/*
 * Marvell Wireless LAN device driver: functions for station ioctl
 *
 * Copyright (C) 2011, Marvell International Ltd.
 *
 * This software file (the "File") is distributed by Marvell International
 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
 * (the "License").  You may use, redistribute and/or modify this File in
 * accordance with the terms and conditions of the License, a copy of which
 * is available by writing to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
 *
 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
 * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
 * this warranty disclaimer.
 */

#include "decl.h"
#include "ioctl.h"
#include "util.h"
#include "fw.h"
#include "main.h"
#include "wmm.h"
#include "11n.h"
#include "cfg80211.h"

/*
 * Copies the multicast address list from device to driver.
 *
 * This function does not validate the destination memory for
 * size, and the calling function must ensure enough memory is
 * available.
 */
int mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
                            struct net_device *dev)
{
        int i = 0;
        struct netdev_hw_addr *ha;

        netdev_for_each_mc_addr(ha, dev)
                memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);

        return i;
}

/*
 * Wait queue completion handler.
 *
 * This function waits on a cmd wait queue. It also cancels the pending
 * request after waking up, in case of errors.
 */
int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter)
{
        bool cancel_flag = false;
        int status = adapter->cmd_wait_q.status;

        dev_dbg(adapter->dev, "cmd pending\n");
        atomic_inc(&adapter->cmd_pending);

        /* Status pending, wake up main process */
        queue_work(adapter->workqueue, &adapter->main_work);

        /* Wait for completion */
        wait_event_interruptible(adapter->cmd_wait_q.wait,
                                        adapter->cmd_wait_q.condition);
        if (!adapter->cmd_wait_q.condition)
                cancel_flag = true;

        if (cancel_flag) {
                mwifiex_cancel_pending_ioctl(adapter);
                dev_dbg(adapter->dev, "cmd cancel\n");
        }
        adapter->cmd_wait_q.status = 0;

        return status;
}

/*
 * This function prepares the correct firmware command and
 * issues it to set the multicast list.
 *
 * This function can be used to enable promiscuous mode, or enable all
 * multicast packets, or to enable selective multicast.
 */
int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
                                struct mwifiex_multicast_list *mcast_list)
{
        int ret = 0;
        u16 old_pkt_filter;

        old_pkt_filter = priv->curr_pkt_filter;

        if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
                dev_dbg(priv->adapter->dev, "info: Enable Promiscuous mode\n");
                priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
                priv->curr_pkt_filter &=
                        ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
        } else {
                /* Multicast */
                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
                if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) {
                        dev_dbg(priv->adapter->dev,
                                "info: Enabling All Multicast!\n");
                        priv->curr_pkt_filter |=
                                HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
                } else {
                        priv->curr_pkt_filter &=
                                ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
                        if (mcast_list->num_multicast_addr) {
                                dev_dbg(priv->adapter->dev,
                                        "info: Set multicast list=%d\n",
                                       mcast_list->num_multicast_addr);
                                /* Set multicast addresses to firmware */
                                if (old_pkt_filter == priv->curr_pkt_filter) {
                                        /* Send request to firmware */
                                        ret = mwifiex_send_cmd_async(priv,
                                                HostCmd_CMD_MAC_MULTICAST_ADR,
                                                HostCmd_ACT_GEN_SET, 0,
                                                mcast_list);
                                } else {
                                        /* Send request to firmware */
                                        ret = mwifiex_send_cmd_async(priv,
                                                HostCmd_CMD_MAC_MULTICAST_ADR,
                                                HostCmd_ACT_GEN_SET, 0,
                                                mcast_list);
                                }
                        }
                }
        }
        dev_dbg(priv->adapter->dev,
                "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
               old_pkt_filter, priv->curr_pkt_filter);
        if (old_pkt_filter != priv->curr_pkt_filter) {
                ret = mwifiex_send_cmd_async(priv, HostCmd_CMD_MAC_CONTROL,
                                             HostCmd_ACT_GEN_SET,
                                             0, &priv->curr_pkt_filter);
        }

        return ret;
}

/*
 * In Ad-Hoc mode, the IBSS is created if not found in scan list.
 * In both Ad-Hoc and infra mode, an deauthentication is performed
 * first.
 */
int mwifiex_bss_start(struct mwifiex_private *priv,
                      struct mwifiex_ssid_bssid *ssid_bssid)
{
        int ret;
        struct mwifiex_adapter *adapter = priv->adapter;
        s32 i = -1;

        priv->scan_block = false;
        if (!ssid_bssid)
                return -1;

        if (priv->bss_mode == NL80211_IFTYPE_STATION) {
                /* Infra mode */
                ret = mwifiex_deauthenticate(priv, NULL);
                if (ret)
                        return ret;

                /* Search for the requested SSID in the scan table */
                if (ssid_bssid->ssid.ssid_len)
                        i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid,
                                                NULL, NL80211_IFTYPE_STATION);
                else
                        i = mwifiex_find_bssid_in_list(priv,
                                                (u8 *) &ssid_bssid->bssid,
                                                NL80211_IFTYPE_STATION);
                if (i < 0)
                        return -1;

                dev_dbg(adapter->dev,
                        "info: SSID found in scan list ... associating...\n");

                /* Clear any past association response stored for
                 * application retrieval */
                priv->assoc_rsp_size = 0;
                ret = mwifiex_associate(priv, &adapter->scan_table[i]);
                if (ret)
                        return ret;
        } else {
                /* Adhoc mode */
                /* If the requested SSID matches current SSID, return */
                if (ssid_bssid->ssid.ssid_len &&
                    (!mwifiex_ssid_cmp
                     (&priv->curr_bss_params.bss_descriptor.ssid,
                      &ssid_bssid->ssid)))
                        return 0;

                /* Exit Adhoc mode first */
                dev_dbg(adapter->dev, "info: Sending Adhoc Stop\n");
                ret = mwifiex_deauthenticate(priv, NULL);
                if (ret)
                        return ret;

                priv->adhoc_is_link_sensed = false;

