1/* 2 * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver 3 * 4 * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 * 20 * TODO: 21 * - add smart card reader support for Conditional Access (CA) 22 * 23 * Card reader in Anysee is nothing more than ISO 7816 card reader. 24 * There is no hardware CAM in any Anysee device sold. 25 * In my understanding it should be implemented by making own module 26 * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This 27 * module registers serial interface that can be used to communicate 28 * with any ISO 7816 smart card. 29 * 30 * Any help according to implement serial smart card reader support 31 * is highly welcome! 32 */ 33 34#ifndef _DVB_USB_ANYSEE_H_ 35#define _DVB_USB_ANYSEE_H_ 36 37#define DVB_USB_LOG_PREFIX "anysee" 38#include "dvb_usb.h" 39#include "dvb_ca_en50221.h" 40 41enum cmd { 42 CMD_I2C_READ = 0x33, 43 CMD_I2C_WRITE = 0x31, 44 CMD_REG_READ = 0xb0, 45 CMD_REG_WRITE = 0xb1, 46 CMD_STREAMING_CTRL = 0x12, 47 CMD_LED_AND_IR_CTRL = 0x16, 48 CMD_GET_IR_CODE = 0x41, 49 CMD_GET_HW_INFO = 0x19, 50 CMD_SMARTCARD = 0x34, 51 CMD_CI = 0x37, 52}; 53 54struct anysee_state { 55 u8 buf[64]; 56 u8 seq; 57 u8 hw; /* PCB ID */ 58 u8 fe_id:1; /* frondend ID */ 59 u8 has_ci:1; 60 u8 ci_attached:1; 61 struct dvb_ca_en50221 ci; 62 unsigned long ci_cam_ready; /* jiffies */ 63}; 64 65#define ANYSEE_HW_507T 2 /* E30 */ 66#define ANYSEE_HW_507CD 6 /* E30 Plus */ 67#define ANYSEE_HW_507DC 10 /* E30 C Plus */ 68#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */ 69#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */ 70#define ANYSEE_HW_508TC 18 /* E7 TC */ 71#define ANYSEE_HW_508S2 19 /* E7 S2 */ 72#define ANYSEE_HW_508T2C 20 /* E7 T2C */ 73#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */ 74#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */ 75 76#define REG_IOA 0x80 /* Port A (bit addressable) */ 77#define REG_IOB 0x90 /* Port B (bit addressable) */ 78#define REG_IOC 0xa0 /* Port C (bit addressable) */ 79#define REG_IOD 0xb0 /* Port D (bit addressable) */ 80#define REG_IOE 0xb1 /* Port E (NOT bit addressable) */ 81#define REG_OEA 0xb2 /* Port A Output Enable */ 82#define REG_OEB 0xb3 /* Port B Output Enable */ 83#define REG_OEC 0xb4 /* Port C Output Enable */ 84#define REG_OED 0xb5 /* Port D Output Enable */ 85#define REG_OEE 0xb6 /* Port E Output Enable */ 86 87#endif 88 89/*************************************************************************** 90 * USB API description (reverse engineered) 91 *************************************************************************** 92 93Transaction flow: 94================= 95BULK[00001] >>> REQUEST PACKET 64 bytes 96BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY) 97BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY) 98 99General reply packet(s) are always used if not own reply defined. 100 101============================================================================ 102| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY) 103============================================================================ 104| 00 | reply data (if any) from previous transaction 105| | Just same reply packet as returned during previous transaction. 106| | Needed only if reply is missed in previous transaction. 107| | Just skip normally. 108---------------------------------------------------------------------------- 109| 01-59 | don't care 110---------------------------------------------------------------------------- 111| 60 | packet sequence number 112---------------------------------------------------------------------------- 113| 61-63 | don't care 114---------------------------------------------------------------------------- 115 116============================================================================ 117| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY) 118============================================================================ 119| 00 | reply data (if any) 120---------------------------------------------------------------------------- 121| 01-59 | don't care 122---------------------------------------------------------------------------- 123| 60 | packet sequence number 124---------------------------------------------------------------------------- 125| 61-63 | don't care 126---------------------------------------------------------------------------- 127 128============================================================================ 129| 00-63 | I2C WRITE REQUEST PACKET 130============================================================================ 131| 00 | 0x31 I2C write command 132---------------------------------------------------------------------------- 133| 01 | i2c address 134---------------------------------------------------------------------------- 135| 02 | data length 136| | 0x02 (for typical I2C reg / val pair) 137---------------------------------------------------------------------------- 138| 03 | 0x01 139---------------------------------------------------------------------------- 140| 04- | data 141---------------------------------------------------------------------------- 142| -59 | don't care 143---------------------------------------------------------------------------- 144| 60 | packet sequence number 145---------------------------------------------------------------------------- 146| 61-63 | don't care 147---------------------------------------------------------------------------- 148 149============================================================================ 150| 00-63 | I2C READ REQUEST PACKET 151============================================================================ 152| 00 | 0x33 I2C read command 153---------------------------------------------------------------------------- 154| 01 | i2c address + 1 155---------------------------------------------------------------------------- 156| 02 | register 157---------------------------------------------------------------------------- 158| 03 | 0x00 159---------------------------------------------------------------------------- 160| 04 | 0x00 161---------------------------------------------------------------------------- 162| 05 | data length 163---------------------------------------------------------------------------- 164| 06-59 | don't care 165---------------------------------------------------------------------------- 166| 60 | packet sequence number 167---------------------------------------------------------------------------- 168| 61-63 | don't care 169---------------------------------------------------------------------------- 170 171============================================================================ 172| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET 173============================================================================ 174| 00 | 0xb1 register write command 175---------------------------------------------------------------------------- 176| 01-02 | register 177---------------------------------------------------------------------------- 178| 03 | 0x01 179---------------------------------------------------------------------------- 180| 04 | value 181---------------------------------------------------------------------------- 182| 05-59 | don't care 183---------------------------------------------------------------------------- 184| 60 | packet sequence number 185---------------------------------------------------------------------------- 