine Register */ 203#define RXDMA_PTHRESH 0x4020UL /* Pause Thresholds */ 204#define RXDMA_DPLOW 0x4024UL /* RX Data Pointer Low */ 205#define RXDMA_DPHI 0x4028UL /* RX Data Pointer High */ 206#define RXDMA_KICK 0x4100UL /* RX Kick Register */ 207#define RXDMA_DONE 0x4104UL /* RX Completion Register */ 208#define RXDMA_BLANK 0x4108UL /* RX Blanking Register */ 209#define RXDMA_FADDR 0x410CUL /* RX FIFO Address */ 210#define RXDMA_FTAG 0x4110UL /* RX FIFO Tag */ 211#define RXDMA_DLOW 0x4114UL /* RX FIFO Data Low */ 212#define RXDMA_DHIT1 0x4118UL /* RX FIFO Data HighT0 */ 213#define RXDMA_DHIT0 0x411CUL /* RX FIFO Data HighT1 */ 214#define RXDMA_FSZ 0x4120UL /* RX FIFO Size */ 215 216/* RX Configuration Register. */ 217#define RXDMA_CFG_ENABLE 0x00000001 /* Enable RX DMA channel */ 218#define RXDMA_CFG_RINGSZ 0x0000001e /* RX descriptor ring size */ 219#define RXDMA_CFG_RINGSZ_32 0x00000000 /* - 32 entries */ 220#define RXDMA_CFG_RINGSZ_64 0x00000002 /* - 64 entries */ 221#define RXDMA_CFG_RINGSZ_128 0x00000004 /* - 128 entries */ 222#define RXDMA_CFG_RINGSZ_256 0x00000006 /* - 256 entries */ 223#define RXDMA_CFG_RINGSZ_512 0x00000008 /* - 512 entries */ 224#define RXDMA_CFG_RINGSZ_1K 0x0000000a /* - 1024 entries */ 225#define RXDMA_CFG_RINGSZ_2K 0x0000000c /* - 2048 entries */ 226#define RXDMA_CFG_RINGSZ_4K 0x0000000e /* - 4096 entries */ 227#define RXDMA_CFG_RINGSZ_8K 0x00000010 /* - 8192 entries */ 228#define RXDMA_CFG_RINGSZ_BDISAB 0x00000020 /* Disable RX desc batching */ 229#define RXDMA_CFG_FBOFF 0x00001c00 /* Offset of first data byte */ 230#define RXDMA_CFG_CSUMOFF 0x000fe000 /* Skip bytes before csum calc */ 231#define RXDMA_CFG_FTHRESH 0x07000000 /* RX FIFO dma start threshold */ 232#define RXDMA_CFG_FTHRESH_64 0x00000000 /* - 64 bytes */ 233#define RXDMA_CFG_FTHRESH_128 0x01000000 /* - 128 bytes */ 234#define RXDMA_CFG_FTHRESH_256 0x02000000 /* - 256 bytes */ 235#define RXDMA_CFG_FTHRESH_512 0x03000000 /* - 512 bytes */ 236#define RXDMA_CFG_FTHRESH_1K 0x04000000 /* - 1024 bytes */ 237#define RXDMA_CFG_FTHRESH_2K 0x05000000 /* - 2048 bytes */ 238 239/* RX Descriptor Base Low/High. 240 * 241 * These two registers store the 53 most significant bits of the base address 242 * of the RX descriptor table. The 11 least significant bits are always 243 * zero. As a result, the RX descriptor table must be 2K aligned. 244 */ 245 246/* RX PAUSE Thresholds. 247 * 248 * These values determine when XOFF and XON PAUSE frames are emitted by 249 * GEM. The thresholds measure RX FIFO occupancy in units of 64 bytes. 250 */ 251#define RXDMA_PTHRESH_OFF 0x000001ff /* XOFF emitted w/FIFO > this */ 252#define RXDMA_PTHRESH_ON 0x001ff000 /* XON emitted w/FIFO < this */ 253 254/* RX Kick Register. 255 * 256 * This 13-bit register is written by the host CPU and holds the last 257 * valid RX descriptor number plus one. This is, if 'N' is written to 258 * this register, it means that all RX descriptors up to but excluding 259 * 'N' are valid. 260 * 261 * The hardware requires that RX descriptors are posted in increments 262 * of 4. This means 'N' must be a multiple of four. For the best 263 * performance, the first new descriptor being posted should be (PCI) 264 * cache line aligned. 265 */ 266 267/* RX Completion Register. 268 * 269 * This 13-bit register is updated by GEM to indicate which RX descriptors 270 * have already been used for receive frames. All descriptors up to but 271 * excluding the value in this register are ready to be processed. GEM 272 * updates this register value after the RX FIFO empties completely into 273 * the RX descriptor's buffer, but before the RX_DONE bit is set in the 274 * interrupt status register. 275 */ 276 277/* RX Blanking Register. */ 278#define RXDMA_BLANK_IPKTS 0x000001ff /* RX_DONE asserted after this 279 * many packets received since 280 * previous RX_DONE. 281 */ 282#define RXDMA_BLANK_ITIME 0x000ff000 /* RX_DONE asserted after this 283 * many clocks (measured in 2048 284 * PCI clocks) were counted since 285 * the previous RX_DONE. 286 */ 287 288/* RX FIFO Size. 289 * 290 * This 11-bit read-only register indicates how large, in units of 64-bytes, 291 * the RX FIFO is. The driver uses this to properly configure the RX PAUSE 292 * thresholds. 