linux/drivers/firmware/google/gsmi.c
<<
>>
Prefs
   1/*
   2 * Copyright 2010 Google Inc. All Rights Reserved.
   3 * Author: dlaurie@google.com (Duncan Laurie)
   4 *
   5 * Re-worked to expose sysfs APIs by mikew@google.com (Mike Waychison)
   6 *
   7 * EFI SMI interface for Google platforms
   8 */
   9
  10#include <linux/kernel.h>
  11#include <linux/init.h>
  12#include <linux/types.h>
  13#include <linux/device.h>
  14#include <linux/platform_device.h>
  15#include <linux/errno.h>
  16#include <linux/string.h>
  17#include <linux/spinlock.h>
  18#include <linux/dma-mapping.h>
  19#include <linux/dmapool.h>
  20#include <linux/fs.h>
  21#include <linux/slab.h>
  22#include <linux/ioctl.h>
  23#include <linux/acpi.h>
  24#include <linux/io.h>
  25#include <linux/uaccess.h>
  26#include <linux/dmi.h>
  27#include <linux/kdebug.h>
  28#include <linux/reboot.h>
  29#include <linux/efi.h>
  30#include <linux/module.h>
  31#include <linux/ucs2_string.h>
  32
  33#define GSMI_SHUTDOWN_CLEAN     0       /* Clean Shutdown */
  34/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
  35#define GSMI_SHUTDOWN_NMIWDT    1       /* NMI Watchdog */
  36#define GSMI_SHUTDOWN_PANIC     2       /* Panic */
  37#define GSMI_SHUTDOWN_OOPS      3       /* Oops */
  38#define GSMI_SHUTDOWN_DIE       4       /* Die -- No longer meaningful */
  39#define GSMI_SHUTDOWN_MCE       5       /* Machine Check */
  40#define GSMI_SHUTDOWN_SOFTWDT   6       /* Software Watchdog */
  41#define GSMI_SHUTDOWN_MBE       7       /* Uncorrected ECC */
  42#define GSMI_SHUTDOWN_TRIPLE    8       /* Triple Fault */
  43
  44#define DRIVER_VERSION          "1.0"
  45#define GSMI_GUID_SIZE          16
  46#define GSMI_BUF_SIZE           1024
  47#define GSMI_BUF_ALIGN          sizeof(u64)
  48#define GSMI_CALLBACK           0xef
  49
  50/* SMI return codes */
  51#define GSMI_SUCCESS            0x00
  52#define GSMI_UNSUPPORTED2       0x03
  53#define GSMI_LOG_FULL           0x0b
  54#define GSMI_VAR_NOT_FOUND      0x0e
  55#define GSMI_HANDSHAKE_SPIN     0x7d
  56#define GSMI_HANDSHAKE_CF       0x7e
  57#define GSMI_HANDSHAKE_NONE     0x7f
  58#define GSMI_INVALID_PARAMETER  0x82
  59#define GSMI_UNSUPPORTED        0x83
  60#define GSMI_BUFFER_TOO_SMALL   0x85
  61#define GSMI_NOT_READY          0x86
  62#define GSMI_DEVICE_ERROR       0x87
  63#define GSMI_NOT_FOUND          0x8e
  64
  65#define QUIRKY_BOARD_HASH 0x78a30a50
  66
  67/* Internally used commands passed to the firmware */
  68#define GSMI_CMD_GET_NVRAM_VAR          0x01
  69#define GSMI_CMD_GET_NEXT_VAR           0x02
  70#define GSMI_CMD_SET_NVRAM_VAR          0x03
  71#define GSMI_CMD_SET_EVENT_LOG          0x08
  72#define GSMI_CMD_CLEAR_EVENT_LOG        0x09
  73#define GSMI_CMD_CLEAR_CONFIG           0x20
  74#define GSMI_CMD_HANDSHAKE_TYPE         0xC1
  75
  76/* Magic entry type for kernel events */
  77#define GSMI_LOG_ENTRY_TYPE_KERNEL     0xDEAD
  78
  79/* SMI buffers must be in 32bit physical address space */
  80struct gsmi_buf {
  81        u8 *start;                      /* start of buffer */
  82        size_t length;                  /* length of buffer */
  83        dma_addr_t handle;              /* dma allocation handle */
  84        u32 address;                    /* physical address of buffer */
  85};
  86
  87struct gsmi_device {
  88        struct platform_device *pdev;   /* platform device */
  89        struct gsmi_buf *name_buf;      /* variable name buffer */
  90        struct gsmi_buf *data_buf;      /* generic data buffer */
  91        struct gsmi_buf *param_buf;     /* parameter buffer */
  92        spinlock_t lock;                /* serialize access to SMIs */
  93        u16 smi_cmd;                    /* SMI command port */
  94        int handshake_type;             /* firmware handler interlock type */
  95        struct dma_pool *dma_pool;      /* DMA buffer pool */
  96} gsmi_dev;
  97
  98/* Packed structures for communicating with the firmware */
