/*
 * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>

#include <asm/errno.h>
#include <asm/irq_regs.h>
#include <asm/signal.h>
#include <asm/io.h>

#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>

#include <asm/sibyte/sb1250_uart.h>
#include <asm/sibyte/sb1250.h>

/*
 * These are the routines that handle all the low level interrupt stuff.
 * Actions handled here are: initialization of the interrupt map, requesting of
 * interrupt lines by handlers, dispatching if interrupts to handlers, probing
 * for interrupt lines
 */

#ifdef CONFIG_PCI
extern unsigned long ht_eoi_space;
#endif

/* Store the CPU id (not the logical number) */
int bcm1480_irq_owner[BCM1480_NR_IRQS];

static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock);

void bcm1480_mask_irq(int cpu, int irq)
{
        unsigned long flags, hl_spacing;
        u64 cur_ints;

        raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
        hl_spacing = 0;
        if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
                hl_spacing = BCM1480_IMR_HL_SPACING;
                irq -= BCM1480_NR_IRQS_HALF;
        }
        cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
        cur_ints |= (((u64) 1) << irq);
        ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
        raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}

void bcm1480_unmask_irq(int cpu, int irq)
{
        unsigned long flags, hl_spacing;
        u64 cur_ints;

        raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
        hl_spacing = 0;
        if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
                hl_spacing = BCM1480_IMR_HL_SPACING;
                irq -= BCM1480_NR_IRQS_HALF;
        }
        cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
        cur_ints &= ~(((u64) 1) << irq);
        ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
        raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}

#ifdef CONFIG_SMP
static int bcm1480_set_affinity(struct irq_data *d, const struct cpumask *mask,
                                bool force)
{
        unsigned int irq_dirty, irq = d->irq;
        int i = 0, old_cpu, cpu, int_on, k;
        u64 cur_ints;
        unsigned long flags;

        i = cpumask_first(mask);

        /* Convert logical CPU to physical CPU */
        cpu = cpu_logical_map(i);

        /* Protect against other affinity changers and IMR manipulation */
        raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);

        /* Swizzle each CPU's IMR (but leave the IP selection alone) */
        old_cpu = bcm1480_irq_owner[irq];
        irq_dirty = irq;
        if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
                irq_dirty -= BCM1480_NR_IRQS_HALF;
        }

        for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
                cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
                int_on = !(cur_ints & (((u64) 1) << irq_dirty));
                if (int_on) {
                        /* If it was on, mask it */
                        cur_ints |= (((u64) 1) << irq_dirty);
                        ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
                }
                bcm1480_irq_owner[irq] = cpu;
                if (int_on) {
                        /* unmask for the new CPU */
                        cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
                        cur_ints &= ~(((u64) 1) << irq_dirty);
                        ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
                }
        }
        raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);

        return 0;
}
#endif


/*****************************************************************************/

static void disable_bcm1480_irq(struct irq_data *d)
{
        unsigned int irq = d->irq;

        bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
}

static void enable_bcm1480_irq(struct irq_data *d)
{
        unsigned int irq = d->irq;

        bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
}


static void ack_bcm1480_irq(struct irq_data *d)
{
        unsigned int irq_dirty, irq = d->irq;
        u64 pending;
        int k;

        /*
         * If the interrupt was an HT interrupt, now is the time to
         * clear it.  NOTE: we assume the HT bridge was set up to
         * deliver the interrupts to all CPUs (which makes affinity
         * changing easier for us)
         */
        irq_dirty = irq;
        if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
                irq_dirty -= BCM1480_NR_IRQS_HALF;
        }
        for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
                pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
                                                R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
                pending &= ((u64)1 << (irq_dirty));
                if (pending) {
#ifdef CONFIG_SMP
                        int i;
                        for (i=0; i<NR_CPUS; i++) {
                                /*
                                 * Clear for all CPUs so an affinity switch
                                 * doesn't find an old status
                                 */
                                __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
                                                                R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
                        }
#else
                        __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
#endif

                        /*
                         * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
                         * Pass 2, the LDT world may be edge-triggered, but
                         * this EOI shouldn't hurt.  If they are
                         * level-sensitive, the EOI is required.
                         */
#ifdef CONFIG_PCI
                        if (ht_eoi_space)
                                *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
#endif
                }
        }
        bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
}

static struct irq_chip bcm1480_irq_type = {
        .name = "BCM1480-IMR",
        .irq_mask_ack = ack_bcm1480_irq,
        .irq_mask = disable_bcm1480_irq,
        .irq_unmask = enable_bcm1480_irq,
#ifdef CONFIG_SMP
        .irq_set_affinity = bcm1480_set_affinity
#endif
};

void __init init_bcm1480_irqs(void)
{
        int i;

        for (i = 0; i < BCM1480_NR_IRQS; i++) {
                irq_set_chip_and_handler(i, &bcm1480_irq_type,
                                         handle_level_irq);
                bcm1480_irq_owner[i] = 0;
        }
}

