linux/drivers/net/wireless/ti/wl1251/cmd.c
<<
>>
Prefs
   1#include "cmd.h"
   2
   3#include <linux/module.h>
   4#include <linux/slab.h>
   5#include <linux/crc7.h>
   6
   7#include "wl1251.h"
   8#include "reg.h"
   9#include "io.h"
  10#include "ps.h"
  11#include "acx.h"
  12
  13/**
  14 * send command to firmware
  15 *
  16 * @wl: wl struct
  17 * @id: command id
  18 * @buf: buffer containing the command, must work with dma
  19 * @len: length of the buffer
  20 */
  21int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
  22{
  23        struct wl1251_cmd_header *cmd;
  24        unsigned long timeout;
  25        u32 intr;
  26        int ret = 0;
  27
  28        cmd = buf;
  29        cmd->id = id;
  30        cmd->status = 0;
  31
  32        WARN_ON(len % 4 != 0);
  33
  34        wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
  35
  36        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
  37
  38        timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
  39
  40        intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  41        while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
  42                if (time_after(jiffies, timeout)) {
  43                        wl1251_error("command complete timeout");
  44                        ret = -ETIMEDOUT;
  45                        goto out;
  46                }
  47
  48                msleep(1);
  49
  50                intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  51        }
  52
  53        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
  54                           WL1251_ACX_INTR_CMD_COMPLETE);
  55
  56out:
  57        return ret;
  58}
  59
  60/**
  61 * send test command to firmware
  62 *
  63 * @wl: wl struct
  64 * @buf: buffer containing the command, with all headers, must work with dma
  65 * @len: length of the buffer
  66 * @answer: is answer needed
  67 */
  68int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
  69{
  70        int ret;
  71
  72        wl1251_debug(DEBUG_CMD, "cmd test");
  73
  74        ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
  75
  76        if (ret < 0) {
  77                wl1251_warning("TEST command failed");
  78                return ret;
  79        }
  80
  81        if (answer) {
  82                struct wl1251_command *cmd_answer;
  83
  84                /*
  85                 * The test command got in, we can read the answer.
  86                 * The answer would be a wl1251_command, where the
  87                 * parameter array contains the actual answer.
  88                 */
  89                wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
  90
  91                cmd_answer = buf;
  92
  93                if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
  94                        wl1251_error("TEST command answer error: %d",
  95                                     cmd_answer->header.status);
  96        }
  97
  98        return 0;
  99}
 100
 101/**
 102 * read acx from firmware
 103 *
 104 * @wl: wl struct
 105 * @id: acx id
 106 * @buf: buffer for the response, including all headers, must work with dma
 107 * @len: length of buf
 108 */
 109int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
 110{
 111        struct acx_header *acx = buf;
 112        int ret;
 113
 114        wl1251_debug(DEBUG_CMD, "cmd interrogate");
 115
 116        acx->id = id;
 117
 118        /* payload length, does not include any headers */
 119        acx->len = len - sizeof(*acx);
 120
 121        ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
 122        if (ret < 0) {
 123                wl1251_error("INTERROGATE command failed");
 124                goto out;
 125        }
 126
 127        /* the interrogate command got in, we can read the answer */
 128        wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
 129
 130        acx = buf;
 131        if (acx->cmd.status != CMD_STATUS_SUCCESS)
 132                wl1251_error("INTERROGATE command error: %d",
 133                             acx->cmd.status);
 134
 135out:
 136        return ret;
 137}
 138
 139/**
 140 * write acx value to firmware
 141 *
 142 * @wl: wl struct
 143 * @id: acx id
 144 * @buf: buffer containing acx, including all headers, must work with dma
 145 * @len: length of buf
 146 */
 147int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
 148{
 149        struct acx_header *acx = buf;
 150        int ret;
 151
 152        wl1251_debug(DEBUG_CMD, "cmd configure");
 153
 154        acx->id = id;
 155
 156        /* payload length, does not include any headers */
 157        acx->len = len - sizeof(*acx);
 158
 159        ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
 160        if (ret < 0) {
 161                wl1251_warning("CONFIGURE command NOK");
 162                return ret;
 163        }
 164
 165        return 0;
 166}
 167
 168int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
 169                   void *bitmap, u16 bitmap_len, u8 bitmap_control)
 170{
 171        struct wl1251_cmd_vbm_update *vbm;
 172        int ret;
 173
 174        wl1251_debug(DEBUG_CMD, "cmd vbm");
 175
 176        vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
