linux/drivers/net/wireless/p54/eeprom.c
<<
>>
Prefs
   1/*
   2 * EEPROM parser code for mac80211 Prism54 drivers
   3 *
   4 * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
   5 * Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
   6 * Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
   7 *
   8 * Based on:
   9 * - the islsm (softmac prism54) driver, which is:
  10 *   Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
  11 * - stlc45xx driver
  12 *   Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
  13 *
  14 * This program is free software; you can redistribute it and/or modify
  15 * it under the terms of the GNU General Public License version 2 as
  16 * published by the Free Software Foundation.
  17 */
  18
  19#include <linux/init.h>
  20#include <linux/firmware.h>
  21#include <linux/etherdevice.h>
  22#include <linux/sort.h>
  23#include <linux/slab.h>
  24
  25#include <net/mac80211.h>
  26#include <linux/crc-ccitt.h>
  27#include <linux/export.h>
  28
  29#include "p54.h"
  30#include "eeprom.h"
  31#include "lmac.h"
  32
  33static struct ieee80211_rate p54_bgrates[] = {
  34        { .bitrate = 10, .hw_value = 0, },
  35        { .bitrate = 20, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
  36        { .bitrate = 55, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
  37        { .bitrate = 110, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
  38        { .bitrate = 60, .hw_value = 4, },
  39        { .bitrate = 90, .hw_value = 5, },
  40        { .bitrate = 120, .hw_value = 6, },
  41        { .bitrate = 180, .hw_value = 7, },
  42        { .bitrate = 240, .hw_value = 8, },
  43        { .bitrate = 360, .hw_value = 9, },
  44        { .bitrate = 480, .hw_value = 10, },
  45        { .bitrate = 540, .hw_value = 11, },
  46};
  47
  48static struct ieee80211_rate p54_arates[] = {
  49        { .bitrate = 60, .hw_value = 4, },
  50        { .bitrate = 90, .hw_value = 5, },
  51        { .bitrate = 120, .hw_value = 6, },
  52        { .bitrate = 180, .hw_value = 7, },
  53        { .bitrate = 240, .hw_value = 8, },
  54        { .bitrate = 360, .hw_value = 9, },
  55        { .bitrate = 480, .hw_value = 10, },
  56        { .bitrate = 540, .hw_value = 11, },
  57};
  58
  59static struct p54_rssi_db_entry p54_rssi_default = {
  60        /*
  61         * The defaults are taken from usb-logs of the
  62         * vendor driver. So, they should be safe to
  63         * use in case we can't get a match from the
  64         * rssi <-> dBm conversion database.
  65         */
  66        .mul = 130,
  67        .add = -398,
  68};
  69
  70#define CHAN_HAS_CAL            BIT(0)
  71#define CHAN_HAS_LIMIT          BIT(1)
  72#define CHAN_HAS_CURVE          BIT(2)
  73#define CHAN_HAS_ALL            (CHAN_HAS_CAL | CHAN_HAS_LIMIT | CHAN_HAS_CURVE)
  74
  75struct p54_channel_entry {
  76        u16 freq;
  77        u16 data;
  78        int index;
  79        int max_power;
  80        enum ieee80211_band band;
  81};
  82
  83struct p54_channel_list {
  84        struct p54_channel_entry *channels;
  85        size_t entries;
  86        size_t max_entries;
  87        size_t band_channel_num[IEEE80211_NUM_BANDS];
  88};
  89
  90static int p54_get_band_from_freq(u16 freq)
  91{
  92        /* FIXME: sync these values with the 802.11 spec */
  93
  94        if ((freq >= 2412) && (freq <= 2484))
  95                return IEEE80211_BAND_2GHZ;
  96
  97        if ((freq >= 4920) && (freq <= 5825))
  98                return IEEE80211_BAND_5GHZ;
  99
 100        return -1;
 101}
 102
 103static int same_band(u16 freq, u16 freq2)
 104{
 105        return p54_get_band_from_freq(freq) == p54_get_band_from_freq(freq2);
 106}
 107
 108static int p54_compare_channels(const void *_a,
 109                                const void *_b)
 110{
 111        const struct p54_channel_entry *a = _a;
 112        const struct p54_channel_entry *b = _b;
 113
 114        return a->freq - b->freq;
 115}
 116
 117static int p54_compare_rssichan(const void *_a,
 118                                const void *_b)
 119{
 120        const struct p54_rssi_db_entry *a = _a;
 121        const struct p54_rssi_db_entry *b = _b;
 122
 123        return a->freq - b->freq;
 124}
 125
 126static int p54_fill_band_bitrates(struct ieee80211_hw *dev,
 127                                  struct ieee80211_supported_band *band_entry,
 128                                  enum ieee80211_band band)
 129{
 130        /* TODO: generate rate array dynamically */
 131
 132        switch (band) {
 133        case IEEE80211_BAND_2GHZ:
 134                band_entry->bitrates = p54_bgrates;
 135                band_entry->n_bitrates = ARRAY_SIZE(p54_bgrates);
 136                break;
