linux/drivers/staging/netlogic/xlr_net.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2003-2012 Broadcom Corporation
   3 * All Rights Reserved
   4 *
   5 * This software is available to you under a choice of one of two
   6 * licenses.  You may choose to be licensed under the terms of the GNU
   7 * General Public License (GPL) Version 2, available from the file
   8 * COPYING in the main directory of this source tree, or the Broadcom
   9 * license below:
  10 *
  11 * Redistribution and use in source and binary forms, with or without
  12 * modification, are permitted provided that the following conditions
  13 * are met:
  14 *
  15 * 1. Redistributions of source code must retain the above copyright
  16 *    notice, this list of conditions and the following disclaimer.
  17 * 2. Redistributions in binary form must reproduce the above copyright
  18 *    notice, this list of conditions and the following disclaimer in
  19 *    the documentation and/or other materials provided with the
  20 *    distribution.
  21 *
  22 * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
  23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  24 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  25 * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
  26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
  29 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  30 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
  31 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
  32 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33 */
  34#include <linux/phy.h>
  35#include <linux/delay.h>
  36#include <linux/netdevice.h>
  37#include <linux/smp.h>
  38#include <linux/ethtool.h>
  39#include <linux/module.h>
  40#include <linux/etherdevice.h>
  41#include <linux/skbuff.h>
  42#include <linux/jiffies.h>
  43#include <linux/interrupt.h>
  44#include <linux/platform_device.h>
  45
  46#include <asm/mipsregs.h>
  47
  48/* fmn.h - For FMN credit configuration and registering fmn_handler.
  49 * FMN is communication mechanism that allows processing agents within
  50 * XLR/XLS to communicate each other.
  51 */
  52#include <asm/netlogic/xlr/fmn.h>
  53
  54#include "platform_net.h"
  55#include "xlr_net.h"
  56
  57/*
  58 * The readl/writel implementation byteswaps on XLR/XLS, so
  59 * we need to use __raw_ IO to read the NAE registers
  60 * because they are in the big-endian MMIO area on the SoC.
  61 */
  62static inline void xlr_nae_wreg(u32 __iomem *base, unsigned int reg, u32 val)
  63{
  64        __raw_writel(val, base + reg);
  65}
  66
  67static inline u32 xlr_nae_rdreg(u32 __iomem *base, unsigned int reg)
  68{
  69        return __raw_readl(base + reg);
  70}
  71
  72static inline void xlr_reg_update(u32 *base_addr,
  73                u32 off, u32 val, u32 mask)
  74{
  75        u32 tmp;
  76
  77        tmp = xlr_nae_rdreg(base_addr, off);
  78        xlr_nae_wreg(base_addr, off, (tmp & ~mask) | (val & mask));
  79}
  80
  81/*
  82 * Table of net_device pointers indexed by port, this will be used to
  83 * lookup the net_device corresponding to a port by the message ring handler.
  84 *
  85 * Maximum ports in XLR/XLS is 8(8 GMAC on XLS, 4 GMAC + 2 XGMAC on XLR)
  86 */
  87static struct net_device *mac_to_ndev[8];
  88
  89static inline struct sk_buff *mac_get_skb_back_ptr(void *addr)
  90{
  91        struct sk_buff **back_ptr;
  92
  93        /* this function should be used only for newly allocated packets.
  94         * It assumes the first cacheline is for the back pointer related
  95         * book keeping info.
  96         */
  97        back_ptr = (struct sk_buff **)(addr - MAC_SKB_BACK_PTR_SIZE);
  98        return *back_ptr;
  99}
 100
 101static inline void mac_put_skb_back_ptr(struct sk_buff *skb)
 102{
 103        struct sk_buff **back_ptr = (struct sk_buff **)skb->data;
 104
 105        /* this function should be used only for newly allocated packets.
 106         * It assumes the first cacheline is for the back pointer related
 107         * book keeping info.
 108         */
 109        skb_reserve(skb, MAC_SKB_BACK_PTR_SIZE);
 110        *back_ptr = skb;
 111}
 112
 113static int send_to_rfr_fifo(struct xlr_net_priv *priv, void *addr)
 114{
 115        struct nlm_fmn_msg msg;
 116        int ret = 0, num_try = 0, stnid;
 117        unsigned long paddr, mflags;
 118
 119        paddr = virt_to_bus(addr);
 120        msg.msg0 = (u64)paddr & 0xffffffffe0ULL;
 121        msg.msg1 = 0;
 122        msg.msg2 = 0;
 123        msg.msg3 = 0;
 124        stnid = priv->nd->rfr_station;
 125        do {
 126                mflags = nlm_cop2_enable();
 127                ret = nlm_fmn_send(1, 0, stnid, &msg);
 128                nlm_cop2_restore(mflags);
 129                if (ret == 0)
 130                        return 0;
 131        } while (++num_try < 10000);
 132
 133        pr_err("Send to RFR failed in RX path\n");
 134        return ret;
 135}
 136
 137static inline struct sk_buff *xlr_alloc_skb(void)
 138{
 139        struct sk_buff *skb;
 140
 141        /* skb->data is cache aligned */
 142        skb = alloc_skb(XLR_RX_BUF_SIZE, GFP_ATOMIC);
 143        if (!skb) {
 144                pr_err("SKB allocation failed\n");
 145                return NULL;
 146        }
 147        mac_put_skb_back_ptr(skb);
 148        return skb;
 149}
 150
 151static void xlr_net_fmn_handler(int bkt, int src_stnid, int size,
 152                int code, struct nlm_fmn_msg *msg, void *arg)
 153{
 154        struct sk_buff *skb, *skb_new = NULL;
 155        struct net_device *ndev;
 156        struct xlr_net_priv *priv;
 157        u64 length, port;
 158        void *addr;
 159
 160        length = (msg->msg0 >> 40) & 0x3fff;
 161        if (length == 0) {
 162                addr = bus_to_virt(msg->msg0 & 0xffffffffffULL);
 163                dev_kfree_skb_any(addr);
 164        } else if (length) {