 177        if (!vbm) {
 178                ret = -ENOMEM;
 179                goto out;
 180        }
 181
 182        /* Count and period will be filled by the target */
 183        vbm->tim.bitmap_ctrl = bitmap_control;
 184        if (bitmap_len > PARTIAL_VBM_MAX) {
 185                wl1251_warning("cmd vbm len is %d B, truncating to %d",
 186                               bitmap_len, PARTIAL_VBM_MAX);
 187                bitmap_len = PARTIAL_VBM_MAX;
 188        }
 189        memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
 190        vbm->tim.identity = identity;
 191        vbm->tim.length = bitmap_len + 3;
 192
 193        vbm->len = cpu_to_le16(bitmap_len + 5);
 194
 195        ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
 196        if (ret < 0) {
 197                wl1251_error("VBM command failed");
 198                goto out;
 199        }
 200
 201out:
 202        kfree(vbm);
 203        return ret;
 204}
 205
 206int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable)
 207{
 208        struct cmd_enabledisable_path *cmd;
 209        int ret;
 210        u16 cmd_rx, cmd_tx;
 211
 212        wl1251_debug(DEBUG_CMD, "cmd data path");
 213
 214        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 215        if (!cmd) {
 216                ret = -ENOMEM;
 217                goto out;
 218        }
 219
 220        cmd->channel = channel;
 221
 222        if (enable) {
 223                cmd_rx = CMD_ENABLE_RX;
 224                cmd_tx = CMD_ENABLE_TX;
 225        } else {
 226                cmd_rx = CMD_DISABLE_RX;
 227                cmd_tx = CMD_DISABLE_TX;
 228        }
 229
 230        ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
 231        if (ret < 0) {
 232                wl1251_error("rx %s cmd for channel %d failed",
 233                             enable ? "start" : "stop", channel);
 234                goto out;
 235        }
 236
 237        wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
 238                     enable ? "start" : "stop", channel);
 239
 240        ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
 241        if (ret < 0) {
 242                wl1251_error("tx %s cmd for channel %d failed",
 243                             enable ? "start" : "stop", channel);
 244                goto out;
 245        }
 246
 247        wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
 248                     enable ? "start" : "stop", channel);
 249
 250out:
 251        kfree(cmd);
 252        return ret;
 253}
 254
 255int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 256                    u16 beacon_interval, u8 dtim_interval)
 257{
 258        struct cmd_join *join;
 259        int ret, i;
 260        u8 *bssid;
 261
 262        join = kzalloc(sizeof(*join), GFP_KERNEL);
 263        if (!join) {
 264                ret = -ENOMEM;
 265                goto out;
 266        }
 267
 268        wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
 269                     bss_type == BSS_TYPE_IBSS ? " ibss" : "",
 270                     channel, beacon_interval, dtim_interval);
 271
 272        /* Reverse order BSSID */
 273        bssid = (u8 *) &join->bssid_lsb;
 274        for (i = 0; i < ETH_ALEN; i++)
 275                bssid[i] = wl->bssid[ETH_ALEN - i - 1];
 276
 277        join->rx_config_options = wl->rx_config;
 278        join->rx_filter_options = wl->rx_filter;
 279
 280        join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
 281                RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
 282
 283        join->beacon_interval = beacon_interval;
 284        join->dtim_interval = dtim_interval;
 285        join->bss_type = bss_type;
 286        join->channel = channel;
 287        join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
 288
 289        ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
 290        if (ret < 0) {
 291                wl1251_error("failed to initiate cmd join");
 292                goto out;
 293        }
 294
 295out:
 296        kfree(join);
 297        return ret;
 298}
 299
 300int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
 301{
 302        struct wl1251_cmd_ps_params *ps_params = NULL;
 303        int ret = 0;
 304
 305        wl1251_debug(DEBUG_CMD, "cmd set ps mode");
 306
 307        ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
 308        if (!ps_params) {
 309                ret = -ENOMEM;
 310                goto out;
 311        }
 312
 313        ps_params->ps_mode = ps_mode;
 314        ps_params->send_null_data = 1;
 315        ps_params->retries = 5;
 316        ps_params->hang_over_period = 128;
 317        ps_params->null_data_rate = 1; /* 1 Mbps */
 318
 319        ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
 320                              sizeof(*ps_params));
 321        if (ret < 0) {
 322                wl1251_error("cmd set_ps_mode failed");
 323                goto out;
 324        }
 325
 326out:
 327        kfree(ps_params);
 328        return ret;
 329}
 330
 331int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
 332                           size_t len)
 333{
