linux/drivers/net/wan/wanxl.c
<<
>>
Prefs
   1/*
   2 * wanXL serial card driver for Linux
   3 * host part
   4 *
   5 * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
   6 *
   7 * This program is free software; you can redistribute it and/or modify it
   8 * under the terms of version 2 of the GNU General Public License
   9 * as published by the Free Software Foundation.
  10 *
  11 * Status:
  12 *   - Only DTE (external clock) support with NRZ and NRZI encodings
  13 *   - wanXL100 will require minor driver modifications, no access to hw
  14 */
  15
  16#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17
  18#include <linux/module.h>
  19#include <linux/kernel.h>
  20#include <linux/slab.h>
  21#include <linux/sched.h>
  22#include <linux/types.h>
  23#include <linux/fcntl.h>
  24#include <linux/string.h>
  25#include <linux/errno.h>
  26#include <linux/init.h>
  27#include <linux/interrupt.h>
  28#include <linux/ioport.h>
  29#include <linux/netdevice.h>
  30#include <linux/hdlc.h>
  31#include <linux/pci.h>
  32#include <linux/dma-mapping.h>
  33#include <linux/delay.h>
  34#include <asm/io.h>
  35
  36#include "wanxl.h"
  37
  38static const char* version = "wanXL serial card driver version: 0.48";
  39
  40#define PLX_CTL_RESET   0x40000000 /* adapter reset */
  41
  42#undef DEBUG_PKT
  43#undef DEBUG_PCI
  44
  45/* MAILBOX #1 - PUTS COMMANDS */
  46#define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */
  47#ifdef __LITTLE_ENDIAN
  48#define MBX1_CMD_BSWAP  0x8C000001 /* little-endian Byte Swap Mode */
  49#else
  50#define MBX1_CMD_BSWAP  0x8C000000 /* big-endian Byte Swap Mode */
  51#endif
  52
  53/* MAILBOX #2 - DRAM SIZE */
  54#define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */
  55
  56
  57typedef struct {
  58        struct net_device *dev;
  59        struct card_t *card;
  60        spinlock_t lock;        /* for wanxl_xmit */
  61        int node;               /* physical port #0 - 3 */
  62        unsigned int clock_type;
  63        int tx_in, tx_out;
  64        struct sk_buff *tx_skbs[TX_BUFFERS];
  65}port_t;
  66
  67
  68typedef struct {
  69        desc_t rx_descs[RX_QUEUE_LENGTH];
  70        port_status_t port_status[4];
  71}card_status_t;
  72
  73
  74typedef struct card_t {
  75        int n_ports;            /* 1, 2 or 4 ports */
  76        u8 irq;
  77
  78        u8 __iomem *plx;        /* PLX PCI9060 virtual base address */
  79        struct pci_dev *pdev;   /* for pci_name(pdev) */
  80        int rx_in;
  81        struct sk_buff *rx_skbs[RX_QUEUE_LENGTH];
  82        card_status_t *status;  /* shared between host and card */
  83        dma_addr_t status_address;
  84        port_t ports[0];        /* 1 - 4 port_t structures follow */
  85}card_t;
  86
  87
  88
  89static inline port_t* dev_to_port(struct net_device *dev)
  90{
  91        return (port_t *)dev_to_hdlc(dev)->priv;
  92}
  93
  94
  95static inline port_status_t* get_status(port_t *port)
  96{
  97        return &port->card->status->port_status[port->node];
  98}
  99
 100
 101#ifdef DEBUG_PCI
 102static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
 103                                              size_t size, int direction)
 104{
 105        dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
 106        if (addr + size > 0x100000000LL)
 107                pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n",
 108                        pci_name(pdev), (unsigned long long)addr);
 109        return addr;
 110}
 111
 112#undef pci_map_single
 113#define pci_map_single pci_map_single_debug
 114#endif
 115
 116
 117/* Cable and/or personality module change interrupt service */
 118static inline void wanxl_cable_intr(port_t *port)
 119{
 120        u32 value = get_status(port)->cable;
 121        int valid = 1;
 122        const char *cable, *pm, *dte = "", *dsr = "", *dcd = "";
 123
 124        switch(value & 0x7) {
 125        case STATUS_CABLE_V35: cable = "V.35"; break;
 126        case STATUS_CABLE_X21: cable = "X.21"; break;
 127        case STATUS_CABLE_V24: cable = "V.24"; break;
 128        case STATUS_CABLE_EIA530: cable = "EIA530"; break;
 129        case STATUS_CABLE_NONE: cable = "no"; break;
 130        default: cable = "invalid";
 131        }
 132
 133        switch((value >> STATUS_CABLE_PM_SHIFT) & 0x7) {
