linux/arch/x86/kernel/apic/summit_32.c
<<
>>
Prefs
   1/*
   2 * IBM Summit-Specific Code
   3 *
   4 * Written By: Matthew Dobson, IBM Corporation
   5 *
   6 * Copyright (c) 2003 IBM Corp.
   7 *
   8 * All rights reserved.
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2 of the License, or (at
  13 * your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful, but
  16 * WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  18 * NON INFRINGEMENT.  See the GNU General Public License for more
  19 * details.
  20 *
  21 * You should have received a copy of the GNU General Public License
  22 * along with this program; if not, write to the Free Software
  23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  24 *
  25 * Send feedback to <colpatch@us.ibm.com>
  26 *
  27 */
  28
  29#include <linux/mm.h>
  30#include <linux/init.h>
  31#include <asm/io.h>
  32#include <asm/bios_ebda.h>
  33
  34/*
  35 * APIC driver for the IBM "Summit" chipset.
  36 */
  37#include <linux/threads.h>
  38#include <linux/cpumask.h>
  39#include <asm/mpspec.h>
  40#include <asm/apic.h>
  41#include <asm/smp.h>
  42#include <asm/fixmap.h>
  43#include <asm/apicdef.h>
  44#include <asm/ipi.h>
  45#include <linux/kernel.h>
  46#include <linux/string.h>
  47#include <linux/gfp.h>
  48#include <linux/smp.h>
  49
  50static unsigned summit_get_apic_id(unsigned long x)
  51{
  52        return (x >> 24) & 0xFF;
  53}
  54
  55static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector)
  56{
  57        default_send_IPI_mask_sequence_logical(mask, vector);
  58}
  59
  60static void summit_send_IPI_allbutself(int vector)
  61{
  62        default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector);
  63}
  64
  65static void summit_send_IPI_all(int vector)
  66{
  67        summit_send_IPI_mask(cpu_online_mask, vector);
  68}
  69
  70#include <asm/tsc.h>
  71
  72extern int use_cyclone;
  73
  74#ifdef CONFIG_X86_SUMMIT_NUMA
  75static void setup_summit(void);
  76#else
  77static inline void setup_summit(void) {}
  78#endif
  79
  80static int summit_mps_oem_check(struct mpc_table *mpc, char *oem,
  81                char *productid)
  82{
  83        if (!strncmp(oem, "IBM ENSW", 8) &&
  84                        (!strncmp(productid, "VIGIL SMP", 9)
  85                         || !strncmp(productid, "EXA", 3)
  86                         || !strncmp(productid, "RUTHLESS SMP", 12))){
  87                mark_tsc_unstable("Summit based system");
  88                use_cyclone = 1; /*enable cyclone-timer*/
  89                setup_summit();
  90                return 1;
  91        }
  92        return 0;
  93}
  94
  95/* Hook from generic ACPI tables.c */
  96static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
  97{
  98        if (!strncmp(oem_id, "IBM", 3) &&
  99            (!strncmp(oem_table_id, "SERVIGIL", 8)
 100             || !strncmp(oem_table_id, "EXA", 3))){
 101                mark_tsc_unstable("Summit based system");
 102                use_cyclone = 1; /*enable cyclone-timer*/
 103                setup_summit();
 104                return 1;
 105        }
 106        return 0;
 107}
 108
 109struct rio_table_hdr {
 110        unsigned char version;      /* Version number of this data structure           */
 111                                    /* Version 3 adds chassis_num & WP_index           */
 112        unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil)   */
 113        unsigned char num_rio_dev;  /* # of RIO I/O devices (Cyclones and Winnipegs)   */
 114} __attribute__((packed));
 115
 116struct scal_detail {
 117        unsigned char node_id;      /* Scalability Node ID                             */
 118        unsigned long CBAR;         /* Address of 1MB register space                   */
 119        unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
 120        unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
 121        unsigned char port1node;    /* Node ID port connected to: 0xFF = None          */
 122        unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
 123        unsigned char port2node;    /* Node ID port connected to: 0xFF = None          */
 124        unsigned char port2port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
 125        unsigned char chassis_num;  /* 1 based Chassis number (1 = boot node)          */
 126} __attribute__((packed));
