/*
 * Copyright 2005-2009 MontaVista Software, Inc.
 * Copyright 2008,2012      Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
 * by Hunter Wu.
 * Power Management support by Dave Liu <daveliu@freescale.com>,
 * Jerry Huang <Chang-Ming.Huang@freescale.com> and
 * Anton Vorontsov <avorontsov@ru.mvista.com>.
 */

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>

#include "ehci-fsl.h"

/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */

/**
 * usb_hcd_fsl_probe - initialize FSL-based HCDs
 * @drvier: Driver to be used for this HCD
 * @pdev: USB Host Controller being probed
 * Context: !in_interrupt()
 *
 * Allocates basic resources for this USB host controller.
 *
 */
static int usb_hcd_fsl_probe(const struct hc_driver *driver,
                             struct platform_device *pdev)
{
        struct fsl_usb2_platform_data *pdata;
        struct usb_hcd *hcd;
        struct resource *res;
        int irq;
        int retval;

        pr_debug("initializing FSL-SOC USB Controller\n");

        /* Need platform data for setup */
        pdata = (struct fsl_usb2_platform_data *)pdev->dev.platform_data;
        if (!pdata) {
                dev_err(&pdev->dev,
                        "No platform data for %s.\n", dev_name(&pdev->dev));
                return -ENODEV;
        }

        /*
         * This is a host mode driver, verify that we're supposed to be
         * in host mode.
         */
        if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
              (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
              (pdata->operating_mode == FSL_USB2_DR_OTG))) {
                dev_err(&pdev->dev,
                        "Non Host Mode configured for %s. Wrong driver linked.\n",
                        dev_name(&pdev->dev));
                return -ENODEV;
        }

        res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
        if (!res) {
                dev_err(&pdev->dev,
                        "Found HC with no IRQ. Check %s setup!\n",
                        dev_name(&pdev->dev));
                return -ENODEV;
        }
        irq = res->start;

        hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
        if (!hcd) {
                retval = -ENOMEM;
                goto err1;
        }

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                dev_err(&pdev->dev,
                        "Found HC with no register addr. Check %s setup!\n",
                        dev_name(&pdev->dev));
                retval = -ENODEV;
                goto err2;
        }
        hcd->rsrc_start = res->start;
        hcd->rsrc_len = resource_size(res);
        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
                                driver->description)) {
                dev_dbg(&pdev->dev, "controller already in use\n");
                retval = -EBUSY;
                goto err2;
        }
        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);

        if (hcd->regs == NULL) {
                dev_dbg(&pdev->dev, "error mapping memory\n");
                retval = -EFAULT;
                goto err3;
        }

        pdata->regs = hcd->regs;

        if (pdata->power_budget)
                hcd->power_budget = pdata->power_budget;

        /*
         * do platform specific init: check the clock, grab/config pins, etc.
         */
        if (pdata->init && pdata->init(pdev)) {
                retval = -ENODEV;
                goto err4;
        }

        /* Enable USB controller, 83xx or 8536 */
        if (pdata->have_sysif_regs)
                setbits32(hcd->regs + FSL_SOC_USB_CTRL, 0x4);

        /* Don't need to set host mode here. It will be done by tdi_reset() */

        retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
        if (retval != 0)
                goto err4;

#ifdef CONFIG_USB_OTG
        if (pdata->operating_mode == FSL_USB2_DR_OTG) {
                struct ehci_hcd *ehci = hcd_to_ehci(hcd);

                hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
                dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, phy=0x%p\n",
                        hcd, ehci, hcd->phy);

                if (!IS_ERR_OR_NULL(hcd->phy)) {
                        retval = otg_set_host(hcd->phy->otg,
                                              &ehci_to_hcd(ehci)->self);
                        if (retval) {
                                usb_put_phy(hcd->phy);
                                goto err4;
                        }
                } else {
                        dev_err(&pdev->dev, "can't find phy\n");
                        retval = -ENODEV;
                        goto err4;
                }
        }
#endif
        return retval;

      err4:
        iounmap(hcd->regs);
      err3:
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
      err2:
        usb_put_hcd(hcd);
      err1:
        dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
        if (pdata->exit)
                pdata->exit(pdev);
        return retval;
}