 165                addr = bus_to_virt(msg->msg0 & 0xffffffffe0ULL);
 166                length = length - BYTE_OFFSET - MAC_CRC_LEN;
 167                port = msg->msg0 & 0x0f;
 168                if (src_stnid == FMN_STNID_GMAC1)
 169                        port = port + 4;
 170                skb = mac_get_skb_back_ptr(addr);
 171                skb->dev = mac_to_ndev[port];
 172                ndev = skb->dev;
 173                priv = netdev_priv(ndev);
 174
 175                /* 16 byte IP header align */
 176                skb_reserve(skb, BYTE_OFFSET);
 177                skb_put(skb, length);
 178                skb->protocol = eth_type_trans(skb, skb->dev);
 179                skb->dev->last_rx = jiffies;
 180                netif_rx(skb);
 181                /* Fill rx ring */
 182                skb_new = xlr_alloc_skb();
 183                if (skb_new)
 184                        send_to_rfr_fifo(priv, skb_new->data);
 185        }
 186        return;
 187}
 188
 189/* Ethtool operation */
 190static int xlr_get_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
 191{
 192        struct xlr_net_priv *priv = netdev_priv(ndev);
 193        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 194
 195        if (!phydev)
 196                return -ENODEV;
 197        return phy_ethtool_gset(phydev, ecmd);
 198}
 199
 200static int xlr_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
 201{
 202        struct xlr_net_priv *priv = netdev_priv(ndev);
 203        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 204
 205        if (!phydev)
 206                return -ENODEV;
 207        return phy_ethtool_sset(phydev, ecmd);
 208}
 209
 210static struct ethtool_ops xlr_ethtool_ops = {
 211        .get_settings = xlr_get_settings,
 212        .set_settings = xlr_set_settings,
 213};
 214
 215/* Net operations */
 216static int xlr_net_fill_rx_ring(struct net_device *ndev)
 217{
 218        struct sk_buff *skb;
 219        struct xlr_net_priv *priv = netdev_priv(ndev);
 220        int i;
 221
 222        for (i = 0; i < MAX_FRIN_SPILL/2; i++) {
 223                skb = xlr_alloc_skb();
 224                if (!skb)
 225                        return -ENOMEM;
 226                send_to_rfr_fifo(priv, skb->data);
 227        }
 228        pr_info("Rx ring setup done\n");
 229        return 0;
 230}
 231
 232static int xlr_net_open(struct net_device *ndev)
 233{
 234        u32 err;
 235        struct xlr_net_priv *priv = netdev_priv(ndev);
 236        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 237
 238        /* schedule a link state check */
 239        phy_start(phydev);
 240
 241        err = phy_start_aneg(phydev);
 242        if (err) {
 243                pr_err("Autoneg failed\n");
 244                return err;
 245        }
 246
 247        /* Setup the speed from PHY to internal reg*/
 248        xlr_set_gmac_speed(priv);
 249        netif_tx_start_all_queues(ndev);
 250        return 0;
 251}
 252
 253static int xlr_net_stop(struct net_device *ndev)
 254{
 255        struct xlr_net_priv *priv = netdev_priv(ndev);
 256        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 257
 258        phy_stop(phydev);
 259        netif_tx_stop_all_queues(ndev);
 260        return 0;
 261}
 262
 263static void xlr_make_tx_desc(struct nlm_fmn_msg *msg, unsigned long addr,
 264                struct sk_buff *skb)
 265{
 266        unsigned long physkb = virt_to_phys(skb);
 267        int cpu_core = nlm_core_id();
 268        int fr_stn_id = cpu_core * 8 + XLR_FB_STN;      /* FB to 6th bucket */
 269        msg->msg0 = (((u64)1 << 63)     |       /* End of packet descriptor */
 270                ((u64)127 << 54)        |       /* No Free back */
 271                (u64)skb->len << 40     |       /* Length of data */
 272                ((u64)addr));
 273        msg->msg1 = (((u64)1 << 63)     |
 274                ((u64)fr_stn_id << 54)  |       /* Free back id */
 275                (u64)0 << 40            |       /* Set len to 0 */
 276                ((u64)physkb  & 0xffffffff));   /* 32bit address */
 277        msg->msg2 = msg->msg3 = 0;
 278}
 279
 280static void __maybe_unused xlr_wakeup_queue(unsigned long dev)
 281{
 282        struct net_device *ndev = (struct net_device *) dev;
 283        struct xlr_net_priv *priv = netdev_priv(ndev);
 284        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 285
 286        if (phydev->link)
 287                netif_tx_wake_queue(netdev_get_tx_queue(ndev, priv->wakeup_q));
 288}
 289
 290static netdev_tx_t xlr_net_start_xmit(struct sk_buff *skb,
 291                struct net_device *ndev)
 292{
 293        struct nlm_fmn_msg msg;
 294        struct xlr_net_priv *priv = netdev_priv(ndev);
 295        int ret;
 296        u32 flags;
 297
 298        xlr_make_tx_desc(&msg, virt_to_phys(skb->data), skb);
 299        flags = nlm_cop2_enable();
 300        ret = nlm_fmn_send(2, 0, priv->nd->tx_stnid, &msg);
 301        nlm_cop2_restore(flags);
 302        if (ret)
 303                dev_kfree_skb_any(skb);
 304        return NETDEV_TX_OK;
 305}
 306
 307static u16 xlr_net_select_queue(struct net_device *ndev, struct sk_buff *skb)
 308{
 309        return (u16)smp_processor_id();
 310}
 311
 312static void xlr_hw_set_mac_addr(struct net_device *ndev)
 313{
 314        struct xlr_net_priv *priv = netdev_priv(ndev);
 315
 316        /* set mac station address */
 317        xlr_nae_wreg(priv->base_addr, R_MAC_ADDR0,
 318                ((ndev->dev_addr[5] << 24) | (ndev->dev_addr[4] << 16) |
 319                (ndev->dev_addr[3] << 8) | (ndev->dev_addr[2])));
 320        xlr_nae_wreg(priv->base_addr, R_MAC_ADDR0 + 1,
 321                ((ndev->dev_addr[1] << 24) | (ndev->dev_addr[0] << 16)));
 322
 323        xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK2, 0xffffffff);
 324        xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK2 + 1, 0xffffffff);
 325        xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK3, 0xffffffff);
