linux/arch/arm/mach-at91/at91sam9263_devices.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-at91/at91sam9263_devices.c
   3 *
   4 *  Copyright (C) 2007 Atmel Corporation.
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 */
  12#include <asm/mach/arch.h>
  13#include <asm/mach/map.h>
  14
  15#include <linux/dma-mapping.h>
  16#include <linux/platform_device.h>
  17#include <linux/i2c-gpio.h>
  18
  19#include <linux/fb.h>
  20#include <video/atmel_lcdc.h>
  21
  22#include <mach/board.h>
  23#include <mach/gpio.h>
  24#include <mach/at91sam9263.h>
  25#include <mach/at91sam9263_matrix.h>
  26#include <mach/at91sam9_smc.h>
  27
  28#include "generic.h"
  29
  30
  31/* --------------------------------------------------------------------
  32 *  USB Host
  33 * -------------------------------------------------------------------- */
  34
  35#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  36static u64 ohci_dmamask = DMA_BIT_MASK(32);
  37static struct at91_usbh_data usbh_data;
  38
  39static struct resource usbh_resources[] = {
  40        [0] = {
  41                .start  = AT91SAM9263_UHP_BASE,
  42                .end    = AT91SAM9263_UHP_BASE + SZ_1M - 1,
  43                .flags  = IORESOURCE_MEM,
  44        },
  45        [1] = {
  46                .start  = AT91SAM9263_ID_UHP,
  47                .end    = AT91SAM9263_ID_UHP,
  48                .flags  = IORESOURCE_IRQ,
  49        },
  50};
  51
  52static struct platform_device at91_usbh_device = {
  53        .name           = "at91_ohci",
  54        .id             = -1,
  55        .dev            = {
  56                                .dma_mask               = &ohci_dmamask,
  57                                .coherent_dma_mask      = DMA_BIT_MASK(32),
  58                                .platform_data          = &usbh_data,
  59        },
  60        .resource       = usbh_resources,
  61        .num_resources  = ARRAY_SIZE(usbh_resources),
  62};
  63
  64void __init at91_add_device_usbh(struct at91_usbh_data *data)
  65{
  66        int i;
  67
  68        if (!data)
  69                return;
  70
  71        /* Enable VBus control for UHP ports */
  72        for (i = 0; i < data->ports; i++) {
  73                if (data->vbus_pin[i])
  74                        at91_set_gpio_output(data->vbus_pin[i], 0);
  75        }
  76
  77        usbh_data = *data;
  78        platform_device_register(&at91_usbh_device);
  79}
  80#else
  81void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  82#endif
  83
  84
  85/* --------------------------------------------------------------------
  86 *  USB Device (Gadget)
  87 * -------------------------------------------------------------------- */
  88
  89#ifdef CONFIG_USB_GADGET_AT91
  90static struct at91_udc_data udc_data;
  91
  92static struct resource udc_resources[] = {
  93        [0] = {
  94                .start  = AT91SAM9263_BASE_UDP,
  95                .end    = AT91SAM9263_BASE_UDP + SZ_16K - 1,
  96                .flags  = IORESOURCE_MEM,
  97        },
  98        [1] = {
  99                .start  = AT91SAM9263_ID_UDP,
 100                .end    = AT91SAM9263_ID_UDP,
 101                .flags  = IORESOURCE_IRQ,
 102        },
 103};
 104
 105static struct platform_device at91_udc_device = {
 106        .name           = "at91_udc",
 107        .id             = -1,
 108        .dev            = {
 109                                .platform_data          = &udc_data,
 110        },
 111        .resource       = udc_resources,
 112        .num_resources  = ARRAY_SIZE(udc_resources),
 113};
 114
 115void __init at91_add_device_udc(struct at91_udc_data *data)
 116{
 117        if (!data)
 118                return;
 119
 120        if (data->vbus_pin) {
 121                at91_set_gpio_input(data->vbus_pin, 0);
 122                at91_set_deglitch(data->vbus_pin, 1);
 123        }
 124
 125        /* Pullup pin is handled internally by USB device peripheral */
 126
 127        udc_data = *data;
 128        platform_device_register(&at91_udc_device);
 129}
 130#else
 131void __init at91_add_device_udc(struct at91_udc_data *data) {}
 132#endif
 133
 134
 135/* --------------------------------------------------------------------
 136 *  Ethernet
 137 * -------------------------------------------------------------------- */
 138
 139#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 140static u64 eth_dmamask = DMA_BIT_MASK(32);
 141static struct at91_eth_data eth_data;
 142
 143static struct resource eth_resources[] = {
 144        [0] = {
 145                .start  = AT91SAM9263_BASE_EMAC,
 146                .end    = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
 147                .flags  = IORESOURCE_MEM,
 148        },
 149        [1] = {
 150                .start  = AT91SAM9263_ID_EMAC,
 151                .end    = AT91SAM9263_ID_EMAC,
 152                .flags  = IORESOURCE_IRQ,
 153        },
 154};
 155
 156static struct platform_device at91sam9263_eth_device = {
 157        .name           = "macb",
 158        .id             = -1,
 159        .dev            = {
 160                                .dma_mask               = &eth_dmamask,
 161                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 162                                .platform_data          = &eth_data,
 163        },
 164        .resource       = eth_resources,
 165        .num_resources  = ARRAY_SIZE(eth_resources),
 166};
 167
 168void __init at91_add_device_eth(struct at91_eth_data *data)
 169{
 170        if (!data)
 171                return;
 172
 173        if (data->phy_irq_pin) {
 174                at91_set_gpio_input(data->phy_irq_pin, 0);
 175                at91_set_deglitch(data->phy_irq_pin, 1);
 176        }
 177
 178        /* Pins used for MII and RMII */
 179        at91_set_A_periph(AT91_PIN_PE21, 0);    /* ETXCK_EREFCK */
 180        at91_set_B_periph(AT91_PIN_PC25, 0);    /* ERXDV */
 181        at91_set_A_periph(AT91_PIN_PE25, 0);    /* ERX0 */
 182        at91_set_A_periph(AT91_PIN_PE26, 0);    /* ERX1 */
 183        at91_set_A_periph(AT91_PIN_PE27, 0);    /* ERXER */
 184        at91_set_A_periph(AT91_PIN_PE28, 0);    /* ETXEN */
 185        at91_set_A_periph(AT91_PIN_PE23, 0);    /* ETX0 */
 186        at91_set_A_periph(AT91_PIN_PE24, 0);    /* ETX1 */
 187        at91_set_A_periph(AT91_PIN_PE30, 0);    /* EMDIO */
 188        at91_set_A_periph(AT91_PIN_PE29, 0);    /* EMDC */
