1# Backward compatibility 2asflags-y += $(EXTRA_AFLAGS) 3ccflags-y += $(EXTRA_CFLAGS) 4cppflags-y += $(EXTRA_CPPFLAGS) 5ldflags-y += $(EXTRA_LDFLAGS) 6 7# 8# flags that take effect in sub directories 9export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y) 10export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y) 11 12# Figure out what we need to build from the various variables 13# =========================================================================== 14 15# When an object is listed to be built compiled-in and modular, 16# only build the compiled-in version 17 18obj-m := $(filter-out $(obj-y),$(obj-m)) 19 20# Libraries are always collected in one lib file. 21# Filter out objects already built-in 22 23lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m))) 24 25 26# Handle objects in subdirs 27# --------------------------------------------------------------------------- 28# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o 29# and add the directory to the list of dirs to descend into: $(subdir-y) 30# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 31# and add the directory to the list of dirs to descend into: $(subdir-m) 32 33# Determine modorder. 34# Unfortunately, we don't have information about ordering between -y 35# and -m subdirs. Just put -y's first. 36modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko)) 37 38__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) 39subdir-y += $(__subdir-y) 40__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) 41subdir-m += $(__subdir-m) 42obj-y := $(patsubst %/, %/built-in.o, $(obj-y)) 43obj-m := $(filter-out %/, $(obj-m)) 44 45# Subdirectories we need to descend into 46 47subdir-ym := $(sort $(subdir-y) $(subdir-m)) 48 49# if $(foo-objs) exists, foo.o is a composite object 50multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) 51multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m)))) 52multi-used := $(multi-used-y) $(multi-used-m) 53single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m))) 54 55# Build list of the parts of our composite objects, our composite 56# objects depend on those (obviously) 57multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y))) 58multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y))) 59multi-objs := $(multi-objs-y) $(multi-objs-m) 60 61# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to 62# tell kbuild to descend 63subdir-obj-y := $(filter %/built-in.o, $(obj-y)) 64 65# $(obj-dirs) is a list of directories that contain object files 66obj-dirs := $(dir $(multi-objs) $(subdir-obj-y)) 67 68# Replace multi-part objects by their individual parts, look at local dir only 69real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y) 70real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) 71 72# Add subdir path 73 74extra-y := $(addprefix $(obj)/,$(extra-y)) 75always := $(addprefix $(obj)/,$(always)) 76targets := $(addprefix $(obj)/,$(targets)) 77modorder := $(addprefix $(obj)/,$(modorder)) 78obj-y := $(addprefix $(obj)/,$(obj-y)) 79obj-m := $(addprefix $(obj)/,$(obj-m)) 80lib-y := $(addprefix $(obj)/,$(lib-y)) 81subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y)) 82real-objs-y := $(addprefix $(obj)/,$(real-objs-y)) 83real-objs-m := $(addprefix $(obj)/,$(real-objs-m)) 84single-used-m := $(addprefix $(obj)/,$(single-used-m)) 85multi-used-y := $(addprefix $(obj)/,$(multi-used-y)) 86multi-used-m := $(addprefix $(obj)/,$(multi-used-m)) 87multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y)) 88multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m)) 89subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) 90obj-dirs := $(addprefix $(obj)/,$(obj-dirs)) 91 92# These flags are needed for modversions and compiling, so we define them here 93# already 94# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 95# end up in (or would, if it gets compiled in) 96# Note: It's possible that one object gets potentially linked into more 97# than one module. In that case KBUILD_MODNAME will be set to foo_bar, 98# where foo and bar are the name of the modules. 99name-fix = $(subst $(comma),_,$(subst -,_,$1)) 100basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" 101modname_flags = $(if $(filter 1,$(words $(modname))),\ 102 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") 103 104orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ 105 $(ccflags-y) $(CFLAGS_$(basetarget).o) 106_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) 107_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \ 108 $(asflags-y) $(AFLAGS_$(basetarget).o) 109_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) 110 111# 112# Enable gcov profiling flags for a file, directory or for all files depending 113# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL 114# (in this order) 115# 116ifeq ($(CONFIG_GCOV_KERNEL),y) 117_c_flags += $(if $(patsubst n%,, \ 118 $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \ 119 $(CFLAGS_GCOV)) 120endif 121 122ifdef CONFIG_SYMBOL_PREFIX 123_sym_flags = -DSYMBOL_PREFIX=$(patsubst "%",%,$(CONFIG_SYMBOL_PREFIX)) 124_cpp_flags += $(_sym_flags) 125_a_flags += $(_sym_flags) 126endif 127 128 129# If building the kernel in a separate objtree expand all occurrences 130# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/'). 