/*
 * Common prep/pmac/chrp boot and setup code.
 */

#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
#include <linux/memblock.h>

#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
#include <asm/bootx.h>
#include <asm/btext.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
#include <asm/serial.h>
#include <asm/udbg.h>
#include <asm/mmu_context.h>

#include "setup.h"

#define DBG(fmt...)

extern void bootx_init(unsigned long r4, unsigned long phys);

int boot_cpuid = -1;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
EXPORT_SYMBOL_GPL(boot_cpuid_phys);

int smp_hw_index[NR_CPUS];

unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;

#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
EXPORT_SYMBOL(vgacon_remap_base);
#endif

/*
 * These are used in binfmt_elf.c to put aux entries on the stack
 * for each elf executable being started.
 */
int dcache_bsize;
int icache_bsize;
int ucache_bsize;

/*
 * We're called here very early in the boot.  We determine the machine
 * type and call the appropriate low-level setup functions.
 *  -- Cort <cort@fsmlabs.com>
 *
 * Note that the kernel may be running at an address which is different
 * from the address that it was linked at, so we must use RELOC/PTRRELOC
 * to access static data (including strings).  -- paulus
 */
notrace unsigned long __init early_init(unsigned long dt_ptr)
{
        unsigned long offset = reloc_offset();
        struct cpu_spec *spec;

        /* First zero the BSS -- use memset_io, some platforms don't have
         * caches on yet */
        memset_io((void __iomem *)PTRRELOC(&__bss_start), 0,
                        __bss_stop - __bss_start);

        /*
         * Identify the CPU type and fix up code sections
         * that depend on which cpu we have.
         */
        spec = identify_cpu(offset, mfspr(SPRN_PVR));

        do_feature_fixups(spec->cpu_features,
                          PTRRELOC(&__start___ftr_fixup),
                          PTRRELOC(&__stop___ftr_fixup));

        do_feature_fixups(spec->mmu_features,
                          PTRRELOC(&__start___mmu_ftr_fixup),
                          PTRRELOC(&__stop___mmu_ftr_fixup));

        do_lwsync_fixups(spec->cpu_features,
                         PTRRELOC(&__start___lwsync_fixup),
                         PTRRELOC(&__stop___lwsync_fixup));

        return KERNELBASE + offset;
}


/*
 * Find out what kind of machine we're on and save any data we need
 * from the early boot process (devtree is copied on pmac by prom_init()).
 * This is called very early on the boot process, after a minimal
 * MMU environment has been set up but before MMU_init is called.
 */
notrace void __init machine_init(unsigned long dt_ptr)
{
        lockdep_init();

        /* Enable early debugging if any specified (see udbg.h) */
        udbg_early_init();

        /* Do some early initialization based on the flat device tree */
        early_init_devtree(__va(dt_ptr));

        early_init_mmu();

        probe_machine();

        setup_kdump_trampoline();

#ifdef CONFIG_6xx
        if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
            cpu_has_feature(CPU_FTR_CAN_NAP))
                ppc_md.power_save = ppc6xx_idle;
#endif

#ifdef CONFIG_E500
        if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
            cpu_has_feature(CPU_FTR_CAN_NAP))
                ppc_md.power_save = e500_idle;
#endif
        if (ppc_md.progress)
                ppc_md.progress("id mach(): done", 0x200);
}

#ifdef CONFIG_BOOKE_WDT
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{
        if (p && strncmp(p, "0", 1) != 0)
               booke_wdt_enabled = 1;

        return 0;
}
early_param("wdt", early_parse_wdt);

int __init early_parse_wdt_period (char *p)
{
        if (p)
                booke_wdt_period = simple_strtoul(p, NULL, 0);

        return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif  /* CONFIG_BOOKE_WDT */

/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
        if (cpu_has_feature(CPU_FTR_L2CR)) {
                unsigned long val = simple_strtoul(str, NULL, 0);
                printk(KERN_INFO "l2cr set to %lx\n", val);
                _set_L2CR(0);           /* force invalidate by disable cache */
                _set_L2CR(val);         /* and enable it */
        }
        return 1;
}
__setup("l2cr=", ppc_setup_l2cr);

