linux/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2010 Broadcom Corporation
   3 * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
   4 *
   5 * Permission to use, copy, modify, and/or distribute this software for any
   6 * purpose with or without fee is hereby granted, provided that the above
   7 * copyright notice and this permission notice appear in all copies.
   8 *
   9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  12 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  14 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  15 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16 */
  17
  18#define __UNDEF_NO_VERSION__
  19#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21#include <linux/etherdevice.h>
  22#include <linux/sched.h>
  23#include <linux/firmware.h>
  24#include <linux/interrupt.h>
  25#include <linux/module.h>
  26#include <linux/bcma/bcma.h>
  27#include <net/mac80211.h>
  28#include <defs.h>
  29#include "phy/phy_int.h"
  30#include "d11.h"
  31#include "channel.h"
  32#include "scb.h"
  33#include "pub.h"
  34#include "ucode_loader.h"
  35#include "mac80211_if.h"
  36#include "main.h"
  37#include "debug.h"
  38#include "led.h"
  39
  40#define N_TX_QUEUES     4 /* #tx queues on mac80211<->driver interface */
  41#define BRCMS_FLUSH_TIMEOUT     500 /* msec */
  42
  43/* Flags we support */
  44#define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
  45        FIF_ALLMULTI | \
  46        FIF_FCSFAIL | \
  47        FIF_CONTROL | \
  48        FIF_OTHER_BSS | \
  49        FIF_BCN_PRBRESP_PROMISC | \
  50        FIF_PSPOLL)
  51
  52#define CHAN2GHZ(channel, freqency, chflags)  { \
  53        .band = IEEE80211_BAND_2GHZ, \
  54        .center_freq = (freqency), \
  55        .hw_value = (channel), \
  56        .flags = chflags, \
  57        .max_antenna_gain = 0, \
  58        .max_power = 19, \
  59}
  60
  61#define CHAN5GHZ(channel, chflags)  { \
  62        .band = IEEE80211_BAND_5GHZ, \
  63        .center_freq = 5000 + 5*(channel), \
  64        .hw_value = (channel), \
  65        .flags = chflags, \
  66        .max_antenna_gain = 0, \
  67        .max_power = 21, \
  68}
  69
  70#define RATE(rate100m, _flags) { \
  71        .bitrate = (rate100m), \
  72        .flags = (_flags), \
  73        .hw_value = (rate100m / 5), \
  74}
  75
  76struct firmware_hdr {
  77        __le32 offset;
  78        __le32 len;
  79        __le32 idx;
  80};
  81
  82static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
  83        "brcm/bcm43xx",
  84        NULL
  85};
  86
  87static int n_adapters_found;
  88
  89MODULE_AUTHOR("Broadcom Corporation");
  90MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
  91MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
  92MODULE_LICENSE("Dual BSD/GPL");
  93/* This needs to be adjusted when brcms_firmwares changes */
  94MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
  95MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
  96
  97/* recognized BCMA Core IDs */
  98static struct bcma_device_id brcms_coreid_table[] = {
  99        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
 100        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
 101        BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
 102        BCMA_CORETABLE_END
 103};
 104MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
 105
 106#if defined(CONFIG_BRCMDBG)
 107/*
 108 * Module parameter for setting the debug message level. Available
 109 * flags are specified by the BRCM_DL_* macros in
 110 * drivers/net/wireless/brcm80211/include/defs.h.
 111 */
 112module_param_named(debug, brcm_msg_level, uint, S_IRUGO | S_IWUSR);
 113#endif
 114
 115static struct ieee80211_channel brcms_2ghz_chantable[] = {
 116        CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
 117        CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
 118        CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
 119        CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
 120        CHAN2GHZ(5, 2432, 0),
 121        CHAN2GHZ(6, 2437, 0),
 122        CHAN2GHZ(7, 2442, 0),
 123        CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
 124        CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
 125        CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
 126        CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
 127        CHAN2GHZ(12, 2467,
 128                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 129                 IEEE80211_CHAN_NO_HT40PLUS),
 130        CHAN2GHZ(13, 2472,
 131                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 132                 IEEE80211_CHAN_NO_HT40PLUS),
 133        CHAN2GHZ(14, 2484,
 134                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 135                 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
 136                 IEEE80211_CHAN_NO_OFDM)
 137};
 138
 139static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
 140        /* UNII-1 */
 141        CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
 142        CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 143        CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 144        CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
 145        /* UNII-2 */
 146        CHAN5GHZ(52,
 147                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 148                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 149        CHAN5GHZ(56,
 150                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 151                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 152        CHAN5GHZ(60,
 153                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 154                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 155        CHAN5GHZ(64,
 156                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 157                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 158        /* MID */
 159        CHAN5GHZ(100,
 160                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 161                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 162        CHAN5GHZ(104,
 163                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 164                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 165        CHAN5GHZ(108,
 166                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 167                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 168        CHAN5GHZ(112,
 169                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 170                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 171        CHAN5GHZ(116,
 172                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 173                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 174        CHAN5GHZ(120,
 175                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 176                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 177        CHAN5GHZ(124,
 178                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 179                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 180        CHAN5GHZ(128,
 181                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 182                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 183        CHAN5GHZ(132,
 184                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 185                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 186        CHAN5GHZ(136,
 187                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 188                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 189        CHAN5GHZ(140,
 190                 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 191                 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
 192                 IEEE80211_CHAN_NO_HT40MINUS),
 193        /* UNII-3 */
 194        CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 195        CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
 196        CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
 197        CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
 198        CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
 199};
 200
 201/*
 202 * The rate table is used for both 2.4G and 5G rates. The
 203 * latter being a subset as it does not support CCK rates.