/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */

/**
 * usb_hcd_fsl_remove - shutdown processing for FSL-based HCDs
 * @dev: USB Host Controller being removed
 * Context: !in_interrupt()
 *
 * Reverses the effect of usb_hcd_fsl_probe().
 *
 */
static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
                               struct platform_device *pdev)
{
        struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;

        if (!IS_ERR_OR_NULL(hcd->phy)) {
                otg_set_host(hcd->phy->otg, NULL);
                usb_put_phy(hcd->phy);
        }

        usb_remove_hcd(hcd);

        /*
         * do platform specific un-initialization:
         * release iomux pins, disable clock, etc.
         */
        if (pdata->exit)
                pdata->exit(pdev);
        iounmap(hcd->regs);
        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
        usb_put_hcd(hcd);
}

static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
                               enum fsl_usb2_phy_modes phy_mode,
                               unsigned int port_offset)
{
        u32 portsc;
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        void __iomem *non_ehci = hcd->regs;
        struct device *dev = hcd->self.controller;
        struct fsl_usb2_platform_data *pdata = dev->platform_data;

        if (pdata->controller_ver < 0) {
                dev_warn(hcd->self.controller, "Could not get controller version\n");
                return -ENODEV;
        }

        portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
        portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);

        switch (phy_mode) {
        case FSL_USB2_PHY_ULPI:
                if (pdata->have_sysif_regs && pdata->controller_ver) {
                        /* controller version 1.6 or above */
                        setbits32(non_ehci + FSL_SOC_USB_CTRL,
                                        ULPI_PHY_CLK_SEL);
                        /*
                         * Due to controller issue of PHY_CLK_VALID in ULPI
                         * mode, we set USB_CTRL_USB_EN before checking
                         * PHY_CLK_VALID, otherwise PHY_CLK_VALID doesn't work.
                         */
                        clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
                                        UTMI_PHY_EN, USB_CTRL_USB_EN);
                }
                portsc |= PORT_PTS_ULPI;
                break;
        case FSL_USB2_PHY_SERIAL:
                portsc |= PORT_PTS_SERIAL;
                break;
        case FSL_USB2_PHY_UTMI_WIDE:
                portsc |= PORT_PTS_PTW;
                /* fall through */
        case FSL_USB2_PHY_UTMI:
                if (pdata->have_sysif_regs && pdata->controller_ver) {
                        /* controller version 1.6 or above */
                        setbits32(non_ehci + FSL_SOC_USB_CTRL, UTMI_PHY_EN);
                        mdelay(FSL_UTMI_PHY_DLY);  /* Delay for UTMI PHY CLK to
                                                become stable - 10ms*/
                }
                /* enable UTMI PHY */
                if (pdata->have_sysif_regs)
                        setbits32(non_ehci + FSL_SOC_USB_CTRL,
                                  CTRL_UTMI_PHY_EN);
                portsc |= PORT_PTS_UTMI;
                break;
        case FSL_USB2_PHY_NONE:
                break;
        }

        if (pdata->have_sysif_regs && pdata->controller_ver &&
            (phy_mode == FSL_USB2_PHY_ULPI)) {
                /* check PHY_CLK_VALID to get phy clk valid */
                if (!spin_event_timeout(in_be32(non_ehci + FSL_SOC_USB_CTRL) &
                                PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT, 0)) {
                        printk(KERN_WARNING "fsl-ehci: USB PHY clock invalid\n");
                        return -EINVAL;
                }
        }

        ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);

        if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
                setbits32(non_ehci + FSL_SOC_USB_CTRL, USB_CTRL_USB_EN);

        return 0;
}

static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
{
        struct usb_hcd *hcd = ehci_to_hcd(ehci);
        struct fsl_usb2_platform_data *pdata;
        void __iomem *non_ehci = hcd->regs;

        pdata = hcd->self.controller->platform_data;

        if (pdata->have_sysif_regs) {
                /*
                * Turn on cache snooping hardware, since some PowerPC platforms
                * wholly rely on hardware to deal with cache coherent
                */

