linux/drivers/net/ethernet/fujitsu/fmvj18x_cs.c
<<
>>
Prefs
   1/*======================================================================
   2    fmvj18x_cs.c 2.8 2002/03/23
   3
   4    A fmvj18x (and its compatibles) PCMCIA client driver
   5
   6    Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
   7
   8    TDK LAK-CD021 and CONTEC C-NET(PC)C support added by 
   9    Nobuhiro Katayama, kata-n@po.iijnet.or.jp
  10
  11    The PCMCIA client code is based on code written by David Hinds.
  12    Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
  13    but is actually largely Donald Becker's AT1700 driver, which
  14    carries the following attribution:
  15
  16    Written 1993-94 by Donald Becker.
  17
  18    Copyright 1993 United States Government as represented by the
  19    Director, National Security Agency.
  20    
  21    This software may be used and distributed according to the terms
  22    of the GNU General Public License, incorporated herein by reference.
  23    
  24    The author may be reached as becker@scyld.com, or C/O
  25    Scyld Computing Corporation
  26    410 Severn Ave., Suite 210
  27    Annapolis MD 21403
  28   
  29======================================================================*/
  30
  31#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  32
  33#define DRV_NAME        "fmvj18x_cs"
  34#define DRV_VERSION     "2.9"
  35
  36#include <linux/module.h>
  37#include <linux/kernel.h>
  38#include <linux/init.h>
  39#include <linux/ptrace.h>
  40#include <linux/slab.h>
  41#include <linux/string.h>
  42#include <linux/timer.h>
  43#include <linux/interrupt.h>
  44#include <linux/in.h>
  45#include <linux/delay.h>
  46#include <linux/ethtool.h>
  47#include <linux/netdevice.h>
  48#include <linux/etherdevice.h>
  49#include <linux/skbuff.h>
  50#include <linux/if_arp.h>
  51#include <linux/ioport.h>
  52#include <linux/crc32.h>
  53
  54#include <pcmcia/cistpl.h>
  55#include <pcmcia/ciscode.h>
  56#include <pcmcia/ds.h>
  57
  58#include <asm/uaccess.h>
  59#include <asm/io.h>
  60
  61/*====================================================================*/
  62
  63/* Module parameters */
  64
  65MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
  66MODULE_LICENSE("GPL");
  67
  68#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
  69
  70/* SRAM configuration */
  71/* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
  72INT_MODULE_PARM(sram_config, 0);
  73
  74
  75/*====================================================================*/
  76/*
  77    PCMCIA event handlers
  78 */
  79static int fmvj18x_config(struct pcmcia_device *link);
  80static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
  81static int fmvj18x_setup_mfc(struct pcmcia_device *link);
  82static void fmvj18x_release(struct pcmcia_device *link);
  83static void fmvj18x_detach(struct pcmcia_device *p_dev);
  84
  85/*
  86    LAN controller(MBH86960A) specific routines
  87 */
  88static int fjn_config(struct net_device *dev, struct ifmap *map);
  89static int fjn_open(struct net_device *dev);
  90static int fjn_close(struct net_device *dev);
  91static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
  92                                        struct net_device *dev);
  93static irqreturn_t fjn_interrupt(int irq, void *dev_id);
  94static void fjn_rx(struct net_device *dev);
  95static void fjn_reset(struct net_device *dev);
  96static void set_rx_mode(struct net_device *dev);
  97static void fjn_tx_timeout(struct net_device *dev);
  98static const struct ethtool_ops netdev_ethtool_ops;
  99
 100/*
 101    card type
 102 */
 103typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN, 
 104               XXX10304, NEC, KME
 105} cardtype_t;
 106
 107/*
 108    driver specific data structure
 109*/
 110typedef struct local_info_t {
 111        struct pcmcia_device    *p_dev;
 112    long open_time;
 113    uint tx_started:1;
 114    uint tx_queue;
 115    u_short tx_queue_len;
 116    cardtype_t cardtype;
 117    u_short sent;
 118    u_char __iomem *base;
 119} local_info_t;
 120
 121#define MC_FILTERBREAK 64
 122
 123/*====================================================================*/
 124/* 
 125    ioport offset from the base address 
 126 */
 127#define TX_STATUS               0 /* transmit status register */
 128#define RX_STATUS               1 /* receive status register */
 129#define TX_INTR                 2 /* transmit interrupt mask register */
 130#define RX_INTR                 3 /* receive interrupt mask register */
 131#define TX_MODE                 4 /* transmit mode register */
 132#define RX_MODE                 5 /* receive mode register */
 133#define CONFIG_0                6 /* configuration register 0 */
 134#define CONFIG_1                7 /* configuration register 1 */
 135
 136#define NODE_ID                 8 /* node ID register            (bank 0) */
 137#define MAR_ADR                 8 /* multicast address registers (bank 1) */
 138
 139#define DATAPORT                8 /* buffer mem port registers   (bank 2) */