 326        xlr_nae_wreg(priv->base_addr, R_MAC_ADDR_MASK3 + 1, 0xffffffff);
 327
 328        xlr_nae_wreg(priv->base_addr, R_MAC_FILTER_CONFIG,
 329                (1 << O_MAC_FILTER_CONFIG__BROADCAST_EN) |
 330                (1 << O_MAC_FILTER_CONFIG__ALL_MCAST_EN) |
 331                (1 << O_MAC_FILTER_CONFIG__MAC_ADDR0_VALID));
 332
 333        if (priv->nd->phy_interface == PHY_INTERFACE_MODE_RGMII ||
 334                        priv->nd->phy_interface == PHY_INTERFACE_MODE_SGMII)
 335                xlr_reg_update(priv->base_addr, R_IPG_IFG, MAC_B2B_IPG, 0x7f);
 336}
 337
 338static int xlr_net_set_mac_addr(struct net_device *ndev, void *data)
 339{
 340        int err;
 341
 342        err = eth_mac_addr(ndev, data);
 343        if (err)
 344                return err;
 345        xlr_hw_set_mac_addr(ndev);
 346        return 0;
 347}
 348
 349static void xlr_set_rx_mode(struct net_device *ndev)
 350{
 351        struct xlr_net_priv *priv = netdev_priv(ndev);
 352        u32 regval;
 353
 354        regval = xlr_nae_rdreg(priv->base_addr, R_MAC_FILTER_CONFIG);
 355
 356        if (ndev->flags & IFF_PROMISC) {
 357                regval |= (1 << O_MAC_FILTER_CONFIG__BROADCAST_EN) |
 358                (1 << O_MAC_FILTER_CONFIG__PAUSE_FRAME_EN) |
 359                (1 << O_MAC_FILTER_CONFIG__ALL_MCAST_EN) |
 360                (1 << O_MAC_FILTER_CONFIG__ALL_UCAST_EN);
 361        } else {
 362                regval &= ~((1 << O_MAC_FILTER_CONFIG__PAUSE_FRAME_EN) |
 363                (1 << O_MAC_FILTER_CONFIG__ALL_UCAST_EN));
 364        }
 365
 366        xlr_nae_wreg(priv->base_addr, R_MAC_FILTER_CONFIG, regval);
 367}
 368
 369static void xlr_stats(struct net_device *ndev, struct rtnl_link_stats64 *stats)
 370{
 371        struct xlr_net_priv *priv = netdev_priv(ndev);
 372
 373        stats->rx_packets = xlr_nae_rdreg(priv->base_addr, RX_PACKET_COUNTER);
 374        stats->tx_packets = xlr_nae_rdreg(priv->base_addr, TX_PACKET_COUNTER);
 375        stats->rx_bytes = xlr_nae_rdreg(priv->base_addr, RX_BYTE_COUNTER);
 376        stats->tx_bytes = xlr_nae_rdreg(priv->base_addr, TX_BYTE_COUNTER);
 377        stats->tx_errors = xlr_nae_rdreg(priv->base_addr, TX_FCS_ERROR_COUNTER);
 378        stats->rx_dropped = xlr_nae_rdreg(priv->base_addr,
 379                        RX_DROP_PACKET_COUNTER);
 380        stats->tx_dropped = xlr_nae_rdreg(priv->base_addr,
 381                        TX_DROP_FRAME_COUNTER);
 382
 383        stats->multicast = xlr_nae_rdreg(priv->base_addr,
 384                        RX_MULTICAST_PACKET_COUNTER);
 385        stats->collisions = xlr_nae_rdreg(priv->base_addr,
 386                        TX_TOTAL_COLLISION_COUNTER);
 387
 388        stats->rx_length_errors = xlr_nae_rdreg(priv->base_addr,
 389                        RX_FRAME_LENGTH_ERROR_COUNTER);
 390        stats->rx_over_errors = xlr_nae_rdreg(priv->base_addr,
 391                        RX_DROP_PACKET_COUNTER);
 392        stats->rx_crc_errors = xlr_nae_rdreg(priv->base_addr,
 393                        RX_FCS_ERROR_COUNTER);
 394        stats->rx_frame_errors = xlr_nae_rdreg(priv->base_addr,
 395                        RX_ALIGNMENT_ERROR_COUNTER);
 396
 397        stats->rx_fifo_errors = xlr_nae_rdreg(priv->base_addr,
 398                        RX_DROP_PACKET_COUNTER);
 399        stats->rx_missed_errors = xlr_nae_rdreg(priv->base_addr,
 400                        RX_CARRIER_SENSE_ERROR_COUNTER);
 401
 402        stats->rx_errors = (stats->rx_over_errors + stats->rx_crc_errors +
 403                        stats->rx_frame_errors + stats->rx_fifo_errors +
 404                        stats->rx_missed_errors);
 405
 406        stats->tx_aborted_errors = xlr_nae_rdreg(priv->base_addr,
 407                        TX_EXCESSIVE_COLLISION_PACKET_COUNTER);
 408        stats->tx_carrier_errors = xlr_nae_rdreg(priv->base_addr,
 409                        TX_DROP_FRAME_COUNTER);
 410        stats->tx_fifo_errors = xlr_nae_rdreg(priv->base_addr,
 411                        TX_DROP_FRAME_COUNTER);
 412}
 413
 414static struct rtnl_link_stats64 *xlr_get_stats64(struct net_device *ndev,
 415                struct rtnl_link_stats64 *stats)
 416{
 417        xlr_stats(ndev, stats);
 418        return stats;
 419}
 420
 421static struct net_device_ops xlr_netdev_ops = {
 422        .ndo_open = xlr_net_open,
 423        .ndo_stop = xlr_net_stop,
 424        .ndo_start_xmit = xlr_net_start_xmit,
 425        .ndo_select_queue = xlr_net_select_queue,
 426        .ndo_set_mac_address = xlr_net_set_mac_addr,
 427        .ndo_set_rx_mode = xlr_set_rx_mode,
 428        .ndo_get_stats64 = xlr_get_stats64,
 429};
 430
 431/* Gmac init */
 432static void *xlr_config_spill(struct xlr_net_priv *priv, int reg_start_0,
 433                int reg_start_1, int reg_size, int size)
 434{
 435        void *spill;
 436        u32 *base;
 437        unsigned long phys_addr;
 438        u32 spill_size;
 439
 440        base = priv->base_addr;
 441        spill_size = size;
 442        spill = kmalloc(spill_size + SMP_CACHE_BYTES, GFP_ATOMIC);
 443        if (!spill)
 444                pr_err("Unable to allocate memory for spill area!\n");
 445
 446        spill = PTR_ALIGN(spill, SMP_CACHE_BYTES);
 447        phys_addr = virt_to_phys(spill);
 448        dev_dbg(&priv->ndev->dev, "Allocated spill %d bytes at %lx\n",
 449                        size, phys_addr);
 450        xlr_nae_wreg(base, reg_start_0, (phys_addr >> 5) & 0xffffffff);
 451        xlr_nae_wreg(base, reg_start_1, ((u64)phys_addr >> 37) & 0x07);
 452        xlr_nae_wreg(base, reg_size, spill_size);
 453
 454        return spill;
 455}
 456
 457/*
 458 * Configure the 6 FIFO's that are used by the network accelarator to
 459 * communicate with the rest of the XLx device. 4 of the FIFO's are for
 460 * packets from NA --> cpu (called Class FIFO's) and 2 are for feeding
 461 * the NA with free descriptors.
