linux/drivers/scsi/a100u2w.c
<<
>>
Prefs
   1/*
   2 * Initio A100 device driver for Linux.
   3 *
   4 * Copyright (c) 1994-1998 Initio Corporation
   5 * Copyright (c) 2003-2004 Christoph Hellwig
   6 * All rights reserved.
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License as published by
  10 * the Free Software Foundation; either version 2, or (at your option)
  11 * any later version.
  12 *
  13 * This program is distributed in the hope that it will be useful,
  14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 *
  18 * You should have received a copy of the GNU General Public License
  19 * along with this program; see the file COPYING.  If not, write to
  20 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  21 *
  22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
  26 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  32 * SUCH DAMAGE.
  33 */
  34
  35/*
  36 * Revision History:
  37 * 07/02/98 hl  - v.91n Initial drivers.
  38 * 09/14/98 hl - v1.01 Support new Kernel.
  39 * 09/22/98 hl - v1.01a Support reset.
  40 * 09/24/98 hl - v1.01b Fixed reset.
  41 * 10/05/98 hl - v1.02 split the source code and release.
  42 * 12/19/98 bv - v1.02a Use spinlocks for 2.1.95 and up
  43 * 01/31/99 bv - v1.02b Use mdelay instead of waitForPause
  44 * 08/08/99 bv - v1.02c Use waitForPause again.
  45 * 06/25/02 Doug Ledford <dledford@redhat.com> - v1.02d
  46 *          - Remove limit on number of controllers
  47 *          - Port to DMA mapping API
  48 *          - Clean up interrupt handler registration
  49 *          - Fix memory leaks
  50 *          - Fix allocation of scsi host structs and private data
  51 * 11/18/03 Christoph Hellwig <hch@lst.de>
  52 *          - Port to new probing API
  53 *          - Fix some more leaks in init failure cases
  54 * 9/28/04 Christoph Hellwig <hch@lst.de>
  55 *          - merge the two source files
  56 *          - remove internal queueing code
  57 * 14/06/07 Alan Cox <alan@lxorguk.ukuu.org.uk>
  58 *       - Grand cleanup and Linuxisation
  59 */
  60
  61#include <linux/module.h>
  62#include <linux/errno.h>
  63#include <linux/delay.h>
  64#include <linux/interrupt.h>
  65#include <linux/pci.h>
  66#include <linux/init.h>
  67#include <linux/blkdev.h>
  68#include <linux/spinlock.h>
  69#include <linux/kernel.h>
  70#include <linux/string.h>
  71#include <linux/ioport.h>
  72#include <linux/dma-mapping.h>
  73
  74#include <asm/io.h>
  75#include <asm/irq.h>
  76
  77#include <scsi/scsi.h>
  78#include <scsi/scsi_cmnd.h>
  79#include <scsi/scsi_device.h>
  80#include <scsi/scsi_host.h>
  81
  82#include "a100u2w.h"
  83
  84
  85static struct orc_scb *__orc_alloc_scb(struct orc_host * host);
  86static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb);
  87
  88static struct orc_nvram nvram, *nvramp = &nvram;
  89
  90static u8 default_nvram[64] =
  91{
  92/*----------header -------------*/
  93        0x01,                   /* 0x00: Sub System Vendor ID 0 */
  94        0x11,                   /* 0x01: Sub System Vendor ID 1 */
  95        0x60,                   /* 0x02: Sub System ID 0        */
  96        0x10,                   /* 0x03: Sub System ID 1        */
  97        0x00,                   /* 0x04: SubClass               */
  98        0x01,                   /* 0x05: Vendor ID 0            */
  99        0x11,                   /* 0x06: Vendor ID 1            */
 100        0x60,                   /* 0x07: Device ID 0            */
 101        0x10,                   /* 0x08: Device ID 1            */
 102        0x00,                   /* 0x09: Reserved               */
 103        0x00,                   /* 0x0A: Reserved               */
 104        0x01,                   /* 0x0B: Revision of Data Structure     */
 105                                /* -- Host Adapter Structure --- */
 106        0x01,                   /* 0x0C: Number Of SCSI Channel */
 107        0x01,                   /* 0x0D: BIOS Configuration 1   */
 108        0x00,                   /* 0x0E: BIOS Configuration 2   */
 109        0x00,                   /* 0x0F: BIOS Configuration 3   */
 110                                /* --- SCSI Channel 0 Configuration --- */
 111        0x07,                   /* 0x10: H/A ID                 */
 112        0x83,                   /* 0x11: Channel Configuration  */
 113        0x20,                   /* 0x12: MAX TAG per target     */
 114        0x0A,                   /* 0x13: SCSI Reset Recovering time     */
 115        0x00,                   /* 0x14: Channel Configuration4 */
 116        0x00,                   /* 0x15: Channel Configuration5 */
 117                                /* SCSI Channel 0 Target Configuration  */
 118                                /* 0x16-0x25                    */
 119        0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
 120        0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
 121                                /* --- SCSI Channel 1 Configuration --- */
 122        0x07,                   /* 0x26: H/A ID                 */
 123        0x83,                   /* 0x27: Channel Configuration  */
 124        0x20,                   /* 0x28: MAX TAG per target     */
 125        0x0A,                   /* 0x29: SCSI Reset Recovering time     */
 126        0x00,                   /* 0x2A: Channel Configuration4 */
 127        0x00,                   /* 0x2B: Channel Configuration5 */
 128                                /* SCSI Channel 1 Target Configuration  */
 129                                /* 0x2C-0x3B                    */
 130        0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
 131        0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8,
 132        0x00,                   /* 0x3C: Reserved               */
 133        0x00,                   /* 0x3D: Reserved               */
 134        0x00,                   /* 0x3E: Reserved               */
 135        0x00                    /* 0x3F: Checksum               */
 136};
 137
 138
 139static u8 wait_chip_ready(struct orc_host * host)
 140{
 141        int i;
 142
 143        for (i = 0; i < 10; i++) {      /* Wait 1 second for report timeout     */
