/*
 * LCD driver for MIPI DBI-C / DCS compatible LCDs
 *
 * Copyright (C) 2006 Nokia Corporation
 * Author: Imre Deak <imre.deak@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 */
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>

#include <plat/lcd_mipid.h>

#include "omapfb.h"

#define MIPID_MODULE_NAME               "lcd_mipid"

#define MIPID_CMD_READ_DISP_ID          0x04
#define MIPID_CMD_READ_RED              0x06
#define MIPID_CMD_READ_GREEN            0x07
#define MIPID_CMD_READ_BLUE             0x08
#define MIPID_CMD_READ_DISP_STATUS      0x09
#define MIPID_CMD_RDDSDR                0x0F
#define MIPID_CMD_SLEEP_IN              0x10
#define MIPID_CMD_SLEEP_OUT             0x11
#define MIPID_CMD_DISP_OFF              0x28
#define MIPID_CMD_DISP_ON               0x29

#define MIPID_ESD_CHECK_PERIOD          msecs_to_jiffies(5000)

#define to_mipid_device(p)              container_of(p, struct mipid_device, \
                                                panel)
struct mipid_device {
        int             enabled;
        int             revision;
        unsigned int    saved_bklight_level;
        unsigned long   hw_guard_end;           /* next value of jiffies
                                                   when we can issue the
                                                   next sleep in/out command */
        unsigned long   hw_guard_wait;          /* max guard time in jiffies */

        struct omapfb_device    *fbdev;
        struct spi_device       *spi;
        struct mutex            mutex;
        struct lcd_panel        panel;

        struct workqueue_struct *esd_wq;
        struct delayed_work     esd_work;
        void                    (*esd_check)(struct mipid_device *m);
};

static void mipid_transfer(struct mipid_device *md, int cmd, const u8 *wbuf,
                           int wlen, u8 *rbuf, int rlen)
{
        struct spi_message      m;
        struct spi_transfer     *x, xfer[4];
        u16                     w;
        int                     r;

        BUG_ON(md->spi == NULL);

        spi_message_init(&m);

        memset(xfer, 0, sizeof(xfer));
        x = &xfer[0];

        cmd &=  0xff;
        x->tx_buf               = &cmd;
        x->bits_per_word        = 9;
        x->len                  = 2;
        spi_message_add_tail(x, &m);

        if (wlen) {
                x++;
                x->tx_buf               = wbuf;
                x->len                  = wlen;
                x->bits_per_word        = 9;
                spi_message_add_tail(x, &m);
        }

        if (rlen) {
                x++;
                x->rx_buf       = &w;
                x->len          = 1;
                spi_message_add_tail(x, &m);

                if (rlen > 1) {
                        /* Arrange for the extra clock before the first
                         * data bit.
                         */
                        x->bits_per_word = 9;
                        x->len           = 2;

                        x++;
                        x->rx_buf        = &rbuf[1];
                        x->len           = rlen - 1;
                        spi_message_add_tail(x, &m);
                }
        }

        r = spi_sync(md->spi, &m);
        if (r < 0)
                dev_dbg(&md->spi->dev, "spi_sync %d\n", r);

        if (rlen)
                rbuf[0] = w & 0xff;
}

static inline void mipid_cmd(struct mipid_device *md, int cmd)
{
        mipid_transfer(md, cmd, NULL, 0, NULL, 0);
}

static inline void mipid_write(struct mipid_device *md,
                               int reg, const u8 *buf, int len)
{
        mipid_transfer(md, reg, buf, len, NULL, 0);
}

static inline void mipid_read(struct mipid_device *md,
                              int reg, u8 *buf, int len)
{
        mipid_transfer(md, reg, NULL, 0, buf, len);
}

static void set_data_lines(struct mipid_device *md, int data_lines)
{
        u16 par;

        switch (data_lines) {
        case 16:
                par = 0x150;
                break;
        case 18:
                par = 0x160;
                break;
        case 24:
                par = 0x170;
                break;
        }
        mipid_write(md, 0x3a, (u8 *)&par, 2);
}

static void send_init_string(struct mipid_device *md)
{
        u16 initpar[] = { 0x0102, 0x0100, 0x0100 };

        mipid_write(md, 0xc2, (u8 *)initpar, sizeof(initpar));
        set_data_lines(md, md->panel.data_lines);
}

static void hw_guard_start(struct mipid_device *md, int guard_msec)
{
        md->hw_guard_wait = msecs_to_jiffies(guard_msec);
        md->hw_guard_end = jiffies + md->hw_guard_wait;
}