 189
 190        if (!data->is_rmii) {
 191                at91_set_A_periph(AT91_PIN_PE22, 0);    /* ECRS */
 192                at91_set_B_periph(AT91_PIN_PC26, 0);    /* ECOL */
 193                at91_set_B_periph(AT91_PIN_PC22, 0);    /* ERX2 */
 194                at91_set_B_periph(AT91_PIN_PC23, 0);    /* ERX3 */
 195                at91_set_B_periph(AT91_PIN_PC27, 0);    /* ERXCK */
 196                at91_set_B_periph(AT91_PIN_PC20, 0);    /* ETX2 */
 197                at91_set_B_periph(AT91_PIN_PC21, 0);    /* ETX3 */
 198                at91_set_B_periph(AT91_PIN_PC24, 0);    /* ETXER */
 199        }
 200
 201        eth_data = *data;
 202        platform_device_register(&at91sam9263_eth_device);
 203}
 204#else
 205void __init at91_add_device_eth(struct at91_eth_data *data) {}
 206#endif
 207
 208
 209/* --------------------------------------------------------------------
 210 *  MMC / SD
 211 * -------------------------------------------------------------------- */
 212
 213#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 214static u64 mmc_dmamask = DMA_BIT_MASK(32);
 215static struct at91_mmc_data mmc0_data, mmc1_data;
 216
 217static struct resource mmc0_resources[] = {
 218        [0] = {
 219                .start  = AT91SAM9263_BASE_MCI0,
 220                .end    = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
 221                .flags  = IORESOURCE_MEM,
 222        },
 223        [1] = {
 224                .start  = AT91SAM9263_ID_MCI0,
 225                .end    = AT91SAM9263_ID_MCI0,
 226                .flags  = IORESOURCE_IRQ,
 227        },
 228};
 229
 230static struct platform_device at91sam9263_mmc0_device = {
 231        .name           = "at91_mci",
 232        .id             = 0,
 233        .dev            = {
 234                                .dma_mask               = &mmc_dmamask,
 235                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 236                                .platform_data          = &mmc0_data,
 237        },
 238        .resource       = mmc0_resources,
 239        .num_resources  = ARRAY_SIZE(mmc0_resources),
 240};
 241
 242static struct resource mmc1_resources[] = {
 243        [0] = {
 244                .start  = AT91SAM9263_BASE_MCI1,
 245                .end    = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
 246                .flags  = IORESOURCE_MEM,
 247        },
 248        [1] = {
 249                .start  = AT91SAM9263_ID_MCI1,
 250                .end    = AT91SAM9263_ID_MCI1,
 251                .flags  = IORESOURCE_IRQ,
 252        },
 253};
 254
 255static struct platform_device at91sam9263_mmc1_device = {
 256        .name           = "at91_mci",
 257        .id             = 1,
 258        .dev            = {
 259                                .dma_mask               = &mmc_dmamask,
 260                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 261                                .platform_data          = &mmc1_data,
 262        },
 263        .resource       = mmc1_resources,
 264        .num_resources  = ARRAY_SIZE(mmc1_resources),
 265};
 266
 267void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 268{
 269        if (!data)
 270                return;
 271
 272        /* input/irq */
 273        if (data->det_pin) {
 274                at91_set_gpio_input(data->det_pin, 1);
 275                at91_set_deglitch(data->det_pin, 1);
 276        }
 277        if (data->wp_pin)
 278                at91_set_gpio_input(data->wp_pin, 1);
 279        if (data->vcc_pin)
 280                at91_set_gpio_output(data->vcc_pin, 0);
 281
 282        if (mmc_id == 0) {              /* MCI0 */
 283                /* CLK */
 284                at91_set_A_periph(AT91_PIN_PA12, 0);
 285
 286                if (data->slot_b) {
 287                        /* CMD */
 288                        at91_set_A_periph(AT91_PIN_PA16, 1);
 289
 290                        /* DAT0, maybe DAT1..DAT3 */
 291                        at91_set_A_periph(AT91_PIN_PA17, 1);
 292                        if (data->wire4) {
 293                                at91_set_A_periph(AT91_PIN_PA18, 1);
 294                                at91_set_A_periph(AT91_PIN_PA19, 1);
 295                                at91_set_A_periph(AT91_PIN_PA20, 1);
 296                        }
 297                } else {
 298                        /* CMD */
 299                        at91_set_A_periph(AT91_PIN_PA1, 1);
 300
 301                        /* DAT0, maybe DAT1..DAT3 */
 302                        at91_set_A_periph(AT91_PIN_PA0, 1);
 303                        if (data->wire4) {
 304                                at91_set_A_periph(AT91_PIN_PA3, 1);
 305                                at91_set_A_periph(AT91_PIN_PA4, 1);
 306                                at91_set_A_periph(AT91_PIN_PA5, 1);
 307                        }
 308                }
 309
 310                mmc0_data = *data;
 311                platform_device_register(&at91sam9263_mmc0_device);
 312        } else {                        /* MCI1 */
 313                /* CLK */
 314                at91_set_A_periph(AT91_PIN_PA6, 0);
 315
 316                if (data->slot_b) {
 317                        /* CMD */
 318                        at91_set_A_periph(AT91_PIN_PA21, 1);
 319
 320                        /* DAT0, maybe DAT1..DAT3 */
 321                        at91_set_A_periph(AT91_PIN_PA22, 1);
 322                        if (data->wire4) {
 323                                at91_set_A_periph(AT91_PIN_PA23, 1);
 324                                at91_set_A_periph(AT91_PIN_PA24, 1);
 325                                at91_set_A_periph(AT91_PIN_PA25, 1);
 326                        }
 327                } else {
 328                        /* CMD */
 329                        at91_set_A_periph(AT91_PIN_PA7, 1);
 330
 331                        /* DAT0, maybe DAT1..DAT3 */
 332                        at91_set_A_periph(AT91_PIN_PA8, 1);
 333                        if (data->wire4) {
 334                                at91_set_A_periph(AT91_PIN_PA9, 1);
 335                                at91_set_A_periph(AT91_PIN_PA10, 1);
 336                                at91_set_A_periph(AT91_PIN_PA11, 1);
 337                        }
 338                }
 339
 340                mmc1_data = *data;
 341                platform_device_register(&at91sam9263_mmc1_device);
 342        }
 343}
 344#else
