#ifndef _ASM_POWERPC_PCI_BRIDGE_H
#define _ASM_POWERPC_PCI_BRIDGE_H
#ifdef __KERNEL__
/*
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>

struct device_node;

enum {
        /* Force re-assigning all resources (ignore firmware
         * setup completely)
         */
        PPC_PCI_REASSIGN_ALL_RSRC       = 0x00000001,

        /* Re-assign all bus numbers */
        PPC_PCI_REASSIGN_ALL_BUS        = 0x00000002,

        /* Do not try to assign, just use existing setup */
        PPC_PCI_PROBE_ONLY              = 0x00000004,

        /* Don't bother with ISA alignment unless the bridge has
         * ISA forwarding enabled
         */
        PPC_PCI_CAN_SKIP_ISA_ALIGN      = 0x00000008,

        /* Enable domain numbers in /proc */
        PPC_PCI_ENABLE_PROC_DOMAINS     = 0x00000010,
        /* ... except for domain 0 */
        PPC_PCI_COMPAT_DOMAIN_0         = 0x00000020,
};
#ifdef CONFIG_PCI
extern unsigned int ppc_pci_flags;

static inline void ppc_pci_set_flags(int flags)
{
        ppc_pci_flags = flags;
}

static inline void ppc_pci_add_flags(int flags)
{
        ppc_pci_flags |= flags;
}

static inline int ppc_pci_has_flag(int flag)
{
        return (ppc_pci_flags & flag);
}
#else
static inline void ppc_pci_set_flags(int flags) { }
static inline void ppc_pci_add_flags(int flags) { }
static inline int ppc_pci_has_flag(int flag)
{
        return 0;
}
#endif


/*
 * Structure of a PCI controller (host bridge)
 */
struct pci_controller {
        struct pci_bus *bus;
        char is_dynamic;
#ifdef CONFIG_PPC64
        int node;
#endif
        struct device_node *dn;
        struct list_head list_node;
        struct device *parent;

        int first_busno;
        int last_busno;
        int self_busno;

        void __iomem *io_base_virt;
#ifdef CONFIG_PPC64
        void *io_base_alloc;
#endif
        resource_size_t io_base_phys;
        resource_size_t pci_io_size;

        /* Some machines (PReP) have a non 1:1 mapping of
         * the PCI memory space in the CPU bus space
         */
        resource_size_t pci_mem_offset;

        /* Some machines have a special region to forward the ISA
         * "memory" cycles such as VGA memory regions. Left to 0
         * if unsupported
         */
        resource_size_t isa_mem_phys;
        resource_size_t isa_mem_size;

        struct pci_ops *ops;
        unsigned int __iomem *cfg_addr;
        void __iomem *cfg_data;

        /*
         * Used for variants of PCI indirect handling and possible quirks:
         *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
         *  EXT_REG - provides access to PCI-e extended registers
         *  SURPRESS_PRIMARY_BUS - we suppress the setting of PCI_PRIMARY_BUS
         *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
         *   to determine which bus number to match on when generating type0
         *   config cycles
         *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
         *   hanging if we don't have link and try to do config cycles to
         *   anything but the PHB.  Only allow talking to the PHB if this is
         *   set.
         *  BIG_ENDIAN - cfg_addr is a big endian register
         *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
         *   the PLB4.  Effectively disable MRM commands by setting this.
         */
#define PPC_INDIRECT_TYPE_SET_CFG_TYPE          0x00000001
#define PPC_INDIRECT_TYPE_EXT_REG               0x00000002
#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS  0x00000004
#define PPC_INDIRECT_TYPE_NO_PCIE_LINK          0x00000008
#define PPC_INDIRECT_TYPE_BIG_ENDIAN            0x00000010
#define PPC_INDIRECT_TYPE_BROKEN_MRM            0x00000020
        u32 indirect_type;
        /* Currently, we limit ourselves to 1 IO range and 3 mem
         * ranges since the common pci_bus structure can't handle more
         */
        struct resource io_resource;
        struct resource mem_resources[3];
        int global_number;              /* PCI domain number */

        resource_size_t dma_window_base_cur;
        resource_size_t dma_window_size;

#ifdef CONFIG_PPC64
        unsigned long buid;

        void *private_data;
#endif  /* CONFIG_PPC64 */
};

