1
2
3
4comment "USB Host Controller Drivers"
5
6config USB_C67X00_HCD
7 tristate "Cypress C67x00 HCD support"
8 help
9 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
10 host/peripheral/OTG USB controllers.
11
12 Enable this option to support this chip in host controller mode.
13 If unsure, say N.
14
15 To compile this driver as a module, choose M here: the
16 module will be called c67x00.
17
18config USB_XHCI_HCD
19 tristate "xHCI HCD (USB 3.0) support"
20 depends on USB_ARCH_HAS_XHCI
21 ---help---
22 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
23 "SuperSpeed" host controller hardware.
24
25 To compile this driver as a module, choose M here: the
26 module will be called xhci-hcd.
27
28if USB_XHCI_HCD
29
30config USB_XHCI_PLATFORM
31 tristate
32
33config USB_XHCI_HCD_DEBUGGING
34 bool "Debugging for the xHCI host controller"
35 ---help---
36 Say 'Y' to turn on debugging for the xHCI host controller driver.
37 This will spew debugging output, even in interrupt context.
38 This should only be used for debugging xHCI driver bugs.
39
40 If unsure, say N.
41
42endif
43
44config USB_EHCI_HCD
45 tristate "EHCI HCD (USB 2.0) support"
46 depends on USB_ARCH_HAS_EHCI
47 ---help---
48 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
49 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
50 If your USB host controller supports USB 2.0, you will likely want to
51 configure this Host Controller Driver.
52
53 EHCI controllers are packaged with "companion" host controllers (OHCI
54 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
55 will connect to EHCI if the device is high speed, otherwise they
56 connect to a companion controller. If you configure EHCI, you should
57 probably configure the OHCI (for NEC and some other vendors) USB Host
58 Controller Driver or UHCI (for Via motherboards) Host Controller
59 Driver too.
60
61 You may want to read <file:Documentation/usb/ehci.txt>.
62
63 To compile this driver as a module, choose M here: the
64 module will be called ehci-hcd.
65
66config USB_EHCI_ROOT_HUB_TT
67 bool "Root Hub Transaction Translators"
68 depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
69 ---help---
70 Some EHCI chips have vendor-specific extensions to integrate
71 transaction translators, so that no OHCI or UHCI companion
72 controller is needed. It's safe to say "y" even if your
73 controller doesn't support this feature.
74
75 This supports the EHCI implementation that's originally
76 from ARC, and has since changed hands a few times.
77
78config USB_EHCI_TT_NEWSCHED
79 bool "Improved Transaction Translator scheduling"
80 depends on USB_EHCI_HCD || USB_CHIPIDEA_HOST
81 default y
82 ---help---
83 This changes the periodic scheduling code to fill more of the low
84 and full speed bandwidth available from the Transaction Translator
85 (TT) in USB 2.0 hubs. Without this, only one transfer will be
86 issued in each microframe, significantly reducing the number of
87 periodic low/fullspeed transfers possible.
88
89 If you have multiple periodic low/fullspeed devices connected to a
90 highspeed USB hub which is connected to a highspeed USB Host
91 Controller, and some of those devices will not work correctly
92 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
93 you have only one such device and it doesn't work, you could try
94 saying N.
95
96 If unsure, say Y.
97
98config USB_FSL_MPH_DR_OF
99 tristate
100
101if USB_EHCI_HCD
102
103config USB_EHCI_PCI
104 tristate
105 depends on PCI
106 default y
107
108config USB_EHCI_HCD_PMC_MSP
109 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
110 depends on MSP_HAS_USB
111 default n
112 select USB_EHCI_BIG_ENDIAN_DESC
113 select USB_EHCI_BIG_ENDIAN_MMIO
114 ---help---
115 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
116 If unsure, say N.
117
118config USB_EHCI_BIG_ENDIAN_MMIO
119 bool
120
121config USB_EHCI_BIG_ENDIAN_DESC
122 bool
123
124config XPS_USB_HCD_XILINX
125 bool "Use Xilinx usb host EHCI controller core"
126 depends on (PPC32 || MICROBLAZE)
127 select USB_EHCI_BIG_ENDIAN_DESC
128 select USB_EHCI_BIG_ENDIAN_MMIO
129 ---help---
130 Xilinx xps USB host controller core is EHCI compilant and has
131 transaction translator built-in. It can be configured to either
132 support both high speed and full speed devices, or high speed
133 devices only.