 137        case IEEE80211_BAND_5GHZ:
 138                band_entry->bitrates = p54_arates;
 139                band_entry->n_bitrates = ARRAY_SIZE(p54_arates);
 140                break;
 141        default:
 142                return -EINVAL;
 143        }
 144
 145        return 0;
 146}
 147
 148static int p54_generate_band(struct ieee80211_hw *dev,
 149                             struct p54_channel_list *list,
 150                             unsigned int *chan_num,
 151                             enum ieee80211_band band)
 152{
 153        struct p54_common *priv = dev->priv;
 154        struct ieee80211_supported_band *tmp, *old;
 155        unsigned int i, j;
 156        int ret = -ENOMEM;
 157
 158        if ((!list->entries) || (!list->band_channel_num[band]))
 159                return -EINVAL;
 160
 161        tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
 162        if (!tmp)
 163                goto err_out;
 164
 165        tmp->channels = kzalloc(sizeof(struct ieee80211_channel) *
 166                                list->band_channel_num[band], GFP_KERNEL);
 167        if (!tmp->channels)
 168                goto err_out;
 169
 170        ret = p54_fill_band_bitrates(dev, tmp, band);
 171        if (ret)
 172                goto err_out;
 173
 174        for (i = 0, j = 0; (j < list->band_channel_num[band]) &&
 175                           (i < list->entries); i++) {
 176                struct p54_channel_entry *chan = &list->channels[i];
 177                struct ieee80211_channel *dest = &tmp->channels[j];
 178
 179                if (chan->band != band)
 180                        continue;
 181
 182                if (chan->data != CHAN_HAS_ALL) {
 183                        wiphy_err(dev->wiphy, "%s%s%s is/are missing for "
 184                                  "channel:%d [%d MHz].\n",
 185                                  (chan->data & CHAN_HAS_CAL ? "" :
 186                                   " [iqauto calibration data]"),
 187                                  (chan->data & CHAN_HAS_LIMIT ? "" :
 188                                   " [output power limits]"),
 189                                  (chan->data & CHAN_HAS_CURVE ? "" :
 190                                   " [curve data]"),
 191                                  chan->index, chan->freq);
 192                        continue;
 193                }
 194
 195                dest->band = chan->band;
 196                dest->center_freq = chan->freq;
 197                dest->max_power = chan->max_power;
 198                priv->survey[*chan_num].channel = &tmp->channels[j];
 199                priv->survey[*chan_num].filled = SURVEY_INFO_NOISE_DBM |
 200                        SURVEY_INFO_CHANNEL_TIME |
 201                        SURVEY_INFO_CHANNEL_TIME_BUSY |
 202                        SURVEY_INFO_CHANNEL_TIME_TX;
 203                dest->hw_value = (*chan_num);
 204                j++;
 205                (*chan_num)++;
 206        }
 207
 208        if (j == 0) {
 209                wiphy_err(dev->wiphy, "Disabling totally damaged %d GHz band\n",
 210                          (band == IEEE80211_BAND_2GHZ) ? 2 : 5);
 211
 212                ret = -ENODATA;
 213                goto err_out;
 214        }
 215
 216        tmp->n_channels = j;
 217        old = priv->band_table[band];
 218        priv->band_table[band] = tmp;
 219        if (old) {
 220                kfree(old->channels);
 221                kfree(old);
 222        }
 223
 224        return 0;
 225
 226err_out:
 227        if (tmp) {
 228                kfree(tmp->channels);
 229                kfree(tmp);
 230        }
 231
 232        return ret;
 233}
 234
 235static struct p54_channel_entry *p54_update_channel_param(struct p54_channel_list *list,
 236                                                          u16 freq, u16 data)
 237{
 238        int i;
 239        struct p54_channel_entry *entry = NULL;
 240
 241        /*
 242         * usually all lists in the eeprom are mostly sorted.
 243         * so it's very likely that the entry we are looking for
 244         * is right at the end of the list
 245         */
 246        for (i = list->entries; i >= 0; i--) {
 247                if (freq == list->channels[i].freq) {
 248                        entry = &list->channels[i];
 249                        break;
 250                }
 251        }
 252
 253        if ((i < 0) && (list->entries < list->max_entries)) {
 254                /* entry does not exist yet. Initialize a new one. */
 255                int band = p54_get_band_from_freq(freq);
 256
 257                /*
 258                 * filter out frequencies which don't belong into
 259                 * any supported band.
