linux/arch/sh/boards/board-edosk7760.c
<<
>>
Prefs
   1/*
   2 * Renesas Europe EDOSK7760 Board Support
   3 *
   4 * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
   5 * Author: Luca Santini <luca.santini@spesonline.com>
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License as published by
   9 * the Free Software Foundation; either version 2 of the License, or
  10 * (at your option) any later version.
  11 *
  12 * This program is distributed in the hope that it will be useful,
  13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 * GNU General Public License for more details.
  16 *
  17 * You should have received a copy of the GNU General Public License
  18 * along with this program; if not, write to the Free Software
  19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20 */
  21#include <linux/init.h>
  22#include <linux/types.h>
  23#include <linux/platform_device.h>
  24#include <linux/smc91x.h>
  25#include <linux/interrupt.h>
  26#include <linux/sh_intc.h>
  27#include <linux/i2c.h>
  28#include <linux/mtd/physmap.h>
  29#include <asm/machvec.h>
  30#include <asm/io.h>
  31#include <asm/addrspace.h>
  32#include <asm/delay.h>
  33#include <asm/i2c-sh7760.h>
  34#include <asm/sizes.h>
  35
  36/* Bus state controller registers for CS4 area */
  37#define BSC_CS4BCR      0xA4FD0010
  38#define BSC_CS4WCR      0xA4FD0030
  39
  40#define SMC_IOBASE      0xA2000000
  41#define SMC_IO_OFFSET   0x300
  42#define SMC_IOADDR      (SMC_IOBASE + SMC_IO_OFFSET)
  43
  44/* NOR flash */
  45static struct mtd_partition edosk7760_nor_flash_partitions[] = {
  46        {
  47                .name = "bootloader",
  48                .offset = 0,
  49                .size = SZ_256K,
  50                .mask_flags = MTD_WRITEABLE,    /* Read-only */
  51        }, {
  52                .name = "kernel",
  53                .offset = MTDPART_OFS_APPEND,
  54                .size = SZ_2M,
  55        }, {
  56                .name = "fs",
  57                .offset = MTDPART_OFS_APPEND,
  58                .size = (26 << 20),
  59        }, {
  60                .name = "other",
  61                .offset = MTDPART_OFS_APPEND,
  62                .size = MTDPART_SIZ_FULL,
  63        },
  64};
  65
  66static struct physmap_flash_data edosk7760_nor_flash_data = {
  67        .width          = 4,
  68        .parts          = edosk7760_nor_flash_partitions,
  69        .nr_parts       = ARRAY_SIZE(edosk7760_nor_flash_partitions),
  70};
  71
  72static struct resource edosk7760_nor_flash_resources[] = {
  73        [0] = {
  74                .name   = "NOR Flash",
  75                .start  = 0x00000000,
  76                .end    = 0x00000000 + SZ_32M - 1,
  77                .flags  = IORESOURCE_MEM,
  78        }
  79};
  80
  81static struct platform_device edosk7760_nor_flash_device = {
  82        .name           = "physmap-flash",
  83        .resource       = edosk7760_nor_flash_resources,
  84        .num_resources  = ARRAY_SIZE(edosk7760_nor_flash_resources),
  85        .dev            = {
  86                .platform_data = &edosk7760_nor_flash_data,
  87        },
  88};
  89
  90/* i2c initialization functions */
  91static struct sh7760_i2c_platdata i2c_pd = {
  92        .speed_khz      = 400,
  93};
  94
  95static struct resource sh7760_i2c1_res[] = {
  96        {
  97                .start  = SH7760_I2C1_MMIO,
  98                .end    = SH7760_I2C1_MMIOEND,
  99                .flags  = IORESOURCE_MEM,
 100        },{
 101                .start  = evt2irq(0x9e0),
 102                .end    = evt2irq(0x9e0),
 103                .flags  = IORESOURCE_IRQ,
 104        },
 105};
 106
 107static struct platform_device sh7760_i2c1_dev = {
 108        .dev    = {
 109                .platform_data  = &i2c_pd,
 110        },
 111
 112        .name           = SH7760_I2C_DEVNAME,
 113        .id             = 1,
 114        .resource       = sh7760_i2c1_res,
 115        .num_resources  = ARRAY_SIZE(sh7760_i2c1_res),
 116};
 117
 118static struct resource sh7760_i2c0_res[] = {
 119        {
 120                .start  = SH7760_I2C0_MMIO,
 121                .end    = SH7760_I2C0_MMIOEND,
 122                .flags  = IORESOURCE_MEM,
 123        }, {
 124                .start  = evt2irq(0x9c0),
 125                .end    = evt2irq(0x9c0),
 126                .flags  = IORESOURCE_IRQ,
 127        },
 128};
 129
 130static struct platform_device sh7760_i2c0_dev = {
 131        .dev    = {
 132                .platform_data  = &i2c_pd,
 133        },
 134        .name           = SH7760_I2C_DEVNAME,
 135        .id             = 0,
 136        .resource       = sh7760_i2c0_res,
 137        .num_resources  = ARRAY_SIZE(sh7760_i2c0_res),
 138};
 139
 140/* eth initialization functions */
 141static struct smc91x_platdata smc91x_info = {
 142        .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
 143};
 144
 145static struct resource smc91x_res[] = {
 146        [0] = {
 147                .start  = SMC_IOADDR,
 148                .end    = SMC_IOADDR + SZ_32 - 1,
 149                .flags  = IORESOURCE_MEM,
 150        },
 151        [1] = {
 152                .start  = evt2irq(0x2a0),
 153                .end    = evt2irq(0x2a0),
 154                .flags  = IORESOURCE_IRQ ,
 155        }
 156};
 157
 158static struct platform_device smc91x_dev = {
 159        .name           = "smc91x",
 160        .id             = -1,
 161        .num_resources  = ARRAY_SIZE(smc91x_res),
 162        .resource       = smc91x_res,
 163
 164        .dev    = {
 165                .platform_data  = &smc91x_info,
 166        },
 167};
 168
 169/* platform init code */
 170static struct platform_device *edosk7760_devices[] __initdata = {
 171        &smc91x_dev,
 172        &edosk7760_nor_flash_device,
 173        &sh7760_i2c0_dev,
 174        &sh7760_i2c1_dev,
 175};
 176
 177static int __init init_edosk7760_devices(void)
 178{
 179        plat_irq_setup_pins(IRQ_MODE_IRQ);
 180
 181        return platform_add_devices(edosk7760_devices,
 182                                    ARRAY_SIZE(edosk7760_devices));
 183}
 184device_initcall(init_edosk7760_devices);
 185
 186/*
 187 * The Machine Vector
 188 */
 189struct sh_machine_vector mv_edosk7760 __initmv = {
 190        .mv_name        = "EDOSK7760",
 191};
 192