 140#define TX_START               10 /* transmit start register */
 141#define COL_CTRL               11 /* 16 collision control register */
 142#define BMPR12                 12 /* reserved */
 143#define BMPR13                 13 /* reserved */
 144#define RX_SKIP                14 /* skip received packet register */
 145
 146#define LAN_CTRL               16 /* LAN card control register */
 147
 148#define MAC_ID               0x1a /* hardware address */
 149#define UNGERMANN_MAC_ID     0x18 /* UNGERMANN-BASS hardware address */
 150
 151/* 
 152    control bits 
 153 */
 154#define ENA_TMT_OK           0x80
 155#define ENA_TMT_REC          0x20
 156#define ENA_COL              0x04
 157#define ENA_16_COL           0x02
 158#define ENA_TBUS_ERR         0x01
 159
 160#define ENA_PKT_RDY          0x80
 161#define ENA_BUS_ERR          0x40
 162#define ENA_LEN_ERR          0x08
 163#define ENA_ALG_ERR          0x04
 164#define ENA_CRC_ERR          0x02
 165#define ENA_OVR_FLO          0x01
 166
 167/* flags */
 168#define F_TMT_RDY            0x80 /* can accept new packet */
 169#define F_NET_BSY            0x40 /* carrier is detected */
 170#define F_TMT_OK             0x20 /* send packet successfully */
 171#define F_SRT_PKT            0x10 /* short packet error */
 172#define F_COL_ERR            0x04 /* collision error */
 173#define F_16_COL             0x02 /* 16 collision error */
 174#define F_TBUS_ERR           0x01 /* bus read error */
 175
 176#define F_PKT_RDY            0x80 /* packet(s) in buffer */
 177#define F_BUS_ERR            0x40 /* bus read error */
 178#define F_LEN_ERR            0x08 /* short packet */
 179#define F_ALG_ERR            0x04 /* frame error */
 180#define F_CRC_ERR            0x02 /* CRC error */
 181#define F_OVR_FLO            0x01 /* overflow error */
 182
 183#define F_BUF_EMP            0x40 /* receive buffer is empty */
 184
 185#define F_SKP_PKT            0x05 /* drop packet in buffer */
 186
 187/* default bitmaps */
 188#define D_TX_INTR  ( ENA_TMT_OK )
 189#define D_RX_INTR  ( ENA_PKT_RDY | ENA_LEN_ERR \
 190                   | ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
 191#define TX_STAT_M  ( F_TMT_RDY )
 192#define RX_STAT_M  ( F_PKT_RDY | F_LEN_ERR \
 193                   | F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
 194
 195/* commands */
 196#define D_TX_MODE            0x06 /* no tests, detect carrier */
 197#define ID_MATCHED           0x02 /* (RX_MODE) */
 198#define RECV_ALL             0x03 /* (RX_MODE) */
 199#define CONFIG0_DFL          0x5a /* 16bit bus, 4K x 2 Tx queues */
 200#define CONFIG0_DFL_1        0x5e /* 16bit bus, 8K x 2 Tx queues */
 201#define CONFIG0_RST          0xda /* Data Link Controller off (CONFIG_0) */
 202#define CONFIG0_RST_1        0xde /* Data Link Controller off (CONFIG_0) */
 203#define BANK_0               0xa0 /* bank 0 (CONFIG_1) */
 204#define BANK_1               0xa4 /* bank 1 (CONFIG_1) */
 205#define BANK_2               0xa8 /* bank 2 (CONFIG_1) */
 206#define CHIP_OFF             0x80 /* contrl chip power off (CONFIG_1) */
 207#define DO_TX                0x80 /* do transmit packet */
 208#define SEND_PKT             0x81 /* send a packet */
 209#define AUTO_MODE            0x07 /* Auto skip packet on 16 col detected */
 210#define MANU_MODE            0x03 /* Stop and skip packet on 16 col */
 211#define TDK_AUTO_MODE        0x47 /* Auto skip packet on 16 col detected */
 212#define TDK_MANU_MODE        0x43 /* Stop and skip packet on 16 col */
 213#define INTR_OFF             0x0d /* LAN controller ignores interrupts */
 214#define INTR_ON              0x1d /* LAN controller will catch interrupts */
 215
 216#define TX_TIMEOUT              ((400*HZ)/1000)
 217
 218#define BANK_0U              0x20 /* bank 0 (CONFIG_1) */
 219#define BANK_1U              0x24 /* bank 1 (CONFIG_1) */
 220#define BANK_2U              0x28 /* bank 2 (CONFIG_1) */
 221
 222static const struct net_device_ops fjn_netdev_ops = {
 223        .ndo_open               = fjn_open,
 224        .ndo_stop               = fjn_close,
 225        .ndo_start_xmit         = fjn_start_xmit,
 226        .ndo_tx_timeout         = fjn_tx_timeout,
 227        .ndo_set_config         = fjn_config,
 228        .ndo_set_rx_mode        = set_rx_mode,
 229        .ndo_change_mtu         = eth_change_mtu,
 230        .ndo_set_mac_address    = eth_mac_addr,
 231        .ndo_validate_addr      = eth_validate_addr,
 232};
 233
 234static int fmvj18x_probe(struct pcmcia_device *link)
 235{
 236    local_info_t *lp;
 237    struct net_device *dev;
 238
 239    dev_dbg(&link->dev, "fmvj18x_attach()\n");
 240
 241    /* Make up a FMVJ18x specific data structure */
 242    dev = alloc_etherdev(sizeof(local_info_t));
 243    if (!dev)
 244        return -ENOMEM;
 245    lp = netdev_priv(dev);
 246    link->priv = dev;
 247    lp->p_dev = link;
 248    lp->base = NULL;
 249
 250    /* The io structure describes IO port mapping */
 251    link->resource[0]->end = 32;
 252    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 253
 254    /* General socket configuration */