 134        case STATUS_CABLE_V35: pm = "V.35"; break;
 135        case STATUS_CABLE_X21: pm = "X.21"; break;
 136        case STATUS_CABLE_V24: pm = "V.24"; break;
 137        case STATUS_CABLE_EIA530: pm = "EIA530"; break;
 138        case STATUS_CABLE_NONE: pm = "no personality"; valid = 0; break;
 139        default: pm = "invalid personality"; valid = 0;
 140        }
 141
 142        if (valid) {
 143                if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) {
 144                        dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" :
 145                                ", DSR off";
 146                        dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" :
 147                                ", carrier off";
 148                }
 149                dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
 150        }
 151        netdev_info(port->dev, "%s%s module, %s cable%s%s\n",
 152                    pm, dte, cable, dsr, dcd);
 153
 154        if (value & STATUS_CABLE_DCD)
 155                netif_carrier_on(port->dev);
 156        else
 157                netif_carrier_off(port->dev);
 158}
 159
 160
 161
 162/* Transmit complete interrupt service */
 163static inline void wanxl_tx_intr(port_t *port)
 164{
 165        struct net_device *dev = port->dev;
 166        while (1) {
 167                desc_t *desc = &get_status(port)->tx_descs[port->tx_in];
 168                struct sk_buff *skb = port->tx_skbs[port->tx_in];
 169
 170                switch (desc->stat) {
 171                case PACKET_FULL:
 172                case PACKET_EMPTY:
 173                        netif_wake_queue(dev);
 174                        return;
 175
 176                case PACKET_UNDERRUN:
 177                        dev->stats.tx_errors++;
 178                        dev->stats.tx_fifo_errors++;
 179                        break;
 180
 181                default:
 182                        dev->stats.tx_packets++;
 183                        dev->stats.tx_bytes += skb->len;
 184                }
 185                desc->stat = PACKET_EMPTY; /* Free descriptor */
 186                pci_unmap_single(port->card->pdev, desc->address, skb->len,
 187                                 PCI_DMA_TODEVICE);
 188                dev_kfree_skb_irq(skb);
 189                port->tx_in = (port->tx_in + 1) % TX_BUFFERS;
 190        }
 191}
 192
 193
 194
 195/* Receive complete interrupt service */
 196static inline void wanxl_rx_intr(card_t *card)
 197{
 198        desc_t *desc;
 199        while (desc = &card->status->rx_descs[card->rx_in],
 200               desc->stat != PACKET_EMPTY) {
 201                if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
 202                        pr_crit("%s: received packet for nonexistent port\n",
 203                                pci_name(card->pdev));
 204                else {
 205                        struct sk_buff *skb = card->rx_skbs[card->rx_in];
 206                        port_t *port = &card->ports[desc->stat &
 207                                                    PACKET_PORT_MASK];
 208                        struct net_device *dev = port->dev;
 209
 210                        if (!skb)
 211                                dev->stats.rx_dropped++;
 212                        else {
 213                                pci_unmap_single(card->pdev, desc->address,
 214                                                 BUFFER_LENGTH,
 215                                                 PCI_DMA_FROMDEVICE);
 216                                skb_put(skb, desc->length);
 217
 218#ifdef DEBUG_PKT
 219                                printk(KERN_DEBUG "%s RX(%i):", dev->name,
 220                                       skb->len);
 221                                debug_frame(skb);
 222#endif
 223                                dev->stats.rx_packets++;
 224                                dev->stats.rx_bytes += skb->len;
 225                                skb->protocol = hdlc_type_trans(skb, dev);
 226                                netif_rx(skb);
 227                                skb = NULL;
 228                        }
 229
 230                        if (!skb) {
 231                                skb = dev_alloc_skb(BUFFER_LENGTH);
 232                                desc->address = skb ?
