linux/sound/soc/codecs/wm9090.c
<<
>>
Prefs
   1/*
   2 * ALSA SoC WM9090 driver
   3 *
   4 * Copyright 2009-12 Wolfson Microelectronics
   5 *
   6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7 *
   8 * This program is free software; you can redistribute it and/or
   9 * modify it under the terms of the GNU General Public License
  10 * version 2 as published by the Free Software Foundation.
  11 *
  12 * This program is distributed in the hope that it will be useful, but
  13 * WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  15 * General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License
  18 * along with this program; if not, write to the Free Software
  19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  20 * 02110-1301 USA
  21 */
  22
  23#include <linux/module.h>
  24#include <linux/errno.h>
  25#include <linux/device.h>
  26#include <linux/i2c.h>
  27#include <linux/delay.h>
  28#include <linux/regmap.h>
  29#include <linux/slab.h>
  30#include <sound/initval.h>
  31#include <sound/soc.h>
  32#include <sound/tlv.h>
  33#include <sound/wm9090.h>
  34
  35#include "wm9090.h"
  36
  37static const struct reg_default wm9090_reg_defaults[] = {
  38        { 1,  0x0006 },     /* R1   - Power Management (1) */
  39        { 2,  0x6000 },     /* R2   - Power Management (2) */
  40        { 3,  0x0000 },     /* R3   - Power Management (3) */
  41        { 6,  0x01C0 },     /* R6   - Clocking 1 */
  42        { 22, 0x0003 },     /* R22  - IN1 Line Control */
  43        { 23, 0x0003 },     /* R23  - IN2 Line Control */
  44        { 24, 0x0083 },     /* R24  - IN1 Line Input A Volume */
  45        { 25, 0x0083 },     /* R25  - IN1  Line Input B Volume */
  46        { 26, 0x0083 },     /* R26  - IN2 Line Input A Volume */
  47        { 27, 0x0083 },     /* R27  - IN2 Line Input B Volume */
  48        { 28, 0x002D },     /* R28  - Left Output Volume */
  49        { 29, 0x002D },     /* R29  - Right Output Volume */
  50        { 34, 0x0100 },     /* R34  - SPKMIXL Attenuation */
  51        { 35, 0x0010 },     /* R36  - SPKOUT Mixers */
  52        { 37, 0x0140 },     /* R37  - ClassD3 */
  53        { 38, 0x0039 },     /* R38  - Speaker Volume Left */
  54        { 45, 0x0000 },     /* R45  - Output Mixer1 */
  55        { 46, 0x0000 },     /* R46  - Output Mixer2 */
  56        { 47, 0x0100 },     /* R47  - Output Mixer3 */
  57        { 48, 0x0100 },     /* R48  - Output Mixer4 */
  58        { 54, 0x0000 },     /* R54  - Speaker Mixer */
  59        { 57, 0x000D },     /* R57  - AntiPOP2 */
  60        { 70, 0x0000 },     /* R70  - Write Sequencer 0 */
  61        { 71, 0x0000 },     /* R71  - Write Sequencer 1 */
  62        { 72, 0x0000 },     /* R72  - Write Sequencer 2 */
  63        { 73, 0x0000 },     /* R73  - Write Sequencer 3 */
  64        { 74, 0x0000 },     /* R74  - Write Sequencer 4 */
  65        { 75, 0x0000 },     /* R75  - Write Sequencer 5 */
  66        { 76, 0x1F25 },     /* R76  - Charge Pump 1 */