  99struct gsmi_nvram_var_param {
 100        efi_guid_t      guid;
 101        u32             name_ptr;
 102        u32             attributes;
 103        u32             data_len;
 104        u32             data_ptr;
 105} __packed;
 106
 107struct gsmi_get_next_var_param {
 108        u8      guid[GSMI_GUID_SIZE];
 109        u32     name_ptr;
 110        u32     name_len;
 111} __packed;
 112
 113struct gsmi_set_eventlog_param {
 114        u32     data_ptr;
 115        u32     data_len;
 116        u32     type;
 117} __packed;
 118
 119/* Event log formats */
 120struct gsmi_log_entry_type_1 {
 121        u16     type;
 122        u32     instance;
 123} __packed;
 124
 125
 126/*
 127 * Some platforms don't have explicit SMI handshake
 128 * and need to wait for SMI to complete.
 129 */
 130#define GSMI_DEFAULT_SPINCOUNT  0x10000
 131static unsigned int spincount = GSMI_DEFAULT_SPINCOUNT;
 132module_param(spincount, uint, 0600);
 133MODULE_PARM_DESC(spincount,
 134        "The number of loop iterations to use when using the spin handshake.");
 135
 136static struct gsmi_buf *gsmi_buf_alloc(void)
 137{
 138        struct gsmi_buf *smibuf;
 139
 140        smibuf = kzalloc(sizeof(*smibuf), GFP_KERNEL);
 141        if (!smibuf) {
 142                printk(KERN_ERR "gsmi: out of memory\n");
 143                return NULL;
 144        }
 145
 146        /* allocate buffer in 32bit address space */
 147        smibuf->start = dma_pool_alloc(gsmi_dev.dma_pool, GFP_KERNEL,
 148                                       &smibuf->handle);
 149        if (!smibuf->start) {
 150                printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
 151                kfree(smibuf);
 152                return NULL;
 153        }
 154
 155        /* fill in the buffer handle */
 156        smibuf->length = GSMI_BUF_SIZE;
 157        smibuf->address = (u32)virt_to_phys(smibuf->start);
 158
 159        return smibuf;
 160}
 161
 162static void gsmi_buf_free(struct gsmi_buf *smibuf)
 163{
 164        if (smibuf) {
 165                if (smibuf->start)
 166                        dma_pool_free(gsmi_dev.dma_pool, smibuf->start,
 167                                      smibuf->handle);
 168                kfree(smibuf);
 169        }
 170}
 171
 172/*
 173 * Make a call to gsmi func(sub).  GSMI error codes are translated to
 174 * in-kernel errnos (0 on success, -ERRNO on error).
 175 */
 176static int gsmi_exec(u8 func, u8 sub)
 177{
 178        u16 cmd = (sub << 8) | func;
 179        u16 result = 0;
 180        int rc = 0;
 181
 182        /*
 183         * AH  : Subfunction number
 184         * AL  : Function number
 185         * EBX : Parameter block address
 186         * DX  : SMI command port
 187         *
 188         * Three protocols here. See also the comment in gsmi_init().
 189         */
 190        if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_CF) {
 191                /*
 192                 * If handshake_type == HANDSHAKE_CF then set CF on the
 193                 * way in and wait for the handler to clear it; this avoids
 194                 * corrupting register state on those chipsets which have
 195                 * a delay between writing the SMI trigger register and
 196                 * entering SMM.
 197                 */
 198                asm volatile (
 199                        "stc\n"
 200                        "outb %%al, %%dx\n"
 201                "1:      jc 1b\n"
 202                        : "=a" (result)
 203                        : "0" (cmd),
 204                          "d" (gsmi_dev.smi_cmd),
 205                          "b" (gsmi_dev.param_buf->address)
 206                        : "memory", "cc"
 207                );
 208        } else if (gsmi_dev.handshake_type == GSMI_HANDSHAKE_SPIN) {
 209                /*
 210                 * If handshake_type == HANDSHAKE_SPIN we spin a
 211                 * hundred-ish usecs to ensure the SMI has triggered.
