linux/arch/arm/mach-davinci/board-dm646x-evm.c
<<
>>
Prefs
   1/*
   2 * TI DaVinci DM646X EVM board
   3 *
   4 * Derived from: arch/arm/mach-davinci/board-evm.c
   5 * Copyright (C) 2006 Texas Instruments.
   6 *
   7 * (C) 2007-2008, MontaVista Software, Inc.
   8 *
   9 * This file is licensed under the terms of the GNU General Public License
  10 * version 2. This program is licensed "as is" without any warranty of any
  11 * kind, whether express or implied.
  12 *
  13 */
  14
  15/**************************************************************************
  16 * Included Files
  17 **************************************************************************/
  18
  19#include <linux/kernel.h>
  20#include <linux/init.h>
  21#include <linux/leds.h>
  22#include <linux/gpio.h>
  23#include <linux/platform_device.h>
  24#include <linux/i2c.h>
  25#include <linux/i2c/at24.h>
  26#include <linux/i2c/pcf857x.h>
  27
  28#include <media/tvp514x.h>
  29#include <media/adv7343.h>
  30
  31#include <linux/mtd/mtd.h>
  32#include <linux/mtd/nand.h>
  33#include <linux/mtd/partitions.h>
  34#include <linux/clk.h>
  35#include <linux/export.h>
  36
  37#include <asm/mach-types.h>
  38#include <asm/mach/arch.h>
  39
  40#include <mach/common.h>
  41#include <mach/serial.h>
  42#include <linux/platform_data/i2c-davinci.h>
  43#include <linux/platform_data/mtd-davinci.h>
  44#include <mach/clock.h>
  45#include <mach/cdce949.h>
  46#include <linux/platform_data/mtd-davinci-aemif.h>
  47
  48#include "davinci.h"
  49#include "clock.h"
  50
  51#define NAND_BLOCK_SIZE         SZ_128K
  52
  53/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
  54 * and U-Boot environment this avoids dependency on any particular combination
  55 * of UBL, U-Boot or flashing tools etc.
  56 */
  57static struct mtd_partition davinci_nand_partitions[] = {
  58        {
  59                /* UBL, U-Boot with environment */
  60                .name           = "bootloader",
  61                .offset         = MTDPART_OFS_APPEND,
  62                .size           = 16 * NAND_BLOCK_SIZE,
  63                .mask_flags     = MTD_WRITEABLE,        /* force read-only */
  64        }, {
  65                .name           = "kernel",
  66                .offset         = MTDPART_OFS_APPEND,
  67                .size           = SZ_4M,
  68                .mask_flags     = 0,
  69        }, {
  70                .name           = "filesystem",
  71                .offset         = MTDPART_OFS_APPEND,
  72                .size           = MTDPART_SIZ_FULL,
  73                .mask_flags     = 0,
  74        }
  75};
  76
  77static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
  78        .wsetup         = 29,
  79        .wstrobe        = 24,
  80        .whold          = 14,
  81        .rsetup         = 19,
  82        .rstrobe        = 33,
  83        .rhold          = 0,
  84        .ta             = 29,
  85};
  86
  87static struct davinci_nand_pdata davinci_nand_data = {
  88        .mask_cle               = 0x80000,
  89        .mask_ale               = 0x40000,
  90        .parts                  = davinci_nand_partitions,
  91        .nr_parts               = ARRAY_SIZE(davinci_nand_partitions),
  92        .ecc_mode               = NAND_ECC_HW,
  93        .ecc_bits               = 1,
  94        .options                = 0,
  95};
  96
  97static struct resource davinci_nand_resources[] = {
  98        {
  99                .start          = DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
 100                .end            = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
 101                .flags          = IORESOURCE_MEM,
 102        }, {
 103                .start          = DM646X_ASYNC_EMIF_CONTROL_BASE,
