linux/arch/mips/powertv/asic/asic_devices.c
<<
>>
Prefs
   1/*
   2 *
   3 * Description:  Defines the platform resources for Gaia-based settops.
   4 *
   5 * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License as published by
   9 * the Free Software Foundation; either version 2 of the License, or
  10 * (at your option) any later version.
  11 *
  12 * This program is distributed in the hope that it will be useful,
  13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15 * GNU General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License
  18 * along with this program; if not, write to the Free Software
  19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  20 *
  21 * NOTE: The bootloader allocates persistent memory at an address which is
  22 * 16 MiB below the end of the highest address in KSEG0. All fixed
  23 * address memory reservations must avoid this region.
  24 */
  25
  26#include <linux/device.h>
  27#include <linux/kernel.h>
  28#include <linux/init.h>
  29#include <linux/resource.h>
  30#include <linux/serial_reg.h>
  31#include <linux/io.h>
  32#include <linux/bootmem.h>
  33#include <linux/mm.h>
  34#include <linux/platform_device.h>
  35#include <linux/module.h>
  36#include <asm/page.h>
  37#include <linux/swap.h>
  38#include <linux/highmem.h>
  39#include <linux/dma-mapping.h>
  40
  41#include <asm/mach-powertv/asic.h>
  42#include <asm/mach-powertv/asic_regs.h>
  43#include <asm/mach-powertv/interrupts.h>
  44
  45#ifdef CONFIG_BOOTLOADER_DRIVER
  46#include <asm/mach-powertv/kbldr.h>
  47#endif
  48#include <asm/bootinfo.h>
  49
  50#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
  51
  52/*
  53 * Forward Prototypes
  54 */
  55static void pmem_setup_resource(void);
  56
  57/*
  58 * Global Variables
  59 */
  60enum asic_type asic;
  61
  62unsigned int platform_features;
  63unsigned int platform_family;
  64struct register_map _asic_register_map;
  65EXPORT_SYMBOL(_asic_register_map);              /* Exported for testing */
  66unsigned long asic_phy_base;
  67unsigned long asic_base;
  68EXPORT_SYMBOL(asic_base);                       /* Exported for testing */
  69struct resource *gp_resources;
  70
  71/*
  72 * Don't recommend to use it directly, it is usually used by kernel internally.
  73 * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
  74 */
  75unsigned long phys_to_dma_offset;
  76EXPORT_SYMBOL(phys_to_dma_offset);
  77
  78/*
  79 *
  80 * IO Resource Definition
  81 *
  82 */
  83
  84struct resource asic_resource = {
  85        .name  = "ASIC Resource",
  86        .start = 0,
  87        .end   = ASIC_IO_SIZE,
  88        .flags = IORESOURCE_MEM,
  89};
  90
  91/*
  92 * Allow override of bootloader-specified model
  93 * Returns zero on success, a negative errno value on failure.  This parameter
  94 * allows overriding of the bootloader-specified model.
  95 */
  96static char __initdata cmdline[COMMAND_LINE_SIZE];
  97
  98#define FORCEFAMILY_PARAM       "forcefamily"
  99
 100/*
 101 * check_forcefamily - check for, and parse, forcefamily command line parameter
 102 * @forced_family:      Pointer to two-character array in which to store the
 103 *                      value of the forcedfamily parameter, if any.
 104 */
 105static __init int check_forcefamily(unsigned char forced_family[2])
 106{
 107        const char *p;
 108
 109        forced_family[0] = '\0';
 110        forced_family[1] = '\0';
 111
 112        /* Check the command line for a forcefamily directive */
 113        strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
 114        p = strstr(cmdline, FORCEFAMILY_PARAM);
 115        if (p && (p != cmdline) && (*(p - 1) != ' '))
 116                p = strstr(p, " " FORCEFAMILY_PARAM "=");
 117
 118        if (p) {
 119                p += strlen(FORCEFAMILY_PARAM "=");
 120
 121                if (*p == '\0' || *(p + 1) == '\0' ||
 122                        (*(p + 2) != '\0' && *(p + 2) != ' '))
 123                        pr_err(FORCEFAMILY_PARAM " must be exactly two "
 124                                "characters long, ignoring value\n");
 125
 126                else {
 127                        forced_family[0] = *p;
 128                        forced_family[1] = *(p + 1);
 129                }
 130        }
 131
 132        return 0;
 133}
 134
 135/*
 136 * platform_set_family - determine major platform family type.