 233                                        pci_map_single(card->pdev, skb->data,
 234                                                       BUFFER_LENGTH,
 235                                                       PCI_DMA_FROMDEVICE) : 0;
 236                                card->rx_skbs[card->rx_in] = skb;
 237                        }
 238                }
 239                desc->stat = PACKET_EMPTY; /* Free descriptor */
 240                card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH;
 241        }
 242}
 243
 244
 245
 246static irqreturn_t wanxl_intr(int irq, void* dev_id)
 247{
 248        card_t *card = dev_id;
 249        int i;
 250        u32 stat;
 251        int handled = 0;
 252
 253
 254        while((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) {
 255                handled = 1;
 256                writel(stat, card->plx + PLX_DOORBELL_FROM_CARD);
 257
 258                for (i = 0; i < card->n_ports; i++) {
 259                        if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i)))
 260                                wanxl_tx_intr(&card->ports[i]);
 261                        if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i)))
 262                                wanxl_cable_intr(&card->ports[i]);
 263                }
 264                if (stat & (1 << DOORBELL_FROM_CARD_RX))
 265                        wanxl_rx_intr(card);
 266        }
 267
 268        return IRQ_RETVAL(handled);
 269}
 270
 271
 272
 273static netdev_tx_t wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
 274{
 275        port_t *port = dev_to_port(dev);
 276        desc_t *desc;
 277
 278        spin_lock(&port->lock);
 279
 280        desc = &get_status(port)->tx_descs[port->tx_out];
 281        if (desc->stat != PACKET_EMPTY) {
 282                /* should never happen - previous xmit should stop queue */
 283#ifdef DEBUG_PKT
 284                printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
 285#endif
 286                netif_stop_queue(dev);
 287                spin_unlock(&port->lock);
 288                return NETDEV_TX_BUSY;       /* request packet to be queued */
 289        }
 290
 291#ifdef DEBUG_PKT
 292        printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
 293        debug_frame(skb);
 294#endif
 295
 296        port->tx_skbs[port->tx_out] = skb;
 297        desc->address = pci_map_single(port->card->pdev, skb->data, skb->len,
 298                                       PCI_DMA_TODEVICE);
 299        desc->length = skb->len;
 300        desc->stat = PACKET_FULL;
 301        writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node),
 302               port->card->plx + PLX_DOORBELL_TO_CARD);
 303
 304        port->tx_out = (port->tx_out + 1) % TX_BUFFERS;
 305
 306        if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) {
 307                netif_stop_queue(dev);
 308#ifdef DEBUG_PKT
 309                printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
 310#endif
 311        }
 312
 313        spin_unlock(&port->lock);
 314        return NETDEV_TX_OK;
 315}
 316
 317
 318
 319static int wanxl_attach(struct net_device *dev, unsigned short encoding,
 320                        unsigned short parity)
 321{
 322        port_t *port = dev_to_port(dev);
 323
 324        if (encoding != ENCODING_NRZ &&
 325            encoding != ENCODING_NRZI)
 326                return -EINVAL;
 327
 328        if (parity != PARITY_NONE &&
 329            parity != PARITY_CRC32_PR1_CCITT &&
 330            parity != PARITY_CRC16_PR1_CCITT &&
 331            parity != PARITY_CRC32_PR0_CCITT &&
 332            parity != PARITY_CRC16_PR0_CCITT)
 333                return -EINVAL;
 334
 335        get_status(port)->encoding = encoding;
 336        get_status(port)->parity = parity;
 337        return 0;
 338}
 339
 340
 341
 342static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 343{
 344        const size_t size = sizeof(sync_serial_settings);
 345        sync_serial_settings line;