/* Checks "l3cr=xxxx" command-line option */
int __init ppc_setup_l3cr(char *str)
{
        if (cpu_has_feature(CPU_FTR_L3CR)) {
                unsigned long val = simple_strtoul(str, NULL, 0);
                printk(KERN_INFO "l3cr set to %lx\n", val);
                _set_L3CR(val);         /* and enable it */
        }
        return 1;
}
__setup("l3cr=", ppc_setup_l3cr);

#ifdef CONFIG_GENERIC_NVRAM

/* Generic nvram hooks used by drivers/char/gen_nvram.c */
unsigned char nvram_read_byte(int addr)
{
        if (ppc_md.nvram_read_val)
                return ppc_md.nvram_read_val(addr);
        return 0xff;
}
EXPORT_SYMBOL(nvram_read_byte);

void nvram_write_byte(unsigned char val, int addr)
{
        if (ppc_md.nvram_write_val)
                ppc_md.nvram_write_val(addr, val);
}
EXPORT_SYMBOL(nvram_write_byte);

ssize_t nvram_get_size(void)
{
        if (ppc_md.nvram_size)
                return ppc_md.nvram_size();
        return -1;
}
EXPORT_SYMBOL(nvram_get_size);

void nvram_sync(void)
{
        if (ppc_md.nvram_sync)
                ppc_md.nvram_sync();
}
EXPORT_SYMBOL(nvram_sync);

#endif /* CONFIG_NVRAM */

int __init ppc_init(void)
{
        /* clear the progress line */
        if (ppc_md.progress)
                ppc_md.progress("             ", 0xffff);

        /* call platform init */
        if (ppc_md.init != NULL) {
                ppc_md.init();
        }
        return 0;
}

arch_initcall(ppc_init);

static void __init irqstack_early_init(void)
{
        unsigned int i;

        /* interrupt stacks must be in lowmem, we get that for free on ppc32
         * as the memblock is limited to lowmem by default */
        for_each_possible_cpu(i) {
                softirq_ctx[i] = (struct thread_info *)
                        __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
                hardirq_ctx[i] = (struct thread_info *)
                        __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
        }
}

#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
static void __init exc_lvl_early_init(void)
{
        unsigned int i, hw_cpu;

        /* interrupt stacks must be in lowmem, we get that for free on ppc32
         * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
        for_each_possible_cpu(i) {
                hw_cpu = get_hard_smp_processor_id(i);
                critirq_ctx[hw_cpu] = (struct thread_info *)
                        __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#ifdef CONFIG_BOOKE
                dbgirq_ctx[hw_cpu] = (struct thread_info *)
                        __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
                mcheckirq_ctx[hw_cpu] = (struct thread_info *)
                        __va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#endif
        }
}
#else
#define exc_lvl_early_init()
#endif

/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
        *cmdline_p = cmd_line;

        /* so udelay does something sensible, assume <= 1000 bogomips */
        loops_per_jiffy = 500000000 / HZ;

        unflatten_device_tree();
        check_for_initrd();

        if (ppc_md.init_early)
                ppc_md.init_early();

        find_legacy_serial_ports();

        smp_setup_cpu_maps();

        /* Register early console */
        register_early_udbg_console();

        xmon_setup();

        /*
         * Set cache line size based on type of cpu as a default.
         * Systems with OF can look in the properties on the cpu node(s)
         * for a possibly more accurate value.
         */
        dcache_bsize = cur_cpu_spec->dcache_bsize;
        icache_bsize = cur_cpu_spec->icache_bsize;
        ucache_bsize = 0;
        if (cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE))
                ucache_bsize = icache_bsize = dcache_bsize;

        /* reboot on panic */
        panic_timeout = 180;

        if (ppc_md.panic)
                setup_panic();

        init_mm.start_code = (unsigned long)_stext;
        init_mm.end_code = (unsigned long) _etext;
        init_mm.end_data = (unsigned long) _edata;
        init_mm.brk = klimit;

        exc_lvl_early_init();

        irqstack_early_init();

        /* set up the bootmem stuff with available memory */
        do_init_bootmem();
        if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);

#ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
#endif

        if (ppc_md.setup_arch)
                ppc_md.setup_arch();
        if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);

        paging_init();

        /* Initialize the MMU context management stuff */
        mmu_context_init();

}