 255    link->config_flags |= CONF_ENABLE_IRQ;
 256
 257    dev->netdev_ops = &fjn_netdev_ops;
 258    dev->watchdog_timeo = TX_TIMEOUT;
 259
 260    SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 261
 262    return fmvj18x_config(link);
 263} /* fmvj18x_attach */
 264
 265/*====================================================================*/
 266
 267static void fmvj18x_detach(struct pcmcia_device *link)
 268{
 269    struct net_device *dev = link->priv;
 270
 271    dev_dbg(&link->dev, "fmvj18x_detach\n");
 272
 273    unregister_netdev(dev);
 274
 275    fmvj18x_release(link);
 276
 277    free_netdev(dev);
 278} /* fmvj18x_detach */
 279
 280/*====================================================================*/
 281
 282static int mfc_try_io_port(struct pcmcia_device *link)
 283{
 284    int i, ret;
 285    static const unsigned int serial_base[5] =
 286        { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 287
 288    for (i = 0; i < 5; i++) {
 289        link->resource[1]->start = serial_base[i];
 290        link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 291        if (link->resource[1]->start == 0) {
 292            link->resource[1]->end = 0;
 293            pr_notice("out of resource for serial\n");
 294        }
 295        ret = pcmcia_request_io(link);
 296        if (ret == 0)
 297                return ret;
 298    }
 299    return ret;
 300}
 301
 302static int ungermann_try_io_port(struct pcmcia_device *link)
 303{
 304    int ret;
 305    unsigned int ioaddr;
 306    /*
 307        Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
 308        0x380,0x3c0 only for ioport.
 309    */
 310    for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
 311        link->resource[0]->start = ioaddr;
 312        ret = pcmcia_request_io(link);
 313        if (ret == 0) {
 314            /* calculate ConfigIndex value */
 315            link->config_index =
 316                ((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 317            return ret;
 318        }
 319    }
 320    return ret; /* RequestIO failed */
 321}
 322
 323static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
 324{
 325        return 0; /* strange, but that's what the code did already before... */
 326}
 327
 328static int fmvj18x_config(struct pcmcia_device *link)
 329{
 330    struct net_device *dev = link->priv;
 331    local_info_t *lp = netdev_priv(dev);
 332    int i, ret;
 333    unsigned int ioaddr;
 334    cardtype_t cardtype;
 335    char *card_name = "unknown";
 336    u8 *buf;
 337    size_t len;
 338    u_char buggybuf[32];
 339
 340    dev_dbg(&link->dev, "fmvj18x_config\n");
 341
 342    link->io_lines = 5;
 343
 344    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 345    kfree(buf);
 346
 347    if (len) {
 348        /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
 349        ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
 350        if (ret != 0)
 351                goto failed;
 352
 353        switch (link->manf_id) {
 354        case MANFID_TDK:
 355            cardtype = TDK;
 356            if (link->card_id == PRODID_TDK_GN3410 ||
 357                link->card_id == PRODID_TDK_NP9610 ||
 358                link->card_id == PRODID_TDK_MN3200) {
 359                /* MultiFunction Card */
 360                link->config_base = 0x800;
 361                link->config_index = 0x47;
 362                link->resource[1]->end = 8;
 363            }
 364            break;
 365        case MANFID_NEC:
 366            cardtype = NEC; /* MultiFunction Card */
 367            link->config_base = 0x800;
 368            link->config_index = 0x47;
 369            link->resource[1]->end = 8;
 370            break;
 371        case MANFID_KME:
 372            cardtype = KME; /* MultiFunction Card */
 373            link->config_base = 0x800;
 374            link->config_index = 0x47;
 375            link->resource[1]->end = 8;
 376            break;
 377        case MANFID_CONTEC:
 378            cardtype = CONTEC;
 379            break;
 380        case MANFID_FUJITSU:
 381            if (link->config_base == 0x0fe0)
 382                cardtype = MBH10302;
 383            else if (link->card_id == PRODID_FUJITSU_MBH10302) 
 384                /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
 385                   but these are MBH10304 based card. */ 
 386                cardtype = MBH10304;
 387            else if (link->card_id == PRODID_FUJITSU_MBH10304)
 388                cardtype = MBH10304;
 389            else
 390                cardtype = LA501;
 391            break;
 392        default:
 393            cardtype = MBH10304;
 394        }
 395    } else {
 396        /* old type card */
 397        switch (link->manf_id) {
 398        case MANFID_FUJITSU:
 399            if (link->card_id == PRODID_FUJITSU_MBH10304) {
 400                cardtype = XXX10304;    /* MBH10304 with buggy CIS */
 401                link->config_index = 0x20;
 402            } else {
 403                cardtype = MBH10302;    /* NextCom NC5310, etc. */