                /* Search for the requested network in the scan table */
                if (ssid_bssid->ssid.ssid_len)
                        i = mwifiex_find_ssid_in_list(priv,
                                                      &ssid_bssid->ssid, NULL,
                                                      NL80211_IFTYPE_ADHOC);
                else
                        i = mwifiex_find_bssid_in_list(priv,
                                                       (u8 *)&ssid_bssid->bssid,
                                                       NL80211_IFTYPE_ADHOC);

                if (i >= 0) {
                        dev_dbg(adapter->dev, "info: network found in scan"
                                                        " list. Joining...\n");
                        ret = mwifiex_adhoc_join(priv, &adapter->scan_table[i]);
                        if (ret)
                                return ret;
                } else {
                        dev_dbg(adapter->dev, "info: Network not found in "
                                "the list, creating adhoc with ssid = %s\n",
                               ssid_bssid->ssid.ssid);
                        ret = mwifiex_adhoc_start(priv, &ssid_bssid->ssid);
                        if (ret)
                                return ret;
                }
        }

        return ret;
}

/*
 * IOCTL request handler to set host sleep configuration.
 *
 * This function prepares the correct firmware command and
 * issues it.
 */
int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
                          int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)

{
        struct mwifiex_adapter *adapter = priv->adapter;
        int status = 0;
        u32 prev_cond = 0;

        if (!hs_cfg)
                return -ENOMEM;

        switch (action) {
        case HostCmd_ACT_GEN_SET:
                if (adapter->pps_uapsd_mode) {
                        dev_dbg(adapter->dev, "info: Host Sleep IOCTL"
                                " is blocked in UAPSD/PPS mode\n");
                        status = -1;
                        break;
                }
                if (hs_cfg->is_invoke_hostcmd) {
                        if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL) {
                                if (!adapter->is_hs_configured)
                                        /* Already cancelled */
                                        break;
                                /* Save previous condition */
                                prev_cond = le32_to_cpu(adapter->hs_cfg
                                                        .conditions);
                                adapter->hs_cfg.conditions =
                                                cpu_to_le32(hs_cfg->conditions);
                        } else if (hs_cfg->conditions) {
                                adapter->hs_cfg.conditions =
                                                cpu_to_le32(hs_cfg->conditions);
                                adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
                                if (hs_cfg->gap)
                                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
                        } else if (adapter->hs_cfg.conditions ==
                                                cpu_to_le32(
                                                HOST_SLEEP_CFG_CANCEL)) {
                                /* Return failure if no parameters for HS
                                   enable */
                                status = -1;
                                break;
                        }
                        if (cmd_type == MWIFIEX_SYNC_CMD)
                                status = mwifiex_send_cmd_sync(priv,
                                                HostCmd_CMD_802_11_HS_CFG_ENH,
                                                HostCmd_ACT_GEN_SET, 0,
                                                &adapter->hs_cfg);
                        else
                                status = mwifiex_send_cmd_async(priv,
                                                HostCmd_CMD_802_11_HS_CFG_ENH,
                                                HostCmd_ACT_GEN_SET, 0,
                                                &adapter->hs_cfg);
                        if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL)
                                /* Restore previous condition */
                                adapter->hs_cfg.conditions =
                                                cpu_to_le32(prev_cond);
                } else {
                        adapter->hs_cfg.conditions =
                                cpu_to_le32(hs_cfg->conditions);
                        adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
                        adapter->hs_cfg.gap = (u8)hs_cfg->gap;
                }
                break;
        case HostCmd_ACT_GEN_GET:
                hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
                hs_cfg->gpio = adapter->hs_cfg.gpio;
                hs_cfg->gap = adapter->hs_cfg.gap;
                break;
        default:
                status = -1;
                break;
        }

        return status;
}

/*
 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_cancel_hs(struct mwifiex_private *priv, int cmd_type)
{
        struct mwifiex_ds_hs_cfg hscfg;

        hscfg.conditions = HOST_SLEEP_CFG_CANCEL;
        hscfg.is_invoke_hostcmd = true;

        return mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
                                    cmd_type, &hscfg);
}
EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);

/*
 * Sends IOCTL request to cancel the existing Host Sleep configuration.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
{
        struct mwifiex_ds_hs_cfg hscfg;

        if (adapter->hs_activated) {
                dev_dbg(adapter->dev, "cmd: HS Already actived\n");
                return true;
        }

        adapter->hs_activate_wait_q_woken = false;

        memset(&hscfg, 0, sizeof(struct mwifiex_hs_config_param));
        hscfg.is_invoke_hostcmd = true;

        if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
                                                       MWIFIEX_BSS_ROLE_STA),
                                  HostCmd_ACT_GEN_SET, MWIFIEX_SYNC_CMD,
                                  &hscfg)) {
                dev_err(adapter->dev, "IOCTL request HS enable failed\n");
                return false;
        }

        wait_event_interruptible(adapter->hs_activate_wait_q,
                        adapter->hs_activate_wait_q_woken);

        return true;
}
EXPORT_SYMBOL_GPL(mwifiex_enable_hs);

/*
 * IOCTL request handler to get BSS information.
 *
 * This function collates the information from different driver structures
 * to send to the user.
 */
int mwifiex_get_bss_info(struct mwifiex_private *priv,
                         struct mwifiex_bss_info *info)
{
        struct mwifiex_adapter *adapter = priv->adapter;
        struct mwifiex_bssdescriptor *bss_desc;
        s32 tbl_idx;

        if (!info)
                return -1;

        bss_desc = &priv->curr_bss_params.bss_descriptor;

        info->bss_mode = priv->bss_mode;

        memcpy(&info->ssid, &bss_desc->ssid,
               sizeof(struct mwifiex_802_11_ssid));

        memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);

        info->bss_chan = bss_desc->channel;

        info->region_code = adapter->region_code;