 346        port_t *port = dev_to_port(dev);
 347
 348        if (cmd != SIOCWANDEV)
 349                return hdlc_ioctl(dev, ifr, cmd);
 350
 351        switch (ifr->ifr_settings.type) {
 352        case IF_GET_IFACE:
 353                ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
 354                if (ifr->ifr_settings.size < size) {
 355                        ifr->ifr_settings.size = size; /* data size wanted */
 356                        return -ENOBUFS;
 357                }
 358                line.clock_type = get_status(port)->clocking;
 359                line.clock_rate = 0;
 360                line.loopback = 0;
 361
 362                if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &line, size))
 363                        return -EFAULT;
 364                return 0;
 365
 366        case IF_IFACE_SYNC_SERIAL:
 367                if (!capable(CAP_NET_ADMIN))
 368                        return -EPERM;
 369                if (dev->flags & IFF_UP)
 370                        return -EBUSY;
 371
 372                if (copy_from_user(&line, ifr->ifr_settings.ifs_ifsu.sync,
 373                                   size))
 374                        return -EFAULT;
 375
 376                if (line.clock_type != CLOCK_EXT &&
 377                    line.clock_type != CLOCK_TXFROMRX)
 378                        return -EINVAL; /* No such clock setting */
 379
 380                if (line.loopback != 0)
 381                        return -EINVAL;
 382
 383                get_status(port)->clocking = line.clock_type;
 384                return 0;
 385
 386        default:
 387                return hdlc_ioctl(dev, ifr, cmd);
 388        }
 389}
 390
 391
 392
 393static int wanxl_open(struct net_device *dev)
 394{
 395        port_t *port = dev_to_port(dev);
 396        u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD;
 397        unsigned long timeout;
 398        int i;
 399
 400        if (get_status(port)->open) {
 401                netdev_err(dev, "port already open\n");
 402                return -EIO;
 403        }
 404        if ((i = hdlc_open(dev)) != 0)
 405                return i;
 406
 407        port->tx_in = port->tx_out = 0;
 408        for (i = 0; i < TX_BUFFERS; i++)
 409                get_status(port)->tx_descs[i].stat = PACKET_EMPTY;
 410        /* signal the card */
 411        writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr);
 412
 413        timeout = jiffies + HZ;
 414        do {
 415                if (get_status(port)->open) {
 416                        netif_start_queue(dev);
 417                        return 0;
 418                }
 419        } while (time_after(timeout, jiffies));
 420
 421        netdev_err(dev, "unable to open port\n");
 422        /* ask the card to close the port, should it be still alive */
 423        writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
 424        return -EFAULT;
 425}
 426
 427
 428
 429static int wanxl_close(struct net_device *dev)
 430{
 431        port_t *port = dev_to_port(dev);
 432        unsigned long timeout;
 433        int i;
 434
 435        hdlc_close(dev);
 436        /* signal the card */
 437        writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node),
 438               port->card->plx + PLX_DOORBELL_TO_CARD);
 439
 440        timeout = jiffies + HZ;
 441        do {
 442                if (!get_status(port)->open)
 443                        break;
 444        } while (time_after(timeout, jiffies));
 445
 446        if (get_status(port)->open)
 447                netdev_err(dev, "unable to close port\n");
 448
 449        netif_stop_queue(dev);
 450
 451        for (i = 0; i < TX_BUFFERS; i++) {
 452                desc_t *desc = &get_status(port)->tx_descs[i];
 453
 454                if (desc->stat != PACKET_EMPTY) {
 455                        desc->stat = PACKET_EMPTY;
 456                        pci_unmap_single(port->card->pdev, desc->address,
 457                                         port->tx_skbs[i]->len,
