LXR linux/drivers/media/rc/fintek-cir.h

   1/*
   2 * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
   3 *
   4 * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
   5 *
   6 * Special thanks to Fintek for providing hardware and spec sheets.
   7 * This driver is based upon the nuvoton, ite and ene drivers for
   8 * similar hardware.
   9 *
  10 * This program is free software; you can redistribute it and/or
  11 * modify it under the terms of the GNU General Public License as
  12 * published by the Free Software Foundation; either version 2 of the
  13 * License, or (at your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful, but
  16 * WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  18 * General Public License for more details.
  19 *
  20 * You should have received a copy of the GNU General Public License
  21 * along with this program; if not, write to the Free Software
  22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  23 * USA
  24 */
  25
  26#include <linux/spinlock.h>
  27#include <linux/ioctl.h>
  28
  29/* platform driver name to register */
  30#define FINTEK_DRIVER_NAME      "fintek-cir"
  31#define FINTEK_DESCRIPTION      "Fintek LPC SuperIO Consumer IR Transceiver"
  32#define VENDOR_ID_FINTEK        0x1934
  33
  34
  35/* debugging module parameter */
  36static int debug;
  37
  38#define fit_pr(level, text, ...) \
  39        printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
  40
  41#define fit_dbg(text, ...) \
  42        if (debug) \
  43                printk(KERN_DEBUG \
  44                        KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
  45
  46#define fit_dbg_verbose(text, ...) \
  47        if (debug > 1) \
  48                printk(KERN_DEBUG \
  49                        KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
  50
  51#define fit_dbg_wake(text, ...) \
  52        if (debug > 2) \
  53                printk(KERN_DEBUG \
  54                        KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
  55
  56
  57#define TX_BUF_LEN 256
  58#define RX_BUF_LEN 32
  59
  60struct fintek_dev {
  61        struct pnp_dev *pdev;
  62        struct rc_dev *rdev;
  63
  64        spinlock_t fintek_lock;
  65
  66        /* for rx */
  67        u8 buf[RX_BUF_LEN];
  68        unsigned int pkts;
  69
  70        struct {
  71                spinlock_t lock;
  72                u8 buf[TX_BUF_LEN];
  73                unsigned int buf_count;
  74                unsigned int cur_buf_num;
  75                wait_queue_head_t queue;
  76        } tx;
  77
  78        /* Config register index/data port pair */
  79        u8 cr_ip;
  80        u8 cr_dp;
  81
  82        /* hardware I/O settings */
  83        unsigned long cir_addr;
  84        int cir_irq;
  85        int cir_port_len;
  86
  87        /* hardware id */
  88        u8 chip_major;
  89        u8 chip_minor;
  90        u16 chip_vendor;
  91        u8 logical_dev_cir;
  92
  93        /* hardware features */
  94        bool hw_learning_capable;
  95        bool hw_tx_capable;
  96
  97        /* rx settings */
  98        bool learning_enabled;
  99        bool carrier_detect_enabled;
 100
 101        enum {
 102                CMD_HEADER = 0,
 103                SUBCMD,
 104                CMD_DATA,
 105                PARSE_IRDATA,
 106        } parser_state;
 107
 108        u8 cmd, rem;
 109
 110        /* carrier period = 1 / frequency */
 111        u32 carrier;
 112};
 113
 114/* buffer packet constants, largely identical to mceusb.c */
 115#define BUF_PULSE_BIT           0x80
 116#define BUF_LEN_MASK            0x1f
 117#define BUF_SAMPLE_MASK         0x7f
 118
 119#define BUF_COMMAND_HEADER      0x9f
 120#define BUF_COMMAND_MASK        0xe0
 121#define BUF_COMMAND_NULL        0x00
 122#define BUF_HW_CMD_HEADER       0xff
 123#define BUF_CMD_G_REVISION      0x0b
 124#define BUF_CMD_S_CARRIER       0x06
 125#define BUF_CMD_S_TIMEOUT       0x0c
 126#define BUF_CMD_SIG_END         0x01
 127#define BUF_CMD_S_TXMASK        0x08
 128#define BUF_CMD_S_RXSENSOR      0x14
 129#define BUF_RSP_PULSE_COUNT     0x15
 130
 131#define CIR_SAMPLE_PERIOD       50
 132
 133/*
 134 * Configuration Register:
 135 *  Index Port
 136 *  Data Port
 137 */
 138#define CR_INDEX_PORT           0x2e
 139#define CR_DATA_PORT            0x2f
 140
 141/* Possible alternate values, depends on how the chip is wired */
 142#define CR_INDEX_PORT2          0x4e
 143#define CR_DATA_PORT2           0x4f
 144
 145/*
 146 * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is
 147 * active. 1 = 0x4e, 0 = 0x2e
 148 */
 149#define PORT_SEL_PORT_4E_EN     0x10
 150
 151/* Extended Function Mode enable/disable magic values */
 152#define CONFIG_REG_ENABLE       0x87
 153#define CONFIG_REG_DISABLE      0xaa
 154
 155/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
 156#define CHIP_ID_HIGH_F71809U    0x04
 157#define CHIP_ID_LOW_F71809U     0x08
 158
 159/*
 160 * Global control regs we need to care about:
 161 *      Global Control                  def.