        /* Scan table index if connected */
        info->scan_table_idx = 0;
        if (priv->media_connected) {
                tbl_idx =
                        mwifiex_find_ssid_in_list(priv, &bss_desc->ssid,
                                                  bss_desc->mac_address,
                                                  priv->bss_mode);
                if (tbl_idx >= 0)
                        info->scan_table_idx = tbl_idx;
        }

        info->media_connected = priv->media_connected;

        info->max_power_level = priv->max_tx_power_level;
        info->min_power_level = priv->min_tx_power_level;

        info->adhoc_state = priv->adhoc_state;

        info->bcn_nf_last = priv->bcn_nf_last;

        if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
                info->wep_status = true;
        else
                info->wep_status = false;

        info->is_hs_configured = adapter->is_hs_configured;
        info->is_deep_sleep = adapter->is_deep_sleep;

        return 0;
}

/*
 * The function sets band configurations.
 *
 * it performs extra checks to make sure the Ad-Hoc
 * band and channel are compatible. Otherwise it returns an error.
 *
 */
int mwifiex_set_radio_band_cfg(struct mwifiex_private *priv,
                               struct mwifiex_ds_band_cfg *radio_cfg)
{
        struct mwifiex_adapter *adapter = priv->adapter;
        u8 infra_band, adhoc_band;
        u32 adhoc_channel;

        infra_band = (u8) radio_cfg->config_bands;
        adhoc_band = (u8) radio_cfg->adhoc_start_band;
        adhoc_channel = radio_cfg->adhoc_channel;

        /* SET Infra band */
        if ((infra_band | adapter->fw_bands) & ~adapter->fw_bands)
                return -1;

        adapter->config_bands = infra_band;

        /* SET Ad-hoc Band */
        if ((adhoc_band | adapter->fw_bands) & ~adapter->fw_bands)
                return -1;

        if (adhoc_band)
                adapter->adhoc_start_band = adhoc_band;
        adapter->chan_offset = (u8) radio_cfg->sec_chan_offset;
        /*
         * If no adhoc_channel is supplied verify if the existing adhoc
         * channel compiles with new adhoc_band
         */
        if (!adhoc_channel) {
                if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
                     (priv, adapter->adhoc_start_band,
                     priv->adhoc_channel)) {
                        /* Pass back the default channel */
                        radio_cfg->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
                        if ((adapter->adhoc_start_band & BAND_A)
                            || (adapter->adhoc_start_band & BAND_AN))
                                radio_cfg->adhoc_channel =
                                        DEFAULT_AD_HOC_CHANNEL_A;
                }
        } else {        /* Retrurn error if adhoc_band and
                           adhoc_channel combination is invalid */
                if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
                    (priv, adapter->adhoc_start_band, (u16) adhoc_channel))
                        return -1;
                priv->adhoc_channel = (u8) adhoc_channel;
        }
        if ((adhoc_band & BAND_GN) || (adhoc_band & BAND_AN))
                adapter->adhoc_11n_enabled = true;
        else
                adapter->adhoc_11n_enabled = false;

        return 0;
}

/*
 * IOCTL request handler to set/get active channel.
 *
 * This function performs validity checking on channel/frequency
 * compatibility and returns failure if not valid.
 */
int mwifiex_bss_set_channel(struct mwifiex_private *priv,
                            struct mwifiex_chan_freq_power *chan)
{
        struct mwifiex_adapter *adapter = priv->adapter;
        struct mwifiex_chan_freq_power *cfp = NULL;

        if (!chan)
                return -1;

        if (!chan->channel && !chan->freq)
                return -1;
        if (adapter->adhoc_start_band & BAND_AN)
                adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN;
        else if (adapter->adhoc_start_band & BAND_A)
                adapter->adhoc_start_band = BAND_G | BAND_B;
        if (chan->channel) {
                if (chan->channel <= MAX_CHANNEL_BAND_BG)
                        cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211
                                        (priv, 0, (u16) chan->channel);
                if (!cfp) {
                        cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211
                                        (priv, BAND_A, (u16) chan->channel);
                        if (cfp) {
                                if (adapter->adhoc_11n_enabled)
                                        adapter->adhoc_start_band = BAND_A
                                                | BAND_AN;
                                else
                                        adapter->adhoc_start_band = BAND_A;
                        }
                }
        } else {
                if (chan->freq <= MAX_FREQUENCY_BAND_BG)
                        cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211(
                                                        priv, 0, chan->freq);
                if (!cfp) {
                        cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211
                                                  (priv, BAND_A, chan->freq);
                        if (cfp) {
                                if (adapter->adhoc_11n_enabled)
                                        adapter->adhoc_start_band = BAND_A
                                                | BAND_AN;
                                else
                                        adapter->adhoc_start_band = BAND_A;
                        }
                }
        }
        if (!cfp || !cfp->channel) {
                dev_err(adapter->dev, "invalid channel/freq\n");
                return -1;
        }
        priv->adhoc_channel = (u8) cfp->channel;
        chan->channel = cfp->channel;
        chan->freq = cfp->freq;

        return 0;
}

/*
 * IOCTL request handler to set/get Ad-Hoc channel.
 *
 * This function prepares the correct firmware command and
 * issues it to set or get the ad-hoc channel.
 */
static int mwifiex_bss_ioctl_ibss_channel(struct mwifiex_private *priv,
                                          u16 action, u16 *channel)
{
        if (action == HostCmd_ACT_GEN_GET) {
                if (!priv->media_connected) {
                        *channel = priv->adhoc_channel;
                        return 0;
                }
        } else {
                priv->adhoc_channel = (u8) *channel;
        }

        return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_RF_CHANNEL,
                                    action, 0, channel);
}

