linux/arch/sh/boards/mach-highlander/setup.c
<<
>>
Prefs
   1/*
   2 * arch/sh/boards/renesas/r7780rp/setup.c
   3 *
   4 * Renesas Solutions Highlander Support.
   5 *
   6 * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
   7 * Copyright (C) 2005 - 2008 Paul Mundt
   8 *
   9 * This contains support for the R7780RP-1, R7780MP, and R7785RP
  10 * Highlander modules.
  11 *
  12 * This file is subject to the terms and conditions of the GNU General Public
  13 * License.  See the file "COPYING" in the main directory of this archive
  14 * for more details.
  15 */
  16#include <linux/init.h>
  17#include <linux/io.h>
  18#include <linux/platform_device.h>
  19#include <linux/ata_platform.h>
  20#include <linux/types.h>
  21#include <linux/mtd/physmap.h>
  22#include <linux/i2c.h>
  23#include <linux/irq.h>
  24#include <linux/interrupt.h>
  25#include <linux/usb/r8a66597.h>
  26#include <linux/usb/m66592.h>
  27#include <linux/clkdev.h>
  28#include <net/ax88796.h>
  29#include <asm/machvec.h>
  30#include <mach/highlander.h>
  31#include <asm/clock.h>
  32#include <asm/heartbeat.h>
  33#include <asm/io.h>
  34#include <asm/io_trapped.h>
  35
  36static struct r8a66597_platdata r8a66597_data = {
  37        .xtal = R8A66597_PLATDATA_XTAL_12MHZ,
  38        .vif = 1,
  39};
  40
  41static struct resource r8a66597_usb_host_resources[] = {
  42        [0] = {
  43                .start  = 0xA4200000,
  44                .end    = 0xA42000FF,
  45                .flags  = IORESOURCE_MEM,
  46        },
  47        [1] = {
  48                .start  = IRQ_EXT1,             /* irq number */
  49                .end    = IRQ_EXT1,
  50                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
  51        },
  52};
  53
  54static struct platform_device r8a66597_usb_host_device = {
  55        .name           = "r8a66597_hcd",
  56        .id             = -1,
  57        .dev = {
  58                .dma_mask               = NULL,         /* don't use dma */
  59                .coherent_dma_mask      = 0xffffffff,
  60                .platform_data          = &r8a66597_data,
  61        },
  62        .num_resources  = ARRAY_SIZE(r8a66597_usb_host_resources),
  63        .resource       = r8a66597_usb_host_resources,
  64};
  65
  66static struct m66592_platdata usbf_platdata = {
  67        .xtal = M66592_PLATDATA_XTAL_24MHZ,
  68        .vif = 1,
  69};
  70
  71static struct resource m66592_usb_peripheral_resources[] = {
  72        [0] = {
  73                .name   = "m66592_udc",
  74                .start  = 0xb0000000,
  75                .end    = 0xb00000FF,
  76                .flags  = IORESOURCE_MEM,
  77        },
  78        [1] = {
  79                .name   = "m66592_udc",
  80                .start  = IRQ_EXT4,             /* irq number */
  81                .end    = IRQ_EXT4,
  82                .flags  = IORESOURCE_IRQ,
  83        },
  84};
  85
  86static struct platform_device m66592_usb_peripheral_device = {
  87        .name           = "m66592_udc",
  88        .id             = -1,
  89        .dev = {
  90                .dma_mask               = NULL,         /* don't use dma */
  91                .coherent_dma_mask      = 0xffffffff,
  92                .platform_data          = &usbf_platdata,
  93        },
  94        .num_resources  = ARRAY_SIZE(m66592_usb_peripheral_resources),
  95        .resource       = m66592_usb_peripheral_resources,
  96};
  97
  98static struct resource cf_ide_resources[] = {
  99        [0] = {
 100                .start  = PA_AREA5_IO + 0x1000,
 101                .end    = PA_AREA5_IO + 0x1000 + 0x08 - 1,
 102                .flags  = IORESOURCE_MEM,
 103        },
 104        [1] = {
 105                .start  = PA_AREA5_IO + 0x80c,
 106                .end    = PA_AREA5_IO + 0x80c + 0x16 - 1,
 107                .flags  = IORESOURCE_MEM,
 108        },
 109        [2] = {
 110                .start  = IRQ_CF,
 111                .flags  = IORESOURCE_IRQ,
 112        },
 113};
 114
 115static struct pata_platform_info pata_info = {
 116        .ioport_shift   = 1,
 117};
 118
 119static struct platform_device cf_ide_device  = {
 120        .name           = "pata_platform",
 121        .id             = -1,
 122        .num_resources  = ARRAY_SIZE(cf_ide_resources),
 123        .resource       = cf_ide_resources,
 124        .dev    = {
 125                .platform_data  = &pata_info,
 126        },
 127};
 128
 129static struct resource heartbeat_resources[] = {
 130        [0] = {
 131                .start  = PA_OBLED,
 132                .end    = PA_OBLED,
 133                .flags  = IORESOURCE_MEM,
 134        },
 135};
 136
 137#ifndef CONFIG_SH_R7785RP
 138static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
 139