 458                                         PCI_DMA_TODEVICE);
 459                        dev_kfree_skb(port->tx_skbs[i]);
 460                }
 461        }
 462        return 0;
 463}
 464
 465
 466
 467static struct net_device_stats *wanxl_get_stats(struct net_device *dev)
 468{
 469        port_t *port = dev_to_port(dev);
 470
 471        dev->stats.rx_over_errors = get_status(port)->rx_overruns;
 472        dev->stats.rx_frame_errors = get_status(port)->rx_frame_errors;
 473        dev->stats.rx_errors = dev->stats.rx_over_errors +
 474                dev->stats.rx_frame_errors;
 475        return &dev->stats;
 476}
 477
 478
 479
 480static int wanxl_puts_command(card_t *card, u32 cmd)
 481{
 482        unsigned long timeout = jiffies + 5 * HZ;
 483
 484        writel(cmd, card->plx + PLX_MAILBOX_1);
 485        do {
 486                if (readl(card->plx + PLX_MAILBOX_1) == 0)
 487                        return 0;
 488
 489                schedule();
 490        }while (time_after(timeout, jiffies));
 491
 492        return -1;
 493}
 494
 495
 496
 497static void wanxl_reset(card_t *card)
 498{
 499        u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET;
 500
 501        writel(0x80, card->plx + PLX_MAILBOX_0);
 502        writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL);
 503        readl(card->plx + PLX_CONTROL); /* wait for posted write */
 504        udelay(1);
 505        writel(old_value, card->plx + PLX_CONTROL);
 506        readl(card->plx + PLX_CONTROL); /* wait for posted write */
 507}
 508
 509
 510
 511static void wanxl_pci_remove_one(struct pci_dev *pdev)
 512{
 513        card_t *card = pci_get_drvdata(pdev);
 514        int i;
 515
 516        for (i = 0; i < card->n_ports; i++) {
 517                unregister_hdlc_device(card->ports[i].dev);
 518                free_netdev(card->ports[i].dev);
 519        }
 520
 521        /* unregister and free all host resources */
 522        if (card->irq)
 523                free_irq(card->irq, card);
 524
 525        wanxl_reset(card);
 526
 527        for (i = 0; i < RX_QUEUE_LENGTH; i++)
 528                if (card->rx_skbs[i]) {
 529                        pci_unmap_single(card->pdev,
 530                                         card->status->rx_descs[i].address,
 531                                         BUFFER_LENGTH, PCI_DMA_FROMDEVICE);
 532                        dev_kfree_skb(card->rx_skbs[i]);
 533                }
 534
 535        if (card->plx)
 536                iounmap(card->plx);
 537
 538        if (card->status)
 539                pci_free_consistent(pdev, sizeof(card_status_t),
 540                                    card->status, card->status_address);
 541
 542        pci_release_regions(pdev);
 543        pci_disable_device(pdev);
 544        pci_set_drvdata(pdev, NULL);
 545        kfree(card);
 546}
 547
 548
 549#include "wanxlfw.inc"
 550
 551static const struct net_device_ops wanxl_ops = {
 552        .ndo_open       = wanxl_open,
 553        .ndo_stop       = wanxl_close,
 554        .ndo_change_mtu = hdlc_change_mtu,
 555        .ndo_start_xmit = hdlc_start_xmit,
 556        .ndo_do_ioctl   = wanxl_ioctl,
 557        .ndo_get_stats  = wanxl_get_stats,
 558};
 559
 560static int wanxl_pci_init_one(struct pci_dev *pdev,
 561                              const struct pci_device_id *ent)
 562{
 563        card_t *card;
 564        u32 ramsize, stat;
 565        unsigned long timeout;
 566        u32 plx_phy;            /* PLX PCI base address */
 567        u32 mem_phy;            /* memory PCI base addr */
 568        u8 __iomem *mem;        /* memory virtual base addr */
 569        int i, ports, alloc_size;
 570
 571#ifndef MODULE
 572        pr_info_once("%s\n", version);
 573#endif
 574
 575        i = pci_enable_device(pdev);
 576        if (i)
 577                return i;
 578
 579        /* QUICC can only access first 256 MB of host RAM directly,
 580           but PLX9060 DMA does 32-bits for actual packet data transfers */
 581
 582        /* FIXME when PCI/DMA subsystems are fixed.
