/*
 * iop13xx PCI support
 * Copyright (c) 2005-2006, Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
 * Place - Suite 330, Boston, MA 02111-1307 USA.
 *
 */

#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
#include <asm/signal.h>
#include <asm/mach/pci.h>
#include <mach/pci.h>

#define IOP13XX_PCI_DEBUG 0
#define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))

u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
static struct pci_bus *pci_bus_atux = 0;
static struct pci_bus *pci_bus_atue = 0;
u32 iop13xx_atue_mem_base;
u32 iop13xx_atux_mem_base;
size_t iop13xx_atue_mem_size;
size_t iop13xx_atux_mem_size;

EXPORT_SYMBOL(iop13xx_atue_mem_base);
EXPORT_SYMBOL(iop13xx_atux_mem_base);
EXPORT_SYMBOL(iop13xx_atue_mem_size);
EXPORT_SYMBOL(iop13xx_atux_mem_size);

int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
                                                 access */

/* Scan the initialized busses and ioremap the requested memory range
 */
void iop13xx_map_pci_memory(void)
{
        int atu;
        struct pci_bus *bus;
        struct pci_dev *dev;
        resource_size_t end = 0;

        for (atu = 0; atu < 2; atu++) {
                bus = atu ? pci_bus_atue : pci_bus_atux;
                if (bus) {
                        list_for_each_entry(dev, &bus->devices, bus_list) {
                                int i;
                                int max = 7;

                                if (dev->subordinate)
                                        max = DEVICE_COUNT_RESOURCE;

                                for (i = 0; i < max; i++) {
                                        struct resource *res = &dev->resource[i];
                                        if (res->flags & IORESOURCE_MEM)
                                                end = max(res->end, end);
                                }
                        }

                        switch(atu) {
                        case 0:
                                iop13xx_atux_mem_size =
                                        (end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;

                                /* 16MB align the request */
                                if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
                                        iop13xx_atux_mem_size &= ~(SZ_16M - 1);
                                        iop13xx_atux_mem_size += SZ_16M;
                                }

                                if (end) {
                                        iop13xx_atux_mem_base =
                                        (u32) __arm_ioremap_pfn(
                                        __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
                                        , 0, iop13xx_atux_mem_size, MT_DEVICE);
                                        if (!iop13xx_atux_mem_base) {
                                                printk("%s: atux allocation "
                                                       "failed\n", __func__);
                                                BUG();
                                        }
                                } else
                                        iop13xx_atux_mem_size = 0;
                                PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
                                __func__, atu, iop13xx_atux_mem_size,
                                iop13xx_atux_mem_base);
                                break;
                        case 1:
                                iop13xx_atue_mem_size =
                                        (end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;

                                /* 16MB align the request */
                                if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
                                        iop13xx_atue_mem_size &= ~(SZ_16M - 1);
                                        iop13xx_atue_mem_size += SZ_16M;
                                }

                                if (end) {
                                        iop13xx_atue_mem_base =
                                        (u32) __arm_ioremap_pfn(
                                        __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
                                        , 0, iop13xx_atue_mem_size, MT_DEVICE);
                                        if (!iop13xx_atue_mem_base) {
                                                printk("%s: atue allocation "
                                                       "failed\n", __func__);
                                                BUG();
                                        }
                                } else
                                        iop13xx_atue_mem_size = 0;
                                PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
                                __func__, atu, iop13xx_atue_mem_size,
                                iop13xx_atue_mem_base);
                                break;
                        }

                        printk("%s: Initialized (%uM @ resource/virtual: %08lx/%08x)\n",
                        atu ? "ATUE" : "ATUX",
                        (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
                        SZ_1M,
                        atu ? IOP13XX_PCIE_LOWER_MEM_RA :
                        IOP13XX_PCIX_LOWER_MEM_RA,
                        atu ? iop13xx_atue_mem_base :
                        iop13xx_atux_mem_base);
                        end = 0;
                }