 140static struct heartbeat_data heartbeat_data = {
 141        .bit_pos        = heartbeat_bit_pos,
 142        .nr_bits        = ARRAY_SIZE(heartbeat_bit_pos),
 143};
 144#endif
 145
 146static struct platform_device heartbeat_device = {
 147        .name           = "heartbeat",
 148        .id             = -1,
 149
 150        /* R7785RP has a slightly more sensible FPGA.. */
 151#ifndef CONFIG_SH_R7785RP
 152        .dev    = {
 153                .platform_data  = &heartbeat_data,
 154        },
 155#endif
 156        .num_resources  = ARRAY_SIZE(heartbeat_resources),
 157        .resource       = heartbeat_resources,
 158};
 159
 160static struct ax_plat_data ax88796_platdata = {
 161        .flags          = AXFLG_HAS_93CX6,
 162        .wordlength     = 2,
 163        .dcr_val        = 0x1,
 164        .rcr_val        = 0x40,
 165};
 166
 167static struct resource ax88796_resources[] = {
 168        {
 169#ifdef CONFIG_SH_R7780RP
 170                .start  = 0xa5800400,
 171                .end    = 0xa5800400 + (0x20 * 0x2) - 1,
 172#else
 173                .start  = 0xa4100400,
 174                .end    = 0xa4100400 + (0x20 * 0x2) - 1,
 175#endif
 176                .flags  = IORESOURCE_MEM,
 177        },
 178        {
 179                .start  = IRQ_AX88796,
 180                .end    = IRQ_AX88796,
 181                .flags  = IORESOURCE_IRQ,
 182        },
 183};
 184
 185static struct platform_device ax88796_device = {
 186        .name           = "ax88796",
 187        .id             = 0,
 188
 189        .dev    = {
 190                .platform_data = &ax88796_platdata,
 191        },
 192
 193        .num_resources  = ARRAY_SIZE(ax88796_resources),
 194        .resource       = ax88796_resources,
 195};
 196
 197static struct mtd_partition nor_flash_partitions[] = {
 198        {
 199                .name           = "loader",
 200                .offset         = 0x00000000,
 201                .size           = 512 * 1024,
 202        },
 203        {
 204                .name           = "bootenv",
 205                .offset         = MTDPART_OFS_APPEND,
 206                .size           = 512 * 1024,
 207        },
 208        {
 209                .name           = "kernel",
 210                .offset         = MTDPART_OFS_APPEND,
 211                .size           = 4 * 1024 * 1024,
 212        },
 213        {
 214                .name           = "data",
 215                .offset         = MTDPART_OFS_APPEND,
 216                .size           = MTDPART_SIZ_FULL,
 217        },
 218};
 219
 220static struct physmap_flash_data nor_flash_data = {
 221        .width          = 4,
 222        .parts          = nor_flash_partitions,
 223        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
 224};
 225
 226/* This config is flash board for mass production. */
 227static struct resource nor_flash_resources[] = {
 228        [0]     = {
 229                .start  = PA_NORFLASH_ADDR,
 230                .end    = PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
 231                .flags  = IORESOURCE_MEM,
 232        }
 233};
 234
 235static struct platform_device nor_flash_device = {
 236        .name           = "physmap-flash",
 237        .dev            = {
 238                .platform_data  = &nor_flash_data,
 239        },
 240        .num_resources  = ARRAY_SIZE(nor_flash_resources),
 241        .resource       = nor_flash_resources,
 242};
 243
 244static struct resource smbus_resources[] = {
 245        [0] = {
 246                .start  = PA_SMCR,
 247                .end    = PA_SMCR + 0x100 - 1,
 248                .flags  = IORESOURCE_MEM,
 249        },
 250        [1] = {
 251                .start  = IRQ_SMBUS,
 252                .end    = IRQ_SMBUS,
 253                .flags  = IORESOURCE_IRQ,
 254        },
 255};
 256
 257static struct platform_device smbus_device = {
 258        .name           = "i2c-highlander",
 259        .id             = 0,
 260        .num_resources  = ARRAY_SIZE(smbus_resources),
 261        .resource       = smbus_resources,
 262};
 263
 264static struct i2c_board_info __initdata highlander_i2c_devices[] = {
 265        {
 266                I2C_BOARD_INFO("r2025sd", 0x32),
 267        },
 268};
 269
 270static struct platform_device *r7780rp_devices[] __initdata = {
 271        &r8a66597_usb_host_device,
 272        &m66592_usb_peripheral_device,
 273        &heartbeat_device,
 274        &smbus_device,
 275        &nor_flash_device,
 276#ifndef CONFIG_SH_R7780RP
 277        &ax88796_device,
 278#endif
 279};
 280
 281/*
 282 * The CF is connected using a 16-bit bus where 8-bit operations are
 283 * unsupported. The linux ata driver is however using 8-bit operations, so
 284 * insert a trapped io filter to convert 8-bit operations into 16-bit.
