LXR linux/arch/arm/mach-lpc32xx/timer.c

   1/*
   2 * arch/arm/mach-lpc32xx/timer.c
   3 *
   4 * Author: Kevin Wells <kevin.wells@nxp.com>
   5 *
   6 * Copyright (C) 2009 - 2010 NXP Semiconductors
   7 * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
   8 *                    Ed Schouten <e.schouten@fontys.nl>
   9 *                    Laurens Timmermans <l.timmermans@fontys.nl>
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2 of the License, or
  14 * (at your option) any later version.
  15 *
  16 * This program is distributed in the hope that it will be useful,
  17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19 * GNU General Public License for more details.
  20 */
  21
  22#include <linux/interrupt.h>
  23#include <linux/irq.h>
  24#include <linux/time.h>
  25#include <linux/err.h>
  26#include <linux/clockchips.h>
  27
  28#include <asm/mach/time.h>
  29
  30#include <mach/hardware.h>
  31#include <mach/platform.h>
  32#include "common.h"
  33
  34static int lpc32xx_clkevt_next_event(unsigned long delta,
  35    struct clock_event_device *dev)
  36{
  37        __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
  38                LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
  39        __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
  40        __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
  41                LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
  42
  43        return 0;
  44}
  45
  46static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
  47    struct clock_event_device *dev)
  48{
  49        switch (mode) {
  50        case CLOCK_EVT_MODE_PERIODIC:
  51                WARN_ON(1);
  52                break;
  53
  54        case CLOCK_EVT_MODE_ONESHOT:
  55        case CLOCK_EVT_MODE_SHUTDOWN:
  56                /*
  57                 * Disable the timer. When using oneshot, we must also
  58                 * disable the timer to wait for the first call to
  59                 * set_next_event().
  60                 */
  61                __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
  62                break;
  63
  64        case CLOCK_EVT_MODE_UNUSED:
  65        case CLOCK_EVT_MODE_RESUME:
  66                break;
  67        }
  68}
  69
  70static struct clock_event_device lpc32xx_clkevt = {
  71        .name           = "lpc32xx_clkevt",
  72        .features       = CLOCK_EVT_FEAT_ONESHOT,
  73        .rating         = 300,
  74        .set_next_event = lpc32xx_clkevt_next_event,
  75        .set_mode       = lpc32xx_clkevt_mode,
  76};
  77
  78static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
  79{
  80        struct clock_event_device *evt = &lpc32xx_clkevt;
  81
  82        /* Clear match */
  83        __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
  84                LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
  85
  86        evt->event_handler(evt);
  87
  88        return IRQ_HANDLED;
  89}
  90
  91static struct irqaction lpc32xx_timer_irq = {
  92        .name           = "LPC32XX Timer Tick",
  93        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
  94        .handler        = lpc32xx_timer_interrupt,
  95};
  96
  97/*
  98 * The clock management driver isn't initialized at this point, so the
  99 * clocks need to be enabled here manually and then tagged as used in
 100 * the clock driver initialization
 101 */
 102void __init lpc32xx_timer_init(void)
 103{
 104        u32 clkrate, pllreg;
 105
 106        /* Enable timer clock */
 107        __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
 108                LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
 109                LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
 110
 111        /*
 112         * The clock driver isn't initialized at this point. So determine if
 113         * the SYSCLK is driven from the PLL397 or main oscillator and then use
 114         * it to compute the PLL frequency and the PCLK divider to get the base
 115         * timer rates. This rate is needed to compute the tick rate.
 116         */
 117        if (clk_is_sysclk_mainosc() != 0)
 118                clkrate = LPC32XX_MAIN_OSC_FREQ;
 119        else
 120                clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
 121
 122        /* Get ARM HCLKPLL register and convert it into a frequency */
 123        pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
 124        clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
 125
 126        /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
 127        clkrate = clkrate / clk_get_pclk_div();
 128
 129        /* Initial timer setup */
 130        __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
 131        __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
 132                LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
 133        __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
 134        __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
 135                LPC32XX_TIMER_CNTR_MCR_STOP(0) |
 136                LPC32XX_TIMER_CNTR_MCR_RESET(0),
 137                LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
 138
 139        /* Setup tick interrupt */
 140        setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
 141
 142        /* Setup the clockevent structure. */
 143        lpc32xx_clkevt.cpumask = cpumask_of(0);
 144        clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
 145
 146        /* Use timer1 as clock source. */
 147        __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
 148                LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
 149        __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
 150        __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
 151        __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
 152                LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
 153
 154        clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
 155                "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
 156}
 157