linux/arch/arm/mach-omap2/board-h4.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-omap2/board-h4.c
   3 *
   4 * Copyright (C) 2005 Nokia Corporation
   5 * Author: Paul Mundt <paul.mundt@nokia.com>
   6 *
   7 * Modified from mach-omap/omap1/board-generic.c
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2 as
  11 * published by the Free Software Foundation.
  12 */
  13#include <linux/gpio.h>
  14#include <linux/kernel.h>
  15#include <linux/init.h>
  16#include <linux/platform_device.h>
  17#include <linux/mtd/mtd.h>
  18#include <linux/mtd/partitions.h>
  19#include <linux/mtd/physmap.h>
  20#include <linux/delay.h>
  21#include <linux/workqueue.h>
  22#include <linux/i2c.h>
  23#include <linux/i2c/at24.h>
  24#include <linux/input.h>
  25#include <linux/err.h>
  26#include <linux/clk.h>
  27#include <linux/io.h>
  28#include <linux/input/matrix_keypad.h>
  29#include <linux/mfd/menelaus.h>
  30#include <linux/omap-dma.h>
  31
  32#include <asm/mach-types.h>
  33#include <asm/mach/arch.h>
  34#include <asm/mach/map.h>
  35
  36#include <video/omapdss.h>
  37#include <video/omap-panel-data.h>
  38
  39#include "common.h"
  40#include "mux.h"
  41#include "control.h"
  42#include "gpmc.h"
  43#include "gpmc-smc91x.h"
  44
  45#define H4_FLASH_CS     0
  46
  47#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
  48static const uint32_t board_matrix_keys[] = {
  49        KEY(0, 0, KEY_LEFT),
  50        KEY(1, 0, KEY_RIGHT),
  51        KEY(2, 0, KEY_A),
  52        KEY(3, 0, KEY_B),
  53        KEY(4, 0, KEY_C),
  54        KEY(0, 1, KEY_DOWN),
  55        KEY(1, 1, KEY_UP),
  56        KEY(2, 1, KEY_E),
  57        KEY(3, 1, KEY_F),
  58        KEY(4, 1, KEY_G),
  59        KEY(0, 2, KEY_ENTER),
  60        KEY(1, 2, KEY_I),
  61        KEY(2, 2, KEY_J),
  62        KEY(3, 2, KEY_K),
  63        KEY(4, 2, KEY_3),
  64        KEY(0, 3, KEY_M),
  65        KEY(1, 3, KEY_N),
  66        KEY(2, 3, KEY_O),
  67        KEY(3, 3, KEY_P),
  68        KEY(4, 3, KEY_Q),
  69        KEY(0, 4, KEY_R),
  70        KEY(1, 4, KEY_4),
  71        KEY(2, 4, KEY_T),
  72        KEY(3, 4, KEY_U),
  73        KEY(4, 4, KEY_ENTER),
  74        KEY(0, 5, KEY_V),
  75        KEY(1, 5, KEY_W),
  76        KEY(2, 5, KEY_L),
  77        KEY(3, 5, KEY_S),
  78        KEY(4, 5, KEY_ENTER),
  79};
  80
  81static const struct matrix_keymap_data board_keymap_data = {
  82        .keymap                 = board_matrix_keys,
  83        .keymap_size            = ARRAY_SIZE(board_matrix_keys),
  84};
  85
  86static unsigned int board_keypad_row_gpios[] = {
  87        88, 89, 124, 11, 6, 96
  88};
  89
  90static unsigned int board_keypad_col_gpios[] = {
  91        90, 91, 100, 36, 12, 97, 98
  92};
  93
  94static struct matrix_keypad_platform_data board_keypad_platform_data = {
  95        .keymap_data    = &board_keymap_data,
  96        .row_gpios      = board_keypad_row_gpios,
  97        .num_row_gpios  = ARRAY_SIZE(board_keypad_row_gpios),
  98        .col_gpios      = board_keypad_col_gpios,
  99        .num_col_gpios  = ARRAY_SIZE(board_keypad_col_gpios),
 100        .active_low     = 1,
 101
 102        .debounce_ms            = 20,
 103        .col_scan_delay_us      = 5,
 104};
 105
 106static struct platform_device board_keyboard = {
 107        .name   = "matrix-keypad",
 108        .id     = -1,
 109        .dev    = {
 110                .platform_data = &board_keypad_platform_data,
 111        },
 112};
 113static void __init board_mkp_init(void)
 114{
 115        omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
 116        omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
 117        omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
 118        omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 119        if (omap_has_menelaus()) {
 120                omap_mux_init_signal("sdrc_a14.gpio0",
 121                        OMAP_PULL_ENA | OMAP_PULL_UP);
 122                omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
 123                omap_mux_init_signal("gpio_98", 0);
