/*
 *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
 *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
 * that is iMac G5 and latest single CPU desktop.
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/mutex.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/cputable.h>
#include <asm/time.h>
#include <asm/smu.h>
#include <asm/pmac_pfunc.h>

#define DBG(fmt...) pr_debug(fmt)

/* see 970FX user manual */

#define SCOM_PCR 0x0aa001                       /* PCR scom addr */

#define PCR_HILO_SELECT         0x80000000U     /* 1 = PCR, 0 = PCRH */
#define PCR_SPEED_FULL          0x00000000U     /* 1:1 speed value */
#define PCR_SPEED_HALF          0x00020000U     /* 1:2 speed value */
#define PCR_SPEED_QUARTER       0x00040000U     /* 1:4 speed value */
#define PCR_SPEED_MASK          0x000e0000U     /* speed mask */
#define PCR_SPEED_SHIFT         17
#define PCR_FREQ_REQ_VALID      0x00010000U     /* freq request valid */
#define PCR_VOLT_REQ_VALID      0x00008000U     /* volt request valid */
#define PCR_TARGET_TIME_MASK    0x00006000U     /* target time */
#define PCR_STATLAT_MASK        0x00001f00U     /* STATLAT value */
#define PCR_SNOOPLAT_MASK       0x000000f0U     /* SNOOPLAT value */
#define PCR_SNOOPACC_MASK       0x0000000fU     /* SNOOPACC value */

#define SCOM_PSR 0x408001                       /* PSR scom addr */
/* warning: PSR is a 64 bits register */
#define PSR_CMD_RECEIVED        0x2000000000000000U   /* command received */
#define PSR_CMD_COMPLETED       0x1000000000000000U   /* command completed */
#define PSR_CUR_SPEED_MASK      0x0300000000000000U   /* current speed */
#define PSR_CUR_SPEED_SHIFT     (56)

/*
 * The G5 only supports two frequencies (Quarter speed is not supported)
 */
#define CPUFREQ_HIGH                  0
#define CPUFREQ_LOW                   1

static struct cpufreq_frequency_table g5_cpu_freqs[] = {
        {CPUFREQ_HIGH,          0},
        {CPUFREQ_LOW,           0},
        {0,                     CPUFREQ_TABLE_END},
};

static struct freq_attr* g5_cpu_freqs_attr[] = {
        &cpufreq_freq_attr_scaling_available_freqs,
        NULL,
};

/* Power mode data is an array of the 32 bits PCR values to use for
 * the various frequencies, retrieved from the device-tree
 */
static int g5_pmode_cur;

static void (*g5_switch_volt)(int speed_mode);
static int (*g5_switch_freq)(int speed_mode);
static int (*g5_query_freq)(void);

static DEFINE_MUTEX(g5_switch_mutex);

static unsigned long transition_latency;

#ifdef CONFIG_PMAC_SMU

static const u32 *g5_pmode_data;
static int g5_pmode_max;

static struct smu_sdbp_fvt *g5_fvt_table;       /* table of op. points */
static int g5_fvt_count;                        /* number of op. points */
static int g5_fvt_cur;                          /* current op. point */

/*
 * SMU based voltage switching for Neo2 platforms
 */

static void g5_smu_switch_volt(int speed_mode)
{
        struct smu_simple_cmd   cmd;

        DECLARE_COMPLETION_ONSTACK(comp);
        smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
                         &comp, 'V', 'S', 'L', 'E', 'W',
                         0xff, g5_fvt_cur+1, speed_mode);
        wait_for_completion(&comp);
}

/*
 * Platform function based voltage/vdnap switching for Neo2
 */

static struct pmf_function *pfunc_set_vdnap0;
static struct pmf_function *pfunc_vdnap0_complete;

static void g5_vdnap_switch_volt(int speed_mode)
{
        struct pmf_args args;
        u32 slew, done = 0;
        unsigned long timeout;

        slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
        args.count = 1;
        args.u[0].p = &slew;

        pmf_call_one(pfunc_set_vdnap0, &args);

        /* It's an irq GPIO so we should be able to just block here,
         * I'll do that later after I've properly tested the IRQ code for
         * platform functions
         */
        timeout = jiffies + HZ/10;
        while(!time_after(jiffies, timeout)) {
                args.count = 1;
                args.u[0].p = &done;
                pmf_call_one(pfunc_vdnap0_complete, &args);
                if (done)
                        break;
                msleep(1);
        }
        if (done == 0)
                printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
}


