linux/arch/arm/mach-s3c24xx/mach-rx3715.c
<<
>>
Prefs
   1/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
   2 *
   3 * Copyright (c) 2003-2004 Simtec Electronics
   4 *      Ben Dooks <ben@simtec.co.uk>
   5 *
   6 * http://www.handhelds.org/projects/rx3715.html
   7 *
   8 * This program is free software; you can redistribute it and/or modify
   9 * it under the terms of the GNU General Public License version 2 as
  10 * published by the Free Software Foundation.
  11 *
  12*/
  13
  14#include <linux/kernel.h>
  15#include <linux/types.h>
  16#include <linux/interrupt.h>
  17#include <linux/list.h>
  18#include <linux/memblock.h>
  19#include <linux/timer.h>
  20#include <linux/init.h>
  21#include <linux/tty.h>
  22#include <linux/console.h>
  23#include <linux/device.h>
  24#include <linux/platform_device.h>
  25#include <linux/serial_core.h>
  26#include <linux/serial.h>
  27#include <linux/io.h>
  28#include <linux/mtd/mtd.h>
  29#include <linux/mtd/nand.h>
  30#include <linux/mtd/nand_ecc.h>
  31#include <linux/mtd/partitions.h>
  32
  33#include <asm/mach/arch.h>
  34#include <asm/mach/irq.h>
  35#include <asm/mach/map.h>
  36
  37#include <linux/platform_data/mtd-nand-s3c2410.h>
  38
  39#include <asm/irq.h>
  40#include <asm/mach-types.h>
  41
  42#include <mach/fb.h>
  43#include <mach/hardware.h>
  44#include <mach/regs-gpio.h>
  45#include <mach/regs-lcd.h>
  46
  47#include <plat/clock.h>
  48#include <plat/cpu.h>
  49#include <plat/devs.h>
  50#include <plat/pm.h>
  51#include <plat/regs-serial.h>
  52#include <plat/samsung-time.h>
  53
  54#include "common.h"
  55#include "h1940.h"
  56
  57static struct map_desc rx3715_iodesc[] __initdata = {
  58        /* dump ISA space somewhere unused */
  59
  60        {
  61                .virtual        = (u32)S3C24XX_VA_ISA_WORD,
  62                .pfn            = __phys_to_pfn(S3C2410_CS3),
  63                .length         = SZ_1M,
  64                .type           = MT_DEVICE,
  65        }, {
  66                .virtual        = (u32)S3C24XX_VA_ISA_BYTE,
  67                .pfn            = __phys_to_pfn(S3C2410_CS3),
  68                .length         = SZ_1M,
  69                .type           = MT_DEVICE,
  70        },
  71};
  72
  73static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
  74        [0] = {
  75                .hwport      = 0,
  76                .flags       = 0,
  77                .ucon        = 0x3c5,
  78                .ulcon       = 0x03,
  79                .ufcon       = 0x51,
  80                .clk_sel        = S3C2410_UCON_CLKSEL3,
  81        },
  82        [1] = {
  83                .hwport      = 1,
  84                .flags       = 0,
  85                .ucon        = 0x3c5,
  86                .ulcon       = 0x03,
  87                .ufcon       = 0x00,
  88                .clk_sel        = S3C2410_UCON_CLKSEL3,
  89        },
  90        /* IR port */
  91        [2] = {
  92                .hwport      = 2,
  93                .uart_flags  = UPF_CONS_FLOW,
  94                .ucon        = 0x3c5,
  95                .ulcon       = 0x43,
  96                .ufcon       = 0x51,
  97                .clk_sel        = S3C2410_UCON_CLKSEL3,
  98        }
  99};
 100
 101/* framebuffer lcd controller information */
 102
 103static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
 104        .lcdcon5 =      S3C2410_LCDCON5_INVVLINE |
 105                        S3C2410_LCDCON5_FRM565 |
 106                        S3C2410_LCDCON5_HWSWP,
 107
 108        .type           = S3C2410_LCDCON1_TFT,
 109        .width          = 240,
 110        .height         = 320,
 111
 112        .pixclock       = 260000,
 113        .xres           = 240,
 114        .yres           = 320,
 115        .bpp            = 16,
 116        .left_margin    = 36,
 117        .right_margin   = 36,
 118        .hsync_len      = 8,
 119        .upper_margin   = 6,
 120        .lower_margin   = 7,
 121        .vsync_len      = 3,
 122};
 123
 124static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 125
 126        .displays =     &rx3715_lcdcfg,
 127        .num_displays = 1,
 128        .default_display = 0,
 129
 130        .lpcsel =       0xf82,
 131
 132        .gpccon =       0xaa955699,
 133        .gpccon_mask =  0xffc003cc,
 134        .gpcup =        0x0000ffff,
 135        .gpcup_mask =   0xffffffff,
 136
 137        .gpdcon =       0xaa95aaa1,
 138        .gpdcon_mask =  0xffc0fff0,
 139        .gpdup =        0x0000faff,
 140        .gpdup_mask =   0xffffffff,
 141};
 142
 143static struct mtd_partition __initdata rx3715_nand_part[] = {
 144        [0] = {
 145                .name           = "Whole Flash",
 146                .offset         = 0,
 147                .size           = MTDPART_SIZ_FULL,
 148                .mask_flags     = MTD_WRITEABLE,
 149        }
 150};
 151
 152static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 153        [0] = {
 154                .name           = "Internal",
 155                .nr_chips       = 1,
 156                .nr_partitions  = ARRAY_SIZE(rx3715_nand_part),
 157                .partitions     = rx3715_nand_part,
 158        },
 159};
 160
 161static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 162        .tacls          = 25,
 163        .twrph0         = 50,
 164        .twrph1         = 15,
 165        .nr_sets        = ARRAY_SIZE(rx3715_nand_sets),
 166        .sets           = rx3715_nand_sets,
 167};
 168
 169static struct platform_device *rx3715_devices[] __initdata = {
 170        &s3c_device_ohci,
 171        &s3c_device_lcd,
 172        &s3c_device_wdt,
 173        &s3c_device_i2c0,
 174        &s3c_device_iis,
 175        &s3c_device_nand,
 176};
 177
 178static void __init rx3715_map_io(void)
 179{
 180        s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 181        s3c24xx_init_clocks(16934000);
 182        s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 183        samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 184}
 185
 186/* H1940 and RX3715 need to reserve this for suspend */
 187static void __init rx3715_reserve(void)
 188{
 189        memblock_reserve(0x30003000, 0x1000);
 190        memblock_reserve(0x30081000, 0x1000);
 191}
 192
 193static void __init rx3715_init_machine(void)
 194{
 195#ifdef CONFIG_PM_H1940
 196        memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 197#endif
 198        s3c_pm_init();
 199
 200        s3c_nand_set_platdata(&rx3715_nand_info);
 201        s3c24xx_fb_set_platdata(&rx3715_fb_info);
 202        platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 203}
 204
 205MACHINE_START(RX3715, "IPAQ-RX3715")
 206        /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 207        .atag_offset    = 0x100,
 208        .map_io         = rx3715_map_io,
 209        .reserve        = rx3715_reserve,
 210        .init_irq       = s3c2440_init_irq,
 211        .init_machine   = rx3715_init_machine,
 212        .init_time      = samsung_timer_init,
 213        .restart        = s3c244x_restart,
 214MACHINE_END
 215