1
2
3
4
5
6
7
8
9
10
11
12
13
14
15#include <linux/delay.h>
16#include <linux/dma-mapping.h>
17#include <linux/gfp.h>
18#include <linux/gpio.h>
19#include <linux/init.h>
20#include <linux/interrupt.h>
21#include <linux/moduleparam.h>
22#include <linux/leds.h>
23#include <linux/memory.h>
24#include <linux/mtd/physmap.h>
25#include <linux/mtd/partitions.h>
26#include <linux/platform_device.h>
27#include <linux/regulator/machine.h>
28#include <linux/mfd/mc13783.h>
29#include <linux/spi/spi.h>
30#include <linux/types.h>
31#include <linux/memblock.h>
32#include <linux/clk.h>
33#include <linux/io.h>
34#include <linux/err.h>
35#include <linux/input.h>
36
37#include <linux/usb/otg.h>
38#include <linux/usb/ulpi.h>
39
40#include <asm/mach-types.h>
41#include <asm/mach/arch.h>
42#include <asm/mach/time.h>
43#include <asm/mach/map.h>
44#include <asm/memblock.h>
45#include <linux/platform_data/asoc-imx-ssi.h>
46
47#include "board-mx31moboard.h"
48#include "common.h"
49#include "devices-imx31.h"
50#include "hardware.h"
51#include "iomux-mx3.h"
52#include "ulpi.h"
53
54static unsigned int moboard_pins[] = {
55
56 MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
57 MX31_PIN_CTS1__GPIO2_7,
58
59 MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
60 MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
61
62 MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
63
64 MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
65
66 MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
67 MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
68 MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
69 MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
70
71 MX31_PIN_GPIO1_0__GPIO1_0,
72
73 MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
74 MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
75 MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
76 MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
77 MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
78 MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
79 MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
80 MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
81 MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
82 MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
83 MX31_PIN_USB_OC__GPIO1_30,
84
85 MX31_PIN_USBH2_DATA0__USBH2_DATA0,
86 MX31_PIN_USBH2_DATA1__USBH2_DATA1,
87 MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
88 MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
89 MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
90 MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
91 MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
92 MX31_PIN_SCK6__GPIO1_25,
93
94 MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
95 MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
96
97 MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
98 MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
99 MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
100
101 MX31_PIN_GPIO1_3__GPIO1_3,
102
103 MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
104 MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
105 MX31_PIN_CSPI2_SS1__CSPI3_SS1,
106
107 MX31_PIN_STXD4__STXD4, MX31_PIN_SRXD4__SRXD4,
108 MX31_PIN_SCK4__SCK4, MX31_PIN_SFS4__SFS4,
109};
110
111static struct physmap_flash_data mx31moboard_flash_data = {
112 .width = 2,
113};
114
115static struct resource mx31moboard_flash_resource = {
116 .start = 0xa0000000,
117 .end = 0xa1ffffff,
118 .flags = IORESOURCE_MEM,
119};
120
121static struct platform_device mx31moboard_flash = {
122 .name = "physmap-flash",
123 .id = 0,
124 .dev = {
125 .platform_data = &mx31moboard_flash_data,
126 },
127 .resource = &mx31moboard_flash_resource,
128 .num_resources = 1,
129};
130
131static int moboard_uart0_init(struct platform_device *pdev)
132{
133 int ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
134 if (ret)
135 return ret;
136
137 ret = gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
138 if (ret)
139 gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
140
141 return ret;
142}
143
144static void moboard_uart0_exit(struct platform_device *pdev)
145{
146 gpio_free(IOMUX_TO_GPIO(MX31_PIN_CTS1));
147}
148
149static const struct imxuart_platform_data uart0_pdata __initconst = {