 260                 */
 261                if (band >= 0) {
 262                        i = list->entries++;
 263                        list->band_channel_num[band]++;
 264
 265                        entry = &list->channels[i];
 266                        entry->freq = freq;
 267                        entry->band = band;
 268                        entry->index = ieee80211_frequency_to_channel(freq);
 269                        entry->max_power = 0;
 270                        entry->data = 0;
 271                }
 272        }
 273
 274        if (entry)
 275                entry->data |= data;
 276
 277        return entry;
 278}
 279
 280static int p54_get_maxpower(struct p54_common *priv, void *data)
 281{
 282        switch (priv->rxhw & PDR_SYNTH_FRONTEND_MASK) {
 283        case PDR_SYNTH_FRONTEND_LONGBOW: {
 284                struct pda_channel_output_limit_longbow *pda = data;
 285                int j;
 286                u16 rawpower = 0;
 287                pda = data;
 288                for (j = 0; j < ARRAY_SIZE(pda->point); j++) {
 289                        struct pda_channel_output_limit_point_longbow *point =
 290                                &pda->point[j];
 291                        rawpower = max_t(u16,
 292                                rawpower, le16_to_cpu(point->val_qpsk));
 293                        rawpower = max_t(u16,
 294                                rawpower, le16_to_cpu(point->val_bpsk));
 295                        rawpower = max_t(u16,
 296                                rawpower, le16_to_cpu(point->val_16qam));
 297                        rawpower = max_t(u16,
 298                                rawpower, le16_to_cpu(point->val_64qam));
 299                }
 300                /* longbow seems to use 1/16 dBm units */
 301                return rawpower / 16;
 302                }
 303
 304        case PDR_SYNTH_FRONTEND_DUETTE3:
 305        case PDR_SYNTH_FRONTEND_DUETTE2:
 306        case PDR_SYNTH_FRONTEND_FRISBEE:
 307        case PDR_SYNTH_FRONTEND_XBOW: {
 308                struct pda_channel_output_limit *pda = data;
 309                u8 rawpower = 0;
 310                rawpower = max(rawpower, pda->val_qpsk);
 311                rawpower = max(rawpower, pda->val_bpsk);
 312                rawpower = max(rawpower, pda->val_16qam);
 313                rawpower = max(rawpower, pda->val_64qam);
 314                /* raw values are in 1/4 dBm units */
 315                return rawpower / 4;
 316                }
 317
 318        default:
 319                return 20;
 320        }
 321}
 322
 323static int p54_generate_channel_lists(struct ieee80211_hw *dev)
 324{
 325        struct p54_common *priv = dev->priv;
 326        struct p54_channel_list *list;
 327        unsigned int i, j, k, max_channel_num;
 328        int ret = 0;
 329        u16 freq;
 330
 331        if ((priv->iq_autocal_len != priv->curve_data->entries) ||
 332            (priv->iq_autocal_len != priv->output_limit->entries))
 333                wiphy_err(dev->wiphy,
 334                          "Unsupported or damaged EEPROM detected. "
 335                          "You may not be able to use all channels.\n");
 336
 337        max_channel_num = max_t(unsigned int, priv->output_limit->entries,
 338                                priv->iq_autocal_len);
 339        max_channel_num = max_t(unsigned int, max_channel_num,
 340                                priv->curve_data->entries);
 341
 342        list = kzalloc(sizeof(*list), GFP_KERNEL);
 343        if (!list) {
 344                ret = -ENOMEM;
 345                goto free;
 346        }
 347        priv->chan_num = max_channel_num;
 348        priv->survey = kzalloc(sizeof(struct survey_info) * max_channel_num,
 349                               GFP_KERNEL);
 350        if (!priv->survey) {
 351                ret = -ENOMEM;
 352                goto free;
 353        }
 354
 355        list->max_entries = max_channel_num;
 356        list->channels = kzalloc(sizeof(struct p54_channel_entry) *
 357                                 max_channel_num, GFP_KERNEL);
 358        if (!list->channels) {
 359                ret = -ENOMEM;
 360                goto free;
 361        }
 362
 363        for (i = 0; i < max_channel_num; i++) {
 364                if (i < priv->iq_autocal_len) {
 365                        freq = le16_to_cpu(priv->iq_autocal[i].freq);
 366                        p54_update_channel_param(list, freq, CHAN_HAS_CAL);
 367                }
 368
 369                if (i < priv->output_limit->entries) {
 370                        struct p54_channel_entry *tmp;
 371
 372                        void *data = (void *) ((unsigned long) i *
 373                                priv->output_limit->entry_size +
 374                                priv->output_limit->offset +
 375                                priv->output_limit->data);
 376
 377                        freq = le16_to_cpup((__le16 *) data);
 378                        tmp = p54_update_channel_param(list, freq,