 104                .end            = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 105                .flags          = IORESOURCE_MEM,
 106        },
 107};
 108
 109static struct platform_device davinci_nand_device = {
 110        .name                   = "davinci_nand",
 111        .id                     = 0,
 112
 113        .num_resources          = ARRAY_SIZE(davinci_nand_resources),
 114        .resource               = davinci_nand_resources,
 115
 116        .dev                    = {
 117                .platform_data  = &davinci_nand_data,
 118        },
 119};
 120
 121#define HAS_ATA         IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 122
 123/* CPLD Register 0 bits to control ATA */
 124#define DM646X_EVM_ATA_RST              BIT(0)
 125#define DM646X_EVM_ATA_PWD              BIT(1)
 126
 127/* CPLD Register 0 Client: used for I/O Control */
 128static int cpld_reg0_probe(struct i2c_client *client,
 129                           const struct i2c_device_id *id)
 130{
 131        if (HAS_ATA) {
 132                u8 data;
 133                struct i2c_msg msg[2] = {
 134                        {
 135                                .addr = client->addr,
 136                                .flags = I2C_M_RD,
 137                                .len = 1,
 138                                .buf = &data,
 139                        },
 140                        {
 141                                .addr = client->addr,
 142                                .flags = 0,
 143                                .len = 1,
 144                                .buf = &data,
 145                        },
 146                };
 147
 148                /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
 149                i2c_transfer(client->adapter, msg, 1);
 150                data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
 151                i2c_transfer(client->adapter, msg + 1, 1);
 152        }
 153
 154        return 0;
 155}
 156
 157static const struct i2c_device_id cpld_reg_ids[] = {
 158        { "cpld_reg0", 0, },
 159        { },
 160};
 161
 162static struct i2c_driver dm6467evm_cpld_driver = {
 163        .driver.name    = "cpld_reg0",
 164        .id_table       = cpld_reg_ids,
 165        .probe          = cpld_reg0_probe,
 166};
 167
 168/* LEDS */
 169
 170static struct gpio_led evm_leds[] = {
 171        { .name = "DS1", .active_low = 1, },
 172        { .name = "DS2", .active_low = 1, },
 173        { .name = "DS3", .active_low = 1, },
 174        { .name = "DS4", .active_low = 1, },
 175};
 176
 177static const struct gpio_led_platform_data evm_led_data = {
 178        .num_leds = ARRAY_SIZE(evm_leds),
 179        .leds     = evm_leds,
 180};
 181
 182static struct platform_device *evm_led_dev;
 183
 184static int evm_led_setup(struct i2c_client *client, int gpio,
 185                        unsigned int ngpio, void *c)
 186{
 187        struct gpio_led *leds = evm_leds;
 188        int status;
 189
 190        while (ngpio--) {
 191                leds->gpio = gpio++;
 192                leds++;
 193        }
 194
 195        evm_led_dev = platform_device_alloc("leds-gpio", 0);
 196        platform_device_add_data(evm_led_dev, &evm_led_data,
 197                                sizeof(evm_led_data));
 198
 199        evm_led_dev->dev.parent = &client->dev;
 200        status = platform_device_add(evm_led_dev);
 201        if (status < 0) {
 202                platform_device_put(evm_led_dev);
 203                evm_led_dev = NULL;
 204        }
 205        return status;
 206}
 207
 208static int evm_led_teardown(struct i2c_client *client, int gpio,
 209                                unsigned ngpio, void *c)
 210{
 211        if (evm_led_dev) {