 462 */
 463static void xlr_config_fifo_spill_area(struct xlr_net_priv *priv)
 464{
 465        priv->frin_spill = xlr_config_spill(priv,
 466                        R_REG_FRIN_SPILL_MEM_START_0,
 467                        R_REG_FRIN_SPILL_MEM_START_1,
 468                        R_REG_FRIN_SPILL_MEM_SIZE,
 469                        MAX_FRIN_SPILL *
 470                        sizeof(u64));
 471        priv->frout_spill = xlr_config_spill(priv,
 472                        R_FROUT_SPILL_MEM_START_0,
 473                        R_FROUT_SPILL_MEM_START_1,
 474                        R_FROUT_SPILL_MEM_SIZE,
 475                        MAX_FROUT_SPILL *
 476                        sizeof(u64));
 477        priv->class_0_spill = xlr_config_spill(priv,
 478                        R_CLASS0_SPILL_MEM_START_0,
 479                        R_CLASS0_SPILL_MEM_START_1,
 480                        R_CLASS0_SPILL_MEM_SIZE,
 481                        MAX_CLASS_0_SPILL *
 482                        sizeof(u64));
 483        priv->class_1_spill = xlr_config_spill(priv,
 484                        R_CLASS1_SPILL_MEM_START_0,
 485                        R_CLASS1_SPILL_MEM_START_1,
 486                        R_CLASS1_SPILL_MEM_SIZE,
 487                        MAX_CLASS_1_SPILL *
 488                        sizeof(u64));
 489        priv->class_2_spill = xlr_config_spill(priv,
 490                        R_CLASS2_SPILL_MEM_START_0,
 491                        R_CLASS2_SPILL_MEM_START_1,
 492                        R_CLASS2_SPILL_MEM_SIZE,
 493                        MAX_CLASS_2_SPILL *
 494                        sizeof(u64));
 495        priv->class_3_spill = xlr_config_spill(priv,
 496                        R_CLASS3_SPILL_MEM_START_0,
 497                        R_CLASS3_SPILL_MEM_START_1,
 498                        R_CLASS3_SPILL_MEM_SIZE,
 499                        MAX_CLASS_3_SPILL *
 500                        sizeof(u64));
 501}
 502
 503/* Configure PDE to Round-Robin distribution of packets to the
 504 * available cpu */
 505static void xlr_config_pde(struct xlr_net_priv *priv)
 506{
 507        int i = 0;
 508        u64 bkt_map = 0;
 509
 510        /* Each core has 8 buckets(station) */
 511        for (i = 0; i < hweight32(priv->nd->cpu_mask); i++)
 512                bkt_map |= (0xff << (i * 8));
 513
 514        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_0, (bkt_map & 0xffffffff));
 515        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_0 + 1,
 516                        ((bkt_map >> 32) & 0xffffffff));
 517
 518        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_1, (bkt_map & 0xffffffff));
 519        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_1 + 1,
 520                        ((bkt_map >> 32) & 0xffffffff));
 521
 522        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_2, (bkt_map & 0xffffffff));
 523        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_2 + 1,
 524                        ((bkt_map >> 32) & 0xffffffff));
 525
 526        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_3, (bkt_map & 0xffffffff));
 527        xlr_nae_wreg(priv->base_addr, R_PDE_CLASS_3 + 1,
 528                        ((bkt_map >> 32) & 0xffffffff));
 529}
 530
 531/* Setup the Message ring credits, bucket size and other
 532 * common configuration */
 533static void xlr_config_common(struct xlr_net_priv *priv)
 534{
 535        struct xlr_fmn_info *gmac = priv->nd->gmac_fmn_info;
 536        int start_stn_id = gmac->start_stn_id;
 537        int end_stn_id = gmac->end_stn_id;
 538        int *bucket_size = priv->nd->bucket_size;
 539        int i, j;
 540
 541        /* Setting non-core MsgBktSize(0x321 - 0x325) */
 542        for (i = start_stn_id; i <= end_stn_id; i++) {
 543                xlr_nae_wreg(priv->base_addr,
 544                                R_GMAC_RFR0_BUCKET_SIZE + i - start_stn_id,
 545                                bucket_size[i]);
 546        }
 547
 548        /* Setting non-core Credit counter register
 549         * Distributing Gmac's credit to CPU's*/
 550        for (i = 0; i < 8; i++) {
 551                for (j = 0; j < 8; j++)
 552                        xlr_nae_wreg(priv->base_addr,
 553                                        (R_CC_CPU0_0 + (i * 8)) + j,
 554                                        gmac->credit_config[(i * 8) + j]);
 555        }
 556
 557        xlr_nae_wreg(priv->base_addr, R_MSG_TX_THRESHOLD, 3);
 558        xlr_nae_wreg(priv->base_addr, R_DMACR0, 0xffffffff);
 559        xlr_nae_wreg(priv->base_addr, R_DMACR1, 0xffffffff);
 560        xlr_nae_wreg(priv->base_addr, R_DMACR2, 0xffffffff);
 561        xlr_nae_wreg(priv->base_addr, R_DMACR3, 0xffffffff);
 562        xlr_nae_wreg(priv->base_addr, R_FREEQCARVE, 0);
 563
 564        xlr_net_fill_rx_ring(priv->ndev);
 565        nlm_register_fmn_handler(start_stn_id, end_stn_id, xlr_net_fmn_handler,
 566                                        NULL);
 567}
 568
 569static void xlr_config_translate_table(struct xlr_net_priv *priv)
 570{
 571        u32 cpu_mask;
 572        u32 val;
 573        int bkts[32]; /* one bucket is assumed for each cpu */
 574        int b1, b2, c1, c2, i, j, k;
 575        int use_bkt;
 576
 577        use_bkt = 0;
 578        cpu_mask = priv->nd->cpu_mask;
 579
 580        pr_info("Using %s-based distribution\n",