/*
 * IOCTL request handler to find a particular BSS.
 *
 * The BSS can be searched with either a BSSID or a SSID. If none of
 * these are provided, just the best BSS (best RSSI) is returned.
 */
int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *priv,
                               struct mwifiex_ssid_bssid *ssid_bssid)
{
        struct mwifiex_adapter *adapter = priv->adapter;
        struct mwifiex_bssdescriptor *bss_desc;
        u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
        u8 mac[ETH_ALEN];
        int i = 0;

        if (memcmp(ssid_bssid->bssid, zero_mac, sizeof(zero_mac))) {
                i = mwifiex_find_bssid_in_list(priv,
                                               (u8 *) ssid_bssid->bssid,
                                               priv->bss_mode);
                if (i < 0) {
                        memcpy(mac, ssid_bssid->bssid, sizeof(mac));
                        dev_err(adapter->dev, "cannot find bssid %pM\n", mac);
                        return -1;
                }
                bss_desc = &adapter->scan_table[i];
                memcpy(&ssid_bssid->ssid, &bss_desc->ssid,
                                sizeof(struct mwifiex_802_11_ssid));
        } else if (ssid_bssid->ssid.ssid_len) {
                i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid, NULL,
                                              priv->bss_mode);
                if (i < 0) {
                        dev_err(adapter->dev, "cannot find ssid %s\n",
                                        ssid_bssid->ssid.ssid);
                        return -1;
                }
                bss_desc = &adapter->scan_table[i];
                memcpy(ssid_bssid->bssid, bss_desc->mac_address, ETH_ALEN);
        } else {
                return mwifiex_find_best_network(priv, ssid_bssid);
        }

        return 0;
}

/*
 * IOCTL request handler to change Ad-Hoc channel.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 *
 * The function follows the following steps to perform the change -
 *      - Get current IBSS information
 *      - Get current channel
 *      - If no change is required, return
 *      - If not connected, change channel and return
 *      - If connected,
 *          - Disconnect
 *          - Change channel
 *          - Perform specific SSID scan with same SSID
 *          - Start/Join the IBSS
 */
int
mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel)
{
        int ret;
        struct mwifiex_bss_info bss_info;
        struct mwifiex_ssid_bssid ssid_bssid;
        u16 curr_chan = 0;

        memset(&bss_info, 0, sizeof(bss_info));

        /* Get BSS information */
        if (mwifiex_get_bss_info(priv, &bss_info))
                return -1;

        /* Get current channel */
        ret = mwifiex_bss_ioctl_ibss_channel(priv, HostCmd_ACT_GEN_GET,
                                             &curr_chan);

        if (curr_chan == channel) {
                ret = 0;
                goto done;
        }
        dev_dbg(priv->adapter->dev, "cmd: updating channel from %d to %d\n",
                        curr_chan, channel);

        if (!bss_info.media_connected) {
                ret = 0;
                goto done;
        }

        /* Do disonnect */
        memset(&ssid_bssid, 0, ETH_ALEN);
        ret = mwifiex_deauthenticate(priv, ssid_bssid.bssid);

        ret = mwifiex_bss_ioctl_ibss_channel(priv, HostCmd_ACT_GEN_SET,
                                             (u16 *) &channel);

        /* Do specific SSID scanning */
        if (mwifiex_request_scan(priv, &bss_info.ssid)) {
                ret = -1;
                goto done;
        }
        /* Start/Join Adhoc network */
        memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));
        memcpy(&ssid_bssid.ssid, &bss_info.ssid,
               sizeof(struct mwifiex_802_11_ssid));

        ret = mwifiex_bss_start(priv, &ssid_bssid);
done:
        return ret;
}

/*
 * IOCTL request handler to get rate.
 *
 * This function prepares the correct firmware command and
 * issues it to get the current rate if it is connected,
 * otherwise, the function returns the lowest supported rate
 * for the band.
 */
static int mwifiex_rate_ioctl_get_rate_value(struct mwifiex_private *priv,
                                             struct mwifiex_rate_cfg *rate_cfg)
{
        struct mwifiex_adapter *adapter = priv->adapter;

        rate_cfg->is_rate_auto = priv->is_data_rate_auto;
        if (!priv->media_connected) {
                switch (adapter->config_bands) {
                case BAND_B:
                        /* Return the lowest supported rate for B band */
                        rate_cfg->rate = supported_rates_b[0] & 0x7f;
                        break;
                case BAND_G:
                case BAND_G | BAND_GN:
                        /* Return the lowest supported rate for G band */
                        rate_cfg->rate = supported_rates_g[0] & 0x7f;
                        break;
                case BAND_B | BAND_G:
                case BAND_A | BAND_B | BAND_G:
                case BAND_A | BAND_B:
                case BAND_A | BAND_B | BAND_G | BAND_AN | BAND_GN:
                case BAND_B | BAND_G | BAND_GN:
                        /* Return the lowest supported rate for BG band */
                        rate_cfg->rate = supported_rates_bg[0] & 0x7f;
                        break;
                case BAND_A:
                case BAND_A | BAND_G:
                case BAND_A | BAND_G | BAND_AN | BAND_GN:
                case BAND_A | BAND_AN:
                        /* Return the lowest supported rate for A band */
                        rate_cfg->rate = supported_rates_a[0] & 0x7f;
                        break;
                case BAND_GN:
                        /* Return the lowest supported rate for N band */
                        rate_cfg->rate = supported_rates_n[0] & 0x7f;
                        break;
                default:
                        dev_warn(adapter->dev, "invalid band %#x\n",
                               adapter->config_bands);
                        break;
                }
        } else {
                return mwifiex_send_cmd_sync(priv,
                                            HostCmd_CMD_802_11_TX_RATE_QUERY,
                                            HostCmd_ACT_GEN_GET, 0, NULL);
        }

        return 0;
}

/*
 * IOCTL request handler to set rate.
 *
 * This function prepares the correct firmware command and
 * issues it to set the current rate.
 *
 * The function also performs validation checking on the supplied value.
 */
static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
                                             struct mwifiex_rate_cfg *rate_cfg)
{
        u8 rates[MWIFIEX_SUPPORTED_RATES];
        u8 *rate;
        int rate_index, ret;
        u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
        u32 i;
        struct mwifiex_adapter *adapter = priv->adapter;