 345void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 346#endif
 347
 348/* --------------------------------------------------------------------
 349 *  Compact Flash (PCMCIA or IDE)
 350 * -------------------------------------------------------------------- */
 351
 352#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
 353    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
 354
 355static struct at91_cf_data cf0_data;
 356
 357static struct resource cf0_resources[] = {
 358        [0] = {
 359                .start  = AT91_CHIPSELECT_4,
 360                .end    = AT91_CHIPSELECT_4 + SZ_256M - 1,
 361                .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 362        }
 363};
 364
 365static struct platform_device cf0_device = {
 366        .id             = 0,
 367        .dev            = {
 368                                .platform_data  = &cf0_data,
 369        },
 370        .resource       = cf0_resources,
 371        .num_resources  = ARRAY_SIZE(cf0_resources),
 372};
 373
 374static struct at91_cf_data cf1_data;
 375
 376static struct resource cf1_resources[] = {
 377        [0] = {
 378                .start  = AT91_CHIPSELECT_5,
 379                .end    = AT91_CHIPSELECT_5 + SZ_256M - 1,
 380                .flags  = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
 381        }
 382};
 383
 384static struct platform_device cf1_device = {
 385        .id             = 1,
 386        .dev            = {
 387                                .platform_data  = &cf1_data,
 388        },
 389        .resource       = cf1_resources,
 390        .num_resources  = ARRAY_SIZE(cf1_resources),
 391};
 392
 393void __init at91_add_device_cf(struct at91_cf_data *data)
 394{
 395        unsigned long ebi0_csa;
 396        struct platform_device *pdev;
 397
 398        if (!data)
 399                return;
 400
 401        /*
 402         * assign CS4 or CS5 to SMC with Compact Flash logic support,
 403         * we assume SMC timings are configured by board code,
 404         * except True IDE where timings are controlled by driver
 405         */
 406        ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
 407        switch (data->chipselect) {
 408        case 4:
 409                at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
 410                ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
 411                cf0_data = *data;
 412                pdev = &cf0_device;
 413                break;
 414        case 5:
 415                at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
 416                ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
 417                cf1_data = *data;
 418                pdev = &cf1_device;
 419                break;
 420        default:
 421                printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
 422                       data->chipselect);
 423                return;
 424        }
 425        at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
 426
 427        if (data->det_pin) {
 428                at91_set_gpio_input(data->det_pin, 1);
 429                at91_set_deglitch(data->det_pin, 1);
 430        }
 431
 432        if (data->irq_pin) {
 433                at91_set_gpio_input(data->irq_pin, 1);
 434                at91_set_deglitch(data->irq_pin, 1);
 435        }
 436
 437        if (data->vcc_pin)
 438                /* initially off */
 439                at91_set_gpio_output(data->vcc_pin, 0);
 440
 441        /* enable EBI controlled pins */
 442        at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
 443        at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
 444        at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
 445        at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
 446
 447        pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
 448        platform_device_register(pdev);
 449}
 450#else
 451void __init at91_add_device_cf(struct at91_cf_data *data) {}
 452#endif
 453
 454/* --------------------------------------------------------------------
 455 *  NAND / SmartMedia
 456 * -------------------------------------------------------------------- */
 457
 458#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 459static struct atmel_nand_data nand_data;
 460
 461#define NAND_BASE       AT91_CHIPSELECT_3
 462
 463static struct resource nand_resources[] = {
 464        [0] = {
 465                .start  = NAND_BASE,
 466                .end    = NAND_BASE + SZ_256M - 1,
 467                .flags  = IORESOURCE_MEM,
 468        },
 469        [1] = {
 470                .start  = AT91_BASE_SYS + AT91_ECC0,
 471                .end    = AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
 472                .flags  = IORESOURCE_MEM,
 473        }
 474};
 475
 476static struct platform_device at91sam9263_nand_device = {
 477        .name           = "atmel_nand",
 478        .id             = -1,
 479        .dev            = {
 480                                .platform_data  = &nand_data,
 481        },
 482        .resource       = nand_resources,
 483        .num_resources  = ARRAY_SIZE(nand_resources),
 484};
 485
 486void __init at91_add_device_nand(struct atmel_nand_data *data)
 487{
 488        unsigned long csa;
 489
 490        if (!data)
 491                return;
 492
 493        csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
 494        at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 495
 496        /* enable pin */
 497        if (data->enable_pin)
 498                at91_set_gpio_output(data->enable_pin, 1);
 499
 500        /* ready/busy pin */
 501        if (data->rdy_pin)
 502                at91_set_gpio_input(data->rdy_pin, 1);
 503
 504        /* card detect pin */
 505        if (data->det_pin)
 506                at91_set_gpio_input(data->det_pin, 1);
 507
 508        nand_data = *data;
 509        platform_device_register(&at91sam9263_nand_device);
 510}
 511#else
 512void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 513#endif
 514
 515
 516/* --------------------------------------------------------------------
 517 *  TWI (i2c)
 518 * -------------------------------------------------------------------- */
 519
 520/*
 521 * Prefer the GPIO code since the TWI controller isn't robust
 522 * (gets overruns and underruns under load) and can only issue
 523 * repeated STARTs in one scenario (the driver doesn't yet handle them).