 212                platform_device_unregister(evm_led_dev);
 213                evm_led_dev = NULL;
 214        }
 215        return 0;
 216}
 217
 218static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
 219
 220static int evm_sw_setup(struct i2c_client *client, int gpio,
 221                        unsigned ngpio, void *c)
 222{
 223        int status;
 224        int i;
 225        char label[10];
 226
 227        for (i = 0; i < 4; ++i) {
 228                snprintf(label, 10, "user_sw%d", i);
 229                status = gpio_request(gpio, label);
 230                if (status)
 231                        goto out_free;
 232                evm_sw_gpio[i] = gpio++;
 233
 234                status = gpio_direction_input(evm_sw_gpio[i]);
 235                if (status) {
 236                        gpio_free(evm_sw_gpio[i]);
 237                        evm_sw_gpio[i] = -EINVAL;
 238                        goto out_free;
 239                }
 240
 241                status = gpio_export(evm_sw_gpio[i], 0);
 242                if (status) {
 243                        gpio_free(evm_sw_gpio[i]);
 244                        evm_sw_gpio[i] = -EINVAL;
 245                        goto out_free;
 246                }
 247        }
 248        return status;
 249out_free:
 250        for (i = 0; i < 4; ++i) {
 251                if (evm_sw_gpio[i] != -EINVAL) {
 252                        gpio_free(evm_sw_gpio[i]);
 253                        evm_sw_gpio[i] = -EINVAL;
 254                }
 255        }
 256        return status;
 257}
 258
 259static int evm_sw_teardown(struct i2c_client *client, int gpio,
 260                        unsigned ngpio, void *c)
 261{
 262        int i;
 263
 264        for (i = 0; i < 4; ++i) {
 265                if (evm_sw_gpio[i] != -EINVAL) {
 266                        gpio_unexport(evm_sw_gpio[i]);
 267                        gpio_free(evm_sw_gpio[i]);
 268                        evm_sw_gpio[i] = -EINVAL;
 269                }
 270        }
 271        return 0;
 272}
 273
 274static int evm_pcf_setup(struct i2c_client *client, int gpio,
 275                        unsigned int ngpio, void *c)
 276{
 277        int status;
 278
 279        if (ngpio < 8)
 280                return -EINVAL;
 281
 282        status = evm_sw_setup(client, gpio, 4, c);
 283        if (status)
 284                return status;
 285
 286        return evm_led_setup(client, gpio+4, 4, c);
 287}
 288
 289static int evm_pcf_teardown(struct i2c_client *client, int gpio,
 290                        unsigned int ngpio, void *c)
 291{
 292        BUG_ON(ngpio < 8);
 293
 294        evm_sw_teardown(client, gpio, 4, c);
 295        evm_led_teardown(client, gpio+4, 4, c);
 296
 297        return 0;
 298}
 299
 300static struct pcf857x_platform_data pcf_data = {
 301        .gpio_base      = DAVINCI_N_GPIO+1,
 302        .setup          = evm_pcf_setup,
 303        .teardown       = evm_pcf_teardown,
 304};
 305
 306/* Most of this EEPROM is unused, but U-Boot uses some data:
 307 *  - 0x7f00, 6 bytes Ethernet Address
 308 *  - ... newer boards may have more
 309 */
 310
 311static struct at24_platform_data eeprom_info = {
 312        .byte_len       = (256*1024) / 8,
 313        .page_size      = 64,
 314        .flags          = AT24_FLAG_ADDR16,
 315        .setup          = davinci_get_mac_addr,
 316        .context        = (void *)0x7f00,
 317};
 318
 319static u8 dm646x_iis_serializer_direction[] = {
 320       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
 321};
 322
 323static u8 dm646x_dit_serializer_direction[] = {
 324       TX_MODE,
 325};
 326
 327static struct snd_platform_data dm646x_evm_snd_data[] = {
 328        {
 329                .tx_dma_offset  = 0x400,
 330                .rx_dma_offset  = 0x400,