 212                 */
 213                asm volatile (
 214                        "outb %%al, %%dx\n"
 215                "1:      loop 1b\n"
 216                        : "=a" (result)
 217                        : "0" (cmd),
 218                          "d" (gsmi_dev.smi_cmd),
 219                          "b" (gsmi_dev.param_buf->address),
 220                          "c" (spincount)
 221                        : "memory", "cc"
 222                );
 223        } else {
 224                /*
 225                 * If handshake_type == HANDSHAKE_NONE we do nothing;
 226                 * either we don't need to or it's legacy firmware that
 227                 * doesn't understand the CF protocol.
 228                 */
 229                asm volatile (
 230                        "outb %%al, %%dx\n\t"
 231                        : "=a" (result)
 232                        : "0" (cmd),
 233                          "d" (gsmi_dev.smi_cmd),
 234                          "b" (gsmi_dev.param_buf->address)
 235                        : "memory", "cc"
 236                );
 237        }
 238
 239        /* check return code from SMI handler */
 240        switch (result) {
 241        case GSMI_SUCCESS:
 242                break;
 243        case GSMI_VAR_NOT_FOUND:
 244                /* not really an error, but let the caller know */
 245                rc = 1;
 246                break;
 247        case GSMI_INVALID_PARAMETER:
 248                printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
 249                rc = -EINVAL;
 250                break;
 251        case GSMI_BUFFER_TOO_SMALL:
 252                printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
 253                rc = -ENOMEM;
 254                break;
 255        case GSMI_UNSUPPORTED:
 256        case GSMI_UNSUPPORTED2:
 257                if (sub != GSMI_CMD_HANDSHAKE_TYPE)
 258                        printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
 259                               cmd);
 260                rc = -ENOSYS;
 261                break;
 262        case GSMI_NOT_READY:
 263                printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
 264                rc = -EBUSY;
 265                break;
 266        case GSMI_DEVICE_ERROR:
 267                printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
 268                rc = -EFAULT;
 269                break;
 270        case GSMI_NOT_FOUND:
 271                printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
 272                rc = -ENOENT;
 273                break;
 274        case GSMI_LOG_FULL:
 275                printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
 276                rc = -ENOSPC;
 277                break;
 278        case GSMI_HANDSHAKE_CF:
 279        case GSMI_HANDSHAKE_SPIN:
 280        case GSMI_HANDSHAKE_NONE:
 281                rc = result;
 282                break;
 283        default:
 284                printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
 285                       cmd, result);
 286                rc = -ENXIO;
 287        }
 288
 289        return rc;
 290}
 291
 292static efi_status_t gsmi_get_variable(efi_char16_t *name,
 293                                      efi_guid_t *vendor, u32 *attr,
 294                                      unsigned long *data_size,
 295                                      void *data)
 296{
 297        struct gsmi_nvram_var_param param = {
 298                .name_ptr = gsmi_dev.name_buf->address,
 299                .data_ptr = gsmi_dev.data_buf->address,
 300                .data_len = (u32)*data_size,
 301        };
 302        efi_status_t ret = EFI_SUCCESS;
 303        unsigned long flags;
 304        size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2);
 305        int rc;
 306
 307        if (name_len >= GSMI_BUF_SIZE / 2)
 308                return EFI_BAD_BUFFER_SIZE;
 309
 310        spin_lock_irqsave(&gsmi_dev.lock, flags);
 311
 312        /* Vendor guid */
 313        memcpy(&param.guid, vendor, sizeof(param.guid));
 314
 315        /* variable name, already in UTF-16 */
 316        memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
 317        memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
 318
 319        /* data pointer */
 320        memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
 321
 322        /* parameter buffer */
 323        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 324        memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
 325
 326        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NVRAM_VAR);
 327        if (rc < 0) {
 328                printk(KERN_ERR "gsmi: Get Variable failed\n");
 329                ret = EFI_LOAD_ERROR;
 330        } else if (rc == 1) {
 331                /* variable was not found */
