linux/include/linux/sockios.h
<<
>>
Prefs
   1/*
   2 * INET         An implementation of the TCP/IP protocol suite for the LINUX
   3 *              operating system.  INET is implemented using the  BSD Socket
   4 *              interface as the means of communication with the user level.
   5 *
   6 *              Definitions of the socket-level I/O control calls.
   7 *
   8 * Version:     @(#)sockios.h   1.0.2   03/09/93
   9 *
  10 * Authors:     Ross Biro
  11 *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
  12 *
  13 *              This program is free software; you can redistribute it and/or
  14 *              modify it under the terms of the GNU General Public License
  15 *              as published by the Free Software Foundation; either version
  16 *              2 of the License, or (at your option) any later version.
  17 */
  18#ifndef _LINUX_SOCKIOS_H
  19#define _LINUX_SOCKIOS_H
  20
  21#include <asm/sockios.h>
  22
  23/* Linux-specific socket ioctls */
  24#define SIOCINQ         FIONREAD
  25#define SIOCOUTQ        TIOCOUTQ        /* output queue size (not sent + not acked) */
  26
  27/* Routing table calls. */
  28#define SIOCADDRT       0x890B          /* add routing table entry      */
  29#define SIOCDELRT       0x890C          /* delete routing table entry   */
  30#define SIOCRTMSG       0x890D          /* call to routing system       */
  31
  32/* Socket configuration controls. */
  33#define SIOCGIFNAME     0x8910          /* get iface name               */
  34#define SIOCSIFLINK     0x8911          /* set iface channel            */
  35#define SIOCGIFCONF     0x8912          /* get iface list               */
  36#define SIOCGIFFLAGS    0x8913          /* get flags                    */
  37#define SIOCSIFFLAGS    0x8914          /* set flags                    */
  38#define SIOCGIFADDR     0x8915          /* get PA address               */
  39#define SIOCSIFADDR     0x8916          /* set PA address               */
  40#define SIOCGIFDSTADDR  0x8917          /* get remote PA address        */
  41#define SIOCSIFDSTADDR  0x8918          /* set remote PA address        */
  42#define SIOCGIFBRDADDR  0x8919          /* get broadcast PA address     */
  43#define SIOCSIFBRDADDR  0x891a          /* set broadcast PA address     */
  44#define SIOCGIFNETMASK  0x891b          /* get network PA mask          */
  45#define SIOCSIFNETMASK  0x891c          /* set network PA mask          */
  46#define SIOCGIFMETRIC   0x891d          /* get metric                   */
  47#define SIOCSIFMETRIC   0x891e          /* set metric                   */
  48#define SIOCGIFMEM      0x891f          /* get memory address (BSD)     */
  49#define SIOCSIFMEM      0x8920          /* set memory address (BSD)     */
  50#define SIOCGIFMTU      0x8921          /* get MTU size                 */
  51#define SIOCSIFMTU      0x8922          /* set MTU size                 */
  52#define SIOCSIFNAME     0x8923          /* set interface name */
  53#define SIOCSIFHWADDR   0x8924          /* set hardware address         */
  54#define SIOCGIFENCAP    0x8925          /* get/set encapsulations       */
  55#define SIOCSIFENCAP    0x8926          
  56#define SIOCGIFHWADDR   0x8927          /* Get hardware address         */
  57#define SIOCGIFSLAVE    0x8929          /* Driver slaving support       */
  58#define SIOCSIFSLAVE    0x8930
  59#define SIOCADDMULTI    0x8931          /* Multicast address lists      */
  60#define SIOCDELMULTI    0x8932
  61#define SIOCGIFINDEX    0x8933          /* name -> if_index mapping     */
  62#define SIOGIFINDEX     SIOCGIFINDEX    /* misprint compatibility :-)   */
  63#define SIOCSIFPFLAGS   0x8934          /* set/get extended flags set   */
  64#define SIOCGIFPFLAGS   0x8935
  65#define SIOCDIFADDR     0x8936          /* delete PA address            */
  66#define SIOCSIFHWBROADCAST      0x8937  /* set hardware broadcast addr  */