 204 */
 205static struct ieee80211_rate legacy_ratetable[] = {
 206        RATE(10, 0),
 207        RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
 208        RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
 209        RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
 210        RATE(60, 0),
 211        RATE(90, 0),
 212        RATE(120, 0),
 213        RATE(180, 0),
 214        RATE(240, 0),
 215        RATE(360, 0),
 216        RATE(480, 0),
 217        RATE(540, 0),
 218};
 219
 220static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
 221        .band = IEEE80211_BAND_2GHZ,
 222        .channels = brcms_2ghz_chantable,
 223        .n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
 224        .bitrates = legacy_ratetable,
 225        .n_bitrates = ARRAY_SIZE(legacy_ratetable),
 226        .ht_cap = {
 227                   /* from include/linux/ieee80211.h */
 228                   .cap = IEEE80211_HT_CAP_GRN_FLD |
 229                          IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
 230                   .ht_supported = true,
 231                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 232                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 233                   .mcs = {
 234                           /* placeholders for now */
 235                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 236                           .rx_highest = cpu_to_le16(500),
 237                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 238                   }
 239};
 240
 241static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
 242        .band = IEEE80211_BAND_5GHZ,
 243        .channels = brcms_5ghz_nphy_chantable,
 244        .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
 245        .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
 246        .n_bitrates = ARRAY_SIZE(legacy_ratetable) -
 247                        BRCMS_LEGACY_5G_RATE_OFFSET,
 248        .ht_cap = {
 249                   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
 250                          IEEE80211_HT_CAP_SGI_40,
 251                   .ht_supported = true,
 252                   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 253                   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 254                   .mcs = {
 255                           /* placeholders for now */
 256                           .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 257                           .rx_highest = cpu_to_le16(500),
 258                           .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 259                   }
 260};
 261
 262/* flags the given rate in rateset as requested */
 263static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
 264{
 265        u32 i;
 266
 267        for (i = 0; i < rs->count; i++) {
 268                if (rate != (rs->rates[i] & 0x7f))
 269                        continue;
 270
 271                if (is_br)
 272                        rs->rates[i] |= BRCMS_RATE_FLAG;
 273                else
 274                        rs->rates[i] &= BRCMS_RATE_MASK;
 275                return;
 276        }
 277}
 278
 279/**
 280 * This function frees the WL per-device resources.
 281 *
 282 * This function frees resources owned by the WL device pointed to
 283 * by the wl parameter.
 284 *
 285 * precondition: can both be called locked and unlocked
 286 *
 287 */
 288static void brcms_free(struct brcms_info *wl)
 289{
 290        struct brcms_timer *t, *next;
 291
 292        /* free ucode data */
 293        if (wl->fw.fw_cnt)
 294                brcms_ucode_data_free(&wl->ucode);
 295        if (wl->irq)
 296                free_irq(wl->irq, wl);
 297
 298        /* kill dpc */
 299        tasklet_kill(&wl->tasklet);
 300
 301        if (wl->pub) {
 302                brcms_debugfs_detach(wl->pub);
 303                brcms_c_module_unregister(wl->pub, "linux", wl);
 304        }
 305
 306        /* free common resources */
 307        if (wl->wlc) {
 308                brcms_c_detach(wl->wlc);
 309                wl->wlc = NULL;
 310                wl->pub = NULL;
 311        }
 312
 313        /* virtual interface deletion is deferred so we cannot spinwait */
 314
 315        /* wait for all pending callbacks to complete */
 316        while (atomic_read(&wl->callbacks) > 0)
 317                schedule();
 318
 319        /* free timers */
 320        for (t = wl->timers; t; t = next) {
 321                next = t->next;
 322#ifdef DEBUG
 323                kfree(t->name);
 324#endif
 325                kfree(t);
 326        }
 327}
 328
 329/*
 330* called from both kernel as from this kernel module (error flow on attach)
 331* precondition: perimeter lock is not acquired.
 332*/
 333static void brcms_remove(struct bcma_device *pdev)
 334{
 335        struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
 336        struct brcms_info *wl = hw->priv;
 337
 338        if (wl->wlc) {
 339                brcms_led_unregister(wl);
 340                wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
 341                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 342                ieee80211_unregister_hw(hw);
 343        }
 344
 345        brcms_free(wl);
 346
 347        bcma_set_drvdata(pdev, NULL);
 348        ieee80211_free_hw(hw);
 349}
 350
 351/*
 352 * Precondition: Since this function is called in brcms_pci_probe() context,
 353 * no locking is required.
 354 */
 355static void brcms_release_fw(struct brcms_info *wl)
 356{
 357        int i;
 358        for (i = 0; i < MAX_FW_IMAGES; i++) {
 359                release_firmware(wl->fw.fw_bin[i]);
 360                release_firmware(wl->fw.fw_hdr[i]);
 361        }
 362}
 363
 364/*
 365 * Precondition: Since this function is called in brcms_pci_probe() context,
 366 * no locking is required.
 367 */
 368static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
 369{
 370        int status;
 371        struct device *device = &pdev->dev;
 372        char fw_name[100];
 373        int i;
 374
 375        memset(&wl->fw, 0, sizeof(struct brcms_firmware));
 376        for (i = 0; i < MAX_FW_IMAGES; i++) {
 377                if (brcms_firmwares[i] == NULL)
 378                        break;
 379                sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
 380                        UCODE_LOADER_API_VER);
 381                status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
 382                if (status) {
 383                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 384                                  KBUILD_MODNAME, fw_name);
 385                        return status;
 386                }
 387                sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
 388                        UCODE_LOADER_API_VER);
 389                status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
 390                if (status) {
 391                        wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 392                                  KBUILD_MODNAME, fw_name);
 393                        return status;
 394                }
 395                wl->fw.hdr_num_entries[i] =
 396                    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
 397        }
 398        wl->fw.fw_cnt = i;
 399        status = brcms_ucode_data_init(wl, &wl->ucode);
 400        brcms_release_fw(wl);
 401        return status;
 402}
 403
 404static void brcms_ops_tx(struct ieee80211_hw *hw,
 405                         struct ieee80211_tx_control *control,
 406                         struct sk_buff *skb)
 407{
 408        struct brcms_info *wl = hw->priv;
 409        struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 410
 411        spin_lock_bh(&wl->lock);
 412        if (!wl->pub->up) {
 413                brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
 414                kfree_skb(skb);
 415                goto done;
 416        }
 417        if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
 418                tx_info->rate_driver_data[0] = control->sta;
 419 done:
 420        spin_unlock_bh(&wl->lock);
 421}
 422
 423static int brcms_ops_start(struct ieee80211_hw *hw)
 424{
 425        struct brcms_info *wl = hw->priv;
 426        bool blocked;
 427        int err;
 428
 429        ieee80211_wake_queues(hw);
 430        spin_lock_bh(&wl->lock);
 431        blocked = brcms_rfkill_set_hw_state(wl);
 432        spin_unlock_bh(&wl->lock);
 433        if (!blocked)
 434                wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 435
 436        if (!wl->ucode.bcm43xx_bomminor) {
 437                err = brcms_request_fw(wl, wl->wlc->hw->d11core);