  67        { 85, 0x054A },     /* R85  - DC Servo 1 */
  68        { 87, 0x0000 },     /* R87  - DC Servo 3 */
  69        { 96, 0x0100 },     /* R96  - Analogue HP 0 */
  70        { 98, 0x8640 },     /* R98  - AGC Control 0 */
  71        { 99, 0xC000 },     /* R99  - AGC Control 1 */
  72        { 100, 0x0200 },     /* R100 - AGC Control 2 */
  73};
  74
  75/* This struct is used to save the context */
  76struct wm9090_priv {
  77        struct wm9090_platform_data pdata;
  78        struct regmap *regmap;
  79};
  80
  81static bool wm9090_volatile(struct device *dev, unsigned int reg)
  82{
  83        switch (reg) {
  84        case WM9090_SOFTWARE_RESET:
  85        case WM9090_DC_SERVO_0:
  86        case WM9090_DC_SERVO_READBACK_0:
  87        case WM9090_DC_SERVO_READBACK_1:
  88        case WM9090_DC_SERVO_READBACK_2:
  89                return true;
  90
  91        default:
  92                return false;
  93        }
  94}
  95
  96static bool wm9090_readable(struct device *dev, unsigned int reg)
  97{
  98        switch (reg) {
  99        case WM9090_SOFTWARE_RESET:
 100        case WM9090_POWER_MANAGEMENT_1:
 101        case WM9090_POWER_MANAGEMENT_2:
 102        case WM9090_POWER_MANAGEMENT_3:
 103        case WM9090_CLOCKING_1:
 104        case WM9090_IN1_LINE_CONTROL:
 105        case WM9090_IN2_LINE_CONTROL:
 106        case WM9090_IN1_LINE_INPUT_A_VOLUME:
 107        case WM9090_IN1_LINE_INPUT_B_VOLUME:
 108        case WM9090_IN2_LINE_INPUT_A_VOLUME:
 109        case WM9090_IN2_LINE_INPUT_B_VOLUME:
 110        case WM9090_LEFT_OUTPUT_VOLUME:
 111        case WM9090_RIGHT_OUTPUT_VOLUME:
 112        case WM9090_SPKMIXL_ATTENUATION:
 113        case WM9090_SPKOUT_MIXERS:
 114        case WM9090_CLASSD3:
 115        case WM9090_SPEAKER_VOLUME_LEFT:
 116        case WM9090_OUTPUT_MIXER1:
 117        case WM9090_OUTPUT_MIXER2:
 118        case WM9090_OUTPUT_MIXER3:
 119        case WM9090_OUTPUT_MIXER4:
 120        case WM9090_SPEAKER_MIXER:
 121        case WM9090_ANTIPOP2:
 122        case WM9090_WRITE_SEQUENCER_0:
 123        case WM9090_WRITE_SEQUENCER_1:
 124        case WM9090_WRITE_SEQUENCER_2:
 125        case WM9090_WRITE_SEQUENCER_3:
 126        case WM9090_WRITE_SEQUENCER_4:
 127        case WM9090_WRITE_SEQUENCER_5:
 128        case WM9090_CHARGE_PUMP_1:
 129        case WM9090_DC_SERVO_0:
 130        case WM9090_DC_SERVO_1:
 131        case WM9090_DC_SERVO_3:
 132        case WM9090_DC_SERVO_READBACK_0:
 133        case WM9090_DC_SERVO_READBACK_1:
 134        case WM9090_DC_SERVO_READBACK_2:
 135        case WM9090_ANALOGUE_HP_0:
 136        case WM9090_AGC_CONTROL_0:
 137        case WM9090_AGC_CONTROL_1:
 138        case WM9090_AGC_CONTROL_2:
 139                return true;
 140
 141        default:
 142                return false;
 143        }
 144}
 145
 146static void wait_for_dc_servo(struct snd_soc_codec *codec)
 147{
 148        unsigned int reg;
 149        int count = 0;
 150
 151        dev_dbg(codec->dev, "Waiting for DC servo...\n");