 581                        (use_bkt) ? "bucket" : "class");
 582        j = 0;
 583        for (i = 0; i < 32; i++) {
 584                if ((1 << i) & cpu_mask) {
 585                        /* for each cpu, mark the 4+threadid bucket */
 586                        bkts[j] = ((i / 4) * 8) + (i % 4);
 587                        j++;
 588                }
 589        }
 590
 591        /*configure the 128 * 9 Translation table to send to available buckets*/
 592        k = 0;
 593        c1 = 3;
 594        c2 = 0;
 595        for (i = 0; i < 64; i++) {
 596                /* On use_bkt set the b0, b1 are used, else
 597                 * the 4 classes are used, here implemented
 598                 * a logic to distribute the packets to the
 599                 * buckets equally or based on the class
 600                 */
 601                c1 = (c1 + 1) & 3;
 602                c2 = (c1 + 1) & 3;
 603                b1 = bkts[k];
 604                k = (k + 1) % j;
 605                b2 = bkts[k];
 606                k = (k + 1) % j;
 607                val = ((c1 << 23) | (b1 << 17) | (use_bkt << 16) |
 608                                (c2 << 7) | (b2 << 1) | (use_bkt << 0));
 609
 610                val = ((c1 << 23) | (b1 << 17) | (use_bkt << 16) |
 611                                (c2 << 7) | (b2 << 1) | (use_bkt << 0));
 612                dev_dbg(&priv->ndev->dev, "Table[%d] b1=%d b2=%d c1=%d c2=%d\n",
 613                                i, b1, b2, c1, c2);
 614                xlr_nae_wreg(priv->base_addr, R_TRANSLATETABLE + i, val);
 615                c1 = c2;
 616        }
 617}
 618
 619static void xlr_config_parser(struct xlr_net_priv *priv)
 620{
 621        u32 val;
 622
 623        /* Mark it as ETHERNET type */
 624        xlr_nae_wreg(priv->base_addr, R_L2TYPE_0, 0x01);
 625
 626        /* Use 7bit CRChash for flow classification with 127 as CRC polynomial*/
 627        xlr_nae_wreg(priv->base_addr, R_PARSERCONFIGREG,
 628                        ((0x7f << 8) | (1 << 1)));
 629
 630        /* configure the parser : L2 Type is configured in the bootloader */
 631        /* extract IP: src, dest protocol */
 632        xlr_nae_wreg(priv->base_addr, R_L3CTABLE,
 633                        (9 << 20) | (1 << 19) | (1 << 18) | (0x01 << 16) |
 634                        (0x0800 << 0));
 635        xlr_nae_wreg(priv->base_addr, R_L3CTABLE + 1,
 636                        (9 << 25) | (1 << 21) | (12 << 14) | (4 << 10) |
 637                        (16 << 4) | 4);
 638
 639        /* Configure to extract SRC port and Dest port for TCP and UDP pkts */
 640        xlr_nae_wreg(priv->base_addr, R_L4CTABLE, 6);
 641        xlr_nae_wreg(priv->base_addr, R_L4CTABLE + 2, 17);
 642        val = ((0 << 21) | (2 << 17) | (2 << 11) | (2 << 7));
 643        xlr_nae_wreg(priv->base_addr, R_L4CTABLE + 1, val);
 644        xlr_nae_wreg(priv->base_addr, R_L4CTABLE + 3, val);
 645
 646        xlr_config_translate_table(priv);
 647}
 648
 649static int xlr_phy_write(u32 *base_addr, int phy_addr, int regnum, u16 val)
 650{
 651        unsigned long timeout, stoptime, checktime;
 652        int timedout;
 653
 654        /* 100ms timeout*/
 655        timeout = msecs_to_jiffies(100);
 656        stoptime = jiffies + timeout;
 657        timedout = 0;
 658
 659        xlr_nae_wreg(base_addr, R_MII_MGMT_ADDRESS, (phy_addr << 8) | regnum);
 660
 661        /* Write the data which starts the write cycle */
 662        xlr_nae_wreg(base_addr, R_MII_MGMT_WRITE_DATA, (u32) val);
 663
 664        /* poll for the read cycle to complete */
 665        while (!timedout) {
 666                checktime = jiffies;
 667                if (xlr_nae_rdreg(base_addr, R_MII_MGMT_INDICATORS) == 0)
 668                        break;
 669                timedout = time_after(checktime, stoptime);
 670        }
 671        if (timedout) {
 672                pr_info("Phy device write err: device busy");
 673                return -EBUSY;
 674        }
 675
 676        return 0;
 677}
 678
 679static int xlr_phy_read(u32 *base_addr, int phy_addr, int regnum)
 680{
 681        unsigned long timeout, stoptime, checktime;
 682        int timedout;
 683
 684        /* 100ms timeout*/
 685        timeout = msecs_to_jiffies(100);
 686        stoptime = jiffies + timeout;
 687        timedout = 0;
 688
 689        /* setup the phy reg to be used */
 690        xlr_nae_wreg(base_addr, R_MII_MGMT_ADDRESS,
 691                        (phy_addr << 8) | (regnum << 0));
 692
 693        /* Issue the read command */
 694        xlr_nae_wreg(base_addr, R_MII_MGMT_COMMAND,
 695                        (1 << O_MII_MGMT_COMMAND__rstat));
 696
 697
 698        /* poll for the read cycle to complete */
 699        while (!timedout) {
 700                checktime = jiffies;
 701                if (xlr_nae_rdreg(base_addr, R_MII_MGMT_INDICATORS) == 0)
 702                        break;
 703                timedout = time_after(checktime, stoptime);
 704        }
 705        if (timedout) {
 706                pr_info("Phy device read err: device busy");
 707                return -EBUSY;
 708        }
 709
 710        /* clear the read cycle */
 711        xlr_nae_wreg(base_addr, R_MII_MGMT_COMMAND, 0);
 712
 713        /* Read the data */
 714        return xlr_nae_rdreg(base_addr, R_MII_MGMT_STATUS);
 715}
 716
