LXR linux/drivers/media/dvb-frontends/s5h1432.c

   1/*
   2 *  Samsung s5h1432 DVB-T demodulator driver
   3 *
   4 *  Copyright (C) 2009 Bill Liu <Bill.Liu@Conexant.com>
   5 *
   6 *  This program is free software; you can redistribute it and/or modify
   7 *  it under the terms of the GNU General Public License as published by
   8 *  the Free Software Foundation; either version 2 of the License, or
   9 *  (at your option) any later version.
  10 *
  11 *  This program is distributed in the hope that it will be useful,
  12 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 *  GNU General Public License for more details.
  15 *
  16 *  You should have received a copy of the GNU General Public License
  17 *  along with this program; if not, write to the Free Software
  18 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19 */
  20
  21#include <linux/kernel.h>
  22#include <linux/init.h>
  23#include <linux/module.h>
  24#include <linux/string.h>
  25#include <linux/slab.h>
  26#include <linux/delay.h>
  27#include "dvb_frontend.h"
  28#include "s5h1432.h"
  29
  30struct s5h1432_state {
  31
  32        struct i2c_adapter *i2c;
  33
  34        /* configuration settings */
  35        const struct s5h1432_config *config;
  36
  37        struct dvb_frontend frontend;
  38
  39        fe_modulation_t current_modulation;
  40        unsigned int first_tune:1;
  41
  42        u32 current_frequency;
  43        int if_freq;
  44
  45        u8 inversion;
  46};
  47
  48static int debug;
  49
  50#define dprintk(arg...) do {    \
  51        if (debug)              \
  52                printk(arg);    \
  53        } while (0)
  54
  55static int s5h1432_writereg(struct s5h1432_state *state,
  56                            u8 addr, u8 reg, u8 data)
  57{
  58        int ret;
  59        u8 buf[] = { reg, data };
  60
  61        struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 };
  62
  63        ret = i2c_transfer(state->i2c, &msg, 1);
  64
  65        if (ret != 1)
  66                printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, "
  67                       "ret == %i)\n", __func__, addr, reg, data, ret);
  68
  69        return (ret != 1) ? -1 : 0;
  70}
  71
  72static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg)
  73{
  74        int ret;
  75        u8 b0[] = { reg };
  76        u8 b1[] = { 0 };
  77
  78        struct i2c_msg msg[] = {
  79                {.addr = addr, .flags = 0, .buf = b0, .len = 1},
  80                {.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1}
  81        };
  82
  83        ret = i2c_transfer(state->i2c, msg, 2);
  84
  85        if (ret != 2)
  86                printk(KERN_ERR "%s: readreg error (ret == %i)\n",
  87                       __func__, ret);
  88        return b1[0];
  89}
  90
  91static int s5h1432_sleep(struct dvb_frontend *fe)
  92{
  93        return 0;
  94}
  95
  96static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe,
  97                                         u32 bandwidth)
  98{
  99        struct s5h1432_state *state = fe->demodulator_priv;
 100
 101        u8 reg = 0;
 102
 103        /* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */
 104        reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E);
 105        reg &= ~(0x0C);
 106        switch (bandwidth) {
 107        case 6:
 108                reg |= 0x08;
 109                break;
 110        case 7:
 111                reg |= 0x04;
 112                break;
 113        case 8:
 114                reg |= 0x00;
 115                break;
 116        default:
 117                return 0;
 118        }
 119        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg);
 120        return 1;
 121}
 122
 123static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz)
 124{
 125        struct s5h1432_state *state = fe->demodulator_priv;
 126
 127        switch (ifFreqHz) {
 128        case TAIWAN_HI_IF_FREQ_44_MHZ:
 129                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55);
 130                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55);
 131                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15);
 132                break;
 133        case EUROPE_HI_IF_FREQ_36_MHZ:
 134                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00);
 135                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00);
 136                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40);
 137                break;
 138        case IF_FREQ_6_MHZ:
 139                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00);
 140                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00);
 141                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0);
 142                break;
 143        case IF_FREQ_3point3_MHZ:
 144                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66);
 145                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66);
 146                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE);
 147                break;
 148        case IF_FREQ_3point5_MHZ:
 149                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55);
 150                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55);
 151                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED);
 152                break;
 153        case IF_FREQ_4_MHZ:
 154                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA);
 155                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA);
 156                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA);
 157                break;
 158        default:
 159                {
 160                        u32 value = 0;
 161                        value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 *
 162                                        (u32) 32768) / (48 * 1000));
 163                        printk(KERN_INFO
 164                               "Default IFFreq %d :reg value = 0x%x\n",
 165                               ifFreqHz, value);
 166                        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4,
 167                                         (u8) value & 0xFF);
 168                        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5,
 169                                         (u8) (value >> 8) & 0xFF);
 170                        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7,
 171                                         (u8) (value >> 16) & 0xFF);
 172                        break;
 173                }
 174
 175        }
 176
 177        return 1;
 178}
 179
 180/* Talk to the demod, set the FEC, GUARD, QAM settings etc */
 181static int s5h1432_set_frontend(struct dvb_frontend *fe)
 182{
 183        struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 184        u32 dvb_bandwidth = 8;
 185        struct s5h1432_state *state = fe->demodulator_priv;
 186
 187        if (p->frequency == state->current_frequency) {
 188                /*current_frequency = p->frequency; */
 189                /*state->current_frequency = p->frequency; */
 190        } else {
 191                fe->ops.tuner_ops.set_params(fe);
 192                msleep(300);
 193                s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
 194                switch (p->bandwidth_hz) {
 195                case 6000000:
 196                        dvb_bandwidth = 6;
 197                        s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
 198                        break;
 199                case 7000000:
 200                        dvb_bandwidth = 7;
 201                        s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
 202                        break;
 203                case 8000000:
