1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35#include <linux/module.h>
36#include <linux/init.h>
37#include <linux/slab.h>
38#include <linux/jiffies.h>
39#include <linux/i2c.h>
40#include <linux/hwmon.h>
41#include <linux/hwmon-sysfs.h>
42#include <linux/err.h>
43#include <linux/mutex.h>
44#include <linux/sysfs.h>
45
46
47static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
48
49enum chips { gl518sm_r00, gl518sm_r80 };
50
51
52
53
54#define GL518_REG_CHIP_ID 0x00
55#define GL518_REG_REVISION 0x01
56#define GL518_REG_VENDOR_ID 0x02
57#define GL518_REG_CONF 0x03
58#define GL518_REG_TEMP_IN 0x04
59#define GL518_REG_TEMP_MAX 0x05
60#define GL518_REG_TEMP_HYST 0x06
61#define GL518_REG_FAN_COUNT 0x07
62#define GL518_REG_FAN_LIMIT 0x08
63#define GL518_REG_VIN1_LIMIT 0x09
64#define GL518_REG_VIN2_LIMIT 0x0a
65#define GL518_REG_VIN3_LIMIT 0x0b
66#define GL518_REG_VDD_LIMIT 0x0c
67#define GL518_REG_VIN3 0x0d
68#define GL518_REG_MISC 0x0f
69#define GL518_REG_ALARM 0x10
70#define GL518_REG_MASK 0x11
71#define GL518_REG_INT 0x12
72#define GL518_REG_VIN2 0x13
73#define GL518_REG_VIN1 0x14
74#define GL518_REG_VDD 0x15
75
76
77
78
79
80
81
82
83
84#define RAW_FROM_REG(val) val
85
86#define BOOL_FROM_REG(val) ((val) ? 0 : 1)
87#define BOOL_TO_REG(val) ((val) ? 0 : 1)
88
89#define TEMP_TO_REG(val) clamp_val(((((val) < 0 ? \
90 (val) - 500 : \
91 (val) + 500) / 1000) + 119), 0, 255)
92#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
93
94static inline u8 FAN_TO_REG(long rpm, int div)
95{
96 long rpmdiv;
97 if (rpm == 0)
98 return 0;
99 rpmdiv = clamp_val(rpm, 1, 960000) * div;
100 return clamp_val((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
101}
102#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div))))
103
104#define IN_TO_REG(val) clamp_val((((val) + 9) / 19), 0, 255)
105#define IN_FROM_REG(val) ((val) * 19)
106
107#define VDD_TO_REG(val) clamp_val((((val) * 4 + 47) / 95), 0, 255)
108#define VDD_FROM_REG(val) (((val) * 95 + 2) / 4)
109
110#define DIV_FROM_REG(val) (1 << (val))
111
112#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
113#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
114
115
116struct gl518_data {
117 struct device *hwmon_dev;
118 enum chips type;
119
120 struct mutex update_lock;
121 char valid;
122 unsigned long last_updated;
123
124 u8 voltage_in[4];
125 u8 voltage_min[4];
126 u8 voltage_max[4];
127 u8 fan_in[2];
128 u8 fan_min[2];
129 u8 fan_div[2];
130 u8 fan_auto1;
131 u8 temp_in;
132 u8 temp_max;
133 u8 temp_hyst;
134 u8 alarms;
135 u8 alarm_mask;
136 u8 beep_mask;
137 u8 beep_enable;
138};
139
140static int gl518_probe(struct i2c_client *client,
141 const struct i2c_device_id *id);
142static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info);
143static void gl518_init_client(struct i2c_client *client);
144static int gl518_remove(struct i2c_client *client);
145static int gl518_read_value(struct i2c_client *client, u8 reg);
146static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
147static struct gl518_data *gl518_update_device(struct device *dev);
148
149static const struct i2c_device_id gl518_id[] = {
150 { "gl518sm", 0 },
151 { }
152};
153MODULE_DEVICE_TABLE(i2c, gl518_id);
154
155
156static struct i2c_driver gl518_driver = {
157 .class = I2C_CLASS_HWMON,
158 .driver = {
159 .name = "gl518sm",
160 },
161 .probe = gl518_probe,
162 .remove = gl518_remove,
163 .id_table = gl518_id,
164 .detect = gl518_detect,
165 .address_list = normal_i2c,
166};
167
168
169
170
171
172#define show(type, suffix, value) \
173static ssize_t show_##suffix(struct device *dev, \
174 struct device_attribute *attr, char *buf) \
175{ \
176 struct gl518_data *data = gl518_update_device(dev); \
177 return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
178}
179
180show(TEMP, temp_input1, temp_in);
181show(TEMP, temp_max1, temp_max);
182show(TEMP, temp_hyst1, temp_hyst);
183show(BOOL, fan_auto1, fan_auto1);
184show(VDD, in_input0, voltage_in[0]);
185show(IN, in_input1, voltage_in[1]);
186show(IN, in_input2, voltage_in[2]);
187show(IN, in_input3, voltage_in[3]);
188show(VDD, in_min0, voltage_min[0]);
189show(IN, in_min1, voltage_min[1]);
190show(IN, in_min2, voltage_min[2]);
191show(IN, in_min3, voltage_min[3]);
192show(VDD, in_max0, voltage_max[0]);