/*
 *  init_IRQ is called early in the boot sequence from init/main.c.  It
 *  is responsible for setting up the interrupt mapper and installing the
 *  handler that will be responsible for dispatching interrupts to the
 *  "right" place.
 */
/*
 * For now, map all interrupts to IP[2].  We could save
 * some cycles by parceling out system interrupts to different
 * IP lines, but keep it simple for bringup.  We'll also direct
 * all interrupts to a single CPU; we should probably route
 * PCI and LDT to one cpu and everything else to the other
 * to balance the load a bit.
 *
 * On the second cpu, everything is set to IP5, which is
 * ignored, EXCEPT the mailbox interrupt.  That one is
 * set to IP[2] so it is handled.  This is needed so we
 * can do cross-cpu function calls, as required by SMP
 */

#define IMR_IP2_VAL     K_BCM1480_INT_MAP_I0
#define IMR_IP3_VAL     K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL     K_BCM1480_INT_MAP_I2
#define IMR_IP5_VAL     K_BCM1480_INT_MAP_I3
#define IMR_IP6_VAL     K_BCM1480_INT_MAP_I4

void __init arch_init_irq(void)
{
        unsigned int i, cpu;
        u64 tmp;
        unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
                STATUSF_IP1 | STATUSF_IP0;

        /* Default everything to IP2 */
        /* Start with _high registers which has no bit 0 interrupt source */
        for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) {    /* was I0 */
                for (cpu = 0; cpu < 4; cpu++) {
                        __raw_writeq(IMR_IP2_VAL,
                                     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
                                                                   R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
                }
        }

        /* Now do _low registers */
        for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
                for (cpu = 0; cpu < 4; cpu++) {
                        __raw_writeq(IMR_IP2_VAL,
                                     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
                                                                   R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
                }
        }

        init_bcm1480_irqs();

        /*
         * Map the high 16 bits of mailbox_0 registers to IP[3], for
         * inter-cpu messages
         */
        /* Was I1 */
        for (cpu = 0; cpu < 4; cpu++) {
                __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
                                                 (K_BCM1480_INT_MBOX_0_0 << 3)));
        }


        /* Clear the mailboxes.  The firmware may leave them dirty */
        for (cpu = 0; cpu < 4; cpu++) {
                __raw_writeq(0xffffffffffffffffULL,
                             IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
                __raw_writeq(0xffffffffffffffffULL,
                             IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
        }


        /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
        tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
        for (cpu = 0; cpu < 4; cpu++) {
                __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
        }
        tmp = ~((u64) 0);
        for (cpu = 0; cpu < 4; cpu++) {
                __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
        }

        /*
         * Note that the timer interrupts are also mapped, but this is
         * done in bcm1480_time_init().  Also, the profiling driver
         * does its own management of IP7.
         */

        /* Enable necessary IPs, disable the rest */
        change_c0_status(ST0_IM, imask);
}

extern void bcm1480_mailbox_interrupt(void);

static inline void dispatch_ip2(void)
{
        unsigned long long mask_h, mask_l;
        unsigned int cpu = smp_processor_id();
        unsigned long base;

        /*
         * Default...we've hit an IP[2] interrupt, which means we've got to
         * check the 1480 interrupt registers to figure out what to do.  Need
         * to detect which CPU we're on, now that smp_affinity is supported.
         */
        base = A_BCM1480_IMR_MAPPER(cpu);
        mask_h = __raw_readq(
                IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
        mask_l = __raw_readq(
                IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));

        if (mask_h) {
                if (mask_h ^ 1)
                        do_IRQ(fls64(mask_h) - 1);
                else if (mask_l)
                        do_IRQ(63 + fls64(mask_l));
        }
}

asmlinkage void plat_irq_dispatch(void)
{
        unsigned int cpu = smp_processor_id();
        unsigned int pending;

#ifdef CONFIG_SIBYTE_BCM1480_PROF
        /* Set compare to count to silence count/compare timer interrupts */
        write_c0_compare(read_c0_count());
#endif

        pending = read_c0_cause() & read_c0_status();

#ifdef CONFIG_SIBYTE_BCM1480_PROF
        if (pending & CAUSEF_IP7)       /* Cpu performance counter interrupt */
                sbprof_cpu_intr();
        else
#endif

        if (pending & CAUSEF_IP4)
                do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
#ifdef CONFIG_SMP
        else if (pending & CAUSEF_IP3)
                bcm1480_mailbox_interrupt();
#endif

        else if (pending & CAUSEF_IP2)
                dispatch_ip2();
}