linux/drivers/mmc/host/s3cmci.c
<<
>>
Prefs
   1/*
   2 *  linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
   3 *
   4 *  Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
   5 *
   6 * Current driver maintained by Ben Dooks and Simtec Electronics
   7 *  Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2 as
  11 * published by the Free Software Foundation.
  12 */
  13
  14#include <linux/module.h>
  15#include <linux/dma-mapping.h>
  16#include <linux/clk.h>
  17#include <linux/mmc/host.h>
  18#include <linux/platform_device.h>
  19#include <linux/cpufreq.h>
  20#include <linux/debugfs.h>
  21#include <linux/seq_file.h>
  22#include <linux/gpio.h>
  23#include <linux/irq.h>
  24#include <linux/io.h>
  25
  26#include <mach/dma.h>
  27
  28#include <linux/platform_data/mmc-s3cmci.h>
  29
  30#include "s3cmci.h"
  31
  32#define DRIVER_NAME "s3c-mci"
  33
  34#define S3C2410_SDICON                  (0x00)
  35#define S3C2410_SDIPRE                  (0x04)
  36#define S3C2410_SDICMDARG               (0x08)
  37#define S3C2410_SDICMDCON               (0x0C)
  38#define S3C2410_SDICMDSTAT              (0x10)
  39#define S3C2410_SDIRSP0                 (0x14)
  40#define S3C2410_SDIRSP1                 (0x18)
  41#define S3C2410_SDIRSP2                 (0x1C)
  42#define S3C2410_SDIRSP3                 (0x20)
  43#define S3C2410_SDITIMER                (0x24)
  44#define S3C2410_SDIBSIZE                (0x28)
  45#define S3C2410_SDIDCON                 (0x2C)
  46#define S3C2410_SDIDCNT                 (0x30)
  47#define S3C2410_SDIDSTA                 (0x34)
  48#define S3C2410_SDIFSTA                 (0x38)
  49
  50#define S3C2410_SDIDATA                 (0x3C)
  51#define S3C2410_SDIIMSK                 (0x40)
  52
  53#define S3C2440_SDIDATA                 (0x40)
  54#define S3C2440_SDIIMSK                 (0x3C)
  55
  56#define S3C2440_SDICON_SDRESET          (1 << 8)
  57#define S3C2410_SDICON_SDIOIRQ          (1 << 3)
  58#define S3C2410_SDICON_FIFORESET        (1 << 1)
  59#define S3C2410_SDICON_CLOCKTYPE        (1 << 0)
  60
  61#define S3C2410_SDICMDCON_LONGRSP       (1 << 10)
  62#define S3C2410_SDICMDCON_WAITRSP       (1 << 9)
  63#define S3C2410_SDICMDCON_CMDSTART      (1 << 8)
  64#define S3C2410_SDICMDCON_SENDERHOST    (1 << 6)
  65#define S3C2410_SDICMDCON_INDEX         (0x3f)
  66
  67#define S3C2410_SDICMDSTAT_CRCFAIL      (1 << 12)
  68#define S3C2410_SDICMDSTAT_CMDSENT      (1 << 11)
  69#define S3C2410_SDICMDSTAT_CMDTIMEOUT   (1 << 10)
  70#define S3C2410_SDICMDSTAT_RSPFIN       (1 << 9)
  71
  72#define S3C2440_SDIDCON_DS_WORD         (2 << 22)
  73#define S3C2410_SDIDCON_TXAFTERRESP     (1 << 20)
  74#define S3C2410_SDIDCON_RXAFTERCMD      (1 << 19)
  75#define S3C2410_SDIDCON_BLOCKMODE       (1 << 17)
  76#define S3C2410_SDIDCON_WIDEBUS         (1 << 16)
  77#define S3C2410_SDIDCON_DMAEN           (1 << 15)
  78#define S3C2410_SDIDCON_STOP            (1 << 14)
  79#define S3C2440_SDIDCON_DATSTART        (1 << 14)
  80
  81#define S3C2410_SDIDCON_XFER_RXSTART    (2 << 12)
  82#define S3C2410_SDIDCON_XFER_TXSTART    (3 << 12)
  83
  84#define S3C2410_SDIDCON_BLKNUM_MASK     (0xFFF)
  85
  86#define S3C2410_SDIDSTA_SDIOIRQDETECT   (1 << 9)
  87#define S3C2410_SDIDSTA_FIFOFAIL        (1 << 8)
  88#define S3C2410_SDIDSTA_CRCFAIL         (1 << 7)
  89#define S3C2410_SDIDSTA_RXCRCFAIL       (1 << 6)
  90#define S3C2410_SDIDSTA_DATATIMEOUT     (1 << 5)
  91#define S3C2410_SDIDSTA_XFERFINISH      (1 << 4)
  92#define S3C2410_SDIDSTA_TXDATAON        (1 << 1)
  93#define S3C2410_SDIDSTA_RXDATAON        (1 << 0)
  94
  95#define S3C2440_SDIFSTA_FIFORESET       (1 << 16)
  96#define S3C2440_SDIFSTA_FIFOFAIL        (3 << 14)
  97#define S3C2410_SDIFSTA_TFDET           (1 << 13)
  98#define S3C2410_SDIFSTA_RFDET           (1 << 12)
  99#define S3C2410_SDIFSTA_COUNTMASK       (0x7f)
 100
 101#define S3C2410_SDIIMSK_RESPONSECRC     (1 << 17)
 102#define S3C2410_SDIIMSK_CMDSENT         (1 << 16)
 103#define S3C2410_SDIIMSK_CMDTIMEOUT      (1 << 15)
 104#define S3C2410_SDIIMSK_RESPONSEND      (1 << 14)
 105#define S3C2410_SDIIMSK_SDIOIRQ         (1 << 12)
 106#define S3C2410_SDIIMSK_FIFOFAIL        (1 << 11)
 107#define S3C2410_SDIIMSK_CRCSTATUS       (1 << 10)
 108#define S3C2410_SDIIMSK_DATACRC         (1 << 9)
 109#define S3C2410_SDIIMSK_DATATIMEOUT     (1 << 8)
 110#define S3C2410_SDIIMSK_DATAFINISH      (1 << 7)
 111#define S3C2410_SDIIMSK_TXFIFOHALF      (1 << 4)
 112#define S3C2410_SDIIMSK_RXFIFOLAST      (1 << 2)
 113#define S3C2410_SDIIMSK_RXFIFOHALF      (1 << 0)
 114
 115enum dbg_channels {
 116        dbg_err   = (1 << 0),
 117        dbg_debug = (1 << 1),
 118        dbg_info  = (1 << 2),
 119        dbg_irq   = (1 << 3),
 120        dbg_sg    = (1 << 4),
 121        dbg_dma   = (1 << 5),
 122        dbg_pio   = (1 << 6),
 123        dbg_fail  = (1 << 7),
 124        dbg_conf  = (1 << 8),
 125};
 126
 127static const int dbgmap_err   = dbg_fail;
 128static const int dbgmap_info  = dbg_info | dbg_conf;
 129static const int dbgmap_debug = dbg_err | dbg_debug;
 130
 131#define dbg(host, channels, args...)              \
 132        do {                                      \
 133        if (dbgmap_err & channels)                \
 134                dev_err(&host->pdev->dev, args);  \
 135        else if (dbgmap_info & channels)          \
 136                dev_info(&host->pdev->dev, args); \
 137        else if (dbgmap_debug & channels)         \
 138                dev_dbg(&host->pdev->dev, args);  \
 139        } while (0)
 140
 141static struct s3c2410_dma_client s3cmci_dma_client = {
 142        .name           = "s3c-mci",
 143};
 144
 145static void finalize_request(struct s3cmci_host *host);
 146static void s3cmci_send_request(struct mmc_host *mmc);
 147static void s3cmci_reset(struct s3cmci_host *host);
 148
 149#ifdef CONFIG_MMC_DEBUG
 150
 151static void dbg_dumpregs(struct s3cmci_host *host, char *prefix)
 152{
 153        u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize;
 154        u32 datcon, datcnt, datsta, fsta, imask;
 155
 156        con     = readl(host->base + S3C2410_SDICON);
 157        pre     = readl(host->base + S3C2410_SDIPRE);
 158        cmdarg  = readl(host->base + S3C2410_SDICMDARG);
 159        cmdcon  = readl(host->base + S3C2410_SDICMDCON);
 160        cmdsta  = readl(host->base + S3C2410_SDICMDSTAT);
 161        r0      = readl(host->base + S3C2410_SDIRSP0);
 162        r1      = readl(host->base + S3C2410_SDIRSP1);
 163        r2      = readl(host->base + S3C2410_SDIRSP2);
 164        r3      = readl(host->base + S3C2410_SDIRSP3);
 165        timer   = readl(host->base + S3C2410_SDITIMER);
 166        bsize   = readl(host->base + S3C2410_SDIBSIZE);
 167        datcon  = readl(host->base + S3C2410_SDIDCON);
 168        datcnt  = readl(host->base + S3C2410_SDIDCNT);
 169        datsta  = readl(host->base + S3C2410_SDIDSTA);
 170        fsta    = readl(host->base + S3C2410_SDIFSTA);
 171        imask   = readl(host->base + host->sdiimsk);
 172
 173        dbg(host, dbg_debug, "%s  CON:[%08x]  PRE:[%08x]  TMR:[%08x]\n",