 583           We set both dma_mask and consistent_dma_mask to 28 bits
 584           and pray pci_alloc_consistent() will use this info. It should
 585           work on most platforms */
 586        if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
 587            pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
 588                pr_err("No usable DMA configuration\n");
 589                return -EIO;
 590        }
 591
 592        i = pci_request_regions(pdev, "wanXL");
 593        if (i) {
 594                pci_disable_device(pdev);
 595                return i;
 596        }
 597
 598        switch (pdev->device) {
 599        case PCI_DEVICE_ID_SBE_WANXL100: ports = 1; break;
 600        case PCI_DEVICE_ID_SBE_WANXL200: ports = 2; break;
 601        default: ports = 4;
 602        }
 603
 604        alloc_size = sizeof(card_t) + ports * sizeof(port_t);
 605        card = kzalloc(alloc_size, GFP_KERNEL);
 606        if (card == NULL) {
 607                pci_release_regions(pdev);
 608                pci_disable_device(pdev);
 609                return -ENOBUFS;
 610        }
 611
 612        pci_set_drvdata(pdev, card);
 613        card->pdev = pdev;
 614
 615        card->status = pci_alloc_consistent(pdev, sizeof(card_status_t),
 616                                            &card->status_address);
 617        if (card->status == NULL) {
 618                wanxl_pci_remove_one(pdev);
 619                return -ENOBUFS;
 620        }
 621
 622#ifdef DEBUG_PCI
 623        printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
 624               " at 0x%LX\n", pci_name(pdev),
 625               (unsigned long long)card->status_address);
 626#endif
 627
 628        /* FIXME when PCI/DMA subsystems are fixed.
 629           We set both dma_mask and consistent_dma_mask back to 32 bits
 630           to indicate the card can do 32-bit DMA addressing */
 631        if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) ||
 632            pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
 633                pr_err("No usable DMA configuration\n");
 634                wanxl_pci_remove_one(pdev);
 635                return -EIO;
 636        }
 637
 638        /* set up PLX mapping */
 639        plx_phy = pci_resource_start(pdev, 0);
 640
 641        card->plx = ioremap_nocache(plx_phy, 0x70);
 642        if (!card->plx) {
 643                pr_err("ioremap() failed\n");
 644                wanxl_pci_remove_one(pdev);
 645                return -EFAULT;
 646        }
 647
 648#if RESET_WHILE_LOADING
 649        wanxl_reset(card);
 650#endif
 651
 652        timeout = jiffies + 20 * HZ;
 653        while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
 654                if (time_before(timeout, jiffies)) {
 655                        pr_warn("%s: timeout waiting for PUTS to complete\n",
 656                                pci_name(pdev));
 657                        wanxl_pci_remove_one(pdev);
 658                        return -ENODEV;
 659                }
 660
 661                switch(stat & 0xC0) {
 662                case 0x00:      /* hmm - PUTS completed with non-zero code? */
 663                case 0x80:      /* PUTS still testing the hardware */
 664                        break;
 665
 666                default:
 667                        pr_warn("%s: PUTS test 0x%X failed\n",
 668                                pci_name(pdev), stat & 0x30);
 669                        wanxl_pci_remove_one(pdev);
 670                        return -ENODEV;
 671                }
 672
 673                schedule();
 674        }
 675
 676        /* get on-board memory size (PUTS detects no more than 4 MB) */
 677        ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK;
 678
 679        /* set up on-board RAM mapping */
 680        mem_phy = pci_resource_start(pdev, 2);
 681
 682
 683        /* sanity check the board's reported memory size */
 684        if (ramsize < BUFFERS_ADDR +
 685            (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
 686                pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n",
 687                        pci_name(pdev), ramsize,
 688                        BUFFERS_ADDR +
 689                        (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
 690                wanxl_pci_remove_one(pdev);
 691                return -ENODEV;
 692        }
 693
 694        if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
 695                pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev));
 696                wanxl_pci_remove_one(pdev);
 697                return -ENODEV;
 698        }