 152        do {
 153                count++;
 154                msleep(1);
 155                reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0);
 156                dev_dbg(codec->dev, "DC servo status: %x\n", reg);
 157        } while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
 158                 != WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
 159
 160        if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
 161            != WM9090_DCS_CAL_COMPLETE_MASK)
 162                dev_err(codec->dev, "Timed out waiting for DC Servo\n");
 163}
 164
 165static const unsigned int in_tlv[] = {
 166        TLV_DB_RANGE_HEAD(3),
 167        0, 0, TLV_DB_SCALE_ITEM(-600, 0, 0),
 168        1, 3, TLV_DB_SCALE_ITEM(-350, 350, 0),
 169        4, 6, TLV_DB_SCALE_ITEM(600, 600, 0),
 170};
 171static const unsigned int mix_tlv[] = {
 172        TLV_DB_RANGE_HEAD(2),
 173        0, 2, TLV_DB_SCALE_ITEM(-1200, 300, 0),
 174        3, 3, TLV_DB_SCALE_ITEM(0, 0, 0),
 175};
 176static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
 177static const unsigned int spkboost_tlv[] = {
 178        TLV_DB_RANGE_HEAD(2),
 179        0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
 180        7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
 181};
 182
 183static const struct snd_kcontrol_new wm9090_controls[] = {
 184SOC_SINGLE_TLV("IN1A Volume", WM9090_IN1_LINE_INPUT_A_VOLUME, 0, 6, 0,
 185               in_tlv),
 186SOC_SINGLE("IN1A Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 7, 1, 1),
 187SOC_SINGLE("IN1A ZC Switch", WM9090_IN1_LINE_INPUT_A_VOLUME, 6, 1, 0),
 188
 189SOC_SINGLE_TLV("IN2A Volume", WM9090_IN2_LINE_INPUT_A_VOLUME, 0, 6, 0,
 190               in_tlv),
 191SOC_SINGLE("IN2A Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 7, 1, 1),
 192SOC_SINGLE("IN2A ZC Switch", WM9090_IN2_LINE_INPUT_A_VOLUME, 6, 1, 0),
 193
 194SOC_SINGLE("MIXOUTL Switch", WM9090_OUTPUT_MIXER3, 8, 1, 1),
 195SOC_SINGLE_TLV("MIXOUTL IN1A Volume", WM9090_OUTPUT_MIXER3, 6, 3, 1,
 196               mix_tlv),
 197SOC_SINGLE_TLV("MIXOUTL IN2A Volume", WM9090_OUTPUT_MIXER3, 2, 3, 1,
 198               mix_tlv),
 199
 200SOC_SINGLE("MIXOUTR Switch", WM9090_OUTPUT_MIXER4, 8, 1, 1),
 201SOC_SINGLE_TLV("MIXOUTR IN1A Volume", WM9090_OUTPUT_MIXER4, 6, 3, 1,
 202               mix_tlv),
 203SOC_SINGLE_TLV("MIXOUTR IN2A Volume", WM9090_OUTPUT_MIXER4, 2, 3, 1,
 204               mix_tlv),
 205
 206SOC_SINGLE("SPKMIX Switch", WM9090_SPKMIXL_ATTENUATION, 8, 1, 1),
 207SOC_SINGLE_TLV("SPKMIX IN1A Volume", WM9090_SPKMIXL_ATTENUATION, 6, 3, 1,
 208               mix_tlv),
 209SOC_SINGLE_TLV("SPKMIX IN2A Volume", WM9090_SPKMIXL_ATTENUATION, 2, 3, 1,
 210               mix_tlv),
 211
 212SOC_DOUBLE_R_TLV("Headphone Volume", WM9090_LEFT_OUTPUT_VOLUME,
 213                 WM9090_RIGHT_OUTPUT_VOLUME, 0, 63, 0, out_tlv),
 214SOC_DOUBLE_R("Headphone Switch", WM9090_LEFT_OUTPUT_VOLUME,
 215             WM9090_RIGHT_OUTPUT_VOLUME, 6, 1, 1),