 404                link->config_index = 1;
 405            }
 406            break;
 407        case MANFID_UNGERMANN:
 408            cardtype = UNGERMANN;
 409            break;
 410        default:
 411            cardtype = MBH10302;
 412            link->config_index = 1;
 413        }
 414    }
 415
 416    if (link->resource[1]->end != 0) {
 417        ret = mfc_try_io_port(link);
 418        if (ret != 0) goto failed;
 419    } else if (cardtype == UNGERMANN) {
 420        ret = ungermann_try_io_port(link);
 421        if (ret != 0) goto failed;
 422    } else { 
 423            ret = pcmcia_request_io(link);
 424            if (ret)
 425                    goto failed;
 426    }
 427    ret = pcmcia_request_irq(link, fjn_interrupt);
 428    if (ret)
 429            goto failed;
 430    ret = pcmcia_enable_device(link);
 431    if (ret)
 432            goto failed;
 433
 434    dev->irq = link->irq;
 435    dev->base_addr = link->resource[0]->start;
 436
 437    if (resource_size(link->resource[1]) != 0) {
 438        ret = fmvj18x_setup_mfc(link);
 439        if (ret != 0) goto failed;
 440    }
 441
 442    ioaddr = dev->base_addr;
 443
 444    /* Reset controller */
 445    if (sram_config == 0) 
 446        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 447    else
 448        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 449
 450    /* Power On chip and select bank 0 */
 451    if (cardtype == MBH10302)
 452        outb(BANK_0, ioaddr + CONFIG_1);
 453    else
 454        outb(BANK_0U, ioaddr + CONFIG_1);
 455    
 456    /* Set hardware address */
 457    switch (cardtype) {
 458    case MBH10304:
 459    case TDK:
 460    case LA501:
 461    case CONTEC:
 462    case NEC:
 463    case KME:
 464        if (cardtype == MBH10304) {
 465            card_name = "FMV-J182";
 466
 467            len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
 468            if (len < 11) {
 469                    kfree(buf);
 470                    goto failed;
 471            }
 472            /* Read MACID from CIS */
 473            for (i = 5; i < 11; i++)
 474                    dev->dev_addr[i] = buf[i];
 475            kfree(buf);
 476        } else {
 477            if (pcmcia_get_mac_from_cis(link, dev))
 478                goto failed;
 479            if( cardtype == TDK ) {
 480                card_name = "TDK LAK-CD021";
 481            } else if( cardtype == LA501 ) {
 482                card_name = "LA501";
 483            } else if( cardtype == NEC ) {
 484                card_name = "PK-UG-J001";
 485            } else if( cardtype == KME ) {
 486                card_name = "Panasonic";
 487            } else {
 488                card_name = "C-NET(PC)C";
 489            }
 490        }
 491        break;
 492    case UNGERMANN:
 493        /* Read MACID from register */
 494        for (i = 0; i < 6; i++) 
 495            dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
 496        card_name = "Access/CARD";
 497        break;
 498    case XXX10304:
 499        /* Read MACID from Buggy CIS */
 500        if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
 501            pr_notice("unable to read hardware net address\n");
 502            goto failed;
 503        }
 504        for (i = 0 ; i < 6; i++) {
 505            dev->dev_addr[i] = buggybuf[i];
 506        }
 507        card_name = "FMV-J182";
 508        break;
 509    case MBH10302:
 510    default:
 511        /* Read MACID from register */
 512        for (i = 0; i < 6; i++) 
 513            dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
 514        card_name = "FMV-J181";
 515        break;
 516    }
 517
 518    lp->cardtype = cardtype;
 519    SET_NETDEV_DEV(dev, &link->dev);
 520
 521    if (register_netdev(dev) != 0) {
 522        pr_notice("register_netdev() failed\n");
 523        goto failed;
 524    }
 525
 526    /* print current configuration */
 527    netdev_info(dev, "%s, sram %s, port %#3lx, irq %d, hw_addr %pM\n",
 528                card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
 529                dev->base_addr, dev->irq, dev->dev_addr);
 530
 531    return 0;
 532    
 533failed:
 534    fmvj18x_release(link);
 535    return -ENODEV;
 536} /* fmvj18x_config */
 537/*====================================================================*/
 538
 539static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 540{
 541    u_char __iomem *base;
 542    int i, j;
 543
 544    /* Allocate a small memory window */
 545    link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 546    link->resource[2]->start = 0; link->resource[2]->end = 0;
 547    i = pcmcia_request_window(link, link->resource[2], 0);
 548    if (i != 0)
 549        return -1;
 550
 551    base = ioremap(link->resource[2]->start, resource_size(link->resource[2]));
 552    pcmcia_map_mem_page(link, link->resource[2], 0);
 553
 554    /*
 555     *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
 556     *  22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
 557     *  'xx' is garbage.
 558     *  'yy' is MAC address.
