/*
 * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>

#include <asm/errno.h>
#include <asm/signal.h>
#include <asm/time.h>
#include <asm/io.h>

#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_uart.h>
#include <asm/sibyte/sb1250_scd.h>
#include <asm/sibyte/sb1250.h>

/*
 * These are the routines that handle all the low level interrupt stuff.
 * Actions handled here are: initialization of the interrupt map, requesting of
 * interrupt lines by handlers, dispatching if interrupts to handlers, probing
 * for interrupt lines
 */

#ifdef CONFIG_SIBYTE_HAS_LDT
extern unsigned long ldt_eoi_space;
#endif

/* Store the CPU id (not the logical number) */
int sb1250_irq_owner[SB1250_NR_IRQS];

static DEFINE_RAW_SPINLOCK(sb1250_imr_lock);

void sb1250_mask_irq(int cpu, int irq)
{
        unsigned long flags;
        u64 cur_ints;

        raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
        cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
                                        R_IMR_INTERRUPT_MASK));
        cur_ints |= (((u64) 1) << irq);
        ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
                                        R_IMR_INTERRUPT_MASK));
        raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}

void sb1250_unmask_irq(int cpu, int irq)
{
        unsigned long flags;
        u64 cur_ints;

        raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
        cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
                                        R_IMR_INTERRUPT_MASK));
        cur_ints &= ~(((u64) 1) << irq);
        ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
                                        R_IMR_INTERRUPT_MASK));
        raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}

#ifdef CONFIG_SMP
static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask,
                               bool force)
{
        int i = 0, old_cpu, cpu, int_on;
        unsigned int irq = d->irq;
        u64 cur_ints;
        unsigned long flags;

        i = cpumask_first(mask);

        /* Convert logical CPU to physical CPU */
        cpu = cpu_logical_map(i);

        /* Protect against other affinity changers and IMR manipulation */
        raw_spin_lock_irqsave(&sb1250_imr_lock, flags);

        /* Swizzle each CPU's IMR (but leave the IP selection alone) */
        old_cpu = sb1250_irq_owner[irq];
        cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
                                        R_IMR_INTERRUPT_MASK));
        int_on = !(cur_ints & (((u64) 1) << irq));
        if (int_on) {
                /* If it was on, mask it */
                cur_ints |= (((u64) 1) << irq);
                ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
                                        R_IMR_INTERRUPT_MASK));
        }
        sb1250_irq_owner[irq] = cpu;
        if (int_on) {
                /* unmask for the new CPU */
                cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
                                        R_IMR_INTERRUPT_MASK));
                cur_ints &= ~(((u64) 1) << irq);
                ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
                                        R_IMR_INTERRUPT_MASK));
        }
        raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);

        return 0;
}
#endif

static void disable_sb1250_irq(struct irq_data *d)
{
        unsigned int irq = d->irq;

        sb1250_mask_irq(sb1250_irq_owner[irq], irq);
}

static void enable_sb1250_irq(struct irq_data *d)
{
        unsigned int irq = d->irq;

        sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
}


static void ack_sb1250_irq(struct irq_data *d)
{
        unsigned int irq = d->irq;
#ifdef CONFIG_SIBYTE_HAS_LDT
        u64 pending;

        /*
         * If the interrupt was an HT interrupt, now is the time to
         * clear it.  NOTE: we assume the HT bridge was set up to
         * deliver the interrupts to all CPUs (which makes affinity
         * changing easier for us)
         */
        pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
                                                    R_IMR_LDT_INTERRUPT)));
        pending &= ((u64)1 << (irq));
        if (pending) {
                int i;
                for (i=0; i<NR_CPUS; i++) {
                        int cpu;
#ifdef CONFIG_SMP
                        cpu = cpu_logical_map(i);
#else
                        cpu = i;
#endif
                        /*
                         * Clear for all CPUs so an affinity switch
                         * doesn't find an old status
                         */
                        __raw_writeq(pending,
                                     IOADDR(A_IMR_REGISTER(cpu,
                                                R_IMR_LDT_INTERRUPT_CLR)));
                }

                /*
                 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
                 * Pass 2, the LDT world may be edge-triggered, but
                 * this EOI shouldn't hurt.  If they are
                 * level-sensitive, the EOI is required.
                 */
                *(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
        }
#endif
        sb1250_mask_irq(sb1250_irq_owner[irq], irq);
}

static struct irq_chip sb1250_irq_type = {
        .name = "SB1250-IMR",
        .irq_mask_ack = ack_sb1250_irq,
        .irq_unmask = enable_sb1250_irq,
        .irq_mask = disable_sb1250_irq,
#ifdef CONFIG_SMP
        .irq_set_affinity = sb1250_set_affinity
#endif
};

void __init init_sb1250_irqs(void)
{
        int i;

        for (i = 0; i < SB1250_NR_IRQS; i++) {
                irq_set_chip_and_handler(i, &sb1250_irq_type,
                                         handle_level_irq);
                sb1250_irq_owner[i] = 0;
        }
}