 174                                prefix, con, pre, timer);
 175
 176        dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n",
 177                                prefix, cmdcon, cmdarg, cmdsta);
 178
 179        dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]"
 180                               " DSTA:[%08x] DCNT:[%08x]\n",
 181                                prefix, datcon, fsta, datsta, datcnt);
 182
 183        dbg(host, dbg_debug, "%s   R0:[%08x]   R1:[%08x]"
 184                               "   R2:[%08x]   R3:[%08x]\n",
 185                                prefix, r0, r1, r2, r3);
 186}
 187
 188static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
 189                           int stop)
 190{
 191        snprintf(host->dbgmsg_cmd, 300,
 192                 "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u",
 193                 host->ccnt, (stop ? " (STOP)" : ""),
 194                 cmd->opcode, cmd->arg, cmd->flags, cmd->retries);
 195
 196        if (cmd->data) {
 197                snprintf(host->dbgmsg_dat, 300,
 198                         "#%u bsize:%u blocks:%u bytes:%u",
 199                         host->dcnt, cmd->data->blksz,
 200                         cmd->data->blocks,
 201                         cmd->data->blocks * cmd->data->blksz);
 202        } else {
 203                host->dbgmsg_dat[0] = '\0';
 204        }
 205}
 206
 207static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd,
 208                        int fail)
 209{
 210        unsigned int dbglvl = fail ? dbg_fail : dbg_debug;
 211
 212        if (!cmd)
 213                return;
 214
 215        if (cmd->error == 0) {
 216                dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n",
 217                        host->dbgmsg_cmd, cmd->resp[0]);
 218        } else {
 219                dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n",
 220                        cmd->error, host->dbgmsg_cmd, host->status);
 221        }
 222
 223        if (!cmd->data)
 224                return;
 225
 226        if (cmd->data->error == 0) {
 227                dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat);
 228        } else {
 229                dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n",
 230                        cmd->data->error, host->dbgmsg_dat,
 231                        readl(host->base + S3C2410_SDIDCNT));
 232        }
 233}
 234#else
 235static void dbg_dumpcmd(struct s3cmci_host *host,
 236                        struct mmc_command *cmd, int fail) { }
 237
 238static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd,
 239                           int stop) { }
 240
 241static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { }
 242
 243#endif /* CONFIG_MMC_DEBUG */
 244
 245/**
 246 * s3cmci_host_usedma - return whether the host is using dma or pio
 247 * @host: The host state
 248 *
 249 * Return true if the host is using DMA to transfer data, else false
 250 * to use PIO mode. Will return static data depending on the driver
 251 * configuration.
 252 */
 253static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
 254{
 255#ifdef CONFIG_MMC_S3C_PIO
 256        return false;
 257#elif defined(CONFIG_MMC_S3C_DMA)
 258        return true;
 259#else
 260        return host->dodma;
 261#endif
 262}
 263
 264/**
 265 * s3cmci_host_canpio - return true if host has pio code available
 266 *
 267 * Return true if the driver has been compiled with the PIO support code
 268 * available.
 269 */
 270static inline bool s3cmci_host_canpio(void)
 271{
 272#ifdef CONFIG_MMC_S3C_PIO
 273        return true;
 274#else
 275        return false;
 276#endif
 277}
 278
 279static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
 280{
 281        u32 newmask;
 282
 283        newmask = readl(host->base + host->sdiimsk);
 284        newmask |= imask;
 285
 286        writel(newmask, host->base + host->sdiimsk);
 287
 288        return newmask;
 289}
 290
 291static inline u32 disable_imask(struct s3cmci_host *host, u32 imask)
 292{
 293        u32 newmask;
 294
 295        newmask = readl(host->base + host->sdiimsk);
 296        newmask &= ~imask;
 297
 298        writel(newmask, host->base + host->sdiimsk);
 299
 300        return newmask;
 301}
 302
 303static inline void clear_imask(struct s3cmci_host *host)
 304{
 305        u32 mask = readl(host->base + host->sdiimsk);
 306
 307        /* preserve the SDIO IRQ mask state */
 308        mask &= S3C2410_SDIIMSK_SDIOIRQ;
 309        writel(mask, host->base + host->sdiimsk);
 310}
 311
 312/**
 313 * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
 314 * @host: The host to check.
 315 *
 316 * Test to see if the SDIO interrupt is being signalled in case the
 317 * controller has failed to re-detect a card interrupt. Read GPE8 and
 318 * see if it is low and if so, signal a SDIO interrupt.
 319 *
 320 * This is currently called if a request is finished (we assume that the
 321 * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
 322 * already being indicated.
 323*/
 324static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
 325{
 326        if (host->sdio_irqen) {
 327                if (gpio_get_value(S3C2410_GPE(8)) == 0) {
 328                        pr_debug("%s: signalling irq\n", __func__);
 329                        mmc_signal_sdio_irq(host->mmc);
 330                }
 331        }
 332}
 333
 334static inline int get_data_buffer(struct s3cmci_host *host,
 335                                  u32 *bytes, u32 **pointer)
 336{
 337        struct scatterlist *sg;
 338
 339        if (host->pio_active == XFER_NONE)
 340                return -EINVAL;
 341
 342        if ((!host->mrq) || (!host->mrq->data))
 343                return -EINVAL;
 344
 345        if (host->pio_sgptr >= host->mrq->data->sg_len) {
 346                dbg(host, dbg_debug, "no more buffers (%i/%i)\n",
 347                      host->pio_sgptr, host->mrq->data->sg_len);
 348                return -EBUSY;
 349        }
 350        sg = &host->mrq->data->sg[host->pio_sgptr];
 351
 352        *bytes = sg->length;
 353        *pointer = sg_virt(sg);
 354
 355        host->pio_sgptr++;
 356
 357        dbg(host, dbg_sg, "new buffer (%i/%i)\n",
 358            host->pio_sgptr, host->mrq->data->sg_len);
 359
 360        return 0;
 361}
 362
 363static inline u32 fifo_count(struct s3cmci_host *host)
 364{
 365        u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
 366
 367        fifostat &= S3C2410_SDIFSTA_COUNTMASK;
 368        return fifostat;
 369}
 370
 371static inline u32 fifo_free(struct s3cmci_host *host)
 372{
 373        u32 fifostat = readl(host->base + S3C2410_SDIFSTA);
 374
 375        fifostat &= S3C2410_SDIFSTA_COUNTMASK;
 376        return 63 - fifostat;
 377}
 378
 379/**
 380 * s3cmci_enable_irq - enable IRQ, after having disabled it.
 381 * @host: The device state.
 382 * @more: True if more IRQs are expected from transfer.
 383 *
 384 * Enable the main IRQ if needed after it has been disabled.