 524 */
 525#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 526
 527static struct i2c_gpio_platform_data pdata = {
 528        .sda_pin                = AT91_PIN_PB4,
 529        .sda_is_open_drain      = 1,
 530        .scl_pin                = AT91_PIN_PB5,
 531        .scl_is_open_drain      = 1,
 532        .udelay                 = 2,            /* ~100 kHz */
 533};
 534
 535static struct platform_device at91sam9263_twi_device = {
 536        .name                   = "i2c-gpio",
 537        .id                     = -1,
 538        .dev.platform_data      = &pdata,
 539};
 540
 541void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 542{
 543        at91_set_GPIO_periph(AT91_PIN_PB4, 1);          /* TWD (SDA) */
 544        at91_set_multi_drive(AT91_PIN_PB4, 1);
 545
 546        at91_set_GPIO_periph(AT91_PIN_PB5, 1);          /* TWCK (SCL) */
 547        at91_set_multi_drive(AT91_PIN_PB5, 1);
 548
 549        i2c_register_board_info(0, devices, nr_devices);
 550        platform_device_register(&at91sam9263_twi_device);
 551}
 552
 553#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 554
 555static struct resource twi_resources[] = {
 556        [0] = {
 557                .start  = AT91SAM9263_BASE_TWI,
 558                .end    = AT91SAM9263_BASE_TWI + SZ_16K - 1,
 559                .flags  = IORESOURCE_MEM,
 560        },
 561        [1] = {
 562                .start  = AT91SAM9263_ID_TWI,
 563                .end    = AT91SAM9263_ID_TWI,
 564                .flags  = IORESOURCE_IRQ,
 565        },
 566};
 567
 568static struct platform_device at91sam9263_twi_device = {
 569        .name           = "at91_i2c",
 570        .id             = -1,
 571        .resource       = twi_resources,
 572        .num_resources  = ARRAY_SIZE(twi_resources),
 573};
 574
 575void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 576{
 577        /* pins used for TWI interface */
 578        at91_set_A_periph(AT91_PIN_PB4, 0);             /* TWD */
 579        at91_set_multi_drive(AT91_PIN_PB4, 1);
 580
 581        at91_set_A_periph(AT91_PIN_PB5, 0);             /* TWCK */
 582        at91_set_multi_drive(AT91_PIN_PB5, 1);
 583
 584        i2c_register_board_info(0, devices, nr_devices);
 585        platform_device_register(&at91sam9263_twi_device);
 586}
 587#else
 588void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 589#endif
 590
 591
 592/* --------------------------------------------------------------------
 593 *  SPI
 594 * -------------------------------------------------------------------- */
 595
 596#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 597static u64 spi_dmamask = DMA_BIT_MASK(32);
 598
 599static struct resource spi0_resources[] = {
 600        [0] = {
 601                .start  = AT91SAM9263_BASE_SPI0,
 602                .end    = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
 603                .flags  = IORESOURCE_MEM,
 604        },
 605        [1] = {
 606                .start  = AT91SAM9263_ID_SPI0,
 607                .end    = AT91SAM9263_ID_SPI0,
 608                .flags  = IORESOURCE_IRQ,
 609        },
 610};
 611
 612static struct platform_device at91sam9263_spi0_device = {
 613        .name           = "atmel_spi",
 614        .id             = 0,
 615        .dev            = {
 616                                .dma_mask               = &spi_dmamask,
 617                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 618        },
 619        .resource       = spi0_resources,
 620        .num_resources  = ARRAY_SIZE(spi0_resources),
 621};
 622
 623static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
 624
 625static struct resource spi1_resources[] = {
 626        [0] = {
 627                .start  = AT91SAM9263_BASE_SPI1,
 628                .end    = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
 629                .flags  = IORESOURCE_MEM,
 630        },
 631        [1] = {
 632                .start  = AT91SAM9263_ID_SPI1,
 633                .end    = AT91SAM9263_ID_SPI1,
 634                .flags  = IORESOURCE_IRQ,
 635        },
 636};
 637
 638static struct platform_device at91sam9263_spi1_device = {
 639        .name           = "atmel_spi",
 640        .id             = 1,
 641        .dev            = {
 642                                .dma_mask               = &spi_dmamask,
 643                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 644        },
 645        .resource       = spi1_resources,
 646        .num_resources  = ARRAY_SIZE(spi1_resources),
 647};
 648
 649static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
 650
 651void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 652{
 653        int i;
 654        unsigned long cs_pin;
 655        short enable_spi0 = 0;
 656        short enable_spi1 = 0;
 657
 658        /* Choose SPI chip-selects */
 659        for (i = 0; i < nr_devices; i++) {
 660                if (devices[i].controller_data)
 661                        cs_pin = (unsigned long) devices[i].controller_data;
 662                else if (devices[i].bus_num == 0)
 663                        cs_pin = spi0_standard_cs[devices[i].chip_select];
 664                else
 665                        cs_pin = spi1_standard_cs[devices[i].chip_select];
 666
 667                if (devices[i].bus_num == 0)
 668                        enable_spi0 = 1;
 669                else
 670                        enable_spi1 = 1;
 671
 672                /* enable chip-select pin */
 673                at91_set_gpio_output(cs_pin, 1);
 674
 675                /* pass chip-select pin to driver */
 676                devices[i].controller_data = (void *) cs_pin;
 677        }
 678
 679        spi_register_board_info(devices, nr_devices);
 680
 681        /* Configure SPI bus(es) */
 682        if (enable_spi0) {
 683                at91_set_B_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
 684                at91_set_B_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
 685                at91_set_B_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */
 686
 687                platform_device_register(&at91sam9263_spi0_device);
 688        }
 689        if (enable_spi1) {
 690                at91_set_A_periph(AT91_PIN_PB12, 0);    /* SPI1_MISO */
 691                at91_set_A_periph(AT91_PIN_PB13, 0);    /* SPI1_MOSI */
 692                at91_set_A_periph(AT91_PIN_PB14, 0);    /* SPI1_SPCK */
 693
 694                platform_device_register(&at91sam9263_spi1_device);
 695        }
 696}
 697#else
 698void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 699#endif
 700
 701
 702/* --------------------------------------------------------------------
 703 *  AC97
 704 * -------------------------------------------------------------------- */