        if (rate_cfg->is_rate_auto) {
                memset(bitmap_rates, 0, sizeof(bitmap_rates));
                /* Support all HR/DSSS rates */
                bitmap_rates[0] = 0x000F;
                /* Support all OFDM rates */
                bitmap_rates[1] = 0x00FF;
                /* Support all HT-MCSs rate */
                for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates) - 3; i++)
                        bitmap_rates[i + 2] = 0xFFFF;
                bitmap_rates[9] = 0x3FFF;
        } else {
                memset(rates, 0, sizeof(rates));
                mwifiex_get_active_data_rates(priv, rates);
                rate = rates;
                for (i = 0; (rate[i] && i < MWIFIEX_SUPPORTED_RATES); i++) {
                        dev_dbg(adapter->dev, "info: rate=%#x wanted=%#x\n",
                                rate[i], rate_cfg->rate);
                        if ((rate[i] & 0x7f) == (rate_cfg->rate & 0x7f))
                                break;
                }
                if (!rate[i] || (i == MWIFIEX_SUPPORTED_RATES)) {
                        dev_err(adapter->dev, "fixed data rate %#x is out "
                               "of range\n", rate_cfg->rate);
                        return -1;
                }
                memset(bitmap_rates, 0, sizeof(bitmap_rates));

                rate_index = mwifiex_data_rate_to_index(rate_cfg->rate);

                /* Only allow b/g rates to be set */
                if (rate_index >= MWIFIEX_RATE_INDEX_HRDSSS0 &&
                    rate_index <= MWIFIEX_RATE_INDEX_HRDSSS3) {
                        bitmap_rates[0] = 1 << rate_index;
                } else {
                        rate_index -= 1; /* There is a 0x00 in the table */
                        if (rate_index >= MWIFIEX_RATE_INDEX_OFDM0 &&
                            rate_index <= MWIFIEX_RATE_INDEX_OFDM7)
                                bitmap_rates[1] = 1 << (rate_index -
                                                   MWIFIEX_RATE_INDEX_OFDM0);
                }
        }

        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TX_RATE_CFG,
                                    HostCmd_ACT_GEN_SET, 0, bitmap_rates);

        return ret;
}

/*
 * IOCTL request handler to set/get rate.
 *
 * This function can be used to set/get either the rate value or the
 * rate index.
 */
static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
                                  struct mwifiex_rate_cfg *rate_cfg)
{
        int status;

        if (!rate_cfg)
                return -1;

        if (rate_cfg->action == HostCmd_ACT_GEN_GET)
                status = mwifiex_rate_ioctl_get_rate_value(priv, rate_cfg);
        else
                status = mwifiex_rate_ioctl_set_rate_value(priv, rate_cfg);

        return status;
}

/*
 * Sends IOCTL request to get the data rate.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
                              struct mwifiex_rate_cfg *rate)
{
        int ret;

        memset(rate, 0, sizeof(struct mwifiex_rate_cfg));
        rate->action = HostCmd_ACT_GEN_GET;
        ret = mwifiex_rate_ioctl_cfg(priv, rate);

        if (!ret) {
                if (rate && rate->is_rate_auto)
                        rate->rate = mwifiex_index_to_data_rate(priv->tx_rate,
                                                        priv->tx_htinfo);
                else if (rate)
                        rate->rate = priv->data_rate;
        } else {
                ret = -1;
        }

        return ret;
}

/*
 * IOCTL request handler to set tx power configuration.
 *
 * This function prepares the correct firmware command and
 * issues it.
 *
 * For non-auto power mode, all the following power groups are set -
 *      - Modulation class HR/DSSS
 *      - Modulation class OFDM
 *      - Modulation class HTBW20
 *      - Modulation class HTBW40
 */
int mwifiex_set_tx_power(struct mwifiex_private *priv,
                         struct mwifiex_power_cfg *power_cfg)
{
        int ret;
        struct host_cmd_ds_txpwr_cfg *txp_cfg;
        struct mwifiex_types_power_group *pg_tlv;
        struct mwifiex_power_group *pg;
        u8 *buf;
        u16 dbm = 0;

        if (!power_cfg->is_power_auto) {
                dbm = (u16) power_cfg->power_level;
                if ((dbm < priv->min_tx_power_level) ||
                    (dbm > priv->max_tx_power_level)) {
                        dev_err(priv->adapter->dev, "txpower value %d dBm"
                                        " is out of range (%d dBm-%d dBm)\n",
                                        dbm, priv->min_tx_power_level,
                                        priv->max_tx_power_level);
                        return -1;
                }
        }
        buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
        if (!buf) {
                dev_err(priv->adapter->dev, "%s: failed to alloc cmd buffer\n",
                                __func__);
                return -ENOMEM;
        }

        txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
        txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
        if (!power_cfg->is_power_auto) {
                txp_cfg->mode = cpu_to_le32(1);
                pg_tlv = (struct mwifiex_types_power_group *) (buf +
                                sizeof(struct host_cmd_ds_txpwr_cfg));
                pg_tlv->type = TLV_TYPE_POWER_GROUP;
                pg_tlv->length = 4 * sizeof(struct mwifiex_power_group);
                pg = (struct mwifiex_power_group *) (buf +
                                sizeof(struct host_cmd_ds_txpwr_cfg) +
                                sizeof(struct mwifiex_types_power_group));
                /* Power group for modulation class HR/DSSS */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x03;
                pg->modulation_class = MOD_CLASS_HR_DSSS;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg++;
                /* Power group for modulation class OFDM */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x07;
                pg->modulation_class = MOD_CLASS_OFDM;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg++;
                /* Power group for modulation class HTBW20 */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x20;
                pg->modulation_class = MOD_CLASS_HT;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg->ht_bandwidth = HT_BW_20;
                pg++;
                /* Power group for modulation class HTBW40 */
                pg->first_rate_code = 0x00;
                pg->last_rate_code = 0x20;
                pg->modulation_class = MOD_CLASS_HT;
                pg->power_step = 0;
                pg->power_min = (s8) dbm;
                pg->power_max = (s8) dbm;
                pg->ht_bandwidth = HT_BW_40;
        }
        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_TXPWR_CFG,
                                    HostCmd_ACT_GEN_SET, 0, buf);