        }
}

static int iop13xx_atu_function(int atu)
{
        int func = 0;
        /* the function number depends on the value of the
         * IOP13XX_INTERFACE_SEL_PCIX reset strap
         * see C-Spec section 3.17
         */
        switch(atu) {
        case IOP13XX_INIT_ATU_ATUX:
                if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
                        func = 5;
                else
                        func = 0;
                break;
        case IOP13XX_INIT_ATU_ATUE:
                if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
                        func = 0;
                else
                        func = 5;
                break;
        default:
                BUG();
        }

        return func;
}

/* iop13xx_atux_cfg_address - format a configuration address for atux
 * @bus: Target bus to access
 * @devfn: Combined device number and function number
 * @where: Desired register's address offset
 *
 * Convert the parameters to a configuration address formatted
 * according the PCI-X 2.0 specification
 */
static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
{
        struct pci_sys_data *sys = bus->sysdata;
        u32 addr;

        if (sys->busnr == bus->number)
                addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
        else
                addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;

        addr |= PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
        addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */

        return addr;
}

/* iop13xx_atue_cfg_address - format a configuration address for atue
 * @bus: Target bus to access
 * @devfn: Combined device number and function number
 * @where: Desired register's address offset
 *
 * Convert the parameters to an address usable by the ATUE_OCCAR
 */
static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
{
        struct pci_sys_data *sys = bus->sysdata;
        u32 addr;

        PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
                bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
        addr = ((u32) bus->number)     << IOP13XX_ATUE_OCCAR_BUS_NUM |
                   ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
                   ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
                   (where & ~0x3);

        if (sys->busnr != bus->number)
                addr |= 1; /* type 1 access */

        return addr;
}

/* This routine checks the status of the last configuration cycle.  If an error
 * was detected it returns >0, else it returns a 0.  The errors being checked
 * are parity, master abort, target abort (master and target).  These types of
 * errors occur during a config cycle where there is no device, like during
 * the discovery stage.
 */
static int iop13xx_atux_pci_status(int clear)
{
        unsigned int status;
        int err = 0;

        /*
         * Check the status registers.
         */
        status = __raw_readw(IOP13XX_ATUX_ATUSR);
        if (status & IOP_PCI_STATUS_ERROR)
        {
                PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
                if(clear)
                        __raw_writew(status & IOP_PCI_STATUS_ERROR,
                                IOP13XX_ATUX_ATUSR);
                err = 1;
        }
        status = __raw_readl(IOP13XX_ATUX_ATUISR);
        if (status & IOP13XX_ATUX_ATUISR_ERROR)
        {
                PRINTK("\t\t\tPCI error interrupt:  ATUISR %#08x", status);
                if(clear)
                        __raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
                                IOP13XX_ATUX_ATUISR);
                err = 1;
        }
        return err;
}

/* Simply write the address register and read the configuration
 * data.  Note that the data dependency on %0 encourages an abort
 * to be detected before we return.
 */
static u32 iop13xx_atux_read(unsigned long addr)
{
        u32 val;

        __asm__ __volatile__(
                "str    %1, [%2]\n\t"
                "ldr    %0, [%3]\n\t"
                "mov    %0, %0\n\t"
                : "=r" (val)
                : "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));

        return val;
}

/* The read routines must check the error status of the last configuration
 * cycle.  If there was an error, the routine returns all hex f's.
 */
static int
iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
                int size, u32 *value)
{
        unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
        u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);

        if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
                __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
                        IOP13XX_XBG_BECSR);
                val = 0xffffffff;
        }

        *value = val;

        return PCIBIOS_SUCCESSFUL;
}

static int
iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
                int size, u32 value)
{
        unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
        u32 val;

        if (size != 4) {
                val = iop13xx_atux_read(addr);
                if (!iop13xx_atux_pci_status(1) == 0)
                        return PCIBIOS_SUCCESSFUL;

                where = (where & 3) * 8;

                if (size == 1)
                        val &= ~(0xff << where);
                else
                        val &= ~(0xffff << where);

                __raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
        } else {
                __raw_writel(addr, IOP13XX_ATUX_OCCAR);
                __raw_writel(value, IOP13XX_ATUX_OCCDR);
        }

        return PCIBIOS_SUCCESSFUL;
}

static struct pci_ops iop13xx_atux_ops = {
        .read   = iop13xx_atux_read_config,
        .write  = iop13xx_atux_write_config,
};