193show(IN, in_max1, voltage_max[1]);
194show(IN, in_max2, voltage_max[2]);
195show(IN, in_max3, voltage_max[3]);
196show(RAW, alarms, alarms);
197show(BOOL, beep_enable, beep_enable);
198show(BEEP_MASK, beep_mask, beep_mask);
199
200static ssize_t show_fan_input(struct device *dev,
201 struct device_attribute *attr, char *buf)
202{
203 int nr = to_sensor_dev_attr(attr)->index;
204 struct gl518_data *data = gl518_update_device(dev);
205 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
206 DIV_FROM_REG(data->fan_div[nr])));
207}
208
209static ssize_t show_fan_min(struct device *dev,
210 struct device_attribute *attr, char *buf)
211{
212 int nr = to_sensor_dev_attr(attr)->index;
213 struct gl518_data *data = gl518_update_device(dev);
214 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
215 DIV_FROM_REG(data->fan_div[nr])));
216}
217
218static ssize_t show_fan_div(struct device *dev,
219 struct device_attribute *attr, char *buf)
220{
221 int nr = to_sensor_dev_attr(attr)->index;
222 struct gl518_data *data = gl518_update_device(dev);
223 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
224}
225
226#define set(type, suffix, value, reg) \
227static ssize_t set_##suffix(struct device *dev, \
228 struct device_attribute *attr, \
229 const char *buf, size_t count) \
230{ \
231 struct i2c_client *client = to_i2c_client(dev); \
232 struct gl518_data *data = i2c_get_clientdata(client); \
233 long val; \
234 int err = kstrtol(buf, 10, &val); \
235 if (err) \
236 return err; \
237 \
238 mutex_lock(&data->update_lock); \
239 data->value = type##_TO_REG(val); \
240 gl518_write_value(client, reg, data->value); \
241 mutex_unlock(&data->update_lock); \
242 return count; \
243}
244
245#define set_bits(type, suffix, value, reg, mask, shift) \
246static ssize_t set_##suffix(struct device *dev, \
247 struct device_attribute *attr, \
248 const char *buf, size_t count) \
249{ \
250 struct i2c_client *client = to_i2c_client(dev); \
251 struct gl518_data *data = i2c_get_clientdata(client); \
252 int regvalue; \
253 unsigned long val; \
254 int err = kstrtoul(buf, 10, &val); \
255 if (err) \
256 return err; \
257 \
258 mutex_lock(&data->update_lock); \
259 regvalue = gl518_read_value(client, reg); \
260 data->value = type##_TO_REG(val); \
261 regvalue = (regvalue & ~mask) | (data->value << shift); \
262 gl518_write_value(client, reg, regvalue); \
263 mutex_unlock(&data->update_lock); \
264 return count; \
265}
266
267#define set_low(type, suffix, value, reg) \
268 set_bits(type, suffix, value, reg, 0x00ff, 0)
269#define set_high(type, suffix, value, reg) \
270 set_bits(type, suffix, value, reg, 0xff00, 8)
271
272set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
273set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
274set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
275set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
276set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
277set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
278set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
279set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
280set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
281set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
282set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
283set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
284set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
285
286static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
287 const char *buf, size_t count)
288{
289 struct i2c_client *client = to_i2c_client(dev);
290 struct gl518_data *data = i2c_get_clientdata(client);
291 int nr = to_sensor_dev_attr(attr)->index;
292 int regvalue;
293 unsigned long val;
294 int err;
295
296 err = kstrtoul(buf, 10, &val);
297 if (err)
298 return err;
299
300 mutex_lock(&data->update_lock);
301 regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
302 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
303 regvalue = (regvalue & (0xff << (8 * nr)))
304 | (data->fan_min[nr] << (8 * (1 - nr)));
305 gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
306
307 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
308 if (data->fan_min[nr] == 0)
309 data->alarm_mask &= ~(0x20 << nr);