150 .init = moboard_uart0_init,
151 .exit = moboard_uart0_exit,
152};
153
154static const struct imxuart_platform_data uart4_pdata __initconst = {
155 .flags = IMXUART_HAVE_RTSCTS,
156};
157
158static const struct imxi2c_platform_data moboard_i2c0_data __initconst = {
159 .bitrate = 400000,
160};
161
162static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
163 .bitrate = 100000,
164};
165
166static int moboard_spi1_cs[] = {
167 MXC_SPI_CS(0),
168 MXC_SPI_CS(2),
169};
170
171static const struct spi_imx_master moboard_spi1_pdata __initconst = {
172 .chipselect = moboard_spi1_cs,
173 .num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
174};
175
176static struct regulator_consumer_supply sdhc_consumers[] = {
177 {
178 .dev_name = "imx31-mmc.0",
179 .supply = "sdhc0_vcc",
180 },
181 {
182 .dev_name = "imx31-mmc.1",
183 .supply = "sdhc1_vcc",
184 },
185};
186
187static struct regulator_init_data sdhc_vreg_data = {
188 .constraints = {
189 .min_uV = 2700000,
190 .max_uV = 3000000,
191 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
192 REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
193 .valid_modes_mask = REGULATOR_MODE_NORMAL |
194 REGULATOR_MODE_FAST,
195 .always_on = 0,
196 .boot_on = 1,
197 },
198 .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
199 .consumer_supplies = sdhc_consumers,
200};
201
202static struct regulator_consumer_supply cam_consumers[] = {
203 {
204 .dev_name = "mx3_camera.0",
205 .supply = "cam_vcc",
206 },
207};
208
209static struct regulator_init_data cam_vreg_data = {
210 .constraints = {
211 .min_uV = 2700000,
212 .max_uV = 3000000,
213 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
214 REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
215 .valid_modes_mask = REGULATOR_MODE_NORMAL |
216 REGULATOR_MODE_FAST,
217 .always_on = 0,
218 .boot_on = 1,
219 },
220 .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
221 .consumer_supplies = cam_consumers,
222};
223
224static struct mc13xxx_regulator_init_data moboard_regulators[] = {
225 {
226 .id = MC13783_REG_VMMC1,
227 .init_data = &sdhc_vreg_data,
228 },
229 {
230 .id = MC13783_REG_VCAM,
231 .init_data = &cam_vreg_data,
232 },
233};
234
235static struct mc13xxx_led_platform_data moboard_led[] = {
236 {
237 .id = MC13783_LED_R1,
238 .name = "coreboard-led-4:red",
239 .max_current = 2,
240 },
241 {
242 .id = MC13783_LED_G1,
243 .name = "coreboard-led-4:green",
244 .max_current = 2,
245 },
246 {
247 .id = MC13783_LED_B1,
248 .name = "coreboard-led-4:blue",
249 .max_current = 2,
250 },
251 {
252 .id = MC13783_LED_R2,
253 .name = "coreboard-led-5:red",
254 .max_current = 3,
255 },
256 {
257 .id = MC13783_LED_G2,
258 .name = "coreboard-led-5:green",
259 .max_current = 3,
260 },
261 {
262 .id = MC13783_LED_B2,
263 .name = "coreboard-led-5:blue",
264 .max_current = 3,
265 },
266};
267
268static struct mc13xxx_leds_platform_data moboard_leds = {
269 .num_leds = ARRAY_SIZE(moboard_led),
270 .led = moboard_led,
271 .led_control[0] = MC13783_LED_C0_ENABLE | MC13783_LED_C0_ABMODE(0),
272 .led_control[1] = MC13783_LED_C1_SLEWLIM,
273 .led_control[2] = MC13783_LED_C2_SLEWLIM,
274 .led_control[3] = MC13783_LED_C3_PERIOD(0),
275 .led_control[4] = MC13783_LED_C3_PERIOD(0),
276};
277
278static struct mc13xxx_buttons_platform_data moboard_buttons = {
279 .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
280 MC13783_BUTTON_POL_INVERT,
281 .b1on_key = KEY_POWER,
282};
283
284static struct mc13xxx_codec_platform_data moboard_codec = {
285 .dac_ssi_port = MC13783_SSI1_PORT,
286 .adc_ssi_port = MC13783_SSI1_PORT,
287};
288
289static struct mc13xxx_platform_data moboard_pmic = {
290 .regulators = {
291 .regulators = moboard_regulators,
292 .num_regulators = ARRAY_SIZE(moboard_regulators),
293 },
294 .leds = &moboard_leds,
295 .buttons = &moboard_buttons,
296 .codec = &moboard_codec,
297 .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC | MC13XXX_USE_CODEC,
298};
299
300static struct imx_ssi_platform_data moboard_ssi_pdata = {
301 .flags = IMX_SSI_DMA | IMX_SSI_NET,
302};
303
304static struct spi_board_info moboard_spi_board_info[] __initdata = {
305 {
306 .modalias = "mc13783",
307
308 .max_speed_hz = 300000,
309 .bus_num = 1,
310 .chip_select = 0,
311 .platform_data = &moboard_pmic,
