LXR linux/drivers/net/ethernet/8390/mcf8390.c

   1/*
   2 *  Support for ColdFire CPU based boards using a NS8390 Ethernet device.
   3 *
   4 *  Derived from the many other 8390 drivers.
   5 *
   6 *  (C) Copyright 2012,  Greg Ungerer <gerg@uclinux.org>
   7 *
   8 *  This file is subject to the terms and conditions of the GNU General Public
   9 *  License.  See the file COPYING in the main directory of the Linux
  10 *  distribution for more details.
  11 */
  12
  13#include <linux/module.h>
  14#include <linux/kernel.h>
  15#include <linux/errno.h>
  16#include <linux/init.h>
  17#include <linux/platform_device.h>
  18#include <linux/netdevice.h>
  19#include <linux/etherdevice.h>
  20#include <linux/jiffies.h>
  21#include <linux/io.h>
  22#include <asm/mcf8390.h>
  23
  24static const char version[] =
  25        "mcf8390.c: (15-06-2012) Greg Ungerer <gerg@uclinux.org>";
  26
  27#define NE_CMD          0x00
  28#define NE_DATAPORT     0x10    /* NatSemi-defined port window offset */
  29#define NE_RESET        0x1f    /* Issue a read to reset ,a write to clear */
  30#define NE_EN0_ISR      0x07
  31#define NE_EN0_DCFG     0x0e
  32#define NE_EN0_RSARLO   0x08
  33#define NE_EN0_RSARHI   0x09
  34#define NE_EN0_RCNTLO   0x0a
  35#define NE_EN0_RXCR     0x0c
  36#define NE_EN0_TXCR     0x0d
  37#define NE_EN0_RCNTHI   0x0b
  38#define NE_EN0_IMR      0x0f
  39
  40#define NESM_START_PG   0x40    /* First page of TX buffer */
  41#define NESM_STOP_PG    0x80    /* Last page +1 of RX ring */
  42
  43#ifdef NE2000_ODDOFFSET
  44/*
  45 * A lot of the ColdFire boards use a separate address region for odd offset
  46 * register addresses. The following functions convert and map as required.
  47 * Note that the data port accesses are treated a little differently, and
  48 * always accessed via the insX/outsX functions.
  49 */
  50static inline u32 NE_PTR(u32 addr)
  51{
  52        if (addr & 1)
  53                return addr - 1 + NE2000_ODDOFFSET;
  54        return addr;
  55}
  56
  57static inline u32 NE_DATA_PTR(u32 addr)
  58{
  59        return addr;
  60}
  61
  62void ei_outb(u32 val, u32 addr)
  63{
  64        NE2000_BYTE *rp;
  65
  66        rp = (NE2000_BYTE *) NE_PTR(addr);
  67        *rp = RSWAP(val);
  68}
  69
  70#define ei_inb  ei_inb
  71u8 ei_inb(u32 addr)
  72{
  73        NE2000_BYTE *rp, val;
  74
  75        rp = (NE2000_BYTE *) NE_PTR(addr);
  76        val = *rp;
  77        return (u8) (RSWAP(val) & 0xff);
  78}
  79
  80void ei_insb(u32 addr, void *vbuf, int len)
  81{
  82        NE2000_BYTE *rp, val;
  83        u8 *buf;
  84
  85        buf = (u8 *) vbuf;
  86        rp = (NE2000_BYTE *) NE_DATA_PTR(addr);
  87        for (; (len > 0); len--) {
  88                val = *rp;
  89                *buf++ = RSWAP(val);
  90        }
  91}
  92
  93void ei_insw(u32 addr, void *vbuf, int len)
  94{
  95        volatile u16 *rp;
  96        u16 w, *buf;
  97
  98        buf = (u16 *) vbuf;
  99        rp = (volatile u16 *) NE_DATA_PTR(addr);
 100        for (; (len > 0); len--) {
 101                w = *rp;
 102                *buf++ = BSWAP(w);
 103        }
 104}
 105
 106void ei_outsb(u32 addr, const void *vbuf, int len)
 107{
 108        NE2000_BYTE *rp, val;
 109        u8 *buf;
 110
 111        buf = (u8 *) vbuf;
 112        rp = (NE2000_BYTE *) NE_DATA_PTR(addr);
 113        for (; (len > 0); len--) {
 114                val = *buf++;
 115                *rp = RSWAP(val);
 116        }
 117}
 118
 119void ei_outsw(u32 addr, const void *vbuf, int len)
 120{
 121        volatile u16 *rp;
 122        u16 w, *buf;
 123
 124        buf = (u16 *) vbuf;
 125        rp = (volatile u16 *) NE_DATA_PTR(addr);
 126        for (; (len > 0); len--) {
 127                w = *buf++;
 128                *rp = BSWAP(w);
 129        }
 130}
 131
 132#else /* !NE2000_ODDOFFSET */
 133
 134#define ei_inb          inb
 135#define ei_outb         outb
 136#define ei_insb         insb
 137#define ei_insw         insw
 138#define ei_outsb        outsb
 139#define ei_outsw        outsw
 140
 141#endif /* !NE2000_ODDOFFSET */
 142
 143#define ei_inb_p        ei_inb
 144#define ei_outb_p       ei_outb
 145
 146#include "lib8390.c"
 147
 148/*
 149 * Hard reset the card. This used to pause for the same period that a
 150 * 8390 reset command required, but that shouldn't be necessary.