293 */ 294 295/* The rest of the RXDMA_* registers are for diagnostics and debug, I will document 296 * them later. -DaveM 297 */ 298 299/* MAC Registers */ 300#define MAC_TXRST 0x6000UL /* TX MAC Software Reset Command*/ 301#define MAC_RXRST 0x6004UL /* RX MAC Software Reset Command*/ 302#define MAC_SNDPAUSE 0x6008UL /* Send Pause Command Register */ 303#define MAC_TXSTAT 0x6010UL /* TX MAC Status Register */ 304#define MAC_RXSTAT 0x6014UL /* RX MAC Status Register */ 305#define MAC_CSTAT 0x6018UL /* MAC Control Status Register */ 306#define MAC_TXMASK 0x6020UL /* TX MAC Mask Register */ 307#define MAC_RXMASK 0x6024UL /* RX MAC Mask Register */ 308#define MAC_MCMASK 0x6028UL /* MAC Control Mask Register */ 309#define MAC_TXCFG 0x6030UL /* TX MAC Configuration Register*/ 310#define MAC_RXCFG 0x6034UL /* RX MAC Configuration Register*/ 311#define MAC_MCCFG 0x6038UL /* MAC Control Config Register */ 312#define MAC_XIFCFG 0x603CUL /* XIF Configuration Register */ 313#define MAC_IPG0 0x6040UL /* InterPacketGap0 Register */ 314#define MAC_IPG1 0x6044UL /* InterPacketGap1 Register */ 315#define MAC_IPG2 0x6048UL /* InterPacketGap2 Register */ 316#define MAC_STIME 0x604CUL /* SlotTime Register */ 317#define MAC_MINFSZ 0x6050UL /* MinFrameSize Register */ 318#define MAC_MAXFSZ 0x6054UL /* MaxFrameSize Register */ 319#define MAC_PASIZE 0x6058UL /* PA Size Register */ 320#define MAC_JAMSIZE 0x605CUL /* JamSize Register */ 321#define MAC_ATTLIM 0x6060UL /* Attempt Limit Register */ 322#define MAC_MCTYPE 0x6064UL /* MAC Control Type Register */ 323#define MAC_ADDR0 0x6080UL /* MAC Address 0 Register */ 324#define MAC_ADDR1 0x6084UL /* MAC Address 1 Register */ 325#define MAC_ADDR2 0x6088UL /* MAC Address 2 Register */ 326#define MAC_ADDR3 0x608CUL /* MAC Address 3 Register */ 327#define MAC_ADDR4 0x6090UL /* MAC Address 4 Register */ 328#define MAC_ADDR5 0x6094UL /* MAC Address 5 Register */ 329#define MAC_ADDR6 0x6098UL /* MAC Address 6 Register */ 330#define MAC_ADDR7 0x609CUL /* MAC Address 7 Register */ 331#define MAC_ADDR8 0x60A0UL /* MAC Address 8 Register */ 332#define MAC_AFILT0 0x60A4UL /* Address Filter 0 Register */ 333#define MAC_AFILT1 0x60A8UL /* Address Filter 1 Register */ 334#define MAC_AFILT2 0x60ACUL /* Address Filter 2 Register */ 335#define MAC_AF21MSK 0x60B0UL /* Address Filter 2&1 Mask Reg */ 336#define MAC_AF0MSK 0x60B4UL /* Address Filter 0 Mask Reg */ 337#define MAC_HASH0 0x60C0UL /* Hash Table 0 Register */ 338#define MAC_HASH1 0x60C4UL /* Hash Table 1 Register */ 339#define MAC_HASH2 0x60C8UL /* Hash Table 2 Register */ 340#define MAC_HASH3 0x60CCUL /* Hash Table 3 Register */ 341#define MAC_HASH4 0x60D0UL /* Hash Table 4 Register */ 342#define MAC_HASH5 0x60D4UL /* Hash Table 5 Register */ 343#define MAC_HASH6 0x60D8UL /* Hash Table 6 Register */ 344#define MAC_HASH7 0x60DCUL /* Hash Table 7 Register */ 345#define MAC_HASH8 0x60E0UL /* Hash Table 8 Register */ 346#define MAC_HASH9 0x60E4UL /* Hash Table 9 Register */ 347#define MAC_HASH10 0x60E8UL /* Hash Table 10 Register */ 348#define MAC_HASH11 0x60ECUL /* Hash Table 11 Register */ 349#define MAC_HASH12 0x60F0UL /* Hash Table 12 Register */ 350#define MAC_HASH13 0x60F4UL /* Hash Table 13 Register */ 351#define MAC_HASH14 0x60F8UL /* Hash Table 14 Register */ 352#define MAC_HASH15 0x60FCUL /* Hash Table 15 Register */ 353#define MAC_NCOLL 0x6100UL /* Normal Collision Counter */ 354#define MAC_FASUCC 0x6104UL /* First Attmpt. Succ Coll Ctr. */ 355#define MAC_ECOLL 0x6108UL /* Excessive Collision Counter */ 356#define MAC_LCOLL 0x610CUL /* Late Collision Counter */ 357#define MAC_DTIMER 0x6110UL /* Defer Timer */ 358#define MAC_PATMPS 0x6114UL /* Peak Attempts Register */ 359#define MAC_RFCTR 0x6118UL /* Receive Frame Counter */ 360#define MAC_LERR 0x611CUL /* Length Error Counter */ 361#define MAC_AERR 0x6120UL /* Alignment Error Counter */ 362#define MAC_FCSERR 0x6124UL /* FCS Error Counter */ 363#define MAC_RXCVERR 0x6128UL /* RX code Violation Error Ctr */ 364#define MAC_RANDSEED 0x6130UL /* Random Number Seed Register */ 365#define MAC_SMACHINE 0x6134UL /* State Machine Register */ 366 367/* TX MAC Software Reset Command. */ 368#define MAC_TXRST_CMD 0x00000001 /* Start sw reset, self-clears */ 369 370/* RX MAC Software Reset Command. */ 371#define MAC_RXRST_CMD 0x00000001 /* Start sw reset, self-clears */ 372 373/* Send Pause Command. */ 374#define MAC_SNDPAUSE_TS 0x0000ffff /* The pause_time operand used in 375 * Send_Pause and flow-control 376 * handshakes. 377 */ 378#define MAC_SNDPAUSE_SP 0x00010000 /* Setting this bit instructs the MAC 379 * to send a Pause Flow Control 380 * frame onto the network. 