        kfree(buf);
        return ret;
}

/*
 * IOCTL request handler to get power save mode.
 *
 * This function prepares the correct firmware command and
 * issues it.
 */
int mwifiex_drv_set_power(struct mwifiex_private *priv, u32 *ps_mode)
{
        int ret;
        struct mwifiex_adapter *adapter = priv->adapter;
        u16 sub_cmd;

        if (*ps_mode)
                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
        else
                adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
        sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
                                    sub_cmd, BITMAP_STA_PS, NULL);
        if ((!ret) && (sub_cmd == DIS_AUTO_PS))
                ret = mwifiex_send_cmd_async(priv,
                                HostCmd_CMD_802_11_PS_MODE_ENH, GET_PS,
                                0, NULL);

        return ret;
}

/*
 * IOCTL request handler to set/reset WPA IE.
 *
 * The supplied WPA IE is treated as a opaque buffer. Only the first field
 * is checked to determine WPA version. If buffer length is zero, the existing
 * WPA IE is reset.
 */
static int mwifiex_set_wpa_ie_helper(struct mwifiex_private *priv,
                                     u8 *ie_data_ptr, u16 ie_len)
{
        if (ie_len) {
                if (ie_len > sizeof(priv->wpa_ie)) {
                        dev_err(priv->adapter->dev,
                                "failed to copy WPA IE, too big\n");
                        return -1;
                }
                memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
                priv->wpa_ie_len = (u8) ie_len;
                dev_dbg(priv->adapter->dev, "cmd: Set Wpa_ie_len=%d IE=%#x\n",
                                priv->wpa_ie_len, priv->wpa_ie[0]);

                if (priv->wpa_ie[0] == WLAN_EID_WPA) {
                        priv->sec_info.wpa_enabled = true;
                } else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
                        priv->sec_info.wpa2_enabled = true;
                } else {
                        priv->sec_info.wpa_enabled = false;
                        priv->sec_info.wpa2_enabled = false;
                }
        } else {
                memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
                priv->wpa_ie_len = 0;
                dev_dbg(priv->adapter->dev, "info: reset wpa_ie_len=%d IE=%#x\n",
                        priv->wpa_ie_len, priv->wpa_ie[0]);
                priv->sec_info.wpa_enabled = false;
                priv->sec_info.wpa2_enabled = false;
        }

        return 0;
}

/*
 * IOCTL request handler to set/reset WAPI IE.
 *
 * The supplied WAPI IE is treated as a opaque buffer. Only the first field
 * is checked to internally enable WAPI. If buffer length is zero, the existing
 * WAPI IE is reset.
 */
static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
                               u8 *ie_data_ptr, u16 ie_len)
{
        if (ie_len) {
                if (ie_len > sizeof(priv->wapi_ie)) {
                        dev_dbg(priv->adapter->dev,
                                "info: failed to copy WAPI IE, too big\n");
                        return -1;
                }
                memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
                priv->wapi_ie_len = ie_len;
                dev_dbg(priv->adapter->dev, "cmd: Set wapi_ie_len=%d IE=%#x\n",
                                priv->wapi_ie_len, priv->wapi_ie[0]);

                if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
                        priv->sec_info.wapi_enabled = true;
        } else {
                memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
                priv->wapi_ie_len = ie_len;
                dev_dbg(priv->adapter->dev,
                        "info: Reset wapi_ie_len=%d IE=%#x\n",
                       priv->wapi_ie_len, priv->wapi_ie[0]);
                priv->sec_info.wapi_enabled = false;
        }
        return 0;
}

/*
 * IOCTL request handler to set WAPI key.
 *
 * This function prepares the correct firmware command and
 * issues it.
 */
static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_private *priv,
                               struct mwifiex_ds_encrypt_key *encrypt_key)
{

        return mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
                                    HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
                                    encrypt_key);
}

/*
 * IOCTL request handler to set WEP network key.
 *
 * This function prepares the correct firmware command and
 * issues it, after validation checks.
 */
static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_private *priv,
                              struct mwifiex_ds_encrypt_key *encrypt_key)
{
        int ret;
        struct mwifiex_wep_key *wep_key;
        int index;

        if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
                priv->wep_key_curr_index = 0;
        wep_key = &priv->wep_key[priv->wep_key_curr_index];
        index = encrypt_key->key_index;
        if (encrypt_key->key_disable) {
                priv->sec_info.wep_status = MWIFIEX_802_11_WEP_DISABLED;
        } else if (!encrypt_key->key_len) {
                /* Copy the required key as the current key */
                wep_key = &priv->wep_key[index];
                if (!wep_key->key_length) {
                        dev_err(priv->adapter->dev,
                                "key not set, so cannot enable it\n");
                        return -1;
                }
                priv->wep_key_curr_index = (u16) index;
                priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED;
        } else {
                wep_key = &priv->wep_key[index];
                memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
                /* Copy the key in the driver */
                memcpy(wep_key->key_material,
                       encrypt_key->key_material,
                       encrypt_key->key_len);
                wep_key->key_index = index;
                wep_key->key_length = encrypt_key->key_len;
                priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED;
        }
        if (wep_key->key_length) {
                /* Send request to firmware */
                ret = mwifiex_send_cmd_async(priv,
                                             HostCmd_CMD_802_11_KEY_MATERIAL,
                                             HostCmd_ACT_GEN_SET, 0, NULL);
                if (ret)
                        return ret;
        }
        if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
                priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
        else
                priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;

        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_MAC_CONTROL,
                                    HostCmd_ACT_GEN_SET, 0,
                                    &priv->curr_pkt_filter);

        return ret;
}

/*
 * IOCTL request handler to set WPA key.
 *
 * This function prepares the correct firmware command and
 * issues it, after validation checks.
 *
 * Current driver only supports key length of up to 32 bytes.
 *
 * This function can also be used to disable a currently set key.
 */
static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_private *priv,
                              struct mwifiex_ds_encrypt_key *encrypt_key)
{
        int ret;
        u8 remove_key = false;
        struct host_cmd_ds_802_11_key_material *ibss_key;