 559    */ 
 560    for (i = 0; i < 0x200; i++) {
 561        if (readb(base+i*2) == 0x22) {  
 562                if (readb(base+(i-1)*2) == 0xff &&
 563                    readb(base+(i+5)*2) == 0x04 &&
 564                    readb(base+(i+6)*2) == 0x06 &&
 565                    readb(base+(i+13)*2) == 0xff)
 566                        break;
 567        }
 568    }
 569
 570    if (i != 0x200) {
 571        for (j = 0 ; j < 6; j++,i++) {
 572            node_id[j] = readb(base+(i+7)*2);
 573        }
 574    }
 575
 576    iounmap(base);
 577    j = pcmcia_release_window(link, link->resource[2]);
 578    return (i != 0x200) ? 0 : -1;
 579
 580} /* fmvj18x_get_hwinfo */
 581/*====================================================================*/
 582
 583static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 584{
 585    int i;
 586    struct net_device *dev = link->priv;
 587    unsigned int ioaddr;
 588    local_info_t *lp = netdev_priv(dev);
 589
 590    /* Allocate a small memory window */
 591    link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 592    link->resource[3]->start = link->resource[3]->end = 0;
 593    i = pcmcia_request_window(link, link->resource[3], 0);
 594    if (i != 0)
 595        return -1;
 596
 597    lp->base = ioremap(link->resource[3]->start,
 598                       resource_size(link->resource[3]));
 599    if (lp->base == NULL) {
 600        netdev_notice(dev, "ioremap failed\n");
 601        return -1;
 602    }
 603
 604    i = pcmcia_map_mem_page(link, link->resource[3], 0);
 605    if (i != 0) {
 606        iounmap(lp->base);
 607        lp->base = NULL;
 608        return -1;
 609    }
 610    
 611    ioaddr = dev->base_addr;
 612    writeb(0x47, lp->base+0x800);       /* Config Option Register of LAN */
 613    writeb(0x0,  lp->base+0x802);       /* Config and Status Register */
 614
 615    writeb(ioaddr & 0xff, lp->base+0x80a);        /* I/O Base(Low) of LAN */
 616    writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
 617   
 618    writeb(0x45, lp->base+0x820);       /* Config Option Register of Modem */
 619    writeb(0x8,  lp->base+0x822);       /* Config and Status Register */
 620
 621    return 0;
 622
 623}
 624/*====================================================================*/
 625
 626static void fmvj18x_release(struct pcmcia_device *link)
 627{
 628
 629    struct net_device *dev = link->priv;
 630    local_info_t *lp = netdev_priv(dev);
 631    u_char __iomem *tmp;
 632
 633    dev_dbg(&link->dev, "fmvj18x_release\n");
 634
 635    if (lp->base != NULL) {
 636        tmp = lp->base;
 637        lp->base = NULL;    /* set NULL before iounmap */
 638        iounmap(tmp);
 639    }
 640
 641    pcmcia_disable_device(link);
 642
 643}
 644
 645static int fmvj18x_suspend(struct pcmcia_device *link)
 646{
 647        struct net_device *dev = link->priv;
 648
 649        if (link->open)
 650                netif_device_detach(dev);
 651
 652        return 0;
 653}
 654
 655static int fmvj18x_resume(struct pcmcia_device *link)
 656{
 657        struct net_device *dev = link->priv;
 658
 659        if (link->open) {
 660                fjn_reset(dev);
 661                netif_device_attach(dev);
 662        }
 663
 664        return 0;
 665}
 666
 667/*====================================================================*/
 668
 669static const struct pcmcia_device_id fmvj18x_ids[] = {
 670        PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
 671        PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
 672        PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
 673        PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
 674        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
 675        PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
 676        PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
 677        PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
 678        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0       ", 0x8cef4d3a, 0x075fc7b6),
 679        PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0        ", 0x8cef4d3a, 0xbccf43e6),
 680        PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
 681        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
 682        PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
 683        PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
 684        PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304  ES", 0x2599f454),
 685        PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
 686        PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
 687        PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 688        PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 689        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 690        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
 691        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0e01),
 692        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
 693        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0b05),
 694        PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 695        PCMCIA_DEVICE_NULL,
 696};
 697MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
 698
 699static struct pcmcia_driver fmvj18x_cs_driver = {
 700        .owner          = THIS_MODULE,
 701        .name           = "fmvj18x_cs",