 144                if (inb(host->base + ORC_HCTRL) & HOSTSTOP)     /* Wait HOSTSTOP set */
 145                        return 1;
 146                mdelay(100);
 147        }
 148        return 0;
 149}
 150
 151static u8 wait_firmware_ready(struct orc_host * host)
 152{
 153        int i;
 154
 155        for (i = 0; i < 10; i++) {      /* Wait 1 second for report timeout     */
 156                if (inb(host->base + ORC_HSTUS) & RREADY)               /* Wait READY set */
 157                        return 1;
 158                mdelay(100);    /* wait 100ms before try again  */
 159        }
 160        return 0;
 161}
 162
 163/***************************************************************************/
 164static u8 wait_scsi_reset_done(struct orc_host * host)
 165{
 166        int i;
 167
 168        for (i = 0; i < 10; i++) {      /* Wait 1 second for report timeout     */
 169                if (!(inb(host->base + ORC_HCTRL) & SCSIRST))   /* Wait SCSIRST done */
 170                        return 1;
 171                mdelay(100);    /* wait 100ms before try again  */
 172        }
 173        return 0;
 174}
 175
 176/***************************************************************************/
 177static u8 wait_HDO_off(struct orc_host * host)
 178{
 179        int i;
 180
 181        for (i = 0; i < 10; i++) {      /* Wait 1 second for report timeout     */
 182                if (!(inb(host->base + ORC_HCTRL) & HDO))               /* Wait HDO off */
 183                        return 1;
 184                mdelay(100);    /* wait 100ms before try again  */
 185        }
 186        return 0;
 187}
 188
 189/***************************************************************************/
 190static u8 wait_hdi_set(struct orc_host * host, u8 * data)
 191{
 192        int i;
 193
 194        for (i = 0; i < 10; i++) {      /* Wait 1 second for report timeout     */
 195                if ((*data = inb(host->base + ORC_HSTUS)) & HDI)
 196                        return 1;       /* Wait HDI set */
 197                mdelay(100);    /* wait 100ms before try again  */
 198        }
 199        return 0;
 200}
 201
 202/***************************************************************************/
 203static unsigned short orc_read_fwrev(struct orc_host * host)
 204{
 205        u16 version;
 206        u8 data;
 207
 208        outb(ORC_CMD_VERSION, host->base + ORC_HDATA);
 209        outb(HDO, host->base + ORC_HCTRL);
 210        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 211                return 0;
 212
 213        if (wait_hdi_set(host, &data) == 0)     /* Wait HDI set   */
 214                return 0;
 215        version = inb(host->base + ORC_HDATA);
 216        outb(data, host->base + ORC_HSTUS);     /* Clear HDI            */
 217
 218        if (wait_hdi_set(host, &data) == 0)     /* Wait HDI set   */
 219                return 0;
 220        version |= inb(host->base + ORC_HDATA) << 8;
 221        outb(data, host->base + ORC_HSTUS);     /* Clear HDI            */
 222
 223        return version;
 224}
 225
 226/***************************************************************************/
 227static u8 orc_nv_write(struct orc_host * host, unsigned char address, unsigned char value)
 228{
 229        outb(ORC_CMD_SET_NVM, host->base + ORC_HDATA);  /* Write command */
 230        outb(HDO, host->base + ORC_HCTRL);
 231        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 232                return 0;
 233
 234        outb(address, host->base + ORC_HDATA);  /* Write address */
 235        outb(HDO, host->base + ORC_HCTRL);
 236        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 237                return 0;
 238
 239        outb(value, host->base + ORC_HDATA);    /* Write value  */
 240        outb(HDO, host->base + ORC_HCTRL);
 241        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 242                return 0;
 243
 244        return 1;
 245}
 246
 247/***************************************************************************/
 248static u8 orc_nv_read(struct orc_host * host, u8 address, u8 *ptr)
 249{
 250        unsigned char data;
 251
 252        outb(ORC_CMD_GET_NVM, host->base + ORC_HDATA);  /* Write command */
 253        outb(HDO, host->base + ORC_HCTRL);
 254        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 255                return 0;
 256
 257        outb(address, host->base + ORC_HDATA);  /* Write address */
 258        outb(HDO, host->base + ORC_HCTRL);
 259        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 260                return 0;
 261
 262        if (wait_hdi_set(host, &data) == 0)     /* Wait HDI set   */
 263                return 0;
 264        *ptr = inb(host->base + ORC_HDATA);
 265        outb(data, host->base + ORC_HSTUS);     /* Clear HDI    */
 266
 267        return 1;
 268
 269}
 270
 271/**
 272 *      orc_exec_sb             -       Queue an SCB with the HA
 273 *      @host: host adapter the SCB belongs to
 274 *      @scb: SCB to queue for execution
 275 */
 276
 277static void orc_exec_scb(struct orc_host * host, struct orc_scb * scb)
 278{
 279        scb->status = ORCSCB_POST;
 280        outb(scb->scbidx, host->base + ORC_PQUEUE);
 281}
 282
 283
 284/**
 285 *      se2_rd_all      -       read SCSI parameters from EEPROM
 286 *      @host: Host whose EEPROM is being loaded
 287 *
 288 *      Read SCSI H/A configuration parameters from serial EEPROM
 289 */
 290
 291static int se2_rd_all(struct orc_host * host)
 292{
 293        int i;
 294        u8 *np, chksum = 0;
 295
 296        np = (u8 *) nvramp;
 297        for (i = 0; i < 64; i++, np++) {        /* <01> */
 298                if (orc_nv_read(host, (u8) i, np) == 0)
 299                        return -1;
 300        }
 301
 302        /*------ Is ckecksum ok ? ------*/
 303        np = (u8 *) nvramp;
 304        for (i = 0; i < 63; i++)
 305                chksum += *np++;
 306
 307        if (nvramp->CheckSum != (u8) chksum)
 308                return -1;
 309        return 1;
 310}
 311
 312/**
 313 *      se2_update_all          -       update the EEPROM
 314 *      @host: Host whose EEPROM is being updated
 315 *
 316 *      Update changed bytes in the EEPROM image.