                /* Setup Snooping for all the 4GB space */
                /* SNOOP1 starts from 0x0, size 2G */
                out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
                /* SNOOP2 starts from 0x80000000, size 2G */
                out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
        }

        if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
                        (pdata->operating_mode == FSL_USB2_DR_OTG))
                if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
                        return -EINVAL;

        if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
                unsigned int chip, rev, svr;

                svr = mfspr(SPRN_SVR);
                chip = svr >> 16;
                rev = (svr >> 4) & 0xf;

                /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
                if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
                        ehci->has_fsl_port_bug = 1;

                if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
                        if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
                                return -EINVAL;

                if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
                        if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
                                return -EINVAL;
        }

        if (pdata->have_sysif_regs) {
#ifdef CONFIG_FSL_SOC_BOOKE
                out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x00000008);
                out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000080);
#else
                out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
                out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
#endif
                out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
        }

        return 0;
}

/* called after powerup, by probe or system-pm "wakeup" */
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
{
        if (ehci_fsl_usb_setup(ehci))
                return -EINVAL;

        return 0;
}

/* called during probe() after chip reset completes */
static int ehci_fsl_setup(struct usb_hcd *hcd)
{
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        int retval;
        struct fsl_usb2_platform_data *pdata;
        struct device *dev;

        dev = hcd->self.controller;
        pdata = hcd->self.controller->platform_data;
        ehci->big_endian_desc = pdata->big_endian_desc;
        ehci->big_endian_mmio = pdata->big_endian_mmio;

        /* EHCI registers start at offset 0x100 */
        ehci->caps = hcd->regs + 0x100;

#ifdef CONFIG_PPC_83xx
        /*
         * Deal with MPC834X that need port power to be cycled after the power
         * fault condition is removed. Otherwise the state machine does not
         * reflect PORTSC[CSC] correctly.
         */
        ehci->need_oc_pp_cycle = 1;
#endif

        hcd->has_tt = 1;

        retval = ehci_setup(hcd);
        if (retval)
                return retval;

        if (of_device_is_compatible(dev->parent->of_node,
                                    "fsl,mpc5121-usb2-dr")) {
                /*
                 * set SBUSCFG:AHBBRST so that control msgs don't
                 * fail when doing heavy PATA writes.
                 */
                ehci_writel(ehci, SBUSCFG_INCR8,
                            hcd->regs + FSL_SOC_USB_SBUSCFG);
        }

        retval = ehci_fsl_reinit(ehci);
        return retval;
}

struct ehci_fsl {
        struct ehci_hcd ehci;

#ifdef CONFIG_PM
        /* Saved USB PHY settings, need to restore after deep sleep. */
        u32 usb_ctrl;
#endif
};

#ifdef CONFIG_PM

#ifdef CONFIG_PPC_MPC512x
static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
{
        struct usb_hcd *hcd = dev_get_drvdata(dev);
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        struct fsl_usb2_platform_data *pdata = dev->platform_data;
        u32 tmp;

#ifdef DEBUG
        u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
        mode &= USBMODE_CM_MASK;
        tmp = ehci_readl(ehci, hcd->regs + 0x140);      /* usbcmd */

        dev_dbg(dev, "suspend=%d already_suspended=%d "
                "mode=%d  usbcmd %08x\n", pdata->suspended,
                pdata->already_suspended, mode, tmp);
#endif

        /*
         * If the controller is already suspended, then this must be a
         * PM suspend.  Remember this fact, so that we will leave the
         * controller suspended at PM resume time.
         */
        if (pdata->suspended) {
                dev_dbg(dev, "already suspended, leaving early\n");
                pdata->already_suspended = 1;
                return 0;
        }

        dev_dbg(dev, "suspending...\n");

        ehci->rh_state = EHCI_RH_SUSPENDED;
        dev->power.power_state = PMSG_SUSPEND;

        /* ignore non-host interrupts */
        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);

        /* stop the controller */
        tmp = ehci_readl(ehci, &ehci->regs->command);
        tmp &= ~CMD_RUN;
        ehci_writel(ehci, tmp, &ehci->regs->command);