310 else
311 data->alarm_mask |= (0x20 << nr);
312 data->beep_mask &= data->alarm_mask;
313 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
314
315 mutex_unlock(&data->update_lock);
316 return count;
317}
318
319static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
320 const char *buf, size_t count)
321{
322 struct i2c_client *client = to_i2c_client(dev);
323 struct gl518_data *data = i2c_get_clientdata(client);
324 int nr = to_sensor_dev_attr(attr)->index;
325 int regvalue;
326 unsigned long val;
327 int err;
328
329 err = kstrtoul(buf, 10, &val);
330 if (err)
331 return err;
332
333 switch (val) {
334 case 1:
335 val = 0;
336 break;
337 case 2:
338 val = 1;
339 break;
340 case 4:
341 val = 2;
342 break;
343 case 8:
344 val = 3;
345 break;
346 default:
347 dev_err(dev,
348 "Invalid fan clock divider %lu, choose one of 1, 2, 4 or 8\n",
349 val);
350 return -EINVAL;
351 }
352
353 mutex_lock(&data->update_lock);
354 regvalue = gl518_read_value(client, GL518_REG_MISC);
355 data->fan_div[nr] = val;
356 regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
357 | (data->fan_div[nr] << (6 - 2 * nr));
358 gl518_write_value(client, GL518_REG_MISC, regvalue);
359 mutex_unlock(&data->update_lock);
360 return count;
361}
362
363static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
364static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
365static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
366 show_temp_hyst1, set_temp_hyst1);
367static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
368static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
369static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
370static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO,
371 show_fan_min, set_fan_min, 0);
372static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO,
373 show_fan_min, set_fan_min, 1);
374static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO,
375 show_fan_div, set_fan_div, 0);
376static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO,
377 show_fan_div, set_fan_div, 1);
378static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
379static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
380static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
381static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
382static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
383static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
384static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
385static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
386static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
387static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
388static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
389static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
390static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
391static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
392 show_beep_enable, set_beep_enable);
393static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
394 show_beep_mask, set_beep_mask);
395
396static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
397 char *buf)
398{
399 int bitnr = to_sensor_dev_attr(attr)->index;
400 struct gl518_data *data = gl518_update_device(dev);
401 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
402}
403
404static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
405static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
406static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
407static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
408static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
409static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
410static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
411
412static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
413 char *buf)
414{
415 int bitnr = to_sensor_dev_attr(attr)->index;
416 struct gl518_data *data = gl518_update_device(dev);
417 return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
418}
419
420static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
421 const char *buf, size_t count)
422{
423 struct i2c_client *client = to_i2c_client(dev);
424 struct gl518_data *data = i2c_get_clientdata(client);