 151 */
 152static void mcf8390_reset_8390(struct net_device *dev)
 153{
 154        unsigned long reset_start_time = jiffies;
 155        u32 addr = dev->base_addr;
 156
 157        if (ei_debug > 1)
 158                netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies);
 159
 160        ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
 161
 162        ei_status.txing = 0;
 163        ei_status.dmaing = 0;
 164
 165        /* This check _should_not_ be necessary, omit eventually. */
 166        while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RESET) == 0) {
 167                if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) {
 168                        netdev_warn(dev, "%s: did not complete\n", __func__);
 169                        break;
 170                }
 171        }
 172
 173        ei_outb(ENISR_RESET, addr + NE_EN0_ISR);
 174}
 175
 176/*
 177 * This *shouldn't* happen.
 178 * If it does, it's the last thing you'll see
 179 */
 180static void mcf8390_dmaing_err(const char *func, struct net_device *dev,
 181                               struct ei_device *ei_local)
 182{
 183        netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
 184                func, ei_local->dmaing, ei_local->irqlock);
 185}
 186
 187/*
 188 * Grab the 8390 specific header. Similar to the block_input routine, but
 189 * we don't need to be concerned with ring wrap as the header will be at
 190 * the start of a page, so we optimize accordingly.
 191 */
 192static void mcf8390_get_8390_hdr(struct net_device *dev,
 193                                 struct e8390_pkt_hdr *hdr, int ring_page)
 194{
 195        struct ei_device *ei_local = netdev_priv(dev);
 196        u32 addr = dev->base_addr;
 197
 198        if (ei_local->dmaing) {
 199                mcf8390_dmaing_err(__func__, dev, ei_local);
 200                return;
 201        }
 202
 203        ei_local->dmaing |= 0x01;
 204        ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD);
 205        ei_outb(ENISR_RDC, addr + NE_EN0_ISR);
 206        ei_outb(sizeof(struct e8390_pkt_hdr), addr + NE_EN0_RCNTLO);
 207        ei_outb(0, addr + NE_EN0_RCNTHI);
 208        ei_outb(0, addr + NE_EN0_RSARLO);               /* On page boundary */
 209        ei_outb(ring_page, addr + NE_EN0_RSARHI);
 210        ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD);
 211
 212        ei_insw(addr + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr) >> 1);
 213
 214        outb(ENISR_RDC, addr + NE_EN0_ISR);     /* Ack intr */
 215        ei_local->dmaing &= ~0x01;
 216
 217        hdr->count = cpu_to_le16(hdr->count);
 218}
 219
 220/*
 221 * Block input and output, similar to the Crynwr packet driver.
 222 * If you are porting to a new ethercard, look at the packet driver source
 223 * for hints. The NEx000 doesn't share the on-board packet memory --
 224 * you have to put the packet out through the "remote DMA" dataport
 225 * using z_writeb.