/* This routine checks the status of the last configuration cycle.  If an error
 * was detected it returns >0, else it returns a 0.  The errors being checked
 * are parity, master abort, target abort (master and target).  These types of
 * errors occur during a config cycle where there is no device, like during
 * the discovery stage.
 */
static int iop13xx_atue_pci_status(int clear)
{
        unsigned int status;
        int err = 0;

        /*
         * Check the status registers.
         */

        /* standard pci status register */
        status = __raw_readw(IOP13XX_ATUE_ATUSR);
        if (status & IOP_PCI_STATUS_ERROR) {
                PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
                if(clear)
                        __raw_writew(status & IOP_PCI_STATUS_ERROR,
                                IOP13XX_ATUE_ATUSR);
                err++;
        }

        /* check the normal status bits in the ATUISR */
        status = __raw_readl(IOP13XX_ATUE_ATUISR);
        if (status & IOP13XX_ATUE_ATUISR_ERROR) {
                PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
                if (clear)
                        __raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
                                IOP13XX_ATUE_ATUISR);
                err++;

                /* check the PCI-E status if the ATUISR reports an interface error */
                if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
                        /* get the unmasked errors */
                        status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
                                        ~(__raw_readl(IOP13XX_ATUE_PIE_MSK));

                        if (status) {
                                PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
                                        __raw_readl(IOP13XX_ATUE_PIE_STS));
                                err++;
                        } else {
                                PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
                                        __raw_readl(IOP13XX_ATUE_PIE_STS));
                                PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
                                        __raw_readl(IOP13XX_ATUE_PIE_MSK));
                                BUG();
                        }

                        if(clear)
                                __raw_writel(status, IOP13XX_ATUE_PIE_STS);
                }
        }

        return err;
}

static int
iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
{
        WARN_ON(idsel != 0);

        switch (pin) {
        case 1: return ATUE_INTA;
        case 2: return ATUE_INTB;
        case 3: return ATUE_INTC;
        case 4: return ATUE_INTD;
        default: return -1;
        }
}

static u32 iop13xx_atue_read(unsigned long addr)
{
        u32 val;

        __raw_writel(addr, IOP13XX_ATUE_OCCAR);
        val = __raw_readl(IOP13XX_ATUE_OCCDR);

        rmb();

        return val;
}

/* The read routines must check the error status of the last configuration
 * cycle.  If there was an error, the routine returns all hex f's.
 */
static int
iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
                int size, u32 *value)
{
        u32 val;
        unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);

        /* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
        if (!PCI_SLOT(devfn) || (addr & 1)) {
                val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
                if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
                        __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
                                IOP13XX_XBG_BECSR);
                        val = 0xffffffff;
                }

                PRINTK("addr=%#0lx, val=%#010x", addr, val);
        } else
                val = 0xffffffff;

        *value = val;

        return PCIBIOS_SUCCESSFUL;
}

static int
iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
                int size, u32 value)
{
        unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
        u32 val;

        if (size != 4) {
                val = iop13xx_atue_read(addr);
                if (!iop13xx_atue_pci_status(1) == 0)
                        return PCIBIOS_SUCCESSFUL;

                where = (where & 3) * 8;

                if (size == 1)
                        val &= ~(0xff << where);
                else
                        val &= ~(0xffff << where);

                __raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
        } else {
                __raw_writel(addr, IOP13XX_ATUE_OCCAR);
                __raw_writel(value, IOP13XX_ATUE_OCCDR);
        }

        return PCIBIOS_SUCCESSFUL;
}

static struct pci_ops iop13xx_atue_ops = {
        .read   = iop13xx_atue_read_config,
        .write  = iop13xx_atue_write_config,
};