  67#define SIOCGIFCOUNT    0x8938          /* get number of devices */
  68
  69#define SIOCGIFBR       0x8940          /* Bridging support             */
  70#define SIOCSIFBR       0x8941          /* Set bridging options         */
  71
  72#define SIOCGIFTXQLEN   0x8942          /* Get the tx queue length      */
  73#define SIOCSIFTXQLEN   0x8943          /* Set the tx queue length      */
  74
  75/* SIOCGIFDIVERT was:   0x8944          Frame diversion support */
  76/* SIOCSIFDIVERT was:   0x8945          Set frame diversion options */
  77
  78#define SIOCETHTOOL     0x8946          /* Ethtool interface            */
  79
  80#define SIOCGMIIPHY     0x8947          /* Get address of MII PHY in use. */
  81#define SIOCGMIIREG     0x8948          /* Read MII PHY register.       */
  82#define SIOCSMIIREG     0x8949          /* Write MII PHY register.      */
  83
  84#define SIOCWANDEV      0x894A          /* get/set netdev parameters    */
  85
  86#define SIOCOUTQNSD     0x894B          /* output queue size (not sent only) */
  87
  88/* ARP cache control calls. */
  89                    /*  0x8950 - 0x8952  * obsolete calls, don't re-use */
  90#define SIOCDARP        0x8953          /* delete ARP table entry       */
  91#define SIOCGARP        0x8954          /* get ARP table entry          */
  92#define SIOCSARP        0x8955          /* set ARP table entry          */
  93
  94/* RARP cache control calls. */
  95#define SIOCDRARP       0x8960          /* delete RARP table entry      */
  96#define SIOCGRARP       0x8961          /* get RARP table entry         */
  97#define SIOCSRARP       0x8962          /* set RARP table entry         */
  98
  99/* Driver configuration calls */
 100
 101#define SIOCGIFMAP      0x8970          /* Get device parameters        */
 102#define SIOCSIFMAP      0x8971          /* Set device parameters        */
 103
 104/* DLCI configuration calls */
 105
 106#define SIOCADDDLCI     0x8980          /* Create new DLCI device       */
 107#define SIOCDELDLCI     0x8981          /* Delete DLCI device           */
 108
 109#define SIOCGIFVLAN     0x8982          /* 802.1Q VLAN support          */
 110#define SIOCSIFVLAN     0x8983          /* Set 802.1Q VLAN options      */
 111
 112/* bonding calls */
 113
 114#define SIOCBONDENSLAVE 0x8990          /* enslave a device to the bond */
 115#define SIOCBONDRELEASE 0x8991          /* release a slave from the bond*/
 116#define SIOCBONDSETHWADDR      0x8992   /* set the hw addr of the bond  */
 117#define SIOCBONDSLAVEINFOQUERY 0x8993   /* rtn info about slave state   */
 118#define SIOCBONDINFOQUERY      0x8994   /* rtn info about bond state    */
 119#define SIOCBONDCHANGEACTIVE   0x8995   /* update to a new active slave */
 120                        
 121/* bridge calls */
 122#define SIOCBRADDBR     0x89a0          /* create new bridge device     */
 123#define SIOCBRDELBR     0x89a1          /* remove bridge device         */
 124#define SIOCBRADDIF     0x89a2          /* add interface to bridge      */
 125#define SIOCBRDELIF     0x89a3          /* remove interface from bridge */
 126
 127/* hardware time stamping: parameters in linux/net_tstamp.h */
 128#define SIOCSHWTSTAMP   0x89b0
 129
 130/* Device private ioctl calls */
 131
 132/*
 133 *      These 16 ioctls are available to devices via the do_ioctl() device
 134 *      vector. Each device should include this file and redefine these names
 135 *      as their own. Because these are device dependent it is a good idea
 136 *      _NOT_ to issue them to random objects and hope.
 137 *
 138 *      THESE IOCTLS ARE _DEPRECATED_ AND WILL DISAPPEAR IN 2.5.X -DaveM
 139 */
 140 
 141#define SIOCDEVPRIVATE  0x89F0  /* to 89FF */
 142
 143/*
 144 *      These 16 ioctl calls are protocol private
 145 */
 146 
 147#define SIOCPROTOPRIVATE 0x89E0 /* to 89EF */
 148#endif  /* _LINUX_SOCKIOS_H */
 149