 137 *
 138 * Returns family type; -1 if none
 139 * Returns the family type; -1 if none
 140 *
 141 */
 142static __init noinline void platform_set_family(void)
 143{
 144        unsigned char forced_family[2];
 145        unsigned short bootldr_family;
 146
 147        if (check_forcefamily(forced_family) == 0)
 148                bootldr_family = BOOTLDRFAMILY(forced_family[0],
 149                        forced_family[1]);
 150        else {
 151
 152#ifdef CONFIG_BOOTLOADER_DRIVER
 153                bootldr_family = (unsigned short) kbldr_GetSWFamily();
 154#else
 155#if defined(CONFIG_BOOTLOADER_FAMILY)
 156                bootldr_family = (unsigned short) BOOTLDRFAMILY(
 157                        CONFIG_BOOTLOADER_FAMILY[0],
 158                        CONFIG_BOOTLOADER_FAMILY[1]);
 159#else
 160#error "Unknown Bootloader Family"
 161#endif
 162#endif
 163        }
 164
 165        pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
 166
 167        switch (bootldr_family) {
 168        case BOOTLDRFAMILY('R', '1'):
 169                platform_family = FAMILY_1500;
 170                break;
 171        case BOOTLDRFAMILY('4', '4'):
 172                platform_family = FAMILY_4500;
 173                break;
 174        case BOOTLDRFAMILY('4', '6'):
 175                platform_family = FAMILY_4600;
 176                break;
 177        case BOOTLDRFAMILY('A', '1'):
 178                platform_family = FAMILY_4600VZA;
 179                break;
 180        case BOOTLDRFAMILY('8', '5'):
 181                platform_family = FAMILY_8500;
 182                break;
 183        case BOOTLDRFAMILY('R', '2'):
 184                platform_family = FAMILY_8500RNG;
 185                break;
 186        case BOOTLDRFAMILY('8', '6'):
 187                platform_family = FAMILY_8600;
 188                break;
 189        case BOOTLDRFAMILY('B', '1'):
 190                platform_family = FAMILY_8600VZB;
 191                break;
 192        case BOOTLDRFAMILY('E', '1'):
 193                platform_family = FAMILY_1500VZE;
 194                break;
 195        case BOOTLDRFAMILY('F', '1'):
 196                platform_family = FAMILY_1500VZF;
 197                break;
 198        case BOOTLDRFAMILY('8', '7'):
 199                platform_family = FAMILY_8700;
 200                break;
 201        default:
 202                platform_family = -1;
 203        }
 204}
 205
 206unsigned int platform_get_family(void)
 207{
 208        return platform_family;
 209}
 210EXPORT_SYMBOL(platform_get_family);
 211
 212/*
 213 * platform_get_asic - determine the ASIC type.
 214 *
 215 * Returns the ASIC type, or ASIC_UNKNOWN if unknown
 216 *
 217 */
 218enum asic_type platform_get_asic(void)
 219{
 220        return asic;
 221}
 222EXPORT_SYMBOL(platform_get_asic);
 223
 224/*
 225 * set_register_map - set ASIC register configuration
 226 * @phys_base:  Physical address of the base of the ASIC registers
 227 * @map:        Description of key ASIC registers
 228 */
 229static void __init set_register_map(unsigned long phys_base,
 230        const struct register_map *map)
 231{
 232        asic_phy_base = phys_base;
 233        _asic_register_map = *map;
 234        register_map_virtualize(&_asic_register_map);
 235        asic_base = (unsigned long)ioremap_nocache(phys_base, ASIC_IO_SIZE);
 236}
 237
 238/**
 239 * configure_platform - configuration based on platform type.
 240 */
 241void __init configure_platform(void)
 242{
 243        platform_set_family();
 244
 245        switch (platform_family) {
 246        case FAMILY_1500:
 247        case FAMILY_1500VZE:
 248        case FAMILY_1500VZF:
 249                platform_features = FFS_CAPABLE;
 250                asic = ASIC_CALLIOPE;
 251                set_register_map(CALLIOPE_IO_BASE, &calliope_register_map);
 252
 253                if (platform_family == FAMILY_1500VZE) {
 254                        gp_resources = non_dvr_vze_calliope_resources;
 255                        pr_info("Platform: 1500/Vz Class E - "
 256                                "CALLIOPE, NON_DVR_CAPABLE\n");
 257                } else if (platform_family == FAMILY_1500VZF) {
 258                        gp_resources = non_dvr_vzf_calliope_resources;
 259                        pr_info("Platform: 1500/Vz Class F - "
 260                                "CALLIOPE, NON_DVR_CAPABLE\n");
 261                } else {
 262                        gp_resources = non_dvr_calliope_resources;
 263                        pr_info("Platform: 1500/RNG100 - CALLIOPE, "
 264                                "NON_DVR_CAPABLE\n");
 265                }