/* When a PCI device does not exist during config cycles, the XScale gets a
 * bus error instead of returning 0xffffffff.  We can't rely on the ATU status
 * bits to tell us that it was indeed a configuration cycle that caused this
 * error especially in the case when the ATUE link is down.  Instead we rely
 * on data from the south XSI bridge to validate the abort
 */
int
iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
        PRINTK("Data abort: address = 0x%08lx "
                    "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
                addr, fsr, regs->ARM_pc, regs->ARM_lr);

        PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
        PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
        PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));

        /*  If it was an imprecise abort, then we need to correct the
         *  return address to be _after_ the instruction.
         */
        if (fsr & (1 << 10))
                regs->ARM_pc += 4;

        if (is_atue_occdr_error() || is_atux_occdr_error())
                return 0;
        else
                return 1;
}

/* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
 */
struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
{
        int which_atu;
        struct pci_bus *bus = NULL;

        switch (init_atu) {
        case IOP13XX_INIT_ATU_ATUX:
                which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
                break;
        case IOP13XX_INIT_ATU_ATUE:
                which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
                break;
        case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
                which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
                break;
        default:
                which_atu = 0;
        }

        if (!which_atu) {
                BUG();
                return NULL;
        }

        switch (which_atu) {
        case IOP13XX_INIT_ATU_ATUX:
                if (time_after_eq(jiffies + msecs_to_jiffies(1000),
                                  atux_trhfa_timeout))  /* ensure not wrap */
                        while(time_before(jiffies, atux_trhfa_timeout))
                                udelay(100);

                bus = pci_bus_atux = pci_scan_bus(sys->busnr,
                                                  &iop13xx_atux_ops,
                                                  sys);
                break;
        case IOP13XX_INIT_ATU_ATUE:
                bus = pci_bus_atue = pci_scan_bus(sys->busnr,
                                                  &iop13xx_atue_ops,
                                                  sys);
                break;
        }

        return bus;
}

/* This function is called from iop13xx_pci_init() after assigning valid
 * values to iop13xx_atue_pmmr_offset.  This is the location for common
 * setup of ATUE for all IOP13XX implementations.
 */
void __init iop13xx_atue_setup(void)
{
        int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
        u32 reg_val;

#ifdef CONFIG_PCI_MSI
        /* BAR 0 (inbound msi window) */
        __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
        __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
        __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
        __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
#endif

        /* BAR 1 (1:1 mapping with Physical RAM) */
        /* Set limit and enable */
        __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
                        IOP13XX_ATUE_IALR1);
        __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);

        /* Set base at the top of the reserved address space */
        __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
                        PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);

        /* 1:1 mapping with physical ram
         * (leave big endian byte swap disabled)
         */
         __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
         __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);

        /* Outbound window 1 (PCIX/PCIE memory window) */
        /* 32 bit Address Space */
        __raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
        /* PA[35:32] */
        __raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
                        (IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
                        IOP13XX_ATUE_OUMBAR1);

        /* Setup the I/O Bar
         * A[35-16] in 31-12
         */
        __raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
                IOP13XX_ATUE_OIOBAR);
        __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);

        /* clear startup errors */
        iop13xx_atue_pci_status(1);

        /* OIOBAR function number
         */
        reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
        reg_val &= ~0x7;
        reg_val |= func;
        __raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);

        /* OUMBAR function numbers
         */
        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);

        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);

        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);

        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);

        /* Enable inbound and outbound cycles
         */
        reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
        reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
                        PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
        __raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);

        reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
        reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
                        IOP13XX_ATUE_ATUCR_IVM;
        __raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
}

void __init iop13xx_atue_disable(void)
{
        u32 reg_val;

        __raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
        __raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);

        /* wait for cycles to quiesce */
        while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
                                             IOP13XX_ATUE_PCSR_IN_Q_BUSY |
                                             IOP13XX_ATUE_PCSR_LLRB_BUSY))
                cpu_relax();

        /* BAR 0 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
        __raw_writel(0x0, IOP13XX_ATUE_IABAR0);
        __raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
        __raw_writel(0x0, IOP13XX_ATUE_IATVR0);
        __raw_writel(0x0, IOP13XX_ATUE_IALR0);
        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
        reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);