 331                .op_mode        = DAVINCI_MCASP_IIS_MODE,
 332                .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
 333                .tdm_slots      = 2,
 334                .serial_dir     = dm646x_iis_serializer_direction,
 335                .asp_chan_q     = EVENTQ_0,
 336        },
 337        {
 338                .tx_dma_offset  = 0x400,
 339                .rx_dma_offset  = 0,
 340                .op_mode        = DAVINCI_MCASP_DIT_MODE,
 341                .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
 342                .tdm_slots      = 32,
 343                .serial_dir     = dm646x_dit_serializer_direction,
 344                .asp_chan_q     = EVENTQ_0,
 345        },
 346};
 347
 348static struct i2c_client *cpld_client;
 349
 350static int cpld_video_probe(struct i2c_client *client,
 351                        const struct i2c_device_id *id)
 352{
 353        cpld_client = client;
 354        return 0;
 355}
 356
 357static int cpld_video_remove(struct i2c_client *client)
 358{
 359        cpld_client = NULL;
 360        return 0;
 361}
 362
 363static const struct i2c_device_id cpld_video_id[] = {
 364        { "cpld_video", 0 },
 365        { }
 366};
 367
 368static struct i2c_driver cpld_video_driver = {
 369        .driver = {
 370                .name   = "cpld_video",
 371        },
 372        .probe          = cpld_video_probe,
 373        .remove         = cpld_video_remove,
 374        .id_table       = cpld_video_id,
 375};
 376
 377static void evm_init_cpld(void)
 378{
 379        i2c_add_driver(&cpld_video_driver);
 380}
 381
 382static struct i2c_board_info __initdata i2c_info[] =  {
 383        {
 384                I2C_BOARD_INFO("24c256", 0x50),
 385                .platform_data  = &eeprom_info,
 386        },
 387        {
 388                I2C_BOARD_INFO("pcf8574a", 0x38),
 389                .platform_data  = &pcf_data,
 390        },
 391        {
 392                I2C_BOARD_INFO("cpld_reg0", 0x3a),
 393        },
 394        {
 395                I2C_BOARD_INFO("tlv320aic33", 0x18),
 396        },
 397        {
 398                I2C_BOARD_INFO("cpld_video", 0x3b),
 399        },
 400        {
 401                I2C_BOARD_INFO("cdce949", 0x6c),
 402        },
 403};
 404
 405static struct davinci_i2c_platform_data i2c_pdata = {
 406        .bus_freq       = 100 /* kHz */,
 407        .bus_delay      = 0 /* usec */,
 408};
 409
 410#define VCH2CLK_MASK            (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
 411#define VCH2CLK_SYSCLK8         (BIT(9))
 412#define VCH2CLK_AUXCLK          (BIT(9) | BIT(8))
 413#define VCH3CLK_MASK            (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
 414#define VCH3CLK_SYSCLK8         (BIT(13))
 415#define VCH3CLK_AUXCLK          (BIT(14) | BIT(13))
 416
 417#define VIDCH2CLK               (BIT(10))
 418#define VIDCH3CLK               (BIT(11))
 419#define VIDCH1CLK               (BIT(4))
 420#define TVP7002_INPUT           (BIT(4))
 421#define TVP5147_INPUT           (~BIT(4))
 422#define VPIF_INPUT_ONE_CHANNEL  (BIT(5))
 423#define VPIF_INPUT_TWO_CHANNEL  (~BIT(5))
 424#define TVP5147_CH0             "tvp514x-0"
 425#define TVP5147_CH1             "tvp514x-1"
 426
 427/* spin lock for updating above registers */
 428static spinlock_t vpif_reg_lock;
 429
 430static int set_vpif_clock(int mux_mode, int hd)
 431{
 432        unsigned long flags;
 433        unsigned int value;
 434        int val = 0;
 435        int err = 0;
 436
 437        if (!cpld_client)
 438                return -ENXIO;
 439
 440        /* disable the clock */
 441        spin_lock_irqsave(&vpif_reg_lock, flags);
 442        value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 443        value |= (VIDCH3CLK | VIDCH2CLK);