 438                if (err) {
 439                        brcms_remove(wl->wlc->hw->d11core);
 440                        return -ENOENT;
 441                }
 442        }
 443
 444        spin_lock_bh(&wl->lock);
 445        /* avoid acknowledging frames before a non-monitor device is added */
 446        wl->mute_tx = true;
 447
 448        if (!wl->pub->up)
 449                if (!blocked)
 450                        err = brcms_up(wl);
 451                else
 452                        err = -ERFKILL;
 453        else
 454                err = -ENODEV;
 455        spin_unlock_bh(&wl->lock);
 456
 457        if (err != 0)
 458                brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
 459                          __func__, err);
 460        return err;
 461}
 462
 463static void brcms_ops_stop(struct ieee80211_hw *hw)
 464{
 465        struct brcms_info *wl = hw->priv;
 466        int status;
 467
 468        ieee80211_stop_queues(hw);
 469
 470        if (wl->wlc == NULL)
 471                return;
 472
 473        spin_lock_bh(&wl->lock);
 474        status = brcms_c_chipmatch(wl->wlc->hw->d11core);
 475        spin_unlock_bh(&wl->lock);
 476        if (!status) {
 477                brcms_err(wl->wlc->hw->d11core,
 478                          "wl: brcms_ops_stop: chipmatch failed\n");
 479                return;
 480        }
 481
 482        /* put driver in down state */
 483        spin_lock_bh(&wl->lock);
 484        brcms_down(wl);
 485        spin_unlock_bh(&wl->lock);
 486}
 487
 488static int
 489brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 490{
 491        struct brcms_info *wl = hw->priv;
 492
 493        /* Just STA, AP and ADHOC for now */
 494        if (vif->type != NL80211_IFTYPE_STATION &&
 495            vif->type != NL80211_IFTYPE_AP &&
 496            vif->type != NL80211_IFTYPE_ADHOC) {
 497                brcms_err(wl->wlc->hw->d11core,
 498                          "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
 499                          __func__, vif->type);
 500                return -EOPNOTSUPP;
 501        }
 502
 503        spin_lock_bh(&wl->lock);
 504        wl->mute_tx = false;
 505        brcms_c_mute(wl->wlc, false);
 506        if (vif->type == NL80211_IFTYPE_STATION)
 507                brcms_c_start_station(wl->wlc, vif->addr);
 508        else if (vif->type == NL80211_IFTYPE_AP)
 509                brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
 510                                 vif->bss_conf.ssid, vif->bss_conf.ssid_len);
 511        else if (vif->type == NL80211_IFTYPE_ADHOC)
 512                brcms_c_start_adhoc(wl->wlc, vif->addr);
 513        spin_unlock_bh(&wl->lock);
 514
 515        return 0;
 516}
 517
 518static void
 519brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 520{
 521}
 522
 523static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
 524{
 525        struct ieee80211_conf *conf = &hw->conf;
 526        struct brcms_info *wl = hw->priv;
 527        struct bcma_device *core = wl->wlc->hw->d11core;
 528        int err = 0;
 529        int new_int;
 530
 531        spin_lock_bh(&wl->lock);
 532        if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 533                brcms_c_set_beacon_listen_interval(wl->wlc,
 534                                                   conf->listen_interval);
 535        }
 536        if (changed & IEEE80211_CONF_CHANGE_MONITOR)
 537                brcms_dbg_info(core, "%s: change monitor mode: %s\n",
 538                               __func__, conf->flags & IEEE80211_CONF_MONITOR ?
 539                               "true" : "false");
 540        if (changed & IEEE80211_CONF_CHANGE_PS)
 541                brcms_err(core, "%s: change power-save mode: %s (implement)\n",
 542                          __func__, conf->flags & IEEE80211_CONF_PS ?
 543                          "true" : "false");
 544
 545        if (changed & IEEE80211_CONF_CHANGE_POWER) {
 546                err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
 547                if (err < 0) {
 548                        brcms_err(core, "%s: Error setting power_level\n",
 549                                  __func__);
 550                        goto config_out;
 551                }
 552                new_int = brcms_c_get_tx_power(wl->wlc);
 553                if (new_int != conf->power_level)
 554                        brcms_err(core,
 555                                  "%s: Power level req != actual, %d %d\n",
 556                                  __func__, conf->power_level,
 557                                  new_int);
 558        }
 559        if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 560                if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
 561                    conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
 562                        err = brcms_c_set_channel(wl->wlc,
 563                                                  conf->chandef.chan->hw_value);
 564                else
 565                        err = -ENOTSUPP;
 566        }
 567        if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 568                err = brcms_c_set_rate_limit(wl->wlc,
 569                                             conf->short_frame_max_tx_count,
 570                                             conf->long_frame_max_tx_count);
 571
 572 config_out:
 573        spin_unlock_bh(&wl->lock);
 574        return err;
 575}
 576
 577static void
 578brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
 579                        struct ieee80211_vif *vif,
 580                        struct ieee80211_bss_conf *info, u32 changed)
 581{
 582        struct brcms_info *wl = hw->priv;
 583        struct bcma_device *core = wl->wlc->hw->d11core;
 584
 585        if (changed & BSS_CHANGED_ASSOC) {
 586                /* association status changed (associated/disassociated)
 587                 * also implies a change in the AID.
 588                 */
 589                brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
 590                          __func__, info->assoc ? "" : "dis");
 591                spin_lock_bh(&wl->lock);
 592                brcms_c_associate_upd(wl->wlc, info->assoc);
 593                spin_unlock_bh(&wl->lock);
 594        }
 595        if (changed & BSS_CHANGED_ERP_SLOT) {
 596                s8 val;
 597
 598                /* slot timing changed */
 599                if (info->use_short_slot)
 600                        val = 1;
 601                else
 602                        val = 0;
 603                spin_lock_bh(&wl->lock);
 604                brcms_c_set_shortslot_override(wl->wlc, val);
 605                spin_unlock_bh(&wl->lock);
 606        }
 607
 608        if (changed & BSS_CHANGED_HT) {
 609                /* 802.11n parameters changed */
 610                u16 mode = info->ht_operation_mode;
 611
 612                spin_lock_bh(&wl->lock);
 613                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
 614                        mode & IEEE80211_HT_OP_MODE_PROTECTION);
 615                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
 616                        mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 617                brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
 618                        mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
 619                spin_unlock_bh(&wl->lock);
 620        }
 621        if (changed & BSS_CHANGED_BASIC_RATES) {
 622                struct ieee80211_supported_band *bi;
 623                u32 br_mask, i;
 624                u16 rate;
 625                struct brcm_rateset rs;
 626                int error;
 627
 628                /* retrieve the current rates */
 629                spin_lock_bh(&wl->lock);
 630                brcms_c_get_current_rateset(wl->wlc, &rs);
 631                spin_unlock_bh(&wl->lock);
 632
 633                br_mask = info->basic_rates;
 634                bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
 635                for (i = 0; i < bi->n_bitrates; i++) {
 636                        /* convert to internal rate value */
 637                        rate = (bi->bitrates[i].bitrate << 1) / 10;
 638
 639                        /* set/clear basic rate flag */
 640                        brcms_set_basic_rate(&rs, rate, br_mask & 1);
 641                        br_mask >>= 1;
 642                }
 643
 644                /* update the rate set */
 645                spin_lock_bh(&wl->lock);
 646                error = brcms_c_set_rateset(wl->wlc, &rs);
 647                spin_unlock_bh(&wl->lock);
 648                if (error)