381 */ 382 383/* TX MAC Status Register. */ 384#define MAC_TXSTAT_XMIT 0x00000001 /* Frame Transmitted */ 385#define MAC_TXSTAT_URUN 0x00000002 /* TX Underrun */ 386#define MAC_TXSTAT_MPE 0x00000004 /* Max Packet Size Error */ 387#define MAC_TXSTAT_NCE 0x00000008 /* Normal Collision Cntr Expire */ 388#define MAC_TXSTAT_ECE 0x00000010 /* Excess Collision Cntr Expire */ 389#define MAC_TXSTAT_LCE 0x00000020 /* Late Collision Cntr Expire */ 390#define MAC_TXSTAT_FCE 0x00000040 /* First Collision Cntr Expire */ 391#define MAC_TXSTAT_DTE 0x00000080 /* Defer Timer Expire */ 392#define MAC_TXSTAT_PCE 0x00000100 /* Peak Attempts Cntr Expire */ 393 394/* RX MAC Status Register. */ 395#define MAC_RXSTAT_RCV 0x00000001 /* Frame Received */ 396#define MAC_RXSTAT_OFLW 0x00000002 /* Receive Overflow */ 397#define MAC_RXSTAT_FCE 0x00000004 /* Frame Cntr Expire */ 398#define MAC_RXSTAT_ACE 0x00000008 /* Align Error Cntr Expire */ 399#define MAC_RXSTAT_CCE 0x00000010 /* CRC Error Cntr Expire */ 400#define MAC_RXSTAT_LCE 0x00000020 /* Length Error Cntr Expire */ 401#define MAC_RXSTAT_VCE 0x00000040 /* Code Violation Cntr Expire */ 402 403/* MAC Control Status Register. */ 404#define MAC_CSTAT_PRCV 0x00000001 /* Pause Received */ 405#define MAC_CSTAT_PS 0x00000002 /* Paused State */ 406#define MAC_CSTAT_NPS 0x00000004 /* Not Paused State */ 407#define MAC_CSTAT_PTR 0xffff0000 /* Pause Time Received */ 408 409/* The layout of the MAC_{TX,RX,C}MASK registers is identical to that 410 * of MAC_{TX,RX,C}STAT. Bits set in MAC_{TX,RX,C}MASK will prevent 411 * that interrupt type from being signalled to front end of GEM. For 412 * the interrupt to actually get sent to the cpu, it is necessary to 413 * properly set the appropriate GREG_IMASK_{TX,RX,}MAC bits as well. 414 */ 415 416/* TX MAC Configuration Register. 417 * 418 * NOTE: The TX MAC Enable bit must be cleared and polled until 419 * zero before any other bits in this register are changed. 420 * 421 * Also, enabling the Carrier Extension feature of GEM is 422 * a 3 step process 1) Set TX Carrier Extension 2) Set 423 * RX Carrier Extension 3) Set Slot Time to 0x200. This 424 * mode must be enabled when in half-duplex at 1Gbps, else 425 * it must be disabled. 426 */ 427#define MAC_TXCFG_ENAB 0x00000001 /* TX MAC Enable */ 428#define MAC_TXCFG_ICS 0x00000002 /* Ignore Carrier Sense */ 429#define MAC_TXCFG_ICOLL 0x00000004 /* Ignore Collisions */ 430#define MAC_TXCFG_EIPG0 0x00000008 /* Enable IPG0 */ 431#define MAC_TXCFG_NGU 0x00000010 /* Never Give Up */ 432#define MAC_TXCFG_NGUL 0x00000020 /* Never Give Up Limit */ 433#define MAC_TXCFG_NBO 0x00000040 /* No Backoff */ 434#define MAC_TXCFG_SD 0x00000080 /* Slow Down */ 435#define MAC_TXCFG_NFCS 0x00000100 /* No FCS */ 436#define MAC_TXCFG_TCE 0x00000200 /* TX Carrier Extension */ 437 438/* RX MAC Configuration Register. 439 * 440 * NOTE: The RX MAC Enable bit must be cleared and polled until 441 * zero before any other bits in this register are changed. 442 * 443 * Similar rules apply to the Hash Filter Enable bit when 444 * programming the hash table registers, and the Address Filter 445 * Enable bit when programming the address filter registers. 446 */ 447#define MAC_RXCFG_ENAB 0x00000001 /* RX MAC Enable */ 448#define MAC_RXCFG_SPAD 0x00000002 /* Strip Pad */ 449#define MAC_RXCFG_SFCS 0x00000004 /* Strip FCS */ 450#define MAC_RXCFG_PROM 0x00000008 /* Promiscuous Mode */ 451#define MAC_RXCFG_PGRP 0x00000010 /* Promiscuous Group */ 452#define MAC_RXCFG_HFE 0x00000020 /* Hash Filter Enable */ 453#define MAC_RXCFG_AFE 0x00000040 /* Address Filter Enable */ 454#define MAC_RXCFG_DDE 0x00000080 /* Disable Discard on Error */ 455#define MAC_RXCFG_RCE 0x00000100 /* RX Carrier Extension */ 456 457/* MAC Control Config Register. */ 458#define MAC_MCCFG_SPE 0x00000001 /* Send Pause Enable */ 459#define MAC_MCCFG_RPE 0x00000002 /* Receive Pause Enable */ 460#define MAC_MCCFG_PMC 0x00000004 /* Pass MAC Control */ 461 462/* XIF Configuration Register. 463 * 464 * NOTE: When leaving or entering loopback mode, a global hardware 465 * init of GEM should be performed. 466 */ 467#define MAC_XIFCFG_OE 0x00000001 /* MII TX Output Driver Enable */ 468#define MAC_XIFCFG_LBCK 0x00000002 /* Loopback TX to RX */ 469#define MAC_XIFCFG_DISE 0x00000004 /* Disable RX path during TX */ 470#define MAC_XIFCFG_GMII 0x00000008 /* Use GMII clocks + datapath */ 471#define MAC_XIFCFG_MBOE 0x00000010 /* Controls MII_BUF_EN pin */ 472#define MAC_XIFCFG_LLED 0x00000020 /* Force LINKLED# active (low) */ 473#define MAC_XIFCFG_FLED 0x00000040 /* Force FDPLXLED# active (low) */ 474 475/* InterPacketGap0 Register. This 8-bit value is used as an extension 476 * to the InterPacketGap1 Register. Specifically it contributes to the 477 * timing of the RX-to-TX IPG. This value is ignored and presumed to 478 * be zero for TX-to-TX IPG calculations and/or when the Enable IPG0 bit 479 * is cleared in the TX MAC Configuration Register. 