186| 61-63 | don't care 187---------------------------------------------------------------------------- 188 189============================================================================ 190| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET 191============================================================================ 192| 00 | 0xb0 register read command 193---------------------------------------------------------------------------- 194| 01-02 | register 195---------------------------------------------------------------------------- 196| 03 | 0x01 197---------------------------------------------------------------------------- 198| 04-59 | don't care 199---------------------------------------------------------------------------- 200| 60 | packet sequence number 201---------------------------------------------------------------------------- 202| 61-63 | don't care 203---------------------------------------------------------------------------- 204 205============================================================================ 206| 00-63 | LED CONTROL REQUEST PACKET 207============================================================================ 208| 00 | 0x16 LED and IR control command 209---------------------------------------------------------------------------- 210| 01 | 0x01 (LED) 211---------------------------------------------------------------------------- 212| 03 | 0x00 blink 213| | 0x01 lights continuously 214---------------------------------------------------------------------------- 215| 04 | blink interval 216| | 0x00 fastest (looks like LED lights continuously) 217| | 0xff slowest 218---------------------------------------------------------------------------- 219| 05-59 | don't care 220---------------------------------------------------------------------------- 221| 60 | packet sequence number 222---------------------------------------------------------------------------- 223| 61-63 | don't care 224---------------------------------------------------------------------------- 225 226============================================================================ 227| 00-63 | IR CONTROL REQUEST PACKET 228============================================================================ 229| 00 | 0x16 LED and IR control command 230---------------------------------------------------------------------------- 231| 01 | 0x02 (IR) 232---------------------------------------------------------------------------- 233| 03 | 0x00 IR disabled 234| | 0x01 IR enabled 235---------------------------------------------------------------------------- 236| 04-59 | don't care 237---------------------------------------------------------------------------- 238| 60 | packet sequence number 239---------------------------------------------------------------------------- 240| 61-63 | don't care 241---------------------------------------------------------------------------- 242 243============================================================================ 244| 00-63 | STREAMING CONTROL REQUEST PACKET 245============================================================================ 246| 00 | 0x12 streaming control command 247---------------------------------------------------------------------------- 248| 01 | 0x00 streaming disabled 249| | 0x01 streaming enabled 250---------------------------------------------------------------------------- 251| 02 | 0x00 252---------------------------------------------------------------------------- 253| 03-59 | don't care 254---------------------------------------------------------------------------- 255| 60 | packet sequence number 256---------------------------------------------------------------------------- 257| 61-63 | don't care 258---------------------------------------------------------------------------- 259 260============================================================================ 261| 00-63 | REMOTE CONTROL REQUEST PACKET 262============================================================================ 263| 00 | 0x41 remote control command 264---------------------------------------------------------------------------- 265| 01-59 | don't care 266---------------------------------------------------------------------------- 267| 60 | packet sequence number 268---------------------------------------------------------------------------- 269| 61-63 | don't care 270---------------------------------------------------------------------------- 271 272============================================================================ 273| 00-63 | REMOTE CONTROL REPLY PACKET 274============================================================================ 275| 00 | 0x00 code not received 276| | 0x01 code received 277---------------------------------------------------------------------------- 278| 01 | remote control code 279---------------------------------------------------------------------------- 280| 02-59 | don't care 281---------------------------------------------------------------------------- 282| 60 | packet sequence number 283---------------------------------------------------------------------------- 284| 61-63 | don't care 285---------------------------------------------------------------------------- 286 287============================================================================ 288| 00-63 | GET HARDWARE INFO REQUEST PACKET 289============================================================================ 290| 00 | 0x19 get hardware info command 291---------------------------------------------------------------------------- 292| 01-59 | don't care 293---------------------------------------------------------------------------- 294| 60 | packet sequence number 295---------------------------------------------------------------------------- 296| 61-63 | don't care 297---------------------------------------------------------------------------- 298 299============================================================================ 300| 00-63 | GET HARDWARE INFO REPLY PACKET 301============================================================================ 302| 00 | hardware id 303---------------------------------------------------------------------------- 304| 01-02 | firmware version 305---------------------------------------------------------------------------- 306| 03-59 | don't care 307---------------------------------------------------------------------------- 308| 60 | packet sequence number 309---------------------------------------------------------------------------- 310| 61-63 | don't care 311---------------------------------------------------------------------------- 312 313============================================================================ 314| 00-63 | SMART CARD READER PACKET 315============================================================================ 316| 00 | 0x34 smart card reader command 317---------------------------------------------------------------------------- 318| xx | 319---------------------------------------------------------------------------- 320| xx-59 | don't care 321---------------------------------------------------------------------------- 322| 60 | packet sequence number 323---------------------------------------------------------------------------- 324| 61-63 | don't care 325---------------------------------------------------------------------------- 326 327*/ 328