 162 *      Register name           addr    val. */
 163#define GCR_SOFTWARE_RESET      0x02 /* 0x00 */
 164#define GCR_LOGICAL_DEV_NO      0x07 /* 0x00 */
 165#define GCR_CHIP_ID_HI          0x20 /* 0x04 */
 166#define GCR_CHIP_ID_LO          0x21 /* 0x08 */
 167#define GCR_VENDOR_ID_HI        0x23 /* 0x19 */
 168#define GCR_VENDOR_ID_LO        0x24 /* 0x34 */
 169#define GCR_CONFIG_PORT_SEL     0x25 /* 0x01 */
 170#define GCR_KBMOUSE_WAKEUP      0x27
 171
 172#define LOGICAL_DEV_DISABLE     0x00
 173#define LOGICAL_DEV_ENABLE      0x01
 174
 175/* Logical device number of the CIR function */
 176#define LOGICAL_DEV_CIR_REV1    0x05
 177#define LOGICAL_DEV_CIR_REV2    0x08
 178
 179/* CIR Logical Device (LDN 0x08) config registers */
 180#define CIR_CR_COMMAND_INDEX    0x04
 181#define CIR_CR_IRCS             0x05 /* Before host writes command to IR, host
 182                                        must set to 1. When host finshes write
 183                                        command to IR, host must clear to 0. */
 184#define CIR_CR_COMMAND_DATA     0x06 /* Host read or write comand data */
 185#define CIR_CR_CLASS            0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx,
 186                                        0x33 = rx + 1 tx */
 187#define CIR_CR_DEV_EN           0x30 /* bit0 = 1 enables CIR */
 188#define CIR_CR_BASE_ADDR_HI     0x60 /* MSB of CIR IO base addr */
 189#define CIR_CR_BASE_ADDR_LO     0x61 /* LSB of CIR IO base addr */
 190#define CIR_CR_IRQ_SEL          0x70 /* bits3-0 store CIR IRQ */
 191#define CIR_CR_PSOUT_STATUS     0xf1
 192#define CIR_CR_WAKE_KEY3_ADDR   0xf8
 193#define CIR_CR_WAKE_KEY3_CODE   0xf9
 194#define CIR_CR_WAKE_KEY3_DC     0xfa
 195#define CIR_CR_WAKE_CONTROL     0xfb
 196#define CIR_CR_WAKE_KEY12_ADDR  0xfc
 197#define CIR_CR_WAKE_KEY4_ADDR   0xfd
 198#define CIR_CR_WAKE_KEY5_ADDR   0xfe
 199
 200#define CLASS_RX_ONLY           0xff
 201#define CLASS_RX_2TX            0x66
 202#define CLASS_RX_1TX            0x33
 203
 204/* CIR device registers */
 205#define CIR_STATUS              0x00
 206#define CIR_RX_DATA             0x01
 207#define CIR_TX_CONTROL          0x02
 208#define CIR_TX_DATA             0x03
 209#define CIR_CONTROL             0x04
 210
 211/* Bits to enable CIR wake */
 212#define LOGICAL_DEV_ACPI        0x01
 213#define LDEV_ACPI_WAKE_EN_REG   0xe8
 214#define ACPI_WAKE_EN_CIR_BIT    0x04
 215
 216#define LDEV_ACPI_PME_EN_REG    0xf0
 217#define LDEV_ACPI_PME_CLR_REG   0xf1
 218#define ACPI_PME_CIR_BIT        0x02
 219
 220#define LDEV_ACPI_STATE_REG     0xf4
 221#define ACPI_STATE_CIR_BIT      0x20
 222
 223/*
 224 * CIR status register (0x00):
 225 *   7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
 226 *   3 - TX_FINISH (1 when TX finished, write 1 to clear)
 227 *   2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear)
 228 *   1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear)
 229 *   0 - RX_RECEIVE (1 on RX receive, write 1 to clear)
 230 */
 231#define CIR_STATUS_IRQ_EN       0x80
 232#define CIR_STATUS_TX_FINISH    0x08
 233#define CIR_STATUS_TX_UNDERRUN  0x04
 234#define CIR_STATUS_RX_TIMEOUT   0x02
 235#define CIR_STATUS_RX_RECEIVE   0x01
 236#define CIR_STATUS_IRQ_MASK     0x0f
 237
 238/*
 239 * CIR TX control register (0x02):
 240 *   7 - TX_START (1 to indicate TX start, auto-cleared when done)
 241 *   6 - TX_END (1 to indicate TX data written to TX fifo)
 242 */
 243#define CIR_TX_CONTROL_TX_START 0x80
 244#define CIR_TX_CONTROL_TX_END   0x40
 245
 246