 124                board_keypad_row_gpios[5] = 0;
 125                board_keypad_col_gpios[2] = 15;
 126                board_keypad_col_gpios[6] = 18;
 127        } else {
 128                omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
 129                omap_mux_init_signal("gpio_100", 0);
 130                omap_mux_init_signal("gpio_98", 0);
 131        }
 132        omap_mux_init_signal("gpio_90", 0);
 133        omap_mux_init_signal("gpio_91", 0);
 134        omap_mux_init_signal("gpio_36", 0);
 135        omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
 136        omap_mux_init_signal("gpio_97", 0);
 137
 138        platform_device_register(&board_keyboard);
 139}
 140#else
 141static inline void board_mkp_init(void)
 142{
 143}
 144#endif
 145
 146static struct mtd_partition h4_partitions[] = {
 147        /* bootloader (U-Boot, etc) in first sector */
 148        {
 149              .name             = "bootloader",
 150              .offset           = 0,
 151              .size             = SZ_128K,
 152              .mask_flags       = MTD_WRITEABLE, /* force read-only */
 153        },
 154        /* bootloader params in the next sector */
 155        {
 156              .name             = "params",
 157              .offset           = MTDPART_OFS_APPEND,
 158              .size             = SZ_128K,
 159              .mask_flags       = 0,
 160        },
 161        /* kernel */
 162        {
 163              .name             = "kernel",
 164              .offset           = MTDPART_OFS_APPEND,
 165              .size             = SZ_2M,
 166              .mask_flags       = 0
 167        },
 168        /* file system */
 169        {
 170              .name             = "filesystem",
 171              .offset           = MTDPART_OFS_APPEND,
 172              .size             = MTDPART_SIZ_FULL,
 173              .mask_flags       = 0
 174        }
 175};
 176
 177static struct physmap_flash_data h4_flash_data = {
 178        .width          = 2,
 179        .parts          = h4_partitions,
 180        .nr_parts       = ARRAY_SIZE(h4_partitions),
 181};
 182
 183static struct resource h4_flash_resource = {
 184        .flags          = IORESOURCE_MEM,
 185};
 186
 187static struct platform_device h4_flash_device = {
 188        .name           = "physmap-flash",
 189        .id             = 0,
 190        .dev            = {
 191                .platform_data  = &h4_flash_data,
 192        },
 193        .num_resources  = 1,
 194        .resource       = &h4_flash_resource,
 195};
 196
 197static struct platform_device *h4_devices[] __initdata = {
 198        &h4_flash_device,
 199};
 200
 201static struct panel_generic_dpi_data h4_panel_data = {
 202        .name                   = "h4",
 203};
 204
 205static struct omap_dss_device h4_lcd_device = {
 206        .name                   = "lcd",
 207        .driver_name            = "generic_dpi_panel",
 208        .type                   = OMAP_DISPLAY_TYPE_DPI,
 209        .phy.dpi.data_lines     = 16,
 210        .data                   = &h4_panel_data,
 211};
 212
 213static struct omap_dss_device *h4_dss_devices[] = {
 214        &h4_lcd_device,
 215};
 216
 217static struct omap_dss_board_info h4_dss_data = {
 218        .num_devices    = ARRAY_SIZE(h4_dss_devices),
 219        .devices        = h4_dss_devices,
 220        .default_device = &h4_lcd_device,
 221};
 222
 223/* 2420 Sysboot setup (2430 is different) */
 224static u32 get_sysboot_value(void)
 225{
 226        return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
 227                (OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
 228                 OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
 229                 OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
 230}
 231
 232/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
 233 *
 234 * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
 235 *  correctly.  The macro needs to look at production_id not just hawkeye.