 216SOC_DOUBLE_R("Headphone ZC Switch", WM9090_LEFT_OUTPUT_VOLUME,
 217             WM9090_RIGHT_OUTPUT_VOLUME, 7, 1, 0),
 218
 219SOC_SINGLE_TLV("Speaker Volume", WM9090_SPEAKER_VOLUME_LEFT, 0, 63, 0,
 220               out_tlv),
 221SOC_SINGLE("Speaker Switch", WM9090_SPEAKER_VOLUME_LEFT, 6, 1, 1),
 222SOC_SINGLE("Speaker ZC Switch", WM9090_SPEAKER_VOLUME_LEFT, 7, 1, 0),
 223SOC_SINGLE_TLV("Speaker Boost Volume", WM9090_CLASSD3, 3, 7, 0, spkboost_tlv),
 224};
 225
 226static const struct snd_kcontrol_new wm9090_in1_se_controls[] = {
 227SOC_SINGLE_TLV("IN1B Volume", WM9090_IN1_LINE_INPUT_B_VOLUME, 0, 6, 0,
 228               in_tlv),
 229SOC_SINGLE("IN1B Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 7, 1, 1),
 230SOC_SINGLE("IN1B ZC Switch", WM9090_IN1_LINE_INPUT_B_VOLUME, 6, 1, 0),
 231
 232SOC_SINGLE_TLV("SPKMIX IN1B Volume", WM9090_SPKMIXL_ATTENUATION, 4, 3, 1,
 233               mix_tlv),
 234SOC_SINGLE_TLV("MIXOUTL IN1B Volume", WM9090_OUTPUT_MIXER3, 4, 3, 1,
 235               mix_tlv),
 236SOC_SINGLE_TLV("MIXOUTR IN1B Volume", WM9090_OUTPUT_MIXER4, 4, 3, 1,
 237               mix_tlv),
 238};
 239
 240static const struct snd_kcontrol_new wm9090_in2_se_controls[] = {
 241SOC_SINGLE_TLV("IN2B Volume", WM9090_IN2_LINE_INPUT_B_VOLUME, 0, 6, 0,
 242               in_tlv),
 243SOC_SINGLE("IN2B Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 7, 1, 1),
 244SOC_SINGLE("IN2B ZC Switch", WM9090_IN2_LINE_INPUT_B_VOLUME, 6, 1, 0),
 245
 246SOC_SINGLE_TLV("SPKMIX IN2B Volume", WM9090_SPKMIXL_ATTENUATION, 0, 3, 1,
 247               mix_tlv),
 248SOC_SINGLE_TLV("MIXOUTL IN2B Volume", WM9090_OUTPUT_MIXER3, 0, 3, 1,
 249               mix_tlv),
 250SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1,
 251               mix_tlv),
 252};
 253
 254static int hp_ev(struct snd_soc_dapm_widget *w,
 255                 struct snd_kcontrol *kcontrol, int event)
 256{
 257        struct snd_soc_codec *codec = w->codec;
 258        unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0);
 259
 260        switch (event) {
 261        case SND_SOC_DAPM_POST_PMU:
 262                snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
 263                                    WM9090_CP_ENA, WM9090_CP_ENA);
 264
 265                msleep(5);
 266
 267                snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 268                                    WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
 269                                    WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
 270
 271                reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
 272                snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
 273
 274                /* Start the DC servo.  We don't currently use the
 275                 * ability to save the state since we don't have full
 276                 * control of the analogue paths and they can change
 277                 * DC offsets; see the WM8904 driver for an example of
 278                 * doing so.
