linux/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c
<<
>>
Prefs
   1/*
   2 * CS5536 General timer functions
   3 *
   4 * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
   5 * Author: Yanhua, yanh@lemote.com
   6 *
   7 * Copyright (C) 2009 Lemote Inc.
   8 * Author: Wu zhangjin, wuzhangjin@gmail.com
   9 *
  10 * Reference: AMD Geode(TM) CS5536 Companion Device Data Book
  11 *
  12 *  This program is free software; you can redistribute  it and/or modify it
  13 *  under  the terms of  the GNU General  Public License as published by the
  14 *  Free Software Foundation;  either version 2 of the  License, or (at your
  15 *  option) any later version.
  16 */
  17
  18#include <linux/io.h>
  19#include <linux/init.h>
  20#include <linux/module.h>
  21#include <linux/jiffies.h>
  22#include <linux/spinlock.h>
  23#include <linux/interrupt.h>
  24#include <linux/clockchips.h>
  25
  26#include <asm/time.h>
  27
  28#include <cs5536/cs5536_mfgpt.h>
  29
  30DEFINE_SPINLOCK(mfgpt_lock);
  31EXPORT_SYMBOL(mfgpt_lock);
  32
  33static u32 mfgpt_base;
  34
  35/*
  36 * Initialize the MFGPT timer.
  37 *
  38 * This is also called after resume to bring the MFGPT into operation again.
  39 */
  40
  41/* disable counter */
  42void disable_mfgpt0_counter(void)
  43{
  44        outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP);
  45}
  46EXPORT_SYMBOL(disable_mfgpt0_counter);
  47
  48/* enable counter, comparator2 to event mode, 14.318MHz clock */
  49void enable_mfgpt0_counter(void)
  50{
  51        outw(0xe310, MFGPT0_SETUP);
  52}
  53EXPORT_SYMBOL(enable_mfgpt0_counter);
  54
  55static void init_mfgpt_timer(enum clock_event_mode mode,
  56                             struct clock_event_device *evt)
  57{
  58        spin_lock(&mfgpt_lock);
  59
  60        switch (mode) {
  61        case CLOCK_EVT_MODE_PERIODIC:
  62                outw(COMPARE, MFGPT0_CMP2);     /* set comparator2 */
  63                outw(0, MFGPT0_CNT);    /* set counter to 0 */
  64                enable_mfgpt0_counter();
  65                break;
  66
  67        case CLOCK_EVT_MODE_SHUTDOWN:
  68        case CLOCK_EVT_MODE_UNUSED:
  69                if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
  70                    evt->mode == CLOCK_EVT_MODE_ONESHOT)
  71                        disable_mfgpt0_counter();
  72                break;
  73
  74        case CLOCK_EVT_MODE_ONESHOT:
  75                /* The oneshot mode have very high deviation, Not use it! */
  76                break;
  77
  78        case CLOCK_EVT_MODE_RESUME:
  79                /* Nothing to do here */
  80                break;
  81        }
  82        spin_unlock(&mfgpt_lock);
  83}
  84
  85static struct clock_event_device mfgpt_clockevent = {
  86        .name = "mfgpt",
  87        .features = CLOCK_EVT_FEAT_PERIODIC,
  88        .set_mode = init_mfgpt_timer,
  89        .irq = CS5536_MFGPT_INTR,
  90};
  91
  92static irqreturn_t timer_interrupt(int irq, void *dev_id)
  93{
  94        u32 basehi;
  95
  96        /*
  97         * get MFGPT base address
  98         *
  99         * NOTE: do not remove me, it's need for the value of mfgpt_base is
 100         * variable
 101         */
 102        _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
 103
 104        /* ack */
 105        outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP);
 106
 107        mfgpt_clockevent.event_handler(&mfgpt_clockevent);
 108
 109        return IRQ_HANDLED;
 110}
 111
 112static struct irqaction irq5 = {
 113        .handler = timer_interrupt,
 114        .flags = IRQF_NOBALANCING | IRQF_TIMER,
 115        .name = "timer"
 116};
 117
 118/*
 119 * Initialize the conversion factor and the min/max deltas of the clock event
 120 * structure and register the clock event source with the framework.
 121 */
 122void __init setup_mfgpt0_timer(void)
 123{
 124        u32 basehi;
 125        struct clock_event_device *cd = &mfgpt_clockevent;
 126        unsigned int cpu = smp_processor_id();
 127
 128        cd->cpumask = cpumask_of(cpu);
 129        clockevent_set_clock(cd, MFGPT_TICK_RATE);
 130        cd->max_delta_ns = clockevent_delta2ns(0xffff, cd);
 131        cd->min_delta_ns = clockevent_delta2ns(0xf, cd);
 132
 133        /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */
 134        _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100);
 135
 136        /* Enable Interrupt Gate 5 */
 137        _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000);
 138
 139        /* get MFGPT base address */
 140        _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base);
 141
 142        clockevents_register_device(cd);
 143
 144        setup_irq(CS5536_MFGPT_INTR, &irq5);
 145}
 146
 147/*
 148 * Since the MFGPT overflows every tick, its not very useful
 149 * to just read by itself. So use jiffies to emulate a free
 150 * running counter:
 151 */
 152static cycle_t mfgpt_read(struct clocksource *cs)
 153{
 154        unsigned long flags;
 155        int count;
 156        u32 jifs;
 157        static int old_count;
 158        static u32 old_jifs;
 159
 160        spin_lock_irqsave(&mfgpt_lock, flags);
 161        /*
 162         * Although our caller may have the read side of xtime_lock,
 163         * this is now a seqlock, and we are cheating in this routine
 164         * by having side effects on state that we cannot undo if
 165         * there is a collision on the seqlock and our caller has to
 166         * retry.  (Namely, old_jifs and old_count.)  So we must treat
 167         * jiffies as volatile despite the lock.  We read jiffies
 168         * before latching the timer count to guarantee that although
 169         * the jiffies value might be older than the count (that is,
 170         * the counter may underflow between the last point where
 171         * jiffies was incremented and the point where we latch the
 172         * count), it cannot be newer.
 173         */
 174        jifs = jiffies;
 175        /* read the count */
 176        count = inw(MFGPT0_CNT);
 177
 178        /*
 179         * It's possible for count to appear to go the wrong way for this
 180         * reason:
 181         *
 182         *  The timer counter underflows, but we haven't handled the resulting
 183         *  interrupt and incremented jiffies yet.
 184         *
 185         * Previous attempts to handle these cases intelligently were buggy, so
 186         * we just do the simple thing now.
 187         */
 188        if (count < old_count && jifs == old_jifs)
 189                count = old_count;
 190
 191        old_count = count;
 192        old_jifs = jifs;
 193
 194        spin_unlock_irqrestore(&mfgpt_lock, flags);
 195
 196        return (cycle_t) (jifs * COMPARE) + count;
 197}
 198
 199static struct clocksource clocksource_mfgpt = {
 200        .name = "mfgpt",
 201        .rating = 120, /* Functional for real use, but not desired */
 202        .read = mfgpt_read,
 203        .mask = CLOCKSOURCE_MASK(32),
 204};
 205
 206int __init init_mfgpt_clocksource(void)
 207{
 208        if (num_possible_cpus() > 1)    /* MFGPT does not scale! */
 209                return 0;
 210
 211        return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE);
 212}
 213
 214arch_initcall(init_mfgpt_clocksource);
 215