        /* save EHCI registers */
        pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
        pdata->pm_command &= ~CMD_RUN;
        pdata->pm_status  = ehci_readl(ehci, &ehci->regs->status);
        pdata->pm_intr_enable  = ehci_readl(ehci, &ehci->regs->intr_enable);
        pdata->pm_frame_index  = ehci_readl(ehci, &ehci->regs->frame_index);
        pdata->pm_segment  = ehci_readl(ehci, &ehci->regs->segment);
        pdata->pm_frame_list  = ehci_readl(ehci, &ehci->regs->frame_list);
        pdata->pm_async_next  = ehci_readl(ehci, &ehci->regs->async_next);
        pdata->pm_configured_flag  =
                ehci_readl(ehci, &ehci->regs->configured_flag);
        pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
        pdata->pm_usbgenctrl = ehci_readl(ehci,
                                          hcd->regs + FSL_SOC_USB_USBGENCTRL);

        /* clear the W1C bits */
        pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);

        pdata->suspended = 1;

        /* clear PP to cut power to the port */
        tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
        tmp &= ~PORT_POWER;
        ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);

        return 0;
}

static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
{
        struct usb_hcd *hcd = dev_get_drvdata(dev);
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        struct fsl_usb2_platform_data *pdata = dev->platform_data;
        u32 tmp;

        dev_dbg(dev, "suspend=%d already_suspended=%d\n",
                pdata->suspended, pdata->already_suspended);

        /*
         * If the controller was already suspended at suspend time,
         * then don't resume it now.
         */
        if (pdata->already_suspended) {
                dev_dbg(dev, "already suspended, leaving early\n");
                pdata->already_suspended = 0;
                return 0;
        }

        if (!pdata->suspended) {
                dev_dbg(dev, "not suspended, leaving early\n");
                return 0;
        }

        pdata->suspended = 0;

        dev_dbg(dev, "resuming...\n");

        /* set host mode */
        tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
        ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);

        ehci_writel(ehci, pdata->pm_usbgenctrl,
                    hcd->regs + FSL_SOC_USB_USBGENCTRL);
        ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
                    hcd->regs + FSL_SOC_USB_ISIPHYCTRL);

        ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);

        /* restore EHCI registers */
        ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
        ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
        ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
        ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
        ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
        ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
        ehci_writel(ehci, pdata->pm_configured_flag,
                    &ehci->regs->configured_flag);
        ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);

        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
        ehci->rh_state = EHCI_RH_RUNNING;
        dev->power.power_state = PMSG_ON;

        tmp = ehci_readl(ehci, &ehci->regs->command);
        tmp |= CMD_RUN;
        ehci_writel(ehci, tmp, &ehci->regs->command);

        usb_hcd_resume_root_hub(hcd);

        return 0;
}
#else
static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
{
        return 0;
}

static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
{
        return 0;
}
#endif /* CONFIG_PPC_MPC512x */

static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
{
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);

        return container_of(ehci, struct ehci_fsl, ehci);
}

static int ehci_fsl_drv_suspend(struct device *dev)
{
        struct usb_hcd *hcd = dev_get_drvdata(dev);
        struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
        void __iomem *non_ehci = hcd->regs;

        if (of_device_is_compatible(dev->parent->of_node,
                                    "fsl,mpc5121-usb2-dr")) {
                return ehci_fsl_mpc512x_drv_suspend(dev);
        }

        ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
                        device_may_wakeup(dev));
        if (!fsl_deep_sleep())
                return 0;

        ehci_fsl->usb_ctrl = in_be32(non_ehci + FSL_SOC_USB_CTRL);
        return 0;
}

static int ehci_fsl_drv_resume(struct device *dev)
{
        struct usb_hcd *hcd = dev_get_drvdata(dev);
        struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        void __iomem *non_ehci = hcd->regs;

        if (of_device_is_compatible(dev->parent->of_node,
                                    "fsl,mpc5121-usb2-dr")) {
                return ehci_fsl_mpc512x_drv_resume(dev);
        }

        ehci_prepare_ports_for_controller_resume(ehci);
        if (!fsl_deep_sleep())
                return 0;

        usb_root_hub_lost_power(hcd->self.root_hub);