 705
 706#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 707static u64 ac97_dmamask = DMA_BIT_MASK(32);
 708static struct ac97c_platform_data ac97_data;
 709
 710static struct resource ac97_resources[] = {
 711        [0] = {
 712                .start  = AT91SAM9263_BASE_AC97C,
 713                .end    = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
 714                .flags  = IORESOURCE_MEM,
 715        },
 716        [1] = {
 717                .start  = AT91SAM9263_ID_AC97C,
 718                .end    = AT91SAM9263_ID_AC97C,
 719                .flags  = IORESOURCE_IRQ,
 720        },
 721};
 722
 723static struct platform_device at91sam9263_ac97_device = {
 724        .name           = "atmel_ac97c",
 725        .id             = 0,
 726        .dev            = {
 727                                .dma_mask               = &ac97_dmamask,
 728                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 729                                .platform_data          = &ac97_data,
 730        },
 731        .resource       = ac97_resources,
 732        .num_resources  = ARRAY_SIZE(ac97_resources),
 733};
 734
 735void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 736{
 737        if (!data)
 738                return;
 739
 740        at91_set_A_periph(AT91_PIN_PB0, 0);     /* AC97FS */
 741        at91_set_A_periph(AT91_PIN_PB1, 0);     /* AC97CK */
 742        at91_set_A_periph(AT91_PIN_PB2, 0);     /* AC97TX */
 743        at91_set_A_periph(AT91_PIN_PB3, 0);     /* AC97RX */
 744
 745        /* reset */
 746        if (data->reset_pin)
 747                at91_set_gpio_output(data->reset_pin, 0);
 748
 749        ac97_data = *data;
 750        platform_device_register(&at91sam9263_ac97_device);
 751}
 752#else
 753void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 754#endif
 755
 756/* --------------------------------------------------------------------
 757 *  CAN Controller
 758 * -------------------------------------------------------------------- */
 759
 760#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
 761static struct resource can_resources[] = {
 762        [0] = {
 763                .start  = AT91SAM9263_BASE_CAN,
 764                .end    = AT91SAM9263_BASE_CAN + SZ_16K - 1,
 765                .flags  = IORESOURCE_MEM,
 766        },
 767        [1] = {
 768                .start  = AT91SAM9263_ID_CAN,
 769                .end    = AT91SAM9263_ID_CAN,
 770                .flags  = IORESOURCE_IRQ,
 771        },
 772};
 773
 774static struct platform_device at91sam9263_can_device = {
 775        .name           = "at91_can",
 776        .id             = -1,
 777        .resource       = can_resources,
 778        .num_resources  = ARRAY_SIZE(can_resources),
 779};
 780
 781void __init at91_add_device_can(struct at91_can_data *data)
 782{
 783        at91_set_A_periph(AT91_PIN_PA13, 0);    /* CANTX */
 784        at91_set_A_periph(AT91_PIN_PA14, 0);    /* CANRX */
 785        at91sam9263_can_device.dev.platform_data = data;
 786
 787        platform_device_register(&at91sam9263_can_device);
 788}
 789#else
 790void __init at91_add_device_can(struct at91_can_data *data) {}
 791#endif
 792
 793/* --------------------------------------------------------------------
 794 *  LCD Controller
 795 * -------------------------------------------------------------------- */
 796
 797#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 798static u64 lcdc_dmamask = DMA_BIT_MASK(32);
 799static struct atmel_lcdfb_info lcdc_data;
 800
 801static struct resource lcdc_resources[] = {
 802        [0] = {
 803                .start  = AT91SAM9263_LCDC_BASE,
 804                .end    = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
 805                .flags  = IORESOURCE_MEM,
 806        },
 807        [1] = {
 808                .start  = AT91SAM9263_ID_LCDC,
 809                .end    = AT91SAM9263_ID_LCDC,
 810                .flags  = IORESOURCE_IRQ,
 811        },
 812};
 813
 814static struct platform_device at91_lcdc_device = {
 815        .name           = "atmel_lcdfb",
 816        .id             = 0,
 817        .dev            = {
 818                                .dma_mask               = &lcdc_dmamask,
 819                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 820                                .platform_data          = &lcdc_data,
 821        },
 822        .resource       = lcdc_resources,
 823        .num_resources  = ARRAY_SIZE(lcdc_resources),
 824};
 825
 826void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 827{
 828        if (!data)
 829                return;
 830
 831        at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
 832        at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
 833        at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */
 834        at91_set_B_periph(AT91_PIN_PB9, 0);     /* LCDCC */
 835        at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDD2 */
 836        at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDD3 */
 837        at91_set_A_periph(AT91_PIN_PC8, 0);     /* LCDD4 */
 838        at91_set_A_periph(AT91_PIN_PC9, 0);     /* LCDD5 */
 839        at91_set_A_periph(AT91_PIN_PC10, 0);    /* LCDD6 */
 840        at91_set_A_periph(AT91_PIN_PC11, 0);    /* LCDD7 */
 841        at91_set_A_periph(AT91_PIN_PC14, 0);    /* LCDD10 */
 842        at91_set_A_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
 843        at91_set_A_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
 844        at91_set_B_periph(AT91_PIN_PC12, 0);    /* LCDD13 */
 845        at91_set_A_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
 846        at91_set_A_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
 847        at91_set_A_periph(AT91_PIN_PC22, 0);    /* LCDD18 */
 848        at91_set_A_periph(AT91_PIN_PC23, 0);    /* LCDD19 */
 849        at91_set_A_periph(AT91_PIN_PC24, 0);    /* LCDD20 */
 850        at91_set_B_periph(AT91_PIN_PC17, 0);    /* LCDD21 */
 851        at91_set_A_periph(AT91_PIN_PC26, 0);    /* LCDD22 */
 852        at91_set_A_periph(AT91_PIN_PC27, 0);    /* LCDD23 */
 853
 854        lcdc_data = *data;
 855        platform_device_register(&at91_lcdc_device);
 856}
 857#else
 858void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 859#endif
 860
 861
 862/* --------------------------------------------------------------------
 863 *  Image Sensor Interface
 864 * -------------------------------------------------------------------- */
 865
 866#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
 867
 868struct resource isi_resources[] = {
 869        [0] = {
 870                .start  = AT91SAM9263_BASE_ISI,
 871                .end    = AT91SAM9263_BASE_ISI + SZ_16K - 1,