/*
 * SCOM based frequency switching for 970FX rev3
 */
static int g5_scom_switch_freq(int speed_mode)
{
        unsigned long flags;
        int to;

        /* If frequency is going up, first ramp up the voltage */
        if (speed_mode < g5_pmode_cur)
                g5_switch_volt(speed_mode);

        local_irq_save(flags);

        /* Clear PCR high */
        scom970_write(SCOM_PCR, 0);
        /* Clear PCR low */
        scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
        /* Set PCR low */
        scom970_write(SCOM_PCR, PCR_HILO_SELECT |
                      g5_pmode_data[speed_mode]);

        /* Wait for completion */
        for (to = 0; to < 10; to++) {
                unsigned long psr = scom970_read(SCOM_PSR);

                if ((psr & PSR_CMD_RECEIVED) == 0 &&
                    (((psr >> PSR_CUR_SPEED_SHIFT) ^
                      (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
                    == 0)
                        break;
                if (psr & PSR_CMD_COMPLETED)
                        break;
                udelay(100);
        }

        local_irq_restore(flags);

        /* If frequency is going down, last ramp the voltage */
        if (speed_mode > g5_pmode_cur)
                g5_switch_volt(speed_mode);

        g5_pmode_cur = speed_mode;
        ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;

        return 0;
}

static int g5_scom_query_freq(void)
{
        unsigned long psr = scom970_read(SCOM_PSR);
        int i;

        for (i = 0; i <= g5_pmode_max; i++)
                if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
                      (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
                        break;
        return i;
}

/*
 * Fake voltage switching for platforms with missing support
 */

static void g5_dummy_switch_volt(int speed_mode)
{
}

#endif /* CONFIG_PMAC_SMU */

/*
 * Platform function based voltage switching for PowerMac7,2 & 7,3
 */

static struct pmf_function *pfunc_cpu0_volt_high;
static struct pmf_function *pfunc_cpu0_volt_low;
static struct pmf_function *pfunc_cpu1_volt_high;
static struct pmf_function *pfunc_cpu1_volt_low;

static void g5_pfunc_switch_volt(int speed_mode)
{
        if (speed_mode == CPUFREQ_HIGH) {
                if (pfunc_cpu0_volt_high)
                        pmf_call_one(pfunc_cpu0_volt_high, NULL);
                if (pfunc_cpu1_volt_high)
                        pmf_call_one(pfunc_cpu1_volt_high, NULL);
        } else {
                if (pfunc_cpu0_volt_low)
                        pmf_call_one(pfunc_cpu0_volt_low, NULL);
                if (pfunc_cpu1_volt_low)
                        pmf_call_one(pfunc_cpu1_volt_low, NULL);
        }
        msleep(10); /* should be faster , to fix */
}

/*
 * Platform function based frequency switching for PowerMac7,2 & 7,3
 */

static struct pmf_function *pfunc_cpu_setfreq_high;
static struct pmf_function *pfunc_cpu_setfreq_low;
static struct pmf_function *pfunc_cpu_getfreq;
static struct pmf_function *pfunc_slewing_done;

static int g5_pfunc_switch_freq(int speed_mode)
{
        struct pmf_args args;
        u32 done = 0;
        unsigned long timeout;
        int rc;

        DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);

        /* If frequency is going up, first ramp up the voltage */
        if (speed_mode < g5_pmode_cur)
                g5_switch_volt(speed_mode);

        /* Do it */
        if (speed_mode == CPUFREQ_HIGH)
                rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
        else
                rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);

        if (rc)
                printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);

        /* It's an irq GPIO so we should be able to just block here,
         * I'll do that later after I've properly tested the IRQ code for
         * platform functions
         */
        timeout = jiffies + HZ/10;
        while(!time_after(jiffies, timeout)) {
                args.count = 1;
                args.u[0].p = &done;
                pmf_call_one(pfunc_slewing_done, &args);
                if (done)
                        break;
                msleep(1);
        }
        if (done == 0)
                printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");

        /* If frequency is going down, last ramp the voltage */
        if (speed_mode > g5_pmode_cur)
                g5_switch_volt(speed_mode);

        g5_pmode_cur = speed_mode;
        ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;

        return 0;
}

static int g5_pfunc_query_freq(void)
{
        struct pmf_args args;
        u32 val = 0;

        args.count = 1;
        args.u[0].p = &val;
        pmf_call_one(pfunc_cpu_getfreq, &args);
        return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
}