 717static int xlr_mii_write(struct mii_bus *bus, int phy_addr, int regnum, u16 val)
 718{
 719        struct xlr_net_priv *priv = bus->priv;
 720        int ret;
 721
 722        ret = xlr_phy_write(priv->mii_addr, phy_addr, regnum, val);
 723        dev_dbg(&priv->ndev->dev, "mii_write phy %d : %d <- %x [%x]\n",
 724                        phy_addr, regnum, val, ret);
 725        return ret;
 726}
 727
 728static int xlr_mii_read(struct mii_bus *bus, int phy_addr, int regnum)
 729{
 730        struct xlr_net_priv *priv = bus->priv;
 731        int ret;
 732
 733        ret =  xlr_phy_read(priv->mii_addr, phy_addr, regnum);
 734        dev_dbg(&priv->ndev->dev, "mii_read phy %d : %d [%x]\n",
 735                        phy_addr, regnum, ret);
 736        return ret;
 737}
 738
 739/* XLR ports are RGMII. XLS ports are SGMII mostly except the port0,
 740 * which can be configured either SGMII or RGMII, considered SGMII
 741 * by default, if board setup to RGMII the port_type need to set
 742 * accordingly.Serdes and PCS layer need to configured for SGMII
 743 */
 744static void xlr_sgmii_init(struct xlr_net_priv *priv)
 745{
 746        int phy;
 747
 748        xlr_phy_write(priv->serdes_addr, 26, 0, 0x6DB0);
 749        xlr_phy_write(priv->serdes_addr, 26, 1, 0xFFFF);
 750        xlr_phy_write(priv->serdes_addr, 26, 2, 0xB6D0);
 751        xlr_phy_write(priv->serdes_addr, 26, 3, 0x00FF);
 752        xlr_phy_write(priv->serdes_addr, 26, 4, 0x0000);
 753        xlr_phy_write(priv->serdes_addr, 26, 5, 0x0000);
 754        xlr_phy_write(priv->serdes_addr, 26, 6, 0x0005);
 755        xlr_phy_write(priv->serdes_addr, 26, 7, 0x0001);
 756        xlr_phy_write(priv->serdes_addr, 26, 8, 0x0000);
 757        xlr_phy_write(priv->serdes_addr, 26, 9, 0x0000);
 758        xlr_phy_write(priv->serdes_addr, 26, 10, 0x0000);
 759
 760        /* program  GPIO values for serdes init parameters */
 761        xlr_nae_wreg(priv->gpio_addr, 0x20, 0x7e6802);
 762        xlr_nae_wreg(priv->gpio_addr, 0x10, 0x7104);
 763
 764        xlr_nae_wreg(priv->gpio_addr, 0x22, 0x7e6802);
 765        xlr_nae_wreg(priv->gpio_addr, 0x21, 0x7104);
 766
 767        /* enable autoneg - more magic */
 768        phy = priv->port_id % 4 + 27;
 769        xlr_phy_write(priv->pcs_addr, phy, 0, 0x1000);
 770        xlr_phy_write(priv->pcs_addr, phy, 0, 0x0200);
 771}
 772
 773void xlr_set_gmac_speed(struct xlr_net_priv *priv)
 774{
 775        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 776        int speed;
 777
 778        if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
 779                xlr_sgmii_init(priv);
 780
 781        if (phydev->speed != priv->phy_speed) {
 782                pr_info("change %d to %d\n", priv->phy_speed, phydev->speed);
 783                speed = phydev->speed;
 784                if (speed == SPEED_1000) {
 785                        /* Set interface to Byte mode */
 786                        xlr_nae_wreg(priv->base_addr, R_MAC_CONFIG_2, 0x7217);
 787                        priv->phy_speed = speed;
 788                } else if (speed == SPEED_100 || speed == SPEED_10) {
 789                        /* Set interface to Nibble mode */
 790                        xlr_nae_wreg(priv->base_addr, R_MAC_CONFIG_2, 0x7117);
 791                        priv->phy_speed = speed;
 792                }
 793                /* Set SGMII speed in Interface controll reg */
 794                if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
 795                        if (speed == SPEED_10)
 796                                xlr_nae_wreg(priv->base_addr,
 797                                        R_INTERFACE_CONTROL, SGMII_SPEED_10);
 798                        if (speed == SPEED_100)
 799                                xlr_nae_wreg(priv->base_addr,
 800                                        R_INTERFACE_CONTROL, SGMII_SPEED_100);
 801                        if (speed == SPEED_1000)
 802                                xlr_nae_wreg(priv->base_addr,
 803                                        R_INTERFACE_CONTROL, SGMII_SPEED_1000);
 804                }
 805                if (speed == SPEED_10)
 806                        xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x2);
 807                if (speed == SPEED_100)
 808                        xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x1);
 809                if (speed == SPEED_1000)
 810                        xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x0);
 811        }
 812        pr_info("gmac%d : %dMbps\n", priv->port_id, priv->phy_speed);
 813}
 814
 815static void xlr_gmac_link_adjust(struct net_device *ndev)
 816{
 817        struct xlr_net_priv *priv = netdev_priv(ndev);
 818        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 819        u32 intreg;
 820
 821        intreg = xlr_nae_rdreg(priv->base_addr, R_INTREG);
 822        if (phydev->link) {
 823                if (phydev->speed != priv->phy_speed) {
 824                        pr_info("gmac%d : Link up\n", priv->port_id);
 825                        xlr_set_gmac_speed(priv);
 826                }
 827        } else {
 828                pr_info("gmac%d : Link down\n", priv->port_id);
 829                xlr_set_gmac_speed(priv);
 830        }
 831}
 832
 833static int xlr_mii_probe(struct xlr_net_priv *priv)
 834{