480 * 481 * This value in this register in terms of media byte time. 482 * 483 * Recommended value: 0x00 484 */ 485 486/* InterPacketGap1 Register. This 8-bit value defines the first 2/3 487 * portion of the Inter Packet Gap. 488 * 489 * This value in this register in terms of media byte time. 490 * 491 * Recommended value: 0x08 492 */ 493 494/* InterPacketGap2 Register. This 8-bit value defines the second 1/3 495 * portion of the Inter Packet Gap. 496 * 497 * This value in this register in terms of media byte time. 498 * 499 * Recommended value: 0x04 500 */ 501 502/* Slot Time Register. This 10-bit value specifies the slot time 503 * parameter in units of media byte time. It determines the physical 504 * span of the network. 505 * 506 * Recommended value: 0x40 507 */ 508 509/* Minimum Frame Size Register. This 10-bit register specifies the 510 * smallest sized frame the TXMAC will send onto the medium, and the 511 * RXMAC will receive from the medium. 512 * 513 * Recommended value: 0x40 514 */ 515 516/* Maximum Frame and Burst Size Register. 517 * 518 * This register specifies two things. First it specifies the maximum 519 * sized frame the TXMAC will send and the RXMAC will recognize as 520 * valid. Second, it specifies the maximum run length of a burst of 521 * packets sent in half-duplex gigabit modes. 522 * 523 * Recommended value: 0x200005ee 524 */ 525#define MAC_MAXFSZ_MFS 0x00007fff /* Max Frame Size */ 526#define MAC_MAXFSZ_MBS 0x7fff0000 /* Max Burst Size */ 527 528/* PA Size Register. This 10-bit register specifies the number of preamble 529 * bytes which will be transmitted at the beginning of each frame. A 530 * value of two or greater should be programmed here. 531 * 532 * Recommended value: 0x07 533 */ 534 535/* Jam Size Register. This 4-bit register specifies the duration of 536 * the jam in units of media byte time. 537 * 538 * Recommended value: 0x04 539 */ 540 541/* Attempts Limit Register. This 8-bit register specifies the number 542 * of attempts that the TXMAC will make to transmit a frame, before it 543 * resets its Attempts Counter. After reaching the Attempts Limit the 544 * TXMAC may or may not drop the frame, as determined by the NGU 545 * (Never Give Up) and NGUL (Never Give Up Limit) bits in the TXMAC 546 * Configuration Register. 547 * 548 * Recommended value: 0x10 549 */ 550 551/* MAX Control Type Register. This 16-bit register specifies the 552 * "type" field of a MAC Control frame. The TXMAC uses this field to 553 * encapsulate the MAC Control frame for transmission, and the RXMAC 554 * uses it for decoding valid MAC Control frames received from the 555 * network. 556 * 557 * Recommended value: 0x8808 558 */ 559 560/* MAC Address Registers. Each of these registers specify the 561 * ethernet MAC of the interface, 16-bits at a time. Register 562 * 0 specifies bits [47:32], register 1 bits [31:16], and register 563 * 2 bits [15:0]. 564 * 565 * Registers 3 through and including 5 specify an alternate 566 * MAC address for the interface. 567 * 568 * Registers 6 through and including 8 specify the MAC Control 569 * Address, which must be the reserved multicast address for MAC 570 * Control frames. 571 * 572 * Example: To program primary station address a:b:c:d:e:f into 573 * the chip. 574 * MAC_Address_2 = (a << 8) | b 575 * MAC_Address_1 = (c << 8) | d 576 * MAC_Address_0 = (e << 8) | f 577 */ 578 579/* Address Filter Registers. Registers 0 through 2 specify bit 580 * fields [47:32] through [15:0], respectively, of the address 581 * filter. The Address Filter 2&1 Mask Register denotes the 8-bit 582 * nibble mask for Address Filter Registers 2 and 1. The Address 583 * Filter 0 Mask Register denotes the 16-bit mask for the Address 584 * Filter Register 0. 585 */ 586 587/* Hash Table Registers. Registers 0 through 15 specify bit fields 588 * [255:240] through [15:0], respectively, of the hash table. 589 */ 590 591/* Statistics Registers. All of these registers are 16-bits and 592 * track occurrences of a specific event. GEM can be configured 593 * to interrupt the host cpu when any of these counters overflow. 594 * They should all be explicitly initialized to zero when the interface 595 * is brought up. 596 */ 597 598/* Random Number Seed Register. This 10-bit value is used as the 599 * RNG seed inside GEM for the CSMA/CD backoff algorithm. It is 600 * recommended to program this register to the 10 LSB of the 601 * interfaces MAC address. 