 317 */
 318
 319static void se2_update_all(struct orc_host * host)
 320{                               /* setup default pattern  */
 321        int i;
 322        u8 *np, *np1, chksum = 0;
 323
 324        /* Calculate checksum first   */
 325        np = (u8 *) default_nvram;
 326        for (i = 0; i < 63; i++)
 327                chksum += *np++;
 328        *np = chksum;
 329
 330        np = (u8 *) default_nvram;
 331        np1 = (u8 *) nvramp;
 332        for (i = 0; i < 64; i++, np++, np1++) {
 333                if (*np != *np1)
 334                        orc_nv_write(host, (u8) i, *np);
 335        }
 336}
 337
 338/**
 339 *      read_eeprom             -       load EEPROM
 340 *      @host: Host EEPROM to read
 341 *
 342 *      Read the EEPROM for a given host. If it is invalid or fails
 343 *      the restore the defaults and use them.
 344 */
 345
 346static void read_eeprom(struct orc_host * host)
 347{
 348        if (se2_rd_all(host) != 1) {
 349                se2_update_all(host);   /* setup default pattern        */
 350                se2_rd_all(host);       /* load again                   */
 351        }
 352}
 353
 354
 355/**
 356 *      orc_load_firmware       -       initialise firmware
 357 *      @host: Host to set up
 358 *
 359 *      Load the firmware from the EEPROM into controller SRAM. This
 360 *      is basically a 4K block copy and then a 4K block read to check
 361 *      correctness. The rest is convulted by the indirect interfaces
 362 *      in the hardware
 363 */
 364
 365static u8 orc_load_firmware(struct orc_host * host)
 366{
 367        u32 data32;
 368        u16 bios_addr;
 369        u16 i;
 370        u8 *data32_ptr, data;
 371
 372
 373        /* Set up the EEPROM for access */
 374
 375        data = inb(host->base + ORC_GCFG);
 376        outb(data | EEPRG, host->base + ORC_GCFG);      /* Enable EEPROM programming */
 377        outb(0x00, host->base + ORC_EBIOSADR2);
 378        outw(0x0000, host->base + ORC_EBIOSADR0);
 379        if (inb(host->base + ORC_EBIOSDATA) != 0x55) {
 380                outb(data, host->base + ORC_GCFG);      /* Disable EEPROM programming */
 381                return 0;
 382        }
 383        outw(0x0001, host->base + ORC_EBIOSADR0);
 384        if (inb(host->base + ORC_EBIOSDATA) != 0xAA) {
 385                outb(data, host->base + ORC_GCFG);      /* Disable EEPROM programming */
 386                return 0;
 387        }
 388
 389        outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL);     /* Enable SRAM programming */
 390        data32_ptr = (u8 *) & data32;
 391        data32 = cpu_to_le32(0);                /* Initial FW address to 0 */
 392        outw(0x0010, host->base + ORC_EBIOSADR0);
 393        *data32_ptr = inb(host->base + ORC_EBIOSDATA);          /* Read from BIOS */
 394        outw(0x0011, host->base + ORC_EBIOSADR0);
 395        *(data32_ptr + 1) = inb(host->base + ORC_EBIOSDATA);    /* Read from BIOS */
 396        outw(0x0012, host->base + ORC_EBIOSADR0);
 397        *(data32_ptr + 2) = inb(host->base + ORC_EBIOSDATA);    /* Read from BIOS */
 398        outw(*(data32_ptr + 2), host->base + ORC_EBIOSADR2);
 399        outl(le32_to_cpu(data32), host->base + ORC_FWBASEADR);          /* Write FW address */
 400
 401        /* Copy the code from the BIOS to the SRAM */
 402
 403        udelay(500);    /* Required on Sun Ultra 5 ... 350 -> failures */
 404        bios_addr = (u16) le32_to_cpu(data32);  /* FW code locate at BIOS address + ? */
 405        for (i = 0, data32_ptr = (u8 *) & data32;       /* Download the code    */
 406             i < 0x1000;        /* Firmware code size = 4K      */
 407             i++, bios_addr++) {
 408                outw(bios_addr, host->base + ORC_EBIOSADR0);
 409                *data32_ptr++ = inb(host->base + ORC_EBIOSDATA);        /* Read from BIOS */
 410                if ((i % 4) == 3) {
 411                        outl(le32_to_cpu(data32), host->base + ORC_RISCRAM);    /* Write every 4 bytes */
 412                        data32_ptr = (u8 *) & data32;
 413                }
 414        }
 415
 416        /* Go back and check they match */
 417
 418        outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL);     /* Reset program count 0 */
 419        bios_addr -= 0x1000;    /* Reset the BIOS address */
 420        for (i = 0, data32_ptr = (u8 *) & data32;       /* Check the code       */
 421             i < 0x1000;        /* Firmware code size = 4K      */
 422             i++, bios_addr++) {
 423                outw(bios_addr, host->base + ORC_EBIOSADR0);
 424                *data32_ptr++ = inb(host->base + ORC_EBIOSDATA);        /* Read from BIOS */
 425                if ((i % 4) == 3) {
 426                        if (inl(host->base + ORC_RISCRAM) != le32_to_cpu(data32)) {
 427                                outb(PRGMRST, host->base + ORC_RISCCTL);        /* Reset program to 0 */
 428                                outb(data, host->base + ORC_GCFG);      /*Disable EEPROM programming */
 429                                return 0;
 430                        }
 431                        data32_ptr = (u8 *) & data32;
 432                }
 433        }
 434
 435        /* Success */
 436        outb(PRGMRST, host->base + ORC_RISCCTL);        /* Reset program to 0   */
 437        outb(data, host->base + ORC_GCFG);      /* Disable EEPROM programming */
 438        return 1;
 439}
 440
 441/***************************************************************************/
 442static void setup_SCBs(struct orc_host * host)
 443{
 444        struct orc_scb *scb;
 445        int i;
 446        struct orc_extended_scb *escb;
 447        dma_addr_t escb_phys;
 448
 449        /* Setup SCB base and SCB Size registers */
 450        outb(ORC_MAXQUEUE, host->base + ORC_SCBSIZE);   /* Total number of SCBs */
 451        /* SCB base address 0      */
 452        outl(host->scb_phys, host->base + ORC_SCBBASE0);
 453        /* SCB base address 1      */
 454        outl(host->scb_phys, host->base + ORC_SCBBASE1);
 455
 456        /* setup scatter list address with one buffer */
 457        scb = host->scb_virt;
 458        escb = host->escb_virt;
 459
 460        for (i = 0; i < ORC_MAXQUEUE; i++) {
 461                escb_phys = (host->escb_phys + (sizeof(struct orc_extended_scb) * i));
 462                scb->sg_addr = cpu_to_le32((u32) escb_phys);
 463                scb->sense_addr = cpu_to_le32((u32) escb_phys);
 464                scb->escb = escb;
 465                scb->scbidx = i;
 466                scb++;
 467                escb++;
 468        }
 469}
 470
 471/**
 472 *      init_alloc_map          -       initialise allocation map
 473 *      @host: host map to configure
 474 *
 475 *      Initialise the allocation maps for this device. If the device
 476 *      is not quiescent the caller must hold the allocation lock
 477 */
 478
 479static void init_alloc_map(struct orc_host * host)
 480{
 481        u8 i, j;
 482
 483        for (i = 0; i < MAX_CHANNELS; i++) {
 484                for (j = 0; j < 8; j++) {
 485                        host->allocation_map[i][j] = 0xffffffff;
 486                }
 487        }
 488}
 489
 490/**
 491 *      init_orchid             -       initialise the host adapter
 492 *      @host:host adapter to initialise
 493 *
 494 *      Initialise the controller and if necessary load the firmware.