 835        struct phy_device *phydev = priv->mii_bus->phy_map[priv->phy_addr];
 836
 837        if (!phydev) {
 838                pr_err("no PHY found on phy_addr %d\n", priv->phy_addr);
 839                return -ENODEV;
 840        }
 841
 842        /* Attach MAC to PHY */
 843        phydev = phy_connect(priv->ndev, dev_name(&phydev->dev),
 844                        &xlr_gmac_link_adjust, priv->nd->phy_interface);
 845
 846        if (IS_ERR(phydev)) {
 847                pr_err("could not attach PHY\n");
 848                return PTR_ERR(phydev);
 849        }
 850        phydev->supported &= (ADVERTISED_10baseT_Full
 851                                | ADVERTISED_10baseT_Half
 852                                | ADVERTISED_100baseT_Full
 853                                | ADVERTISED_100baseT_Half
 854                                | ADVERTISED_1000baseT_Full
 855                                | ADVERTISED_Autoneg
 856                                | ADVERTISED_MII);
 857
 858        phydev->advertising = phydev->supported;
 859        pr_info("attached PHY driver [%s] (mii_bus:phy_addr=%s\n",
 860                phydev->drv->name, dev_name(&phydev->dev));
 861        return 0;
 862}
 863
 864static int xlr_setup_mdio(struct xlr_net_priv *priv,
 865                struct platform_device *pdev)
 866{
 867        int err;
 868
 869        priv->phy_addr = priv->nd->phy_addr;
 870        priv->mii_bus = mdiobus_alloc();
 871        if (!priv->mii_bus) {
 872                pr_err("mdiobus alloc failed\n");
 873                return -ENOMEM;
 874        }
 875
 876        priv->mii_bus->priv = priv;
 877        priv->mii_bus->name = "xlr-mdio";
 878        snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d",
 879                        priv->mii_bus->name, priv->port_id);
 880        priv->mii_bus->read = xlr_mii_read;
 881        priv->mii_bus->write = xlr_mii_write;
 882        priv->mii_bus->parent = &pdev->dev;
 883        priv->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
 884        priv->mii_bus->irq[priv->phy_addr] = priv->ndev->irq;
 885
 886        /* Scan only the enabled address */
 887        priv->mii_bus->phy_mask = ~(1 << priv->phy_addr);
 888
 889        /* setting clock divisor to 54 */
 890        xlr_nae_wreg(priv->base_addr, R_MII_MGMT_CONFIG, 0x7);
 891
 892        err = mdiobus_register(priv->mii_bus);
 893        if (err) {
 894                mdiobus_free(priv->mii_bus);
 895                pr_err("mdio bus registration failed\n");
 896                return err;
 897        }
 898
 899        pr_info("Registerd mdio bus id : %s\n", priv->mii_bus->id);
 900        err = xlr_mii_probe(priv);
 901        if (err) {
 902                mdiobus_free(priv->mii_bus);
 903                return err;
 904        }
 905        return 0;
 906}
 907
 908static void xlr_port_enable(struct xlr_net_priv *priv)
 909{
 910        u32 prid = (read_c0_prid() & 0xf000);
 911
 912        /* Setup MAC_CONFIG reg if (xls & rgmii) */
 913        if ((prid == 0x8000 || prid == 0x4000 || prid == 0xc000) &&
 914                        priv->nd->phy_interface == PHY_INTERFACE_MODE_RGMII)
 915                xlr_reg_update(priv->base_addr, R_RX_CONTROL,
 916                        (1 << O_RX_CONTROL__RGMII), (1 << O_RX_CONTROL__RGMII));
 917
 918        /* Rx Tx enable */
 919        xlr_reg_update(priv->base_addr, R_MAC_CONFIG_1,
 920                ((1 << O_MAC_CONFIG_1__rxen) | (1 << O_MAC_CONFIG_1__txen) |
 921                (1 << O_MAC_CONFIG_1__rxfc) | (1 << O_MAC_CONFIG_1__txfc)),
 922                ((1 << O_MAC_CONFIG_1__rxen) | (1 << O_MAC_CONFIG_1__txen) |
 923                (1 << O_MAC_CONFIG_1__rxfc) | (1 << O_MAC_CONFIG_1__txfc)));
 924
 925        /* Setup tx control reg */
 926        xlr_reg_update(priv->base_addr, R_TX_CONTROL,
 927                ((1 << O_TX_CONTROL__TxEnable) |
 928                (512 << O_TX_CONTROL__TxThreshold)), 0x3fff);
 929
 930        /* Setup rx control reg */
 931        xlr_reg_update(priv->base_addr, R_RX_CONTROL,
 932                1 << O_RX_CONTROL__RxEnable, 1 << O_RX_CONTROL__RxEnable);
 933}
 934
 935static void xlr_port_disable(struct xlr_net_priv *priv)
 936{
 937        /* Setup MAC_CONFIG reg */
 938        /* Rx Tx disable*/
 939        xlr_reg_update(priv->base_addr, R_MAC_CONFIG_1,
 940                ((1 << O_MAC_CONFIG_1__rxen) | (1 << O_MAC_CONFIG_1__txen) |
 941                (1 << O_MAC_CONFIG_1__rxfc) | (1 << O_MAC_CONFIG_1__txfc)),
 942                0x0);
 943
 944        /* Setup tx control reg */
 945        xlr_reg_update(priv->base_addr, R_TX_CONTROL,
 946                ((1 << O_TX_CONTROL__TxEnable) |
 947                (512 << O_TX_CONTROL__TxThreshold)), 0);
 948
 949        /* Setup rx control reg */
 950        xlr_reg_update(priv->base_addr, R_RX_CONTROL,
 951                1 << O_RX_CONTROL__RxEnable, 0);
 952}
 953
 954/* Initialization of gmac */
 955static int xlr_gmac_init(struct xlr_net_priv *priv,
 956                struct platform_device *pdev)
 957{
 958        int ret;
 959
 960        pr_info("Initializing the gmac%d\n", priv->port_id);
 961
 962        xlr_port_disable(priv);
 963        xlr_nae_wreg(priv->base_addr, R_DESC_PACK_CTRL,
 964                        (1 << O_DESC_PACK_CTRL__MaxEntry)
 965                        | (BYTE_OFFSET << O_DESC_PACK_CTRL__ByteOffset)