312 .mode = SPI_CS_HIGH,
313 },
314};
315
316static int moboard_spi2_cs[] = {
317 MXC_SPI_CS(1),
318};
319
320static const struct spi_imx_master moboard_spi2_pdata __initconst = {
321 .chipselect = moboard_spi2_cs,
322 .num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
323};
324
325#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
326#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
327
328static int moboard_sdhc1_get_ro(struct device *dev)
329{
330 return !gpio_get_value(SDHC1_WP);
331}
332
333static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
334 void *data)
335{
336 int ret;
337
338 ret = gpio_request(SDHC1_CD, "sdhc-detect");
339 if (ret)
340 return ret;
341
342 gpio_direction_input(SDHC1_CD);
343
344 ret = gpio_request(SDHC1_WP, "sdhc-wp");
345 if (ret)
346 goto err_gpio_free;
347 gpio_direction_input(SDHC1_WP);
348
349 ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
350 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
351 "sdhc1-card-detect", data);
352 if (ret)
353 goto err_gpio_free_2;
354
355 return 0;
356
357err_gpio_free_2:
358 gpio_free(SDHC1_WP);
359err_gpio_free:
360 gpio_free(SDHC1_CD);
361
362 return ret;
363}
364
365static void moboard_sdhc1_exit(struct device *dev, void *data)
366{
367 free_irq(gpio_to_irq(SDHC1_CD), data);
368 gpio_free(SDHC1_WP);
369 gpio_free(SDHC1_CD);
370}
371
372static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
373 .get_ro = moboard_sdhc1_get_ro,
374 .init = moboard_sdhc1_init,
375 .exit = moboard_sdhc1_exit,
376};
377
378
379
380
381#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
382#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
383 PAD_CTL_ODE_CMOS)
384
385#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
386#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
387
388static void usb_xcvr_reset(void)
389{
390 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
391 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
392 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
393 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
394 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
395 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
396 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
397 mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
398 mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
399 mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
400 mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
401 mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
402
403 mxc_iomux_set_gpr(MUX_PGP_UH2, true);
404 mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
405 mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
406 mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
407 mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
408 mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
409 mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
410 mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
411 mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
412 mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
413 mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
414 mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
415 mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
416
417 gpio_request(OTG_EN_B, "usb-udc-en");
418 gpio_direction_output(OTG_EN_B, 0);
419 gpio_request(USBH2_EN_B, "usbh2-en");
420 gpio_direction_output(USBH2_EN_B, 0);
421
422 gpio_request(USB_RESET_B, "usb-reset");
423 gpio_direction_output(USB_RESET_B, 0);
424 mdelay(1);
425 gpio_set_value(USB_RESET_B, 1);
426 mdelay(1);
427}
428
429static int moboard_usbh2_init_hw(struct platform_device *pdev)
430{
431 return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
432}
433
434static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
435 .init = moboard_usbh2_init_hw,
436 .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
437};
438
439static int __init moboard_usbh2_init(void)
440{
441 struct platform_device *pdev;
442
443 usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
444 ULPI_OTG_DRVVBUS_EXT);
445 if (!usbh2_pdata.otg)
446 return -ENODEV;
447
448 pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
449 if (IS_ERR(pdev))
450 return PTR_ERR(pdev);
