linux/drivers/scsi/NCR53c406a.c
<<
>>
Prefs
   1/* 
   2 *  NCR53c406.c
   3 *  Low-level SCSI driver for NCR53c406a chip.
   4 *  Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com)
   5 * 
   6 *  LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]
   7 *  Specify IRQ = 0 for non-interrupt driven mode.
   8 *  FASTPIO = 1 for fast pio mode, 0 for slow mode.
   9 *
  10 *  This program is free software; you can redistribute it and/or modify it
  11 *  under the terms of the GNU General Public License as published by the
  12 *  Free Software Foundation; either version 2, or (at your option) any
  13 *  later version.
  14 *
  15 *  This program is distributed in the hope that it will be useful, but
  16 *  WITHOUT ANY WARRANTY; without even the implied warranty of
  17 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18 *  General Public License for more details.
  19 *
  20 */
  21
  22#define NCR53C406A_DEBUG 0
  23#define VERBOSE_NCR53C406A_DEBUG 0
  24
  25/* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */
  26#define USE_PIO 1
  27
  28#define USE_BIOS 0
  29                                /* #define BIOS_ADDR 0xD8000 *//* define this if autoprobe fails */
  30                                /* #define PORT_BASE 0x330 *//* define this if autoprobe fails */
  31                                /* #define IRQ_LEV   0  *//* define this if autoprobe fails */
  32#define DMA_CHAN  5             /* this is ignored if DMA is disabled */
  33
  34/* Set this to 0 if you encounter kernel lockups while transferring 
  35 * data in PIO mode */
  36#define USE_FAST_PIO 1
  37
  38/* ============= End of user configurable parameters ============= */
  39
  40#include <linux/module.h>
  41
  42#include <linux/errno.h>
  43#include <linux/ioport.h>
  44#include <linux/interrupt.h>
  45#include <linux/proc_fs.h>
  46#include <linux/stat.h>
  47#include <linux/init.h>
  48#include <linux/bitops.h>
  49#include <asm/io.h>
  50#include <asm/dma.h>
  51#include <asm/irq.h>
  52
  53#include <linux/blkdev.h>
  54#include <linux/spinlock.h>
  55#include "scsi.h"
  56#include <scsi/scsi_host.h>
  57
  58/* ============================================================= */
  59
  60#define WATCHDOG 5000000
  61
  62#define SYNC_MODE 0             /* Synchronous transfer mode */
  63
  64#ifdef DEBUG
  65#undef NCR53C406A_DEBUG
  66#define NCR53C406A_DEBUG 1
  67#endif
  68
  69#if USE_PIO
  70#define USE_DMA 0
  71#else
  72#define USE_DMA 1
  73#endif
  74
  75/* Default configuration */
  76#define C1_IMG   0x07           /* ID=7 */
  77#define C2_IMG   0x48           /* FE SCSI2 */
  78#if USE_DMA
  79#define C3_IMG   0x21           /* CDB TE */
  80#else
  81#define C3_IMG   0x20           /* CDB */
  82#endif
  83#define C4_IMG   0x04           /* ANE */
  84#define C5_IMG   0xb6           /* AA PI SIE POL */
  85
  86#define REG0 (outb(C4_IMG, CONFIG4))
  87#define REG1 (outb(C5_IMG, CONFIG5))
  88
  89#if NCR53C406A_DEBUG
  90#define DEB(x) x
  91#else
  92#define DEB(x)
  93#endif
  94
  95#if VERBOSE_NCR53C406A_DEBUG
  96#define VDEB(x) x
  97#else
  98#define VDEB(x)
  99#endif
 100
 101#define LOAD_DMA_COUNT(count) \
 102  outb(count & 0xff, TC_LSB); \
 103  outb((count >> 8) & 0xff, TC_MSB); \
 104  outb((count >> 16) & 0xff, TC_HIGH);
 105
 106/* Chip commands */
 107#define DMA_OP               0x80
 108
 109#define SCSI_NOP             0x00
 110#define FLUSH_FIFO           0x01
 111#define CHIP_RESET           0x02
 112#define SCSI_RESET           0x03
 113#define RESELECT             0x40
 114#define SELECT_NO_ATN        0x41
 115#define SELECT_ATN           0x42
 116#define SELECT_ATN_STOP      0x43
 117#define ENABLE_SEL           0x44
 118#define DISABLE_SEL          0x45
 119#define SELECT_ATN3          0x46
 120#define RESELECT3            0x47
 121#define TRANSFER_INFO        0x10
 122#define INIT_CMD_COMPLETE    0x11
 123#define MSG_ACCEPT           0x12
 124#define TRANSFER_PAD         0x18
 125#define SET_ATN              0x1a
 126#define RESET_ATN            0x1b
 127#define SEND_MSG             0x20
 128#define SEND_STATUS          0x21
 129#define SEND_DATA            0x22
 130#define DISCONN_SEQ          0x23
 131#define TERMINATE_SEQ        0x24
 132#define TARG_CMD_COMPLETE    0x25
 133#define DISCONN              0x27
 134#define RECV_MSG             0x28
 135#define RECV_CMD             0x29
 136#define RECV_DATA            0x2a
 137#define RECV_CMD_SEQ         0x2b
 138#define TARGET_ABORT_DMA     0x04
 139
 140/*----------------------------------------------------------------*/
 141/* the following will set the monitor border color (useful to find
 142   where something crashed or gets stuck at */
 143/* 1 = blue
 144   2 = green
 145   3 = cyan
 146   4 = red
 147   5 = magenta
 148   6 = yellow
 149   7 = white
 150*/
 151
 152#if NCR53C406A_DEBUG
 153#define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);}
 154#else
 155#define rtrc(i) {}
 156#endif
 157/*----------------------------------------------------------------*/
 158
 159enum Phase {
 160        idle,