425 int bitnr = to_sensor_dev_attr(attr)->index;
426 unsigned long bit;
427 int err;
428
429 err = kstrtoul(buf, 10, &bit);
430 if (err)
431 return err;
432
433 if (bit & ~1)
434 return -EINVAL;
435
436 mutex_lock(&data->update_lock);
437 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
438 if (bit)
439 data->beep_mask |= (1 << bitnr);
440 else
441 data->beep_mask &= ~(1 << bitnr);
442 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
443 mutex_unlock(&data->update_lock);
444 return count;
445}
446
447static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 0);
448static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 1);
449static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 2);
450static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 3);
451static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 4);
452static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 5);
453static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 6);
454
455static struct attribute *gl518_attributes[] = {
456 &dev_attr_in3_input.attr,
457 &dev_attr_in0_min.attr,
458 &dev_attr_in1_min.attr,
459 &dev_attr_in2_min.attr,
460 &dev_attr_in3_min.attr,
461 &dev_attr_in0_max.attr,
462 &dev_attr_in1_max.attr,
463 &dev_attr_in2_max.attr,
464 &dev_attr_in3_max.attr,
465 &sensor_dev_attr_in0_alarm.dev_attr.attr,
466 &sensor_dev_attr_in1_alarm.dev_attr.attr,
467 &sensor_dev_attr_in2_alarm.dev_attr.attr,
468 &sensor_dev_attr_in3_alarm.dev_attr.attr,
469 &sensor_dev_attr_in0_beep.dev_attr.attr,
470 &sensor_dev_attr_in1_beep.dev_attr.attr,
471 &sensor_dev_attr_in2_beep.dev_attr.attr,
472 &sensor_dev_attr_in3_beep.dev_attr.attr,
473
474 &dev_attr_fan1_auto.attr,
475 &sensor_dev_attr_fan1_input.dev_attr.attr,
476 &sensor_dev_attr_fan2_input.dev_attr.attr,
477 &sensor_dev_attr_fan1_min.dev_attr.attr,
478 &sensor_dev_attr_fan2_min.dev_attr.attr,
479 &sensor_dev_attr_fan1_div.dev_attr.attr,
480 &sensor_dev_attr_fan2_div.dev_attr.attr,
481 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
482 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
483 &sensor_dev_attr_fan1_beep.dev_attr.attr,
484 &sensor_dev_attr_fan2_beep.dev_attr.attr,
485
486 &dev_attr_temp1_input.attr,
487 &dev_attr_temp1_max.attr,
488 &dev_attr_temp1_max_hyst.attr,
489 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
490 &sensor_dev_attr_temp1_beep.dev_attr.attr,
491
492 &dev_attr_alarms.attr,
493 &dev_attr_beep_enable.attr,
494 &dev_attr_beep_mask.attr,
495 NULL
496};
497
498static const struct attribute_group gl518_group = {
499 .attrs = gl518_attributes,
500};
501
502static struct attribute *gl518_attributes_r80[] = {
503 &dev_attr_in0_input.attr,
504 &dev_attr_in1_input.attr,
505 &dev_attr_in2_input.attr,
506 NULL
507};
508
509static const struct attribute_group gl518_group_r80 = {
510 .attrs = gl518_attributes_r80,
511};
512
513
514
515
516
517
518static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
519{
520 struct i2c_adapter *adapter = client->adapter;
521 int rev;
522
523 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
524 I2C_FUNC_SMBUS_WORD_DATA))
525 return -ENODEV;
526
527
528 if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
529 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
530 return -ENODEV;
531
532
533 rev = gl518_read_value(client, GL518_REG_REVISION);
534 if (rev != 0x00 && rev != 0x80)
535 return -ENODEV;
536
537 strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
538
539 return 0;
540}
541
542static int gl518_probe(struct i2c_client *client,
543 const struct i2c_device_id *id)
544{
545 struct gl518_data *data;
546 int err, revision;
547
548 data = devm_kzalloc(&client->dev, sizeof(struct gl518_data),
549 GFP_KERNEL);
550 if (!data)
551 return -ENOMEM;
552
553 i2c_set_clientdata(client, data);
554 revision = gl518_read_value(client, GL518_REG_REVISION);
555 data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
556 mutex_init(&data->update_lock);
557
558
559 data->alarm_mask = 0xff;
560 gl518_init_client(client);
561
562
563 err = sysfs_create_group(&client->dev.kobj, &gl518_group);
564 if (err)
565 return err;
566 if (data->type == gl518sm_r80) {
567 err = sysfs_create_group(&client->dev.kobj, &gl518_group_r80);
568 if (err)
569 goto exit_remove_files;
570 }