static void hw_guard_wait(struct mipid_device *md)
{
        unsigned long wait = md->hw_guard_end - jiffies;

        if ((long)wait > 0 && wait <= md->hw_guard_wait) {
                set_current_state(TASK_UNINTERRUPTIBLE);
                schedule_timeout(wait);
        }
}

static void set_sleep_mode(struct mipid_device *md, int on)
{
        int cmd, sleep_time = 50;

        if (on)
                cmd = MIPID_CMD_SLEEP_IN;
        else
                cmd = MIPID_CMD_SLEEP_OUT;
        hw_guard_wait(md);
        mipid_cmd(md, cmd);
        hw_guard_start(md, 120);
        /*
         * When we enable the panel, it seems we _have_ to sleep
         * 120 ms before sending the init string. When disabling the
         * panel we'll sleep for the duration of 2 frames, so that the
         * controller can still provide the PCLK,HS,VS signals.
         */
        if (!on)
                sleep_time = 120;
        msleep(sleep_time);
}

static void set_display_state(struct mipid_device *md, int enabled)
{
        int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;

        mipid_cmd(md, cmd);
}

static int mipid_set_bklight_level(struct lcd_panel *panel, unsigned int level)
{
        struct mipid_device *md = to_mipid_device(panel);
        struct mipid_platform_data *pd = md->spi->dev.platform_data;

        if (pd->get_bklight_max == NULL || pd->set_bklight_level == NULL)
                return -ENODEV;
        if (level > pd->get_bklight_max(pd))
                return -EINVAL;
        if (!md->enabled) {
                md->saved_bklight_level = level;
                return 0;
        }
        pd->set_bklight_level(pd, level);

        return 0;
}

static unsigned int mipid_get_bklight_level(struct lcd_panel *panel)
{
        struct mipid_device *md = to_mipid_device(panel);
        struct mipid_platform_data *pd = md->spi->dev.platform_data;

        if (pd->get_bklight_level == NULL)
                return -ENODEV;
        return pd->get_bklight_level(pd);
}

static unsigned int mipid_get_bklight_max(struct lcd_panel *panel)
{
        struct mipid_device *md = to_mipid_device(panel);
        struct mipid_platform_data *pd = md->spi->dev.platform_data;

        if (pd->get_bklight_max == NULL)
                return -ENODEV;

        return pd->get_bklight_max(pd);
}

static unsigned long mipid_get_caps(struct lcd_panel *panel)
{
        return OMAPFB_CAPS_SET_BACKLIGHT;
}

static u16 read_first_pixel(struct mipid_device *md)
{
        u16 pixel;
        u8 red, green, blue;

        mutex_lock(&md->mutex);
        mipid_read(md, MIPID_CMD_READ_RED, &red, 1);
        mipid_read(md, MIPID_CMD_READ_GREEN, &green, 1);
        mipid_read(md, MIPID_CMD_READ_BLUE, &blue, 1);
        mutex_unlock(&md->mutex);

        switch (md->panel.data_lines) {
        case 16:
                pixel = ((red >> 1) << 11) | (green << 5) | (blue >> 1);
                break;
        case 24:
                /* 24 bit -> 16 bit */
                pixel = ((red >> 3) << 11) | ((green >> 2) << 5) |
                        (blue >> 3);
                break;
        default:
                pixel = 0;
                BUG();
        }

        return pixel;
}

static int mipid_run_test(struct lcd_panel *panel, int test_num)
{
        struct mipid_device *md = to_mipid_device(panel);
        static const u16 test_values[4] = {
                0x0000, 0xffff, 0xaaaa, 0x5555,
        };
        int i;

        if (test_num != MIPID_TEST_RGB_LINES)
                return MIPID_TEST_INVALID;

        for (i = 0; i < ARRAY_SIZE(test_values); i++) {
                int delay;
                unsigned long tmo;

                omapfb_write_first_pixel(md->fbdev, test_values[i]);
                tmo = jiffies + msecs_to_jiffies(100);
                delay = 25;
                while (1) {
                        u16 pixel;

