1
2
3
4
5
6
7
8
9
10
11#include <linux/init.h>
12#include <linux/platform_device.h>
13#include <linux/sm501.h>
14#include <linux/sm501-regs.h>
15#include <linux/fb.h>
16#include <linux/mtd/physmap.h>
17#include <linux/delay.h>
18#include <linux/interrupt.h>
19#include <linux/i2c.h>
20#include <linux/i2c-pca-platform.h>
21#include <linux/i2c-algo-pca.h>
22#include <linux/usb/r8a66597.h>
23#include <linux/irq.h>
24#include <linux/io.h>
25#include <linux/clk.h>
26#include <linux/errno.h>
27#include <mach/sh7785lcr.h>
28#include <cpu/sh7785.h>
29#include <asm/heartbeat.h>
30#include <asm/clock.h>
31
32
33
34
35
36static struct resource heartbeat_resource = {
37 .start = PLD_LEDCR,
38 .end = PLD_LEDCR,
39 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
40};
41
42static struct platform_device heartbeat_device = {
43 .name = "heartbeat",
44 .id = -1,
45 .num_resources = 1,
46 .resource = &heartbeat_resource,
47};
48
49static struct mtd_partition nor_flash_partitions[] = {
50 {
51 .name = "loader",
52 .offset = 0x00000000,
53 .size = 512 * 1024,
54 },
55 {
56 .name = "bootenv",
57 .offset = MTDPART_OFS_APPEND,
58 .size = 512 * 1024,
59 },
60 {
61 .name = "kernel",
62 .offset = MTDPART_OFS_APPEND,
63 .size = 4 * 1024 * 1024,
64 },
65 {
66 .name = "data",
67 .offset = MTDPART_OFS_APPEND,
68 .size = MTDPART_SIZ_FULL,
69 },
70};
71
72static struct physmap_flash_data nor_flash_data = {
73 .width = 4,
74 .parts = nor_flash_partitions,
75 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
76};
77
78static struct resource nor_flash_resources[] = {
79 [0] = {
80 .start = NOR_FLASH_ADDR,
81 .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
82 .flags = IORESOURCE_MEM,
83 }
84};
85
86static struct platform_device nor_flash_device = {
87 .name = "physmap-flash",
88 .dev = {
89 .platform_data = &nor_flash_data,
90 },
91 .num_resources = ARRAY_SIZE(nor_flash_resources),
92 .resource = nor_flash_resources,
93};
94
95static struct r8a66597_platdata r8a66597_data = {
96 .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
97 .vif = 1,
98};
99
100static struct resource r8a66597_usb_host_resources[] = {
101 [0] = {
102 .start = R8A66597_ADDR,
103 .end = R8A66597_ADDR + R8A66597_SIZE - 1,
104 .flags = IORESOURCE_MEM,
105 },
106 [1] = {
107 .start = 2,
108 .end = 2,
109 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
110 },
111};
112
113static struct platform_device r8a66597_usb_host_device = {
114 .name = "r8a66597_hcd",
115 .id = -1,
116 .dev = {
117 .dma_mask = NULL,
118 .coherent_dma_mask = 0xffffffff,
119 .platform_data = &r8a66597_data,
120 },
121 .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
122 .resource = r8a66597_usb_host_resources,
123};
124
125static struct resource sm501_resources[] = {
126 [0] = {
127 .start = SM107_MEM_ADDR,
128 .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
129 .flags = IORESOURCE_MEM,
130 },
131 [1] = {
132 .start = SM107_REG_ADDR,
133 .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
134 .flags = IORESOURCE_MEM,
135 },
136 [2] = {
137 .start = 10,
138 .flags = IORESOURCE_IRQ,
139 },
140};
141
142static struct fb_videomode sm501_default_mode_crt = {
143 .pixclock = 35714,
144 .xres = 640,
145 .yres = 480,
146 .left_margin = 105,
147 .right_margin = 16,
148 .upper_margin = 33,
149 .lower_margin = 10,
150 .hsync_len = 39,
151 .vsync_len = 2,
152 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
153};
154
155static struct fb_videomode sm501_default_mode_pnl = {
156 .pixclock = 40000,
157 .xres = 640,
158 .yres = 480,
159 .left_margin = 2,
160 .right_margin = 16,
161 .upper_margin = 33,
162 .lower_margin = 10,
163 .hsync_len = 39,
164 .vsync_len = 2,
165 .sync = 0,
166};
167
168static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
169 .def_bpp = 16,
170 .def_mode = &sm501_default_mode_pnl,
171 .flags = SM501FB_FLAG_USE_INIT_MODE |
172 SM501FB_FLAG_USE_HWCURSOR |
173 SM501FB_FLAG_USE_HWACCEL |
174 SM501FB_FLAG_DISABLE_AT_EXIT |
175 SM501FB_FLAG_PANEL_NO_VBIASEN,
176};
177
178static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
179 .def_bpp = 16,
180 .def_mode = &sm501_default_mode_crt,
181 .flags = SM501FB_FLAG_USE_INIT_MODE |
182 SM501FB_FLAG_USE_HWCURSOR |
183 SM501FB_FLAG_USE_HWACCEL |