        /* Current driver only supports key length of up to 32 bytes */
        if (encrypt_key->key_len > WLAN_MAX_KEY_LEN) {
                dev_err(priv->adapter->dev, "key length too long\n");
                return -1;
        }

        if (priv->bss_mode == NL80211_IFTYPE_ADHOC) {
                /*
                 * IBSS/WPA-None uses only one key (Group) for both receiving
                 * and sending unicast and multicast packets.
                 */
                /* Send the key as PTK to firmware */
                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
                ret = mwifiex_send_cmd_async(priv,
                                        HostCmd_CMD_802_11_KEY_MATERIAL,
                                        HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
                                        encrypt_key);
                if (ret)
                        return ret;

                ibss_key = &priv->aes_key;
                memset(ibss_key, 0,
                       sizeof(struct host_cmd_ds_802_11_key_material));
                /* Copy the key in the driver */
                memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
                       encrypt_key->key_len);
                memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
                       sizeof(ibss_key->key_param_set.key_len));
                ibss_key->key_param_set.key_type_id
                        = cpu_to_le16(KEY_TYPE_ID_TKIP);
                ibss_key->key_param_set.key_info = cpu_to_le16(KEY_ENABLED);

                /* Send the key as GTK to firmware */
                encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
        }

        if (!encrypt_key->key_index)
                encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;

        if (remove_key)
                ret = mwifiex_send_cmd_sync(priv,
                                       HostCmd_CMD_802_11_KEY_MATERIAL,
                                       HostCmd_ACT_GEN_SET, !(KEY_INFO_ENABLED),
                                       encrypt_key);
        else
                ret = mwifiex_send_cmd_sync(priv,
                                        HostCmd_CMD_802_11_KEY_MATERIAL,
                                        HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
                                        encrypt_key);

        return ret;
}

/*
 * IOCTL request handler to set/get network keys.
 *
 * This is a generic key handling function which supports WEP, WPA
 * and WAPI.
 */
static int
mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
                              struct mwifiex_ds_encrypt_key *encrypt_key)
{
        int status;

        if (encrypt_key->is_wapi_key)
                status = mwifiex_sec_ioctl_set_wapi_key(priv, encrypt_key);
        else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
                status = mwifiex_sec_ioctl_set_wpa_key(priv, encrypt_key);
        else
                status = mwifiex_sec_ioctl_set_wep_key(priv, encrypt_key);
        return status;
}

/*
 * This function returns the driver version.
 */
int
mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
                               int max_len)
{
        union {
                u32 l;
                u8 c[4];
        } ver;
        char fw_ver[32];

        ver.l = adapter->fw_release_number;
        sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);

        snprintf(version, max_len, driver_version, fw_ver);

        dev_dbg(adapter->dev, "info: MWIFIEX VERSION: %s\n", version);

        return 0;
}

/*
 * Sends IOCTL request to get signal information.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_get_signal_info(struct mwifiex_private *priv,
                            struct mwifiex_ds_get_signal *signal)
{
        int status;

        signal->selector = ALL_RSSI_INFO_MASK;

        /* Signal info can be obtained only if connected */
        if (!priv->media_connected) {
                dev_dbg(priv->adapter->dev,
                        "info: Can not get signal in disconnected state\n");
                return -1;
        }

        status = mwifiex_send_cmd_sync(priv, HostCmd_CMD_RSSI_INFO,
                                       HostCmd_ACT_GEN_GET, 0, signal);

        if (!status) {
                if (signal->selector & BCN_RSSI_AVG_MASK)
                        priv->w_stats.qual.level = signal->bcn_rssi_avg;
                if (signal->selector & BCN_NF_AVG_MASK)
                        priv->w_stats.qual.noise = signal->bcn_nf_avg;
        }

        return status;
}

/*
 * Sends IOCTL request to set encoding parameters.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int mwifiex_set_encode(struct mwifiex_private *priv, const u8 *key,
                        int key_len, u8 key_index, int disable)
{
        struct mwifiex_ds_encrypt_key encrypt_key;

        memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key));
        encrypt_key.key_len = key_len;
        if (!disable) {
                encrypt_key.key_index = key_index;
                if (key_len)
                        memcpy(encrypt_key.key_material, key, key_len);
        } else {
                encrypt_key.key_disable = true;
        }

        return mwifiex_sec_ioctl_encrypt_key(priv, &encrypt_key);
}

/*
 * Sends IOCTL request to get extended version.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_get_ver_ext(struct mwifiex_private *priv)
{
        struct mwifiex_ver_ext ver_ext;

        memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext));
        if (mwifiex_send_cmd_sync(priv, HostCmd_CMD_VERSION_EXT,
                                    HostCmd_ACT_GEN_GET, 0, &ver_ext))
                return -1;

        return 0;
}

/*
 * Sends IOCTL request to get statistics information.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_get_stats_info(struct mwifiex_private *priv,
                       struct mwifiex_ds_get_stats *log)
{
        int ret;

        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_GET_LOG,
                                    HostCmd_ACT_GEN_GET, 0, log);

        if (!ret) {
                priv->w_stats.discard.fragment = log->fcs_error;
                priv->w_stats.discard.retries = log->retry;
                priv->w_stats.discard.misc = log->ack_failure;
        }

        return ret;
}

/*
 * IOCTL request handler to read/write register.
 *
 * This function prepares the correct firmware command and
 * issues it.
 *
 * Access to the following registers are supported -
 *      - MAC
 *      - BBP
 *      - RF
 *      - PMIC
 *      - CAU
 */
static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
                                        struct mwifiex_ds_reg_rw *reg_rw,
                                        u16 action)
{
        u16 cmd_no;

        switch (le32_to_cpu(reg_rw->type)) {
        case MWIFIEX_REG_MAC:
                cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
                break;
        case MWIFIEX_REG_BBP:
                cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
                break;
        case MWIFIEX_REG_RF:
                cmd_no = HostCmd_CMD_RF_REG_ACCESS;
                break;
        case MWIFIEX_REG_PMIC:
                cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
                break;
        case MWIFIEX_REG_CAU:
                cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
                break;
        default:
                return -1;
        }

        return mwifiex_send_cmd_sync(priv, cmd_no, action, 0, reg_rw);