 332                ret = EFI_NOT_FOUND;
 333        } else {
 334                /* Get the arguments back */
 335                memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
 336
 337                /* The size reported is the min of all of our buffers */
 338                *data_size = min_t(unsigned long, *data_size,
 339                                                gsmi_dev.data_buf->length);
 340                *data_size = min_t(unsigned long, *data_size, param.data_len);
 341
 342                /* Copy data back to return buffer. */
 343                memcpy(data, gsmi_dev.data_buf->start, *data_size);
 344
 345                /* All variables are have the following attributes */
 346                *attr = EFI_VARIABLE_NON_VOLATILE |
 347                        EFI_VARIABLE_BOOTSERVICE_ACCESS |
 348                        EFI_VARIABLE_RUNTIME_ACCESS;
 349        }
 350
 351        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 352
 353        return ret;
 354}
 355
 356static efi_status_t gsmi_get_next_variable(unsigned long *name_size,
 357                                           efi_char16_t *name,
 358                                           efi_guid_t *vendor)
 359{
 360        struct gsmi_get_next_var_param param = {
 361                .name_ptr = gsmi_dev.name_buf->address,
 362                .name_len = gsmi_dev.name_buf->length,
 363        };
 364        efi_status_t ret = EFI_SUCCESS;
 365        int rc;
 366        unsigned long flags;
 367
 368        /* For the moment, only support buffers that exactly match in size */
 369        if (*name_size != GSMI_BUF_SIZE)
 370                return EFI_BAD_BUFFER_SIZE;
 371
 372        /* Let's make sure the thing is at least null-terminated */
 373        if (ucs2_strnlen(name, GSMI_BUF_SIZE / 2) == GSMI_BUF_SIZE / 2)
 374                return EFI_INVALID_PARAMETER;
 375
 376        spin_lock_irqsave(&gsmi_dev.lock, flags);
 377
 378        /* guid */
 379        memcpy(&param.guid, vendor, sizeof(param.guid));
 380
 381        /* variable name, already in UTF-16 */
 382        memcpy(gsmi_dev.name_buf->start, name, *name_size);
 383
 384        /* parameter buffer */
 385        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 386        memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
 387
 388        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_GET_NEXT_VAR);
 389        if (rc < 0) {
 390                printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
 391                ret = EFI_LOAD_ERROR;
 392        } else if (rc == 1) {
 393                /* variable not found -- end of list */
 394                ret = EFI_NOT_FOUND;
 395        } else {
 396                /* copy variable data back to return buffer */
 397                memcpy(&param, gsmi_dev.param_buf->start, sizeof(param));
 398
 399                /* Copy the name back */
 400                memcpy(name, gsmi_dev.name_buf->start, GSMI_BUF_SIZE);
 401                *name_size = ucs2_strnlen(name, GSMI_BUF_SIZE / 2) * 2;
 402
 403                /* copy guid to return buffer */
 404                memcpy(vendor, &param.guid, sizeof(param.guid));
 405                ret = EFI_SUCCESS;
 406        }
 407
 408        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 409
 410        return ret;
 411}
 412
 413static efi_status_t gsmi_set_variable(efi_char16_t *name,
 414                                      efi_guid_t *vendor,
 415                                      u32 attr,
 416                                      unsigned long data_size,
 417                                      void *data)
 418{
 419        struct gsmi_nvram_var_param param = {
 420                .name_ptr = gsmi_dev.name_buf->address,
 421                .data_ptr = gsmi_dev.data_buf->address,
 422                .data_len = (u32)data_size,
 423                .attributes = EFI_VARIABLE_NON_VOLATILE |
 424                              EFI_VARIABLE_BOOTSERVICE_ACCESS |
 425                              EFI_VARIABLE_RUNTIME_ACCESS,
 426        };
 427        size_t name_len = ucs2_strnlen(name, GSMI_BUF_SIZE / 2);
 428        efi_status_t ret = EFI_SUCCESS;
 429        int rc;
 430        unsigned long flags;
 431
 432        if (name_len >= GSMI_BUF_SIZE / 2)
 433                return EFI_BAD_BUFFER_SIZE;
 434
 435        spin_lock_irqsave(&gsmi_dev.lock, flags);
 436
 437        /* guid */
 438        memcpy(&param.guid, vendor, sizeof(param.guid));
 439
 440        /* variable name, already in UTF-16 */
 441        memset(gsmi_dev.name_buf->start, 0, gsmi_dev.name_buf->length);
 442        memcpy(gsmi_dev.name_buf->start, name, name_len * 2);
 443
 444        /* data pointer */
 445        memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
 446        memcpy(gsmi_dev.data_buf->start, data, data_size);
 447