 872                .flags  = IORESOURCE_MEM,
 873        },
 874        [1] = {
 875                .start  = AT91SAM9263_ID_ISI,
 876                .end    = AT91SAM9263_ID_ISI,
 877                .flags  = IORESOURCE_IRQ,
 878        },
 879};
 880
 881static struct platform_device at91sam9263_isi_device = {
 882        .name           = "at91_isi",
 883        .id             = -1,
 884        .resource       = isi_resources,
 885        .num_resources  = ARRAY_SIZE(isi_resources),
 886};
 887
 888void __init at91_add_device_isi(void)
 889{
 890        at91_set_A_periph(AT91_PIN_PE0, 0);     /* ISI_D0 */
 891        at91_set_A_periph(AT91_PIN_PE1, 0);     /* ISI_D1 */
 892        at91_set_A_periph(AT91_PIN_PE2, 0);     /* ISI_D2 */
 893        at91_set_A_periph(AT91_PIN_PE3, 0);     /* ISI_D3 */
 894        at91_set_A_periph(AT91_PIN_PE4, 0);     /* ISI_D4 */
 895        at91_set_A_periph(AT91_PIN_PE5, 0);     /* ISI_D5 */
 896        at91_set_A_periph(AT91_PIN_PE6, 0);     /* ISI_D6 */
 897        at91_set_A_periph(AT91_PIN_PE7, 0);     /* ISI_D7 */
 898        at91_set_A_periph(AT91_PIN_PE8, 0);     /* ISI_PCK */
 899        at91_set_A_periph(AT91_PIN_PE9, 0);     /* ISI_HSYNC */
 900        at91_set_A_periph(AT91_PIN_PE10, 0);    /* ISI_VSYNC */
 901        at91_set_B_periph(AT91_PIN_PE11, 0);    /* ISI_MCK (PCK3) */
 902        at91_set_B_periph(AT91_PIN_PE12, 0);    /* ISI_PD8 */
 903        at91_set_B_periph(AT91_PIN_PE13, 0);    /* ISI_PD9 */
 904        at91_set_B_periph(AT91_PIN_PE14, 0);    /* ISI_PD10 */
 905        at91_set_B_periph(AT91_PIN_PE15, 0);    /* ISI_PD11 */
 906}
 907#else
 908void __init at91_add_device_isi(void) {}
 909#endif
 910
 911
 912/* --------------------------------------------------------------------
 913 *  Timer/Counter block
 914 * -------------------------------------------------------------------- */
 915
 916#ifdef CONFIG_ATMEL_TCLIB
 917
 918static struct resource tcb_resources[] = {
 919        [0] = {
 920                .start  = AT91SAM9263_BASE_TCB0,
 921                .end    = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
 922                .flags  = IORESOURCE_MEM,
 923        },
 924        [1] = {
 925                .start  = AT91SAM9263_ID_TCB,
 926                .end    = AT91SAM9263_ID_TCB,
 927                .flags  = IORESOURCE_IRQ,
 928        },
 929};
 930
 931static struct platform_device at91sam9263_tcb_device = {
 932        .name           = "atmel_tcb",
 933        .id             = 0,
 934        .resource       = tcb_resources,
 935        .num_resources  = ARRAY_SIZE(tcb_resources),
 936};
 937
 938static void __init at91_add_device_tc(void)
 939{
 940        platform_device_register(&at91sam9263_tcb_device);
 941}
 942#else
 943static void __init at91_add_device_tc(void) { }
 944#endif
 945
 946
 947/* --------------------------------------------------------------------
 948 *  RTT
 949 * -------------------------------------------------------------------- */
 950
 951static struct resource rtt0_resources[] = {
 952        {
 953                .start  = AT91_BASE_SYS + AT91_RTT0,
 954                .end    = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
 955                .flags  = IORESOURCE_MEM,
 956        }
 957};
 958
 959static struct platform_device at91sam9263_rtt0_device = {
 960        .name           = "at91_rtt",
 961        .id             = 0,
 962        .resource       = rtt0_resources,
 963        .num_resources  = ARRAY_SIZE(rtt0_resources),
 964};
 965
 966static struct resource rtt1_resources[] = {
 967        {
 968                .start  = AT91_BASE_SYS + AT91_RTT1,
 969                .end    = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
 970                .flags  = IORESOURCE_MEM,
 971        }
 972};
 973
 974static struct platform_device at91sam9263_rtt1_device = {
 975        .name           = "at91_rtt",
 976        .id             = 1,
 977        .resource       = rtt1_resources,
 978        .num_resources  = ARRAY_SIZE(rtt1_resources),
 979};
 980
 981static void __init at91_add_device_rtt(void)
 982{
 983        platform_device_register(&at91sam9263_rtt0_device);
 984        platform_device_register(&at91sam9263_rtt1_device);
 985}
 986
 987
 988/* --------------------------------------------------------------------
 989 *  Watchdog
 990 * -------------------------------------------------------------------- */
 991
 992#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 993static struct platform_device at91sam9263_wdt_device = {
 994        .name           = "at91_wdt",
 995        .id             = -1,
 996        .num_resources  = 0,
 997};
 998
 999static void __init at91_add_device_watchdog(void)
1000{
1001        platform_device_register(&at91sam9263_wdt_device);
1002}
1003#else
1004static void __init at91_add_device_watchdog(void) {}
1005#endif
1006
1007
1008/* --------------------------------------------------------------------
1009 *  PWM
1010 * --------------------------------------------------------------------*/
1011
1012#if defined(CONFIG_ATMEL_PWM)
1013static u32 pwm_mask;
1014
1015static struct resource pwm_resources[] = {
1016        [0] = {
1017                .start  = AT91SAM9263_BASE_PWMC,
1018                .end    = AT91SAM9263_BASE_PWMC + SZ_16K - 1,
1019                .flags  = IORESOURCE_MEM,
1020        },
1021        [1] = {
1022                .start  = AT91SAM9263_ID_PWMC,
1023                .end    = AT91SAM9263_ID_PWMC,
1024                .flags  = IORESOURCE_IRQ,
1025        },
1026};
1027
1028static struct platform_device at91sam9263_pwm0_device = {
1029        .name   = "atmel_pwm",
1030        .id     = -1,
1031        .dev    = {
1032                .platform_data          = &pwm_mask,
1033        },
1034        .resource       = pwm_resources,
1035        .num_resources  = ARRAY_SIZE(pwm_resources),
1036};
1037
1038void __init at91_add_device_pwm(u32 mask)
1039{
1040        if (mask & (1 << AT91_PWM0))
1041                at91_set_B_periph(AT91_PIN_PB7, 1);     /* enable PWM0 */
1042
1043        if (mask & (1 << AT91_PWM1))
1044                at91_set_B_periph(AT91_PIN_PB8, 1);     /* enable PWM1 */
1045
1046        if (mask & (1 << AT91_PWM2))
1047                at91_set_B_periph(AT91_PIN_PC29, 1);    /* enable PWM2 */
1048
1049        if (mask & (1 << AT91_PWM3))
1050                at91_set_B_periph(AT91_PIN_PB29, 1);    /* enable PWM3 */
1051
1052        pwm_mask = mask;
1053
1054        platform_device_register(&at91sam9263_pwm0_device);
1055}
1056#else
1057void __init at91_add_device_pwm(u32 mask) {}
1058#endif
1059
1060
1061/* --------------------------------------------------------------------
1062 *  SSC -- Synchronous Serial Controller