 649                        brcms_err(core, "changing basic rates failed: %d\n",
 650                                  error);
 651        }
 652        if (changed & BSS_CHANGED_BEACON_INT) {
 653                /* Beacon interval changed */
 654                spin_lock_bh(&wl->lock);
 655                brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
 656                spin_unlock_bh(&wl->lock);
 657        }
 658        if (changed & BSS_CHANGED_BSSID) {
 659                /* BSSID changed, for whatever reason (IBSS and managed mode) */
 660                spin_lock_bh(&wl->lock);
 661                brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
 662                spin_unlock_bh(&wl->lock);
 663        }
 664        if (changed & BSS_CHANGED_SSID) {
 665                /* BSSID changed, for whatever reason (IBSS and managed mode) */
 666                spin_lock_bh(&wl->lock);
 667                brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len);
 668                spin_unlock_bh(&wl->lock);
 669        }
 670        if (changed & BSS_CHANGED_BEACON) {
 671                /* Beacon data changed, retrieve new beacon (beaconing modes) */
 672                struct sk_buff *beacon;
 673                u16 tim_offset = 0;
 674
 675                spin_lock_bh(&wl->lock);
 676                beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL);
 677                brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
 678                                       info->dtim_period);
 679                spin_unlock_bh(&wl->lock);
 680        }
 681
 682        if (changed & BSS_CHANGED_AP_PROBE_RESP) {
 683                struct sk_buff *probe_resp;
 684
 685                spin_lock_bh(&wl->lock);
 686                probe_resp = ieee80211_proberesp_get(hw, vif);
 687                brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
 688                spin_unlock_bh(&wl->lock);
 689        }
 690
 691        if (changed & BSS_CHANGED_BEACON_ENABLED) {
 692                /* Beaconing should be enabled/disabled (beaconing modes) */
 693                brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
 694                          info->enable_beacon ? "true" : "false");
 695                if (info->enable_beacon &&
 696                    hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
 697                        brcms_c_enable_probe_resp(wl->wlc, true);
 698                } else {
 699                        brcms_c_enable_probe_resp(wl->wlc, false);
 700                }
 701        }
 702
 703        if (changed & BSS_CHANGED_CQM) {
 704                /* Connection quality monitor config changed */
 705                brcms_err(core, "%s: cqm change: threshold %d, hys %d "
 706                          " (implement)\n", __func__, info->cqm_rssi_thold,
 707                          info->cqm_rssi_hyst);
 708        }
 709
 710        if (changed & BSS_CHANGED_IBSS) {
 711                /* IBSS join status changed */
 712                brcms_err(core, "%s: IBSS joined: %s (implement)\n",
 713                          __func__, info->ibss_joined ? "true" : "false");
 714        }
 715
 716        if (changed & BSS_CHANGED_ARP_FILTER) {
 717                /* Hardware ARP filter address list or state changed */
 718                brcms_err(core, "%s: arp filtering: %d addresses"
 719                          " (implement)\n", __func__, info->arp_addr_cnt);
 720        }
 721
 722        if (changed & BSS_CHANGED_QOS) {
 723                /*
 724                 * QoS for this association was enabled/disabled.
 725                 * Note that it is only ever disabled for station mode.
 726                 */
 727                brcms_err(core, "%s: qos enabled: %s (implement)\n",
 728                          __func__, info->qos ? "true" : "false");
 729        }
 730        return;
 731}
 732
 733static void
 734brcms_ops_configure_filter(struct ieee80211_hw *hw,
 735                        unsigned int changed_flags,
 736                        unsigned int *total_flags, u64 multicast)
 737{
 738        struct brcms_info *wl = hw->priv;
 739        struct bcma_device *core = wl->wlc->hw->d11core;
 740
 741        changed_flags &= MAC_FILTERS;
 742        *total_flags &= MAC_FILTERS;
 743
 744        if (changed_flags & FIF_PROMISC_IN_BSS)
 745                brcms_dbg_info(core, "FIF_PROMISC_IN_BSS\n");
 746        if (changed_flags & FIF_ALLMULTI)
 747                brcms_dbg_info(core, "FIF_ALLMULTI\n");
 748        if (changed_flags & FIF_FCSFAIL)
 749                brcms_dbg_info(core, "FIF_FCSFAIL\n");
 750        if (changed_flags & FIF_CONTROL)
 751                brcms_dbg_info(core, "FIF_CONTROL\n");
 752        if (changed_flags & FIF_OTHER_BSS)
 753                brcms_dbg_info(core, "FIF_OTHER_BSS\n");
 754        if (changed_flags & FIF_PSPOLL)
 755                brcms_dbg_info(core, "FIF_PSPOLL\n");
 756        if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
 757                brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
 758
 759        spin_lock_bh(&wl->lock);
 760        brcms_c_mac_promisc(wl->wlc, *total_flags);
 761        spin_unlock_bh(&wl->lock);
 762        return;
 763}
 764
 765static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw)
 766{
 767        struct brcms_info *wl = hw->priv;
 768        spin_lock_bh(&wl->lock);
 769        brcms_c_scan_start(wl->wlc);
 770        spin_unlock_bh(&wl->lock);
 771        return;
 772}
 773
 774static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw)
 775{
 776        struct brcms_info *wl = hw->priv;
 777        spin_lock_bh(&wl->lock);
 778        brcms_c_scan_stop(wl->wlc);
 779        spin_unlock_bh(&wl->lock);
 780        return;
 781}
 782
 783static int
 784brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
 785                  const struct ieee80211_tx_queue_params *params)
 786{
 787        struct brcms_info *wl = hw->priv;
 788
 789        spin_lock_bh(&wl->lock);
 790        brcms_c_wme_setparams(wl->wlc, queue, params, true);
 791        spin_unlock_bh(&wl->lock);
 792
 793        return 0;
 794}
 795
 796static int
 797brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 798               struct ieee80211_sta *sta)
 799{
 800        struct brcms_info *wl = hw->priv;
 801        struct scb *scb = &wl->wlc->pri_scb;
 802
 803        brcms_c_init_scb(scb);
 804
 805        wl->pub->global_ampdu = &(scb->scb_ampdu);
 806        wl->pub->global_ampdu->scb = scb;
 807        wl->pub->global_ampdu->max_pdu = 16;
 808
 809        /*
 810         * minstrel_ht initiates addBA on our behalf by calling
 811         * ieee80211_start_tx_ba_session()
 812         */
 813        return 0;
 814}
 815
 816static int
 817brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 818                    struct ieee80211_vif *vif,
 819                    enum ieee80211_ampdu_mlme_action action,
 820                    struct ieee80211_sta *sta, u16 tid, u16 *ssn,
 821                    u8 buf_size)
 822{
 823        struct brcms_info *wl = hw->priv;
 824        struct scb *scb = &wl->wlc->pri_scb;
 825        int status;
 826
 827        if (WARN_ON(scb->magic != SCB_MAGIC))
 828                return -EIDRM;
 829        switch (action) {
 830        case IEEE80211_AMPDU_RX_START:
 831                break;
 832        case IEEE80211_AMPDU_RX_STOP:
 833                break;
 834        case IEEE80211_AMPDU_TX_START:
 835                spin_lock_bh(&wl->lock);
 836                status = brcms_c_aggregatable(wl->wlc, tid);
 837                spin_unlock_bh(&wl->lock);
 838                if (!status) {
 839                        brcms_err(wl->wlc->hw->d11core,
 840                                  "START: tid %d is not agg\'able\n", tid);
 841                        return -EINVAL;
 842                }
 843                ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 844                break;
 845
 846        case IEEE80211_AMPDU_TX_STOP_CONT:
 847        case IEEE80211_AMPDU_TX_STOP_FLUSH:
 848        case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
 849                spin_lock_bh(&wl->lock);
 850                brcms_c_ampdu_flush(wl->wlc, sta, tid);
 851                spin_unlock_bh(&wl->lock);
 852                ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 853                break;
 854        case IEEE80211_AMPDU_TX_OPERATIONAL:
 855                /*
 856                 * BA window size from ADDBA response ('buf_size') defines how
 857                 * many outstanding MPDUs are allowed for the BA stream by
 858                 * recipient and traffic class. 'ampdu_factor' gives maximum
 859                 * AMPDU size.