 385 *
 386 * The IRQ can be one of the following states:
 387 *      - disabled during IDLE
 388 *      - disabled whilst processing data
 389 *      - enabled during transfer
 390 *      - enabled whilst awaiting SDIO interrupt detection
 391 */
 392static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
 393{
 394        unsigned long flags;
 395        bool enable = false;
 396
 397        local_irq_save(flags);
 398
 399        host->irq_enabled = more;
 400        host->irq_disabled = false;
 401
 402        enable = more | host->sdio_irqen;
 403
 404        if (host->irq_state != enable) {
 405                host->irq_state = enable;
 406
 407                if (enable)
 408                        enable_irq(host->irq);
 409                else
 410                        disable_irq(host->irq);
 411        }
 412
 413        local_irq_restore(flags);
 414}
 415
 416/**
 417 *
 418 */
 419static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
 420{
 421        unsigned long flags;
 422
 423        local_irq_save(flags);
 424
 425        /* pr_debug("%s: transfer %d\n", __func__, transfer); */
 426
 427        host->irq_disabled = transfer;
 428
 429        if (transfer && host->irq_state) {
 430                host->irq_state = false;
 431                disable_irq(host->irq);
 432        }
 433
 434        local_irq_restore(flags);
 435}
 436
 437static void do_pio_read(struct s3cmci_host *host)
 438{
 439        int res;
 440        u32 fifo;
 441        u32 *ptr;
 442        u32 fifo_words;
 443        void __iomem *from_ptr;
 444
 445        /* write real prescaler to host, it might be set slow to fix */
 446        writel(host->prescaler, host->base + S3C2410_SDIPRE);
 447
 448        from_ptr = host->base + host->sdidata;
 449
 450        while ((fifo = fifo_count(host))) {
 451                if (!host->pio_bytes) {
 452                        res = get_data_buffer(host, &host->pio_bytes,
 453                                              &host->pio_ptr);
 454                        if (res) {
 455                                host->pio_active = XFER_NONE;
 456                                host->complete_what = COMPLETION_FINALIZE;
 457
 458                                dbg(host, dbg_pio, "pio_read(): "
 459                                    "complete (no more data).\n");
 460                                return;
 461                        }
 462
 463                        dbg(host, dbg_pio,
 464                            "pio_read(): new target: [%i]@[%p]\n",
 465                            host->pio_bytes, host->pio_ptr);
 466                }
 467
 468                dbg(host, dbg_pio,
 469                    "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n",
 470                    fifo, host->pio_bytes,
 471                    readl(host->base + S3C2410_SDIDCNT));
 472
 473                /* If we have reached the end of the block, we can
 474                 * read a word and get 1 to 3 bytes.  If we in the
 475                 * middle of the block, we have to read full words,
 476                 * otherwise we will write garbage, so round down to
 477                 * an even multiple of 4. */
 478                if (fifo >= host->pio_bytes)
 479                        fifo = host->pio_bytes;
 480                else
 481                        fifo -= fifo & 3;
 482
 483                host->pio_bytes -= fifo;
 484                host->pio_count += fifo;
 485
 486                fifo_words = fifo >> 2;
 487                ptr = host->pio_ptr;
 488                while (fifo_words--)
 489                        *ptr++ = readl(from_ptr);
 490                host->pio_ptr = ptr;
 491
 492                if (fifo & 3) {
 493                        u32 n = fifo & 3;
 494                        u32 data = readl(from_ptr);
 495                        u8 *p = (u8 *)host->pio_ptr;
 496
 497                        while (n--) {
 498                                *p++ = data;
 499                                data >>= 8;
 500                        }
 501                }
 502        }
 503
 504        if (!host->pio_bytes) {
 505                res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr);
 506                if (res) {
 507                        dbg(host, dbg_pio,
 508                            "pio_read(): complete (no more buffers).\n");
 509                        host->pio_active = XFER_NONE;
 510                        host->complete_what = COMPLETION_FINALIZE;
 511
 512                        return;
 513                }
 514        }
 515
 516        enable_imask(host,
 517                     S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST);
 518}
 519
 520static void do_pio_write(struct s3cmci_host *host)
 521{
 522        void __iomem *to_ptr;
 523        int res;
 524        u32 fifo;
 525        u32 *ptr;
 526
 527        to_ptr = host->base + host->sdidata;
 528
 529        while ((fifo = fifo_free(host)) > 3) {
 530                if (!host->pio_bytes) {
 531                        res = get_data_buffer(host, &host->pio_bytes,
 532                                                        &host->pio_ptr);
 533                        if (res) {
 534                                dbg(host, dbg_pio,
 535                                    "pio_write(): complete (no more data).\n");
 536                                host->pio_active = XFER_NONE;
 537
 538                                return;
 539                        }
 540
 541                        dbg(host, dbg_pio,
 542                            "pio_write(): new source: [%i]@[%p]\n",
 543                            host->pio_bytes, host->pio_ptr);
 544
 545                }
 546
 547                /* If we have reached the end of the block, we have to
 548                 * write exactly the remaining number of bytes.  If we
 549                 * in the middle of the block, we have to write full
 550                 * words, so round down to an even multiple of 4. */
 551                if (fifo >= host->pio_bytes)
 552                        fifo = host->pio_bytes;
 553                else
 554                        fifo -= fifo & 3;
 555
 556                host->pio_bytes -= fifo;
 557                host->pio_count += fifo;
 558
 559                fifo = (fifo + 3) >> 2;
 560                ptr = host->pio_ptr;
 561                while (fifo--)
 562                        writel(*ptr++, to_ptr);
 563                host->pio_ptr = ptr;
 564        }
 565
 566        enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
 567}
 568
 569static void pio_tasklet(unsigned long data)
 570{
 571        struct s3cmci_host *host = (struct s3cmci_host *) data;
 572
 573        s3cmci_disable_irq(host, true);
 574
 575        if (host->pio_active == XFER_WRITE)
 576                do_pio_write(host);
 577
 578        if (host->pio_active == XFER_READ)
 579                do_pio_read(host);
 580
 581        if (host->complete_what == COMPLETION_FINALIZE) {
 582                clear_imask(host);
 583                if (host->pio_active != XFER_NONE) {
 584                        dbg(host, dbg_err, "unfinished %s "
 585                            "- pio_count:[%u] pio_bytes:[%u]\n",
 586                            (host->pio_active == XFER_READ) ? "read" : "write",
 587                            host->pio_count, host->pio_bytes);
 588
 589                        if (host->mrq->data)
 590                                host->mrq->data->error = -EINVAL;
 591                }
 592
 593                s3cmci_enable_irq(host, false);
 594                finalize_request(host);
 595        } else
 596                s3cmci_enable_irq(host, true);
 597}
 598
 599/*
 600 * ISR for SDI Interface IRQ
 601 * Communication between driver and ISR works as follows:
 602 *   host->mrq                  points to current request
 603 *   host->complete_what        Indicates when the request is considered done
 604 *     COMPLETION_CMDSENT         when the command was sent
 605 *     COMPLETION_RSPFIN          when a response was received
 606 *     COMPLETION_XFERFINISH      when the data transfer is finished
 607 *     COMPLETION_XFERFINISH_RSPFIN both of the above.
 608 *   host->complete_request     is the completion-object the driver waits for
 609 *
 610 * 1) Driver sets up host->mrq and host->complete_what
 611 * 2) Driver prepares the transfer
 612 * 3) Driver enables interrupts
 613 * 4) Driver starts transfer
 614 * 5) Driver waits for host->complete_rquest
 615 * 6) ISR checks for request status (errors and success)
 616 * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error
 617 * 7) ISR completes host->complete_request
 618 * 8) ISR disables interrupts
 619 * 9) Driver wakes up and takes care of the request
 620 *
 621 * Note: "->error"-fields are expected to be set to 0 before the request
 622 *       was issued by mmc.c - therefore they are only set, when an error
 623 *       contition comes up
 624 */
 625
 626static irqreturn_t s3cmci_irq(int irq, void *dev_id)
 627{
 628        struct s3cmci_host *host = dev_id;
 629        struct mmc_command *cmd;
 630        u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
 631        u32 mci_cclear = 0, mci_dclear;
 632        unsigned long iflags;
 633
 634        mci_dsta = readl(host->base + S3C2410_SDIDSTA);
 635        mci_imsk = readl(host->base + host->sdiimsk);
 636
 637        if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
 638                if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
 639                        mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
 640                        writel(mci_dclear, host->base + S3C2410_SDIDSTA);
 641
 642                        mmc_signal_sdio_irq(host->mmc);
 643                        return IRQ_HANDLED;
 644                }
 645        }
 646
 647        spin_lock_irqsave(&host->complete_lock, iflags);
 648
 649        mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
 650        mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
 651        mci_fsta = readl(host->base + S3C2410_SDIFSTA);
 652        mci_dclear = 0;
 653
 654        if ((host->complete_what == COMPLETION_NONE) ||
 655            (host->complete_what == COMPLETION_FINALIZE)) {
 656                host->status = "nothing to complete";
 657                clear_imask(host);
 658                goto irq_out;
 659        }
 660
 661        if (!host->mrq) {
 662                host->status = "no active mrq";
 663                clear_imask(host);
 664                goto irq_out;
 665        }
 666
 667        cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd;
 668
 669        if (!cmd) {
 670                host->status = "no active cmd";
 671                clear_imask(host);
 672                goto irq_out;
 673        }
 674
 675        if (!s3cmci_host_usedma(host)) {
 676                if ((host->pio_active == XFER_WRITE) &&
 677                    (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
 678
 679                        disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
 680                        tasklet_schedule(&host->pio_tasklet);
 681                        host->status = "pio tx";
 682                }
 683
 684                if ((host->pio_active == XFER_READ) &&
 685                    (mci_fsta & S3C2410_SDIFSTA_RFDET)) {
 686
 687                        disable_imask(host,
 688                                      S3C2410_SDIIMSK_RXFIFOHALF |
 689                                      S3C2410_SDIIMSK_RXFIFOLAST);
 690
 691                        tasklet_schedule(&host->pio_tasklet);
 692                        host->status = "pio rx";
 693                }
 694        }
 695
 696        if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
 697                dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n");
 698                cmd->error = -ETIMEDOUT;
 699                host->status = "error: command timeout";
 700                goto fail_transfer;
 701        }
 702
 703        if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) {
 704                if (host->complete_what == COMPLETION_CMDSENT) {
 705                        host->status = "ok: command sent";
 706                        goto close_transfer;
 707                }
 708
 709                mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT;
 710        }
 711
 712        if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) {
 713                if (cmd->flags & MMC_RSP_CRC) {
 714                        if (host->mrq->cmd->flags & MMC_RSP_136) {
 715                                dbg(host, dbg_irq,
 716                                    "fixup: ignore CRC fail with long rsp\n");
 717                        } else {
 718                                /* note, we used to fail the transfer
 719                                 * here, but it seems that this is just
 720                                 * the hardware getting it wrong.