 161        data_out,
 162        data_in,
 163        command_ph,
 164        status_ph,
 165        message_out,
 166        message_in
 167};
 168
 169/* Static function prototypes */
 170static void NCR53c406a_intr(void *);
 171static irqreturn_t do_NCR53c406a_intr(int, void *);
 172static void chip_init(void);
 173static void calc_port_addr(void);
 174#ifndef IRQ_LEV
 175static int irq_probe(void);
 176#endif
 177
 178/* ================================================================= */
 179
 180#if USE_BIOS
 181static void *bios_base;
 182#endif
 183
 184#ifdef PORT_BASE
 185static int port_base = PORT_BASE;
 186#else
 187static int port_base;
 188#endif
 189
 190#ifdef IRQ_LEV
 191static int irq_level = IRQ_LEV;
 192#else
 193static int irq_level = -1;      /* 0 is 'no irq', so use -1 for 'uninitialized' */
 194#endif
 195
 196#if USE_DMA
 197static int dma_chan;
 198#endif
 199
 200#if USE_PIO
 201static int fast_pio = USE_FAST_PIO;
 202#endif
 203
 204static Scsi_Cmnd *current_SC;
 205static char info_msg[256];
 206
 207/* ================================================================= */
 208
 209/* possible BIOS locations */
 210#if USE_BIOS
 211static void *addresses[] = {
 212        (void *) 0xd8000,
 213        (void *) 0xc8000
 214};
 215#define ADDRESS_COUNT ARRAY_SIZE(addresses)
 216#endif                          /* USE_BIOS */
 217
 218/* possible i/o port addresses */
 219static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
 220#define PORT_COUNT ARRAY_SIZE(ports)
 221
 222#ifndef MODULE
 223/* possible interrupt channels */
 224static unsigned short intrs[] = { 10, 11, 12, 15 };
 225#define INTR_COUNT ARRAY_SIZE(intrs)
 226#endif /* !MODULE */
 227
 228/* signatures for NCR 53c406a based controllers */
 229#if USE_BIOS
 230struct signature {
 231        char *signature;
 232        int sig_offset;
 233        int sig_length;
 234} signatures[] __initdata = {
 235        /*          1         2         3         4         5         6 */
 236        /* 123456789012345678901234567890123456789012345678901234567890 */
 237        {
 238"Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82},};
 239
 240#define SIGNATURE_COUNT ARRAY_SIZE(signatures)
 241#endif                          /* USE_BIOS */
 242
 243/* ============================================================ */
 244
 245/* Control Register Set 0 */
 246static int TC_LSB;              /* transfer counter lsb         */
 247static int TC_MSB;              /* transfer counter msb */
 248static int SCSI_FIFO;           /* scsi fifo register   */
 249static int CMD_REG;             /* command register             */
 250static int STAT_REG;            /* status register              */
 251static int DEST_ID;             /* selection/reselection bus id */
 252static int INT_REG;             /* interrupt status register    */
 253static int SRTIMOUT;            /* select/reselect timeout reg  */
 254static int SEQ_REG;             /* sequence step register       */
 255static int SYNCPRD;             /* synchronous transfer period  */
 256static int FIFO_FLAGS;          /* indicates # of bytes in fifo */
 257static int SYNCOFF;             /* synchronous offset register  */
 258static int CONFIG1;             /* configuration register       */
 259static int CLKCONV;             /* clock conversion reg */
 260                                /*static int TESTREG;*//* test mode register           */
 261static int CONFIG2;             /* Configuration 2 Register     */
 262static int CONFIG3;             /* Configuration 3 Register     */
 263static int CONFIG4;             /* Configuration 4 Register     */
 264static int TC_HIGH;             /* Transfer Counter High */
 265                                /*static int FIFO_BOTTOM;*//* Reserve FIFO byte register   */
 266
 267/* Control Register Set 1 */
 268                                /*static int JUMPER_SENSE;*//* Jumper sense port reg (r/w) */
 269                                /*static int SRAM_PTR;*//* SRAM address pointer reg (r/w) */
 270                                /*static int SRAM_DATA;*//* SRAM data register (r/w) */
 271static int PIO_FIFO;            /* PIO FIFO registers (r/w) */
 272                                /*static int PIO_FIFO1;*//*  */
 273                                /*static int PIO_FIFO2;*//*  */
 274                                /*static int PIO_FIFO3;*//*  */
 275static int PIO_STATUS;          /* PIO status (r/w) */
 276                                /*static int ATA_CMD;*//* ATA command/status reg (r/w) */
 277                                /*static int ATA_ERR;*//* ATA features/error register (r/w) */
 278static int PIO_FLAG;            /* PIO flag interrupt enable (r/w) */
 279static int CONFIG5;             /* Configuration 5 register (r/w) */
 280                                /*static int SIGNATURE;*//* Signature Register (r) */
 281                                /*static int CONFIG6;*//* Configuration 6 register (r) */
 282
 283/* ============================================================== */
 284