 860                 */
 861                spin_lock_bh(&wl->lock);
 862                brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
 863                        (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 864                         sta->ht_cap.ampdu_factor)) - 1);
 865                spin_unlock_bh(&wl->lock);
 866                /* Power save wakeup */
 867                break;
 868        default:
 869                brcms_err(wl->wlc->hw->d11core,
 870                          "%s: Invalid command, ignoring\n", __func__);
 871        }
 872
 873        return 0;
 874}
 875
 876static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 877{
 878        struct brcms_info *wl = hw->priv;
 879        bool blocked;
 880
 881        spin_lock_bh(&wl->lock);
 882        blocked = brcms_c_check_radio_disabled(wl->wlc);
 883        spin_unlock_bh(&wl->lock);
 884
 885        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 886}
 887
 888static bool brcms_tx_flush_completed(struct brcms_info *wl)
 889{
 890        bool result;
 891
 892        spin_lock_bh(&wl->lock);
 893        result = brcms_c_tx_flush_completed(wl->wlc);
 894        spin_unlock_bh(&wl->lock);
 895        return result;
 896}
 897
 898static void brcms_ops_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
 899{
 900        struct brcms_info *wl = hw->priv;
 901        int ret;
 902
 903        no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 904
 905        ret = wait_event_timeout(wl->tx_flush_wq,
 906                                 brcms_tx_flush_completed(wl),
 907                                 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
 908
 909        brcms_dbg_mac80211(wl->wlc->hw->d11core,
 910                           "ret=%d\n", jiffies_to_msecs(ret));
 911}
 912
 913static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 914{
 915        struct brcms_info *wl = hw->priv;
 916        u64 tsf;
 917
 918        spin_lock_bh(&wl->lock);
 919        tsf = brcms_c_tsf_get(wl->wlc);
 920        spin_unlock_bh(&wl->lock);
 921
 922        return tsf;
 923}
 924
 925static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 926                           struct ieee80211_vif *vif, u64 tsf)
 927{
 928        struct brcms_info *wl = hw->priv;
 929
 930        spin_lock_bh(&wl->lock);
 931        brcms_c_tsf_set(wl->wlc, tsf);
 932        spin_unlock_bh(&wl->lock);
 933}
 934
 935static const struct ieee80211_ops brcms_ops = {
 936        .tx = brcms_ops_tx,
 937        .start = brcms_ops_start,
 938        .stop = brcms_ops_stop,
 939        .add_interface = brcms_ops_add_interface,
 940        .remove_interface = brcms_ops_remove_interface,
 941        .config = brcms_ops_config,
 942        .bss_info_changed = brcms_ops_bss_info_changed,
 943        .configure_filter = brcms_ops_configure_filter,
 944        .sw_scan_start = brcms_ops_sw_scan_start,
 945        .sw_scan_complete = brcms_ops_sw_scan_complete,
 946        .conf_tx = brcms_ops_conf_tx,
 947        .sta_add = brcms_ops_sta_add,
 948        .ampdu_action = brcms_ops_ampdu_action,
 949        .rfkill_poll = brcms_ops_rfkill_poll,
 950        .flush = brcms_ops_flush,
 951        .get_tsf = brcms_ops_get_tsf,
 952        .set_tsf = brcms_ops_set_tsf,
 953};
 954
 955void brcms_dpc(unsigned long data)
 956{
 957        struct brcms_info *wl;
 958
 959        wl = (struct brcms_info *) data;
 960
 961        spin_lock_bh(&wl->lock);
 962
 963        /* call the common second level interrupt handler */
 964        if (wl->pub->up) {
 965                if (wl->resched) {
 966                        unsigned long flags;
 967
 968                        spin_lock_irqsave(&wl->isr_lock, flags);
 969                        brcms_c_intrsupd(wl->wlc);
 970                        spin_unlock_irqrestore(&wl->isr_lock, flags);
 971                }
 972
 973                wl->resched = brcms_c_dpc(wl->wlc, true);
 974        }
 975
 976        /* brcms_c_dpc() may bring the driver down */
 977        if (!wl->pub->up)
 978                goto done;
 979
 980        /* re-schedule dpc */
 981        if (wl->resched)
 982                tasklet_schedule(&wl->tasklet);
 983        else
 984                /* re-enable interrupts */
 985                brcms_intrson(wl);
 986
 987 done:
 988        spin_unlock_bh(&wl->lock);
 989        wake_up(&wl->tx_flush_wq);
 990}
 991
 992static irqreturn_t brcms_isr(int irq, void *dev_id)
 993{
 994        struct brcms_info *wl;
 995        irqreturn_t ret = IRQ_NONE;
 996
 997        wl = (struct brcms_info *) dev_id;
 998
 999        spin_lock(&wl->isr_lock);
1000
1001        /* call common first level interrupt handler */
1002        if (brcms_c_isr(wl->wlc)) {
1003                /* schedule second level handler */
1004                tasklet_schedule(&wl->tasklet);
1005                ret = IRQ_HANDLED;
1006        }
1007
1008        spin_unlock(&wl->isr_lock);
1009
1010        return ret;
1011}
1012
1013/*
1014 * is called in brcms_pci_probe() context, therefore no locking required.