 721                                 *
 722                                 * cmd->error = -EILSEQ;
 723                                 * host->status = "error: bad command crc";
 724                                 * goto fail_transfer;
 725                                */
 726                        }
 727                }
 728
 729                mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL;
 730        }
 731
 732        if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) {
 733                if (host->complete_what == COMPLETION_RSPFIN) {
 734                        host->status = "ok: command response received";
 735                        goto close_transfer;
 736                }
 737
 738                if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
 739                        host->complete_what = COMPLETION_XFERFINISH;
 740
 741                mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN;
 742        }
 743
 744        /* errors handled after this point are only relevant
 745           when a data transfer is in progress */
 746
 747        if (!cmd->data)
 748                goto clear_status_bits;
 749
 750        /* Check for FIFO failure */
 751        if (host->is2440) {
 752                if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) {
 753                        dbg(host, dbg_err, "FIFO failure\n");
 754                        host->mrq->data->error = -EILSEQ;
 755                        host->status = "error: 2440 fifo failure";
 756                        goto fail_transfer;
 757                }
 758        } else {
 759                if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) {
 760                        dbg(host, dbg_err, "FIFO failure\n");
 761                        cmd->data->error = -EILSEQ;
 762                        host->status = "error:  fifo failure";
 763                        goto fail_transfer;
 764                }
 765        }
 766
 767        if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) {
 768                dbg(host, dbg_err, "bad data crc (outgoing)\n");
 769                cmd->data->error = -EILSEQ;
 770                host->status = "error: bad data crc (outgoing)";
 771                goto fail_transfer;
 772        }
 773
 774        if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) {
 775                dbg(host, dbg_err, "bad data crc (incoming)\n");
 776                cmd->data->error = -EILSEQ;
 777                host->status = "error: bad data crc (incoming)";
 778                goto fail_transfer;
 779        }
 780
 781        if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) {
 782                dbg(host, dbg_err, "data timeout\n");
 783                cmd->data->error = -ETIMEDOUT;
 784                host->status = "error: data timeout";
 785                goto fail_transfer;
 786        }
 787
 788        if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) {
 789                if (host->complete_what == COMPLETION_XFERFINISH) {
 790                        host->status = "ok: data transfer completed";
 791                        goto close_transfer;
 792                }
 793
 794                if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN)
 795                        host->complete_what = COMPLETION_RSPFIN;
 796
 797                mci_dclear |= S3C2410_SDIDSTA_XFERFINISH;
 798        }
 799
 800clear_status_bits:
 801        writel(mci_cclear, host->base + S3C2410_SDICMDSTAT);
 802        writel(mci_dclear, host->base + S3C2410_SDIDSTA);
 803
 804        goto irq_out;
 805
 806fail_transfer:
 807        host->pio_active = XFER_NONE;
 808
 809close_transfer:
 810        host->complete_what = COMPLETION_FINALIZE;
 811
 812        clear_imask(host);
 813        tasklet_schedule(&host->pio_tasklet);
 814
 815        goto irq_out;
 816
 817irq_out:
 818        dbg(host, dbg_irq,
 819            "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n",
 820            mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status);
 821
 822        spin_unlock_irqrestore(&host->complete_lock, iflags);
 823        return IRQ_HANDLED;
 824
 825}
 826
 827/*
 828 * ISR for the CardDetect Pin
 829*/
 830
 831static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id)
 832{
 833        struct s3cmci_host *host = (struct s3cmci_host *)dev_id;
 834
 835        dbg(host, dbg_irq, "card detect\n");
 836
 837        mmc_detect_change(host->mmc, msecs_to_jiffies(500));
 838
 839        return IRQ_HANDLED;
 840}
 841
 842static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
 843                                     void *buf_id, int size,
 844                                     enum s3c2410_dma_buffresult result)
 845{
 846        struct s3cmci_host *host = buf_id;
 847        unsigned long iflags;
 848        u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt;
 849
 850        mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
 851        mci_dsta = readl(host->base + S3C2410_SDIDSTA);
 852        mci_fsta = readl(host->base + S3C2410_SDIFSTA);
 853        mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
 854
 855        BUG_ON(!host->mrq);
 856        BUG_ON(!host->mrq->data);
 857        BUG_ON(!host->dmatogo);
 858
 859        spin_lock_irqsave(&host->complete_lock, iflags);
 860
 861        if (result != S3C2410_RES_OK) {
 862                dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x "
 863                        "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n",
 864                        mci_csta, mci_dsta, mci_fsta,
 865                        mci_dcnt, result, host->dmatogo);
 866
 867                goto fail_request;
 868        }
 869
 870        host->dmatogo--;
 871        if (host->dmatogo) {
 872                dbg(host, dbg_dma, "DMA DONE  Size:%i DSTA:[%08x] "
 873                        "DCNT:[%08x] toGo:%u\n",
 874                        size, mci_dsta, mci_dcnt, host->dmatogo);
 875
 876                goto out;
 877        }
 878
 879        dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
 880                size, mci_dsta, mci_dcnt);
 881
 882        host->dma_complete = 1;
 883        host->complete_what = COMPLETION_FINALIZE;
 884
 885out:
 886        tasklet_schedule(&host->pio_tasklet);
 887        spin_unlock_irqrestore(&host->complete_lock, iflags);
 888        return;
 889
 890fail_request:
 891        host->mrq->data->error = -EINVAL;
 892        host->complete_what = COMPLETION_FINALIZE;
 893        clear_imask(host);
 894
 895        goto out;
 896}
 897
 898static void finalize_request(struct s3cmci_host *host)
 899{
 900        struct mmc_request *mrq = host->mrq;
 901        struct mmc_command *cmd;
 902        int debug_as_failure = 0;
 903
 904        if (host->complete_what != COMPLETION_FINALIZE)
 905                return;
 906
 907        if (!mrq)
 908                return;
 909        cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
 910
 911        if (cmd->data && (cmd->error == 0) &&
 912            (cmd->data->error == 0)) {
 913                if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
 914                        dbg(host, dbg_dma, "DMA Missing (%d)!\n",
 915                            host->dma_complete);
 916                        return;
 917                }
 918        }
 919
 920        /* Read response from controller. */
 921        cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0);
 922        cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1);
 923        cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2);
 924        cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3);
 925
 926        writel(host->prescaler, host->base + S3C2410_SDIPRE);
 927
 928        if (cmd->error)
 929                debug_as_failure = 1;
 930
 931        if (cmd->data && cmd->data->error)
 932                debug_as_failure = 1;
 933
 934        dbg_dumpcmd(host, cmd, debug_as_failure);
 935
 936        /* Cleanup controller */
 937        writel(0, host->base + S3C2410_SDICMDARG);
 938        writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
 939        writel(0, host->base + S3C2410_SDICMDCON);
 940        clear_imask(host);
 941
 942        if (cmd->data && cmd->error)
 943                cmd->data->error = cmd->error;
 944
 945        if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) {
 946                host->cmd_is_stop = 1;
 947                s3cmci_send_request(host->mmc);
 948                return;
 949        }
 950
 951        /* If we have no data transfer we are finished here */
 952        if (!mrq->data)
 953                goto request_done;
 954
 955        /* Calculate the amout of bytes transfer if there was no error */
 956        if (mrq->data->error == 0) {
 957                mrq->data->bytes_xfered =
 958                        (mrq->data->blocks * mrq->data->blksz);
 959        } else {