451
452 return 0;
453}
454
455static const struct gpio_led mx31moboard_leds[] __initconst = {
456 {
457 .name = "coreboard-led-0:red:running",
458 .default_trigger = "heartbeat",
459 .gpio = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
460 }, {
461 .name = "coreboard-led-1:red",
462 .gpio = IOMUX_TO_GPIO(MX31_PIN_STX0),
463 }, {
464 .name = "coreboard-led-2:red",
465 .gpio = IOMUX_TO_GPIO(MX31_PIN_SRX0),
466 }, {
467 .name = "coreboard-led-3:red",
468 .gpio = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
469 },
470};
471
472static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
473 .num_leds = ARRAY_SIZE(mx31moboard_leds),
474 .leds = mx31moboard_leds,
475};
476
477static struct platform_device *devices[] __initdata = {
478 &mx31moboard_flash,
479};
480
481static struct mx3_camera_pdata camera_pdata __initdata = {
482 .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
483 .mclk_10khz = 4800,
484};
485
486static phys_addr_t mx3_camera_base __initdata;
487#define MX3_CAMERA_BUF_SIZE SZ_4M
488
489static int __init mx31moboard_init_cam(void)
490{
491 int dma, ret = -ENOMEM;
492 struct platform_device *pdev;
493
494 imx31_add_ipu_core();
495
496 pdev = imx31_alloc_mx3_camera(&camera_pdata);
497 if (IS_ERR(pdev))
498 return PTR_ERR(pdev);
499
500 dma = dma_declare_coherent_memory(&pdev->dev,
501 mx3_camera_base, mx3_camera_base,
502 MX3_CAMERA_BUF_SIZE,
503 DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
504 if (!(dma & DMA_MEMORY_MAP))
505 goto err;
506
507 ret = platform_device_add(pdev);
508 if (ret)
509err:
510 platform_device_put(pdev);
511
512 return ret;
513
514}
515
516static void mx31moboard_poweroff(void)
517{
518 struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
519
520 if (!IS_ERR(clk))
521 clk_prepare_enable(clk);
522
523 mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
524
525 __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
526}
527
528static int mx31moboard_baseboard;
529core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
530
531
532
533
534static void __init mx31moboard_init(void)
535{
536 imx31_soc_init();
537
538 mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
539 "moboard");
540
541 platform_add_devices(devices, ARRAY_SIZE(devices));
542 gpio_led_register_device(-1, &mx31moboard_led_pdata);
543
544 imx31_add_imx2_wdt();
545
546 imx31_add_imx_uart0(&uart0_pdata);
547 imx31_add_imx_uart4(&uart4_pdata);
548
549 imx31_add_imx_i2c0(&moboard_i2c0_data);
550 imx31_add_imx_i2c1(&moboard_i2c1_data);
551
552 imx31_add_spi_imx1(&moboard_spi1_pdata);
553 imx31_add_spi_imx2(&moboard_spi2_pdata);
554
555 gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
556 gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
557 moboard_spi_board_info[0].irq =
558 gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
559 spi_register_board_info(moboard_spi_board_info,
560 ARRAY_SIZE(moboard_spi_board_info));
561
562 imx31_add_mxc_mmc(0, &sdhc1_pdata);
563
564 mx31moboard_init_cam();
565
566 usb_xcvr_reset();
567
568 moboard_usbh2_init();
569
570 imx31_add_imx_ssi(0, &moboard_ssi_pdata);
571
572 imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
573
574 pm_power_off = mx31moboard_poweroff;
575
576 switch (mx31moboard_baseboard) {
577 case MX31NOBOARD:
578 break;
579 case MX31DEVBOARD:
580 mx31moboard_devboard_init();
581 break;
582 case MX31MARXBOT:
583 mx31moboard_marxbot_init();
584 break;
585 case MX31SMARTBOT:
586 case MX31EYEBOT:
587 mx31moboard_smartbot_init(mx31moboard_baseboard);
588 break;
589 default:
590 printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
591 mx31moboard_baseboard);
592 }
593}
594
595static void __init mx31moboard_timer_init(void)
596{
597 mx31_clocks_init(26000000);
598}
599
600static void __init mx31moboard_reserve(void)
601{
602
603 mx3_camera_base = arm_memblock_steal(MX3_CAMERA_BUF_SIZE,
604 MX3_CAMERA_BUF_SIZE);
605}
606
607MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
608
609 .atag_offset = 0x100,
610 .reserve = mx31moboard_reserve,
611 .map_io = mx31_map_io,
612 .init_early = imx31_init_early,
613 .init_irq = mx31_init_irq,
614 .handle_irq = imx31_handle_irq,
615 .init_time = mx31moboard_timer_init,
616 .init_machine = mx31moboard_init,
617 .restart = mxc_restart,
618MACHINE_END
619