 266                break;
 267
 268        case FAMILY_4500:
 269                platform_features = FFS_CAPABLE | PCIE_CAPABLE |
 270                        DISPLAY_CAPABLE;
 271                asic = ASIC_ZEUS;
 272                set_register_map(ZEUS_IO_BASE, &zeus_register_map);
 273                gp_resources = non_dvr_zeus_resources;
 274
 275                pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
 276                break;
 277
 278        case FAMILY_4600:
 279        {
 280                unsigned int chipversion = 0;
 281
 282                /* The settop has PCIE but it isn't used, so don't advertise
 283                 * it*/
 284                platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 285
 286                /* Cronus and Cronus Lite have the same register map */
 287                set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 288
 289                /* ASIC version will determine if this is a real CronusLite or
 290                 * Castrati(Cronus) */
 291                chipversion  = asic_read(chipver3) << 24;
 292                chipversion |= asic_read(chipver2) << 16;
 293                chipversion |= asic_read(chipver1) << 8;
 294                chipversion |= asic_read(chipver0);
 295
 296                if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
 297                        asic = ASIC_CRONUS;
 298                else
 299                        asic = ASIC_CRONUSLITE;
 300
 301                gp_resources = non_dvr_cronuslite_resources;
 302                pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 303                        "chipversion=0x%08X\n",
 304                        (asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
 305                        chipversion);
 306                break;
 307        }
 308        case FAMILY_4600VZA:
 309                platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 310                asic = ASIC_CRONUS;
 311                set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 312                gp_resources = non_dvr_cronus_resources;
 313
 314                pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
 315                break;
 316
 317        case FAMILY_8500:
 318        case FAMILY_8500RNG:
 319                platform_features = DVR_CAPABLE | PCIE_CAPABLE |
 320                        DISPLAY_CAPABLE;
 321                asic = ASIC_ZEUS;
 322                set_register_map(ZEUS_IO_BASE, &zeus_register_map);
 323                gp_resources = dvr_zeus_resources;
 324
 325                pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
 326                break;
 327
 328        case FAMILY_8600:
 329        case FAMILY_8600VZB:
 330                platform_features = DVR_CAPABLE | PCIE_CAPABLE |
 331                        DISPLAY_CAPABLE;
 332                asic = ASIC_CRONUS;
 333                set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 334                gp_resources = dvr_cronus_resources;
 335
 336                pr_info("Platform: 8600/Vz Class B - CRONUS, "
 337                        "DVR_CAPABLE\n");
 338                break;
 339
 340        case FAMILY_8700:
 341                platform_features = FFS_CAPABLE | PCIE_CAPABLE;
 342                asic = ASIC_GAIA;
 343                set_register_map(GAIA_IO_BASE, &gaia_register_map);
 344                gp_resources = dvr_gaia_resources;
 345
 346                pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n");
 347                break;
 348
 349        default:
 350                pr_crit("Platform:  UNKNOWN PLATFORM\n");
 351                break;
 352        }
 353
 354        switch (asic) {
 355        case ASIC_ZEUS:
 356                phys_to_dma_offset = 0x30000000;
 357                break;
 358        case ASIC_CALLIOPE:
 359                phys_to_dma_offset = 0x10000000;
 360                break;
 361        case ASIC_CRONUSLITE:
 362                /* Fall through */
 363        case ASIC_CRONUS:
 364                /*
 365                 * TODO: We suppose 0x10000000 aliases into 0x20000000-
 366                 * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
 367                 * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
 368                 */
 369                phys_to_dma_offset = 0x10000000;
 370                break;
 371        default:
 372                phys_to_dma_offset = 0x00000000;
 373                break;
 374        }
 375}
 376
 377/*
 378 * RESOURCE ALLOCATION
 379 *
 380 */
 381/*
 382 * Allocates/reserves the Platform memory resources early in the boot process.