 285#if USE_DMA
 286static __inline__ int NCR53c406a_dma_setup(unsigned char *ptr, unsigned int count, unsigned char mode)
 287{
 288        unsigned limit;
 289        unsigned long flags = 0;
 290
 291        VDEB(printk("dma: before count=%d   ", count));
 292        if (dma_chan <= 3) {
 293                if (count > 65536)
 294                        count = 65536;
 295                limit = 65536 - (((unsigned) ptr) & 0xFFFF);
 296        } else {
 297                if (count > (65536 << 1))
 298                        count = (65536 << 1);
 299                limit = (65536 << 1) - (((unsigned) ptr) & 0x1FFFF);
 300        }
 301
 302        if (count > limit)
 303                count = limit;
 304
 305        VDEB(printk("after count=%d\n", count));
 306        if ((count & 1) || (((unsigned) ptr) & 1))
 307                panic("NCR53c406a: attempted unaligned DMA transfer\n");
 308
 309        flags = claim_dma_lock();
 310        disable_dma(dma_chan);
 311        clear_dma_ff(dma_chan);
 312        set_dma_addr(dma_chan, (long) ptr);
 313        set_dma_count(dma_chan, count);
 314        set_dma_mode(dma_chan, mode);
 315        enable_dma(dma_chan);
 316        release_dma_lock(flags);
 317
 318        return count;
 319}
 320
 321static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count)
 322{
 323        return NCR53c406a_dma_setup(src, count, DMA_MODE_WRITE);
 324}
 325
 326static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count)
 327{
 328        return NCR53c406a_dma_setup(src, count, DMA_MODE_READ);
 329}
 330
 331static __inline__ int NCR53c406a_dma_residual(void)
 332{
 333        register int tmp;
 334        unsigned long flags;
 335
 336        flags = claim_dma_lock();
 337        clear_dma_ff(dma_chan);
 338        tmp = get_dma_residue(dma_chan);
 339        release_dma_lock(flags);
 340
 341        return tmp;
 342}
 343#endif                          /* USE_DMA */
 344
 345#if USE_PIO
 346static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen)
 347{
 348        int i;
 349        int len;                /* current scsi fifo size */
 350
 351        REG1;
 352        while (reqlen) {
 353                i = inb(PIO_STATUS);
 354                /*    VDEB(printk("pio_status=%x\n", i)); */
 355                if (i & 0x80)
 356                        return 0;
 357
 358                switch (i & 0x1e) {
 359                default:
 360                case 0x10:
 361                        len = 0;
 362                        break;
 363                case 0x0:
 364                        len = 1;
 365                        break;
 366                case 0x8:
 367                        len = 42;
 368                        break;
 369                case 0xc:
 370                        len = 84;
 371                        break;
 372                case 0xe:
 373                        len = 128;
 374                        break;
 375                }
 376
 377                if ((i & 0x40) && len == 0) {   /* fifo empty and interrupt occurred */
 378                        return 0;
 379                }
 380
 381                if (len) {
 382                        if (len > reqlen)
 383                                len = reqlen;
 384
 385                        if (fast_pio && len > 3) {
 386                                insl(PIO_FIFO, request, len >> 2);
 387                                request += len & 0xfc;
 388                                reqlen -= len & 0xfc;
 389                        } else {
 390                                while (len--) {
 391                                        *request++ = inb(PIO_FIFO);
 392                                        reqlen--;
 393                                }
 394                        }
 395                }
 396        }
 397        return 0;
 398}
 399
 400static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen)
 401{
 402        int i = 0;
 403        int len;                /* current scsi fifo size */
 404
 405        REG1;
 406        while (reqlen && !(i & 0x40)) {
 407                i = inb(PIO_STATUS);
 408                /*    VDEB(printk("pio_status=%x\n", i)); */
 409                if (i & 0x80)   /* error */
 410                        return 0;
 411
 412                switch (i & 0x1e) {
 413                case 0x10:
 414                        len = 128;
 415                        break;
 416                case 0x0:
 417                        len = 84;
 418                        break;
 419                case 0x8:
 420                        len = 42;
 421                        break;
 422                case 0xc:
 423                        len = 1;
 424                        break;
 425                default:
 426                case 0xe:
 427                        len = 0;
 428                        break;
 429                }
 430
 431                if (len) {
 432                        if (len > reqlen)
 433                                len = reqlen;
 434
 435                        if (fast_pio && len > 3) {