 279                 */
 280                snd_soc_write(codec, WM9090_DC_SERVO_0,
 281                              WM9090_DCS_ENA_CHAN_0 |
 282                              WM9090_DCS_ENA_CHAN_1 |
 283                              WM9090_DCS_TRIG_STARTUP_1 |
 284                              WM9090_DCS_TRIG_STARTUP_0);
 285                wait_for_dc_servo(codec);
 286
 287                reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
 288                        WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
 289                snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
 290                break;
 291
 292        case SND_SOC_DAPM_PRE_PMD:
 293                reg &= ~(WM9090_HPOUT1L_RMV_SHORT |
 294                         WM9090_HPOUT1L_DLY |
 295                         WM9090_HPOUT1L_OUTP |
 296                         WM9090_HPOUT1R_RMV_SHORT |
 297                         WM9090_HPOUT1R_DLY |
 298                         WM9090_HPOUT1R_OUTP);
 299
 300                snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
 301
 302                snd_soc_write(codec, WM9090_DC_SERVO_0, 0);
 303
 304                snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 305                                    WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
 306                                    0);
 307
 308                snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
 309                                    WM9090_CP_ENA, 0);
 310                break;
 311        }
 312
 313        return 0;
 314}
 315
 316static const struct snd_kcontrol_new spkmix[] = {
 317SOC_DAPM_SINGLE("IN1A Switch", WM9090_SPEAKER_MIXER, 6, 1, 0),
 318SOC_DAPM_SINGLE("IN1B Switch", WM9090_SPEAKER_MIXER, 4, 1, 0),
 319SOC_DAPM_SINGLE("IN2A Switch", WM9090_SPEAKER_MIXER, 2, 1, 0),
 320SOC_DAPM_SINGLE("IN2B Switch", WM9090_SPEAKER_MIXER, 0, 1, 0),
 321};
 322
 323static const struct snd_kcontrol_new spkout[] = {
 324SOC_DAPM_SINGLE("Mixer Switch", WM9090_SPKOUT_MIXERS, 4, 1, 0),
 325};
 326
 327static const struct snd_kcontrol_new mixoutl[] = {
 328SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER1, 6, 1, 0),
 329SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER1, 4, 1, 0),
 330SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER1, 2, 1, 0),
 331SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER1, 0, 1, 0),
 332};
 333
 334static const struct snd_kcontrol_new mixoutr[] = {
 335SOC_DAPM_SINGLE("IN1A Switch", WM9090_OUTPUT_MIXER2, 6, 1, 0),
 336SOC_DAPM_SINGLE("IN1B Switch", WM9090_OUTPUT_MIXER2, 4, 1, 0),
 337SOC_DAPM_SINGLE("IN2A Switch", WM9090_OUTPUT_MIXER2, 2, 1, 0),
 338SOC_DAPM_SINGLE("IN2B Switch", WM9090_OUTPUT_MIXER2, 0, 1, 0),
 339};
 340
 341static const struct snd_soc_dapm_widget wm9090_dapm_widgets[] = {
 342SND_SOC_DAPM_INPUT("IN1+"),
 343SND_SOC_DAPM_INPUT("IN1-"),
 344SND_SOC_DAPM_INPUT("IN2+"),
 345SND_SOC_DAPM_INPUT("IN2-"),
 346
 347SND_SOC_DAPM_SUPPLY("OSC", WM9090_POWER_MANAGEMENT_1, 3, 0, NULL, 0),
 348
 349SND_SOC_DAPM_PGA("IN1A PGA", WM9090_POWER_MANAGEMENT_2, 7, 0, NULL, 0),
 350SND_SOC_DAPM_PGA("IN1B PGA", WM9090_POWER_MANAGEMENT_2, 6, 0, NULL, 0),
 351SND_SOC_DAPM_PGA("IN2A PGA", WM9090_POWER_MANAGEMENT_2, 5, 0, NULL, 0),
 352SND_SOC_DAPM_PGA("IN2B PGA", WM9090_POWER_MANAGEMENT_2, 4, 0, NULL, 0),
 353
 354SND_SOC_DAPM_MIXER("SPKMIX", WM9090_POWER_MANAGEMENT_3, 3, 0,
 355                   spkmix, ARRAY_SIZE(spkmix)),
 356SND_SOC_DAPM_MIXER("MIXOUTL", WM9090_POWER_MANAGEMENT_3, 5, 0,
 357                   mixoutl, ARRAY_SIZE(mixoutl)),
 358SND_SOC_DAPM_MIXER("MIXOUTR", WM9090_POWER_MANAGEMENT_3, 4, 0,
 359                   mixoutr, ARRAY_SIZE(mixoutr)),
 360
 361SND_SOC_DAPM_PGA_E("HP PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
 362                   hp_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 363
 364SND_SOC_DAPM_PGA("SPKPGA", WM9090_POWER_MANAGEMENT_3, 8, 0, NULL, 0),
 365SND_SOC_DAPM_MIXER("SPKOUT", WM9090_POWER_MANAGEMENT_1, 12, 0,
 366                   spkout, ARRAY_SIZE(spkout)),
 367
 368SND_SOC_DAPM_OUTPUT("HPR"),
 369SND_SOC_DAPM_OUTPUT("HPL"),
 370SND_SOC_DAPM_OUTPUT("Speaker"),
 371};