 127
 128struct rio_detail {
 129        unsigned char node_id;      /* RIO Node ID                                     */
 130        unsigned long BBAR;         /* Address of 1MB register space                   */
 131        unsigned char type;         /* Type of device                                  */
 132        unsigned char owner_id;     /* For WPEG: Node ID of Cyclone that owns this WPEG*/
 133                                    /* For CYC:  Node ID of Twister that owns this CYC */
 134        unsigned char port0node;    /* Node ID port connected to: 0xFF=None            */
 135        unsigned char port0port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
 136        unsigned char port1node;    /* Node ID port connected to: 0xFF=None            */
 137        unsigned char port1port;    /* Port num port connected to: 0,1,2, or 0xFF=None */
 138        unsigned char first_slot;   /* For WPEG: Lowest slot number below this WPEG    */
 139                                    /* For CYC:  0                                     */
 140        unsigned char status;       /* For WPEG: Bit 0 = 1 : the XAPIC is used         */
 141                                    /*                 = 0 : the XAPIC is not used, ie:*/
 142                                    /*                     ints fwded to another XAPIC */
 143                                    /*           Bits1:7 Reserved                      */
 144                                    /* For CYC:  Bits0:7 Reserved                      */
 145        unsigned char WP_index;     /* For WPEG: WPEG instance index - lower ones have */
 146                                    /*           lower slot numbers/PCI bus numbers    */
 147                                    /* For CYC:  No meaning                            */
 148        unsigned char chassis_num;  /* 1 based Chassis number                          */
 149                                    /* For LookOut WPEGs this field indicates the      */
 150                                    /* Expansion Chassis #, enumerated from Boot       */
 151                                    /* Node WPEG external port, then Boot Node CYC     */
 152                                    /* external port, then Next Vigil chassis WPEG     */
 153                                    /* external port, etc.                             */
 154                                    /* Shared Lookouts have only 1 chassis number (the */
 155                                    /* first one assigned)                             */
 156} __attribute__((packed));
 157
 158
 159typedef enum {
 160        CompatTwister = 0,  /* Compatibility Twister               */
 161        AltTwister    = 1,  /* Alternate Twister of internal 8-way */
 162        CompatCyclone = 2,  /* Compatibility Cyclone               */
 163        AltCyclone    = 3,  /* Alternate Cyclone of internal 8-way */
 164        CompatWPEG    = 4,  /* Compatibility WPEG                  */
 165        AltWPEG       = 5,  /* Second Planar WPEG                  */
 166        LookOutAWPEG  = 6,  /* LookOut WPEG                        */
 167        LookOutBWPEG  = 7,  /* LookOut WPEG                        */
 168} node_type;
 169
 170static inline int is_WPEG(struct rio_detail *rio){
 171        return (rio->type == CompatWPEG || rio->type == AltWPEG ||
 172                rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
 173}
 174
 175#define SUMMIT_APIC_DFR_VALUE   (APIC_DFR_CLUSTER)
 176
 177static const struct cpumask *summit_target_cpus(void)
 178{
 179        /* CPU_MASK_ALL (0xff) has undefined behaviour with
 180         * dest_LowestPrio mode logical clustered apic interrupt routing
 181         * Just start on cpu 0.  IRQ balancing will spread load
 182         */
 183        return cpumask_of(0);
 184}
 185
 186static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid)
 187{
 188        return 0;
 189}
 190
 191/* we don't use the phys_cpu_present_map to indicate apicid presence */
 192static unsigned long summit_check_apicid_present(int bit)
 193{
 194        return 1;
 195}
 196
 197static int summit_early_logical_apicid(int cpu)
 198{
 199        int count = 0;
 200        u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu);
 201        u8 my_cluster = APIC_CLUSTER(my_id);
 202#ifdef CONFIG_SMP
 203        u8 lid;
 204        int i;
 205