 334        struct cmd_read_write_memory *cmd;
 335        int ret = 0;
 336
 337        wl1251_debug(DEBUG_CMD, "cmd read memory");
 338
 339        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 340        if (!cmd) {
 341                ret = -ENOMEM;
 342                goto out;
 343        }
 344
 345        WARN_ON(len > MAX_READ_SIZE);
 346        len = min_t(size_t, len, MAX_READ_SIZE);
 347
 348        cmd->addr = addr;
 349        cmd->size = len;
 350
 351        ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
 352        if (ret < 0) {
 353                wl1251_error("read memory command failed: %d", ret);
 354                goto out;
 355        }
 356
 357        /* the read command got in, we can now read the answer */
 358        wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
 359
 360        if (cmd->header.status != CMD_STATUS_SUCCESS)
 361                wl1251_error("error in read command result: %d",
 362                             cmd->header.status);
 363
 364        memcpy(answer, cmd->value, len);
 365
 366out:
 367        kfree(cmd);
 368        return ret;
 369}
 370
 371int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
 372                            void *buf, size_t buf_len)
 373{
 374        struct wl1251_cmd_packet_template *cmd;
 375        size_t cmd_len;
 376        int ret = 0;
 377
 378        wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
 379
 380        WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
 381        buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
 382        cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
 383
 384        cmd = kzalloc(cmd_len, GFP_KERNEL);
 385        if (!cmd) {
 386                ret = -ENOMEM;
 387                goto out;
 388        }
 389
 390        cmd->size = cpu_to_le16(buf_len);
 391
 392        if (buf)
 393                memcpy(cmd->data, buf, buf_len);
 394
 395        ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
 396        if (ret < 0) {
 397                wl1251_warning("cmd set_template failed: %d", ret);
 398                goto out;
 399        }
 400
 401out:
 402        kfree(cmd);
 403        return ret;
 404}
 405
 406int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 407                    struct ieee80211_channel *channels[],
 408                    unsigned int n_channels, unsigned int n_probes)
 409{
 410        struct wl1251_cmd_scan *cmd;
 411        int i, ret = 0;
 412
 413        wl1251_debug(DEBUG_CMD, "cmd scan");
 414
 415        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 416        if (!cmd)
 417                return -ENOMEM;
 418
 419        cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
 420        cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
 421                                                    CFG_RX_MGMT_EN |
 422                                                    CFG_RX_BCN_EN);
 423        cmd->params.scan_options = 0;
 424        cmd->params.num_channels = n_channels;
 425        cmd->params.num_probe_requests = n_probes;
 426        cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
 427        cmd->params.tid_trigger = 0;
 428
 429        for (i = 0; i < n_channels; i++) {
 430                cmd->channels[i].min_duration =
 431                        cpu_to_le32(WL1251_SCAN_MIN_DURATION);
 432                cmd->channels[i].max_duration =
 433                        cpu_to_le32(WL1251_SCAN_MAX_DURATION);
 434                memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
 435                memset(&cmd->channels[i].bssid_msb, 0xff, 2);
 436                cmd->channels[i].early_termination = 0;
 437                cmd->channels[i].tx_power_att = 0;
 438                cmd->channels[i].channel = channels[i]->hw_value;
 439        }
 440
 441        cmd->params.ssid_len = ssid_len;
 442        if (ssid)
 443                memcpy(cmd->params.ssid, ssid, ssid_len);
 444
 445        ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 446        if (ret < 0) {
 447                wl1251_error("cmd scan failed: %d", ret);
 448                goto out;
 449        }
 450
 451        wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
 452
 453        if (cmd->header.status != CMD_STATUS_SUCCESS) {
 454                wl1251_error("cmd scan status wasn't success: %d",
 455                             cmd->header.status);
 456                ret = -EIO;
 457                goto out;
 458        }
 459
 460out:
 461        kfree(cmd);
 462        return ret;
 463}
 464
 465int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
 466{
 467        struct wl1251_cmd_trigger_scan_to *cmd;
 468        int ret;
 469
 470        wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
 471
 472        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 473        if (!cmd)
 474                return -ENOMEM;
 475
 476        cmd->timeout = timeout;
 477
 478        ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
 479        if (ret < 0) {
 480                wl1251_error("cmd trigger scan to failed: %d", ret);
 481                goto out;
 482        }
 483
 484out:
 485        kfree(cmd);
 486        return ret;
 487}
 488