/* These are used for config access before all the PCI probing
   has been done. */
extern int early_read_config_byte(struct pci_controller *hose, int bus,
                        int dev_fn, int where, u8 *val);
extern int early_read_config_word(struct pci_controller *hose, int bus,
                        int dev_fn, int where, u16 *val);
extern int early_read_config_dword(struct pci_controller *hose, int bus,
                        int dev_fn, int where, u32 *val);
extern int early_write_config_byte(struct pci_controller *hose, int bus,
                        int dev_fn, int where, u8 val);
extern int early_write_config_word(struct pci_controller *hose, int bus,
                        int dev_fn, int where, u16 val);
extern int early_write_config_dword(struct pci_controller *hose, int bus,
                        int dev_fn, int where, u32 val);

extern int early_find_capability(struct pci_controller *hose, int bus,
                                 int dev_fn, int cap);

extern void setup_indirect_pci(struct pci_controller* hose,
                               resource_size_t cfg_addr,
                               resource_size_t cfg_data, u32 flags);

static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
        return bus->sysdata;
}

#ifndef CONFIG_PPC64

static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
{
        struct pci_controller *host;

        if (bus->self)
                return pci_device_to_OF_node(bus->self);
        host = pci_bus_to_host(bus);
        return host ? host->dn : NULL;
}

static inline int isa_vaddr_is_ioport(void __iomem *address)
{
        /* No specific ISA handling on ppc32 at this stage, it
         * all goes through PCI
         */
        return 0;
}

#else   /* CONFIG_PPC64 */

/*
 * PCI stuff, for nodes representing PCI devices, pointed to
 * by device_node->data.
 */
struct iommu_table;

struct pci_dn {
        int     busno;                  /* pci bus number */
        int     devfn;                  /* pci device and function number */

        struct  pci_controller *phb;    /* for pci devices */
        struct  iommu_table *iommu_table;       /* for phb's or bridges */
        struct  device_node *node;      /* back-pointer to the device_node */

        int     pci_ext_config_space;   /* for pci devices */

#ifdef CONFIG_EEH
        struct  pci_dev *pcidev;        /* back-pointer to the pci device */
        int     class_code;             /* pci device class */
        int     eeh_mode;               /* See eeh.h for possible EEH_MODEs */
        int     eeh_config_addr;
        int     eeh_pe_config_addr; /* new-style partition endpoint address */
        int     eeh_check_count;        /* # times driver ignored error */
        int     eeh_freeze_count;       /* # times this device froze up. */
        int     eeh_false_positives;    /* # times this device reported #ff's */
        u32     config_space[16];       /* saved PCI config space */
#endif
};

/* Get the pointer to a device_node's pci_dn */
#define PCI_DN(dn)      ((struct pci_dn *) (dn)->data)

extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
extern void * update_dn_pci_info(struct device_node *dn, void *data);

/* Get a device_node from a pci_dev.  This code must be fast except
 * in the case where the sysdata is incorrect and needs to be fixed
 * up (this will only happen once). */
static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
{
        return dev->dev.of_node ? dev->dev.of_node : fetch_dev_dn(dev);
}

static inline int pci_device_from_OF_node(struct device_node *np,
                                          u8 *bus, u8 *devfn)
{
        if (!PCI_DN(np))
                return -ENODEV;
        *bus = PCI_DN(np)->busno;
        *devfn = PCI_DN(np)->devfn;
        return 0;
}

static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
{
        if (bus->self)
                return pci_device_to_OF_node(bus->self);
        else
                return bus->dev.of_node; /* Must be root bus (PHB) */
}

/** Find the bus corresponding to the indicated device node */
extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);

/** Remove all of the PCI devices under this bus */
extern void pcibios_remove_pci_devices(struct pci_bus *bus);

/** Discover new pci devices under this bus, and add them */
extern void pcibios_add_pci_devices(struct pci_bus *bus);


extern void isa_bridge_find_early(struct pci_controller *hose);

static inline int isa_vaddr_is_ioport(void __iomem *address)
{
        /* Check if address hits the reserved legacy IO range */
        unsigned long ea = (unsigned long)address;
        return ea >= ISA_IO_BASE && ea < ISA_IO_END;
}

extern int pcibios_unmap_io_space(struct pci_bus *bus);
extern int pcibios_map_io_space(struct pci_bus *bus);

#ifdef CONFIG_NUMA
#define PHB_SET_NODE(PHB, NODE)         ((PHB)->node = (NODE))
#else
#define PHB_SET_NODE(PHB, NODE)         ((PHB)->node = -1)
#endif

#endif  /* CONFIG_PPC64 */

/* Get the PCI host controller for an OF device */
extern struct pci_controller *pci_find_hose_for_OF_device(
                        struct device_node* node);

/* Fill up host controller resources from the OF node */
extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
                        struct device_node *dev, int primary);

/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
extern void pcibios_setup_phb_resources(struct pci_controller *hose);

#ifdef CONFIG_PCI
extern int pcibios_vaddr_is_ioport(void __iomem *address);
#else
static inline int pcibios_vaddr_is_ioport(void __iomem *address)
{
        return 0;
}
#endif  /* CONFIG_PCI */

#endif  /* __KERNEL__ */
#endif  /* _ASM_POWERPC_PCI_BRIDGE_H */