linux/drivers/scsi/libsas/sas_internal.h
<<
>>
Prefs
   1/*
   2 * Serial Attached SCSI (SAS) class internal header file
   3 *
   4 * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
   6 *
   7 * This file is licensed under GPLv2.
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License as
  11 * published by the Free Software Foundation; either version 2 of the
  12 * License, or (at your option) any later version.
  13 *
  14 * This program is distributed in the hope that it will be useful, but
  15 * WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17 * General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  22 * USA
  23 *
  24 */
  25
  26#ifndef _SAS_INTERNAL_H_
  27#define _SAS_INTERNAL_H_
  28
  29#include <scsi/scsi.h>
  30#include <scsi/scsi_host.h>
  31#include <scsi/scsi_transport_sas.h>
  32#include <scsi/libsas.h>
  33
  34#define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
  35
  36#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)
  37
  38#define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
  39#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
  40
  41void sas_scsi_recover_host(struct Scsi_Host *shost);
  42
  43int sas_show_class(enum sas_class class, char *buf);
  44int sas_show_proto(enum sas_protocol proto, char *buf);
  45int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
  46int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
  47
  48int  sas_register_phys(struct sas_ha_struct *sas_ha);
  49void sas_unregister_phys(struct sas_ha_struct *sas_ha);
  50
  51int  sas_register_ports(struct sas_ha_struct *sas_ha);
  52void sas_unregister_ports(struct sas_ha_struct *sas_ha);
  53
  54enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
  55
  56int  sas_init_queue(struct sas_ha_struct *sas_ha);
  57int  sas_init_events(struct sas_ha_struct *sas_ha);
  58void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
  59
  60void sas_deform_port(struct asd_sas_phy *phy, int gone);
  61
  62void sas_porte_bytes_dmaed(struct work_struct *work);
  63void sas_porte_broadcast_rcvd(struct work_struct *work);
  64void sas_porte_link_reset_err(struct work_struct *work);
  65void sas_porte_timer_event(struct work_struct *work);
  66void sas_porte_hard_reset(struct work_struct *work);
  67
  68int sas_notify_lldd_dev_found(struct domain_device *);
  69void sas_notify_lldd_dev_gone(struct domain_device *);
  70
  71int sas_smp_phy_control(struct domain_device *dev, int phy_id,
  72                        enum phy_func phy_func, struct sas_phy_linkrates *);
  73int sas_smp_get_phy_events(struct sas_phy *phy);
  74
  75struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
  76
  77void sas_hae_reset(struct work_struct *work);
  78
  79#ifdef CONFIG_SCSI_SAS_HOST_SMP
  80extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
  81                                struct request *rsp);
  82#else
  83static inline int sas_smp_host_handler(struct Scsi_Host *shost,
  84                                       struct request *req,
  85                                       struct request *rsp)
  86{
  87        shost_printk(KERN_ERR, shost,
  88                "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
  89        return -EINVAL;
  90}
  91#endif
  92
  93static inline void sas_queue_event(int event, spinlock_t *lock,
  94                                   unsigned long *pending,
  95                                   struct work_struct *work,
  96                                   struct sas_ha_struct *sas_ha)
  97{
  98        unsigned long flags;
  99
 100        spin_lock_irqsave(lock, flags);
 101        if (test_bit(event, pending)) {
 102                spin_unlock_irqrestore(lock, flags);
 103                return;
 104        }
 105        __set_bit(event, pending);
 106        spin_unlock_irqrestore(lock, flags);
 107
 108        spin_lock_irqsave(&sas_ha->state_lock, flags);
 109        if (sas_ha->state != SAS_HA_UNREGISTERED) {
 110                scsi_queue_work(sas_ha->core.shost, work);
 111        }
 112        spin_unlock_irqrestore(&sas_ha->state_lock, flags);
 113}
 114
 115static inline void sas_begin_event(int event, spinlock_t *lock,
 116                                   unsigned long *pending)
 117{
 118        unsigned long flags;
 119
 120        spin_lock_irqsave(lock, flags);
 121        __clear_bit(event, pending);
 122        spin_unlock_irqrestore(lock, flags);
 123}
 124
 125static inline void sas_fill_in_rphy(struct domain_device *dev,
 126                                    struct sas_rphy *rphy)
 127{
 128        rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
 129        rphy->identify.initiator_port_protocols = dev->iproto;
 130        rphy->identify.target_port_protocols = dev->tproto;
 131        switch (dev->dev_type) {
 132        case SATA_DEV:
 133                /* FIXME: need sata device type */
 134        case SAS_END_DEV:
 135                rphy->identify.device_type = SAS_END_DEVICE;
 136                break;
 137        case EDGE_DEV:
 138                rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
 139                break;
 140        case FANOUT_DEV:
 141                rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
 142                break;
 143        default:
 144                rphy->identify.device_type = SAS_PHY_UNUSED;
 145                break;
 146        }
 147}
 148
 149static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
 150{
 151        struct expander_device *ex = &dev->ex_dev;
 152        struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
 153
 154        if (!ex->parent_port) {
 155                ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
 156                /* FIXME: error handling */
 157                BUG_ON(!ex->parent_port);
 158                BUG_ON(sas_port_add(ex->parent_port));
 159                sas_port_mark_backlink(ex->parent_port);
 160        }
 161        sas_port_add_phy(ex->parent_port, ex_phy->phy);
 162}
 163
 164#endif /* _SAS_INTERNAL_H_ */
 165