 448        /* parameter buffer */
 449        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 450        memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
 451
 452        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_NVRAM_VAR);
 453        if (rc < 0) {
 454                printk(KERN_ERR "gsmi: Set Variable failed\n");
 455                ret = EFI_INVALID_PARAMETER;
 456        }
 457
 458        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 459
 460        return ret;
 461}
 462
 463static const struct efivar_operations efivar_ops = {
 464        .get_variable = gsmi_get_variable,
 465        .set_variable = gsmi_set_variable,
 466        .get_next_variable = gsmi_get_next_variable,
 467};
 468
 469static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
 470                               struct bin_attribute *bin_attr,
 471                               char *buf, loff_t pos, size_t count)
 472{
 473        struct gsmi_set_eventlog_param param = {
 474                .data_ptr = gsmi_dev.data_buf->address,
 475        };
 476        int rc = 0;
 477        unsigned long flags;
 478
 479        /* Pull the type out */
 480        if (count < sizeof(u32))
 481                return -EINVAL;
 482        param.type = *(u32 *)buf;
 483        count -= sizeof(u32);
 484        buf += sizeof(u32);
 485
 486        /* The remaining buffer is the data payload */
 487        if (count > gsmi_dev.data_buf->length)
 488                return -EINVAL;
 489        param.data_len = count - sizeof(u32);
 490
 491        spin_lock_irqsave(&gsmi_dev.lock, flags);
 492
 493        /* data pointer */
 494        memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
 495        memcpy(gsmi_dev.data_buf->start, buf, param.data_len);
 496
 497        /* parameter buffer */
 498        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 499        memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
 500
 501        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
 502        if (rc < 0)
 503                printk(KERN_ERR "gsmi: Set Event Log failed\n");
 504
 505        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 506
 507        return rc;
 508
 509}
 510
 511static struct bin_attribute eventlog_bin_attr = {
 512        .attr = {.name = "append_to_eventlog", .mode = 0200},
 513        .write = eventlog_write,
 514};
 515
 516static ssize_t gsmi_clear_eventlog_store(struct kobject *kobj,
 517                                         struct kobj_attribute *attr,
 518                                         const char *buf, size_t count)
 519{
 520        int rc;
 521        unsigned long flags;
 522        unsigned long val;
 523        struct {
 524                u32 percentage;
 525                u32 data_type;
 526        } param;
 527
 528        rc = strict_strtoul(buf, 0, &val);
 529        if (rc)
 530                return rc;
 531
 532        /*
 533         * Value entered is a percentage, 0 through 100, anything else
 534         * is invalid.
 535         */
 536        if (val > 100)
 537                return -EINVAL;
 538
 539        /* data_type here selects the smbios event log. */
 540        param.percentage = val;
 541        param.data_type = 0;
 542
 543        spin_lock_irqsave(&gsmi_dev.lock, flags);
 544
 545        /* parameter buffer */
 546        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 547        memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
 548
 549        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_EVENT_LOG);
 550
 551        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 552
 553        if (rc)
 554                return rc;
 555        return count;
 556}
 557
 558static struct kobj_attribute gsmi_clear_eventlog_attr = {
 559        .attr = {.name = "clear_eventlog", .mode = 0200},
 560        .store = gsmi_clear_eventlog_store,
 561};
 562
 563static ssize_t gsmi_clear_config_store(struct kobject *kobj,
 564                                       struct kobj_attribute *attr,
 565                                       const char *buf, size_t count)
 566{
 567        int rc;
 568        unsigned long flags;
 569
 570        spin_lock_irqsave(&gsmi_dev.lock, flags);
 571
 572        /* clear parameter buffer */
 573        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 574
 575        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_CLEAR_CONFIG);
 576
 577        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 578
 579        if (rc)
 580                return rc;
 581        return count;
 582}
 583
 584static struct kobj_attribute gsmi_clear_config_attr = {
 585        .attr = {.name = "clear_config", .mode = 0200},
 586        .store = gsmi_clear_config_store,
 587};
 588
 589static const struct attribute *gsmi_attrs[] = {
 590        &gsmi_clear_config_attr.attr,