 495 *
 496 *      Returns -1 if the initialisation fails.
 497 */
 498
 499static int init_orchid(struct orc_host * host)
 500{
 501        u8 *ptr;
 502        u16 revision;
 503        u8 i;
 504
 505        init_alloc_map(host);
 506        outb(0xFF, host->base + ORC_GIMSK);     /* Disable all interrupts */
 507
 508        if (inb(host->base + ORC_HSTUS) & RREADY) {     /* Orchid is ready */
 509                revision = orc_read_fwrev(host);
 510                if (revision == 0xFFFF) {
 511                        outb(DEVRST, host->base + ORC_HCTRL);   /* Reset Host Adapter   */
 512                        if (wait_chip_ready(host) == 0)
 513                                return -1;
 514                        orc_load_firmware(host);        /* Download FW                  */
 515                        setup_SCBs(host);       /* Setup SCB base and SCB Size registers */
 516                        outb(0x00, host->base + ORC_HCTRL);     /* clear HOSTSTOP       */
 517                        if (wait_firmware_ready(host) == 0)
 518                                return -1;
 519                        /* Wait for firmware ready     */
 520                } else {
 521                        setup_SCBs(host);       /* Setup SCB base and SCB Size registers */
 522                }
 523        } else {                /* Orchid is not Ready          */
 524                outb(DEVRST, host->base + ORC_HCTRL);   /* Reset Host Adapter   */
 525                if (wait_chip_ready(host) == 0)
 526                        return -1;
 527                orc_load_firmware(host);        /* Download FW                  */
 528                setup_SCBs(host);       /* Setup SCB base and SCB Size registers */
 529                outb(HDO, host->base + ORC_HCTRL);      /* Do Hardware Reset &  */
 530
 531                /*     clear HOSTSTOP  */
 532                if (wait_firmware_ready(host) == 0)             /* Wait for firmware ready      */
 533                        return -1;
 534        }
 535
 536        /* Load an EEProm copy into RAM */
 537        /* Assumes single threaded at this point */
 538        read_eeprom(host);
 539
 540        if (nvramp->revision != 1)
 541                return -1;
 542
 543        host->scsi_id = nvramp->scsi_id;
 544        host->BIOScfg = nvramp->BIOSConfig1;
 545        host->max_targets = MAX_TARGETS;
 546        ptr = (u8 *) & (nvramp->Target00Config);
 547        for (i = 0; i < 16; ptr++, i++) {
 548                host->target_flag[i] = *ptr;
 549                host->max_tags[i] = ORC_MAXTAGS;
 550        }
 551
 552        if (nvramp->SCSI0Config & NCC_BUSRESET)
 553                host->flags |= HCF_SCSI_RESET;
 554        outb(0xFB, host->base + ORC_GIMSK);     /* enable RP FIFO interrupt     */
 555        return 0;
 556}
 557
 558/**
 559 *      orc_reset_scsi_bus              -       perform bus reset
 560 *      @host: host being reset
 561 *
 562 *      Perform a full bus reset on the adapter.