 436                                outsl(PIO_FIFO, request, len >> 2);
 437                                request += len & 0xfc;
 438                                reqlen -= len & 0xfc;
 439                        } else {
 440                                while (len--) {
 441                                        outb(*request++, PIO_FIFO);
 442                                        reqlen--;
 443                                }
 444                        }
 445                }
 446        }
 447        return 0;
 448}
 449#endif                          /* USE_PIO */
 450
 451static int __init NCR53c406a_detect(struct scsi_host_template * tpnt)
 452{
 453        int present = 0;
 454        struct Scsi_Host *shpnt = NULL;
 455#ifndef PORT_BASE
 456        int i;
 457#endif
 458
 459#if USE_BIOS
 460        int ii, jj;
 461        bios_base = 0;
 462        /* look for a valid signature */
 463        for (ii = 0; ii < ADDRESS_COUNT && !bios_base; ii++)
 464                for (jj = 0; (jj < SIGNATURE_COUNT) && !bios_base; jj++)
 465                        if (!memcmp((void *) addresses[ii] + signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length))
 466                                bios_base = addresses[ii];
 467
 468        if (!bios_base) {
 469                printk("NCR53c406a: BIOS signature not found\n");
 470                return 0;
 471        }
 472
 473        DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base);
 474            );
 475#endif                          /* USE_BIOS */
 476
 477#ifdef PORT_BASE
 478        if (!request_region(port_base, 0x10, "NCR53c406a"))     /* ports already snatched */
 479                port_base = 0;
 480
 481#else                           /* autodetect */
 482        if (port_base) {        /* LILO override */
 483                if (!request_region(port_base, 0x10, "NCR53c406a"))
 484                        port_base = 0;
 485        } else {
 486                for (i = 0; i < PORT_COUNT && !port_base; i++) {
 487                        if (!request_region(ports[i], 0x10, "NCR53c406a")) {
 488                                DEB(printk("NCR53c406a: port 0x%x in use\n", ports[i]));
 489                        } else {
 490                                VDEB(printk("NCR53c406a: port 0x%x available\n", ports[i]));
 491                                outb(C5_IMG, ports[i] + 0x0d);  /* reg set 1 */
 492                                if ((inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58) {
 493                                        port_base = ports[i];
 494                                        VDEB(printk("NCR53c406a: Sig register valid\n"));
 495                                        VDEB(printk("port_base=0x%x\n", port_base));
 496                                        break;
 497                                }
 498                                release_region(ports[i], 0x10);
 499                        }
 500                }
 501        }
 502#endif                          /* PORT_BASE */
 503
 504        if (!port_base) {       /* no ports found */
 505                printk("NCR53c406a: no available ports found\n");
 506                return 0;
 507        }
 508
 509        DEB(printk("NCR53c406a detected\n"));
 510
 511        calc_port_addr();
 512        chip_init();
 513
 514#ifndef IRQ_LEV
 515        if (irq_level < 0) {    /* LILO override if >= 0 */
 516                irq_level = irq_probe();
 517                if (irq_level < 0) {    /* Trouble */
 518                        printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level);
 519                        goto err_release;
 520                }
 521        }
 522#endif
 523
 524        DEB(printk("NCR53c406a: using port_base 0x%x\n", port_base));
 525
 526        present = 1;
 527        tpnt->proc_name = "NCR53c406a";
 528
 529        shpnt = scsi_register(tpnt, 0);
 530        if (!shpnt) {
 531                printk("NCR53c406a: Unable to register host, giving up.\n");
 532                goto err_release;
 533        }
 534
 535        if (irq_level > 0) {
 536                if (request_irq(irq_level, do_NCR53c406a_intr, 0, "NCR53c406a", shpnt)) {
 537                        printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level);
 538                        goto err_free_scsi;
 539                }
 540                tpnt->can_queue = 1;
 541                DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level));
 542        } else if (irq_level == 0) {
 543                tpnt->can_queue = 0;
 544                DEB(printk("NCR53c406a: No interrupts detected\n"));
 545                printk("NCR53c406a driver no longer supports polling interface\n");
 546                printk("Please email linux-scsi@vger.kernel.org\n");
 547                        
 548#if USE_DMA
 549                printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n");
 550#endif                          /* USE_DMA */
 551                goto err_free_scsi;
 552        } else {
 553                DEB(printk("NCR53c406a: Shouldn't get here!\n"));