602 */ 603 604/* Pause Timer, read-only. This 16-bit timer is used to time the pause 605 * interval as indicated by a received pause flow control frame. 606 * A non-zero value in this timer indicates that the MAC is currently in 607 * the paused state. 608 */ 609 610/* MIF Registers */ 611#define MIF_BBCLK 0x6200UL /* MIF Bit-Bang Clock */ 612#define MIF_BBDATA 0x6204UL /* MIF Bit-Band Data */ 613#define MIF_BBOENAB 0x6208UL /* MIF Bit-Bang Output Enable */ 614#define MIF_FRAME 0x620CUL /* MIF Frame/Output Register */ 615#define MIF_CFG 0x6210UL /* MIF Configuration Register */ 616#define MIF_MASK 0x6214UL /* MIF Mask Register */ 617#define MIF_STATUS 0x6218UL /* MIF Status Register */ 618#define MIF_SMACHINE 0x621CUL /* MIF State Machine Register */ 619 620/* MIF Bit-Bang Clock. This 1-bit register is used to generate the 621 * MDC clock waveform on the MII Management Interface when the MIF is 622 * programmed in the "Bit-Bang" mode. Writing a '1' after a '0' into 623 * this register will create a rising edge on the MDC, while writing 624 * a '0' after a '1' will create a falling edge. For every bit that 625 * is transferred on the management interface, both edges have to be 626 * generated. 627 */ 628 629/* MIF Bit-Bang Data. This 1-bit register is used to generate the 630 * outgoing data (MDO) on the MII Management Interface when the MIF 631 * is programmed in the "Bit-Bang" mode. The daa will be steered to the 632 * appropriate MDIO based on the state of the PHY_Select bit in the MIF 633 * Configuration Register. 634 */ 635 636/* MIF Big-Band Output Enable. THis 1-bit register is used to enable 637 * ('1') or disable ('0') the I-directional driver on the MII when the 638 * MIF is programmed in the "Bit-Bang" mode. The MDIO should be enabled 639 * when data bits are transferred from the MIF to the transceiver, and it 640 * should be disabled when the interface is idle or when data bits are 641 * transferred from the transceiver to the MIF (data portion of a read 642 * instruction). Only one MDIO will be enabled at a given time, depending 643 * on the state of the PHY_Select bit in the MIF Configuration Register. 644 */ 645 646/* MIF Configuration Register. This 15-bit register controls the operation 647 * of the MIF. 648 */ 649#define MIF_CFG_PSELECT 0x00000001 /* Xcvr slct: 0=mdio0 1=mdio1 */ 650#define MIF_CFG_POLL 0x00000002 /* Enable polling mechanism */ 651#define MIF_CFG_BBMODE 0x00000004 /* 1=bit-bang 0=frame mode */ 652#define MIF_CFG_PRADDR 0x000000f8 /* Xcvr poll register address */ 653#define MIF_CFG_MDI0 0x00000100 /* MDIO_0 present or read-bit */ 654#define MIF_CFG_MDI1 0x00000200 /* MDIO_1 present or read-bit */ 655#define MIF_CFG_PPADDR 0x00007c00 /* Xcvr poll PHY address */ 656 657/* MIF Frame/Output Register. This 32-bit register allows the host to 658 * communicate with a transceiver in frame mode (as opposed to big-bang 659 * mode). Writes by the host specify an instrution. After being issued 660 * the host must poll this register for completion. Also, after 661 * completion this register holds the data returned by the transceiver 662 * if applicable. 663 */ 664#define MIF_FRAME_ST 0xc0000000 /* STart of frame */ 665#define MIF_FRAME_OP 0x30000000 /* OPcode */ 666#define MIF_FRAME_PHYAD 0x0f800000 /* PHY ADdress */ 667#define MIF_FRAME_REGAD 0x007c0000 /* REGister ADdress */ 668#define MIF_FRAME_TAMSB 0x00020000 /* Turn Around MSB */ 669#define MIF_FRAME_TALSB 0x00010000 /* Turn Around LSB */ 670#define MIF_FRAME_DATA 0x0000ffff /* Instruction Payload */ 671 672/* MIF Status Register. This register reports status when the MIF is 673 * operating in the poll mode. The poll status field is auto-clearing 674 * on read. 675 */ 676#define MIF_STATUS_DATA 0xffff0000 /* Live image of XCVR reg */ 677#define MIF_STATUS_STAT 0x0000ffff /* Which bits have changed */ 678 679/* MIF Mask Register. This 16-bit register is used when in poll mode 680 * to say which bits of the polled register will cause an interrupt 681 * when changed. 