        /* BAR 1 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
        __raw_writel(0x0, IOP13XX_ATUE_IABAR1);
        __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
        __raw_writel(0x0, IOP13XX_ATUE_IATVR1);
        __raw_writel(0x0, IOP13XX_ATUE_IALR1);
        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
        reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);

        /* BAR 2 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
        __raw_writel(0x0, IOP13XX_ATUE_IABAR2);
        __raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
        __raw_writel(0x0, IOP13XX_ATUE_IATVR2);
        __raw_writel(0x0, IOP13XX_ATUE_IALR2);
        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
        reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);

        /* BAR 3 ( Disabled ) */
        reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
        reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);

        /* Setup the I/O Bar
         * A[35-16] in 31-12
         */
        __raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
                        IOP13XX_ATUE_OIOBAR);
        __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
}

/* This function is called from iop13xx_pci_init() after assigning valid
 * values to iop13xx_atux_pmmr_offset.  This is the location for common
 * setup of ATUX for all IOP13XX implementations.
 */
void __init iop13xx_atux_setup(void)
{
        u32 reg_val;
        int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);

        /* Take PCI-X bus out of reset if bootloader hasn't already.
         * According to spec, we should wait for 2^25 PCI clocks to meet
         * the PCI timing parameter Trhfa (RST# high to first access).
         * This is rarely necessary and often ignored.
         */
        reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
        if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
                int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
                msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
                __raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
                                IOP13XX_ATUX_PCSR);
                atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
        }
        else
                atux_trhfa_timeout = jiffies;

#ifdef CONFIG_PCI_MSI
        /* BAR 0 (inbound msi window) */
        __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
        __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
        __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
        __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
#endif

        /* BAR 1 (1:1 mapping with Physical RAM) */
        /* Set limit and enable */
        __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
                        IOP13XX_ATUX_IALR1);
        __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);

        /* Set base at the top of the reserved address space */
        __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
                        PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);

        /* 1:1 mapping with physical ram
         * (leave big endian byte swap disabled)
         */
        __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
        __raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);

        /* Outbound window 1 (PCIX/PCIE memory window) */
        /* 32 bit Address Space */
        __raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
        /* PA[35:32] */
        __raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
                        IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
                        IOP13XX_ATUX_OUMBAR1);

        /* Setup the I/O Bar
         * A[35-16] in 31-12
         */
        __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
                IOP13XX_ATUX_OIOBAR);
        __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);

        /* clear startup errors */
        iop13xx_atux_pci_status(1);

        /* OIOBAR function number
         */
        reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
        reg_val &= ~0x7;
        reg_val |= func;
        __raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);

        /* OUMBAR function numbers
         */
        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);

        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);

        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);

        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
        reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
                        IOP13XX_ATU_OUMBAR_FUNC_NUM);
        reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);

        /* Enable inbound and outbound cycles
         */
        reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
        reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
                        PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
        __raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);

        reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
        reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
        __raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
}

void __init iop13xx_atux_disable(void)
{
        u32 reg_val;

        __raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
        __raw_writel(0x0, IOP13XX_ATUX_ATUCR);

        /* wait for cycles to quiesce */
        while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
                                     IOP13XX_ATUX_PCSR_IN_Q_BUSY))
                cpu_relax();

        /* BAR 0 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
        __raw_writel(0x0, IOP13XX_ATUX_IABAR0);
        __raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
        __raw_writel(0x0, IOP13XX_ATUX_IATVR0);
        __raw_writel(0x0, IOP13XX_ATUX_IALR0);
        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
        reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);

        /* BAR 1 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
        __raw_writel(0x0, IOP13XX_ATUX_IABAR1);
        __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
        __raw_writel(0x0, IOP13XX_ATUX_IATVR1);
        __raw_writel(0x0, IOP13XX_ATUX_IALR1);
        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
        reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);

        /* BAR 2 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
        __raw_writel(0x0, IOP13XX_ATUX_IABAR2);
        __raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
        __raw_writel(0x0, IOP13XX_ATUX_IATVR2);
        __raw_writel(0x0, IOP13XX_ATUX_IALR2);
        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
        reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);