 444        __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 445        spin_unlock_irqrestore(&vpif_reg_lock, flags);
 446
 447        val = i2c_smbus_read_byte(cpld_client);
 448        if (val < 0)
 449                return val;
 450
 451        if (mux_mode == 1)
 452                val &= ~0x40;
 453        else
 454                val |= 0x40;
 455
 456        err = i2c_smbus_write_byte(cpld_client, val);
 457        if (err)
 458                return err;
 459
 460        value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 461        value &= ~(VCH2CLK_MASK);
 462        value &= ~(VCH3CLK_MASK);
 463
 464        if (hd >= 1)
 465                value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
 466        else
 467                value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
 468
 469        __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 470
 471        spin_lock_irqsave(&vpif_reg_lock, flags);
 472        value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 473        /* enable the clock */
 474        value &= ~(VIDCH3CLK | VIDCH2CLK);
 475        __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 476        spin_unlock_irqrestore(&vpif_reg_lock, flags);
 477
 478        return 0;
 479}
 480
 481static struct vpif_subdev_info dm646x_vpif_subdev[] = {
 482        {
 483                .name   = "adv7343",
 484                .board_info = {
 485                        I2C_BOARD_INFO("adv7343", 0x2a),
 486                },
 487        },
 488        {
 489                .name   = "ths7303",
 490                .board_info = {
 491                        I2C_BOARD_INFO("ths7303", 0x2c),
 492                },
 493        },
 494};
 495
 496static const struct vpif_output dm6467_ch0_outputs[] = {
 497        {
 498                .output = {
 499                        .index = 0,
 500                        .name = "Composite",
 501                        .type = V4L2_OUTPUT_TYPE_ANALOG,
 502                        .capabilities = V4L2_OUT_CAP_STD,
 503                        .std = V4L2_STD_ALL,
 504                },
 505                .subdev_name = "adv7343",
 506                .output_route = ADV7343_COMPOSITE_ID,
 507        },
 508        {
 509                .output = {
 510                        .index = 1,
 511                        .name = "Component",
 512                        .type = V4L2_OUTPUT_TYPE_ANALOG,
 513                        .capabilities = V4L2_OUT_CAP_DV_TIMINGS,
 514                },
 515                .subdev_name = "adv7343",
 516                .output_route = ADV7343_COMPONENT_ID,
 517        },
 518        {
 519                .output = {
 520                        .index = 2,
 521                        .name = "S-Video",
 522                        .type = V4L2_OUTPUT_TYPE_ANALOG,
 523                        .capabilities = V4L2_OUT_CAP_STD,
 524                        .std = V4L2_STD_ALL,
 525                },
 526                .subdev_name = "adv7343",
 527                .output_route = ADV7343_SVIDEO_ID,
 528        },
 529};
 530
 531static struct vpif_display_config dm646x_vpif_display_config = {
 532        .set_clock      = set_vpif_clock,
 533        .subdevinfo     = dm646x_vpif_subdev,
 534        .subdev_count   = ARRAY_SIZE(dm646x_vpif_subdev),
 535        .chan_config[0] = {
 536                .outputs = dm6467_ch0_outputs,
 537                .output_count = ARRAY_SIZE(dm6467_ch0_outputs),
 538        },
 539        .card_name      = "DM646x EVM",
 540};
 541
 542/**
 543 * setup_vpif_input_path()
 544 * @channel: channel id (0 - CH0, 1 - CH1)
 545 * @sub_dev_name: ptr sub device name
 546 *
 547 * This will set vpif input to capture data from tvp514x or
 548 * tvp7002.