682 */ 683 684/* PCS/Serialink Registers */ 685#define PCS_MIICTRL 0x9000UL /* PCS MII Control Register */ 686#define PCS_MIISTAT 0x9004UL /* PCS MII Status Register */ 687#define PCS_MIIADV 0x9008UL /* PCS MII Advertisement Reg */ 688#define PCS_MIILP 0x900CUL /* PCS MII Link Partner Ability */ 689#define PCS_CFG 0x9010UL /* PCS Configuration Register */ 690#define PCS_SMACHINE 0x9014UL /* PCS State Machine Register */ 691#define PCS_ISTAT 0x9018UL /* PCS Interrupt Status Reg */ 692#define PCS_DMODE 0x9050UL /* Datapath Mode Register */ 693#define PCS_SCTRL 0x9054UL /* Serialink Control Register */ 694#define PCS_SOS 0x9058UL /* Shared Output Select Reg */ 695#define PCS_SSTATE 0x905CUL /* Serialink State Register */ 696 697/* PCD MII Control Register. */ 698#define PCS_MIICTRL_SPD 0x00000040 /* Read as one, writes ignored */ 699#define PCS_MIICTRL_CT 0x00000080 /* Force COL signal active */ 700#define PCS_MIICTRL_DM 0x00000100 /* Duplex mode, forced low */ 701#define PCS_MIICTRL_RAN 0x00000200 /* Restart auto-neg, self clear */ 702#define PCS_MIICTRL_ISO 0x00000400 /* Read as zero, writes ignored */ 703#define PCS_MIICTRL_PD 0x00000800 /* Read as zero, writes ignored */ 704#define PCS_MIICTRL_ANE 0x00001000 /* Auto-neg enable */ 705#define PCS_MIICTRL_SS 0x00002000 /* Read as zero, writes ignored */ 706#define PCS_MIICTRL_WB 0x00004000 /* Wrapback, loopback at 10-bit 707 * input side of Serialink 708 */ 709#define PCS_MIICTRL_RST 0x00008000 /* Resets PCS, self clearing */ 710 711/* PCS MII Status Register. */ 712#define PCS_MIISTAT_EC 0x00000001 /* Ext Capability: Read as zero */ 713#define PCS_MIISTAT_JD 0x00000002 /* Jabber Detect: Read as zero */ 714#define PCS_MIISTAT_LS 0x00000004 /* Link Status: 1=up 0=down */ 715#define PCS_MIISTAT_ANA 0x00000008 /* Auto-neg Ability, always 1 */ 716#define PCS_MIISTAT_RF 0x00000010 /* Remote Fault */ 717#define PCS_MIISTAT_ANC 0x00000020 /* Auto-neg complete */ 718#define PCS_MIISTAT_ES 0x00000100 /* Extended Status, always 1 */ 719 720/* PCS MII Advertisement Register. */ 721#define PCS_MIIADV_FD 0x00000020 /* Advertise Full Duplex */ 722#define PCS_MIIADV_HD 0x00000040 /* Advertise Half Duplex */ 723#define PCS_MIIADV_SP 0x00000080 /* Advertise Symmetric Pause */ 724#define PCS_MIIADV_AP 0x00000100 /* Advertise Asymmetric Pause */ 725#define PCS_MIIADV_RF 0x00003000 /* Remote Fault */ 726#define PCS_MIIADV_ACK 0x00004000 /* Read-only */ 727#define PCS_MIIADV_NP 0x00008000 /* Next-page, forced low */ 728 729/* PCS MII Link Partner Ability Register. This register is equivalent 730 * to the Link Partnet Ability Register of the standard MII register set. 731 * It's layout corresponds to the PCS MII Advertisement Register. 732 */ 733 734/* PCS Configuration Register. */ 735#define PCS_CFG_ENABLE 0x00000001 /* Must be zero while changing 736 * PCS MII advertisement reg. 737 */ 738#define PCS_CFG_SDO 0x00000002 /* Signal detect override */ 739#define PCS_CFG_SDL 0x00000004 /* Signal detect active low */ 740#define PCS_CFG_JS 0x00000018 /* Jitter-study: 741 * 0 = normal operation 742 * 1 = high-frequency test pattern 743 * 2 = low-frequency test pattern 744 * 3 = reserved 745 */ 746#define PCS_CFG_TO 0x00000020 /* 10ms auto-neg timer override */ 747 748/* PCS Interrupt Status Register. This register is self-clearing 749 * when read. 750 */ 751#define PCS_ISTAT_LSC 0x00000004 /* Link Status Change */ 752 753/* Datapath Mode Register. */ 754#define PCS_DMODE_SM 0x00000001 /* 1 = use internal Serialink */ 755#define PCS_DMODE_ESM 0x00000002 /* External SERDES mode */ 756#define PCS_DMODE_MGM 0x00000004 /* MII/GMII mode */ 757#define PCS_DMODE_GMOE 0x00000008 /* GMII Output Enable */ 758 759/* Serialink Control Register. 760 * 761 * NOTE: When in SERDES mode, the loopback bit has inverse logic. 762 */ 763#define PCS_SCTRL_LOOP 0x00000001 /* Loopback enable */ 764#define PCS_SCTRL_ESCD 0x00000002 /* Enable sync char detection */ 765#define PCS_SCTRL_LOCK 0x00000004 /* Lock to reference clock */ 766#define PCS_SCTRL_EMP 0x00000018 /* Output driver emphasis */ 767#define PCS_SCTRL_STEST 0x000001c0 /* Self test patterns */ 768#define PCS_SCTRL_PDWN 0x00000200 /* Software power-down */ 769#define PCS_SCTRL_RXZ 0x00000c00 /* PLL input to Serialink */ 770#define PCS_SCTRL_RXP 0x00003000 /* PLL input to Serialink */ 771#define PCS_SCTRL_TXZ 0x0000c000 /* PLL input to Serialink */ 772#define PCS_SCTRL_TXP 0x00030000 /* PLL input to Serialink */ 773 774/* Shared Output Select Register. For test and debug, allows multiplexing 775 * test outputs into the PROM address pins. Set to zero for normal 776 * operation. 