 591        &gsmi_clear_eventlog_attr.attr,
 592        NULL,
 593};
 594
 595static int gsmi_shutdown_reason(int reason)
 596{
 597        struct gsmi_log_entry_type_1 entry = {
 598                .type     = GSMI_LOG_ENTRY_TYPE_KERNEL,
 599                .instance = reason,
 600        };
 601        struct gsmi_set_eventlog_param param = {
 602                .data_len = sizeof(entry),
 603                .type     = 1,
 604        };
 605        static int saved_reason;
 606        int rc = 0;
 607        unsigned long flags;
 608
 609        /* avoid duplicate entries in the log */
 610        if (saved_reason & (1 << reason))
 611                return 0;
 612
 613        spin_lock_irqsave(&gsmi_dev.lock, flags);
 614
 615        saved_reason |= (1 << reason);
 616
 617        /* data pointer */
 618        memset(gsmi_dev.data_buf->start, 0, gsmi_dev.data_buf->length);
 619        memcpy(gsmi_dev.data_buf->start, &entry, sizeof(entry));
 620
 621        /* parameter buffer */
 622        param.data_ptr = gsmi_dev.data_buf->address;
 623        memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
 624        memcpy(gsmi_dev.param_buf->start, &param, sizeof(param));
 625
 626        rc = gsmi_exec(GSMI_CALLBACK, GSMI_CMD_SET_EVENT_LOG);
 627
 628        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 629
 630        if (rc < 0)
 631                printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
 632        else
 633                printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
 634                       reason);
 635
 636        return rc;
 637}
 638
 639static int gsmi_reboot_callback(struct notifier_block *nb,
 640                                unsigned long reason, void *arg)
 641{
 642        gsmi_shutdown_reason(GSMI_SHUTDOWN_CLEAN);
 643        return NOTIFY_DONE;
 644}
 645
 646static struct notifier_block gsmi_reboot_notifier = {
 647        .notifier_call = gsmi_reboot_callback
 648};
 649
 650static int gsmi_die_callback(struct notifier_block *nb,
 651                             unsigned long reason, void *arg)
 652{
 653        if (reason == DIE_OOPS)
 654                gsmi_shutdown_reason(GSMI_SHUTDOWN_OOPS);
 655        return NOTIFY_DONE;
 656}
 657
 658static struct notifier_block gsmi_die_notifier = {
 659        .notifier_call = gsmi_die_callback
 660};
 661
 662static int gsmi_panic_callback(struct notifier_block *nb,
 663                               unsigned long reason, void *arg)
 664{
 665        gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
 666        return NOTIFY_DONE;
 667}
 668
 669static struct notifier_block gsmi_panic_notifier = {
 670        .notifier_call = gsmi_panic_callback,
 671};
 672
 673/*
 674 * This hash function was blatantly copied from include/linux/hash.h.
 675 * It is used by this driver to obfuscate a board name that requires a
 676 * quirk within this driver.
 677 *
 678 * Please do not remove this copy of the function as any changes to the
 679 * global utility hash_64() function would break this driver's ability
 680 * to identify a board and provide the appropriate quirk -- mikew@google.com
 681 */
 682static u64 __init local_hash_64(u64 val, unsigned bits)
 683{
 684        u64 hash = val;
 685
 686        /*  Sigh, gcc can't optimise this alone like it does for 32 bits. */
 687        u64 n = hash;
 688        n <<= 18;
 689        hash -= n;
 690        n <<= 33;
 691        hash -= n;
 692        n <<= 3;
 693        hash += n;
 694        n <<= 3;
 695        hash -= n;
 696        n <<= 4;
 697        hash += n;
 698        n <<= 2;
 699        hash += n;
 700
 701        /* High bits are more random, so use them. */
 702        return hash >> (64 - bits);
 703}
 704
 705static u32 __init hash_oem_table_id(char s[8])
 706{
 707        u64 input;
 708        memcpy(&input, s, 8);
 709        return local_hash_64(input, 32);
 710}
 711
 712static struct dmi_system_id gsmi_dmi_table[] __initdata = {
 713        {
 714                .ident = "Google Board",
 715                .matches = {
 716                        DMI_MATCH(DMI_BOARD_VENDOR, "Google, Inc."),
 717                },
 718        },
 719        {}
 720};
 721MODULE_DEVICE_TABLE(dmi, gsmi_dmi_table);
 722
 723static __init int gsmi_system_valid(void)
 724{
 725        u32 hash;
 726
 727        if (!dmi_check_system(gsmi_dmi_table))
 728                return -ENODEV;
 729
 730        /*
 731         * Only newer firmware supports the gsmi interface.  All older
 732         * firmware that didn't support this interface used to plug the
 733         * table name in the first four bytes of the oem_table_id field.
 734         * Newer firmware doesn't do that though, so use that as the
 735         * discriminant factor.  We have to do this in order to
 736         * whitewash our board names out of the public driver.