 379                                                       CHAN_HAS_LIMIT);
 380                        if (tmp) {
 381                                tmp->max_power = p54_get_maxpower(priv, data);
 382                        }
 383                }
 384
 385                if (i < priv->curve_data->entries) {
 386                        freq = le16_to_cpup((__le16 *) (i *
 387                                            priv->curve_data->entry_size +
 388                                            priv->curve_data->offset +
 389                                            priv->curve_data->data));
 390
 391                        p54_update_channel_param(list, freq, CHAN_HAS_CURVE);
 392                }
 393        }
 394
 395        /* sort the channel list by frequency */
 396        sort(list->channels, list->entries, sizeof(struct p54_channel_entry),
 397             p54_compare_channels, NULL);
 398
 399        k = 0;
 400        for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) {
 401                if (p54_generate_band(dev, list, &k, i) == 0)
 402                        j++;
 403        }
 404        if (j == 0) {
 405                /* no useable band available. */
 406                ret = -EINVAL;
 407        }
 408
 409free:
 410        if (list) {
 411                kfree(list->channels);
 412                kfree(list);
 413        }
 414        if (ret) {
 415                kfree(priv->survey);
 416                priv->survey = NULL;
 417        }
 418
 419        return ret;
 420}
 421
 422static int p54_convert_rev0(struct ieee80211_hw *dev,
 423                            struct pda_pa_curve_data *curve_data)
 424{
 425        struct p54_common *priv = dev->priv;
 426        struct p54_pa_curve_data_sample *dst;
 427        struct pda_pa_curve_data_sample_rev0 *src;
 428        size_t cd_len = sizeof(*curve_data) +
 429                (curve_data->points_per_channel*sizeof(*dst) + 2) *
 430                 curve_data->channels;
 431        unsigned int i, j;
 432        void *source, *target;
 433
 434        priv->curve_data = kmalloc(sizeof(*priv->curve_data) + cd_len,
 435                                   GFP_KERNEL);
 436        if (!priv->curve_data)
 437                return -ENOMEM;
 438
 439        priv->curve_data->entries = curve_data->channels;
 440        priv->curve_data->entry_size = sizeof(__le16) +
 441                sizeof(*dst) * curve_data->points_per_channel;
 442        priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
 443        priv->curve_data->len = cd_len;
 444        memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
 445        source = curve_data->data;
 446        target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
 447        for (i = 0; i < curve_data->channels; i++) {
 448                __le16 *freq = source;
 449                source += sizeof(__le16);
 450                *((__le16 *)target) = *freq;
 451                target += sizeof(__le16);
 452                for (j = 0; j < curve_data->points_per_channel; j++) {
 453                        dst = target;
 454                        src = source;
 455
 456                        dst->rf_power = src->rf_power;
 457                        dst->pa_detector = src->pa_detector;
 458                        dst->data_64qam = src->pcv;
 459                        /* "invent" the points for the other modulations */
 460#define SUB(x, y) (u8)(((x) - (y)) > (x) ? 0 : (x) - (y))
 461                        dst->data_16qam = SUB(src->pcv, 12);
 462                        dst->data_qpsk = SUB(dst->data_16qam, 12);
 463                        dst->data_bpsk = SUB(dst->data_qpsk, 12);
 464                        dst->data_barker = SUB(dst->data_bpsk, 14);
 465#undef SUB
 466                        target += sizeof(*dst);
 467                        source += sizeof(*src);
 468                }
 469        }
 470
 471        return 0;
 472}
 473
 474static int p54_convert_rev1(struct ieee80211_hw *dev,
 475                            struct pda_pa_curve_data *curve_data)
 476{
 477        struct p54_common *priv = dev->priv;
 478        struct p54_pa_curve_data_sample *dst;
 479        struct pda_pa_curve_data_sample_rev1 *src;
 480        size_t cd_len = sizeof(*curve_data) +
 481                (curve_data->points_per_channel*sizeof(*dst) + 2) *
 482                 curve_data->channels;
 483        unsigned int i, j;
 484        void *source, *target;
 485
 486        priv->curve_data = kzalloc(cd_len + sizeof(*priv->curve_data),
 487                                   GFP_KERNEL);
 488        if (!priv->curve_data)
 489                return -ENOMEM;
 490
 491        priv->curve_data->entries = curve_data->channels;
 492        priv->curve_data->entry_size = sizeof(__le16) +
 493                sizeof(*dst) * curve_data->points_per_channel;
 494        priv->curve_data->offset = offsetof(struct pda_pa_curve_data, data);
 495        priv->curve_data->len = cd_len;
 496        memcpy(priv->curve_data->data, curve_data, sizeof(*curve_data));
 497        source = curve_data->data;