 702        .probe          = fmvj18x_probe,
 703        .remove         = fmvj18x_detach,
 704        .id_table       = fmvj18x_ids,
 705        .suspend        = fmvj18x_suspend,
 706        .resume         = fmvj18x_resume,
 707};
 708module_pcmcia_driver(fmvj18x_cs_driver);
 709
 710/*====================================================================*/
 711
 712static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
 713{
 714    struct net_device *dev = dev_id;
 715    local_info_t *lp = netdev_priv(dev);
 716    unsigned int ioaddr;
 717    unsigned short tx_stat, rx_stat;
 718
 719    ioaddr = dev->base_addr;
 720
 721    /* avoid multiple interrupts */
 722    outw(0x0000, ioaddr + TX_INTR);
 723
 724    /* wait for a while */
 725    udelay(1);
 726
 727    /* get status */
 728    tx_stat = inb(ioaddr + TX_STATUS);
 729    rx_stat = inb(ioaddr + RX_STATUS);
 730
 731    /* clear status */
 732    outb(tx_stat, ioaddr + TX_STATUS);
 733    outb(rx_stat, ioaddr + RX_STATUS);
 734    
 735    pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
 736    pr_debug("               tx_status %02x.\n", tx_stat);
 737    
 738    if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 739        /* there is packet(s) in rx buffer */
 740        fjn_rx(dev);
 741    }
 742    if (tx_stat & F_TMT_RDY) {
 743        dev->stats.tx_packets += lp->sent ;
 744        lp->sent = 0 ;
 745        if (lp->tx_queue) {
 746            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 747            lp->sent = lp->tx_queue ;
 748            lp->tx_queue = 0;
 749            lp->tx_queue_len = 0;
 750            dev->trans_start = jiffies;
 751        } else {
 752            lp->tx_started = 0;
 753        }
 754        netif_wake_queue(dev);
 755    }
 756    pr_debug("%s: exiting interrupt,\n", dev->name);
 757    pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
 758
 759    outb(D_TX_INTR, ioaddr + TX_INTR);
 760    outb(D_RX_INTR, ioaddr + RX_INTR);
 761
 762    if (lp->base != NULL) {
 763        /* Ack interrupt for multifunction card */
 764        writeb(0x01, lp->base+0x802);
 765        writeb(0x09, lp->base+0x822);
 766    }
 767
 768    return IRQ_HANDLED;
 769
 770} /* fjn_interrupt */
 771
 772/*====================================================================*/
 773
 774static void fjn_tx_timeout(struct net_device *dev)
 775{
 776    struct local_info_t *lp = netdev_priv(dev);
 777    unsigned int ioaddr = dev->base_addr;
 778
 779    netdev_notice(dev, "transmit timed out with status %04x, %s?\n",
 780                  htons(inw(ioaddr + TX_STATUS)),
 781                  inb(ioaddr + TX_STATUS) & F_TMT_RDY
 782                  ? "IRQ conflict" : "network cable problem");
 783    netdev_notice(dev, "timeout registers: %04x %04x %04x "
 784                  "%04x %04x %04x %04x %04x.\n",
 785                  htons(inw(ioaddr + 0)), htons(inw(ioaddr + 2)),
 786                  htons(inw(ioaddr + 4)), htons(inw(ioaddr + 6)),
 787                  htons(inw(ioaddr + 8)), htons(inw(ioaddr + 10)),
 788                  htons(inw(ioaddr + 12)), htons(inw(ioaddr + 14)));
 789    dev->stats.tx_errors++;
 790    /* ToDo: We should try to restart the adaptor... */
 791    local_irq_disable();
 792    fjn_reset(dev);
 793
 794    lp->tx_started = 0;
 795    lp->tx_queue = 0;
 796    lp->tx_queue_len = 0;
 797    lp->sent = 0;
 798    lp->open_time = jiffies;
 799    local_irq_enable();
 800    netif_wake_queue(dev);
 801}
 802
 803static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
 804                                        struct net_device *dev)
 805{
 806    struct local_info_t *lp = netdev_priv(dev);
 807    unsigned int ioaddr = dev->base_addr;
 808    short length = skb->len;
 809    
 810    if (length < ETH_ZLEN)
 811    {
 812        if (skb_padto(skb, ETH_ZLEN))
 813                return NETDEV_TX_OK;
 814        length = ETH_ZLEN;
 815    }
 816
 817    netif_stop_queue(dev);
 818
 819    {
 820        unsigned char *buf = skb->data;
 821
 822        if (length > ETH_FRAME_LEN) {
 823            netdev_notice(dev, "Attempting to send a large packet (%d bytes)\n",
 824                          length);
 825            return NETDEV_TX_BUSY;
 826        }
 827
 828        netdev_dbg(dev, "Transmitting a packet of length %lu\n",
 829                   (unsigned long)skb->len);
 830        dev->stats.tx_bytes += skb->len;
 831
 832        /* Disable both interrupts. */
 833        outw(0x0000, ioaddr + TX_INTR);
 834
 835        /* wait for a while */
 836        udelay(1);
 837
 838        outw(length, ioaddr + DATAPORT);
 839        outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
 840
 841        lp->tx_queue++;
 842        lp->tx_queue_len += ((length+3) & ~1);
 843
 844        if (lp->tx_started == 0) {
 845            /* If the Tx is idle, always trigger a transmit. */
 846            outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
 847            lp->sent = lp->tx_queue ;
 848            lp->tx_queue = 0;
 849            lp->tx_queue_len = 0;
 850            lp->tx_started = 1;
 851            netif_start_queue(dev);
 852        } else {
 853            if( sram_config == 0 ) {
 854                if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
 855                    /* Yes, there is room for one more packet. */
 856                    netif_start_queue(dev);