1015 */
1016static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1017{
1018        struct brcms_info *wl = hw->priv;
1019        struct brcms_c_info *wlc = wl->wlc;
1020        struct ieee80211_supported_band *band;
1021        int has_5g = 0;
1022        u16 phy_type;
1023
1024        hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1025        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1026
1027        phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1028        if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1029                band = &wlc->bandstate[BAND_2G_INDEX]->band;
1030                *band = brcms_band_2GHz_nphy_template;
1031                if (phy_type == PHY_TYPE_LCN) {
1032                        /* Single stream */
1033                        band->ht_cap.mcs.rx_mask[1] = 0;
1034                        band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1035                }
1036                hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
1037        } else {
1038                return -EPERM;
1039        }
1040
1041        /* Assume all bands use the same phy.  True for 11n devices. */
1042        if (wl->pub->_nbands > 1) {
1043                has_5g++;
1044                if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1045                        band = &wlc->bandstate[BAND_5G_INDEX]->band;
1046                        *band = brcms_band_5GHz_nphy_template;
1047                        hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
1048                } else {
1049                        return -EPERM;
1050                }
1051        }
1052        return 0;
1053}
1054
1055/*
1056 * is called in brcms_pci_probe() context, therefore no locking required.
1057 */
1058static int ieee_hw_init(struct ieee80211_hw *hw)
1059{
1060        hw->flags = IEEE80211_HW_SIGNAL_DBM
1061            /* | IEEE80211_HW_CONNECTION_MONITOR  What is this? */
1062            | IEEE80211_HW_REPORTS_TX_ACK_STATUS
1063            | IEEE80211_HW_AMPDU_AGGREGATION;
1064
1065        hw->extra_tx_headroom = brcms_c_get_header_len();
1066        hw->queues = N_TX_QUEUES;
1067        hw->max_rates = 2;      /* Primary rate and 1 fallback rate */
1068
1069        /* channel change time is dependent on chip and band  */
1070        hw->channel_change_time = 7 * 1000;
1071        hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1072                                     BIT(NL80211_IFTYPE_AP) |
1073                                     BIT(NL80211_IFTYPE_ADHOC);
1074
1075        /*
1076         * deactivate sending probe responses by ucude, because this will
1077         * cause problems when WPS is used.
1078         *
1079         * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1080         */
1081
1082        hw->rate_control_algorithm = "minstrel_ht";
1083
1084        hw->sta_data_size = 0;
1085        return ieee_hw_rate_init(hw);
1086}
1087
1088/**
1089 * attach to the WL device.
1090 *
1091 * Attach to the WL device identified by vendor and device parameters.
1092 * regs is a host accessible memory address pointing to WL device registers.
1093 *
1094 * brcms_attach is not defined as static because in the case where no bus
1095 * is defined, wl_attach will never be called, and thus, gcc will issue
1096 * a warning that this function is defined but not used if we declare
1097 * it as static.
1098 *
1099 *
1100 * is called in brcms_bcma_probe() context, therefore no locking required.
1101 */
1102static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1103{
1104        struct brcms_info *wl = NULL;
1105        int unit, err;
1106        struct ieee80211_hw *hw;
1107        u8 perm[ETH_ALEN];
1108
1109        unit = n_adapters_found;
1110        err = 0;
1111
1112        if (unit < 0)
1113                return NULL;
1114
1115        /* allocate private info */
1116        hw = bcma_get_drvdata(pdev);
1117        if (hw != NULL)
1118                wl = hw->priv;
1119        if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1120                return NULL;
1121        wl->wiphy = hw->wiphy;
1122
1123        atomic_set(&wl->callbacks, 0);
1124
1125        init_waitqueue_head(&wl->tx_flush_wq);
1126
1127        /* setup the bottom half handler */
1128        tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
1129
1130        spin_lock_init(&wl->lock);
1131        spin_lock_init(&wl->isr_lock);
1132
1133        /* common load-time initialization */
1134        wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1135        if (!wl->wlc) {
1136                wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1137                          KBUILD_MODNAME, err);
1138                goto fail;
1139        }
1140        wl->pub = brcms_c_pub(wl->wlc);
1141
1142        wl->pub->ieee_hw = hw;
1143
1144        /* register our interrupt handler */
1145        if (request_irq(pdev->irq, brcms_isr,
1146                        IRQF_SHARED, KBUILD_MODNAME, wl)) {
1147                wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1148                goto fail;
1149        }
1150        wl->irq = pdev->irq;
1151
1152        /* register module */
1153        brcms_c_module_register(wl->pub, "linux", wl, NULL);
1154
1155        if (ieee_hw_init(hw)) {
1156                wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1157                          __func__);
1158                goto fail;
1159        }
1160
1161        brcms_c_regd_init(wl->wlc);
1162
1163        memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1164        if (WARN_ON(!is_valid_ether_addr(perm)))
1165                goto fail;
1166        SET_IEEE80211_PERM_ADDR(hw, perm);
1167
1168        err = ieee80211_register_hw(hw);
1169        if (err)
1170                wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1171                          "%d\n", __func__, err);
1172
1173        if (wl->pub->srom_ccode[0] &&
1174            regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1175                wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1176
1177        brcms_debugfs_attach(wl->pub);
1178        brcms_debugfs_create_files(wl->pub);
1179        n_adapters_found++;
1180        return wl;
1181
1182fail:
1183        brcms_free(wl);
1184        return NULL;
1185}
1186
1187
1188
1189/**
1190 * determines if a device is a WL device, and if so, attaches it.
1191 *
1192 * This function determines if a device pointed to by pdev is a WL device,
1193 * and if so, performs a brcms_attach() on it.
1194 *
1195 * Perimeter lock is initialized in the course of this function.
1196 */
1197static int brcms_bcma_probe(struct bcma_device *pdev)
1198{
1199        struct brcms_info *wl;
1200        struct ieee80211_hw *hw;
1201
1202        dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1203                 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1204                 pdev->irq);
1205
1206        if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1207            (pdev->id.id != BCMA_CORE_80211))
1208                return -ENODEV;
1209
1210        hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1211        if (!hw) {
1212                pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1213                return -ENOMEM;
1214        }
1215
1216        SET_IEEE80211_DEV(hw, &pdev->dev);
1217
1218        bcma_set_drvdata(pdev, hw);
1219
1220        memset(hw->priv, 0, sizeof(*wl));
1221
1222        wl = brcms_attach(pdev);
1223        if (!wl) {
1224                pr_err("%s: brcms_attach failed!\n", __func__);
1225                return -ENODEV;
1226        }
1227        brcms_led_register(wl);
1228
1229        return 0;
1230}
1231
1232static int brcms_suspend(struct bcma_device *pdev)
1233{
1234        struct brcms_info *wl;
1235        struct ieee80211_hw *hw;
1236
1237        hw = bcma_get_drvdata(pdev);
1238        wl = hw->priv;
1239        if (!wl) {
1240                pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1241                       __func__);
1242                return -ENODEV;
1243        }
1244
1245        /* only need to flag hw is down for proper resume */
1246        spin_lock_bh(&wl->lock);
1247        wl->pub->hw_up = false;
1248        spin_unlock_bh(&wl->lock);
1249
1250        brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1251
1252        return 0;
1253}
1254
1255static int brcms_resume(struct bcma_device *pdev)
1256{
1257        return 0;
1258}
1259
1260static struct bcma_driver brcms_bcma_driver = {
1261        .name     = KBUILD_MODNAME,
1262        .probe    = brcms_bcma_probe,
1263        .suspend  = brcms_suspend,
1264        .resume   = brcms_resume,
1265        .remove   = brcms_remove,
1266        .id_table = brcms_coreid_table,
1267};
1268
1269/**
1270 * This is the main entry point for the brcmsmac driver.