 498        target = ((struct pda_pa_curve_data *) priv->curve_data->data)->data;
 499        for (i = 0; i < curve_data->channels; i++) {
 500                __le16 *freq = source;
 501                source += sizeof(__le16);
 502                *((__le16 *)target) = *freq;
 503                target += sizeof(__le16);
 504                for (j = 0; j < curve_data->points_per_channel; j++) {
 505                        memcpy(target, source, sizeof(*src));
 506
 507                        target += sizeof(*dst);
 508                        source += sizeof(*src);
 509                }
 510                source++;
 511        }
 512
 513        return 0;
 514}
 515
 516static const char *p54_rf_chips[] = { "INVALID-0", "Duette3", "Duette2",
 517        "Frisbee", "Xbow", "Longbow", "INVALID-6", "INVALID-7" };
 518
 519static int p54_parse_rssical(struct ieee80211_hw *dev,
 520                             u8 *data, int len, u16 type)
 521{
 522        struct p54_common *priv = dev->priv;
 523        struct p54_rssi_db_entry *entry;
 524        size_t db_len, entries;
 525        int offset = 0, i;
 526
 527        if (type != PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) {
 528                entries = (type == PDR_RSSI_LINEAR_APPROXIMATION) ? 1 : 2;
 529                if (len != sizeof(struct pda_rssi_cal_entry) * entries) {
 530                        wiphy_err(dev->wiphy, "rssical size mismatch.\n");
 531                        goto err_data;
 532                }
 533        } else {
 534                /*
 535                 * Some devices (Dell 1450 USB, Xbow 5GHz card, etc...)
 536                 * have an empty two byte header.
 537                 */
 538                if (*((__le16 *)&data[offset]) == cpu_to_le16(0))
 539                        offset += 2;
 540
 541                entries = (len - offset) /
 542                        sizeof(struct pda_rssi_cal_ext_entry);
 543
 544                if (len < offset ||
 545                    (len - offset) % sizeof(struct pda_rssi_cal_ext_entry) ||
 546                    entries == 0) {
 547                        wiphy_err(dev->wiphy, "invalid rssi database.\n");
 548                        goto err_data;
 549                }
 550        }
 551
 552        db_len = sizeof(*entry) * entries;
 553        priv->rssi_db = kzalloc(db_len + sizeof(*priv->rssi_db), GFP_KERNEL);
 554        if (!priv->rssi_db)
 555                return -ENOMEM;
 556
 557        priv->rssi_db->offset = 0;
 558        priv->rssi_db->entries = entries;
 559        priv->rssi_db->entry_size = sizeof(*entry);
 560        priv->rssi_db->len = db_len;
 561
 562        entry = (void *)((unsigned long)priv->rssi_db->data + priv->rssi_db->offset);
 563        if (type == PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED) {
 564                struct pda_rssi_cal_ext_entry *cal = (void *) &data[offset];
 565
 566                for (i = 0; i < entries; i++) {
 567                        entry[i].freq = le16_to_cpu(cal[i].freq);
 568                        entry[i].mul = (s16) le16_to_cpu(cal[i].mul);
 569                        entry[i].add = (s16) le16_to_cpu(cal[i].add);
 570                }
 571        } else {
 572                struct pda_rssi_cal_entry *cal = (void *) &data[offset];
 573
 574                for (i = 0; i < entries; i++) {
 575                        u16 freq = 0;
 576                        switch (i) {
 577                        case IEEE80211_BAND_2GHZ:
 578                                freq = 2437;
 579                                break;
 580                        case IEEE80211_BAND_5GHZ:
 581                                freq = 5240;
 582                                break;
 583                        }
 584
 585                        entry[i].freq = freq;
 586                        entry[i].mul = (s16) le16_to_cpu(cal[i].mul);
 587                        entry[i].add = (s16) le16_to_cpu(cal[i].add);
 588                }
 589        }
 590
 591        /* sort the list by channel frequency */
 592        sort(entry, entries, sizeof(*entry), p54_compare_rssichan, NULL);
 593        return 0;
 594
 595err_data:
 596        wiphy_err(dev->wiphy,
 597                  "rssi calibration data packing type:(%x) len:%d.\n",
 598                  type, len);
 599
 600        print_hex_dump_bytes("rssical:", DUMP_PREFIX_NONE, data, len);
 601
 602        wiphy_err(dev->wiphy, "please report this issue.\n");
 603        return -EINVAL;
 604}
 605
 606struct p54_rssi_db_entry *p54_rssi_find(struct p54_common *priv, const u16 freq)
 607{
 608        struct p54_rssi_db_entry *entry;
 609        int i, found = -1;
 610
 611        if (!priv->rssi_db)
 612                return &p54_rssi_default;
 613
 614        entry = (void *)(priv->rssi_db->data + priv->rssi_db->offset);
 615        for (i = 0; i < priv->rssi_db->entries; i++) {
 616                if (!same_band(freq, entry[i].freq))
 617                        continue;
 618
 619                if (found == -1) {
 620                        found = i;
 621                        continue;