 549 */
 550static int setup_vpif_input_path(int channel, const char *sub_dev_name)
 551{
 552        int err = 0;
 553        int val;
 554
 555        /* for channel 1, we don't do anything */
 556        if (channel != 0)
 557                return 0;
 558
 559        if (!cpld_client)
 560                return -ENXIO;
 561
 562        val = i2c_smbus_read_byte(cpld_client);
 563        if (val < 0)
 564                return val;
 565
 566        if (!strcmp(sub_dev_name, TVP5147_CH0) ||
 567            !strcmp(sub_dev_name, TVP5147_CH1))
 568                val &= TVP5147_INPUT;
 569        else
 570                val |= TVP7002_INPUT;
 571
 572        err = i2c_smbus_write_byte(cpld_client, val);
 573        if (err)
 574                return err;
 575        return 0;
 576}
 577
 578/**
 579 * setup_vpif_input_channel_mode()
 580 * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
 581 *
 582 * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
 583 */
 584static int setup_vpif_input_channel_mode(int mux_mode)
 585{
 586        unsigned long flags;
 587        int err = 0;
 588        int val;
 589        u32 value;
 590
 591        if (!cpld_client)
 592                return -ENXIO;
 593
 594        val = i2c_smbus_read_byte(cpld_client);
 595        if (val < 0)
 596                return val;
 597
 598        spin_lock_irqsave(&vpif_reg_lock, flags);
 599        value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 600        if (mux_mode) {
 601                val &= VPIF_INPUT_TWO_CHANNEL;
 602                value |= VIDCH1CLK;
 603        } else {
 604                val |= VPIF_INPUT_ONE_CHANNEL;
 605                value &= ~VIDCH1CLK;
 606        }
 607        __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 608        spin_unlock_irqrestore(&vpif_reg_lock, flags);
 609
 610        err = i2c_smbus_write_byte(cpld_client, val);
 611        if (err)
 612                return err;
 613
 614        return 0;
 615}
 616
 617static struct tvp514x_platform_data tvp5146_pdata = {
 618        .clk_polarity = 0,
 619        .hs_polarity = 1,
 620        .vs_polarity = 1
 621};
 622
 623#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
 624
 625static struct vpif_subdev_info vpif_capture_sdev_info[] = {
 626        {
 627                .name   = TVP5147_CH0,
 628                .board_info = {
 629                        I2C_BOARD_INFO("tvp5146", 0x5d),
 630                        .platform_data = &tvp5146_pdata,
 631                },
 632        },
 633        {
 634                .name   = TVP5147_CH1,
 635                .board_info = {
 636                        I2C_BOARD_INFO("tvp5146", 0x5c),
 637                        .platform_data = &tvp5146_pdata,
 638                },
 639        },
 640};
 641
 642static const struct vpif_input dm6467_ch0_inputs[] = {
 643        {
 644                .input = {
 645                        .index = 0,
 646                        .name = "Composite",
 647                        .type = V4L2_INPUT_TYPE_CAMERA,
 648                        .capabilities = V4L2_IN_CAP_STD,
 649                        .std = TVP514X_STD_ALL,
 650                },
 651                .subdev_name = TVP5147_CH0,
 652                .input_route = INPUT_CVBS_VI2B,
 653                .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 654        },
 655};
 656
 657static const struct vpif_input dm6467_ch1_inputs[] = {
 658       {
 659                .input = {
 660                        .index = 0,
 661                        .name = "S-Video",
 662                        .type = V4L2_INPUT_TYPE_CAMERA,
 663                        .capabilities = V4L2_IN_CAP_STD,
 664                        .std = TVP514X_STD_ALL,
 665                },
 666                .subdev_name = TVP5147_CH1,
 667                .input_route = INPUT_SVIDEO_VI2C_VI1C,
 668                .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 669        },
 670};
 671
 672static struct vpif_capture_config dm646x_vpif_capture_cfg = {
 673        .setup_input_path = setup_vpif_input_path,
 674        .setup_input_channel_mode = setup_vpif_input_channel_mode,
 675        .subdev_info = vpif_capture_sdev_info,
 676        .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
 677        .chan_config[0] = {
 678                .inputs = dm6467_ch0_inputs,
 679                .input_count = ARRAY_SIZE(dm6467_ch0_inputs),
 680                .vpif_if = {
 681                        .if_type = VPIF_IF_BT656,
 682                        .hd_pol = 1,
 683                        .vd_pol = 1,