/*
 *  arch_init_irq is called early in the boot sequence from init/main.c via
 *  init_IRQ.  It is responsible for setting up the interrupt mapper and
 *  installing the handler that will be responsible for dispatching interrupts
 *  to the "right" place.
 */
/*
 * For now, map all interrupts to IP[2].  We could save
 * some cycles by parceling out system interrupts to different
 * IP lines, but keep it simple for bringup.  We'll also direct
 * all interrupts to a single CPU; we should probably route
 * PCI and LDT to one cpu and everything else to the other
 * to balance the load a bit.
 *
 * On the second cpu, everything is set to IP5, which is
 * ignored, EXCEPT the mailbox interrupt.  That one is
 * set to IP[2] so it is handled.  This is needed so we
 * can do cross-cpu function calls, as required by SMP
 */

#define IMR_IP2_VAL     K_INT_MAP_I0
#define IMR_IP3_VAL     K_INT_MAP_I1
#define IMR_IP4_VAL     K_INT_MAP_I2
#define IMR_IP5_VAL     K_INT_MAP_I3
#define IMR_IP6_VAL     K_INT_MAP_I4

void __init arch_init_irq(void)
{

        unsigned int i;
        u64 tmp;
        unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
                STATUSF_IP1 | STATUSF_IP0;

        /* Default everything to IP2 */
        for (i = 0; i < SB1250_NR_IRQS; i++) {  /* was I0 */
                __raw_writeq(IMR_IP2_VAL,
                             IOADDR(A_IMR_REGISTER(0,
                                                   R_IMR_INTERRUPT_MAP_BASE) +
                                    (i << 3)));
                __raw_writeq(IMR_IP2_VAL,
                             IOADDR(A_IMR_REGISTER(1,
                                                   R_IMR_INTERRUPT_MAP_BASE) +
                                    (i << 3)));
        }

        init_sb1250_irqs();

        /*
         * Map the high 16 bits of the mailbox registers to IP[3], for
         * inter-cpu messages
         */
        /* Was I1 */
        __raw_writeq(IMR_IP3_VAL,
                     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
                            (K_INT_MBOX_0 << 3)));
        __raw_writeq(IMR_IP3_VAL,
                     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
                            (K_INT_MBOX_0 << 3)));

        /* Clear the mailboxes.  The firmware may leave them dirty */
        __raw_writeq(0xffffffffffffffffULL,
                     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
        __raw_writeq(0xffffffffffffffffULL,
                     IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));

        /* Mask everything except the mailbox registers for both cpus */
        tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
        __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
        __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));

        /*
         * Note that the timer interrupts are also mapped, but this is
         * done in sb1250_time_init().  Also, the profiling driver
         * does its own management of IP7.
         */

        /* Enable necessary IPs, disable the rest */
        change_c0_status(ST0_IM, imask);
}

extern void sb1250_mailbox_interrupt(void);

static inline void dispatch_ip2(void)
{
        unsigned int cpu = smp_processor_id();
        unsigned long long mask;

        /*
         * Default...we've hit an IP[2] interrupt, which means we've got to
         * check the 1250 interrupt registers to figure out what to do.  Need
         * to detect which CPU we're on, now that smp_affinity is supported.
         */
        mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
                                  R_IMR_INTERRUPT_STATUS_BASE)));
        if (mask)
                do_IRQ(fls64(mask) - 1);
}

asmlinkage void plat_irq_dispatch(void)
{
        unsigned int cpu = smp_processor_id();
        unsigned int pending;

        /*
         * What a pain. We have to be really careful saving the upper 32 bits
         * of any * register across function calls if we don't want them
         * trashed--since were running in -o32, the calling routing never saves
         * the full 64 bits of a register across a function call.  Being the
         * interrupt handler, we're guaranteed that interrupts are disabled
         * during this code so we don't have to worry about random interrupts
         * blasting the high 32 bits.
         */

        pending = read_c0_cause() & read_c0_status() & ST0_IM;

        if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
                do_IRQ(MIPS_CPU_IRQ_BASE + 7);
        else if (pending & CAUSEF_IP4)
                do_IRQ(K_INT_TIMER_0 + cpu);    /* sb1250_timer_interrupt() */

#ifdef CONFIG_SMP
        else if (pending & CAUSEF_IP3)
                sb1250_mailbox_interrupt();
#endif

        else if (pending & CAUSEF_IP2)
                dispatch_ip2();
        else
                spurious_interrupt();
}