 204                        dvb_bandwidth = 8;
 205                        s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
 206                        break;
 207                default:
 208                        return 0;
 209                }
 210                /*fe->ops.tuner_ops.set_params(fe); */
 211/*Soft Reset chip*/
 212                msleep(30);
 213                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
 214                msleep(30);
 215                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
 216
 217                s5h1432_set_channel_bandwidth(fe, dvb_bandwidth);
 218                switch (p->bandwidth_hz) {
 219                case 6000000:
 220                        dvb_bandwidth = 6;
 221                        s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
 222                        break;
 223                case 7000000:
 224                        dvb_bandwidth = 7;
 225                        s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
 226                        break;
 227                case 8000000:
 228                        dvb_bandwidth = 8;
 229                        s5h1432_set_IF(fe, IF_FREQ_4_MHZ);
 230                        break;
 231                default:
 232                        return 0;
 233                }
 234                /*fe->ops.tuner_ops.set_params(fe); */
 235                /*Soft Reset chip*/
 236                msleep(30);
 237                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
 238                msleep(30);
 239                s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
 240
 241        }
 242
 243        state->current_frequency = p->frequency;
 244
 245        return 0;
 246}
 247
 248static int s5h1432_init(struct dvb_frontend *fe)
 249{
 250        struct s5h1432_state *state = fe->demodulator_priv;
 251
 252        u8 reg = 0;
 253        state->current_frequency = 0;
 254        printk(KERN_INFO " s5h1432_init().\n");
 255
 256        /*Set VSB mode as default, this also does a soft reset */
 257        /*Initialize registers */
 258
 259        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8);
 260        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01);
 261        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70);
 262        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80);
 263        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D);
 264        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30);
 265        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20);
 266        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B);
 267        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40);
 268        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84);
 269        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a);
 270        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3);
 271        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50);
 272        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c);
 273        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10);
 274        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c);
 275        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00);
 276        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94);
 277        /* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */
 278        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00);
 279
 280        /*For NXP tuner*/
 281
 282        /*Set 3.3MHz as default IF frequency */
 283        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66);
 284        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66);
 285        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE);
 286        /* Set reg 0x1E to get the full dynamic range */
 287        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31);
 288
 289        /* Mode setting in demod */
 290        reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42);
 291        reg |= 0x80;
 292        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg);
 293        /* Serial mode */
 294
 295        /* Soft Reset chip */
 296
 297        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a);
 298        msleep(30);
 299        s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b);
 300
 301
 302        return 0;
 303}
 304
 305static int s5h1432_read_status(struct dvb_frontend *fe, fe_status_t *status)
 306{
 307        return 0;
 308}
 309
 310static int s5h1432_read_signal_strength(struct dvb_frontend *fe,
 311                                        u16 *signal_strength)
 312{
 313        return 0;
 314}
 315
 316static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr)
 317{
 318        return 0;
 319}
 320
 321static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 322{
 323
 324        return 0;
 325}
 326
 327static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber)
 328{
 329        return 0;
 330}
 331
 332static int s5h1432_get_tune_settings(struct dvb_frontend *fe,
 333                                     struct dvb_frontend_tune_settings *tune)
 334{
 335        return 0;
 336}
 337
 338static void s5h1432_release(struct dvb_frontend *fe)
 339{
 340        struct s5h1432_state *state = fe->demodulator_priv;
 341        kfree(state);
 342}
 343
 344static struct dvb_frontend_ops s5h1432_ops;
 345
 346struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config,
 347                                    struct i2c_adapter *i2c)
 348{
 349        struct s5h1432_state *state = NULL;
 350
 351        printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n");
 352        /* allocate memory for the internal state */
 353        state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL);
 354        if (!state)
 355                return NULL;
 356
 357        /* setup the state */
 358        state->config = config;
 359        state->i2c = i2c;
 360        state->current_modulation = QAM_16;
 361        state->inversion = state->config->inversion;
 362
 363        /* create dvb_frontend */
 364        memcpy(&state->frontend.ops, &s5h1432_ops,
 365               sizeof(struct dvb_frontend_ops));
 366
 367        state->frontend.demodulator_priv = state;
 368
 369        return &state->frontend;
 370}
 371EXPORT_SYMBOL(s5h1432_attach);
 372
 373static struct dvb_frontend_ops s5h1432_ops = {
 374        .delsys = { SYS_DVBT },
 375        .info = {
 376                 .name = "Samsung s5h1432 DVB-T Frontend",
 377                 .frequency_min = 177000000,
 378                 .frequency_max = 858000000,
 379                 .frequency_stepsize = 166666,
 380                 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
 381                 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
 382                 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
 383                 FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
 384                 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER},
 385
 386        .init = s5h1432_init,
 387        .sleep = s5h1432_sleep,
 388        .set_frontend = s5h1432_set_frontend,
 389        .get_tune_settings = s5h1432_get_tune_settings,
 390        .read_status = s5h1432_read_status,
 391        .read_ber = s5h1432_read_ber,
 392        .read_signal_strength = s5h1432_read_signal_strength,
 393        .read_snr = s5h1432_read_snr,
 394        .read_ucblocks = s5h1432_read_ucblocks,
 395        .release = s5h1432_release,
 396};
 397
 398module_param(debug, int, 0644);
 399MODULE_PARM_DESC(debug, "Enable verbose debug messages");
 400
 401MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver");
 402MODULE_AUTHOR("Bill Liu");
 403MODULE_LICENSE("GPL");
 404