 372
 373static const struct snd_soc_dapm_route audio_map[] = {
 374        { "IN1A PGA", NULL, "IN1+" },
 375        { "IN2A PGA", NULL, "IN2+" },
 376
 377        { "SPKMIX", "IN1A Switch", "IN1A PGA" },
 378        { "SPKMIX", "IN2A Switch", "IN2A PGA" },
 379
 380        { "MIXOUTL", "IN1A Switch", "IN1A PGA" },
 381        { "MIXOUTL", "IN2A Switch", "IN2A PGA" },
 382
 383        { "MIXOUTR", "IN1A Switch", "IN1A PGA" },
 384        { "MIXOUTR", "IN2A Switch", "IN2A PGA" },
 385
 386        { "HP PGA", NULL, "OSC" },
 387        { "HP PGA", NULL, "MIXOUTL" },
 388        { "HP PGA", NULL, "MIXOUTR" },
 389
 390        { "HPL", NULL, "HP PGA" },
 391        { "HPR", NULL, "HP PGA" },
 392
 393        { "SPKPGA", NULL, "OSC" },
 394        { "SPKPGA", NULL, "SPKMIX" },
 395
 396        { "SPKOUT", "Mixer Switch", "SPKPGA" },
 397
 398        { "Speaker", NULL, "SPKOUT" },
 399};
 400
 401static const struct snd_soc_dapm_route audio_map_in1_se[] = {
 402        { "IN1B PGA", NULL, "IN1-" },   
 403
 404        { "SPKMIX", "IN1B Switch", "IN1B PGA" },
 405        { "MIXOUTL", "IN1B Switch", "IN1B PGA" },
 406        { "MIXOUTR", "IN1B Switch", "IN1B PGA" },
 407};
 408
 409static const struct snd_soc_dapm_route audio_map_in1_diff[] = {
 410        { "IN1A PGA", NULL, "IN1-" },   
 411};
 412
 413static const struct snd_soc_dapm_route audio_map_in2_se[] = {
 414        { "IN2B PGA", NULL, "IN2-" },   
 415
 416        { "SPKMIX", "IN2B Switch", "IN2B PGA" },
 417        { "MIXOUTL", "IN2B Switch", "IN2B PGA" },
 418        { "MIXOUTR", "IN2B Switch", "IN2B PGA" },
 419};
 420
 421static const struct snd_soc_dapm_route audio_map_in2_diff[] = {
 422        { "IN2A PGA", NULL, "IN2-" },   
 423};
 424
 425static int wm9090_add_controls(struct snd_soc_codec *codec)
 426{
 427        struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
 428        struct snd_soc_dapm_context *dapm = &codec->dapm;
 429        int i;
 430
 431        snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
 432                                  ARRAY_SIZE(wm9090_dapm_widgets));
 433
 434        snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
 435
 436        snd_soc_add_codec_controls(codec, wm9090_controls,
 437                             ARRAY_SIZE(wm9090_controls));
 438
 439        if (wm9090->pdata.lin1_diff) {
 440                snd_soc_dapm_add_routes(dapm, audio_map_in1_diff,
 441                                        ARRAY_SIZE(audio_map_in1_diff));
 442        } else {
 443                snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
 444                                        ARRAY_SIZE(audio_map_in1_se));
 445                snd_soc_add_codec_controls(codec, wm9090_in1_se_controls,
 446                                     ARRAY_SIZE(wm9090_in1_se_controls));
 447        }
 448
 449        if (wm9090->pdata.lin2_diff) {
 450                snd_soc_dapm_add_routes(dapm, audio_map_in2_diff,
 451                                        ARRAY_SIZE(audio_map_in2_diff));
 452        } else {
 453                snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
 454                                        ARRAY_SIZE(audio_map_in2_se));
 455                snd_soc_add_codec_controls(codec, wm9090_in2_se_controls,
 456                                     ARRAY_SIZE(wm9090_in2_se_controls));
 457        }
 458
 459        if (wm9090->pdata.agc_ena) {
 460                for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
 461                        snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i,
 462                                      wm9090->pdata.agc[i]);
 463                snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
 464                                    WM9090_AGC_ENA, WM9090_AGC_ENA);
 465        } else {
 466                snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
 467                                    WM9090_AGC_ENA, 0);
 468        }
 469
 470        return 0;
 471
 472}
 473
 474/*
 475 * The machine driver should call this from their set_bias_level; if there
 476 * isn't one then this can just be set as the set_bias_level function.