1271 *
1272 * This function is scheduled upon module initialization and
1273 * does the driver registration, which result in brcms_bcma_probe()
1274 * call resulting in the driver bringup.
1275 */
1276static void brcms_driver_init(struct work_struct *work)
1277{
1278        int error;
1279
1280        error = bcma_driver_register(&brcms_bcma_driver);
1281        if (error)
1282                pr_err("%s: register returned %d\n", __func__, error);
1283}
1284
1285static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1286
1287static int __init brcms_module_init(void)
1288{
1289        brcms_debugfs_init();
1290        if (!schedule_work(&brcms_driver_work))
1291                return -EBUSY;
1292
1293        return 0;
1294}
1295
1296/**
1297 * This function unloads the brcmsmac driver from the system.
1298 *
1299 * This function unconditionally unloads the brcmsmac driver module from the
1300 * system.
1301 *
1302 */
1303static void __exit brcms_module_exit(void)
1304{
1305        cancel_work_sync(&brcms_driver_work);
1306        bcma_driver_unregister(&brcms_bcma_driver);
1307        brcms_debugfs_exit();
1308}
1309
1310module_init(brcms_module_init);
1311module_exit(brcms_module_exit);
1312
1313/*
1314 * precondition: perimeter lock has been acquired
1315 */
1316void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1317                         bool state, int prio)
1318{
1319        brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1320}
1321
1322/*
1323 * precondition: perimeter lock has been acquired
1324 */
1325void brcms_init(struct brcms_info *wl)
1326{
1327        brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1328                       wl->pub->unit);
1329        brcms_reset(wl);
1330        brcms_c_init(wl->wlc, wl->mute_tx);
1331}
1332
1333/*
1334 * precondition: perimeter lock has been acquired
1335 */
1336uint brcms_reset(struct brcms_info *wl)
1337{
1338        brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1339        brcms_c_reset(wl->wlc);
1340
1341        /* dpc will not be rescheduled */
1342        wl->resched = false;
1343
1344        /* inform publicly that interface is down */
1345        wl->pub->up = false;
1346
1347        return 0;
1348}
1349
1350void brcms_fatal_error(struct brcms_info *wl)
1351{
1352        brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1353                  wl->wlc->pub->unit);
1354        brcms_reset(wl);
1355        ieee80211_restart_hw(wl->pub->ieee_hw);
1356}
1357
1358/*
1359 * These are interrupt on/off entry points. Disable interrupts
1360 * during interrupt state transition.
1361 */
1362void brcms_intrson(struct brcms_info *wl)
1363{
1364        unsigned long flags;
1365
1366        spin_lock_irqsave(&wl->isr_lock, flags);
1367        brcms_c_intrson(wl->wlc);
1368        spin_unlock_irqrestore(&wl->isr_lock, flags);
1369}
1370
1371u32 brcms_intrsoff(struct brcms_info *wl)
1372{
1373        unsigned long flags;
1374        u32 status;
1375
1376        spin_lock_irqsave(&wl->isr_lock, flags);
1377        status = brcms_c_intrsoff(wl->wlc);
1378        spin_unlock_irqrestore(&wl->isr_lock, flags);
1379        return status;
1380}
1381
1382void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1383{
1384        unsigned long flags;
1385
1386        spin_lock_irqsave(&wl->isr_lock, flags);
1387        brcms_c_intrsrestore(wl->wlc, macintmask);
1388        spin_unlock_irqrestore(&wl->isr_lock, flags);
1389}
1390
1391/*
1392 * precondition: perimeter lock has been acquired
1393 */
1394int brcms_up(struct brcms_info *wl)
1395{
1396        int error = 0;
1397
1398        if (wl->pub->up)
1399                return 0;
1400
1401        error = brcms_c_up(wl->wlc);
1402
1403        return error;
1404}
1405
1406/*
1407 * precondition: perimeter lock has been acquired
1408 */
1409void brcms_down(struct brcms_info *wl)
1410{
1411        uint callbacks, ret_val = 0;
1412
1413        /* call common down function */
1414        ret_val = brcms_c_down(wl->wlc);
1415        callbacks = atomic_read(&wl->callbacks) - ret_val;
1416
1417        /* wait for down callbacks to complete */
1418        spin_unlock_bh(&wl->lock);
1419
1420        /* For HIGH_only driver, it's important to actually schedule other work,
1421         * not just spin wait since everything runs at schedule level
1422         */
1423        SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1424
1425        spin_lock_bh(&wl->lock);
1426}
1427
1428/*
1429* precondition: perimeter lock is not acquired
1430 */
1431static void _brcms_timer(struct work_struct *work)
1432{
1433        struct brcms_timer *t = container_of(work, struct brcms_timer,
1434                                             dly_wrk.work);
1435
1436        spin_lock_bh(&t->wl->lock);
1437
1438        if (t->set) {
1439                if (t->periodic) {
1440                        atomic_inc(&t->wl->callbacks);
1441                        ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1442                                                     &t->dly_wrk,
1443                                                     msecs_to_jiffies(t->ms));
1444                } else {
1445                        t->set = false;
1446                }
1447
1448                t->fn(t->arg);
1449        }
1450
1451        atomic_dec(&t->wl->callbacks);
1452
1453        spin_unlock_bh(&t->wl->lock);
1454}
1455
1456/*
1457 * Adds a timer to the list. Caller supplies a timer function.
1458 * Is called from wlc.