 960                mrq->data->bytes_xfered = 0;
 961        }
 962
 963        /* If we had an error while transferring data we flush the
 964         * DMA channel and the fifo to clear out any garbage. */
 965        if (mrq->data->error != 0) {
 966                if (s3cmci_host_usedma(host))
 967                        s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 968
 969                if (host->is2440) {
 970                        /* Clear failure register and reset fifo. */
 971                        writel(S3C2440_SDIFSTA_FIFORESET |
 972                               S3C2440_SDIFSTA_FIFOFAIL,
 973                               host->base + S3C2410_SDIFSTA);
 974                } else {
 975                        u32 mci_con;
 976
 977                        /* reset fifo */
 978                        mci_con = readl(host->base + S3C2410_SDICON);
 979                        mci_con |= S3C2410_SDICON_FIFORESET;
 980
 981                        writel(mci_con, host->base + S3C2410_SDICON);
 982                }
 983        }
 984
 985request_done:
 986        host->complete_what = COMPLETION_NONE;
 987        host->mrq = NULL;
 988
 989        s3cmci_check_sdio_irq(host);
 990        mmc_request_done(host->mmc, mrq);
 991}
 992
 993static void s3cmci_dma_setup(struct s3cmci_host *host,
 994                             enum dma_data_direction source)
 995{
 996        static enum dma_data_direction last_source = -1;
 997        static int setup_ok;
 998
 999        if (last_source == source)
1000                return;
1001
1002        last_source = source;
1003
1004        s3c2410_dma_devconfig(host->dma, source,
1005                              host->mem->start + host->sdidata);
1006
1007        if (!setup_ok) {
1008                s3c2410_dma_config(host->dma, 4);
1009                s3c2410_dma_set_buffdone_fn(host->dma,
1010                                            s3cmci_dma_done_callback);
1011                s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART);
1012                setup_ok = 1;
1013        }
1014}
1015
1016static void s3cmci_send_command(struct s3cmci_host *host,
1017                                        struct mmc_command *cmd)
1018{
1019        u32 ccon, imsk;
1020
1021        imsk  = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT |
1022                S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT |
1023                S3C2410_SDIIMSK_RESPONSECRC;
1024
1025        enable_imask(host, imsk);
1026
1027        if (cmd->data)
1028                host->complete_what = COMPLETION_XFERFINISH_RSPFIN;
1029        else if (cmd->flags & MMC_RSP_PRESENT)
1030                host->complete_what = COMPLETION_RSPFIN;
1031        else
1032                host->complete_what = COMPLETION_CMDSENT;
1033
1034        writel(cmd->arg, host->base + S3C2410_SDICMDARG);
1035
1036        ccon  = cmd->opcode & S3C2410_SDICMDCON_INDEX;
1037        ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART;
1038
1039        if (cmd->flags & MMC_RSP_PRESENT)
1040                ccon |= S3C2410_SDICMDCON_WAITRSP;
1041
1042        if (cmd->flags & MMC_RSP_136)
1043                ccon |= S3C2410_SDICMDCON_LONGRSP;
1044
1045        writel(ccon, host->base + S3C2410_SDICMDCON);
1046}
1047
1048static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
1049{
1050        u32 dcon, imsk, stoptries = 3;
1051
1052        /* write DCON register */
1053
1054        if (!data) {
1055                writel(0, host->base + S3C2410_SDIDCON);
1056                return 0;
1057        }
1058
1059        if ((data->blksz & 3) != 0) {
1060                /* We cannot deal with unaligned blocks with more than
1061                 * one block being transferred. */
1062
1063                if (data->blocks > 1) {
1064                        pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
1065                        return -EINVAL;
1066                }
1067        }
1068
1069        while (readl(host->base + S3C2410_SDIDSTA) &
1070               (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) {
1071
1072                dbg(host, dbg_err,
1073                    "mci_setup_data() transfer stillin progress.\n");
1074
1075                writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
1076                s3cmci_reset(host);
1077
1078                if ((stoptries--) == 0) {
1079                        dbg_dumpregs(host, "DRF");
1080                        return -EINVAL;
1081                }
1082        }
1083
1084        dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
1085
1086        if (s3cmci_host_usedma(host))
1087                dcon |= S3C2410_SDIDCON_DMAEN;
1088
1089        if (host->bus_width == MMC_BUS_WIDTH_4)
1090                dcon |= S3C2410_SDIDCON_WIDEBUS;
1091
1092        if (!(data->flags & MMC_DATA_STREAM))
1093                dcon |= S3C2410_SDIDCON_BLOCKMODE;
1094
1095        if (data->flags & MMC_DATA_WRITE) {
1096                dcon |= S3C2410_SDIDCON_TXAFTERRESP;
1097                dcon |= S3C2410_SDIDCON_XFER_TXSTART;
1098        }
1099
1100        if (data->flags & MMC_DATA_READ) {
1101                dcon |= S3C2410_SDIDCON_RXAFTERCMD;
1102                dcon |= S3C2410_SDIDCON_XFER_RXSTART;
1103        }
1104
1105        if (host->is2440) {
1106                dcon |= S3C2440_SDIDCON_DS_WORD;
1107                dcon |= S3C2440_SDIDCON_DATSTART;
1108        }
1109
1110        writel(dcon, host->base + S3C2410_SDIDCON);
1111
1112        /* write BSIZE register */
1113
1114        writel(data->blksz, host->base + S3C2410_SDIBSIZE);
1115
1116        /* add to IMASK register */
1117        imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC |
1118               S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH;
1119
1120        enable_imask(host, imsk);
1121
1122        /* write TIMER register */
1123
1124        if (host->is2440) {
1125                writel(0x007FFFFF, host->base + S3C2410_SDITIMER);
1126        } else {
1127                writel(0x0000FFFF, host->base + S3C2410_SDITIMER);
1128
1129                /* FIX: set slow clock to prevent timeouts on read */
1130                if (data->flags & MMC_DATA_READ)
1131                        writel(0xFF, host->base + S3C2410_SDIPRE);
1132        }
1133
1134        return 0;
1135}
1136
1137#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
1138
1139static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data)
1140{
1141        int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
1142
1143        BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1144
1145        host->pio_sgptr = 0;
1146        host->pio_bytes = 0;
1147        host->pio_count = 0;
1148        host->pio_active = rw ? XFER_WRITE : XFER_READ;
1149
1150        if (rw) {
1151                do_pio_write(host);
1152                enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF);
1153        } else {
1154                enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF
1155                             | S3C2410_SDIIMSK_RXFIFOLAST);
1156        }
1157
1158        return 0;
1159}
1160
1161static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
1162{
1163        int dma_len, i;
1164        int rw = data->flags & MMC_DATA_WRITE;
1165
1166        BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
1167
1168        s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1169        s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
1170
1171        dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
1172                             rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
1173
1174        if (dma_len == 0)
1175                return -ENOMEM;
1176
1177        host->dma_complete = 0;
1178        host->dmatogo = dma_len;
1179
1180        for (i = 0; i < dma_len; i++) {
1181                int res;
1182
1183                dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i,
1184                    sg_dma_address(&data->sg[i]),
1185                    sg_dma_len(&data->sg[i]));
1186
1187                res = s3c2410_dma_enqueue(host->dma, host,
1188                                          sg_dma_address(&data->sg[i]),
1189                                          sg_dma_len(&data->sg[i]));
1190
1191                if (res) {
1192                        s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
1193                        return -EBUSY;
1194                }
1195        }
1196
1197        s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START);
1198
1199        return 0;
1200}
1201
1202static void s3cmci_send_request(struct mmc_host *mmc)
1203{
1204        struct s3cmci_host *host = mmc_priv(mmc);
1205        struct mmc_request *mrq = host->mrq;
1206        struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd;
1207
1208        host->ccnt++;
1209        prepare_dbgmsg(host, cmd, host->cmd_is_stop);
1210