/*
 * Common interface to the cpufreq core
 */

static int g5_cpufreq_verify(struct cpufreq_policy *policy)
{
        return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
}

static int g5_cpufreq_target(struct cpufreq_policy *policy,
        unsigned int target_freq, unsigned int relation)
{
        unsigned int newstate = 0;
        struct cpufreq_freqs freqs;
        int rc;

        if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
                        target_freq, relation, &newstate))
                return -EINVAL;

        if (g5_pmode_cur == newstate)
                return 0;

        mutex_lock(&g5_switch_mutex);

        freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
        freqs.new = g5_cpu_freqs[newstate].frequency;

        cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
        rc = g5_switch_freq(newstate);
        cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);

        mutex_unlock(&g5_switch_mutex);

        return rc;
}

static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
{
        return g5_cpu_freqs[g5_pmode_cur].frequency;
}

static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
        policy->cpuinfo.transition_latency = transition_latency;
        policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
        /* secondary CPUs are tied to the primary one by the
         * cpufreq core if in the secondary policy we tell it that
         * it actually must be one policy together with all others. */
        cpumask_copy(policy->cpus, cpu_online_mask);
        cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);

        return cpufreq_frequency_table_cpuinfo(policy,
                g5_cpu_freqs);
}


static struct cpufreq_driver g5_cpufreq_driver = {
        .name           = "powermac",
        .owner          = THIS_MODULE,
        .flags          = CPUFREQ_CONST_LOOPS,
        .init           = g5_cpufreq_cpu_init,
        .verify         = g5_cpufreq_verify,
        .target         = g5_cpufreq_target,
        .get            = g5_cpufreq_get_speed,
        .attr           = g5_cpu_freqs_attr,
};


#ifdef CONFIG_PMAC_SMU

static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
{
        struct device_node *cpunode;
        unsigned int psize, ssize;
        unsigned long max_freq;
        char *freq_method, *volt_method;
        const u32 *valp;
        u32 pvr_hi;
        int use_volts_vdnap = 0;
        int use_volts_smu = 0;
        int rc = -ENODEV;

        /* Check supported platforms */
        if (of_machine_is_compatible("PowerMac8,1") ||
            of_machine_is_compatible("PowerMac8,2") ||
            of_machine_is_compatible("PowerMac9,1"))
                use_volts_smu = 1;
        else if (of_machine_is_compatible("PowerMac11,2"))
                use_volts_vdnap = 1;
        else
                return -ENODEV;

        /* Get first CPU node */
        for (cpunode = NULL;
             (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
                const u32 *reg = of_get_property(cpunode, "reg", NULL);
                if (reg == NULL || (*reg) != 0)
                        continue;
                if (!strcmp(cpunode->type, "cpu"))
                        break;
        }
        if (cpunode == NULL) {
                printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
                return -ENODEV;
        }

        /* Check 970FX for now */
        valp = of_get_property(cpunode, "cpu-version", NULL);
        if (!valp) {
                DBG("No cpu-version property !\n");
                goto bail_noprops;
        }
        pvr_hi = (*valp) >> 16;
        if (pvr_hi != 0x3c && pvr_hi != 0x44) {
                printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
                goto bail_noprops;
        }

        /* Look for the powertune data in the device-tree */
        g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
        if (!g5_pmode_data) {
                DBG("No power-mode-data !\n");
                goto bail_noprops;
        }
        g5_pmode_max = psize / sizeof(u32) - 1;

        if (use_volts_smu) {
                const struct smu_sdbp_header *shdr;

                /* Look for the FVT table */
                shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
                if (!shdr)
                        goto bail_noprops;
                g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
                ssize = (shdr->len * sizeof(u32)) -
                        sizeof(struct smu_sdbp_header);
                g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
                g5_fvt_cur = 0;