 622                }
 623
 624                /* nearest match */
 625                if (abs(freq - entry[i].freq) <
 626                    abs(freq - entry[found].freq)) {
 627                        found = i;
 628                        continue;
 629                } else {
 630                        break;
 631                }
 632        }
 633
 634        return found < 0 ? &p54_rssi_default : &entry[found];
 635}
 636
 637static void p54_parse_default_country(struct ieee80211_hw *dev,
 638                                      void *data, int len)
 639{
 640        struct pda_country *country;
 641
 642        if (len != sizeof(*country)) {
 643                wiphy_err(dev->wiphy,
 644                          "found possible invalid default country eeprom entry. (entry size: %d)\n",
 645                          len);
 646
 647                print_hex_dump_bytes("country:", DUMP_PREFIX_NONE,
 648                                     data, len);
 649
 650                wiphy_err(dev->wiphy, "please report this issue.\n");
 651                return;
 652        }
 653
 654        country = (struct pda_country *) data;
 655        if (country->flags == PDR_COUNTRY_CERT_CODE_PSEUDO)
 656                regulatory_hint(dev->wiphy, country->alpha2);
 657        else {
 658                /* TODO:
 659                 * write a shared/common function that converts
 660                 * "Regulatory domain codes" (802.11-2007 14.8.2.2)
 661                 * into ISO/IEC 3166-1 alpha2 for regulatory_hint.
 662                 */
 663        }
 664}
 665
 666static int p54_convert_output_limits(struct ieee80211_hw *dev,
 667                                     u8 *data, size_t len)
 668{
 669        struct p54_common *priv = dev->priv;
 670
 671        if (len < 2)
 672                return -EINVAL;
 673
 674        if (data[0] != 0) {
 675                wiphy_err(dev->wiphy, "unknown output power db revision:%x\n",
 676                          data[0]);
 677                return -EINVAL;
 678        }
 679
 680        if (2 + data[1] * sizeof(struct pda_channel_output_limit) > len)
 681                return -EINVAL;
 682
 683        priv->output_limit = kmalloc(data[1] *
 684                sizeof(struct pda_channel_output_limit) +
 685                sizeof(*priv->output_limit), GFP_KERNEL);
 686
 687        if (!priv->output_limit)
 688                return -ENOMEM;
 689
 690        priv->output_limit->offset = 0;
 691        priv->output_limit->entries = data[1];
 692        priv->output_limit->entry_size =
 693                sizeof(struct pda_channel_output_limit);
 694        priv->output_limit->len = priv->output_limit->entry_size *
 695                                  priv->output_limit->entries +
 696                                  priv->output_limit->offset;
 697
 698        memcpy(priv->output_limit->data, &data[2],
 699               data[1] * sizeof(struct pda_channel_output_limit));
 700
 701        return 0;
 702}
 703
 704static struct p54_cal_database *p54_convert_db(struct pda_custom_wrapper *src,
 705                                               size_t total_len)
 706{
 707        struct p54_cal_database *dst;
 708        size_t payload_len, entries, entry_size, offset;
 709
 710        payload_len = le16_to_cpu(src->len);
 711        entries = le16_to_cpu(src->entries);
 712        entry_size = le16_to_cpu(src->entry_size);
 713        offset = le16_to_cpu(src->offset);
 714        if (((entries * entry_size + offset) != payload_len) ||
 715             (payload_len + sizeof(*src) != total_len))
 716                return NULL;
 717
 718        dst = kmalloc(sizeof(*dst) + payload_len, GFP_KERNEL);
 719        if (!dst)
 720                return NULL;
 721
 722        dst->entries = entries;
 723        dst->entry_size = entry_size;
 724        dst->offset = offset;
 725        dst->len = payload_len;
 726
 727        memcpy(dst->data, src->data, payload_len);
 728        return dst;
 729}
 730
 731int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 732{
 733        struct p54_common *priv = dev->priv;
 734        struct eeprom_pda_wrap *wrap;
 735        struct pda_entry *entry;
 736        unsigned int data_len, entry_len;
 737        void *tmp;
 738        int err;
 739        u8 *end = (u8 *)eeprom + len;
 740        u16 synth = 0;
 741        u16 crc16 = ~0;
 742
 743        wrap = (struct eeprom_pda_wrap *) eeprom;
 744        entry = (void *)wrap->data + le16_to_cpu(wrap->len);
 745
 746        /* verify that at least the entry length/code fits */
 747        while ((u8 *)entry <= end - sizeof(*entry)) {
 748                entry_len = le16_to_cpu(entry->len);
 749                data_len = ((entry_len - 1) << 1);
 750
 751                /* abort if entry exceeds whole structure */
 752                if ((u8 *)entry + sizeof(*entry) + data_len > end)
 753                        break;
 754
 755                switch (le16_to_cpu(entry->code)) {
 756                case PDR_MAC_ADDRESS:
 757                        if (data_len != ETH_ALEN)