 383 * This ignores any resources that are designated IORESOURCE_IO
 384 */
 385void __init platform_alloc_bootmem(void)
 386{
 387        int i;
 388        int total = 0;
 389
 390        /* Get persistent memory data from command line before allocating
 391         * resources. This need to happen before normal command line parsing
 392         * has been done */
 393        pmem_setup_resource();
 394
 395        /* Loop through looking for resources that want a particular address */
 396        for (i = 0; gp_resources[i].flags != 0; i++) {
 397                int size = resource_size(&gp_resources[i]);
 398                if ((gp_resources[i].start != 0) &&
 399                        ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
 400                        reserve_bootmem(dma_to_phys(gp_resources[i].start),
 401                                size, 0);
 402                        total += resource_size(&gp_resources[i]);
 403                        pr_info("reserve resource %s at %08x (%u bytes)\n",
 404                                gp_resources[i].name, gp_resources[i].start,
 405                                resource_size(&gp_resources[i]));
 406                }
 407        }
 408
 409        /* Loop through assigning addresses for those that are left */
 410        for (i = 0; gp_resources[i].flags != 0; i++) {
 411                int size = resource_size(&gp_resources[i]);
 412                if ((gp_resources[i].start == 0) &&
 413                        ((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
 414                        void *mem = alloc_bootmem_pages(size);
 415
 416                        if (mem == NULL)
 417                                pr_err("Unable to allocate bootmem pages "
 418                                        "for %s\n", gp_resources[i].name);
 419
 420                        else {
 421                                gp_resources[i].start =
 422                                        phys_to_dma(virt_to_phys(mem));
 423                                gp_resources[i].end =
 424                                        gp_resources[i].start + size - 1;
 425                                total += size;
 426                                pr_info("allocate resource %s at %08x "
 427                                                "(%u bytes)\n",
 428                                        gp_resources[i].name,
 429                                        gp_resources[i].start, size);
 430                        }
 431                }
 432        }
 433
 434        pr_info("Total Platform driver memory allocation: 0x%08x\n", total);
 435
 436        /* indicate resources that are platform I/O related */
 437        for (i = 0; gp_resources[i].flags != 0; i++) {
 438                if ((gp_resources[i].start != 0) &&
 439                        ((gp_resources[i].flags & IORESOURCE_IO) != 0)) {
 440                        pr_info("reserved platform resource %s at %08x\n",
 441                                gp_resources[i].name, gp_resources[i].start);
 442                }
 443        }
 444}
 445
 446/*
 447 *
 448 * PERSISTENT MEMORY (PMEM) CONFIGURATION
 449 *
 450 */
 451static unsigned long pmemaddr __initdata;
 452
 453static int __init early_param_pmemaddr(char *p)
 454{
 455        pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0);
 456        return 0;
 457}
 458early_param("pmemaddr", early_param_pmemaddr);
 459
 460static long pmemlen __initdata;
 461
 462static int __init early_param_pmemlen(char *p)
 463{
 464/* TODO: we can use this code when and if the bootloader ever changes this */
 465#if 0
 466        pmemlen = (unsigned long)simple_strtoul(p, NULL, 0);
 467#else
 468        pmemlen = 0x20000;
 469#endif
 470        return 0;
 471}
 472early_param("pmemlen", early_param_pmemlen);
 473
 474/*
 475 * Set up persistent memory. If we were given values, we patch the array of
 476 * resources. Otherwise, persistent memory may be allocated anywhere at all.
 477 */
 478static void __init pmem_setup_resource(void)
 479{
 480        struct resource *resource;
 481        resource = asic_resource_get("DiagPersistentMemory");
 482
 483        if (resource && pmemaddr && pmemlen) {
 484                /* The address provided by bootloader is in kseg0. Convert to
 485                 * a bus address. */
 486                resource->start = phys_to_dma(pmemaddr - 0x80000000);
 487                resource->end = resource->start + pmemlen - 1;
 488
 489                pr_info("persistent memory: start=0x%x  end=0x%x\n",
 490                        resource->start, resource->end);
 491        }
 492}
 493
 494/*
 495 *
 496 * RESOURCE ACCESS FUNCTIONS
 497 *
 498 */
 499
 500/**
 501 * asic_resource_get - retrieves parameters for a platform resource.
 502 * @name:       string to match resource
 503 *
 504 * Returns a pointer to a struct resource corresponding to the given name.
 505 *
 506 * CANNOT BE NAMED platform_resource_get, which would be the obvious choice,
 507 * as this function name is already declared
 508 */
 509struct resource *asic_resource_get(const char *name)
 510{
 511        int i;
 512
 513        for (i = 0; gp_resources[i].flags != 0; i++) {
 514                if (strcmp(gp_resources[i].name, name) == 0)
 515                        return &gp_resources[i];
 516        }
 517
 518        return NULL;
 519}
 520EXPORT_SYMBOL(asic_resource_get);
 521
 522/**
 523 * platform_release_memory - release pre-allocated memory
 524 * @ptr:        pointer to memory to release
 525 * @size:       size of resource
 526 *
 527 * This must only be called for memory allocated or reserved via the boot
 528 * memory allocator.
 529 */
 530void platform_release_memory(void *ptr, int size)
 531{
 532        free_reserved_area(ptr, ptr + size, -1, NULL);
 533}
 534EXPORT_SYMBOL(platform_release_memory);
 535
 536/*
 537 *
 538 * FEATURE AVAILABILITY FUNCTIONS
 539 *
 540 */
 541int platform_supports_dvr(void)
 542{
 543        return (platform_features & DVR_CAPABLE) != 0;
 544}
 545
 546int platform_supports_ffs(void)
 547{
 548        return (platform_features & FFS_CAPABLE) != 0;
 549}
 550
 551int platform_supports_pcie(void)
 552{
 553        return (platform_features & PCIE_CAPABLE) != 0;
 554}
 555
 556int platform_supports_display(void)
 557{
 558        return (platform_features & DISPLAY_CAPABLE) != 0;
 559}
 560