}

/*
 * Sends IOCTL request to write to a register.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
                  u32 reg_offset, u32 reg_value)
{
        struct mwifiex_ds_reg_rw reg_rw;

        reg_rw.type = cpu_to_le32(reg_type);
        reg_rw.offset = cpu_to_le32(reg_offset);
        reg_rw.value = cpu_to_le32(reg_value);

        return mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_SET);
}

/*
 * Sends IOCTL request to read from a register.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
                 u32 reg_offset, u32 *value)
{
        int ret;
        struct mwifiex_ds_reg_rw reg_rw;

        reg_rw.type = cpu_to_le32(reg_type);
        reg_rw.offset = cpu_to_le32(reg_offset);
        ret = mwifiex_reg_mem_ioctl_reg_rw(priv, &reg_rw, HostCmd_ACT_GEN_GET);

        if (ret)
                goto done;

        *value = le32_to_cpu(reg_rw.value);

done:
        return ret;
}

/*
 * Sends IOCTL request to read from EEPROM.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
                    u8 *value)
{
        int ret;
        struct mwifiex_ds_read_eeprom rd_eeprom;

        rd_eeprom.offset = cpu_to_le16((u16) offset);
        rd_eeprom.byte_count = cpu_to_le16((u16) bytes);

        /* Send request to firmware */
        ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
                                    HostCmd_ACT_GEN_GET, 0, &rd_eeprom);

        if (!ret)
                memcpy(value, rd_eeprom.value, MAX_EEPROM_DATA);
        return ret;
}

/*
 * This function sets a generic IE. In addition to generic IE, it can
 * also handle WPA, WPA2 and WAPI IEs.
 */
static int
mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
                          u16 ie_len)
{
        int ret = 0;
        struct ieee_types_vendor_header *pvendor_ie;
        const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
        const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };

        /* If the passed length is zero, reset the buffer */
        if (!ie_len) {
                priv->gen_ie_buf_len = 0;
                priv->wps.session_enable = false;

                return 0;
        } else if (!ie_data_ptr) {
                return -1;
        }
        pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
        /* Test to see if it is a WPA IE, if not, then it is a gen IE */
        if (((pvendor_ie->element_id == WLAN_EID_WPA)
             && (!memcmp(pvendor_ie->oui, wpa_oui, sizeof(wpa_oui))))
                        || (pvendor_ie->element_id == WLAN_EID_RSN)) {

                /* IE is a WPA/WPA2 IE so call set_wpa function */
                ret = mwifiex_set_wpa_ie_helper(priv, ie_data_ptr, ie_len);
                priv->wps.session_enable = false;

                return ret;
        } else if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
                /* IE is a WAPI IE so call set_wapi function */
                ret = mwifiex_set_wapi_ie(priv, ie_data_ptr, ie_len);

                return ret;
        }
        /*
         * Verify that the passed length is not larger than the
         * available space remaining in the buffer
         */
        if (ie_len < (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {

                /* Test to see if it is a WPS IE, if so, enable
                 * wps session flag
                 */
                pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
                if ((pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC)
                                && (!memcmp(pvendor_ie->oui, wps_oui,
                                                sizeof(wps_oui)))) {
                        priv->wps.session_enable = true;
                        dev_dbg(priv->adapter->dev,
                                "info: WPS Session Enabled.\n");
                }

                /* Append the passed data to the end of the
                   genIeBuffer */
                memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len, ie_data_ptr,
                                                                        ie_len);
                /* Increment the stored buffer length by the
                   size passed */
                priv->gen_ie_buf_len += ie_len;
        } else {
                /* Passed data does not fit in the remaining
                   buffer space */
                ret = -1;
        }

        /* Return 0, or -1 for error case */
        return ret;
}

/*
 * IOCTL request handler to set/get generic IE.
 *
 * In addition to various generic IEs, this function can also be
 * used to set the ARP filter.
 */
static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
                                     struct mwifiex_ds_misc_gen_ie *gen_ie,
                                     u16 action)
{
        struct mwifiex_adapter *adapter = priv->adapter;

        switch (gen_ie->type) {
        case MWIFIEX_IE_TYPE_GEN_IE:
                if (action == HostCmd_ACT_GEN_GET) {
                        gen_ie->len = priv->wpa_ie_len;
                        memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
                } else {
                        mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
                                                  (u16) gen_ie->len);
                }
                break;
        case MWIFIEX_IE_TYPE_ARP_FILTER:
                memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
                if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
                        adapter->arp_filter_size = 0;
                        dev_err(adapter->dev, "invalid ARP filter size\n");
                        return -1;
                } else {
                        memcpy(adapter->arp_filter, gen_ie->ie_data,
                                                                gen_ie->len);
                        adapter->arp_filter_size = gen_ie->len;
                }
                break;
        default:
                dev_err(adapter->dev, "invalid IE type\n");
                return -1;
        }
        return 0;
}

/*
 * Sends IOCTL request to set a generic IE.
 *
 * This function allocates the IOCTL request buffer, fills it
 * with requisite parameters and calls the IOCTL handler.
 */
int
mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len)
{
        struct mwifiex_ds_misc_gen_ie gen_ie;

        if (ie_len > IW_CUSTOM_MAX)
                return -EFAULT;

        gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
        gen_ie.len = ie_len;
        memcpy(gen_ie.ie_data, ie, ie_len);
        if (mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET))
                return -EFAULT;

        return 0;
}