 684                        .fid_pol = 0,
 685                },
 686        },
 687        .chan_config[1] = {
 688                .inputs = dm6467_ch1_inputs,
 689                .input_count = ARRAY_SIZE(dm6467_ch1_inputs),
 690                .vpif_if = {
 691                        .if_type = VPIF_IF_BT656,
 692                        .hd_pol = 1,
 693                        .vd_pol = 1,
 694                        .fid_pol = 0,
 695                },
 696        },
 697};
 698
 699static void __init evm_init_video(void)
 700{
 701        spin_lock_init(&vpif_reg_lock);
 702
 703        dm646x_setup_vpif(&dm646x_vpif_display_config,
 704                          &dm646x_vpif_capture_cfg);
 705}
 706
 707static void __init evm_init_i2c(void)
 708{
 709        davinci_init_i2c(&i2c_pdata);
 710        i2c_add_driver(&dm6467evm_cpld_driver);
 711        i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 712        evm_init_cpld();
 713        evm_init_video();
 714}
 715
 716#define CDCE949_XIN_RATE        27000000
 717
 718/* CDCE949 support - "lpsc" field is overridden to work as clock number */
 719static struct clk cdce_clk_in = {
 720        .name   = "cdce_xin",
 721        .rate   = CDCE949_XIN_RATE,
 722};
 723
 724static struct clk_lookup cdce_clks[] = {
 725        CLK(NULL, "xin", &cdce_clk_in),
 726        CLK(NULL, NULL, NULL),
 727};
 728
 729static void __init cdce_clk_init(void)
 730{
 731        struct clk_lookup *c;
 732        struct clk *clk;
 733
 734        for (c = cdce_clks; c->clk; c++) {
 735                clk = c->clk;
 736                clkdev_add(c);
 737                clk_register(clk);
 738        }
 739}
 740
 741#define DM6467T_EVM_REF_FREQ            33000000
 742
 743static void __init davinci_map_io(void)
 744{
 745        dm646x_init();
 746
 747        if (machine_is_davinci_dm6467tevm())
 748                davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
 749
 750        cdce_clk_init();
 751}
 752
 753static struct davinci_uart_config uart_config __initdata = {
 754        .enabled_uarts = (1 << 0),
 755};
 756
 757#define DM646X_EVM_PHY_ID               "davinci_mdio-0:01"
 758/*
 759 * The following EDMA channels/slots are not being used by drivers (for
 760 * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
 761 * reserved for codecs on the DSP side.
 762 */
 763static const s16 dm646x_dma_rsv_chans[][2] = {
 764        /* (offset, number) */
 765        { 0,  4},
 766        {13,  3},
 767        {24,  4},
 768        {30,  2},
 769        {54,  3},
 770        {-1, -1}
 771};
 772
 773static const s16 dm646x_dma_rsv_slots[][2] = {
 774        /* (offset, number) */
 775        { 0,  4},
 776        {13,  3},
 777        {24,  4},
 778        {30,  2},
 779        {54,  3},
 780        {128, 384},
 781        {-1, -1}
 782};
 783
 784static struct edma_rsv_info dm646x_edma_rsv[] = {
 785        {
 786                .rsv_chans      = dm646x_dma_rsv_chans,
 787                .rsv_slots      = dm646x_dma_rsv_slots,
 788        },
 789};
 790
 791static __init void evm_init(void)
 792{
 793        struct davinci_soc_info *soc_info = &davinci_soc_info;
 794
 795        evm_init_i2c();
 796        davinci_serial_init(&uart_config);
 797        dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 798        dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 799
 800        if (machine_is_davinci_dm6467tevm())
 801                davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
 802
 803        platform_device_register(&davinci_nand_device);
 804
 805        dm646x_init_edma(dm646x_edma_rsv);
 806
 807        if (HAS_ATA)
 808                davinci_init_ide();
 809
 810        soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
 811}
 812
 813MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 814        .atag_offset  = 0x100,
 815        .map_io       = davinci_map_io,
 816        .init_irq     = davinci_irq_init,
 817        .init_time      = davinci_timer_init,
 818        .init_machine = evm_init,
 819        .init_late      = davinci_init_late,
 820        .dma_zone_size  = SZ_128M,
 821        .restart        = davinci_restart,
 822MACHINE_END
 823
 824MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 825        .atag_offset  = 0x100,
 826        .map_io       = davinci_map_io,
 827        .init_irq     = davinci_irq_init,
 828        .init_time      = davinci_timer_init,
 829        .init_machine = evm_init,
 830        .init_late      = davinci_init_late,
 831        .dma_zone_size  = SZ_128M,
 832        .restart        = davinci_restart,
 833MACHINE_END
 834
 835