 758                                break;
 759                        SET_IEEE80211_PERM_ADDR(dev, entry->data);
 760                        break;
 761                case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS:
 762                        if (priv->output_limit)
 763                                break;
 764                        err = p54_convert_output_limits(dev, entry->data,
 765                                                        data_len);
 766                        if (err)
 767                                goto err;
 768                        break;
 769                case PDR_PRISM_PA_CAL_CURVE_DATA: {
 770                        struct pda_pa_curve_data *curve_data =
 771                                (struct pda_pa_curve_data *)entry->data;
 772                        if (data_len < sizeof(*curve_data)) {
 773                                err = -EINVAL;
 774                                goto err;
 775                        }
 776
 777                        switch (curve_data->cal_method_rev) {
 778                        case 0:
 779                                err = p54_convert_rev0(dev, curve_data);
 780                                break;
 781                        case 1:
 782                                err = p54_convert_rev1(dev, curve_data);
 783                                break;
 784                        default:
 785                                wiphy_err(dev->wiphy,
 786                                          "unknown curve data revision %d\n",
 787                                          curve_data->cal_method_rev);
 788                                err = -ENODEV;
 789                                break;
 790                        }
 791                        if (err)
 792                                goto err;
 793                        }
 794                        break;
 795                case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
 796                        priv->iq_autocal = kmemdup(entry->data, data_len,
 797                                                   GFP_KERNEL);
 798                        if (!priv->iq_autocal) {
 799                                err = -ENOMEM;
 800                                goto err;
 801                        }
 802
 803                        priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
 804                        break;
 805                case PDR_DEFAULT_COUNTRY:
 806                        p54_parse_default_country(dev, entry->data, data_len);
 807                        break;
 808                case PDR_INTERFACE_LIST:
 809                        tmp = entry->data;
 810                        while ((u8 *)tmp < entry->data + data_len) {
 811                                struct exp_if *exp_if = tmp;
 812                                if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000))
 813                                        synth = le16_to_cpu(exp_if->variant);
 814                                tmp += sizeof(*exp_if);
 815                        }
 816                        break;
 817                case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
 818                        if (data_len < 2)
 819                                break;
 820                        priv->version = *(u8 *)(entry->data + 1);
 821                        break;
 822                case PDR_RSSI_LINEAR_APPROXIMATION:
 823                case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
 824                case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
 825                        err = p54_parse_rssical(dev, entry->data, data_len,
 826                                                le16_to_cpu(entry->code));
 827                        if (err)
 828                                goto err;
 829                        break;
 830                case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: {
 831                        struct pda_custom_wrapper *pda = (void *) entry->data;
 832                        __le16 *src;
 833                        u16 *dst;
 834                        int i;
 835
 836                        if (priv->rssi_db || data_len < sizeof(*pda))
 837                                break;
 838
 839                        priv->rssi_db = p54_convert_db(pda, data_len);
 840                        if (!priv->rssi_db)
 841                                break;
 842
 843                        src = (void *) priv->rssi_db->data;
 844                        dst = (void *) priv->rssi_db->data;
 845
 846                        for (i = 0; i < priv->rssi_db->entries; i++)
 847                                *(dst++) = (s16) le16_to_cpu(*(src++));
 848
 849                        }
 850                        break;
 851                case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
 852                        struct pda_custom_wrapper *pda = (void *) entry->data;
 853                        if (priv->output_limit || data_len < sizeof(*pda))
 854                                break;