        /* BAR 3 ( Disabled ) */
        __raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
        __raw_writel(0x0, IOP13XX_ATUX_IABAR3);
        __raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
        __raw_writel(0x0, IOP13XX_ATUX_IATVR3);
        __raw_writel(0x0, IOP13XX_ATUX_IALR3);
        reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
        reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
        __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);

        /* Setup the I/O Bar
        * A[35-16] in 31-12
        */
        __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
                        IOP13XX_ATUX_OIOBAR);
        __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
}

void __init iop13xx_set_atu_mmr_bases(void)
{
        /* Based on ESSR0, determine the ATU X/E offsets */
        switch(__raw_readl(IOP13XX_ESSR0) &
                (IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
        /* both asserted */
        case 0:
                iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
                iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
                break;
        /* IOP13XX_CONTROLLER_ONLY = deasserted
         * IOP13XX_INTERFACE_SEL_PCIX = asserted
         */
        case IOP13XX_CONTROLLER_ONLY:
                iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
                iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
                break;
        /* IOP13XX_CONTROLLER_ONLY = asserted
         * IOP13XX_INTERFACE_SEL_PCIX = deasserted
         */
        case IOP13XX_INTERFACE_SEL_PCIX:
                iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
                iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
                break;
        /* both deasserted */
        case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
                iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
                iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
                break;
        default:
                BUG();
        }
}

void __init iop13xx_atu_select(struct hw_pci *plat_pci)
{
        int i;

        /* set system defaults
         * note: if "iop13xx_init_atu=" is specified this autodetect
         * sequence will be bypassed
         */
        if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
                /* check for single/dual interface */
                if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
                        /* ATUE must be present check the device id
                         * to see if ATUX is present.
                         */
                        init_atu |= IOP13XX_INIT_ATU_ATUE;
                        switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
                        case 0x70:
                        case 0x80:
                        case 0xc0:
                                init_atu |= IOP13XX_INIT_ATU_ATUX;
                                break;
                        }
                } else {
                        /* ATUX must be present check the device id
                         * to see if ATUE is present.
                         */
                        init_atu |= IOP13XX_INIT_ATU_ATUX;
                        switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
                        case 0x70:
                        case 0x80:
                        case 0xc0:
                                init_atu |= IOP13XX_INIT_ATU_ATUE;
                                break;
                        }
                }

                /* check central resource and root complex capability */
                if (init_atu & IOP13XX_INIT_ATU_ATUX)
                        if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
                                IOP13XX_ATUX_PCSR_CENTRAL_RES))
                                init_atu &= ~IOP13XX_INIT_ATU_ATUX;

                if (init_atu & IOP13XX_INIT_ATU_ATUE)
                        if (__raw_readl(IOP13XX_ATUE_PCSR) &
                                IOP13XX_ATUE_PCSR_END_POINT)
                                init_atu &= ~IOP13XX_INIT_ATU_ATUE;
        }

        for (i = 0; i < 2; i++) {
                if((init_atu & (1 << i)) == (1 << i))
                        plat_pci->nr_controllers++;
        }
}

void __init iop13xx_pci_init(void)
{
        /* clear pre-existing south bridge errors */
        __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);

        /* Setup the Min Address for PCI memory... */
        pcibios_min_io = 0;
        pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;

        /* if Linux is given control of an ATU
         * clear out its prior configuration,
         * otherwise do not touch the registers
         */
        if (init_atu & IOP13XX_INIT_ATU_ATUE) {
                iop13xx_atue_disable();
                iop13xx_atue_setup();
        }

        if (init_atu & IOP13XX_INIT_ATU_ATUX) {
                iop13xx_atux_disable();
                iop13xx_atux_setup();
        }

        hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
                        "imprecise external abort");
}

/* initialize the pci memory space.  handle any combination of
 * atue and atux enabled/disabled
 */
int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
{
        struct resource *res;
        int which_atu;
        u32 pcixsr, pcsr;

        if (nr > 1)
                return 0;

        res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
        if (!res)
                panic("PCI: unable to alloc resources");