1063 * -------------------------------------------------------------------- */
1064
1065#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
1066static u64 ssc0_dmamask = DMA_BIT_MASK(32);
1067
1068static struct resource ssc0_resources[] = {
1069        [0] = {
1070                .start  = AT91SAM9263_BASE_SSC0,
1071                .end    = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
1072                .flags  = IORESOURCE_MEM,
1073        },
1074        [1] = {
1075                .start  = AT91SAM9263_ID_SSC0,
1076                .end    = AT91SAM9263_ID_SSC0,
1077                .flags  = IORESOURCE_IRQ,
1078        },
1079};
1080
1081static struct platform_device at91sam9263_ssc0_device = {
1082        .name   = "ssc",
1083        .id     = 0,
1084        .dev    = {
1085                .dma_mask               = &ssc0_dmamask,
1086                .coherent_dma_mask      = DMA_BIT_MASK(32),
1087        },
1088        .resource       = ssc0_resources,
1089        .num_resources  = ARRAY_SIZE(ssc0_resources),
1090};
1091
1092static inline void configure_ssc0_pins(unsigned pins)
1093{
1094        if (pins & ATMEL_SSC_TF)
1095                at91_set_B_periph(AT91_PIN_PB0, 1);
1096        if (pins & ATMEL_SSC_TK)
1097                at91_set_B_periph(AT91_PIN_PB1, 1);
1098        if (pins & ATMEL_SSC_TD)
1099                at91_set_B_periph(AT91_PIN_PB2, 1);
1100        if (pins & ATMEL_SSC_RD)
1101                at91_set_B_periph(AT91_PIN_PB3, 1);
1102        if (pins & ATMEL_SSC_RK)
1103                at91_set_B_periph(AT91_PIN_PB4, 1);
1104        if (pins & ATMEL_SSC_RF)
1105                at91_set_B_periph(AT91_PIN_PB5, 1);
1106}
1107
1108static u64 ssc1_dmamask = DMA_BIT_MASK(32);
1109
1110static struct resource ssc1_resources[] = {
1111        [0] = {
1112                .start  = AT91SAM9263_BASE_SSC1,
1113                .end    = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
1114                .flags  = IORESOURCE_MEM,
1115        },
1116        [1] = {
1117                .start  = AT91SAM9263_ID_SSC1,
1118                .end    = AT91SAM9263_ID_SSC1,
1119                .flags  = IORESOURCE_IRQ,
1120        },
1121};
1122
1123static struct platform_device at91sam9263_ssc1_device = {
1124        .name   = "ssc",
1125        .id     = 1,
1126        .dev    = {
1127                .dma_mask               = &ssc1_dmamask,
1128                .coherent_dma_mask      = DMA_BIT_MASK(32),
1129        },
1130        .resource       = ssc1_resources,
1131        .num_resources  = ARRAY_SIZE(ssc1_resources),
1132};
1133
1134static inline void configure_ssc1_pins(unsigned pins)
1135{
1136        if (pins & ATMEL_SSC_TF)
1137                at91_set_A_periph(AT91_PIN_PB6, 1);
1138        if (pins & ATMEL_SSC_TK)
1139                at91_set_A_periph(AT91_PIN_PB7, 1);
1140        if (pins & ATMEL_SSC_TD)
1141                at91_set_A_periph(AT91_PIN_PB8, 1);
1142        if (pins & ATMEL_SSC_RD)
1143                at91_set_A_periph(AT91_PIN_PB9, 1);
1144        if (pins & ATMEL_SSC_RK)
1145                at91_set_A_periph(AT91_PIN_PB10, 1);
1146        if (pins & ATMEL_SSC_RF)
1147                at91_set_A_periph(AT91_PIN_PB11, 1);
1148}
1149
1150/*
1151 * SSC controllers are accessed through library code, instead of any
1152 * kind of all-singing/all-dancing driver.  For example one could be
1153 * used by a particular I2S audio codec's driver, while another one
1154 * on the same system might be used by a custom data capture driver.
1155 */
1156void __init at91_add_device_ssc(unsigned id, unsigned pins)
1157{
1158        struct platform_device *pdev;
1159
1160        /*
1161         * NOTE: caller is responsible for passing information matching
1162         * "pins" to whatever will be using each particular controller.
1163         */
1164        switch (id) {
1165        case AT91SAM9263_ID_SSC0:
1166                pdev = &at91sam9263_ssc0_device;
1167                configure_ssc0_pins(pins);
1168                break;
1169        case AT91SAM9263_ID_SSC1:
1170                pdev = &at91sam9263_ssc1_device;
1171                configure_ssc1_pins(pins);
1172                break;
1173        default:
1174                return;
1175        }
1176
1177        platform_device_register(pdev);
1178}
1179
1180#else
1181void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
1182#endif
1183
1184
1185/* --------------------------------------------------------------------
1186 *  UART
1187 * -------------------------------------------------------------------- */
1188
1189#if defined(CONFIG_SERIAL_ATMEL)
1190
1191static struct resource dbgu_resources[] = {
1192        [0] = {
1193                .start  = AT91_VA_BASE_SYS + AT91_DBGU,
1194                .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
1195                .flags  = IORESOURCE_MEM,
1196        },
1197        [1] = {
1198                .start  = AT91_ID_SYS,
1199                .end    = AT91_ID_SYS,
1200                .flags  = IORESOURCE_IRQ,
1201        },
1202};
1203
1204static struct atmel_uart_data dbgu_data = {
1205        .use_dma_tx     = 0,
1206        .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
1207        .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
1208};
1209
1210static u64 dbgu_dmamask = DMA_BIT_MASK(32);
1211
1212static struct platform_device at91sam9263_dbgu_device = {
1213        .name           = "atmel_usart",
1214        .id             = 0,
1215        .dev            = {
1216                                .dma_mask               = &dbgu_dmamask,
1217                                .coherent_dma_mask      = DMA_BIT_MASK(32),
1218                                .platform_data          = &dbgu_data,
1219        },
1220        .resource       = dbgu_resources,
1221        .num_resources  = ARRAY_SIZE(dbgu_resources),
1222};
1223
1224static inline void configure_dbgu_pins(void)
1225{
1226        at91_set_A_periph(AT91_PIN_PC30, 0);            /* DRXD */
1227        at91_set_A_periph(AT91_PIN_PC31, 1);            /* DTXD */
1228}
1229
1230static struct resource uart0_resources[] = {
1231        [0] = {
1232                .start  = AT91SAM9263_BASE_US0,
1233                .end    = AT91SAM9263_BASE_US0 + SZ_16K - 1,
1234                .flags  = IORESOURCE_MEM,
1235        },
1236        [1] = {
1237                .start  = AT91SAM9263_ID_US0,
1238                .end    = AT91SAM9263_ID_US0,
1239                .flags  = IORESOURCE_IRQ,
1240        },
1241};
1242
1243static struct atmel_uart_data uart0_data = {
1244        .use_dma_tx     = 1,
1245        .use_dma_rx     = 1,
1246};
1247
1248static u64 uart0_dmamask = DMA_BIT_MASK(32);
1249
1250static struct platform_device at91sam9263_uart0_device = {
1251        .name           = "atmel_usart",
1252        .id             = 1,