 226 */
 227static void mcf8390_block_input(struct net_device *dev, int count,
 228                                struct sk_buff *skb, int ring_offset)
 229{
 230        struct ei_device *ei_local = netdev_priv(dev);
 231        u32 addr = dev->base_addr;
 232        char *buf = skb->data;
 233
 234        if (ei_local->dmaing) {
 235                mcf8390_dmaing_err(__func__, dev, ei_local);
 236                return;
 237        }
 238
 239        ei_local->dmaing |= 0x01;
 240        ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD);
 241        ei_outb(ENISR_RDC, addr + NE_EN0_ISR);
 242        ei_outb(count & 0xff, addr + NE_EN0_RCNTLO);
 243        ei_outb(count >> 8, addr + NE_EN0_RCNTHI);
 244        ei_outb(ring_offset & 0xff, addr + NE_EN0_RSARLO);
 245        ei_outb(ring_offset >> 8, addr + NE_EN0_RSARHI);
 246        ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD);
 247
 248        ei_insw(addr + NE_DATAPORT, buf, count >> 1);
 249        if (count & 1)
 250                buf[count - 1] = ei_inb(addr + NE_DATAPORT);
 251
 252        ei_outb(ENISR_RDC, addr + NE_EN0_ISR);  /* Ack intr */
 253        ei_local->dmaing &= ~0x01;
 254}
 255
 256static void mcf8390_block_output(struct net_device *dev, int count,
 257                                 const unsigned char *buf,
 258                                 const int start_page)
 259{
 260        struct ei_device *ei_local = netdev_priv(dev);
 261        u32 addr = dev->base_addr;
 262        unsigned long dma_start;
 263
 264        /* Make sure we transfer all bytes if 16bit IO writes */
 265        if (count & 0x1)
 266                count++;
 267
 268        if (ei_local->dmaing) {
 269                mcf8390_dmaing_err(__func__, dev, ei_local);
 270                return;
 271        }
 272
 273        ei_local->dmaing |= 0x01;
 274        /* We should already be in page 0, but to be safe... */
 275        ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, addr + NE_CMD);
 276
 277        ei_outb(ENISR_RDC, addr + NE_EN0_ISR);
 278
 279        /* Now the normal output. */
 280        ei_outb(count & 0xff, addr + NE_EN0_RCNTLO);
 281        ei_outb(count >> 8, addr + NE_EN0_RCNTHI);
 282        ei_outb(0x00, addr + NE_EN0_RSARLO);
 283        ei_outb(start_page, addr + NE_EN0_RSARHI);
 284        ei_outb(E8390_RWRITE + E8390_START, addr + NE_CMD);
 285
 286        ei_outsw(addr + NE_DATAPORT, buf, count >> 1);
 287
 288        dma_start = jiffies;
 289        while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) {
 290                if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */
 291                        netdev_err(dev, "timeout waiting for Tx RDC\n");
 292                        mcf8390_reset_8390(dev);
 293                        __NS8390_init(dev, 1);
 294                        break;
 295                }
 296        }
 297
 298        ei_outb(ENISR_RDC, addr + NE_EN0_ISR);  /* Ack intr */
 299        ei_local->dmaing &= ~0x01;
 300}
 301
 302static const struct net_device_ops mcf8390_netdev_ops = {
 303        .ndo_open               = __ei_open,
 304        .ndo_stop               = __ei_close,
 305        .ndo_start_xmit         = __ei_start_xmit,
 306        .ndo_tx_timeout         = __ei_tx_timeout,
 307        .ndo_get_stats          = __ei_get_stats,
 308        .ndo_set_rx_mode        = __ei_set_multicast_list,
 309        .ndo_validate_addr      = eth_validate_addr,
 310        .ndo_set_mac_address    = eth_mac_addr,
 311        .ndo_change_mtu         = eth_change_mtu,
 312#ifdef CONFIG_NET_POLL_CONTROLLER
 313        .ndo_poll_controller    = __ei_poll,
 314#endif
 315};
 316
 317static int mcf8390_init(struct net_device *dev)
 318{
 319        static u32 offsets[] = {
 320                0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 321                0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
 322        };
 323        struct ei_device *ei_local = netdev_priv(dev);
 324        unsigned char SA_prom[32];
 325        u32 addr = dev->base_addr;
 326        int start_page, stop_page;
 327        int i, ret;
 328
 329        mcf8390_reset_8390(dev);
 330
 331        /*
 332         * Read the 16 bytes of station address PROM.
 333         * We must first initialize registers,
 334         * similar to NS8390_init(eifdev, 0).
 335         * We can't reliably read the SAPROM address without this.
 336         * (I learned the hard way!).