                /* Sanity checking */
                if (g5_fvt_count < 1 || g5_pmode_max < 1)
                        goto bail_noprops;

                g5_switch_volt = g5_smu_switch_volt;
                volt_method = "SMU";
        } else if (use_volts_vdnap) {
                struct device_node *root;

                root = of_find_node_by_path("/");
                if (root == NULL) {
                        printk(KERN_ERR "cpufreq: Can't find root of "
                               "device tree\n");
                        goto bail_noprops;
                }
                pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
                pfunc_vdnap0_complete =
                        pmf_find_function(root, "slewing-done");
                if (pfunc_set_vdnap0 == NULL ||
                    pfunc_vdnap0_complete == NULL) {
                        printk(KERN_ERR "cpufreq: Can't find required "
                               "platform function\n");
                        goto bail_noprops;
                }

                g5_switch_volt = g5_vdnap_switch_volt;
                volt_method = "GPIO";
        } else {
                g5_switch_volt = g5_dummy_switch_volt;
                volt_method = "none";
        }

        /*
         * From what I see, clock-frequency is always the maximal frequency.
         * The current driver can not slew sysclk yet, so we really only deal
         * with powertune steps for now. We also only implement full freq and
         * half freq in this version. So far, I haven't yet seen a machine
         * supporting anything else.
         */
        valp = of_get_property(cpunode, "clock-frequency", NULL);
        if (!valp)
                return -ENODEV;
        max_freq = (*valp)/1000;
        g5_cpu_freqs[0].frequency = max_freq;
        g5_cpu_freqs[1].frequency = max_freq/2;

        /* Set callbacks */
        transition_latency = 12000;
        g5_switch_freq = g5_scom_switch_freq;
        g5_query_freq = g5_scom_query_freq;
        freq_method = "SCOM";

        /* Force apply current frequency to make sure everything is in
         * sync (voltage is right for example). Firmware may leave us with
         * a strange setting ...
         */
        g5_switch_volt(CPUFREQ_HIGH);
        msleep(10);
        g5_pmode_cur = -1;
        g5_switch_freq(g5_query_freq());

        printk(KERN_INFO "Registering G5 CPU frequency driver\n");
        printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
               freq_method, volt_method);
        printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
                g5_cpu_freqs[1].frequency/1000,
                g5_cpu_freqs[0].frequency/1000,
                g5_cpu_freqs[g5_pmode_cur].frequency/1000);

        rc = cpufreq_register_driver(&g5_cpufreq_driver);

        /* We keep the CPU node on hold... hopefully, Apple G5 don't have
         * hotplug CPU with a dynamic device-tree ...
         */
        return rc;

 bail_noprops:
        of_node_put(cpunode);

        return rc;
}

#endif /* CONFIG_PMAC_SMU */


static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
{
        struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
        const u8 *eeprom = NULL;
        const u32 *valp;
        u64 max_freq, min_freq, ih, il;
        int has_volt = 1, rc = 0;

        DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
            " RackMac3,1...\n");

        /* Get first CPU node */
        for (cpunode = NULL;
             (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
                if (!strcmp(cpunode->type, "cpu"))
                        break;
        }
        if (cpunode == NULL) {
                printk(KERN_ERR "cpufreq: Can't find any CPU node\n");
                return -ENODEV;
        }

        /* Lookup the cpuid eeprom node */
        cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
        if (cpuid != NULL)
                eeprom = of_get_property(cpuid, "cpuid", NULL);
        if (eeprom == NULL) {
                printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
                rc = -ENODEV;
                goto bail;
        }

        /* Lookup the i2c hwclock */
        for (hwclock = NULL;
             (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
                const char *loc = of_get_property(hwclock,
                                "hwctrl-location", NULL);
                if (loc == NULL)
                        continue;
                if (strcmp(loc, "CPU CLOCK"))
                        continue;
                if (!of_get_property(hwclock, "platform-get-frequency", NULL))
                        continue;
                break;
        }
        if (hwclock == NULL) {
                printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
                rc = -ENODEV;
                goto bail;
        }

        DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);

        /* Now get all the platform functions */
        pfunc_cpu_getfreq =
                pmf_find_function(hwclock, "get-frequency");
        pfunc_cpu_setfreq_high =
                pmf_find_function(hwclock, "set-frequency-high");
        pfunc_cpu_setfreq_low =
                pmf_find_function(hwclock, "set-frequency-low");
        pfunc_slewing_done =
                pmf_find_function(hwclock, "slewing-done");
        pfunc_cpu0_volt_high =
                pmf_find_function(hwclock, "set-voltage-high-0");
        pfunc_cpu0_volt_low =
                pmf_find_function(hwclock, "set-voltage-low-0");
        pfunc_cpu1_volt_high =
                pmf_find_function(hwclock, "set-voltage-high-1");
        pfunc_cpu1_volt_low =
                pmf_find_function(hwclock, "set-voltage-low-1");