1253        .dev            = {
1254                                .dma_mask               = &uart0_dmamask,
1255                                .coherent_dma_mask      = DMA_BIT_MASK(32),
1256                                .platform_data          = &uart0_data,
1257        },
1258        .resource       = uart0_resources,
1259        .num_resources  = ARRAY_SIZE(uart0_resources),
1260};
1261
1262static inline void configure_usart0_pins(unsigned pins)
1263{
1264        at91_set_A_periph(AT91_PIN_PA26, 1);            /* TXD0 */
1265        at91_set_A_periph(AT91_PIN_PA27, 0);            /* RXD0 */
1266
1267        if (pins & ATMEL_UART_RTS)
1268                at91_set_A_periph(AT91_PIN_PA28, 0);    /* RTS0 */
1269        if (pins & ATMEL_UART_CTS)
1270                at91_set_A_periph(AT91_PIN_PA29, 0);    /* CTS0 */
1271}
1272
1273static struct resource uart1_resources[] = {
1274        [0] = {
1275                .start  = AT91SAM9263_BASE_US1,
1276                .end    = AT91SAM9263_BASE_US1 + SZ_16K - 1,
1277                .flags  = IORESOURCE_MEM,
1278        },
1279        [1] = {
1280                .start  = AT91SAM9263_ID_US1,
1281                .end    = AT91SAM9263_ID_US1,
1282                .flags  = IORESOURCE_IRQ,
1283        },
1284};
1285
1286static struct atmel_uart_data uart1_data = {
1287        .use_dma_tx     = 1,
1288        .use_dma_rx     = 1,
1289};
1290
1291static u64 uart1_dmamask = DMA_BIT_MASK(32);
1292
1293static struct platform_device at91sam9263_uart1_device = {
1294        .name           = "atmel_usart",
1295        .id             = 2,
1296        .dev            = {
1297                                .dma_mask               = &uart1_dmamask,
1298                                .coherent_dma_mask      = DMA_BIT_MASK(32),
1299                                .platform_data          = &uart1_data,
1300        },
1301        .resource       = uart1_resources,
1302        .num_resources  = ARRAY_SIZE(uart1_resources),
1303};
1304
1305static inline void configure_usart1_pins(unsigned pins)
1306{
1307        at91_set_A_periph(AT91_PIN_PD0, 1);             /* TXD1 */
1308        at91_set_A_periph(AT91_PIN_PD1, 0);             /* RXD1 */
1309
1310        if (pins & ATMEL_UART_RTS)
1311                at91_set_B_periph(AT91_PIN_PD7, 0);     /* RTS1 */
1312        if (pins & ATMEL_UART_CTS)
1313                at91_set_B_periph(AT91_PIN_PD8, 0);     /* CTS1 */
1314}
1315
1316static struct resource uart2_resources[] = {
1317        [0] = {
1318                .start  = AT91SAM9263_BASE_US2,
1319                .end    = AT91SAM9263_BASE_US2 + SZ_16K - 1,
1320                .flags  = IORESOURCE_MEM,
1321        },
1322        [1] = {
1323                .start  = AT91SAM9263_ID_US2,
1324                .end    = AT91SAM9263_ID_US2,
1325                .flags  = IORESOURCE_IRQ,
1326        },
1327};
1328
1329static struct atmel_uart_data uart2_data = {
1330        .use_dma_tx     = 1,
1331        .use_dma_rx     = 1,
1332};
1333
1334static u64 uart2_dmamask = DMA_BIT_MASK(32);
1335
1336static struct platform_device at91sam9263_uart2_device = {
1337        .name           = "atmel_usart",
1338        .id             = 3,
1339        .dev            = {
1340                                .dma_mask               = &uart2_dmamask,
1341                                .coherent_dma_mask      = DMA_BIT_MASK(32),
1342                                .platform_data          = &uart2_data,
1343        },
1344        .resource       = uart2_resources,
1345        .num_resources  = ARRAY_SIZE(uart2_resources),
1346};
1347
1348static inline void configure_usart2_pins(unsigned pins)
1349{
1350        at91_set_A_periph(AT91_PIN_PD2, 1);             /* TXD2 */
1351        at91_set_A_periph(AT91_PIN_PD3, 0);             /* RXD2 */
1352
1353        if (pins & ATMEL_UART_RTS)
1354                at91_set_B_periph(AT91_PIN_PD5, 0);     /* RTS2 */
1355        if (pins & ATMEL_UART_CTS)
1356                at91_set_B_periph(AT91_PIN_PD6, 0);     /* CTS2 */
1357}
1358
1359static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1360struct platform_device *atmel_default_console_device;   /* the serial console device */
1361
1362void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1363{
1364        struct platform_device *pdev;
1365        struct atmel_uart_data *pdata;
1366
1367        switch (id) {
1368                case 0:         /* DBGU */
1369                        pdev = &at91sam9263_dbgu_device;
1370                        configure_dbgu_pins();
1371                        break;
1372                case AT91SAM9263_ID_US0:
1373                        pdev = &at91sam9263_uart0_device;
1374                        configure_usart0_pins(pins);
1375                        break;
1376                case AT91SAM9263_ID_US1:
1377                        pdev = &at91sam9263_uart1_device;
1378                        configure_usart1_pins(pins);
1379                        break;
1380                case AT91SAM9263_ID_US2:
1381                        pdev = &at91sam9263_uart2_device;
1382                        configure_usart2_pins(pins);
1383                        break;
1384                default:
1385                        return;
1386        }
1387        pdata = pdev->dev.platform_data;
1388        pdata->num = portnr;            /* update to mapped ID */
1389
1390        if (portnr < ATMEL_MAX_UART)
1391                at91_uarts[portnr] = pdev;
1392}
1393
1394void __init at91_set_serial_console(unsigned portnr)
1395{
1396        if (portnr < ATMEL_MAX_UART) {
1397                atmel_default_console_device = at91_uarts[portnr];
1398                at91sam9263_set_console_clock(at91_uarts[portnr]->id);
1399        }
1400}
1401
1402void __init at91_add_device_serial(void)
1403{
1404        int i;
1405
1406        for (i = 0; i < ATMEL_MAX_UART; i++) {
1407                if (at91_uarts[i])
1408                        platform_device_register(at91_uarts[i]);
1409        }
1410
1411        if (!atmel_default_console_device)
1412                printk(KERN_INFO "AT91: No default serial console defined.\n");
1413}
1414#else
1415void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1416void __init at91_set_serial_console(unsigned portnr) {}
1417void __init at91_add_device_serial(void) {}
1418#endif
1419
1420
1421/* -------------------------------------------------------------------- */
1422/*
1423 * These devices are always present and don't need any board-specific
1424 * setup.
1425 */
1426static int __init at91_add_standard_devices(void)
1427{
1428        at91_add_device_rtt();
1429        at91_add_device_watchdog();
1430        at91_add_device_tc();
1431        return 0;
1432}
1433
1434arch_initcall(at91_add_standard_devices);
1435