 563 */
 564
 565static int orc_reset_scsi_bus(struct orc_host * host)
 566{                               /* I need Host Control Block Information */
 567        unsigned long flags;
 568
 569        spin_lock_irqsave(&host->allocation_lock, flags);
 570
 571        init_alloc_map(host);
 572        /* reset scsi bus */
 573        outb(SCSIRST, host->base + ORC_HCTRL);
 574        /* FIXME: We can spend up to a second with the lock held and
 575           interrupts off here */
 576        if (wait_scsi_reset_done(host) == 0) {
 577                spin_unlock_irqrestore(&host->allocation_lock, flags);
 578                return FAILED;
 579        } else {
 580                spin_unlock_irqrestore(&host->allocation_lock, flags);
 581                return SUCCESS;
 582        }
 583}
 584
 585/**
 586 *      orc_device_reset        -       device reset handler
 587 *      @host: host to reset
 588 *      @cmd: command causing the reset
 589 *      @target; target device
 590 *
 591 *      Reset registers, reset a hanging bus and kill active and disconnected
 592 *      commands for target w/o soft reset
 593 */
 594
 595static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsigned int target)
 596{                               /* I need Host Control Block Information */
 597        struct orc_scb *scb;
 598        struct orc_extended_scb *escb;
 599        struct orc_scb *host_scb;
 600        u8 i;
 601        unsigned long flags;
 602
 603        spin_lock_irqsave(&(host->allocation_lock), flags);
 604        scb = (struct orc_scb *) NULL;
 605        escb = (struct orc_extended_scb *) NULL;
 606
 607        /* setup scatter list address with one buffer */
 608        host_scb = host->scb_virt;
 609
 610        /* FIXME: is this safe if we then fail to issue the reset or race
 611           a completion ? */
 612        init_alloc_map(host);
 613
 614        /* Find the scb corresponding to the command */
 615        for (i = 0; i < ORC_MAXQUEUE; i++) {
 616                escb = host_scb->escb;
 617                if (host_scb->status && escb->srb == cmd)
 618                        break;
 619                host_scb++;
 620        }
 621
 622        if (i == ORC_MAXQUEUE) {
 623                printk(KERN_ERR "Unable to Reset - No SCB Found\n");
 624                spin_unlock_irqrestore(&(host->allocation_lock), flags);
 625                return FAILED;
 626        }
 627
 628        /* Allocate a new SCB for the reset command to the firmware */
 629        if ((scb = __orc_alloc_scb(host)) == NULL) {
 630                /* Can't happen.. */
 631                spin_unlock_irqrestore(&(host->allocation_lock), flags);
 632                return FAILED;
 633        }
 634
 635        /* Reset device is handled by the firmware, we fill in an SCB and
 636           fire it at the controller, it does the rest */
 637        scb->opcode = ORC_BUSDEVRST;
 638        scb->target = target;
 639        scb->hastat = 0;
 640        scb->tastat = 0;
 641        scb->status = 0x0;
 642        scb->link = 0xFF;
 643        scb->reserved0 = 0;
 644        scb->reserved1 = 0;
 645        scb->xferlen = cpu_to_le32(0);
 646        scb->sg_len = cpu_to_le32(0);
 647
 648        escb->srb = NULL;
 649        escb->srb = cmd;
 650        orc_exec_scb(host, scb);        /* Start execute SCB            */
 651        spin_unlock_irqrestore(&host->allocation_lock, flags);
 652        return SUCCESS;
 653}
 654
 655/**
 656 *      __orc_alloc_scb         -               allocate an SCB
 657 *      @host: host to allocate from
 658 *
 659 *      Allocate an SCB and return a pointer to the SCB object. NULL
 660 *      is returned if no SCB is free. The caller must already hold
 661 *      the allocator lock at this point.
 662 */
 663
 664
 665static struct orc_scb *__orc_alloc_scb(struct orc_host * host)
 666{
 667        u8 channel;
 668        unsigned long idx;
 669        u8 index;
 670        u8 i;
 671
 672        channel = host->index;
 673        for (i = 0; i < 8; i++) {
 674                for (index = 0; index < 32; index++) {
 675                        if ((host->allocation_map[channel][i] >> index) & 0x01) {
 676                                host->allocation_map[channel][i] &= ~(1 << index);
 677                                idx = index + 32 * i;
 678                                /*
 679                                 * Translate the index to a structure instance
 680                                 */
 681                                return host->scb_virt + idx;
 682                        }
 683                }
 684        }
 685        return NULL;
 686}
 687
 688/**
 689 *      orc_alloc_scb           -               allocate an SCB
 690 *      @host: host to allocate from
 691 *
 692 *      Allocate an SCB and return a pointer to the SCB object. NULL
 693 *      is returned if no SCB is free.
 694 */
 695
 696static struct orc_scb *orc_alloc_scb(struct orc_host * host)
 697{
 698        struct orc_scb *scb;
 699        unsigned long flags;
 700
 701        spin_lock_irqsave(&host->allocation_lock, flags);
 702        scb = __orc_alloc_scb(host);
 703        spin_unlock_irqrestore(&host->allocation_lock, flags);
 704        return scb;
 705}
 706
 707/**
 708 *      orc_release_scb                 -       release an SCB
 709 *      @host: host owning the SCB
 710 *      @scb: SCB that is now free
 711 *
 712 *      Called to return a completed SCB to the allocation pool. Before
 713 *      calling the SCB must be out of use on both the host and the HA.
 714 */
 715
 716static void orc_release_scb(struct orc_host *host, struct orc_scb *scb)
 717{
 718        unsigned long flags;
 719        u8 index, i, channel;
 720
 721        spin_lock_irqsave(&(host->allocation_lock), flags);
 722        channel = host->index;  /* Channel */
 723        index = scb->scbidx;
 724        i = index / 32;
 725        index %= 32;
 726        host->allocation_map[channel][i] |= (1 << index);
 727        spin_unlock_irqrestore(&(host->allocation_lock), flags);
 728}
 729
 730/**
 731 *      orchid_abort_scb        -       abort a command
 732 *
 733 *      Abort a queued command that has been passed to the firmware layer
 734 *      if possible. This is all handled by the firmware. We aks the firmware
 735 *      and it either aborts the command or fails
 736 */
 737
 738static int orchid_abort_scb(struct orc_host * host, struct orc_scb * scb)
 739{
 740        unsigned char data, status;
 741
 742        outb(ORC_CMD_ABORT_SCB, host->base + ORC_HDATA);        /* Write command */
 743        outb(HDO, host->base + ORC_HCTRL);
 744        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 745                return 0;
 746
 747        outb(scb->scbidx, host->base + ORC_HDATA);      /* Write address */
 748        outb(HDO, host->base + ORC_HCTRL);
 749        if (wait_HDO_off(host) == 0)    /* Wait HDO off   */
 750                return 0;
 751
 752        if (wait_hdi_set(host, &data) == 0)     /* Wait HDI set   */
 753                return 0;
 754        status = inb(host->base + ORC_HDATA);
 755        outb(data, host->base + ORC_HSTUS);     /* Clear HDI    */
 756
 757        if (status == 1)        /* 0 - Successfully               */
 758                return 0;       /* 1 - Fail                     */
 759        return 1;
 760}
 761
 762static int inia100_abort_cmd(struct orc_host * host, struct scsi_cmnd *cmd)
 763{
 764        struct orc_extended_scb *escb;
 765        struct orc_scb *scb;
 766        u8 i;
 767        unsigned long flags;
 768
 769        spin_lock_irqsave(&(host->allocation_lock), flags);
 770
 771        scb = host->scb_virt;
 772
 773        /* Walk the queue until we find the SCB that belongs to the command
 774           block. This isn't a performance critical path so a walk in the park
 775           here does no harm */
 776
 777        for (i = 0; i < ORC_MAXQUEUE; i++, scb++) {
 778                escb = scb->escb;
 779                if (scb->status && escb->srb == cmd) {
 780                        if (scb->tag_msg == 0) {
 781                                goto out;
 782                        } else {
 783                                /* Issue an ABORT to the firmware */
 784                                if (orchid_abort_scb(host, scb)) {
 785                                        escb->srb = NULL;
 786                                        spin_unlock_irqrestore(&host->allocation_lock, flags);
 787                                        return SUCCESS;
 788                                } else
 789                                        goto out;
 790                        }
 791                }
 792        }
 793out:
 794        spin_unlock_irqrestore(&host->allocation_lock, flags);
 795        return FAILED;
 796}
 797
 798/**
 799 *      orc_interrupt           -       IRQ processing
 800 *      @host: Host causing the interrupt
 801 *
 802 *      This function is called from the IRQ handler and protected
 803 *      by the host lock. While the controller reports that there are
 804 *      scb's for processing we pull them off the controller, turn the
 805 *      index into a host address pointer to the scb and call the scb
 806 *      handler.