777 */ 778#define PCS_SOS_PADDR 0x00000003 /* PROM Address */ 779 780/* PROM Image Space */ 781#define PROM_START 0x100000UL /* Expansion ROM run time access*/ 782#define PROM_SIZE 0x0fffffUL /* Size of ROM */ 783#define PROM_END 0x200000UL /* End of ROM */ 784 785/* MII definitions missing from mii.h */ 786 787#define BMCR_SPD2 0x0040 /* Gigabit enable? (bcm5411) */ 788#define LPA_PAUSE 0x0400 789 790/* More PHY registers (specific to Broadcom models) */ 791 792/* MII BCM5201 MULTIPHY interrupt register */ 793#define MII_BCM5201_INTERRUPT 0x1A 794#define MII_BCM5201_INTERRUPT_INTENABLE 0x4000 795 796#define MII_BCM5201_AUXMODE2 0x1B 797#define MII_BCM5201_AUXMODE2_LOWPOWER 0x0008 798 799#define MII_BCM5201_MULTIPHY 0x1E 800 801/* MII BCM5201 MULTIPHY register bits */ 802#define MII_BCM5201_MULTIPHY_SERIALMODE 0x0002 803#define MII_BCM5201_MULTIPHY_SUPERISOLATE 0x0008 804 805/* MII BCM5400 1000-BASET Control register */ 806#define MII_BCM5400_GB_CONTROL 0x09 807#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200 808 809/* MII BCM5400 AUXCONTROL register */ 810#define MII_BCM5400_AUXCONTROL 0x18 811#define MII_BCM5400_AUXCONTROL_PWR10BASET 0x0004 812 813/* MII BCM5400 AUXSTATUS register */ 814#define MII_BCM5400_AUXSTATUS 0x19 815#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK 0x0700 816#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT 8 817 818/* When it can, GEM internally caches 4 aligned TX descriptors 819 * at a time, so that it can use full cacheline DMA reads. 820 * 821 * Note that unlike HME, there is no ownership bit in the descriptor 822 * control word. The same functionality is obtained via the TX-Kick 823 * and TX-Complete registers. As a result, GEM need not write back 824 * updated values to the TX descriptor ring, it only performs reads. 825 * 826 * Since TX descriptors are never modified by GEM, the driver can 827 * use the buffer DMA address as a place to keep track of allocated 828 * DMA mappings for a transmitted packet. 829 */ 830struct gem_txd { 831 __le64 control_word; 832 __le64 buffer; 833}; 834 835#define TXDCTRL_BUFSZ 0x0000000000007fffULL /* Buffer Size */ 836#define TXDCTRL_CSTART 0x00000000001f8000ULL /* CSUM Start Offset */ 837#define TXDCTRL_COFF 0x000000001fe00000ULL /* CSUM Stuff Offset */ 838#define TXDCTRL_CENAB 0x0000000020000000ULL /* CSUM Enable */ 839#define TXDCTRL_EOF 0x0000000040000000ULL /* End of Frame */ 840#define TXDCTRL_SOF 0x0000000080000000ULL /* Start of Frame */ 841#define TXDCTRL_INTME 0x0000000100000000ULL /* "Interrupt Me" */ 842#define TXDCTRL_NOCRC 0x0000000200000000ULL /* No CRC Present */ 843 844/* GEM requires that RX descriptors are provided four at a time, 845 * aligned. Also, the RX ring may not wrap around. This means that 846 * there will be at least 4 unused descriptor entries in the middle 847 * of the RX ring at all times. 848 * 849 * Similar to HME, GEM assumes that it can write garbage bytes before 850 * the beginning of the buffer and right after the end in order to DMA 851 * whole cachelines. 852 * 853 * Unlike for TX, GEM does update the status word in the RX descriptors 854 * when packets arrive. Therefore an ownership bit does exist in the 855 * RX descriptors. It is advisory, GEM clears it but does not check 856 * it in any way. So when buffers are posted to the RX ring (via the 857 * RX Kick register) by the driver it must make sure the buffers are 858 * truly ready and that the ownership bits are set properly. 859 * 860 * Even though GEM modifies the RX descriptors, it guarantees that the 861 * buffer DMA address field will stay the same when it performs these 862 * updates. Therefore it can be used to keep track of DMA mappings 863 * by the host driver just as in the TX descriptor case above. 864 */ 865struct gem_rxd { 866 __le64 status_word; 867 __le64 buffer; 868}; 869 870#define RXDCTRL_TCPCSUM 0x000000000000ffffULL /* TCP Pseudo-CSUM */ 871#define RXDCTRL_BUFSZ 0x000000007fff0000ULL /* Buffer Size */ 872#define RXDCTRL_OWN 0x0000000080000000ULL /* GEM owns this entry */ 873#define RXDCTRL_HASHVAL 0x0ffff00000000000ULL /* Hash Value */ 874#define RXDCTRL_HPASS 0x1000000000000000ULL /* Passed Hash Filter */ 875#define RXDCTRL_ALTMAC 0x2000000000000000ULL /* Matched ALT MAC */ 876#define RXDCTRL_BAD 0x4000000000000000ULL /* Frame has bad CRC */ 877 878#define RXDCTRL_FRESH(gp) \ 879 ((((RX_BUF_ALLOC_SIZE(gp) - RX_OFFSET) << 16) & RXDCTRL_BUFSZ) | \ 880 RXDCTRL_OWN) 881 882#define TX_RING_SIZE 128 883#define RX_RING_SIZE 128 884 885#if TX_RING_SIZE == 32 886#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_32 887#elif TX_RING_SIZE == 64 888#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_64 889#elif TX_RING_SIZE == 128 890#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_128 891#elif TX_RING_SIZE == 256 892#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_256 893#elif TX_RING_SIZE == 512 894#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_512 895#elif TX_RING_SIZE == 1024 896#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_1K 897#elif TX_RING_SIZE == 2048 898#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_2K 899#elif TX_RING_SIZE == 4096 900#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_4K 901#elif TX_RING_SIZE == 8192 902#define TXDMA_CFG_BASE TXDMA_CFG_RINGSZ_8K 903#else 904#error TX_RING_SIZE value is illegal... 