 554                goto err_free_scsi;
 555        }
 556
 557#if USE_DMA
 558        dma_chan = DMA_CHAN;
 559        if (request_dma(dma_chan, "NCR53c406a") != 0) {
 560                printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan);
 561                goto err_free_irq;
 562        }
 563
 564        DEB(printk("Allocated DMA channel %d\n", dma_chan));
 565#endif                          /* USE_DMA */
 566
 567        shpnt->irq = irq_level;
 568        shpnt->io_port = port_base;
 569        shpnt->n_io_port = 0x10;
 570#if USE_DMA
 571        shpnt->dma = dma_chan;
 572#endif
 573
 574#if USE_DMA
 575        sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan);
 576#else
 577        sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow");
 578#endif
 579
 580        return (present);
 581
 582#if USE_DMA
 583      err_free_irq:
 584        if (irq_level)
 585                free_irq(irq_level, shpnt);
 586#endif
 587      err_free_scsi:
 588        scsi_unregister(shpnt);
 589      err_release:
 590        release_region(port_base, 0x10);
 591        return 0;
 592}
 593
 594static int NCR53c406a_release(struct Scsi_Host *shost)
 595{
 596        if (shost->irq)
 597                free_irq(shost->irq, NULL);
 598#ifdef USE_DMA
 599        if (shost->dma_channel != 0xff)
 600                free_dma(shost->dma_channel);
 601#endif
 602        if (shost->io_port && shost->n_io_port)
 603                release_region(shost->io_port, shost->n_io_port);
 604
 605        scsi_unregister(shost);
 606        return 0;
 607}
 608
 609#ifndef MODULE
 610/* called from init/main.c */
 611static int __init NCR53c406a_setup(char *str)
 612{
 613        static size_t setup_idx = 0;
 614        size_t i;
 615        int ints[4];
 616
 617        DEB(printk("NCR53c406a: Setup called\n");
 618            );
 619
 620        if (setup_idx >= PORT_COUNT - 1) {
 621                printk("NCR53c406a: Setup called too many times.  Bad LILO params?\n");
 622                return 0;
 623        }
 624        get_options(str, 4, ints);
 625        if (ints[0] < 1 || ints[0] > 3) {
 626                printk("NCR53c406a: Malformed command line\n");
 627                printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n");
 628                return 0;
 629        }
 630        for (i = 0; i < PORT_COUNT && !port_base; i++)
 631                if (ports[i] == ints[1]) {
 632                        port_base = ints[1];
 633                        DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base);
 634                            )
 635                }
 636        if (!port_base) {
 637                printk("NCR53c406a: Invalid PORTBASE 0x%x specified\n", ints[1]);
 638                return 0;
 639        }
 640
 641        if (ints[0] > 1) {
 642                if (ints[2] == 0) {
 643                        irq_level = 0;
 644                        DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);
 645                            )
 646                } else
 647                        for (i = 0; i < INTR_COUNT && irq_level < 0; i++)
 648                                if (intrs[i] == ints[2]) {
 649                                        irq_level = ints[2];
 650                                        DEB(printk("NCR53c406a: Specified irq %d\n", port_base);
 651                                            )
 652                                }
 653                if (irq_level < 0)
 654                        printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]);
 655        }
 656
 657        if (ints[0] > 2)
 658                fast_pio = ints[3];
 659
 660        DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);)
 661        return 1;
 662}
 663
 664__setup("ncr53c406a=", NCR53c406a_setup);
 665
 666#endif /* !MODULE */
 667
 668static const char *NCR53c406a_info(struct Scsi_Host *SChost)
 669{
 670        DEB(printk("NCR53c406a_info called\n"));
 671        return (info_msg);
 672}
 673
 674#if 0
 675static void wait_intr(void)
 676{
 677        unsigned long i = jiffies + WATCHDOG;
 678
 679        while (time_after(i, jiffies) && !(inb(STAT_REG) & 0xe0)) {     /* wait for a pseudo-interrupt */
 680                cpu_relax();
 681                barrier();
 682        }
 683
 684        if (time_before_eq(i, jiffies)) {       /* Timed out */
 685                rtrc(0);
 686                current_SC->result = DID_TIME_OUT << 16;
 687                current_SC->SCp.phase = idle;
 688                current_SC->scsi_done(current_SC);
 689                return;
 690        }
 691
 692        NCR53c406a_intr(NULL);
 693}
 694#endif
 695
 696static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 697{
 698        int i;
 699
 700        VDEB(printk("NCR53c406a_queue called\n"));
 701        DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, scsi_bufflen(SCpnt)));
 702
 703#if 0
 704        VDEB(for (i = 0; i < SCpnt->cmd_len; i++)
 705             printk("cmd[%d]=%02x  ", i, SCpnt->cmnd[i]));
 706        VDEB(printk("\n"));
 707#endif