1211        /* Clear command, data and fifo status registers
1212           Fifo clear only necessary on 2440, but doesn't hurt on 2410
1213        */
1214        writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT);
1215        writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA);
1216        writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA);
1217
1218        if (cmd->data) {
1219                int res = s3cmci_setup_data(host, cmd->data);
1220
1221                host->dcnt++;
1222
1223                if (res) {
1224                        dbg(host, dbg_err, "setup data error %d\n", res);
1225                        cmd->error = res;
1226                        cmd->data->error = res;
1227
1228                        mmc_request_done(mmc, mrq);
1229                        return;
1230                }
1231
1232                if (s3cmci_host_usedma(host))
1233                        res = s3cmci_prepare_dma(host, cmd->data);
1234                else
1235                        res = s3cmci_prepare_pio(host, cmd->data);
1236
1237                if (res) {
1238                        dbg(host, dbg_err, "data prepare error %d\n", res);
1239                        cmd->error = res;
1240                        cmd->data->error = res;
1241
1242                        mmc_request_done(mmc, mrq);
1243                        return;
1244                }
1245        }
1246
1247        /* Send command */
1248        s3cmci_send_command(host, cmd);
1249
1250        /* Enable Interrupt */
1251        s3cmci_enable_irq(host, true);
1252}
1253
1254static int s3cmci_card_present(struct mmc_host *mmc)
1255{
1256        struct s3cmci_host *host = mmc_priv(mmc);
1257        struct s3c24xx_mci_pdata *pdata = host->pdata;
1258        int ret;
1259
1260        if (pdata->no_detect)
1261                return -ENOSYS;
1262
1263        ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
1264        return ret ^ pdata->detect_invert;
1265}
1266
1267static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
1268{
1269        struct s3cmci_host *host = mmc_priv(mmc);
1270
1271        host->status = "mmc request";
1272        host->cmd_is_stop = 0;
1273        host->mrq = mrq;
1274
1275        if (s3cmci_card_present(mmc) == 0) {
1276                dbg(host, dbg_err, "%s: no medium present\n", __func__);
1277                host->mrq->cmd->error = -ENOMEDIUM;
1278                mmc_request_done(mmc, mrq);
1279        } else
1280                s3cmci_send_request(mmc);
1281}
1282
1283static void s3cmci_set_clk(struct s3cmci_host *host, struct mmc_ios *ios)
1284{
1285        u32 mci_psc;
1286
1287        /* Set clock */
1288        for (mci_psc = 0; mci_psc < 255; mci_psc++) {
1289                host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1));
1290
1291                if (host->real_rate <= ios->clock)
1292                        break;
1293        }
1294
1295        if (mci_psc > 255)
1296                mci_psc = 255;
1297
1298        host->prescaler = mci_psc;
1299        writel(host->prescaler, host->base + S3C2410_SDIPRE);
1300
1301        /* If requested clock is 0, real_rate will be 0, too */
1302        if (ios->clock == 0)
1303                host->real_rate = 0;
1304}
1305
1306static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
1307{
1308        struct s3cmci_host *host = mmc_priv(mmc);
1309        u32 mci_con;
1310
1311        /* Set the power state */
1312
1313        mci_con = readl(host->base + S3C2410_SDICON);
1314
1315        switch (ios->power_mode) {
1316        case MMC_POWER_ON:
1317        case MMC_POWER_UP:
1318                /* Configure GPE5...GPE10 pins in SD mode */
1319                s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
1320                                      S3C_GPIO_PULL_NONE);
1321
1322                if (host->pdata->set_power)
1323                        host->pdata->set_power(ios->power_mode, ios->vdd);
1324
1325                if (!host->is2440)
1326                        mci_con |= S3C2410_SDICON_FIFORESET;
1327
1328                break;
1329
1330        case MMC_POWER_OFF:
1331        default:
1332                gpio_direction_output(S3C2410_GPE(5), 0);
1333
1334                if (host->is2440)
1335                        mci_con |= S3C2440_SDICON_SDRESET;
1336
1337                if (host->pdata->set_power)
1338                        host->pdata->set_power(ios->power_mode, ios->vdd);
1339
1340                break;
1341        }
1342
1343        s3cmci_set_clk(host, ios);
1344
1345        /* Set CLOCK_ENABLE */
1346        if (ios->clock)
1347                mci_con |= S3C2410_SDICON_CLOCKTYPE;
1348        else
1349                mci_con &= ~S3C2410_SDICON_CLOCKTYPE;
1350
1351        writel(mci_con, host->base + S3C2410_SDICON);
1352
1353        if ((ios->power_mode == MMC_POWER_ON) ||
1354            (ios->power_mode == MMC_POWER_UP)) {
1355                dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n",
1356                        host->real_rate/1000, ios->clock/1000);
1357        } else {
1358                dbg(host, dbg_conf, "powered down.\n");
1359        }
1360
1361        host->bus_width = ios->bus_width;
1362}
1363
1364static void s3cmci_reset(struct s3cmci_host *host)
1365{
1366        u32 con = readl(host->base + S3C2410_SDICON);
1367
1368        con |= S3C2440_SDICON_SDRESET;
1369        writel(con, host->base + S3C2410_SDICON);
1370}
1371
1372static int s3cmci_get_ro(struct mmc_host *mmc)
1373{
1374        struct s3cmci_host *host = mmc_priv(mmc);
1375        struct s3c24xx_mci_pdata *pdata = host->pdata;
1376        int ret;
1377
1378        if (pdata->no_wprotect)
1379                return 0;
1380
1381        ret = gpio_get_value(pdata->gpio_wprotect) ? 1 : 0;
1382        ret ^= pdata->wprotect_invert;
1383
1384        return ret;
1385}
1386
1387static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
1388{
1389        struct s3cmci_host *host = mmc_priv(mmc);
1390        unsigned long flags;
1391        u32 con;
1392
1393        local_irq_save(flags);
1394
1395        con = readl(host->base + S3C2410_SDICON);
1396        host->sdio_irqen = enable;
1397
1398        if (enable == host->sdio_irqen)
1399                goto same_state;
1400
1401        if (enable) {
1402                con |= S3C2410_SDICON_SDIOIRQ;
1403                enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1404
1405                if (!host->irq_state && !host->irq_disabled) {
1406                        host->irq_state = true;
1407                        enable_irq(host->irq);
1408                }
1409        } else {
1410                disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
1411                con &= ~S3C2410_SDICON_SDIOIRQ;
1412
1413                if (!host->irq_enabled && host->irq_state) {
1414                        disable_irq_nosync(host->irq);
1415                        host->irq_state = false;
1416                }
1417        }
1418
1419        writel(con, host->base + S3C2410_SDICON);
1420
1421 same_state:
1422        local_irq_restore(flags);
1423
1424        s3cmci_check_sdio_irq(host);
1425}
1426
1427static struct mmc_host_ops s3cmci_ops = {
1428        .request        = s3cmci_request,
1429        .set_ios        = s3cmci_set_ios,
1430        .get_ro         = s3cmci_get_ro,
1431        .get_cd         = s3cmci_card_present,
1432        .enable_sdio_irq = s3cmci_enable_sdio_irq,
1433};
1434
1435static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
1436        /* This is currently here to avoid a number of if (host->pdata)
1437         * checks. Any zero fields to ensure reasonable defaults are picked. */
1438         .no_wprotect = 1,
1439         .no_detect = 1,
1440};
1441
1442#ifdef CONFIG_CPU_FREQ
1443
1444static int s3cmci_cpufreq_transition(struct notifier_block *nb,
1445                                     unsigned long val, void *data)
1446{
1447        struct s3cmci_host *host;
1448        struct mmc_host *mmc;
1449        unsigned long newclk;
1450        unsigned long flags;
1451
1452        host = container_of(nb, struct s3cmci_host, freq_transition);
1453        newclk = clk_get_rate(host->clk);
1454        mmc = host->mmc;
1455
1456        if ((val == CPUFREQ_PRECHANGE && newclk > host->clk_rate) ||
1457            (val == CPUFREQ_POSTCHANGE && newclk < host->clk_rate)) {
1458                spin_lock_irqsave(&mmc->lock, flags);
1459
1460                host->clk_rate = newclk;
1461
1462                if (mmc->ios.power_mode != MMC_POWER_OFF &&
1463                    mmc->ios.clock != 0)
1464                        s3cmci_set_clk(host, &mmc->ios);
1465
1466                spin_unlock_irqrestore(&mmc->lock, flags);
1467        }
1468
1469        return 0;
1470}
1471
1472static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1473{
1474        host->freq_transition.notifier_call = s3cmci_cpufreq_transition;
1475
1476        return cpufreq_register_notifier(&host->freq_transition,