        /* Check we have minimum requirements */
        if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
            pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
                printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
                rc = -ENODEV;
                goto bail;
        }

        /* Check that we have complete sets */
        if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
                pmf_put_function(pfunc_cpu0_volt_high);
                pmf_put_function(pfunc_cpu0_volt_low);
                pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
                has_volt = 0;
        }
        if (!has_volt ||
            pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
                pmf_put_function(pfunc_cpu1_volt_high);
                pmf_put_function(pfunc_cpu1_volt_low);
                pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
        }

        /* Note: The device tree also contains a "platform-set-values"
         * function for which I haven't quite figured out the usage. It
         * might have to be called on init and/or wakeup, I'm not too sure
         * but things seem to work fine without it so far ...
         */

        /* Get max frequency from device-tree */
        valp = of_get_property(cpunode, "clock-frequency", NULL);
        if (!valp) {
                printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
                rc = -ENODEV;
                goto bail;
        }

        max_freq = (*valp)/1000;

        /* Now calculate reduced frequency by using the cpuid input freq
         * ratio. This requires 64 bits math unless we are willing to lose
         * some precision
         */
        ih = *((u32 *)(eeprom + 0x10));
        il = *((u32 *)(eeprom + 0x20));

        /* Check for machines with no useful settings */
        if (il == ih) {
                printk(KERN_WARNING "cpufreq: No low frequency mode available"
                       " on this model !\n");
                rc = -ENODEV;
                goto bail;
        }

        min_freq = 0;
        if (ih != 0 && il != 0)
                min_freq = (max_freq * il) / ih;

        /* Sanity check */
        if (min_freq >= max_freq || min_freq < 1000) {
                printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
                rc = -ENXIO;
                goto bail;
        }
        g5_cpu_freqs[0].frequency = max_freq;
        g5_cpu_freqs[1].frequency = min_freq;

        /* Set callbacks */
        transition_latency = CPUFREQ_ETERNAL;
        g5_switch_volt = g5_pfunc_switch_volt;
        g5_switch_freq = g5_pfunc_switch_freq;
        g5_query_freq = g5_pfunc_query_freq;

        /* Force apply current frequency to make sure everything is in
         * sync (voltage is right for example). Firmware may leave us with
         * a strange setting ...
         */
        g5_switch_volt(CPUFREQ_HIGH);
        msleep(10);
        g5_pmode_cur = -1;
        g5_switch_freq(g5_query_freq());

        printk(KERN_INFO "Registering G5 CPU frequency driver\n");
        printk(KERN_INFO "Frequency method: i2c/pfunc, "
               "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
        printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
                g5_cpu_freqs[1].frequency/1000,
                g5_cpu_freqs[0].frequency/1000,
                g5_cpu_freqs[g5_pmode_cur].frequency/1000);

        rc = cpufreq_register_driver(&g5_cpufreq_driver);
 bail:
        if (rc != 0) {
                pmf_put_function(pfunc_cpu_getfreq);
                pmf_put_function(pfunc_cpu_setfreq_high);
                pmf_put_function(pfunc_cpu_setfreq_low);
                pmf_put_function(pfunc_slewing_done);
                pmf_put_function(pfunc_cpu0_volt_high);
                pmf_put_function(pfunc_cpu0_volt_low);
                pmf_put_function(pfunc_cpu1_volt_high);
                pmf_put_function(pfunc_cpu1_volt_low);
        }
        of_node_put(hwclock);
        of_node_put(cpuid);
        of_node_put(cpunode);

        return rc;
}

static int __init g5_cpufreq_init(void)
{
        struct device_node *cpus;
        int rc = 0;

        cpus = of_find_node_by_path("/cpus");
        if (cpus == NULL) {
                DBG("No /cpus node !\n");
                return -ENODEV;
        }

        if (of_machine_is_compatible("PowerMac7,2") ||
            of_machine_is_compatible("PowerMac7,3") ||
            of_machine_is_compatible("RackMac3,1"))
                rc = g5_pm72_cpufreq_init(cpus);
#ifdef CONFIG_PMAC_SMU
        else
                rc = g5_neo2_cpufreq_init(cpus);
#endif /* CONFIG_PMAC_SMU */

        of_node_put(cpus);
        return rc;
}

module_init(g5_cpufreq_init);


MODULE_LICENSE("GPL");