 708
 709        current_SC = SCpnt;
 710        current_SC->scsi_done = done;
 711        current_SC->SCp.phase = command_ph;
 712        current_SC->SCp.Status = 0;
 713        current_SC->SCp.Message = 0;
 714
 715        /* We are locked here already by the mid layer */
 716        REG0;
 717        outb(scmd_id(SCpnt), DEST_ID);  /* set destination */
 718        outb(FLUSH_FIFO, CMD_REG);      /* reset the fifos */
 719
 720        for (i = 0; i < SCpnt->cmd_len; i++) {
 721                outb(SCpnt->cmnd[i], SCSI_FIFO);
 722        }
 723        outb(SELECT_NO_ATN, CMD_REG);
 724
 725        rtrc(1);
 726        return 0;
 727}
 728
 729static DEF_SCSI_QCMD(NCR53c406a_queue)
 730
 731static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
 732{
 733        DEB(printk("NCR53c406a_reset called\n"));
 734
 735        spin_lock_irq(SCpnt->device->host->host_lock);
 736
 737        outb(C4_IMG, CONFIG4);  /* Select reg set 0 */
 738        outb(CHIP_RESET, CMD_REG);
 739        outb(SCSI_NOP, CMD_REG);        /* required after reset */
 740        outb(SCSI_RESET, CMD_REG);
 741        chip_init();
 742
 743        rtrc(2);
 744
 745        spin_unlock_irq(SCpnt->device->host->host_lock);
 746
 747        return SUCCESS;
 748}
 749
 750static int NCR53c406a_biosparm(struct scsi_device *disk,
 751                               struct block_device *dev,
 752                               sector_t capacity, int *info_array)
 753{
 754        int size;
 755
 756        DEB(printk("NCR53c406a_biosparm called\n"));
 757
 758        size = capacity;
 759        info_array[0] = 64;     /* heads */
 760        info_array[1] = 32;     /* sectors */
 761        info_array[2] = size >> 11;     /* cylinders */
 762        if (info_array[2] > 1024) {     /* big disk */
 763                info_array[0] = 255;
 764                info_array[1] = 63;
 765                info_array[2] = size / (255 * 63);
 766        }
 767        return 0;
 768}
 769
 770static irqreturn_t do_NCR53c406a_intr(int unused, void *dev_id)
 771{
 772        unsigned long flags;
 773        struct Scsi_Host *dev = dev_id;
 774
 775        spin_lock_irqsave(dev->host_lock, flags);
 776        NCR53c406a_intr(dev_id);
 777        spin_unlock_irqrestore(dev->host_lock, flags);
 778        return IRQ_HANDLED;
 779}
 780
 781static void NCR53c406a_intr(void *dev_id)
 782{
 783        DEB(unsigned char fifo_size;
 784            )
 785            DEB(unsigned char seq_reg;
 786            )
 787        unsigned char status, int_reg;
 788#if USE_PIO
 789        unsigned char pio_status;
 790        struct scatterlist *sg;
 791        int i;
 792#endif
 793
 794        VDEB(printk("NCR53c406a_intr called\n"));
 795
 796#if USE_PIO
 797        REG1;
 798        pio_status = inb(PIO_STATUS);
 799#endif
 800        REG0;
 801        status = inb(STAT_REG);
 802        DEB(seq_reg = inb(SEQ_REG));
 803        int_reg = inb(INT_REG);
 804        DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f);
 805
 806#if NCR53C406A_DEBUG
 807        printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size);
 808#if (USE_DMA)
 809        printk("\n");
 810#else
 811        printk(", pio=%02x\n", pio_status);
 812#endif                          /* USE_DMA */
 813#endif                          /* NCR53C406A_DEBUG */
 814
 815        if (int_reg & 0x80) {   /* SCSI reset intr */
 816                rtrc(3);
 817                DEB(printk("NCR53c406a: reset intr received\n"));
 818                current_SC->SCp.phase = idle;
 819                current_SC->result = DID_RESET << 16;
 820                current_SC->scsi_done(current_SC);
 821                return;
 822        }
 823#if USE_PIO
 824        if (pio_status & 0x80) {
 825                printk("NCR53C406A: Warning: PIO error!\n");
 826                current_SC->SCp.phase = idle;
 827                current_SC->result = DID_ERROR << 16;
 828                current_SC->scsi_done(current_SC);
 829                return;
 830        }
 831#endif                          /* USE_PIO */
 832
 833        if (status & 0x20) {    /* Parity error */
 834                printk("NCR53c406a: Warning: parity error!\n");
 835                current_SC->SCp.phase = idle;
 836                current_SC->result = DID_PARITY << 16;
 837                current_SC->scsi_done(current_SC);
 838                return;
 839        }
 840
 841        if (status & 0x40) {    /* Gross error */
 842                printk("NCR53c406a: Warning: gross error!\n");
 843                current_SC->SCp.phase = idle;
 844                current_SC->result = DID_ERROR << 16;
 845                current_SC->scsi_done(current_SC);
 846                return;
 847        }
 848
 849        if (int_reg & 0x20) {   /* Disconnect */
 850                DEB(printk("NCR53c406a: disconnect intr received\n"));
 851                if (current_SC->SCp.phase != message_in) {      /* Unexpected disconnect */
 852                        current_SC->result = DID_NO_CONNECT << 16;
 853                } else {        /* Command complete, return status and message */