1459 *
1460 * precondition: perimeter lock has been acquired
1461 */
1462struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1463                                     void (*fn) (void *arg),
1464                                     void *arg, const char *name)
1465{
1466        struct brcms_timer *t;
1467
1468        t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1469        if (!t)
1470                return NULL;
1471
1472        INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1473        t->wl = wl;
1474        t->fn = fn;
1475        t->arg = arg;
1476        t->next = wl->timers;
1477        wl->timers = t;
1478
1479#ifdef DEBUG
1480        t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
1481        if (t->name)
1482                strcpy(t->name, name);
1483#endif
1484
1485        return t;
1486}
1487
1488/*
1489 * adds only the kernel timer since it's going to be more accurate
1490 * as well as it's easier to make it periodic
1491 *
1492 * precondition: perimeter lock has been acquired
1493 */
1494void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1495{
1496        struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1497
1498#ifdef DEBUG
1499        if (t->set)
1500                brcms_dbg_info(t->wl->wlc->hw->d11core,
1501                               "%s: Already set. Name: %s, per %d\n",
1502                               __func__, t->name, periodic);
1503#endif
1504        t->ms = ms;
1505        t->periodic = (bool) periodic;
1506        if (!t->set) {
1507                t->set = true;
1508                atomic_inc(&t->wl->callbacks);
1509        }
1510
1511        ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1512}
1513
1514/*
1515 * return true if timer successfully deleted, false if still pending
1516 *
1517 * precondition: perimeter lock has been acquired
1518 */
1519bool brcms_del_timer(struct brcms_timer *t)
1520{
1521        if (t->set) {
1522                t->set = false;
1523                if (!cancel_delayed_work(&t->dly_wrk))
1524                        return false;
1525
1526                atomic_dec(&t->wl->callbacks);
1527        }
1528
1529        return true;
1530}
1531
1532/*
1533 * precondition: perimeter lock has been acquired
1534 */
1535void brcms_free_timer(struct brcms_timer *t)
1536{
1537        struct brcms_info *wl = t->wl;
1538        struct brcms_timer *tmp;
1539
1540        /* delete the timer in case it is active */
1541        brcms_del_timer(t);
1542
1543        if (wl->timers == t) {
1544                wl->timers = wl->timers->next;
1545#ifdef DEBUG
1546                kfree(t->name);
1547#endif
1548                kfree(t);
1549                return;
1550
1551        }
1552
1553        tmp = wl->timers;
1554        while (tmp) {
1555                if (tmp->next == t) {
1556                        tmp->next = t->next;
1557#ifdef DEBUG
1558                        kfree(t->name);
1559#endif
1560                        kfree(t);
1561                        return;
1562                }
1563                tmp = tmp->next;
1564        }
1565
1566}
1567
1568/*
1569 * precondition: perimeter lock has been acquired
1570 */
1571int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1572{
1573        int i, entry;
1574        const u8 *pdata;
1575        struct firmware_hdr *hdr;
1576        for (i = 0; i < wl->fw.fw_cnt; i++) {
1577                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1578                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1579                     entry++, hdr++) {
1580                        u32 len = le32_to_cpu(hdr->len);
1581                        if (le32_to_cpu(hdr->idx) == idx) {
1582                                pdata = wl->fw.fw_bin[i]->data +
1583                                        le32_to_cpu(hdr->offset);
1584                                *pbuf = kmemdup(pdata, len, GFP_ATOMIC);
1585                                if (*pbuf == NULL)
1586                                        goto fail;
1587
1588                                return 0;
1589                        }
1590                }
1591        }
1592        brcms_err(wl->wlc->hw->d11core,
1593                  "ERROR: ucode buf tag:%d can not be found!\n", idx);
1594        *pbuf = NULL;
1595fail:
1596        return -ENODATA;
1597}
1598
1599/*
1600 * Precondition: Since this function is called in brcms_bcma_probe() context,
1601 * no locking is required.
1602 */
1603int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1604{
1605        int i, entry;
1606        const u8 *pdata;
1607        struct firmware_hdr *hdr;
1608        for (i = 0; i < wl->fw.fw_cnt; i++) {
1609                hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1610                for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1611                     entry++, hdr++) {
1612                        if (le32_to_cpu(hdr->idx) == idx) {
1613                                pdata = wl->fw.fw_bin[i]->data +
1614                                        le32_to_cpu(hdr->offset);
1615                                if (le32_to_cpu(hdr->len) != 4) {
1616                                        brcms_err(wl->wlc->hw->d11core,
1617                                                  "ERROR: fw hdr len\n");
1618                                        return -ENOMSG;
1619                                }
1620                                *n_bytes = le32_to_cpu(*((__le32 *) pdata));
1621                                return 0;
1622                        }
1623                }
1624        }
1625        brcms_err(wl->wlc->hw->d11core,
1626                  "ERROR: ucode tag:%d can not be found!\n", idx);
1627        return -ENOMSG;
1628}
1629
1630/*
1631 * precondition: can both be called locked and unlocked
1632 */
1633void brcms_ucode_free_buf(void *p)
1634{
1635        kfree(p);
1636}
1637
1638/*
1639 * checks validity of all firmware images loaded from user space
1640 *
1641 * Precondition: Since this function is called in brcms_bcma_probe() context,
1642 * no locking is required.
1643 */
1644int brcms_check_firmwares(struct brcms_info *wl)
1645{
1646        int i;
1647        int entry;
1648        int rc = 0;
1649        const struct firmware *fw;
1650        const struct firmware *fw_hdr;
1651        struct firmware_hdr *ucode_hdr;
1652        for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1653                fw =  wl->fw.fw_bin[i];
1654                fw_hdr = wl->fw.fw_hdr[i];
1655                if (fw == NULL && fw_hdr == NULL) {
1656                        break;
1657                } else if (fw == NULL || fw_hdr == NULL) {
1658                        wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1659                                  __func__);
1660                        rc = -EBADF;
1661                } else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1662                        wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1663                                "size %zu/%zu\n", __func__, fw_hdr->size,
1664                                sizeof(struct firmware_hdr));
1665                        rc = -EBADF;
1666                } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1667                        wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1668                                  __func__, fw->size);
1669                        rc = -EBADF;
1670                } else {
1671                        /* check if ucode section overruns firmware image */
1672                        ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1673                        for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1674                             !rc; entry++, ucode_hdr++) {
1675                                if (le32_to_cpu(ucode_hdr->offset) +
1676                                    le32_to_cpu(ucode_hdr->len) >
1677                                    fw->size) {
1678                                        wiphy_err(wl->wiphy,
1679                                                  "%s: conflicting bin/hdr\n",
1680                                                  __func__);
1681                                        rc = -EBADF;
1682                                }
1683                        }
1684                }
1685        }
1686        if (rc == 0 && wl->fw.fw_cnt != i) {
1687                wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1688                        wl->fw.fw_cnt);
1689                rc = -EBADF;
1690        }
1691        return rc;
1692}
1693
1694/*
1695 * precondition: perimeter lock has been acquired
1696 */
1697bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1698{
1699        bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1700
1701        spin_unlock_bh(&wl->lock);
1702        wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1703        if (blocked)
1704                wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1705        spin_lock_bh(&wl->lock);
1706        return blocked;
1707}
1708