                        msleep(delay);
                        pixel = read_first_pixel(md);
                        if (pixel == test_values[i])
                                break;
                        if (time_after(jiffies, tmo)) {
                                dev_err(&md->spi->dev,
                                        "MIPI LCD RGB I/F test failed: "
                                        "expecting %04x, got %04x\n",
                                        test_values[i], pixel);
                                return MIPID_TEST_FAILED;
                        }
                        delay = 10;
                }
        }

        return 0;
}

static void ls041y3_esd_recover(struct mipid_device *md)
{
        dev_err(&md->spi->dev, "performing LCD ESD recovery\n");
        set_sleep_mode(md, 1);
        set_sleep_mode(md, 0);
}

static void ls041y3_esd_check_mode1(struct mipid_device *md)
{
        u8 state1, state2;

        mipid_read(md, MIPID_CMD_RDDSDR, &state1, 1);
        set_sleep_mode(md, 0);
        mipid_read(md, MIPID_CMD_RDDSDR, &state2, 1);
        dev_dbg(&md->spi->dev, "ESD mode 1 state1 %02x state2 %02x\n",
                state1, state2);
        /* Each sleep out command will trigger a self diagnostic and flip
        * Bit6 if the test passes.
        */
        if (!((state1 ^ state2) & (1 << 6)))
                ls041y3_esd_recover(md);
}

static void ls041y3_esd_check_mode2(struct mipid_device *md)
{
        int i;
        u8 rbuf[2];
        static const struct {
                int     cmd;
                int     wlen;
                u16     wbuf[3];
        } *rd, rd_ctrl[7] = {
                { 0xb0, 4, { 0x0101, 0x01fe, } },
                { 0xb1, 4, { 0x01de, 0x0121, } },
                { 0xc2, 4, { 0x0100, 0x0100, } },
                { 0xbd, 2, { 0x0100, } },
                { 0xc2, 4, { 0x01fc, 0x0103, } },
                { 0xb4, 0, },
                { 0x00, 0, },
        };

        rd = rd_ctrl;
        for (i = 0; i < 3; i++, rd++)
                mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);

        udelay(10);
        mipid_read(md, rd->cmd, rbuf, 2);
        rd++;

        for (i = 0; i < 3; i++, rd++) {
                udelay(10);
                mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
        }

        dev_dbg(&md->spi->dev, "ESD mode 2 state %02x\n", rbuf[1]);
        if (rbuf[1] == 0x00)
                ls041y3_esd_recover(md);
}

static void ls041y3_esd_check(struct mipid_device *md)
{
        ls041y3_esd_check_mode1(md);
        if (md->revision >= 0x88)
                ls041y3_esd_check_mode2(md);
}

static void mipid_esd_start_check(struct mipid_device *md)
{
        if (md->esd_check != NULL)
                queue_delayed_work(md->esd_wq, &md->esd_work,
                                   MIPID_ESD_CHECK_PERIOD);
}

static void mipid_esd_stop_check(struct mipid_device *md)
{
        if (md->esd_check != NULL)
                cancel_delayed_work_sync(&md->esd_work);
}

static void mipid_esd_work(struct work_struct *work)
{
        struct mipid_device *md = container_of(work, struct mipid_device,
                                               esd_work.work);

        mutex_lock(&md->mutex);
        md->esd_check(md);
        mutex_unlock(&md->mutex);
        mipid_esd_start_check(md);
}

static int mipid_enable(struct lcd_panel *panel)
{
        struct mipid_device *md = to_mipid_device(panel);

        mutex_lock(&md->mutex);

        if (md->enabled) {
                mutex_unlock(&md->mutex);
                return 0;
        }
        set_sleep_mode(md, 0);
        md->enabled = 1;
        send_init_string(md);
        set_display_state(md, 1);
        mipid_set_bklight_level(panel, md->saved_bklight_level);
        mipid_esd_start_check(md);

        mutex_unlock(&md->mutex);
        return 0;
}

static void mipid_disable(struct lcd_panel *panel)
{
        struct mipid_device *md = to_mipid_device(panel);

        /*
         * A final ESD work might be called before returning,
         * so do this without holding the lock.
         */
        mipid_esd_stop_check(md);
        mutex_lock(&md->mutex);

        if (!md->enabled) {
                mutex_unlock(&md->mutex);
                return;
        }
        md->saved_bklight_level = mipid_get_bklight_level(panel);
        mipid_set_bklight_level(panel, 0);
        set_display_state(md, 0);
        set_sleep_mode(md, 1);
        md->enabled = 0;

        mutex_unlock(&md->mutex);
}

static int panel_enabled(struct mipid_device *md)
{
        u32 disp_status;
        int enabled;

        mipid_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
        disp_status = __be32_to_cpu(disp_status);
        enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
        dev_dbg(&md->spi->dev,
                "LCD panel %senabled by bootloader (status 0x%04x)\n",
                enabled ? "" : "not ", disp_status);
        return enabled;
}