        /* 'nr' assumptions:
         * ATUX is always 0
         * ATUE is 1 when ATUX is also enabled
         * ATUE is 0 when ATUX is disabled
         */
        switch(init_atu) {
        case IOP13XX_INIT_ATU_ATUX:
                which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
                break;
        case IOP13XX_INIT_ATU_ATUE:
                which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
                break;
        case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
                which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
                break;
        default:
                which_atu = 0;
        }

        if (!which_atu) {
                kfree(res);
                return 0;
        }

        switch(which_atu) {
        case IOP13XX_INIT_ATU_ATUX:
                pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
                pcixsr &= ~0xffff;
                pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
                          0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
                          iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
                                  << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
                __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);

                res[0].start = IOP13XX_PCIX_LOWER_IO_PA + IOP13XX_PCIX_IO_BUS_OFFSET;
                res[0].end   = IOP13XX_PCIX_UPPER_IO_PA;
                res[0].name  = "IQ81340 ATUX PCI I/O Space";
                res[0].flags = IORESOURCE_IO;

                res[1].start = IOP13XX_PCIX_LOWER_MEM_RA;
                res[1].end   = IOP13XX_PCIX_UPPER_MEM_RA;
                res[1].name  = "IQ81340 ATUX PCI Memory Space";
                res[1].flags = IORESOURCE_MEM;
                sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
                sys->io_offset = IOP13XX_PCIX_LOWER_IO_PA;
                break;
        case IOP13XX_INIT_ATU_ATUE:
                /* Note: the function number field in the PCSR is ro */
                pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
                pcsr &= ~(0xfff8 << 16);
                pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
                                0 << IOP13XX_ATUE_PCSR_DEV_NUM;

                __raw_writel(pcsr, IOP13XX_ATUE_PCSR);

                res[0].start = IOP13XX_PCIE_LOWER_IO_PA + IOP13XX_PCIE_IO_BUS_OFFSET;
                res[0].end   = IOP13XX_PCIE_UPPER_IO_PA;
                res[0].name  = "IQ81340 ATUE PCI I/O Space";
                res[0].flags = IORESOURCE_IO;

                res[1].start = IOP13XX_PCIE_LOWER_MEM_RA;
                res[1].end   = IOP13XX_PCIE_UPPER_MEM_RA;
                res[1].name  = "IQ81340 ATUE PCI Memory Space";
                res[1].flags = IORESOURCE_MEM;
                sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
                sys->io_offset = IOP13XX_PCIE_LOWER_IO_PA;
                sys->map_irq = iop13xx_pcie_map_irq;
                break;
        default:
                kfree(res);
                return 0;
        }

        request_resource(&ioport_resource, &res[0]);
        request_resource(&iomem_resource, &res[1]);

        sys->resource[0] = &res[0];
        sys->resource[1] = &res[1];
        sys->resource[2] = NULL;

        return 1;
}

u16 iop13xx_dev_id(void)
{
        if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
                return __raw_readw(IOP13XX_ATUE_DID);
        else
                return __raw_readw(IOP13XX_ATUX_DID);
}

static int __init iop13xx_init_atu_setup(char *str)
{
        init_atu = IOP13XX_INIT_ATU_NONE;
        if (str) {
                while (*str != '\0') {
                        switch (*str) {
                        case 'x':
                        case 'X':
                                init_atu |= IOP13XX_INIT_ATU_ATUX;
                                init_atu &= ~IOP13XX_INIT_ATU_NONE;
                                break;
                        case 'e':
                        case 'E':
                                init_atu |= IOP13XX_INIT_ATU_ATUE;
                                init_atu &= ~IOP13XX_INIT_ATU_NONE;
                                break;
                        case ',':
                        case '=':
                                break;
                        default:
                                PRINTK("\"iop13xx_init_atu\" malformed at "
                                            "character: \'%c\'", *str);
                                *(str + 1) = '\0';
                                init_atu = IOP13XX_INIT_ATU_DEFAULT;
                        }
                        str++;
                }
        }
        return 1;
}

__setup("iop13xx_init_atu", iop13xx_init_atu_setup);