905#endif 906 907#if RX_RING_SIZE == 32 908#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_32 909#elif RX_RING_SIZE == 64 910#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_64 911#elif RX_RING_SIZE == 128 912#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_128 913#elif RX_RING_SIZE == 256 914#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_256 915#elif RX_RING_SIZE == 512 916#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_512 917#elif RX_RING_SIZE == 1024 918#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_1K 919#elif RX_RING_SIZE == 2048 920#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_2K 921#elif RX_RING_SIZE == 4096 922#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_4K 923#elif RX_RING_SIZE == 8192 924#define RXDMA_CFG_BASE RXDMA_CFG_RINGSZ_8K 925#else 926#error RX_RING_SIZE is illegal... 927#endif 928 929#define NEXT_TX(N) (((N) + 1) & (TX_RING_SIZE - 1)) 930#define NEXT_RX(N) (((N) + 1) & (RX_RING_SIZE - 1)) 931 932#define TX_BUFFS_AVAIL(GP) \ 933 (((GP)->tx_old <= (GP)->tx_new) ? \ 934 (GP)->tx_old + (TX_RING_SIZE - 1) - (GP)->tx_new : \ 935 (GP)->tx_old - (GP)->tx_new - 1) 936 937#define RX_OFFSET 2 938#define RX_BUF_ALLOC_SIZE(gp) ((gp)->rx_buf_sz + 28 + RX_OFFSET + 64) 939 940#define RX_COPY_THRESHOLD 256 941 942#if TX_RING_SIZE < 128 943#define INIT_BLOCK_TX_RING_SIZE 128 944#else 945#define INIT_BLOCK_TX_RING_SIZE TX_RING_SIZE 946#endif 947 948#if RX_RING_SIZE < 128 949#define INIT_BLOCK_RX_RING_SIZE 128 950#else 951#define INIT_BLOCK_RX_RING_SIZE RX_RING_SIZE 952#endif 953 954struct gem_init_block { 955 struct gem_txd txd[INIT_BLOCK_TX_RING_SIZE]; 956 struct gem_rxd rxd[INIT_BLOCK_RX_RING_SIZE]; 957}; 958 959enum gem_phy_type { 960 phy_mii_mdio0, 961 phy_mii_mdio1, 962 phy_serialink, 963 phy_serdes, 964}; 965 966enum link_state { 967 link_down = 0, /* No link, will retry */ 968 link_aneg, /* Autoneg in progress */ 969 link_force_try, /* Try Forced link speed */ 970 link_force_ret, /* Forced mode worked, retrying autoneg */ 971 link_force_ok, /* Stay in forced mode */ 972 link_up /* Link is up */ 973}; 974 975struct gem { 976 spinlock_t lock; 977 spinlock_t tx_lock; 978 void __iomem *regs; 979 int rx_new, rx_old; 980 int tx_new, tx_old; 981 982 unsigned int has_wol : 1; /* chip supports wake-on-lan */ 983 unsigned int asleep : 1; /* chip asleep, protected by pm_mutex */ 984 unsigned int asleep_wol : 1; /* was asleep with WOL enabled */ 985 unsigned int opened : 1; /* driver opened, protected by pm_mutex */ 986 unsigned int running : 1; /* chip running, protected by lock */ 987 988 /* cell enable count, protected by lock */ 989 int cell_enabled; 990 991 struct mutex pm_mutex; 992 993 u32 msg_enable; 994 u32 status; 995 996 struct napi_struct napi; 997 998 int tx_fifo_sz; 999 int rx_fifo_sz; 1000 int rx_pause_off;
1001 int rx_pause_on; 1002 int rx_buf_sz; 1003 u64 pause_entered; 1004 u16 pause_last_time_recvd; 1005 u32 mac_rx_cfg; 1006 u32 swrst_base; 1007 1008 int want_autoneg; 1009 int last_forced_speed; 1010 enum link_state lstate; 1011 struct timer_list link_timer; 1012 int timer_ticks; 1013 int wake_on_lan; 1014 struct work_struct reset_task; 1015 volatile int reset_task_pending; 1016 1017 enum gem_phy_type phy_type; 1018 struct mii_phy phy_mii; 1019 int mii_phy_addr; 1020 1021 struct gem_init_block *init_block; 1022 struct sk_buff *rx_skbs[RX_RING_SIZE]; 1023 struct sk_buff *tx_skbs[TX_RING_SIZE]; 1024 dma_addr_t gblock_dvma; 1025 1026 struct pci_dev *pdev; 1027 struct net_device *dev; 1028#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_SPARC) 1029 struct device_node *of_node; 1030#endif 1031}; 1032 1033#define found_mii_phy(gp) ((gp->phy_type == phy_mii_mdio0 || gp->phy_type == phy_mii_mdio1) && \ 1034 gp->phy_mii.def && gp->phy_mii.def->ops) 1035 1036#define ALIGNED_RX_SKB_ADDR(addr) \ 1037 ((((unsigned long)(addr) + (64UL - 1UL)) & ~(64UL - 1UL)) - (unsigned long)(addr)) 1038static __inline__ struct sk_buff *gem_alloc_skb(int size, 1039 gfp_t gfp_flags) 1040{ 1041 struct sk_buff *skb = alloc_skb(size + 64, gfp_flags); 1042 1043 if (skb) { 1044 int offset = (int) ALIGNED_RX_SKB_ADDR(skb->data); 1045 if (offset) 1046 skb_reserve(skb, offset); 1047 } 1048 1049 return skb; 1050} 1051 1052#endif /* _SUNGEM_H */ 1053