 737         */
 738        if (!strncmp(acpi_gbl_FADT.header.oem_table_id, "FACP", 4)) {
 739                printk(KERN_INFO "gsmi: Board is too old\n");
 740                return -ENODEV;
 741        }
 742
 743        /* Disable on board with 1.0 BIOS due to Google bug 2602657 */
 744        hash = hash_oem_table_id(acpi_gbl_FADT.header.oem_table_id);
 745        if (hash == QUIRKY_BOARD_HASH) {
 746                const char *bios_ver = dmi_get_system_info(DMI_BIOS_VERSION);
 747                if (strncmp(bios_ver, "1.0", 3) == 0) {
 748                        pr_info("gsmi: disabled on this board's BIOS %s\n",
 749                                bios_ver);
 750                        return -ENODEV;
 751                }
 752        }
 753
 754        /* check for valid SMI command port in ACPI FADT */
 755        if (acpi_gbl_FADT.smi_command == 0) {
 756                pr_info("gsmi: missing smi_command\n");
 757                return -ENODEV;
 758        }
 759
 760        /* Found */
 761        return 0;
 762}
 763
 764static struct kobject *gsmi_kobj;
 765static struct efivars efivars;
 766
 767static __init int gsmi_init(void)
 768{
 769        unsigned long flags;
 770        int ret;
 771
 772        ret = gsmi_system_valid();
 773        if (ret)
 774                return ret;
 775
 776        gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
 777
 778        /* register device */
 779        gsmi_dev.pdev = platform_device_register_simple("gsmi", -1, NULL, 0);
 780        if (IS_ERR(gsmi_dev.pdev)) {
 781                printk(KERN_ERR "gsmi: unable to register platform device\n");
 782                return PTR_ERR(gsmi_dev.pdev);
 783        }
 784
 785        /* SMI access needs to be serialized */
 786        spin_lock_init(&gsmi_dev.lock);
 787
 788        /* SMI callbacks require 32bit addresses */
 789        gsmi_dev.pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 790        gsmi_dev.pdev->dev.dma_mask =
 791                &gsmi_dev.pdev->dev.coherent_dma_mask;
 792        ret = -ENOMEM;
 793        gsmi_dev.dma_pool = dma_pool_create("gsmi", &gsmi_dev.pdev->dev,
 794                                             GSMI_BUF_SIZE, GSMI_BUF_ALIGN, 0);
 795        if (!gsmi_dev.dma_pool)
 796                goto out_err;
 797
 798        /*
 799         * pre-allocate buffers because sometimes we are called when
 800         * this is not feasible: oops, panic, die, mce, etc
 801         */
 802        gsmi_dev.name_buf = gsmi_buf_alloc();
 803        if (!gsmi_dev.name_buf) {
 804                printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
 805                goto out_err;
 806        }
 807
 808        gsmi_dev.data_buf = gsmi_buf_alloc();
 809        if (!gsmi_dev.data_buf) {
 810                printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
 811                goto out_err;
 812        }
 813
 814        gsmi_dev.param_buf = gsmi_buf_alloc();
 815        if (!gsmi_dev.param_buf) {
 816                printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
 817                goto out_err;
 818        }
 819
 820        /*
 821         * Determine type of handshake used to serialize the SMI
 822         * entry. See also gsmi_exec().
 823         *
 824         * There's a "behavior" present on some chipsets where writing the
 825         * SMI trigger register in the southbridge doesn't result in an
 826         * immediate SMI. Rather, the processor can execute "a few" more
 827         * instructions before the SMI takes effect. To ensure synchronous
 828         * behavior, implement a handshake between the kernel driver and the
 829         * firmware handler to spin until released. This ioctl determines
 830         * the type of handshake.
 831         *
 832         * NONE: The firmware handler does not implement any
 833         * handshake. Either it doesn't need to, or it's legacy firmware
 834         * that doesn't know it needs to and never will.
 835         *
 836         * CF: The firmware handler will clear the CF in the saved
 837         * state before returning. The driver may set the CF and test for
 838         * it to clear before proceeding.
 839         *
 840         * SPIN: The firmware handler does not implement any handshake
 841         * but the driver should spin for a hundred or so microseconds
 842         * to ensure the SMI has triggered.
 843         *
 844         * Finally, the handler will return -ENOSYS if
 845         * GSMI_CMD_HANDSHAKE_TYPE is unimplemented, which implies
 846         * HANDSHAKE_NONE.