 236 */
 237static u32 is_gpmc_muxed(void)
 238{
 239        u32 mux;
 240        mux = get_sysboot_value();
 241        if ((mux & 0xF) == 0xd)
 242                return 1;       /* NAND config (could be either) */
 243        if (mux & 0x2)          /* if mux'ed */
 244                return 1;
 245        else
 246                return 0;
 247}
 248
 249#if IS_ENABLED(CONFIG_SMC91X)
 250
 251static struct omap_smc91x_platform_data board_smc91x_data = {
 252        .cs             = 1,
 253        .gpio_irq       = 92,
 254        .flags          = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL,
 255};
 256
 257static void __init board_smc91x_init(void)
 258{
 259        if (is_gpmc_muxed())
 260                board_smc91x_data.flags |= GPMC_MUX_ADD_DATA;
 261
 262        omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT);
 263        gpmc_smc91x_init(&board_smc91x_data);
 264}
 265
 266#else
 267
 268static inline void board_smc91x_init(void)
 269{
 270}
 271
 272#endif
 273
 274static void __init h4_init_flash(void)
 275{
 276        unsigned long base;
 277
 278        if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
 279                printk("Can't request GPMC CS for flash\n");
 280                return;
 281        }
 282        h4_flash_resource.start = base;
 283        h4_flash_resource.end   = base + SZ_64M - 1;
 284}
 285
 286static struct at24_platform_data m24c01 = {
 287        .byte_len       = SZ_1K / 8,
 288        .page_size      = 16,
 289};
 290
 291static struct i2c_board_info __initdata h4_i2c_board_info[] = {
 292        {
 293                I2C_BOARD_INFO("isp1301_omap", 0x2d),
 294        },
 295        {       /* EEPROM on mainboard */
 296                I2C_BOARD_INFO("24c01", 0x52),
 297                .platform_data  = &m24c01,
 298        },
 299        {       /* EEPROM on cpu card */
 300                I2C_BOARD_INFO("24c01", 0x57),
 301                .platform_data  = &m24c01,
 302        },
 303};
 304
 305#ifdef CONFIG_OMAP_MUX
 306static struct omap_board_mux board_mux[] __initdata = {
 307        { .reg_offset = OMAP_MUX_TERMINATOR },
 308};
 309#endif
 310
 311static void __init omap_h4_init(void)
 312{
 313        omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
 314
 315        /*
 316         * Make sure the serial ports are muxed on at this point.
 317         * You have to mux them off in device drivers later on
 318         * if not needed.
 319         */
 320
 321        board_mkp_init();
 322        h4_i2c_board_info[0].irq = gpio_to_irq(125);
 323        i2c_register_board_info(1, h4_i2c_board_info,
 324                        ARRAY_SIZE(h4_i2c_board_info));
 325
 326        platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
 327        omap_serial_init();
 328        omap_sdrc_init(NULL, NULL);
 329        h4_init_flash();
 330        board_smc91x_init();
 331
 332        omap_display_init(&h4_dss_data);
 333}
 334
 335MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 336        /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 337        .atag_offset    = 0x100,
 338        .reserve        = omap_reserve,
 339        .map_io         = omap242x_map_io,
 340        .init_early     = omap2420_init_early,
 341        .init_irq       = omap2_init_irq,
 342        .handle_irq     = omap2_intc_handle_irq,
 343        .init_machine   = omap_h4_init,
 344        .init_late      = omap2420_init_late,
 345        .init_time      = omap2_sync32k_timer_init,
 346        .restart        = omap2xxx_restart,
 347MACHINE_END
 348