 855                        priv->output_limit = p54_convert_db(pda, data_len);
 856                        }
 857                        break;
 858                case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: {
 859                        struct pda_custom_wrapper *pda = (void *) entry->data;
 860                        if (priv->curve_data || data_len < sizeof(*pda))
 861                                break;
 862                        priv->curve_data = p54_convert_db(pda, data_len);
 863                        }
 864                        break;
 865                case PDR_END:
 866                        crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry));
 867                        if (crc16 != le16_to_cpup((__le16 *)entry->data)) {
 868                                wiphy_err(dev->wiphy, "eeprom failed checksum "
 869                                         "test!\n");
 870                                err = -ENOMSG;
 871                                goto err;
 872                        } else {
 873                                goto good_eeprom;
 874                        }
 875                        break;
 876                default:
 877                        break;
 878                }
 879
 880                crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2);
 881                entry = (void *)entry + (entry_len + 1) * 2;
 882        }
 883
 884        wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n");
 885        err = -ENODATA;
 886        goto err;
 887
 888good_eeprom:
 889        if (!synth || !priv->iq_autocal || !priv->output_limit ||
 890            !priv->curve_data) {
 891                wiphy_err(dev->wiphy,
 892                          "not all required entries found in eeprom!\n");
 893                err = -EINVAL;
 894                goto err;
 895        }
 896
 897        priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
 898
 899        err = p54_generate_channel_lists(dev);
 900        if (err)
 901                goto err;
 902
 903        if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW)
 904                p54_init_xbow_synth(priv);
 905        if (!(synth & PDR_SYNTH_24_GHZ_DISABLED))
 906                dev->wiphy->bands[IEEE80211_BAND_2GHZ] =
 907                        priv->band_table[IEEE80211_BAND_2GHZ];
 908        if (!(synth & PDR_SYNTH_5_GHZ_DISABLED))
 909                dev->wiphy->bands[IEEE80211_BAND_5GHZ] =
 910                        priv->band_table[IEEE80211_BAND_5GHZ];
 911        if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED)
 912                priv->rx_diversity_mask = 3;
 913        if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED)
 914                priv->tx_diversity_mask = 3;
 915
 916        if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
 917                u8 perm_addr[ETH_ALEN];
 918
 919                wiphy_warn(dev->wiphy,
 920                           "Invalid hwaddr! Using randomly generated MAC addr\n");
 921                eth_random_addr(perm_addr);
 922                SET_IEEE80211_PERM_ADDR(dev, perm_addr);
 923        }
 924
 925        priv->cur_rssi = &p54_rssi_default;
 926
 927        wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n",
 928                   dev->wiphy->perm_addr, priv->version,
 929                   p54_rf_chips[priv->rxhw]);
 930
 931        return 0;
 932
 933err:
 934        kfree(priv->iq_autocal);
 935        kfree(priv->output_limit);
 936        kfree(priv->curve_data);
 937        kfree(priv->rssi_db);
 938        kfree(priv->survey);
 939        priv->iq_autocal = NULL;
 940        priv->output_limit = NULL;
 941        priv->curve_data = NULL;
 942        priv->rssi_db = NULL;
 943        priv->survey = NULL;
 944
 945        wiphy_err(dev->wiphy, "eeprom parse failed!\n");
 946        return err;
 947}
 948EXPORT_SYMBOL_GPL(p54_parse_eeprom);
 949
 950int p54_read_eeprom(struct ieee80211_hw *dev)
 951{
 952        struct p54_common *priv = dev->priv;
 953        size_t eeprom_size = 0x2020, offset = 0, blocksize, maxblocksize;
 954        int ret = -ENOMEM;
 955        void *eeprom;
 956
 957        maxblocksize = EEPROM_READBACK_LEN;
 958        if (priv->fw_var >= 0x509)
 959                maxblocksize -= 0xc;
 960        else
 961                maxblocksize -= 0x4;
 962
 963        eeprom = kzalloc(eeprom_size, GFP_KERNEL);
 964        if (unlikely(!eeprom))
 965                goto free;
 966
 967        while (eeprom_size) {
 968                blocksize = min(eeprom_size, maxblocksize);
 969                ret = p54_download_eeprom(priv, eeprom + offset,
 970                                          offset, blocksize);
 971                if (unlikely(ret))
 972                        goto free;
 973
 974                offset += blocksize;
 975                eeprom_size -= blocksize;
 976        }
 977
 978        ret = p54_parse_eeprom(dev, eeprom, offset);
 979free:
 980        kfree(eeprom);
 981        return ret;
 982}
 983EXPORT_SYMBOL_GPL(p54_read_eeprom);
 984