 854                        current_SC->result = (current_SC->SCp.Status & 0xff)
 855                            | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16);
 856                }
 857
 858                rtrc(0);
 859                current_SC->SCp.phase = idle;
 860                current_SC->scsi_done(current_SC);
 861                return;
 862        }
 863
 864        switch (status & 0x07) {        /* scsi phase */
 865        case 0x00:              /* DATA-OUT */
 866                if (int_reg & 0x10) {   /* Target requesting info transfer */
 867                        rtrc(5);
 868                        current_SC->SCp.phase = data_out;
 869                        VDEB(printk("NCR53c406a: Data-Out phase\n"));
 870                        outb(FLUSH_FIFO, CMD_REG);
 871                        LOAD_DMA_COUNT(scsi_bufflen(current_SC));       /* Max transfer size */
 872#if USE_DMA                     /* No s/g support for DMA */
 873                        NCR53c406a_dma_write(scsi_sglist(current_SC),
 874                                             scsdi_bufflen(current_SC));
 875
 876#endif                          /* USE_DMA */
 877                        outb(TRANSFER_INFO | DMA_OP, CMD_REG);
 878#if USE_PIO
 879                        scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
 880                                NCR53c406a_pio_write(sg_virt(sg), sg->length);
 881                        }
 882                        REG0;
 883#endif                          /* USE_PIO */
 884                }
 885                break;
 886
 887        case 0x01:              /* DATA-IN */
 888                if (int_reg & 0x10) {   /* Target requesting info transfer */
 889                        rtrc(6);
 890                        current_SC->SCp.phase = data_in;
 891                        VDEB(printk("NCR53c406a: Data-In phase\n"));
 892                        outb(FLUSH_FIFO, CMD_REG);
 893                        LOAD_DMA_COUNT(scsi_bufflen(current_SC));       /* Max transfer size */
 894#if USE_DMA                     /* No s/g support for DMA */
 895                        NCR53c406a_dma_read(scsi_sglist(current_SC),
 896                                            scsdi_bufflen(current_SC));
 897#endif                          /* USE_DMA */
 898                        outb(TRANSFER_INFO | DMA_OP, CMD_REG);
 899#if USE_PIO
 900                        scsi_for_each_sg(current_SC, sg, scsi_sg_count(current_SC), i) {
 901                                NCR53c406a_pio_read(sg_virt(sg), sg->length);
 902                        }
 903                        REG0;
 904#endif                          /* USE_PIO */
 905                }
 906                break;
 907
 908        case 0x02:              /* COMMAND */
 909                current_SC->SCp.phase = command_ph;
 910                printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n");
 911                break;
 912
 913        case 0x03:              /* STATUS */
 914                rtrc(7);
 915                current_SC->SCp.phase = status_ph;
 916                VDEB(printk("NCR53c406a: Status phase\n"));
 917                outb(FLUSH_FIFO, CMD_REG);
 918                outb(INIT_CMD_COMPLETE, CMD_REG);
 919                break;
 920
 921        case 0x04:              /* Reserved */
 922        case 0x05:              /* Reserved */
 923                printk("NCR53c406a: WARNING: Reserved phase!!!\n");
 924                break;
 925
 926        case 0x06:              /* MESSAGE-OUT */
 927                DEB(printk("NCR53c406a: Message-Out phase\n"));
 928                current_SC->SCp.phase = message_out;
 929                outb(SET_ATN, CMD_REG); /* Reject the message */
 930                outb(MSG_ACCEPT, CMD_REG);
 931                break;
 932
 933        case 0x07:              /* MESSAGE-IN */
 934                rtrc(4);
 935                VDEB(printk("NCR53c406a: Message-In phase\n"));
 936                current_SC->SCp.phase = message_in;
 937
 938                current_SC->SCp.Status = inb(SCSI_FIFO);
 939                current_SC->SCp.Message = inb(SCSI_FIFO);
 940
 941                VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f));
 942                DEB(printk("Status = %02x  Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message));
 943
 944                if (current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) {
 945                        outb(SET_ATN, CMD_REG); /* Reject message */
 946                        DEB(printk("Discarding SAVE_POINTERS message\n"));
 947                }
 948                outb(MSG_ACCEPT, CMD_REG);
 949                break;
 950        }
 951}
 952
 953#ifndef IRQ_LEV
 954static int irq_probe(void)
 955{
 956        int irqs, irq;
 957        unsigned long i;
 958
 959        inb(INT_REG);           /* clear the interrupt register */
 960        irqs = probe_irq_on();
 961
 962        /* Invalid command will cause an interrupt */
 963        REG0;
 964        outb(0xff, CMD_REG);
 965