 477 */
 478static int wm9090_set_bias_level(struct snd_soc_codec *codec,
 479                                 enum snd_soc_bias_level level)
 480{
 481        struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
 482
 483        switch (level) {
 484        case SND_SOC_BIAS_ON:
 485                break;
 486
 487        case SND_SOC_BIAS_PREPARE:
 488                snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA,
 489                                    WM9090_VMID_ENA);
 490                snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 491                                    WM9090_BIAS_ENA |
 492                                    WM9090_VMID_RES_MASK,
 493                                    WM9090_BIAS_ENA |
 494                                    1 << WM9090_VMID_RES_SHIFT);
 495                msleep(1);  /* Probably an overestimate */
 496                break;
 497
 498        case SND_SOC_BIAS_STANDBY:
 499                if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
 500                        /* Restore the register cache */
 501                        regcache_sync(wm9090->regmap);
 502                }
 503
 504                /* We keep VMID off during standby since the combination of
 505                 * ground referenced outputs and class D speaker mean that
 506                 * latency is not an issue.
 507                 */
 508                snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
 509                                    WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
 510                snd_soc_update_bits(codec, WM9090_ANTIPOP2,
 511                                    WM9090_VMID_ENA, 0);
 512                break;
 513
 514        case SND_SOC_BIAS_OFF:
 515                break;
 516        }
 517
 518        codec->dapm.bias_level = level;
 519
 520        return 0;
 521}
 522
 523static int wm9090_probe(struct snd_soc_codec *codec)
 524{
 525        struct wm9090_priv *wm9090 = dev_get_drvdata(codec->dev);
 526        int ret;
 527
 528        codec->control_data = wm9090->regmap;
 529        ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_REGMAP);
 530        if (ret != 0) {
 531                dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
 532                return ret;
 533        }
 534
 535        /* Configure some defaults; they will be written out when we
 536         * bring the bias up.
 537         */
 538        snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
 539                            WM9090_IN1_VU | WM9090_IN1A_ZC,
 540                            WM9090_IN1_VU | WM9090_IN1A_ZC);
 541        snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
 542                            WM9090_IN1_VU | WM9090_IN1B_ZC,
 543                            WM9090_IN1_VU | WM9090_IN1B_ZC);
 544        snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
 545                            WM9090_IN2_VU | WM9090_IN2A_ZC,
 546                            WM9090_IN2_VU | WM9090_IN2A_ZC);
 547        snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
 548                            WM9090_IN2_VU | WM9090_IN2B_ZC,
 549                            WM9090_IN2_VU | WM9090_IN2B_ZC);
 550        snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
 551                            WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
 552                            WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
 553        snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
 554                            WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
 555                            WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
 556        snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
 557                            WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
 558                            WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
 559
 560        snd_soc_update_bits(codec, WM9090_CLOCKING_1,