 206        /* Create logical APIC IDs by counting CPUs already in cluster. */
 207        for (count = 0, i = nr_cpu_ids; --i >= 0; ) {
 208                lid = early_per_cpu(x86_cpu_to_logical_apicid, i);
 209                if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster)
 210                        ++count;
 211        }
 212#endif
 213        /* We only have a 4 wide bitmap in cluster mode.  If a deranged
 214         * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
 215        BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
 216        return my_cluster | (1UL << count);
 217}
 218
 219static void summit_init_apic_ldr(void)
 220{
 221        int cpu = smp_processor_id();
 222        unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
 223        unsigned long val;
 224
 225        apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE);
 226        val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
 227        val |= SET_APIC_LOGICAL_ID(id);
 228        apic_write(APIC_LDR, val);
 229}
 230
 231static int summit_apic_id_registered(void)
 232{
 233        return 1;
 234}
 235
 236static void summit_setup_apic_routing(void)
 237{
 238        printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
 239                                                nr_ioapics);
 240}
 241
 242static int summit_cpu_present_to_apicid(int mps_cpu)
 243{
 244        if (mps_cpu < nr_cpu_ids)
 245                return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
 246        else
 247                return BAD_APICID;
 248}
 249
 250static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap)
 251{
 252        /* For clustered we don't have a good way to do this yet - hack */
 253        physids_promote(0x0FL, retmap);
 254}
 255
 256static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap)
 257{
 258        physid_set_mask_of_physid(0, retmap);
 259}
 260
 261static int summit_check_phys_apicid_present(int physical_apicid)
 262{
 263        return 1;
 264}
 265
 266static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
 267{
 268        unsigned int round = 0;
 269        int cpu, apicid = 0;
 270
 271        /*
 272         * The cpus in the mask must all be on the apic cluster.
 273         */
 274        for_each_cpu(cpu, cpumask) {
 275                int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
 276
 277                if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
 278                        printk("%s: Not a valid mask!\n", __func__);
 279                        return BAD_APICID;
 280                }
 281                apicid |= new_apicid;
 282                round++;
 283        }
 284        return apicid;
 285}
 286
 287static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask,
 288                              const struct cpumask *andmask)
 289{
 290        int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0);
 291        cpumask_var_t cpumask;
 292
 293        if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC))
 294                return apicid;
 295
 296        cpumask_and(cpumask, inmask, andmask);
 297        cpumask_and(cpumask, cpumask, cpu_online_mask);
 298        apicid = summit_cpu_mask_to_apicid(cpumask);
 299
 300        free_cpumask_var(cpumask);
 301
 302        return apicid;
 303}
 304
 305/*
 306 * cpuid returns the value latched in the HW at reset, not the APIC ID
 307 * register's value.  For any box whose BIOS changes APIC IDs, like
 308 * clustered APIC systems, we must use hard_smp_processor_id.
 309 *
 310 * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
 311 */
 312static int summit_phys_pkg_id(int cpuid_apic, int index_msb)
 313{
 314        return hard_smp_processor_id() >> index_msb;
 315}
 316
 317static int probe_summit(void)
 318{
 319        /* probed later in mptable/ACPI hooks */
 320        return 0;
 321}
 322
 323static void summit_vector_allocation_domain(int cpu, struct cpumask *retmask)
 324{
 325        /* Careful. Some cpus do not strictly honor the set of cpus
 326         * specified in the interrupt destination when using lowest
 327         * priority interrupt delivery mode.
 328         *
 329         * In particular there was a hyperthreading cpu observed to
 330         * deliver interrupts to the wrong hyperthread when only one
 331         * hyperthread was specified in the interrupt desitination.