 857            } else {
 858                if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) && 
 859                                                lp->tx_queue < 127 )
 860                    /* Yes, there is room for one more packet. */
 861                    netif_start_queue(dev);
 862            }
 863        }
 864
 865        /* Re-enable interrupts */
 866        outb(D_TX_INTR, ioaddr + TX_INTR);
 867        outb(D_RX_INTR, ioaddr + RX_INTR);
 868    }
 869    dev_kfree_skb (skb);
 870
 871    return NETDEV_TX_OK;
 872} /* fjn_start_xmit */
 873
 874/*====================================================================*/
 875
 876static void fjn_reset(struct net_device *dev)
 877{
 878    struct local_info_t *lp = netdev_priv(dev);
 879    unsigned int ioaddr = dev->base_addr;
 880    int i;
 881
 882    netdev_dbg(dev, "fjn_reset() called\n");
 883
 884    /* Reset controller */
 885    if( sram_config == 0 ) 
 886        outb(CONFIG0_RST, ioaddr + CONFIG_0);
 887    else
 888        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
 889
 890    /* Power On chip and select bank 0 */
 891    if (lp->cardtype == MBH10302)
 892        outb(BANK_0, ioaddr + CONFIG_1);
 893    else
 894        outb(BANK_0U, ioaddr + CONFIG_1);
 895
 896    /* Set Tx modes */
 897    outb(D_TX_MODE, ioaddr + TX_MODE);
 898    /* set Rx modes */
 899    outb(ID_MATCHED, ioaddr + RX_MODE);
 900
 901    /* Set hardware address */
 902    for (i = 0; i < 6; i++) 
 903        outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
 904
 905    /* (re)initialize the multicast table */
 906    set_rx_mode(dev);
 907
 908    /* Switch to bank 2 (runtime mode) */
 909    if (lp->cardtype == MBH10302)
 910        outb(BANK_2, ioaddr + CONFIG_1);
 911    else
 912        outb(BANK_2U, ioaddr + CONFIG_1);
 913
 914    /* set 16col ctrl bits */
 915    if( lp->cardtype == TDK || lp->cardtype == CONTEC) 
 916        outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
 917    else
 918        outb(AUTO_MODE, ioaddr + COL_CTRL);
 919
 920    /* clear Reserved Regs */
 921    outb(0x00, ioaddr + BMPR12);
 922    outb(0x00, ioaddr + BMPR13);
 923
 924    /* reset Skip packet reg. */
 925    outb(0x01, ioaddr + RX_SKIP);
 926
 927    /* Enable Tx and Rx */
 928    if( sram_config == 0 )
 929        outb(CONFIG0_DFL, ioaddr + CONFIG_0);
 930    else
 931        outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
 932
 933    /* Init receive pointer ? */
 934    inw(ioaddr + DATAPORT);
 935    inw(ioaddr + DATAPORT);
 936
 937    /* Clear all status */
 938    outb(0xff, ioaddr + TX_STATUS);
 939    outb(0xff, ioaddr + RX_STATUS);
 940
 941    if (lp->cardtype == MBH10302)
 942        outb(INTR_OFF, ioaddr + LAN_CTRL);
 943
 944    /* Turn on Rx interrupts */
 945    outb(D_TX_INTR, ioaddr + TX_INTR);
 946    outb(D_RX_INTR, ioaddr + RX_INTR);
 947
 948    /* Turn on interrupts from LAN card controller */
 949    if (lp->cardtype == MBH10302)
 950        outb(INTR_ON, ioaddr + LAN_CTRL);
 951} /* fjn_reset */
 952
 953/*====================================================================*/
 954
 955static void fjn_rx(struct net_device *dev)
 956{
 957    unsigned int ioaddr = dev->base_addr;
 958    int boguscount = 10;        /* 5 -> 10: by agy 19940922 */
 959
 960    pr_debug("%s: in rx_packet(), rx_status %02x.\n",
 961          dev->name, inb(ioaddr + RX_STATUS));
 962
 963    while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 964        u_short status = inw(ioaddr + DATAPORT);
 965
 966        netdev_dbg(dev, "Rxing packet mode %02x status %04x.\n",
 967                   inb(ioaddr + RX_MODE), status);
 968#ifndef final_version
 969        if (status == 0) {
 970            outb(F_SKP_PKT, ioaddr + RX_SKIP);
 971            break;
 972        }
 973#endif
 974        if ((status & 0xF0) != 0x20) {  /* There was an error. */
 975            dev->stats.rx_errors++;
 976            if (status & F_LEN_ERR) dev->stats.rx_length_errors++;
 977            if (status & F_ALG_ERR) dev->stats.rx_frame_errors++;
 978            if (status & F_CRC_ERR) dev->stats.rx_crc_errors++;
 979            if (status & F_OVR_FLO) dev->stats.rx_over_errors++;
 980        } else {
 981            u_short pkt_len = inw(ioaddr + DATAPORT);
 982            /* Malloc up new buffer. */
 983            struct sk_buff *skb;
 984
 985            if (pkt_len > 1550) {
 986                netdev_notice(dev, "The FMV-18x claimed a very large packet, size %d\n",
 987                              pkt_len);
 988                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 989                dev->stats.rx_errors++;
 990                break;
 991            }
 992            skb = netdev_alloc_skb(dev, pkt_len + 2);
 993            if (skb == NULL) {
 994                outb(F_SKP_PKT, ioaddr + RX_SKIP);
 995                dev->stats.rx_dropped++;
 996                break;
 997            }
 998
 999            skb_reserve(skb, 2);
1000            insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
1001                 (pkt_len + 1) >> 1);
1002            skb->protocol = eth_type_trans(skb, dev);
1003
1004            {
1005                int i;
1006                pr_debug("%s: Rxed packet of length %d: ",
1007                        dev->name, pkt_len);
1008                for (i = 0; i < 14; i++)
1009                        pr_debug(" %02x", skb->data[i]);