 847         */
 848        spin_lock_irqsave(&gsmi_dev.lock, flags);
 849        gsmi_dev.handshake_type = GSMI_HANDSHAKE_SPIN;
 850        gsmi_dev.handshake_type =
 851            gsmi_exec(GSMI_CALLBACK, GSMI_CMD_HANDSHAKE_TYPE);
 852        if (gsmi_dev.handshake_type == -ENOSYS)
 853                gsmi_dev.handshake_type = GSMI_HANDSHAKE_NONE;
 854        spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 855
 856        /* Remove and clean up gsmi if the handshake could not complete. */
 857        if (gsmi_dev.handshake_type == -ENXIO) {
 858                printk(KERN_INFO "gsmi version " DRIVER_VERSION
 859                       " failed to load\n");
 860                ret = -ENODEV;
 861                goto out_err;
 862        }
 863
 864        /* Register in the firmware directory */
 865        ret = -ENOMEM;
 866        gsmi_kobj = kobject_create_and_add("gsmi", firmware_kobj);
 867        if (!gsmi_kobj) {
 868                printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
 869                goto out_err;
 870        }
 871
 872        /* Setup eventlog access */
 873        ret = sysfs_create_bin_file(gsmi_kobj, &eventlog_bin_attr);
 874        if (ret) {
 875                printk(KERN_INFO "gsmi: Failed to setup eventlog");
 876                goto out_err;
 877        }
 878
 879        /* Other attributes */
 880        ret = sysfs_create_files(gsmi_kobj, gsmi_attrs);
 881        if (ret) {
 882                printk(KERN_INFO "gsmi: Failed to add attrs");
 883                goto out_remove_bin_file;
 884        }
 885
 886        ret = efivars_register(&efivars, &efivar_ops, gsmi_kobj);
 887        if (ret) {
 888                printk(KERN_INFO "gsmi: Failed to register efivars\n");
 889                goto out_remove_sysfs_files;
 890        }
 891
 892        ret = efivars_sysfs_init();
 893        if (ret) {
 894                printk(KERN_INFO "gsmi: Failed to create efivars files\n");
 895                efivars_unregister(&efivars);
 896                goto out_remove_sysfs_files;
 897        }
 898
 899        register_reboot_notifier(&gsmi_reboot_notifier);
 900        register_die_notifier(&gsmi_die_notifier);
 901        atomic_notifier_chain_register(&panic_notifier_list,
 902                                       &gsmi_panic_notifier);
 903
 904        printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
 905
 906        return 0;
 907
 908out_remove_sysfs_files:
 909        sysfs_remove_files(gsmi_kobj, gsmi_attrs);
 910out_remove_bin_file:
 911        sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
 912out_err:
 913        kobject_put(gsmi_kobj);
 914        gsmi_buf_free(gsmi_dev.param_buf);
 915        gsmi_buf_free(gsmi_dev.data_buf);
 916        gsmi_buf_free(gsmi_dev.name_buf);
 917        if (gsmi_dev.dma_pool)
 918                dma_pool_destroy(gsmi_dev.dma_pool);
 919        platform_device_unregister(gsmi_dev.pdev);
 920        pr_info("gsmi: failed to load: %d\n", ret);
 921        return ret;
 922}
 923
 924static void __exit gsmi_exit(void)
 925{
 926        unregister_reboot_notifier(&gsmi_reboot_notifier);
 927        unregister_die_notifier(&gsmi_die_notifier);
 928        atomic_notifier_chain_unregister(&panic_notifier_list,
 929                                         &gsmi_panic_notifier);
 930        efivars_unregister(&efivars);
 931
 932        sysfs_remove_files(gsmi_kobj, gsmi_attrs);
 933        sysfs_remove_bin_file(gsmi_kobj, &eventlog_bin_attr);
 934        kobject_put(gsmi_kobj);
 935        gsmi_buf_free(gsmi_dev.param_buf);
 936        gsmi_buf_free(gsmi_dev.data_buf);
 937        gsmi_buf_free(gsmi_dev.name_buf);
 938        dma_pool_destroy(gsmi_dev.dma_pool);
 939        platform_device_unregister(gsmi_dev.pdev);
 940}
 941
 942module_init(gsmi_init);
 943module_exit(gsmi_exit);
 944
 945MODULE_AUTHOR("Google, Inc.");
 946MODULE_LICENSE("GPL");
 947