134
135config USB_EHCI_FSL
136 bool "Support for Freescale PPC on-chip EHCI USB controller"
137 depends on FSL_SOC
138 select USB_EHCI_ROOT_HUB_TT
139 select USB_FSL_MPH_DR_OF if OF
140 ---help---
141 Variation of ARC USB block used in some Freescale chips.
142
143config USB_EHCI_MXC
144 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
145 depends on ARCH_MXC
146 select USB_EHCI_ROOT_HUB_TT
147 ---help---
148 Variation of ARC USB block used in some Freescale chips.
149
150config USB_EHCI_HCD_OMAP
151 tristate "EHCI support for OMAP3 and later chips"
152 depends on ARCH_OMAP
153 default y
154 ---help---
155 Enables support for the on-chip EHCI controller on
156 OMAP3 and later chips.
157 If your system uses a PHY on the USB port, you will need to
158 enable USB_PHY and the appropriate PHY driver as well. Most
159 boards need the NOP_USB_XCEIV PHY driver.
160
161config USB_EHCI_HCD_ORION
162 tristate "Support for Marvell EBU on-chip EHCI USB controller"
163 depends on USB_EHCI_HCD && PLAT_ORION
164 default y
165 ---help---
166 Enables support for the on-chip EHCI controller on Marvell's
167 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
168 Armada 370. This is different from the EHCI implementation
169 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
170 Marvell PXA/MMP USB controller" for those.
171
172config USB_EHCI_HCD_SPEAR
173 tristate "Support for ST SPEAr on-chip EHCI USB controller"
174 depends on USB_EHCI_HCD && PLAT_SPEAR
175 default y
176 ---help---
177 Enables support for the on-chip EHCI controller on
178 ST SPEAr chips.
179
180config USB_EHCI_HCD_AT91
181 tristate "Support for Atmel on-chip EHCI USB controller"
182 depends on USB_EHCI_HCD && ARCH_AT91
183 default y
184 ---help---
185 Enables support for the on-chip EHCI controller on
186 Atmel chips.
187
188config USB_EHCI_MSM
189 tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
190 depends on ARCH_MSM
191 depends on USB_PHY
192 select USB_EHCI_ROOT_HUB_TT
193 select USB_MSM_OTG
194 ---help---
195 Enables support for the USB Host controller present on the
196 Qualcomm chipsets. Root Hub has inbuilt TT.
197 This driver depends on OTG driver for PHY initialization,
198 clock management, powering up VBUS, and power management.
199 This driver is not supported on boards like trout which
200 has an external PHY.
201
202config USB_EHCI_TEGRA
203 boolean "NVIDIA Tegra HCD support"
204 depends on ARCH_TEGRA
205 select USB_EHCI_ROOT_HUB_TT
206 select USB_PHY
207 help
208 This driver enables support for the internal USB Host Controllers
209 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
210
211config USB_EHCI_HCD_PPC_OF
212 bool "EHCI support for PPC USB controller on OF platform bus"
213 depends on PPC_OF
214 default y
215 ---help---
216 Enables support for the USB controller present on the PowerPC
217 OpenFirmware platform bus.
218
219config USB_EHCI_SH
220 bool "EHCI support for SuperH USB controller"
221 depends on SUPERH
222 ---help---
223 Enables support for the on-chip EHCI controller on the SuperH.
224 If you use the PCI EHCI controller, this option is not necessary.
225
226config USB_EHCI_S5P
227 tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
228 depends on PLAT_S5P
229 help
230 Enable support for the Samsung S5Pxxxx and Exynos3/4/5 SOC's
231 on-chip EHCI controller.