1477                                         CPUFREQ_TRANSITION_NOTIFIER);
1478}
1479
1480static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1481{
1482        cpufreq_unregister_notifier(&host->freq_transition,
1483                                    CPUFREQ_TRANSITION_NOTIFIER);
1484}
1485
1486#else
1487static inline int s3cmci_cpufreq_register(struct s3cmci_host *host)
1488{
1489        return 0;
1490}
1491
1492static inline void s3cmci_cpufreq_deregister(struct s3cmci_host *host)
1493{
1494}
1495#endif
1496
1497
1498#ifdef CONFIG_DEBUG_FS
1499
1500static int s3cmci_state_show(struct seq_file *seq, void *v)
1501{
1502        struct s3cmci_host *host = seq->private;
1503
1504        seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
1505        seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
1506        seq_printf(seq, "Prescale = %d\n", host->prescaler);
1507        seq_printf(seq, "is2440 = %d\n", host->is2440);
1508        seq_printf(seq, "IRQ = %d\n", host->irq);
1509        seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
1510        seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
1511        seq_printf(seq, "IRQ state = %d\n", host->irq_state);
1512        seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
1513        seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
1514        seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
1515        seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
1516
1517        return 0;
1518}
1519
1520static int s3cmci_state_open(struct inode *inode, struct file *file)
1521{
1522        return single_open(file, s3cmci_state_show, inode->i_private);
1523}
1524
1525static const struct file_operations s3cmci_fops_state = {
1526        .owner          = THIS_MODULE,
1527        .open           = s3cmci_state_open,
1528        .read           = seq_read,
1529        .llseek         = seq_lseek,
1530        .release        = single_release,
1531};
1532
1533#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
1534
1535struct s3cmci_reg {
1536        unsigned short  addr;
1537        unsigned char   *name;
1538} debug_regs[] = {
1539        DBG_REG(CON),
1540        DBG_REG(PRE),
1541        DBG_REG(CMDARG),
1542        DBG_REG(CMDCON),
1543        DBG_REG(CMDSTAT),
1544        DBG_REG(RSP0),
1545        DBG_REG(RSP1),
1546        DBG_REG(RSP2),
1547        DBG_REG(RSP3),
1548        DBG_REG(TIMER),
1549        DBG_REG(BSIZE),
1550        DBG_REG(DCON),
1551        DBG_REG(DCNT),
1552        DBG_REG(DSTA),
1553        DBG_REG(FSTA),
1554        {}
1555};
1556
1557static int s3cmci_regs_show(struct seq_file *seq, void *v)
1558{
1559        struct s3cmci_host *host = seq->private;
1560        struct s3cmci_reg *rptr = debug_regs;
1561
1562        for (; rptr->name; rptr++)
1563                seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
1564                           readl(host->base + rptr->addr));
1565
1566        seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
1567
1568        return 0;
1569}
1570
1571static int s3cmci_regs_open(struct inode *inode, struct file *file)
1572{
1573        return single_open(file, s3cmci_regs_show, inode->i_private);
1574}
1575
1576static const struct file_operations s3cmci_fops_regs = {
1577        .owner          = THIS_MODULE,
1578        .open           = s3cmci_regs_open,
1579        .read           = seq_read,
1580        .llseek         = seq_lseek,
1581        .release        = single_release,
1582};
1583
1584static void s3cmci_debugfs_attach(struct s3cmci_host *host)
1585{
1586        struct device *dev = &host->pdev->dev;
1587
1588        host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
1589        if (IS_ERR(host->debug_root)) {
1590                dev_err(dev, "failed to create debugfs root\n");
1591                return;
1592        }
1593
1594        host->debug_state = debugfs_create_file("state", 0444,
1595                                                host->debug_root, host,
1596                                                &s3cmci_fops_state);
1597
1598        if (IS_ERR(host->debug_state))
1599                dev_err(dev, "failed to create debug state file\n");
1600
1601        host->debug_regs = debugfs_create_file("regs", 0444,
1602                                               host->debug_root, host,
1603                                               &s3cmci_fops_regs);
1604
1605        if (IS_ERR(host->debug_regs))
1606                dev_err(dev, "failed to create debug regs file\n");
1607}
1608
1609static void s3cmci_debugfs_remove(struct s3cmci_host *host)
1610{
1611        debugfs_remove(host->debug_regs);
1612        debugfs_remove(host->debug_state);
1613        debugfs_remove(host->debug_root);
1614}
1615
1616#else
1617static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
1618static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
1619
1620#endif /* CONFIG_DEBUG_FS */
1621
1622static int s3cmci_probe(struct platform_device *pdev)
1623{
1624        struct s3cmci_host *host;
1625        struct mmc_host *mmc;
1626        int ret;
1627        int is2440;
1628        int i;
1629
1630        is2440 = platform_get_device_id(pdev)->driver_data;
1631
1632        mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
1633        if (!mmc) {
1634                ret = -ENOMEM;
1635                goto probe_out;
1636        }
1637
1638        for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
1639                ret = gpio_request(i, dev_name(&pdev->dev));
1640                if (ret) {
1641                        dev_err(&pdev->dev, "failed to get gpio %d\n", i);
1642
1643                        for (i--; i >= S3C2410_GPE(5); i--)
1644                                gpio_free(i);
1645
1646                        goto probe_free_host;
1647                }
1648        }
1649
1650        host = mmc_priv(mmc);
1651        host->mmc       = mmc;
1652        host->pdev      = pdev;
1653        host->is2440    = is2440;
1654
1655        host->pdata = pdev->dev.platform_data;
1656        if (!host->pdata) {
1657                pdev->dev.platform_data = &s3cmci_def_pdata;
1658                host->pdata = &s3cmci_def_pdata;
1659        }
1660
1661        spin_lock_init(&host->complete_lock);
1662        tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
1663
1664        if (is2440) {
1665                host->sdiimsk   = S3C2440_SDIIMSK;
1666                host->sdidata   = S3C2440_SDIDATA;
1667                host->clk_div   = 1;
1668        } else {
1669                host->sdiimsk   = S3C2410_SDIIMSK;
1670                host->sdidata   = S3C2410_SDIDATA;
1671                host->clk_div   = 2;
1672        }
1673
1674        host->complete_what     = COMPLETION_NONE;
1675        host->pio_active        = XFER_NONE;
1676
1677#ifdef CONFIG_MMC_S3C_PIODMA
1678        host->dodma             = host->pdata->use_dma;
1679#endif
1680
1681        host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1682        if (!host->mem) {
1683                dev_err(&pdev->dev,
1684                        "failed to get io memory region resource.\n");
1685
1686                ret = -ENOENT;
1687                goto probe_free_gpio;
1688        }
1689
1690        host->mem = request_mem_region(host->mem->start,
1691                                       resource_size(host->mem), pdev->name);
1692
1693        if (!host->mem) {
1694                dev_err(&pdev->dev, "failed to request io memory region.\n");
1695                ret = -ENOENT;
1696                goto probe_free_gpio;
1697        }
1698
1699        host->base = ioremap(host->mem->start, resource_size(host->mem));
1700        if (!host->base) {
1701                dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
1702                ret = -EINVAL;
1703                goto probe_free_mem_region;
1704        }
1705
1706        host->irq = platform_get_irq(pdev, 0);
1707        if (host->irq == 0) {
1708                dev_err(&pdev->dev, "failed to get interrupt resource.\n");
1709                ret = -EINVAL;
1710                goto probe_iounmap;
1711        }
1712
1713        if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) {
1714                dev_err(&pdev->dev, "failed to request mci interrupt.\n");
1715                ret = -ENOENT;
1716                goto probe_iounmap;
1717        }
1718
1719        /* We get spurious interrupts even when we have set the IMSK
1720         * register to ignore everything, so use disable_irq() to make
1721         * ensure we don't lock the system with un-serviceable requests. */
1722
1723        disable_irq(host->irq);
1724        host->irq_state = false;
1725
1726        if (!host->pdata->no_detect) {
1727                ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
1728                if (ret) {
1729                        dev_err(&pdev->dev, "failed to get detect gpio\n");