 807 *
 808 *      Returns IRQ_HANDLED if any SCBs were processed, IRQ_NONE otherwise
 809 */
 810
 811static irqreturn_t orc_interrupt(struct orc_host * host)
 812{
 813        u8 scb_index;
 814        struct orc_scb *scb;
 815
 816        /* Check if we have an SCB queued for servicing */
 817        if (inb(host->base + ORC_RQUEUECNT) == 0)
 818                return IRQ_NONE;
 819
 820        do {
 821                /* Get the SCB index of the SCB to service */
 822                scb_index = inb(host->base + ORC_RQUEUE);
 823
 824                /* Translate it back to a host pointer */
 825                scb = (struct orc_scb *) ((unsigned long) host->scb_virt + (unsigned long) (sizeof(struct orc_scb) * scb_index));
 826                scb->status = 0x0;
 827                /* Process the SCB */
 828                inia100_scb_handler(host, scb);
 829        } while (inb(host->base + ORC_RQUEUECNT));
 830        return IRQ_HANDLED;
 831}                               /* End of I1060Interrupt() */
 832
 833/**
 834 *      inia100_build_scb       -       build SCB
 835 *      @host: host owing the control block
 836 *      @scb: control block to use
 837 *      @cmd: Mid layer command
 838 *
 839 *      Build a host adapter control block from the SCSI mid layer command
 840 */
 841
 842static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struct scsi_cmnd * cmd)
 843{                               /* Create corresponding SCB     */
 844        struct scatterlist *sg;
 845        struct orc_sgent *sgent;                /* Pointer to SG list           */
 846        int i, count_sg;
 847        struct orc_extended_scb *escb;
 848
 849        /* Links between the escb, scb and Linux scsi midlayer cmd */
 850        escb = scb->escb;
 851        escb->srb = cmd;
 852        sgent = NULL;
 853
 854        /* Set up the SCB to do a SCSI command block */
 855        scb->opcode = ORC_EXECSCSI;
 856        scb->flags = SCF_NO_DCHK;       /* Clear done bit               */
 857        scb->target = cmd->device->id;
 858        scb->lun = cmd->device->lun;
 859        scb->reserved0 = 0;
 860        scb->reserved1 = 0;
 861        scb->sg_len = cpu_to_le32(0);
 862
 863        scb->xferlen = cpu_to_le32((u32) scsi_bufflen(cmd));
 864        sgent = (struct orc_sgent *) & escb->sglist[0];
 865
 866        count_sg = scsi_dma_map(cmd);
 867        if (count_sg < 0)
 868                return count_sg;
 869        BUG_ON(count_sg > TOTAL_SG_ENTRY);
 870
 871        /* Build the scatter gather lists */
 872        if (count_sg) {
 873                scb->sg_len = cpu_to_le32((u32) (count_sg * 8));
 874                scsi_for_each_sg(cmd, sg, count_sg, i) {
 875                        sgent->base = cpu_to_le32((u32) sg_dma_address(sg));
 876                        sgent->length = cpu_to_le32((u32) sg_dma_len(sg));
 877                        sgent++;
 878                }
 879        } else {
 880                scb->sg_len = cpu_to_le32(0);
 881                sgent->base = cpu_to_le32(0);
 882                sgent->length = cpu_to_le32(0);
 883        }
 884        scb->sg_addr = (u32) scb->sense_addr;   /* sense_addr is already little endian */
 885        scb->hastat = 0;
 886        scb->tastat = 0;
 887        scb->link = 0xFF;
 888        scb->sense_len = SENSE_SIZE;
 889        scb->cdb_len = cmd->cmd_len;
 890        if (scb->cdb_len >= IMAX_CDB) {
 891                printk("max cdb length= %x\b", cmd->cmd_len);
 892                scb->cdb_len = IMAX_CDB;
 893        }
 894        scb->ident = cmd->device->lun | DISC_ALLOW;
 895        if (cmd->device->tagged_supported) {    /* Tag Support                  */
 896                scb->tag_msg = SIMPLE_QUEUE_TAG;        /* Do simple tag only   */
 897        } else {
 898                scb->tag_msg = 0;       /* No tag support               */
 899        }
 900        memcpy(scb->cdb, cmd->cmnd, scb->cdb_len);
 901        return 0;
 902}
 903
 904/**
 905 *      inia100_queue           -       queue command with host
 906 *      @cmd: Command block
 907 *      @done: Completion function
 908 *
 909 *      Called by the mid layer to queue a command. Process the command
 910 *      block, build the host specific scb structures and if there is room
 911 *      queue the command down to the controller
 912 */
 913
 914static int inia100_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 915{
 916        struct orc_scb *scb;
 917        struct orc_host *host;          /* Point to Host adapter control block */
 918
 919        host = (struct orc_host *) cmd->device->host->hostdata;
 920        cmd->scsi_done = done;
 921        /* Get free SCSI control block  */
 922        if ((scb = orc_alloc_scb(host)) == NULL)
 923                return SCSI_MLQUEUE_HOST_BUSY;
 924
 925        if (inia100_build_scb(host, scb, cmd)) {
 926                orc_release_scb(host, scb);
 927                return SCSI_MLQUEUE_HOST_BUSY;
 928        }
 929        orc_exec_scb(host, scb);        /* Start execute SCB            */
 930        return 0;
 931}
 932
 933static DEF_SCSI_QCMD(inia100_queue)
 934
 935/*****************************************************************************