232
233config USB_EHCI_MV
234 bool "EHCI support for Marvell PXA/MMP USB controller"
235 depends on (ARCH_PXA || ARCH_MMP)
236 select USB_EHCI_ROOT_HUB_TT
237 ---help---
238 Enables support for Marvell (including PXA and MMP series) on-chip
239 USB SPH and OTG controller. SPH is a single port host, and it can
240 only be EHCI host. OTG is controller that can switch to host mode.
241 Note that this driver will not work on Marvell's other EHCI
242 controller used by the EBU-type SoCs including Orion, Kirkwood,
243 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
244 on-chip EHCI USB controller" for those.
245
246config USB_W90X900_EHCI
247 bool "W90X900(W90P910) EHCI support"
248 depends on ARCH_W90X900
249 ---help---
250 Enables support for the W90X900 USB controller
251
252config USB_CNS3XXX_EHCI
253 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
254 depends on ARCH_CNS3XXX
255 select USB_EHCI_HCD_PLATFORM
256 ---help---
257 This option is deprecated now and the driver was removed, use
258 USB_EHCI_HCD_PLATFORM instead.
259
260 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
261 It is needed for high-speed (480Mbit/sec) USB 2.0 device
262 support.
263
264config USB_EHCI_ATH79
265 bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
266 depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
267 select USB_EHCI_ROOT_HUB_TT
268 select USB_EHCI_HCD_PLATFORM
269 default y
270 ---help---
271 This option is deprecated now and the driver was removed, use
272 USB_EHCI_HCD_PLATFORM instead.
273
274 Enables support for the built-in EHCI controller present
275 on the Atheros AR7XXX/AR9XXX SoCs.
276
277config USB_EHCI_HCD_PLATFORM
278 tristate "Generic EHCI driver for a platform device"
279 default n
280 ---help---
281 Adds an EHCI host driver for a generic platform device, which
282 provides a memory space and an irq.
283
284 If unsure, say N.
285
286config USB_OCTEON_EHCI
287 bool "Octeon on-chip EHCI support"
288 depends on CPU_CAVIUM_OCTEON
289 default n
290 select USB_EHCI_BIG_ENDIAN_MMIO
291 help
292 Enable support for the Octeon II SOC's on-chip EHCI
293 controller. It is needed for high-speed (480Mbit/sec)
294 USB 2.0 device support. All CN6XXX based chips with USB are
295 supported.
296
297endif
298
299config USB_OXU210HP_HCD
300 tristate "OXU210HP HCD support"
301 depends on GENERIC_HARDIRQS
302 ---help---
303 The OXU210HP is an USB host/OTG/device controller. Enable this
304 option if your board has this chip. If unsure, say N.
305
306 This driver does not support isochronous transfers and doesn't
307 implement OTG nor USB device controllers.
308
309 To compile this driver as a module, choose M here: the
310 module will be called oxu210hp-hcd.
311
312config USB_ISP116X_HCD
313 tristate "ISP116X HCD support"
314 ---help---
315 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
316 option if your board has this chip. If unsure, say N.
317
318 This driver does not support isochronous transfers.
319
320 To compile this driver as a module, choose M here: the
321 module will be called isp116x-hcd.
322
323config USB_ISP1760_HCD
324 tristate "ISP 1760 HCD support"
325 ---help---
326 The ISP1760 chip is a USB 2.0 host controller.
327
328 This driver does not support isochronous transfers or OTG.
329 This USB controller is usually attached to a non-DMA-Master
330 capable bus. NXP's eval kit brings this chip on PCI card
331 where the chip itself is behind a PLB to simulate such
332 a bus.
333
334 To compile this driver as a module, choose M here: the
335 module will be called isp1760.
336
337config USB_ISP1362_HCD
338 tristate "ISP1362 HCD support"
339 default N
340 ---help---
341 Supports the Philips ISP1362 chip as a host controller
342
343 This driver does not support isochronous transfers.
344
345 To compile this driver as a module, choose M here: the
346 module will be called isp1362-hcd.