 966        /* Wait for the interrupt to occur */
 967        i = jiffies + WATCHDOG;
 968        while (time_after(i, jiffies) && !(inb(STAT_REG) & 0x80))
 969                barrier();
 970        if (time_before_eq(i, jiffies)) {       /* Timed out, must be hardware trouble */
 971                probe_irq_off(irqs);
 972                return -1;
 973        }
 974
 975        irq = probe_irq_off(irqs);
 976
 977        /* Kick the chip */
 978        outb(CHIP_RESET, CMD_REG);
 979        outb(SCSI_NOP, CMD_REG);
 980        chip_init();
 981
 982        return irq;
 983}
 984#endif                          /* IRQ_LEV */
 985
 986static void chip_init(void)
 987{
 988        REG1;
 989#if USE_DMA
 990        outb(0x00, PIO_STATUS);
 991#else                           /* USE_PIO */
 992        outb(0x01, PIO_STATUS);
 993#endif
 994        outb(0x00, PIO_FLAG);
 995
 996        outb(C4_IMG, CONFIG4);  /* REG0; */
 997        outb(C3_IMG, CONFIG3);
 998        outb(C2_IMG, CONFIG2);
 999        outb(C1_IMG, CONFIG1);
1000
1001        outb(0x05, CLKCONV);    /* clock conversion factor */
1002        outb(0x9C, SRTIMOUT);   /* Selection timeout */
1003        outb(0x05, SYNCPRD);    /* Synchronous transfer period */
1004        outb(SYNC_MODE, SYNCOFF);       /* synchronous mode */
1005}
1006
1007static void __init calc_port_addr(void)
1008{
1009        /* Control Register Set 0 */
1010        TC_LSB = (port_base + 0x00);
1011        TC_MSB = (port_base + 0x01);
1012        SCSI_FIFO = (port_base + 0x02);
1013        CMD_REG = (port_base + 0x03);
1014        STAT_REG = (port_base + 0x04);
1015        DEST_ID = (port_base + 0x04);
1016        INT_REG = (port_base + 0x05);
1017        SRTIMOUT = (port_base + 0x05);
1018        SEQ_REG = (port_base + 0x06);
1019        SYNCPRD = (port_base + 0x06);
1020        FIFO_FLAGS = (port_base + 0x07);
1021        SYNCOFF = (port_base + 0x07);
1022        CONFIG1 = (port_base + 0x08);
1023        CLKCONV = (port_base + 0x09);
1024        /* TESTREG          = (port_base+0x0A); */
1025        CONFIG2 = (port_base + 0x0B);
1026        CONFIG3 = (port_base + 0x0C);
1027        CONFIG4 = (port_base + 0x0D);
1028        TC_HIGH = (port_base + 0x0E);
1029        /* FIFO_BOTTOM      = (port_base+0x0F); */
1030
1031        /* Control Register Set 1 */
1032        /* JUMPER_SENSE     = (port_base+0x00); */
1033        /* SRAM_PTR         = (port_base+0x01); */
1034        /* SRAM_DATA        = (port_base+0x02); */
1035        PIO_FIFO = (port_base + 0x04);
1036        /* PIO_FIFO1        = (port_base+0x05); */
1037        /* PIO_FIFO2        = (port_base+0x06); */
1038        /* PIO_FIFO3        = (port_base+0x07); */
1039        PIO_STATUS = (port_base + 0x08);
1040        /* ATA_CMD          = (port_base+0x09); */
1041        /* ATA_ERR          = (port_base+0x0A); */
1042        PIO_FLAG = (port_base + 0x0B);
1043        CONFIG5 = (port_base + 0x0D);
1044        /* SIGNATURE        = (port_base+0x0E); */
1045        /* CONFIG6          = (port_base+0x0F); */
1046}
1047
1048MODULE_LICENSE("GPL");
1049
1050/* NOTE:  scatter-gather support only works in PIO mode.
1051 * Use SG_NONE if DMA mode is enabled!
1052 */
1053
1054static struct scsi_host_template driver_template =
1055{
1056     .proc_name                 = "NCR53c406a"          /* proc_name */,        
1057     .name                      = "NCR53c406a"          /* name */,             
1058     .detect                    = NCR53c406a_detect     /* detect */,           
1059     .release                   = NCR53c406a_release,
1060     .info                      = NCR53c406a_info               /* info */,             
1061     .queuecommand              = NCR53c406a_queue      /* queuecommand */,     
1062     .eh_host_reset_handler     = NCR53c406a_host_reset /* reset */,            
1063     .bios_param                = NCR53c406a_biosparm   /* biosparm */,         
1064     .can_queue                 = 1                     /* can_queue */,        
1065     .this_id                   = 7                     /* SCSI ID of the chip */,
1066     .sg_tablesize              = 32                    /*SG_ALL*/ /*SG_NONE*/, 
1067     .cmd_per_lun               = 1                     /* commands per lun */, 
1068     .unchecked_isa_dma         = 1                     /* unchecked_isa_dma */,
1069     .use_clustering            = ENABLE_CLUSTERING,
1070};
1071
1072#include "scsi_module.c"
1073
1074/*
1075 * Overrides for Emacs so that we get a uniform tabbing style.
1076 * Emacs will notice this stuff at the end of the file and automatically
1077 * adjust the settings for this buffer only.  This must remain at the end
1078 * of the file.
1079 * ---------------------------------------------------------------------------
1080 * Local variables:
1081 * c-indent-level: 4
1082 * c-brace-imaginary-offset: 0
1083 * c-brace-offset: -4
1084 * c-argdecl-indent: 4
1085 * c-label-offset: -4
1086 * c-continued-statement-offset: 4
1087 * c-continued-brace-offset: 0
1088 * indent-tabs-mode: nil
1089 * tab-width: 8
1090 * End:
1091 */
1092