 966                        | (1600 << O_DESC_PACK_CTRL__RegularSize));
 967
 968        ret = xlr_setup_mdio(priv, pdev);
 969        if (ret)
 970                return ret;
 971        xlr_port_enable(priv);
 972
 973        /* Enable Full-duplex/1000Mbps/CRC */
 974        xlr_nae_wreg(priv->base_addr, R_MAC_CONFIG_2, 0x7217);
 975        /* speed 2.5Mhz */
 976        xlr_nae_wreg(priv->base_addr, R_CORECONTROL, 0x02);
 977        /* Setup Interrupt mask reg */
 978        xlr_nae_wreg(priv->base_addr, R_INTMASK,
 979                (1 << O_INTMASK__TxIllegal)     |
 980                (1 << O_INTMASK__MDInt)         |
 981                (1 << O_INTMASK__TxFetchError)  |
 982                (1 << O_INTMASK__P2PSpillEcc)   |
 983                (1 << O_INTMASK__TagFull)       |
 984                (1 << O_INTMASK__Underrun)      |
 985                (1 << O_INTMASK__Abort)
 986                );
 987
 988        /* Clear all stats */
 989        xlr_reg_update(priv->base_addr, R_STATCTRL,
 990                0, 1 << O_STATCTRL__ClrCnt);
 991        xlr_reg_update(priv->base_addr, R_STATCTRL,
 992                1 << O_STATCTRL__ClrCnt, 1 << O_STATCTRL__ClrCnt);
 993        return 0;
 994}
 995
 996static int xlr_net_probe(struct platform_device *pdev)
 997{
 998        struct xlr_net_priv *priv = NULL;
 999        struct net_device *ndev;
1000        struct resource *res;
1001        int mac, err;
1002
1003        mac = pdev->id;
1004        ndev = alloc_etherdev_mq(sizeof(struct xlr_net_priv), 32);
1005        if (!ndev) {
1006                pr_err("Allocation of Ethernet device failed\n");
1007                return -ENOMEM;
1008        }
1009
1010        priv = netdev_priv(ndev);
1011        priv->pdev = pdev;
1012        priv->ndev = ndev;
1013        priv->port_id = mac;
1014        priv->nd = (struct xlr_net_data *)pdev->dev.platform_data;
1015
1016        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1017        if (res == NULL) {
1018                pr_err("No memory resource for MAC %d\n", mac);
1019                err = -ENODEV;
1020                goto err_gmac;
1021        }
1022
1023        ndev->base_addr = (unsigned long) devm_request_and_ioremap
1024                (&pdev->dev, res);
1025        if (!ndev->base_addr) {
1026                dev_err(&pdev->dev,
1027                                "devm_request_and_ioremap failed\n");
1028                return -EBUSY;
1029        }
1030
1031        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1032        if (res == NULL) {
1033                pr_err("No irq resource for MAC %d\n", mac);
1034                err = -ENODEV;
1035                goto err_gmac;
1036        }
1037        ndev->irq = res->start;
1038
1039        priv->mii_addr = priv->nd->mii_addr;
1040        priv->serdes_addr = priv->nd->serdes_addr;
1041        priv->pcs_addr = priv->nd->pcs_addr;
1042        priv->gpio_addr = priv->nd->gpio_addr;
1043        priv->base_addr = (u32 *) ndev->base_addr;
1044
1045        mac_to_ndev[mac] = ndev;
1046        ndev->netdev_ops = &xlr_netdev_ops;
1047        ndev->watchdog_timeo = HZ;
1048
1049        /* Setup Mac address and Rx mode */
1050        eth_hw_addr_random(ndev);
1051        xlr_hw_set_mac_addr(ndev);
1052        xlr_set_rx_mode(ndev);
1053
1054        priv->num_rx_desc += MAX_NUM_DESC_SPILL;
1055        SET_ETHTOOL_OPS(ndev, &xlr_ethtool_ops);
1056        SET_NETDEV_DEV(ndev, &pdev->dev);
1057
1058        /* Common registers, do one time initialization */
1059        if (mac == 0 || mac == 4) {
1060                xlr_config_fifo_spill_area(priv);
1061                /* Configure PDE to Round-Robin pkt distribution */
1062                xlr_config_pde(priv);
1063                xlr_config_parser(priv);
1064        }
1065        /* Call init with respect to port */
1066        if (strcmp(res->name, "gmac") == 0) {
1067                err = xlr_gmac_init(priv, pdev);
1068                if (err) {
1069                        pr_err("gmac%d init failed\n", mac);
1070                        goto err_gmac;
1071                }
1072        }
1073
1074        if (mac == 0 || mac == 4)
1075                xlr_config_common(priv);
1076
1077        err = register_netdev(ndev);
1078        if (err)
1079                goto err_netdev;
1080        platform_set_drvdata(pdev, priv);
1081        return 0;
1082
1083err_netdev:
1084        mdiobus_free(priv->mii_bus);
1085err_gmac:
1086        free_netdev(ndev);
1087        return err;
1088}
1089
1090static int xlr_net_remove(struct platform_device *pdev)
1091{
1092        struct xlr_net_priv *priv = platform_get_drvdata(pdev);
1093        unregister_netdev(priv->ndev);
1094        mdiobus_unregister(priv->mii_bus);
1095        mdiobus_free(priv->mii_bus);
1096        free_netdev(priv->ndev);
1097        return 0;
1098}
1099
1100static struct platform_driver xlr_net_driver = {
1101        .probe          = xlr_net_probe,
1102        .remove         = xlr_net_remove,
1103        .driver         = {
1104                .name   = "xlr-net",
1105                .owner  = THIS_MODULE,
1106        },
1107};
1108
1109module_platform_driver(xlr_net_driver);
1110
1111MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
1112MODULE_DESCRIPTION("Ethernet driver for Netlogic XLR/XLS");
1113MODULE_LICENSE("Dual BSD/GPL");
1114MODULE_ALIAS("platform:xlr-net");
1115