131 132ifeq ($(KBUILD_SRC),) 133__c_flags = $(_c_flags) 134__a_flags = $(_a_flags) 135__cpp_flags = $(_cpp_flags) 136else 137 138# -I$(obj) locates generated .h files 139# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files 140# and locates generated .h files 141# FIXME: Replace both with specific CFLAGS* statements in the makefiles 142__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags) 143__a_flags = $(call flags,_a_flags) 144__cpp_flags = $(call flags,_cpp_flags) 145endif 146 147c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 148 $(__c_flags) $(modkern_cflags) \ 149 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) 150 151a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 152 $(__a_flags) $(modkern_aflags) 153 154cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) \ 155 $(__cpp_flags) 156 157ld_flags = $(LDFLAGS) $(ldflags-y) 158 159# Finds the multi-part object the current object will be linked into 160modname-multi = $(sort $(foreach m,$(multi-used),\ 161 $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=)))) 162 163ifdef REGENERATE_PARSERS 164 165# GPERF 166# --------------------------------------------------------------------------- 167quiet_cmd_gperf = GPERF $@ 168 cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $< 169 170$(src)/%.hash.c_shipped: $(src)/%.gperf 171 $(call cmd,gperf) 172 173# LEX 174# --------------------------------------------------------------------------- 175LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy) 176 177quiet_cmd_flex = LEX $@ 178 cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $< 179 180$(src)/%.lex.c_shipped: $(src)/%.l 181 $(call cmd,flex) 182 183# YACC 184# --------------------------------------------------------------------------- 185YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy) 186 187quiet_cmd_bison = YACC $@ 188 cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $< 189 190$(src)/%.tab.c_shipped: $(src)/%.y 191 $(call cmd,bison) 192 193quiet_cmd_bison_h = YACC $@ 194 cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $< 195 196$(src)/%.tab.h_shipped: $(src)/%.y 197 $(call cmd,bison_h) 198 199endif 200 201# Shipped files 202# =========================================================================== 203 204quiet_cmd_shipped = SHIPPED $@ 205cmd_shipped = cat $< > $@ 206 207$(obj)/%: $(src)/%_shipped 208 $(call cmd,shipped) 209 210# Commands useful for building a boot image 211# =========================================================================== 212# 213# Use as following: 214# 215# target: source(s) FORCE 216# $(if_changed,ld/objcopy/gzip) 217# 218# and add target to extra-y so that we know we have to 219# read in the saved command line 220 221# Linking 222# --------------------------------------------------------------------------- 223 224quiet_cmd_ld = LD $@ 225cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \ 226 $(filter-out FORCE,$^) -o $@ 227 228# Objcopy 229# --------------------------------------------------------------------------- 230 231quiet_cmd_objcopy = OBJCOPY $@ 232cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ 233 234# Gzip 235# --------------------------------------------------------------------------- 236 237quiet_cmd_gzip = GZIP $@ 238cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \ 239 (rm -f $@ ; false) 240 241# DTC 242# --------------------------------------------------------------------------- 243 244# Generate an assembly file to wrap the output of the device tree compiler 245quiet_cmd_dt_S_dtb= DTB $@ 246cmd_dt_S_dtb= \ 247( \ 248 echo '\#include <asm-generic/vmlinux.lds.h>'; \ 249 echo '.section .dtb.init.rodata,"a"'; \ 250 echo '.balign STRUCT_ALIGNMENT'; \ 251 echo '.global __dtb_$(*F)_begin'; \ 252 echo '__dtb_$(*F)_begin:'; \ 253 echo '.incbin "$<" '; \ 254 echo '__dtb_$(*F)_end:'; \ 255 echo '.global __dtb_$(*F)_end'; \ 256 echo '.balign STRUCT_ALIGNMENT'; \ 257) > $@ 258 259$(obj)/%.dtb.S: $(obj)/%.dtb 260 $(call cmd,dt_S_dtb) 261 262quiet_cmd_dtc = DTC $@ 263cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) $< 264 265# Bzip2 266# --------------------------------------------------------------------------- 267 268# Bzip2 and LZMA do not include size in file... so we have to fake that; 269# append the size as a 32-bit littleendian number as gzip does. 270size_append = printf $(shell \ 271dec_size=0; \ 272for F in $1; do \ 273 fsize=$$(stat -c "%s" $$F); \ 274 dec_size=$$(expr $$dec_size + $$fsize); \ 275done; \ 276printf "%08x\n" $$dec_size | \ 277 sed 's/\(..\)/\1 /g' | { \ 278 read ch0 ch1 ch2 ch3; \ 279 for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \ 280 printf '%s%03o' '\\' $$((0x$$ch)); \ 281 done; \ 282 } \ 283) 284 285quiet_cmd_bzip2 = BZIP2 $@ 286cmd_bzip2 = (cat $(filter-out FORCE,$^) | \ 287 bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 288 (rm -f $@ ; false) 289 290# Lzma 291# --------------------------------------------------------------------------- 292 293quiet_cmd_lzma = LZMA $@ 294cmd_lzma = (cat $(filter-out FORCE,$^) | \ 295 lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 296 (rm -f $@ ; false) 297 298quiet_cmd_lzo = LZO $@ 299cmd_lzo = (cat $(filter-out FORCE,$^) | \ 300 lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 301 (rm -f $@ ; false) 302 303# XZ 304# --------------------------------------------------------------------------- 305# Use xzkern to compress the kernel image and xzmisc to compress other things. 306# 307# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage 308# of the kernel decompressor. A BCJ filter is used if it is available for 309# the target architecture. xzkern also appends uncompressed size of the data 310# using size_append. The .xz format has the size information available at 311# the end of the file too, but it's in more complex format and it's good to 312# avoid changing the part of the boot code that reads the uncompressed size. 313# Note that the bytes added by size_append will make the xz tool think that 314# the file is corrupt. This is expected. 315# 316# xzmisc doesn't use size_append, so it can be used to create normal .xz 317# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very 318# big dictionary would increase the memory usage too much in the multi-call 319# decompression mode. A BCJ filter isn't used either. 320quiet_cmd_xzkern = XZKERN $@ 321cmd_xzkern = (cat $(filter-out FORCE,$^) | \ 322 sh $(srctree)/scripts/xz_wrap.sh && \ 323 $(call size_append, $(filter-out FORCE,$^))) > $@ || \ 324 (rm -f $@ ; false) 325 326quiet_cmd_xzmisc = XZMISC $@ 327cmd_xzmisc = (cat $(filter-out FORCE,$^) | \ 328 xz --check=crc32 --lzma2=dict=1MiB) > $@ || \ 329 (rm -f $@ ; false) 330 331# misc stuff 332# --------------------------------------------------------------------------- 333quote:=" 334