1010                pr_debug(".\n");
1011            }
1012
1013            netif_rx(skb);
1014            dev->stats.rx_packets++;
1015            dev->stats.rx_bytes += pkt_len;
1016        }
1017        if (--boguscount <= 0)
1018            break;
1019    }
1020
1021    /* If any worth-while packets have been received, dev_rint()
1022           has done a netif_wake_queue() for us and will work on them
1023           when we get to the bottom-half routine. */
1024/*
1025    if (lp->cardtype != TDK) {
1026        int i;
1027        for (i = 0; i < 20; i++) {
1028            if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
1029                break;
1030            (void)inw(ioaddr + DATAPORT);  /+ dummy status read +/
1031            outb(F_SKP_PKT, ioaddr + RX_SKIP);
1032        }
1033
1034        if (i > 0)
1035            pr_debug("%s: Exint Rx packet with mode %02x after "
1036                  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
1037    }
1038*/
1039} /* fjn_rx */
1040
1041/*====================================================================*/
1042
1043static void netdev_get_drvinfo(struct net_device *dev,
1044                               struct ethtool_drvinfo *info)
1045{
1046        strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1047        strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1048        snprintf(info->bus_info, sizeof(info->bus_info),
1049                "PCMCIA 0x%lx", dev->base_addr);
1050}
1051
1052static const struct ethtool_ops netdev_ethtool_ops = {
1053        .get_drvinfo            = netdev_get_drvinfo,
1054};
1055
1056static int fjn_config(struct net_device *dev, struct ifmap *map){
1057    return 0;
1058}
1059
1060static int fjn_open(struct net_device *dev)
1061{
1062    struct local_info_t *lp = netdev_priv(dev);
1063    struct pcmcia_device *link = lp->p_dev;
1064
1065    pr_debug("fjn_open('%s').\n", dev->name);
1066
1067    if (!pcmcia_dev_present(link))
1068        return -ENODEV;
1069    
1070    link->open++;
1071    
1072    fjn_reset(dev);
1073    
1074    lp->tx_started = 0;
1075    lp->tx_queue = 0;
1076    lp->tx_queue_len = 0;
1077    lp->open_time = jiffies;
1078    netif_start_queue(dev);
1079    
1080    return 0;
1081} /* fjn_open */
1082
1083/*====================================================================*/
1084
1085static int fjn_close(struct net_device *dev)
1086{
1087    struct local_info_t *lp = netdev_priv(dev);
1088    struct pcmcia_device *link = lp->p_dev;
1089    unsigned int ioaddr = dev->base_addr;
1090
1091    pr_debug("fjn_close('%s').\n", dev->name);
1092
1093    lp->open_time = 0;
1094    netif_stop_queue(dev);
1095
1096    /* Set configuration register 0 to disable Tx and Rx. */
1097    if( sram_config == 0 ) 
1098        outb(CONFIG0_RST ,ioaddr + CONFIG_0);
1099    else
1100        outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
1101
1102    /* Update the statistics -- ToDo. */
1103
1104    /* Power-down the chip.  Green, green, green! */
1105    outb(CHIP_OFF ,ioaddr + CONFIG_1);
1106
1107    /* Set the ethernet adaptor disable IRQ */
1108    if (lp->cardtype == MBH10302)
1109        outb(INTR_OFF, ioaddr + LAN_CTRL);
1110
1111    link->open--;
1112
1113    return 0;
1114} /* fjn_close */
1115
1116/*====================================================================*/
1117
1118/*
1119  Set the multicast/promiscuous mode for this adaptor.
1120*/
1121
1122static void set_rx_mode(struct net_device *dev)
1123{
1124    unsigned int ioaddr = dev->base_addr;
1125    u_char mc_filter[8];                 /* Multicast hash filter */
1126    u_long flags;
1127    int i;
1128    
1129    int saved_bank;
1130    int saved_config_0 = inb(ioaddr + CONFIG_0);
1131     
1132    local_irq_save(flags); 
1133
1134    /* Disable Tx and Rx */
1135    if (sram_config == 0) 
1136        outb(CONFIG0_RST, ioaddr + CONFIG_0);
1137    else
1138        outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
1139
1140    if (dev->flags & IFF_PROMISC) {
1141        memset(mc_filter, 0xff, sizeof(mc_filter));
1142        outb(3, ioaddr + RX_MODE);      /* Enable promiscuous mode */
1143    } else if (netdev_mc_count(dev) > MC_FILTERBREAK ||
1144               (dev->flags & IFF_ALLMULTI)) {
1145        /* Too many to filter perfectly -- accept all multicasts. */
1146        memset(mc_filter, 0xff, sizeof(mc_filter));
1147        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1148    } else if (netdev_mc_empty(dev)) {
1149        memset(mc_filter, 0x00, sizeof(mc_filter));
1150        outb(1, ioaddr + RX_MODE);      /* Ignore almost all multicasts. */
1151    } else {
1152        struct netdev_hw_addr *ha;
1153
1154        memset(mc_filter, 0, sizeof(mc_filter));
1155        netdev_for_each_mc_addr(ha, dev) {
1156            unsigned int bit = ether_crc_le(ETH_ALEN, ha->addr) >> 26;
1157            mc_filter[bit >> 3] |= (1 << (bit & 7));
1158        }
1159        outb(2, ioaddr + RX_MODE);      /* Use normal mode. */
1160    }
1161
1162    /* Switch to bank 1 and set the multicast table. */
1163    saved_bank = inb(ioaddr + CONFIG_1);
1164    outb(0xe4, ioaddr + CONFIG_1);
1165
1166    for (i = 0; i < 8; i++)
1167        outb(mc_filter[i], ioaddr + MAR_ADR + i);
1168    outb(saved_bank, ioaddr + CONFIG_1);
1169
1170    outb(saved_config_0, ioaddr + CONFIG_0);
1171
1172    local_irq_restore(flags);
1173}
1174