        /* Restore USB PHY settings and enable the controller. */
        out_be32(non_ehci + FSL_SOC_USB_CTRL, ehci_fsl->usb_ctrl);

        ehci_reset(ehci);
        ehci_fsl_reinit(ehci);

        return 0;
}

static int ehci_fsl_drv_restore(struct device *dev)
{
        struct usb_hcd *hcd = dev_get_drvdata(dev);

        usb_root_hub_lost_power(hcd->self.root_hub);
        return 0;
}

static struct dev_pm_ops ehci_fsl_pm_ops = {
        .suspend = ehci_fsl_drv_suspend,
        .resume = ehci_fsl_drv_resume,
        .restore = ehci_fsl_drv_restore,
};

#define EHCI_FSL_PM_OPS         (&ehci_fsl_pm_ops)
#else
#define EHCI_FSL_PM_OPS         NULL
#endif /* CONFIG_PM */

#ifdef CONFIG_USB_OTG
static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
{
        struct ehci_hcd *ehci = hcd_to_ehci(hcd);
        u32 status;

        if (!port)
                return -EINVAL;

        port--;

        /* start port reset before HNP protocol time out */
        status = readl(&ehci->regs->port_status[port]);
        if (!(status & PORT_CONNECT))
                return -ENODEV;

        /* khubd will finish the reset later */
        if (ehci_is_TDI(ehci)) {
                writel(PORT_RESET |
                       (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
                       &ehci->regs->port_status[port]);
        } else {
                writel(PORT_RESET, &ehci->regs->port_status[port]);
        }

        return 0;
}
#else
#define ehci_start_port_reset   NULL
#endif /* CONFIG_USB_OTG */


static const struct hc_driver ehci_fsl_hc_driver = {
        .description = hcd_name,
        .product_desc = "Freescale On-Chip EHCI Host Controller",
        .hcd_priv_size = sizeof(struct ehci_fsl),

        /*
         * generic hardware linkage
         */
        .irq = ehci_irq,
        .flags = HCD_USB2 | HCD_MEMORY,

        /*
         * basic lifecycle operations
         */
        .reset = ehci_fsl_setup,
        .start = ehci_run,
        .stop = ehci_stop,
        .shutdown = ehci_shutdown,

        /*
         * managing i/o requests and associated device resources
         */
        .urb_enqueue = ehci_urb_enqueue,
        .urb_dequeue = ehci_urb_dequeue,
        .endpoint_disable = ehci_endpoint_disable,
        .endpoint_reset = ehci_endpoint_reset,

        /*
         * scheduling support
         */
        .get_frame_number = ehci_get_frame,

        /*
         * root hub support
         */
        .hub_status_data = ehci_hub_status_data,
        .hub_control = ehci_hub_control,
        .bus_suspend = ehci_bus_suspend,
        .bus_resume = ehci_bus_resume,
        .start_port_reset = ehci_start_port_reset,
        .relinquish_port = ehci_relinquish_port,
        .port_handed_over = ehci_port_handed_over,

        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};

static int ehci_fsl_drv_probe(struct platform_device *pdev)
{
        if (usb_disabled())
                return -ENODEV;

        /* FIXME we only want one one probe() not two */
        return usb_hcd_fsl_probe(&ehci_fsl_hc_driver, pdev);
}

static int ehci_fsl_drv_remove(struct platform_device *pdev)
{
        struct usb_hcd *hcd = platform_get_drvdata(pdev);

        /* FIXME we only want one one remove() not two */
        usb_hcd_fsl_remove(hcd, pdev);
        return 0;
}

MODULE_ALIAS("platform:fsl-ehci");

static struct platform_driver ehci_fsl_driver = {
        .probe = ehci_fsl_drv_probe,
        .remove = ehci_fsl_drv_remove,
        .shutdown = usb_hcd_platform_shutdown,
        .driver = {
                .name = "fsl-ehci",
                .pm = EHCI_FSL_PM_OPS,
        },
};