 337         */
 338        {
 339                static const struct {
 340                        u32 value;
 341                        u32 offset;
 342                } program_seq[] = {
 343                        {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD},
 344                                                /* Select page 0 */
 345                        {0x48,  NE_EN0_DCFG},   /* 0x48: Set byte-wide access */
 346                        {0x00,  NE_EN0_RCNTLO}, /* Clear the count regs */
 347                        {0x00,  NE_EN0_RCNTHI},
 348                        {0x00,  NE_EN0_IMR},    /* Mask completion irq */
 349                        {0xFF,  NE_EN0_ISR},
 350                        {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
 351                        {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */
 352                        {32,    NE_EN0_RCNTLO},
 353                        {0x00,  NE_EN0_RCNTHI},
 354                        {0x00,  NE_EN0_RSARLO}, /* DMA starting at 0x0000 */
 355                        {0x00,  NE_EN0_RSARHI},
 356                        {E8390_RREAD + E8390_START, NE_CMD},
 357                };
 358                for (i = 0; i < ARRAY_SIZE(program_seq); i++) {
 359                        ei_outb(program_seq[i].value,
 360                                 addr + program_seq[i].offset);
 361                }
 362        }
 363
 364        for (i = 0; i < 16; i++) {
 365                SA_prom[i] = ei_inb(addr + NE_DATAPORT);
 366                ei_inb(addr + NE_DATAPORT);
 367        }
 368
 369        /* We must set the 8390 for word mode. */
 370        ei_outb(0x49, addr + NE_EN0_DCFG);
 371        start_page = NESM_START_PG;
 372        stop_page = NESM_STOP_PG;
 373
 374        /* Install the Interrupt handler */
 375        ret = request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev);
 376        if (ret)
 377                return ret;
 378
 379        for (i = 0; i < ETH_ALEN; i++)
 380                dev->dev_addr[i] = SA_prom[i];
 381
 382        netdev_dbg(dev, "Found ethernet address: %pM\n", dev->dev_addr);
 383
 384        ei_local->name = "mcf8390";
 385        ei_local->tx_start_page = start_page;
 386        ei_local->stop_page = stop_page;
 387        ei_local->word16 = 1;
 388        ei_local->rx_start_page = start_page + TX_PAGES;
 389        ei_local->reset_8390 = mcf8390_reset_8390;
 390        ei_local->block_input = mcf8390_block_input;
 391        ei_local->block_output = mcf8390_block_output;
 392        ei_local->get_8390_hdr = mcf8390_get_8390_hdr;
 393        ei_local->reg_offset = offsets;
 394
 395        dev->netdev_ops = &mcf8390_netdev_ops;
 396        __NS8390_init(dev, 0);
 397        ret = register_netdev(dev);
 398        if (ret) {
 399                free_irq(dev->irq, dev);
 400                return ret;
 401        }
 402
 403        netdev_info(dev, "addr=0x%08x irq=%d, Ethernet Address %pM\n",
 404                addr, dev->irq, dev->dev_addr);
 405        return 0;
 406}
 407
 408static int mcf8390_probe(struct platform_device *pdev)
 409{
 410        struct net_device *dev;
 411        struct ei_device *ei_local;
 412        struct resource *mem, *irq;
 413        resource_size_t msize;
 414        int ret;
 415
 416        irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 417        if (irq == NULL) {
 418                dev_err(&pdev->dev, "no IRQ specified?\n");
 419                return -ENXIO;
 420        }
 421
 422        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 423        if (mem == NULL) {
 424                dev_err(&pdev->dev, "no memory address specified?\n");
 425                return -ENXIO;
 426        }
 427        msize = resource_size(mem);
 428        if (!request_mem_region(mem->start, msize, pdev->name))
 429                return -EBUSY;
 430
 431        dev = ____alloc_ei_netdev(0);
 432        if (dev == NULL) {
 433                release_mem_region(mem->start, msize);
 434                return -ENOMEM;
 435        }
 436
 437        SET_NETDEV_DEV(dev, &pdev->dev);
 438        platform_set_drvdata(pdev, dev);
 439        ei_local = netdev_priv(dev);
 440
 441        dev->irq = irq->start;
 442        dev->base_addr = mem->start;
 443
 444        ret = mcf8390_init(dev);
 445        if (ret) {
 446                release_mem_region(mem->start, msize);
 447                free_netdev(dev);
 448                return ret;
 449        }
 450        return 0;
 451}
 452
 453static int mcf8390_remove(struct platform_device *pdev)
 454{
 455        struct net_device *dev = platform_get_drvdata(pdev);
 456        struct resource *mem;
 457
 458        unregister_netdev(dev);
 459        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 460        if (mem)
 461                release_mem_region(mem->start, resource_size(mem));
 462        free_netdev(dev);
 463        return 0;
 464}
 465
 466static struct platform_driver mcf8390_drv = {
 467        .driver = {
 468                .name   = "mcf8390",
 469                .owner  = THIS_MODULE,
 470        },
 471        .probe          = mcf8390_probe,
 472        .remove         = mcf8390_remove,
 473};
 474
 475module_platform_driver(mcf8390_drv);
 476
 477MODULE_DESCRIPTION("MCF8390 ColdFire NS8390 driver");
 478MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>");
 479MODULE_LICENSE("GPL");
 480MODULE_ALIAS("platform:mcf8390");
 481