static int mipid_init(struct lcd_panel *panel,
                            struct omapfb_device *fbdev)
{
        struct mipid_device *md = to_mipid_device(panel);

        md->fbdev = fbdev;
        md->esd_wq = create_singlethread_workqueue("mipid_esd");
        if (md->esd_wq == NULL) {
                dev_err(&md->spi->dev, "can't create ESD workqueue\n");
                return -ENOMEM;
        }
        INIT_DELAYED_WORK(&md->esd_work, mipid_esd_work);
        mutex_init(&md->mutex);

        md->enabled = panel_enabled(md);

        if (md->enabled)
                mipid_esd_start_check(md);
        else
                md->saved_bklight_level = mipid_get_bklight_level(panel);

        return 0;
}

static void mipid_cleanup(struct lcd_panel *panel)
{
        struct mipid_device *md = to_mipid_device(panel);

        if (md->enabled)
                mipid_esd_stop_check(md);
        destroy_workqueue(md->esd_wq);
}

static struct lcd_panel mipid_panel = {
        .config         = OMAP_LCDC_PANEL_TFT,

        .bpp            = 16,
        .x_res          = 800,
        .y_res          = 480,
        .pixel_clock    = 21940,
        .hsw            = 50,
        .hfp            = 20,
        .hbp            = 15,
        .vsw            = 2,
        .vfp            = 1,
        .vbp            = 3,

        .init                   = mipid_init,
        .cleanup                = mipid_cleanup,
        .enable                 = mipid_enable,
        .disable                = mipid_disable,
        .get_caps               = mipid_get_caps,
        .set_bklight_level      = mipid_set_bklight_level,
        .get_bklight_level      = mipid_get_bklight_level,
        .get_bklight_max        = mipid_get_bklight_max,
        .run_test               = mipid_run_test,
};

static int mipid_detect(struct mipid_device *md)
{
        struct mipid_platform_data *pdata;
        u8 display_id[3];

        pdata = md->spi->dev.platform_data;
        if (pdata == NULL) {
                dev_err(&md->spi->dev, "missing platform data\n");
                return -ENOENT;
        }

        mipid_read(md, MIPID_CMD_READ_DISP_ID, display_id, 3);
        dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
                display_id[0], display_id[1], display_id[2]);

        switch (display_id[0]) {
        case 0x45:
                md->panel.name = "lph8923";
                break;
        case 0x83:
                md->panel.name = "ls041y3";
                md->esd_check = ls041y3_esd_check;
                break;
        default:
                md->panel.name = "unknown";
                dev_err(&md->spi->dev, "invalid display ID\n");
                return -ENODEV;
        }

        md->revision = display_id[1];
        md->panel.data_lines = pdata->data_lines;
        pr_info("omapfb: %s rev %02x LCD detected, %d data lines\n",
                        md->panel.name, md->revision, md->panel.data_lines);

        return 0;
}

static int mipid_spi_probe(struct spi_device *spi)
{
        struct mipid_device *md;
        int r;

        md = kzalloc(sizeof(*md), GFP_KERNEL);
        if (md == NULL) {
                dev_err(&spi->dev, "out of memory\n");
                return -ENOMEM;
        }

        spi->mode = SPI_MODE_0;
        md->spi = spi;
        dev_set_drvdata(&spi->dev, md);
        md->panel = mipid_panel;

        r = mipid_detect(md);
        if (r < 0)
                return r;

        omapfb_register_panel(&md->panel);

        return 0;
}

static int mipid_spi_remove(struct spi_device *spi)
{
        struct mipid_device *md = dev_get_drvdata(&spi->dev);

        mipid_disable(&md->panel);
        kfree(md);

        return 0;
}

static struct spi_driver mipid_spi_driver = {
        .driver = {
                .name   = MIPID_MODULE_NAME,
                .bus    = &spi_bus_type,
                .owner  = THIS_MODULE,
        },
        .probe  = mipid_spi_probe,
        .remove = __devexit_p(mipid_spi_remove),
};

static int __init mipid_drv_init(void)
{
        spi_register_driver(&mipid_spi_driver);

        return 0;
}
module_init(mipid_drv_init);

static void __exit mipid_drv_cleanup(void)
{
        spi_unregister_driver(&mipid_spi_driver);
}
module_exit(mipid_drv_cleanup);

MODULE_DESCRIPTION("MIPI display driver");
MODULE_LICENSE("GPL");