 561                            WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
 562
 563        wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 564
 565        wm9090_add_controls(codec);
 566
 567        return 0;
 568}
 569
 570#ifdef CONFIG_PM
 571static int wm9090_suspend(struct snd_soc_codec *codec)
 572{
 573        wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF);
 574
 575        return 0;
 576}
 577
 578static int wm9090_resume(struct snd_soc_codec *codec)
 579{
 580        wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 581
 582        return 0;
 583}
 584#else
 585#define wm9090_suspend NULL
 586#define wm9090_resume NULL
 587#endif
 588
 589static int wm9090_remove(struct snd_soc_codec *codec)
 590{
 591        wm9090_set_bias_level(codec, SND_SOC_BIAS_OFF);
 592
 593        return 0;
 594}
 595
 596static struct snd_soc_codec_driver soc_codec_dev_wm9090 = {
 597        .probe =        wm9090_probe,
 598        .remove =       wm9090_remove,
 599        .suspend =      wm9090_suspend,
 600        .resume =       wm9090_resume,
 601        .set_bias_level = wm9090_set_bias_level,
 602};
 603
 604static const struct regmap_config wm9090_regmap = {
 605        .reg_bits = 8,
 606        .val_bits = 16,
 607
 608        .max_register = WM9090_MAX_REGISTER,
 609        .volatile_reg = wm9090_volatile,
 610        .readable_reg = wm9090_readable,
 611
 612        .cache_type = REGCACHE_RBTREE,
 613        .reg_defaults = wm9090_reg_defaults,
 614        .num_reg_defaults = ARRAY_SIZE(wm9090_reg_defaults),
 615};
 616
 617
 618static int wm9090_i2c_probe(struct i2c_client *i2c,
 619                            const struct i2c_device_id *id)
 620{
 621        struct wm9090_priv *wm9090;
 622        unsigned int reg;
 623        int ret;
 624
 625        wm9090 = devm_kzalloc(&i2c->dev, sizeof(*wm9090), GFP_KERNEL);
 626        if (wm9090 == NULL) {
 627                dev_err(&i2c->dev, "Can not allocate memory\n");
 628                return -ENOMEM;
 629        }
 630
 631        wm9090->regmap = devm_regmap_init_i2c(i2c, &wm9090_regmap);
 632        if (IS_ERR(wm9090->regmap)) {
 633                ret = PTR_ERR(wm9090->regmap);
 634                dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
 635                return ret;
 636        }
 637
 638        ret = regmap_read(wm9090->regmap, WM9090_SOFTWARE_RESET, &reg);
 639        if (ret < 0)
 640                return ret;
 641
 642        if (reg != 0x9093) {
 643                dev_err(&i2c->dev, "Device is not a WM9090, ID=%x\n", reg);
 644                return -ENODEV;
 645        }
 646
 647        ret = regmap_write(wm9090->regmap, WM9090_SOFTWARE_RESET, 0);
 648        if (ret < 0)
 649                return ret;
 650
 651        if (i2c->dev.platform_data)
 652                memcpy(&wm9090->pdata, i2c->dev.platform_data,
 653                       sizeof(wm9090->pdata));
 654
 655        i2c_set_clientdata(i2c, wm9090);
 656
 657        ret =  snd_soc_register_codec(&i2c->dev,
 658                        &soc_codec_dev_wm9090,  NULL, 0);
 659        if (ret != 0) {
 660                dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
 661                return ret;
 662        }
 663
 664        return 0;
 665}
 666
 667static int wm9090_i2c_remove(struct i2c_client *i2c)
 668{
 669        snd_soc_unregister_codec(&i2c->dev);
 670        return 0;
 671}
 672
 673static const struct i2c_device_id wm9090_id[] = {
 674        { "wm9090", 0 },
 675        { "wm9093", 0 },
 676        { }
 677};
 678MODULE_DEVICE_TABLE(i2c, wm9090_id);
 679
 680static struct i2c_driver wm9090_i2c_driver = {
 681        .driver = {
 682                .name = "wm9090",
 683                .owner = THIS_MODULE,
 684        },
 685        .probe = wm9090_i2c_probe,
 686        .remove = wm9090_i2c_remove,
 687        .id_table = wm9090_id,
 688};
 689
 690module_i2c_driver(wm9090_i2c_driver);
 691
 692MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 693MODULE_DESCRIPTION("WM9090 ASoC driver");
 694MODULE_LICENSE("GPL");
 695