347
348config USB_OHCI_HCD
349 tristate "OHCI HCD support"
350 depends on USB_ARCH_HAS_OHCI
351 select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
352 depends on USB_ISP1301 || !ARCH_LPC32XX
353 ---help---
354 The Open Host Controller Interface (OHCI) is a standard for accessing
355 USB 1.1 host controller hardware. It does more in hardware than Intel's
356 UHCI specification. If your USB host controller follows the OHCI spec,
357 say Y. On most non-x86 systems, and on x86 hardware that's not using a
358 USB controller from Intel or VIA, this is appropriate. If your host
359 controller doesn't use PCI, this is probably appropriate. For a PCI
360 based system where you're not sure, the "lspci -v" entry will list the
361 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
362
363 To compile this driver as a module, choose M here: the
364 module will be called ohci-hcd.
365
366if USB_OHCI_HCD
367
368config USB_OHCI_HCD_OMAP1
369 bool "OHCI support for OMAP1/2 chips"
370 depends on ARCH_OMAP1
371 default y
372 ---help---
373 Enables support for the OHCI controller on OMAP1/2 chips.
374
375config USB_OHCI_HCD_OMAP3
376 bool "OHCI support for OMAP3 and later chips"
377 depends on (ARCH_OMAP3 || ARCH_OMAP4)
378 default y
379 ---help---
380 Enables support for the on-chip OHCI controller on
381 OMAP3 and later chips.
382
383config USB_OHCI_ATH79
384 bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
385 depends on (SOC_AR71XX || SOC_AR724X)
386 select USB_OHCI_HCD_PLATFORM
387 default y
388 help
389 This option is deprecated now and the driver was removed, use
390 USB_OHCI_HCD_PLATFORM instead.
391
392 Enables support for the built-in OHCI controller present on the
393 Atheros AR71XX/AR7240 SoCs.
394
395config USB_OHCI_HCD_PPC_OF_BE
396 bool "OHCI support for OF platform bus (big endian)"
397 depends on PPC_OF
398 select USB_OHCI_BIG_ENDIAN_DESC
399 select USB_OHCI_BIG_ENDIAN_MMIO
400 ---help---
401 Enables support for big-endian USB controllers present on the
402 OpenFirmware platform bus.
403
404config USB_OHCI_HCD_PPC_OF_LE
405 bool "OHCI support for OF platform bus (little endian)"
406 depends on PPC_OF
407 select USB_OHCI_LITTLE_ENDIAN
408 ---help---
409 Enables support for little-endian USB controllers present on the
410 OpenFirmware platform bus.
411
412config USB_OHCI_HCD_PPC_OF
413 bool
414 depends on PPC_OF
415 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
416
417config USB_OHCI_HCD_PCI
418 bool "OHCI support for PCI-bus USB controllers"
419 depends on PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
420 default y
421 select USB_OHCI_LITTLE_ENDIAN
422 ---help---
423 Enables support for PCI-bus plug-in USB controller cards.
424 If unsure, say Y.
425
426config USB_OHCI_HCD_SSB
427 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
428 depends on (SSB = y || SSB = USB_OHCI_HCD)
429 select USB_HCD_SSB
430 select USB_OHCI_HCD_PLATFORM
431 default n
432 ---help---
433 This option is deprecated now and the driver was removed, use
434 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
435
436 Support for the Sonics Silicon Backplane (SSB) attached
437 Broadcom USB OHCI core.
438
439 This device is present in some embedded devices with
440 Broadcom based SSB bus.
441
442 If unsure, say N.
443
444config USB_OHCI_SH
445 bool "OHCI support for SuperH USB controller (DEPRECATED)"