 285 */
 286static struct trapped_io cf_trapped_io = {
 287        .resource               = cf_ide_resources,
 288        .num_resources          = 2,
 289        .minimum_bus_width      = 16,
 290};
 291
 292static int __init r7780rp_devices_setup(void)
 293{
 294        int ret = 0;
 295
 296#ifndef CONFIG_SH_R7780RP
 297        if (register_trapped_io(&cf_trapped_io) == 0)
 298                ret |= platform_device_register(&cf_ide_device);
 299#endif
 300
 301        ret |= platform_add_devices(r7780rp_devices,
 302                                    ARRAY_SIZE(r7780rp_devices));
 303
 304        ret |= i2c_register_board_info(0, highlander_i2c_devices,
 305                                       ARRAY_SIZE(highlander_i2c_devices));
 306
 307        return ret;
 308}
 309device_initcall(r7780rp_devices_setup);
 310
 311/*
 312 * Platform specific clocks
 313 */
 314static int ivdr_clk_enable(struct clk *clk)
 315{
 316        __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
 317        return 0;
 318}
 319
 320static void ivdr_clk_disable(struct clk *clk)
 321{
 322        __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
 323}
 324
 325static struct sh_clk_ops ivdr_clk_ops = {
 326        .enable         = ivdr_clk_enable,
 327        .disable        = ivdr_clk_disable,
 328};
 329
 330static struct clk ivdr_clk = {
 331        .ops            = &ivdr_clk_ops,
 332};
 333
 334static struct clk *r7780rp_clocks[] = {
 335        &ivdr_clk,
 336};
 337
 338static struct clk_lookup lookups[] = {
 339        /* main clocks */
 340        CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
 341};
 342
 343static void r7780rp_power_off(void)
 344{
 345        if (mach_is_r7780mp() || mach_is_r7785rp())
 346                __raw_writew(0x0001, PA_POFF);
 347}
 348
 349/*
 350 * Initialize the board
 351 */
 352static void __init highlander_setup(char **cmdline_p)
 353{
 354        u16 ver = __raw_readw(PA_VERREG);
 355        int i;
 356
 357        printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
 358                         mach_is_r7780rp() ? "R7780RP-1" :
 359                         mach_is_r7780mp() ? "R7780MP"   :
 360                                             "R7785RP");
 361
 362        printk(KERN_INFO "Board version: %d (revision %d), "
 363                         "FPGA version: %d (revision %d)\n",
 364                         (ver >> 12) & 0xf, (ver >> 8) & 0xf,
 365                         (ver >>  4) & 0xf, ver & 0xf);
 366
 367        highlander_plat_pinmux_setup();
 368
 369        /*
 370         * Enable the important clocks right away..
 371         */
 372        for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
 373                struct clk *clk = r7780rp_clocks[i];
 374
 375                clk_register(clk);
 376                clk_enable(clk);
 377        }
 378
 379        clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 380
 381        __raw_writew(0x0000, PA_OBLED); /* Clear LED. */
 382
 383        if (mach_is_r7780rp())
 384                __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
 385
 386        __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);       /* Si13112 */
 387
 388        pm_power_off = r7780rp_power_off;
 389}
 390
 391static unsigned char irl2irq[HL_NR_IRL];
 392
 393static int highlander_irq_demux(int irq)
 394{
 395        if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
 396                return irq;
 397
 398        return irl2irq[irq];
 399}
 400
 401static void __init highlander_init_irq(void)
 402{
 403        unsigned char *ucp = highlander_plat_irq_setup();
 404
 405        if (ucp) {
 406                plat_irq_setup_pins(IRQ_MODE_IRL3210);
 407                memcpy(irl2irq, ucp, HL_NR_IRL);
 408        }
 409}
 410
 411/*
 412 * The Machine Vector
 413 */
 414static struct sh_machine_vector mv_highlander __initmv = {
 415        .mv_name                = "Highlander",
 416        .mv_setup               = highlander_setup,
 417        .mv_init_irq            = highlander_init_irq,
 418        .mv_irq_demux           = highlander_irq_demux,
 419};
 420