571
572 data->hwmon_dev = hwmon_device_register(&client->dev);
573 if (IS_ERR(data->hwmon_dev)) {
574 err = PTR_ERR(data->hwmon_dev);
575 goto exit_remove_files;
576 }
577
578 return 0;
579
580exit_remove_files:
581 sysfs_remove_group(&client->dev.kobj, &gl518_group);
582 if (data->type == gl518sm_r80)
583 sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
584 return err;
585}
586
587
588
589
590
591
592static void gl518_init_client(struct i2c_client *client)
593{
594
595 u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
596
597
598 gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
599
600
601 gl518_write_value(client, GL518_REG_MASK, 0x00);
602
603
604 gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
605 gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
606}
607
608static int gl518_remove(struct i2c_client *client)
609{
610 struct gl518_data *data = i2c_get_clientdata(client);
611
612 hwmon_device_unregister(data->hwmon_dev);
613 sysfs_remove_group(&client->dev.kobj, &gl518_group);
614 if (data->type == gl518sm_r80)
615 sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
616
617 return 0;
618}
619
620
621
622
623
624
625static int gl518_read_value(struct i2c_client *client, u8 reg)
626{
627 if ((reg >= 0x07) && (reg <= 0x0c))
628 return i2c_smbus_read_word_swapped(client, reg);
629 else
630 return i2c_smbus_read_byte_data(client, reg);
631}
632
633static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
634{
635 if ((reg >= 0x07) && (reg <= 0x0c))
636 return i2c_smbus_write_word_swapped(client, reg, value);
637 else
638 return i2c_smbus_write_byte_data(client, reg, value);
639}
640
641static struct gl518_data *gl518_update_device(struct device *dev)
642{
643 struct i2c_client *client = to_i2c_client(dev);
644 struct gl518_data *data = i2c_get_clientdata(client);
645 int val;
646
647 mutex_lock(&data->update_lock);
648
649 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
650 || !data->valid) {
651 dev_dbg(&client->dev, "Starting gl518 update\n");
652
653 data->alarms = gl518_read_value(client, GL518_REG_INT);
654 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
655
656 val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
657 data->voltage_min[0] = val & 0xff;
658 data->voltage_max[0] = (val >> 8) & 0xff;
659 val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
660 data->voltage_min[1] = val & 0xff;
661 data->voltage_max[1] = (val >> 8) & 0xff;
662 val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
663 data->voltage_min[2] = val & 0xff;
664 data->voltage_max[2] = (val >> 8) & 0xff;
665 val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
666 data->voltage_min[3] = val & 0xff;
667 data->voltage_max[3] = (val >> 8) & 0xff;
668
669 val = gl518_read_value(client, GL518_REG_FAN_COUNT);
670 data->fan_in[0] = (val >> 8) & 0xff;
671 data->fan_in[1] = val & 0xff;
672
673 val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
674 data->fan_min[0] = (val >> 8) & 0xff;
675 data->fan_min[1] = val & 0xff;
676
677 data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
678 data->temp_max =
679 gl518_read_value(client, GL518_REG_TEMP_MAX);
680 data->temp_hyst =
681 gl518_read_value(client, GL518_REG_TEMP_HYST);
682
683 val = gl518_read_value(client, GL518_REG_MISC);
684 data->fan_div[0] = (val >> 6) & 0x03;
685 data->fan_div[1] = (val >> 4) & 0x03;
686 data->fan_auto1 = (val >> 3) & 0x01;
687
688 data->alarms &= data->alarm_mask;
689
690 val = gl518_read_value(client, GL518_REG_CONF);
691 data->beep_enable = (val >> 2) & 1;
692
693 if (data->type != gl518sm_r00) {
694 data->voltage_in[0] =
695 gl518_read_value(client, GL518_REG_VDD);
696 data->voltage_in[1] =
697 gl518_read_value(client, GL518_REG_VIN1);
698 data->voltage_in[2] =
699 gl518_read_value(client, GL518_REG_VIN2);
700 }
701 data->voltage_in[3] =
702 gl518_read_value(client, GL518_REG_VIN3);
703
704 data->last_updated = jiffies;
705 data->valid = 1;
706 }
707
708 mutex_unlock(&data->update_lock);
709
710 return data;
711}
712
713module_i2c_driver(gl518_driver);
714
715MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
716 "Kyosti Malkki <kmalkki@cc.hut.fi> and "
717 "Hong-Gunn Chew <hglinux@gunnet.org>");
718MODULE_DESCRIPTION("GL518SM driver");
719MODULE_LICENSE("GPL");
720