446 depends on SUPERH
447 select USB_OHCI_HCD_PLATFORM
448 ---help---
449 This option is deprecated now and the driver was removed, use
450 USB_OHCI_HCD_PLATFORM instead.
451
452 Enables support for the on-chip OHCI controller on the SuperH.
453 If you use the PCI OHCI controller, this option is not necessary.
454
455config USB_OHCI_EXYNOS
456 boolean "OHCI support for Samsung EXYNOS SoC Series"
457 depends on ARCH_EXYNOS
458 help
459 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
460
461config USB_CNS3XXX_OHCI
462 bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
463 depends on ARCH_CNS3XXX
464 select USB_OHCI_HCD_PLATFORM
465 ---help---
466 This option is deprecated now and the driver was removed, use
467 USB_OHCI_HCD_PLATFORM instead.
468
469 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
470 It is needed for low-speed USB 1.0 device support.
471
472config USB_OHCI_HCD_PLATFORM
473 bool "Generic OHCI driver for a platform device"
474 default n
475 ---help---
476 Adds an OHCI host driver for a generic platform device, which
477 provides a memory space and an irq.
478
479 If unsure, say N.
480
481config USB_OCTEON_OHCI
482 bool "Octeon on-chip OHCI support"
483 depends on CPU_CAVIUM_OCTEON
484 default USB_OCTEON_EHCI
485 select USB_OHCI_BIG_ENDIAN_MMIO
486 select USB_OHCI_LITTLE_ENDIAN
487 help
488 Enable support for the Octeon II SOC's on-chip OHCI
489 controller. It is needed for low-speed USB 1.0 device
490 support. All CN6XXX based chips with USB are supported.
491
492
493config USB_OHCI_BIG_ENDIAN_DESC
494 bool
495 default n
496
497config USB_OHCI_BIG_ENDIAN_MMIO
498 bool
499 default n
500
501config USB_OHCI_LITTLE_ENDIAN
502 bool
503 default n if STB03xxx || PPC_MPC52xx
504 default y
505
506endif
507
508config USB_UHCI_HCD
509 tristate "UHCI HCD (most Intel and VIA) support"
510 depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
511 ---help---
512 The Universal Host Controller Interface is a standard by Intel for
513 accessing the USB hardware in the PC (which is also called the USB
514 host controller). If your USB host controller conforms to this
515 standard, you may want to say Y, but see below. All recent boards
516 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
517 i810, i820) conform to this standard. Also all VIA PCI chipsets
518 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
519 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
520 If unsure, say Y.
521
522 To compile this driver as a module, choose M here: the
523 module will be called uhci-hcd.
524
525config USB_UHCI_SUPPORT_NON_PCI_HC
526 bool
527 default y if (SPARC_LEON || USB_UHCI_PLATFORM)
528
529config USB_UHCI_PLATFORM
530 bool
531 default y if ARCH_VT8500
532
533config USB_UHCI_BIG_ENDIAN_MMIO
534 bool
535 default y if SPARC_LEON
536
537config USB_UHCI_BIG_ENDIAN_DESC
538 bool
539 default y if SPARC_LEON
540
541config USB_FHCI_HCD
542 tristate "Freescale QE USB Host Controller support"
543 depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
544 select FSL_GTM
545 select QE_USB
546 help
547 This driver enables support for Freescale QE USB Host Controller
548 (as found on MPC8360 and MPC8323 processors), the driver supports
549 Full and Low Speed USB.
550
551config FHCI_DEBUG
552 bool "Freescale QE USB Host Controller debug support"
553 depends on USB_FHCI_HCD && DEBUG_FS
554 help
555 Say "y" to see some FHCI debug information and statistics
556 through debugfs.
557
558config USB_U132_HCD
559 tristate "Elan U132 Adapter Host Controller"
560 depends on USB_FTDI_ELAN
561 default M
562 help
563 The U132 adapter is a USB to CardBus adapter specifically designed
564 for PC cards that contain an OHCI host controller. Typical PC cards
565 are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
566 adapter will *NOT* work with PC cards that do not contain an OHCI
567 controller.
568
569 For those PC cards that contain multiple OHCI controllers only the
570 first one is used.
571
572 The driver consists of two modules, the "ftdi-elan" module is a
573 USB client driver that interfaces to the FTDI chip within ELAN's
574 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
575 controller driver that talks to the OHCI controller within the
576 CardBus cards that are inserted in the U132 adapter.
577
578 This driver has been tested with a CardBus OHCI USB adapter, and
579 worked with a USB PEN Drive inserted into the first USB port of
580 the PCCARD. A rather pointless thing to do, but useful for testing.