 936 Function name  : inia100_abort
 937 Description    : Abort a queued command.
 938                         (commands that are on the bus can't be aborted easily)
 939 Input          : host  -       Pointer to host adapter structure
 940 Output         : None.
 941 Return         : pSRB  -       Pointer to SCSI request block.
 942*****************************************************************************/
 943static int inia100_abort(struct scsi_cmnd * cmd)
 944{
 945        struct orc_host *host;
 946
 947        host = (struct orc_host *) cmd->device->host->hostdata;
 948        return inia100_abort_cmd(host, cmd);
 949}
 950
 951/*****************************************************************************
 952 Function name  : inia100_reset
 953 Description    : Reset registers, reset a hanging bus and
 954                  kill active and disconnected commands for target w/o soft reset
 955 Input          : host  -       Pointer to host adapter structure
 956 Output         : None.
 957 Return         : pSRB  -       Pointer to SCSI request block.
 958*****************************************************************************/
 959static int inia100_bus_reset(struct scsi_cmnd * cmd)
 960{                               /* I need Host Control Block Information */
 961        struct orc_host *host;
 962        host = (struct orc_host *) cmd->device->host->hostdata;
 963        return orc_reset_scsi_bus(host);
 964}
 965
 966/*****************************************************************************
 967 Function name  : inia100_device_reset
 968 Description    : Reset the device
 969 Input          : host  -       Pointer to host adapter structure
 970 Output         : None.
 971 Return         : pSRB  -       Pointer to SCSI request block.
 972*****************************************************************************/
 973static int inia100_device_reset(struct scsi_cmnd * cmd)
 974{                               /* I need Host Control Block Information */
 975        struct orc_host *host;
 976        host = (struct orc_host *) cmd->device->host->hostdata;
 977        return orc_device_reset(host, cmd, scmd_id(cmd));
 978
 979}
 980
 981/**
 982 *      inia100_scb_handler     -       interrupt callback
 983 *      @host: Host causing the interrupt
 984 *      @scb: SCB the controller returned as needing processing
 985 *
 986 *      Perform completion processing on a control block. Do the conversions
 987 *      from host to SCSI midlayer error coding, save any sense data and
 988 *      the complete with the midlayer and recycle the scb.
 989 */
 990
 991static void inia100_scb_handler(struct orc_host *host, struct orc_scb *scb)
 992{
 993        struct scsi_cmnd *cmd;  /* Pointer to SCSI request block */
 994        struct orc_extended_scb *escb;
 995
 996        escb = scb->escb;
 997        if ((cmd = (struct scsi_cmnd *) escb->srb) == NULL) {
 998                printk(KERN_ERR "inia100_scb_handler: SRB pointer is empty\n");
 999                orc_release_scb(host, scb);     /* Release SCB for current channel */
1000                return;
1001        }
1002        escb->srb = NULL;
1003
1004        switch (scb->hastat) {
1005        case 0x0:
1006        case 0xa:               /* Linked command complete without error and linked normally */
1007        case 0xb:               /* Linked command complete without error interrupt generated */
1008                scb->hastat = 0;
1009                break;
1010
1011        case 0x11:              /* Selection time out-The initiator selection or target
1012                                   reselection was not complete within the SCSI Time out period */
1013                scb->hastat = DID_TIME_OUT;
1014                break;
1015
1016        case 0x14:              /* Target bus phase sequence failure-An invalid bus phase or bus
1017                                   phase sequence was requested by the target. The host adapter
1018                                   will generate a SCSI Reset Condition, notifying the host with
1019                                   a SCRD interrupt */
1020                scb->hastat = DID_RESET;
1021                break;
1022
1023        case 0x1a:              /* SCB Aborted. 07/21/98 */
1024                scb->hastat = DID_ABORT;
1025                break;
1026
1027        case 0x12:              /* Data overrun/underrun-The target attempted to transfer more data
1028                                   than was allocated by the Data Length field or the sum of the
1029                                   Scatter / Gather Data Length fields. */
1030        case 0x13:              /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
1031        case 0x16:              /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */
1032
1033        default:
1034                printk(KERN_DEBUG "inia100: %x %x\n", scb->hastat, scb->tastat);
1035                scb->hastat = DID_ERROR;        /* Couldn't find any better */
1036                break;
1037        }
1038
1039        if (scb->tastat == 2) { /* Check condition              */
1040                memcpy((unsigned char *) &cmd->sense_buffer[0],
1041                   (unsigned char *) &escb->sglist[0], SENSE_SIZE);
1042        }
1043        cmd->result = scb->tastat | (scb->hastat << 16);
1044        scsi_dma_unmap(cmd);
1045        cmd->scsi_done(cmd);    /* Notify system DONE           */
1046        orc_release_scb(host, scb);     /* Release SCB for current channel */
1047}
1048
1049/**
1050 *      inia100_intr            -       interrupt handler
1051 *      @irqno: Interrupt value
1052 *      @devid: Host adapter
1053 *
1054 *      Entry point for IRQ handling. All the real work is performed
1055 *      by orc_interrupt.