1730                        goto probe_free_irq;
1731                }
1732
1733                host->irq_cd = gpio_to_irq(host->pdata->gpio_detect);
1734
1735                if (host->irq_cd >= 0) {
1736                        if (request_irq(host->irq_cd, s3cmci_irq_cd,
1737                                        IRQF_TRIGGER_RISING |
1738                                        IRQF_TRIGGER_FALLING,
1739                                        DRIVER_NAME, host)) {
1740                                dev_err(&pdev->dev,
1741                                        "can't get card detect irq.\n");
1742                                ret = -ENOENT;
1743                                goto probe_free_gpio_cd;
1744                        }
1745                } else {
1746                        dev_warn(&pdev->dev,
1747                                 "host detect has no irq available\n");
1748                        gpio_direction_input(host->pdata->gpio_detect);
1749                }
1750        } else
1751                host->irq_cd = -1;
1752
1753        if (!host->pdata->no_wprotect) {
1754                ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
1755                if (ret) {
1756                        dev_err(&pdev->dev, "failed to get writeprotect\n");
1757                        goto probe_free_irq_cd;
1758                }
1759
1760                gpio_direction_input(host->pdata->gpio_wprotect);
1761        }
1762
1763        /* depending on the dma state, get a dma channel to use. */
1764
1765        if (s3cmci_host_usedma(host)) {
1766                host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client,
1767                                                host);
1768                if (host->dma < 0) {
1769                        dev_err(&pdev->dev, "cannot get DMA channel.\n");
1770                        if (!s3cmci_host_canpio()) {
1771                                ret = -EBUSY;
1772                                goto probe_free_gpio_wp;
1773                        } else {
1774                                dev_warn(&pdev->dev, "falling back to PIO.\n");
1775                                host->dodma = 0;
1776                        }
1777                }
1778        }
1779
1780        host->clk = clk_get(&pdev->dev, "sdi");
1781        if (IS_ERR(host->clk)) {
1782                dev_err(&pdev->dev, "failed to find clock source.\n");
1783                ret = PTR_ERR(host->clk);
1784                host->clk = NULL;
1785                goto probe_free_dma;
1786        }
1787
1788        ret = clk_enable(host->clk);
1789        if (ret) {
1790                dev_err(&pdev->dev, "failed to enable clock source.\n");
1791                goto clk_free;
1792        }
1793
1794        host->clk_rate = clk_get_rate(host->clk);
1795
1796        mmc->ops        = &s3cmci_ops;
1797        mmc->ocr_avail  = MMC_VDD_32_33 | MMC_VDD_33_34;
1798#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
1799        mmc->caps       = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
1800#else
1801        mmc->caps       = MMC_CAP_4_BIT_DATA;
1802#endif
1803        mmc->f_min      = host->clk_rate / (host->clk_div * 256);
1804        mmc->f_max      = host->clk_rate / host->clk_div;
1805
1806        if (host->pdata->ocr_avail)
1807                mmc->ocr_avail = host->pdata->ocr_avail;
1808
1809        mmc->max_blk_count      = 4095;
1810        mmc->max_blk_size       = 4095;
1811        mmc->max_req_size       = 4095 * 512;
1812        mmc->max_seg_size       = mmc->max_req_size;
1813
1814        mmc->max_segs           = 128;
1815
1816        dbg(host, dbg_debug,
1817            "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n",
1818            (host->is2440?"2440":""),
1819            host->base, host->irq, host->irq_cd, host->dma);
1820
1821        ret = s3cmci_cpufreq_register(host);
1822        if (ret) {
1823                dev_err(&pdev->dev, "failed to register cpufreq\n");
1824                goto free_dmabuf;
1825        }
1826
1827        ret = mmc_add_host(mmc);
1828        if (ret) {
1829                dev_err(&pdev->dev, "failed to add mmc host.\n");
1830                goto free_cpufreq;
1831        }
1832
1833        s3cmci_debugfs_attach(host);
1834
1835        platform_set_drvdata(pdev, mmc);
1836        dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
1837                 s3cmci_host_usedma(host) ? "dma" : "pio",
1838                 mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
1839
1840        return 0;
1841
1842 free_cpufreq:
1843        s3cmci_cpufreq_deregister(host);
1844
1845 free_dmabuf:
1846        clk_disable(host->clk);
1847
1848 clk_free:
1849        clk_put(host->clk);
1850
1851 probe_free_dma:
1852        if (s3cmci_host_usedma(host))
1853                s3c2410_dma_free(host->dma, &s3cmci_dma_client);
1854
1855 probe_free_gpio_wp:
1856        if (!host->pdata->no_wprotect)
1857                gpio_free(host->pdata->gpio_wprotect);
1858
1859 probe_free_gpio_cd:
1860        if (!host->pdata->no_detect)
1861                gpio_free(host->pdata->gpio_detect);
1862
1863 probe_free_irq_cd:
1864        if (host->irq_cd >= 0)
1865                free_irq(host->irq_cd, host);
1866
1867 probe_free_irq:
1868        free_irq(host->irq, host);
1869
1870 probe_iounmap:
1871        iounmap(host->base);
1872
1873 probe_free_mem_region:
1874        release_mem_region(host->mem->start, resource_size(host->mem));
1875
1876 probe_free_gpio:
1877        for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1878                gpio_free(i);
1879
1880 probe_free_host:
1881        mmc_free_host(mmc);
1882
1883 probe_out:
1884        return ret;
1885}
1886
1887static void s3cmci_shutdown(struct platform_device *pdev)
1888{
1889        struct mmc_host *mmc = platform_get_drvdata(pdev);
1890        struct s3cmci_host *host = mmc_priv(mmc);
1891
1892        if (host->irq_cd >= 0)
1893                free_irq(host->irq_cd, host);
1894
1895        s3cmci_debugfs_remove(host);
1896        s3cmci_cpufreq_deregister(host);
1897        mmc_remove_host(mmc);
1898        clk_disable(host->clk);
1899}
1900
1901static int s3cmci_remove(struct platform_device *pdev)
1902{
1903        struct mmc_host         *mmc  = platform_get_drvdata(pdev);
1904        struct s3cmci_host      *host = mmc_priv(mmc);
1905        struct s3c24xx_mci_pdata *pd = host->pdata;
1906        int i;
1907
1908        s3cmci_shutdown(pdev);
1909
1910        clk_put(host->clk);
1911
1912        tasklet_disable(&host->pio_tasklet);
1913
1914        if (s3cmci_host_usedma(host))
1915                s3c2410_dma_free(host->dma, &s3cmci_dma_client);
1916
1917        free_irq(host->irq, host);
1918
1919        if (!pd->no_wprotect)
1920                gpio_free(pd->gpio_wprotect);
1921
1922        if (!pd->no_detect)
1923                gpio_free(pd->gpio_detect);
1924
1925        for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
1926                gpio_free(i);
1927
1928
1929        iounmap(host->base);
1930        release_mem_region(host->mem->start, resource_size(host->mem));
1931
1932        mmc_free_host(mmc);
1933        return 0;
1934}
1935
1936static struct platform_device_id s3cmci_driver_ids[] = {
1937        {
1938                .name   = "s3c2410-sdi",
1939                .driver_data    = 0,
1940        }, {
1941                .name   = "s3c2412-sdi",
1942                .driver_data    = 1,
1943        }, {
1944                .name   = "s3c2440-sdi",
1945                .driver_data    = 1,
1946        },
1947        { }
1948};
1949
1950MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
1951
1952
1953#ifdef CONFIG_PM
1954
1955static int s3cmci_suspend(struct device *dev)
1956{
1957        struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
1958
1959        return mmc_suspend_host(mmc);
1960}
1961
1962static int s3cmci_resume(struct device *dev)
1963{
1964        struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
1965
1966        return mmc_resume_host(mmc);
1967}
1968
1969static const struct dev_pm_ops s3cmci_pm = {
1970        .suspend        = s3cmci_suspend,
1971        .resume         = s3cmci_resume,
1972};
1973
1974#define s3cmci_pm_ops &s3cmci_pm
1975#else /* CONFIG_PM */
1976#define s3cmci_pm_ops NULL
1977#endif /* CONFIG_PM */
1978
1979
1980static struct platform_driver s3cmci_driver = {
1981        .driver = {
1982                .name   = "s3c-sdi",
1983                .owner  = THIS_MODULE,
1984                .pm     = s3cmci_pm_ops,
1985        },
1986        .id_table       = s3cmci_driver_ids,
1987        .probe          = s3cmci_probe,
1988        .remove         = s3cmci_remove,
1989        .shutdown       = s3cmci_shutdown,
1990};
1991
1992module_platform_driver(s3cmci_driver);
1993
1994MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
1995MODULE_LICENSE("GPL v2");
1996MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
1997