 332         */
 333        cpumask_clear(retmask);
 334        cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
 335}
 336
 337#ifdef CONFIG_X86_SUMMIT_NUMA
 338static struct rio_table_hdr *rio_table_hdr;
 339static struct scal_detail   *scal_devs[MAX_NUMNODES];
 340static struct rio_detail    *rio_devs[MAX_NUMNODES*4];
 341
 342#ifndef CONFIG_X86_NUMAQ
 343static int mp_bus_id_to_node[MAX_MP_BUSSES];
 344#endif
 345
 346static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 347{
 348        int twister = 0, node = 0;
 349        int i, bus, num_buses;
 350
 351        for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
 352                if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
 353                        twister = rio_devs[i]->owner_id;
 354                        break;
 355                }
 356        }
 357        if (i == rio_table_hdr->num_rio_dev) {
 358                printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
 359                return last_bus;
 360        }
 361
 362        for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
 363                if (scal_devs[i]->node_id == twister) {
 364                        node = scal_devs[i]->node_id;
 365                        break;
 366                }
 367        }
 368        if (i == rio_table_hdr->num_scal_dev) {
 369                printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
 370                return last_bus;
 371        }
 372
 373        switch (rio_devs[wpeg_num]->type) {
 374        case CompatWPEG:
 375                /*
 376                 * The Compatibility Winnipeg controls the 2 legacy buses,
 377                 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
 378                 * a PCI-PCI bridge card is used in either slot: total 5 buses.
 379                 */
 380                num_buses = 5;
 381                break;
 382        case AltWPEG:
 383                /*
 384                 * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
 385                 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
 386                 * the "extra" buses for each of those slots: total 7 buses.
 387                 */
 388                num_buses = 7;
 389                break;
 390        case LookOutAWPEG:
 391        case LookOutBWPEG:
 392                /*
 393                 * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
 394                 * & the "extra" buses for each of those slots: total 9 buses.
 395                 */
 396                num_buses = 9;
 397                break;
 398        default:
 399                printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
 400                return last_bus;
 401        }
 402
 403        for (bus = last_bus; bus < last_bus + num_buses; bus++)
 404                mp_bus_id_to_node[bus] = node;
 405        return bus;
 406}
 407
 408static int build_detail_arrays(void)
 409{
 410        unsigned long ptr;
 411        int i, scal_detail_size, rio_detail_size;
 412
 413        if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
 414                printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
 415                return 0;
 416        }
 417
 418        switch (rio_table_hdr->version) {
 419        default:
 420                printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
 421                return 0;
 422        case 2:
 423                scal_detail_size = 11;
 424                rio_detail_size = 13;
 425                break;
 426        case 3:
 427                scal_detail_size = 12;
 428                rio_detail_size = 15;
 429                break;
 430        }
 431
 432        ptr = (unsigned long)rio_table_hdr + 3;
 433        for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
 434                scal_devs[i] = (struct scal_detail *)ptr;
 435
 436        for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
 437                rio_devs[i] = (struct rio_detail *)ptr;
 438
 439        return 1;
 440}
 441
 442void setup_summit(void)
 443{
 444        unsigned long           ptr;
 445        unsigned short          offset;
 446        int                     i, next_wpeg, next_bus = 0;
 447
 448        /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */
 449        ptr = get_bios_ebda();
 450        ptr = (unsigned long)phys_to_virt(ptr);
 451
 452        rio_table_hdr = NULL;
 453        offset = 0x180;
 454        while (offset) {
 455                /* The block id is stored in the 2nd word */
 456                if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
 457                        /* set the pointer past the offset & block id */
 458                        rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
 459                        break;
 460                }
 461                /* The next offset is stored in the 1st word.  0 means no more */
 462                offset = *((unsigned short *)(ptr + offset));
 463        }
 464        if (!rio_table_hdr) {
 465                printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
 466                return;
 467        }
 468
 469        if (!build_detail_arrays())
 470                return;
 471
 472        /* The first Winnipeg we're looking for has an index of 0 */
 473        next_wpeg = 0;
 474        do {
 475                for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
 476                        if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
 477                                /* It's the Winnipeg we're looking for! */
 478                                next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
 479                                next_wpeg++;
 480                                break;
 481                        }
 482                }
 483                /*
 484                 * If we go through all Rio devices and don't find one with
 485                 * the next index, it means we've found all the Winnipegs,
 486                 * and thus all the PCI buses.