184 SM501FB_FLAG_DISABLE_AT_EXIT,
185};
186
187static struct sm501_platdata_fb sm501_fb_pdata = {
188 .fb_route = SM501_FB_OWN,
189 .fb_crt = &sm501_pdata_fbsub_crt,
190 .fb_pnl = &sm501_pdata_fbsub_pnl,
191};
192
193static struct sm501_initdata sm501_initdata = {
194 .gpio_high = {
195 .set = 0x00001fe0,
196 .mask = 0x0,
197 },
198 .devices = 0,
199 .mclk = 84 * 1000000,
200 .m1xclk = 112 * 1000000,
201};
202
203static struct sm501_platdata sm501_platform_data = {
204 .init = &sm501_initdata,
205 .fb = &sm501_fb_pdata,
206};
207
208static struct platform_device sm501_device = {
209 .name = "sm501",
210 .id = -1,
211 .dev = {
212 .platform_data = &sm501_platform_data,
213 },
214 .num_resources = ARRAY_SIZE(sm501_resources),
215 .resource = sm501_resources,
216};
217
218static struct resource i2c_proto_resources[] = {
219 [0] = {
220 .start = PCA9564_PROTO_32BIT_ADDR,
221 .end = PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
222 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
223 },
224 [1] = {
225 .start = 12,
226 .end = 12,
227 .flags = IORESOURCE_IRQ,
228 },
229};
230
231static struct resource i2c_resources[] = {
232 [0] = {
233 .start = PCA9564_ADDR,
234 .end = PCA9564_ADDR + PCA9564_SIZE - 1,
235 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
236 },
237 [1] = {
238 .start = 12,
239 .end = 12,
240 .flags = IORESOURCE_IRQ,
241 },
242};
243
244static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
245 .gpio = 0,
246 .i2c_clock_speed = I2C_PCA_CON_330kHz,
247 .timeout = HZ,
248};
249
250static struct platform_device i2c_device = {
251 .name = "i2c-pca-platform",
252 .id = -1,
253 .dev = {
254 .platform_data = &i2c_platform_data,
255 },
256 .num_resources = ARRAY_SIZE(i2c_resources),
257 .resource = i2c_resources,
258};
259
260static struct platform_device *sh7785lcr_devices[] __initdata = {
261 &heartbeat_device,
262 &nor_flash_device,
263 &r8a66597_usb_host_device,
264 &sm501_device,
265 &i2c_device,
266};
267
268static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
269 {
270 I2C_BOARD_INFO("r2025sd", 0x32),
271 },
272};
273
274static int __init sh7785lcr_devices_setup(void)
275{
276 i2c_register_board_info(0, sh7785lcr_i2c_devices,
277 ARRAY_SIZE(sh7785lcr_i2c_devices));
278
279 if (mach_is_sh7785lcr_pt()) {
280 i2c_device.resource = i2c_proto_resources;
281 i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
282 }
283
284 return platform_add_devices(sh7785lcr_devices,
285 ARRAY_SIZE(sh7785lcr_devices));
286}
287device_initcall(sh7785lcr_devices_setup);
288
289
290void __init init_sh7785lcr_IRQ(void)
291{
292 plat_irq_setup_pins(IRQ_MODE_IRQ7654);
293 plat_irq_setup_pins(IRQ_MODE_IRQ3210);
294}
295
296static int sh7785lcr_clk_init(void)
297{
298 struct clk *clk;
299 int ret;
300
301 clk = clk_get(NULL, "extal");
302 if (IS_ERR(clk))
303 return PTR_ERR(clk);
304 ret = clk_set_rate(clk, 33333333);
305 clk_put(clk);
306
307 return ret;
308}
309
310static void sh7785lcr_power_off(void)
311{
312 unsigned char *p;
313
314 p = ioremap(PLD_POFCR, PLD_POFCR + 1);
315 if (!p) {
316 printk(KERN_ERR "%s: ioremap error.\n", __func__);
317 return;
318 }
319 *p = 0x01;
320 iounmap(p);
321 set_bl_bit();
322 while (1)
323 cpu_relax();
324}
325
326
327static void __init sh7785lcr_setup(char **cmdline_p)
328{
329 void __iomem *sm501_reg;
330
331 printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
332
333 pm_power_off = sh7785lcr_power_off;
334
335
336 sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
337 if (!sm501_reg) {
338 printk(KERN_ERR "%s: ioremap error.\n", __func__);
339 return;
340 }
341
342 writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
343 iounmap(sm501_reg);
344}
345
346
347static int sh7785lcr_mode_pins(void)
348{
349 int value = 0;
350
351
352
353
354
355 value |= MODE_PIN4;
356 value |= MODE_PIN5;
357 value |= MODE_PIN6;
358 value |= MODE_PIN7;
359 value |= MODE_PIN8;
360 value |= MODE_PIN9;
361 value |= MODE_PIN14;
362
363 return value;
364}
365
366
367
368
369static struct sh_machine_vector mv_sh7785lcr __initmv = {
370 .mv_name = "SH7785LCR",
371 .mv_setup = sh7785lcr_setup,
372 .mv_clk_init = sh7785lcr_clk_init,
373 .mv_init_irq = init_sh7785lcr_IRQ,
374 .mv_mode_pins = sh7785lcr_mode_pins,
375};
376
377