linux/drivers/net/ethernet/intel/igbvf/defines.h
<<
>>
Prefs
   1/*******************************************************************************
   2
   3  Intel(R) 82576 Virtual Function Linux driver
   4  Copyright(c) 1999 - 2012 Intel Corporation.
   5
   6  This program is free software; you can redistribute it and/or modify it
   7  under the terms and conditions of the GNU General Public License,
   8  version 2, as published by the Free Software Foundation.
   9
  10  This program is distributed in the hope it will be useful, but WITHOUT
  11  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13  more details.
  14
  15  You should have received a copy of the GNU General Public License along with
  16  this program; if not, write to the Free Software Foundation, Inc.,
  17  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19  The full GNU General Public License is included in this distribution in
  20  the file called "COPYING".
  21
  22  Contact Information:
  23  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  24  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  25
  26*******************************************************************************/
  27
  28#ifndef _E1000_DEFINES_H_
  29#define _E1000_DEFINES_H_
  30
  31/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
  32#define REQ_TX_DESCRIPTOR_MULTIPLE  8
  33#define REQ_RX_DESCRIPTOR_MULTIPLE  8
  34
  35/* IVAR valid bit */
  36#define E1000_IVAR_VALID        0x80
  37
  38/* Receive Descriptor bit definitions */
  39#define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
  40#define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
  41#define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
  42#define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
  43#define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
  44#define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
  45#define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
  46#define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
  47#define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
  48
  49#define E1000_RXDEXT_STATERR_LB    0x00040000
  50#define E1000_RXDEXT_STATERR_CE    0x01000000
  51#define E1000_RXDEXT_STATERR_SE    0x02000000
  52#define E1000_RXDEXT_STATERR_SEQ   0x04000000
  53#define E1000_RXDEXT_STATERR_CXE   0x10000000
  54#define E1000_RXDEXT_STATERR_TCPE  0x20000000
  55#define E1000_RXDEXT_STATERR_IPE   0x40000000
  56#define E1000_RXDEXT_STATERR_RXE   0x80000000
  57
  58
  59/* Same mask, but for extended and packet split descriptors */
  60#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
  61    E1000_RXDEXT_STATERR_CE  |            \
  62    E1000_RXDEXT_STATERR_SE  |            \
  63    E1000_RXDEXT_STATERR_SEQ |            \
  64    E1000_RXDEXT_STATERR_CXE |            \
  65    E1000_RXDEXT_STATERR_RXE)
  66
  67/* Device Control */
  68#define E1000_CTRL_RST      0x04000000  /* Global reset */
  69
  70/* Device Status */
  71#define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
  72#define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
  73#define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
  74#define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
  75#define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
  76#define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
  77
  78#define SPEED_10    10
  79#define SPEED_100   100
  80#define SPEED_1000  1000
  81#define HALF_DUPLEX 1
  82#define FULL_DUPLEX 2
  83
  84/* Transmit Descriptor bit definitions */
  85#define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
  86#define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
  87#define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
  88#define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
  89
  90#define MAX_JUMBO_FRAME_SIZE    0x3F00
  91
  92/* 802.1q VLAN Packet Size */
  93#define VLAN_TAG_SIZE              4    /* 802.3ac tag (not DMA'd) */
  94
  95/* Error Codes */
  96#define E1000_SUCCESS      0
  97#define E1000_ERR_CONFIG   3
  98#define E1000_ERR_MAC_INIT 5
  99#define E1000_ERR_MBX      15
 100
 101/* SRRCTL bit definitions */
 102#define E1000_SRRCTL_BSIZEPKT_SHIFT                     10 /* Shift _right_ */
 103#define E1000_SRRCTL_BSIZEHDRSIZE_MASK                  0x00000F00
 104#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT                 2  /* Shift _left_ */
 105#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF                0x02000000
 106#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS          0x0A000000
 107#define E1000_SRRCTL_DESCTYPE_MASK                      0x0E000000
 108#define E1000_SRRCTL_DROP_EN                            0x80000000
 109
 110#define E1000_SRRCTL_BSIZEPKT_MASK      0x0000007F
 111#define E1000_SRRCTL_BSIZEHDR_MASK      0x00003F00
 112
 113/* Additional Descriptor Control definitions */
 114#define E1000_TXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Tx Queue */
 115#define E1000_RXDCTL_QUEUE_ENABLE  0x02000000 /* Enable specific Rx Queue */
 116
 117/* Direct Cache Access (DCA) definitions */
 118#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
 119
 120#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
 121
 122#endif /* _E1000_DEFINES_H_ */
 123