 487                 */
 488                if (i == rio_table_hdr->num_rio_dev)
 489                        next_wpeg = 0;
 490        } while (next_wpeg != 0);
 491}
 492#endif
 493
 494static struct apic apic_summit = {
 495
 496        .name                           = "summit",
 497        .probe                          = probe_summit,
 498        .acpi_madt_oem_check            = summit_acpi_madt_oem_check,
 499        .apic_id_registered             = summit_apic_id_registered,
 500
 501        .irq_delivery_mode              = dest_LowestPrio,
 502        /* logical delivery broadcast to all CPUs: */
 503        .irq_dest_mode                  = 1,
 504
 505        .target_cpus                    = summit_target_cpus,
 506        .disable_esr                    = 1,
 507        .dest_logical                   = APIC_DEST_LOGICAL,
 508        .check_apicid_used              = summit_check_apicid_used,
 509        .check_apicid_present           = summit_check_apicid_present,
 510
 511        .vector_allocation_domain       = summit_vector_allocation_domain,
 512        .init_apic_ldr                  = summit_init_apic_ldr,
 513
 514        .ioapic_phys_id_map             = summit_ioapic_phys_id_map,
 515        .setup_apic_routing             = summit_setup_apic_routing,
 516        .multi_timer_check              = NULL,
 517        .cpu_present_to_apicid          = summit_cpu_present_to_apicid,
 518        .apicid_to_cpu_present          = summit_apicid_to_cpu_present,
 519        .setup_portio_remap             = NULL,
 520        .check_phys_apicid_present      = summit_check_phys_apicid_present,
 521        .enable_apic_mode               = NULL,
 522        .phys_pkg_id                    = summit_phys_pkg_id,
 523        .mps_oem_check                  = summit_mps_oem_check,
 524
 525        .get_apic_id                    = summit_get_apic_id,
 526        .set_apic_id                    = NULL,
 527        .apic_id_mask                   = 0xFF << 24,
 528
 529        .cpu_mask_to_apicid             = summit_cpu_mask_to_apicid,
 530        .cpu_mask_to_apicid_and         = summit_cpu_mask_to_apicid_and,
 531
 532        .send_IPI_mask                  = summit_send_IPI_mask,
 533        .send_IPI_mask_allbutself       = NULL,
 534        .send_IPI_allbutself            = summit_send_IPI_allbutself,
 535        .send_IPI_all                   = summit_send_IPI_all,
 536        .send_IPI_self                  = default_send_IPI_self,
 537
 538        .trampoline_phys_low            = DEFAULT_TRAMPOLINE_PHYS_LOW,
 539        .trampoline_phys_high           = DEFAULT_TRAMPOLINE_PHYS_HIGH,
 540
 541        .wait_for_init_deassert         = default_wait_for_init_deassert,
 542
 543        .smp_callin_clear_local_apic    = NULL,
 544        .inquire_remote_apic            = default_inquire_remote_apic,
 545
 546        .read                           = native_apic_mem_read,
 547        .write                          = native_apic_mem_write,
 548        .icr_read                       = native_apic_icr_read,
 549        .icr_write                      = native_apic_icr_write,
 550        .wait_icr_idle                  = native_apic_wait_icr_idle,
 551        .safe_wait_icr_idle             = native_safe_apic_wait_icr_idle,
 552
 553        .x86_32_early_logical_apicid    = summit_early_logical_apicid,
 554};
 555
 556apic_driver(apic_summit);
 557