581
582 It is safe to say M here.
583
584 See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
585
586config USB_SL811_HCD
587 tristate "SL811HS HCD support"
588 help
589 The SL811HS is a single-port USB controller that supports either
590 host side or peripheral side roles. Enable this option if your
591 board has this chip, and you want to use it as a host controller.
592 If unsure, say N.
593
594 To compile this driver as a module, choose M here: the
595 module will be called sl811-hcd.
596
597config USB_SL811_HCD_ISO
598 bool "partial ISO support"
599 depends on USB_SL811_HCD
600 help
601 The driver doesn't support iso_frame_desc (yet), but for some simple
602 devices that just queue one ISO frame per URB, then ISO transfers
603 "should" work using the normal urb status fields.
604
605 If unsure, say N.
606
607config USB_SL811_CS
608 tristate "CF/PCMCIA support for SL811HS HCD"
609 depends on USB_SL811_HCD && PCMCIA
610 help
611 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
612 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
613
614 To compile this driver as a module, choose M here: the
615 module will be called "sl811_cs".
616
617config USB_R8A66597_HCD
618 tristate "R8A66597 HCD support"
619 help
620 The R8A66597 is a USB 2.0 host and peripheral controller.
621
622 Enable this option if your board has this chip, and you want
623 to use it as a host controller. If unsure, say N.
624
625 To compile this driver as a module, choose M here: the
626 module will be called r8a66597-hcd.
627
628config USB_RENESAS_USBHS_HCD
629 tristate "Renesas USBHS HCD support"
630 depends on USB_RENESAS_USBHS
631 help
632 The Renesas USBHS is a USB 2.0 host and peripheral controller.
633
634 Enable this option if your board has this chip, and you want
635 to use it as a host controller. If unsure, say N.
636
637 To compile this driver as a module, choose M here: the
638 module will be called renesas-usbhs.
639
640config USB_WHCI_HCD
641 tristate "Wireless USB Host Controller Interface (WHCI) driver"
642 depends on PCI && USB && UWB
643 select USB_WUSB
644 select UWB_WHCI
645 help
646 A driver for PCI-based Wireless USB Host Controllers that are
647 compliant with the WHCI specification.
648
649 To compile this driver a module, choose M here: the module
650 will be called "whci-hcd".
651
652config USB_HWA_HCD
653 tristate "Host Wire Adapter (HWA) driver"
654 depends on UWB
655 select USB_WUSB
656 select UWB_HWA
657 help
658 This driver enables you to connect Wireless USB devices to
659 your system using a Host Wire Adaptor USB dongle. This is an
660 UWB Radio Controller and WUSB Host Controller connected to
661 your machine via USB (specified in WUSB1.0).
662
663 To compile this driver a module, choose M here: the module
664 will be called "hwa-hc".
665
666config USB_IMX21_HCD
667 tristate "i.MX21 HCD support"
668 depends on ARM && ARCH_MXC
669 help
670 This driver enables support for the on-chip USB host in the
671 i.MX21 processor.
672
673 To compile this driver as a module, choose M here: the
674 module will be called "imx21-hcd".
675
676
677
678config USB_OCTEON2_COMMON
679 bool
680 default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI
681
682config USB_HCD_BCMA
683 tristate "BCMA usb host driver"
684 depends on BCMA
685 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
686 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
687 help
688 Enable support for the EHCI and OCHI host controller on an bcma bus.
689 It converts the bcma driver into two platform device drivers
690 for ehci and ohci.
691
692 If unsure, say N.
693
694config USB_HCD_SSB
695 tristate "SSB usb host driver"
696 depends on SSB
697 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
698 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
699 help
700 Enable support for the EHCI and OCHI host controller on an bcma bus.
701 It converts the bcma driver into two platform device drivers
702 for ehci and ohci.
703
704 If unsure, say N.
705