1056 */
1057static irqreturn_t inia100_intr(int irqno, void *devid)
1058{
1059        struct Scsi_Host *shost = (struct Scsi_Host *)devid;
1060        struct orc_host *host = (struct orc_host *)shost->hostdata;
1061        unsigned long flags;
1062        irqreturn_t res;
1063
1064        spin_lock_irqsave(shost->host_lock, flags);
1065        res = orc_interrupt(host);
1066        spin_unlock_irqrestore(shost->host_lock, flags);
1067
1068        return res;
1069}
1070
1071static struct scsi_host_template inia100_template = {
1072        .proc_name              = "inia100",
1073        .name                   = inia100_REVID,
1074        .queuecommand           = inia100_queue,
1075        .eh_abort_handler       = inia100_abort,
1076        .eh_bus_reset_handler   = inia100_bus_reset,
1077        .eh_device_reset_handler = inia100_device_reset,
1078        .can_queue              = 1,
1079        .this_id                = 1,
1080        .sg_tablesize           = SG_ALL,
1081        .cmd_per_lun            = 1,
1082        .use_clustering         = ENABLE_CLUSTERING,
1083};
1084
1085static int inia100_probe_one(struct pci_dev *pdev,
1086                             const struct pci_device_id *id)
1087{
1088        struct Scsi_Host *shost;
1089        struct orc_host *host;
1090        unsigned long port, bios;
1091        int error = -ENODEV;
1092        u32 sz;
1093        unsigned long biosaddr;
1094        char *bios_phys;
1095
1096        if (pci_enable_device(pdev))
1097                goto out;
1098        if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
1099                printk(KERN_WARNING "Unable to set 32bit DMA "
1100                                    "on inia100 adapter, ignoring.\n");
1101                goto out_disable_device;
1102        }
1103
1104        pci_set_master(pdev);
1105
1106        port = pci_resource_start(pdev, 0);
1107        if (!request_region(port, 256, "inia100")) {
1108                printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port);
1109                goto out_disable_device;
1110        }
1111
1112        /* <02> read from base address + 0x50 offset to get the bios value. */
1113        bios = inw(port + 0x50);
1114
1115
1116        shost = scsi_host_alloc(&inia100_template, sizeof(struct orc_host));
1117        if (!shost)
1118                goto out_release_region;
1119
1120        host = (struct orc_host *)shost->hostdata;
1121        host->pdev = pdev;
1122        host->base = port;
1123        host->BIOScfg = bios;
1124        spin_lock_init(&host->allocation_lock);
1125
1126        /* Get total memory needed for SCB */
1127        sz = ORC_MAXQUEUE * sizeof(struct orc_scb);
1128        host->scb_virt = pci_alloc_consistent(pdev, sz,
1129                        &host->scb_phys);
1130        if (!host->scb_virt) {
1131                printk("inia100: SCB memory allocation error\n");
1132                goto out_host_put;
1133        }
1134        memset(host->scb_virt, 0, sz);
1135
1136        /* Get total memory needed for ESCB */
1137        sz = ORC_MAXQUEUE * sizeof(struct orc_extended_scb);
1138        host->escb_virt = pci_alloc_consistent(pdev, sz,
1139                        &host->escb_phys);
1140        if (!host->escb_virt) {
1141                printk("inia100: ESCB memory allocation error\n");
1142                goto out_free_scb_array;
1143        }
1144        memset(host->escb_virt, 0, sz);
1145
1146        biosaddr = host->BIOScfg;
1147        biosaddr = (biosaddr << 4);
1148        bios_phys = phys_to_virt(biosaddr);
1149        if (init_orchid(host)) {        /* Initialize orchid chip */
1150                printk("inia100: initial orchid fail!!\n");
1151                goto out_free_escb_array;
1152        }
1153
1154        shost->io_port = host->base;
1155        shost->n_io_port = 0xff;
1156        shost->can_queue = ORC_MAXQUEUE;
1157        shost->unique_id = shost->io_port;
1158        shost->max_id = host->max_targets;
1159        shost->max_lun = 16;
1160        shost->irq = pdev->irq;
1161        shost->this_id = host->scsi_id; /* Assign HCS index */
1162        shost->sg_tablesize = TOTAL_SG_ENTRY;
1163
1164        /* Initial orc chip           */
1165        error = request_irq(pdev->irq, inia100_intr, IRQF_SHARED,
1166                        "inia100", shost);
1167        if (error < 0) {
1168                printk(KERN_WARNING "inia100: unable to get irq %d\n",
1169                                pdev->irq);
1170                goto out_free_escb_array;
1171        }
1172
1173        pci_set_drvdata(pdev, shost);
1174
1175        error = scsi_add_host(shost, &pdev->dev);
1176        if (error)
1177                goto out_free_irq;
1178
1179        scsi_scan_host(shost);
1180        return 0;
1181
1182out_free_irq:
1183        free_irq(shost->irq, shost);
1184out_free_escb_array:
1185        pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb),
1186                        host->escb_virt, host->escb_phys);
1187out_free_scb_array:
1188        pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb),
1189                        host->scb_virt, host->scb_phys);
1190out_host_put:
1191        scsi_host_put(shost);
1192out_release_region:
1193        release_region(port, 256);
1194out_disable_device:
1195        pci_disable_device(pdev);
1196out:
1197        return error;
1198}
1199
1200static void inia100_remove_one(struct pci_dev *pdev)
1201{
1202        struct Scsi_Host *shost = pci_get_drvdata(pdev);
1203        struct orc_host *host = (struct orc_host *)shost->hostdata;
1204
1205        scsi_remove_host(shost);
1206
1207        free_irq(shost->irq, shost);
1208        pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_extended_scb),
1209                        host->escb_virt, host->escb_phys);
1210        pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(struct orc_scb),
1211                        host->scb_virt, host->scb_phys);
1212        release_region(shost->io_port, 256);
1213
1214        scsi_host_put(shost);
1215} 
1216
1217static struct pci_device_id inia100_pci_tbl[] = {
1218        {PCI_VENDOR_ID_INIT, 0x1060, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
1219        {0,}
1220};
1221MODULE_DEVICE_TABLE(pci, inia100_pci_tbl);
1222
1223static struct pci_driver inia100_pci_driver = {
1224        .name           = "inia100",
1225        .id_table       = inia100_pci_tbl,
1226        .probe          = inia100_probe_one,
1227        .remove         = inia100_remove_one,
1228};
1229
1230static int __init inia100_init(void)
1231{
1232        return pci_register_driver(&inia100_pci_driver);
1233}
1234
1235static void __exit inia100_exit(void)
1236{
1237        pci_unregister_driver(&inia100_pci_driver);
1238}
1239
1240MODULE_DESCRIPTION("Initio A100U2W SCSI driver");
1241MODULE_AUTHOR("Initio Corporation");
1242MODULE_LICENSE("Dual BSD/GPL");
1243
1244module_init(inia100_init);
1245module_exit(inia100_exit);
1246