 699
 700        for (i = 0; i < RX_QUEUE_LENGTH; i++) {
 701                struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH);
 702                card->rx_skbs[i] = skb;
 703                if (skb)
 704                        card->status->rx_descs[i].address =
 705                                pci_map_single(card->pdev, skb->data,
 706                                               BUFFER_LENGTH,
 707                                               PCI_DMA_FROMDEVICE);
 708        }
 709
 710        mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware));
 711        if (!mem) {
 712                pr_err("ioremap() failed\n");
 713                wanxl_pci_remove_one(pdev);
 714                return -EFAULT;
 715        }
 716
 717        for (i = 0; i < sizeof(firmware); i += 4)
 718                writel(ntohl(*(__be32*)(firmware + i)), mem + PDM_OFFSET + i);
 719
 720        for (i = 0; i < ports; i++)
 721                writel(card->status_address +
 722                       (void *)&card->status->port_status[i] -
 723                       (void *)card->status, mem + PDM_OFFSET + 4 + i * 4);
 724        writel(card->status_address, mem + PDM_OFFSET + 20);
 725        writel(PDM_OFFSET, mem);
 726        iounmap(mem);
 727
 728        writel(0, card->plx + PLX_MAILBOX_5);
 729
 730        if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
 731                pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev));
 732                wanxl_pci_remove_one(pdev);
 733                return -ENODEV;
 734        }
 735
 736        stat = 0;
 737        timeout = jiffies + 5 * HZ;
 738        do {
 739                if ((stat = readl(card->plx + PLX_MAILBOX_5)) != 0)
 740                        break;
 741                schedule();
 742        }while (time_after(timeout, jiffies));
 743
 744        if (!stat) {
 745                pr_warn("%s: timeout while initializing card firmware\n",
 746                        pci_name(pdev));
 747                wanxl_pci_remove_one(pdev);
 748                return -ENODEV;
 749        }
 750
 751#if DETECT_RAM
 752        ramsize = stat;
 753#endif
 754
 755        pr_info("%s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
 756                pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
 757
 758        /* Allocate IRQ */
 759        if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
 760                pr_warn("%s: could not allocate IRQ%i\n",
 761                        pci_name(pdev), pdev->irq);
 762                wanxl_pci_remove_one(pdev);
 763                return -EBUSY;
 764        }
 765        card->irq = pdev->irq;
 766
 767        for (i = 0; i < ports; i++) {
 768                hdlc_device *hdlc;
 769                port_t *port = &card->ports[i];
 770                struct net_device *dev = alloc_hdlcdev(port);
 771                if (!dev) {
 772                        pr_err("%s: unable to allocate memory\n",
 773                               pci_name(pdev));
 774                        wanxl_pci_remove_one(pdev);
 775                        return -ENOMEM;
 776                }
 777
 778                port->dev = dev;
 779                hdlc = dev_to_hdlc(dev);
 780                spin_lock_init(&port->lock);
 781                dev->tx_queue_len = 50;
 782                dev->netdev_ops = &wanxl_ops;
 783                hdlc->attach = wanxl_attach;
 784                hdlc->xmit = wanxl_xmit;
 785                port->card = card;
 786                port->node = i;
 787                get_status(port)->clocking = CLOCK_EXT;
 788                if (register_hdlc_device(dev)) {
 789                        pr_err("%s: unable to register hdlc device\n",
 790                               pci_name(pdev));
 791                        free_netdev(dev);
 792                        wanxl_pci_remove_one(pdev);
 793                        return -ENOBUFS;
 794                }
 795                card->n_ports++;
 796        }
 797
 798        pr_info("%s: port", pci_name(pdev));
 799        for (i = 0; i < ports; i++)
 800                pr_cont("%s #%i: %s",
 801                        i ? "," : "", i, card->ports[i].dev->name);
 802        pr_cont("\n");
 803
 804        for (i = 0; i < ports; i++)
 805                wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
 806
 807        return 0;
 808}
 809
 810static DEFINE_PCI_DEVICE_TABLE(wanxl_pci_tbl) = {
 811        { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID,
 812          PCI_ANY_ID, 0, 0, 0 },
 813        { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID,
 814          PCI_ANY_ID, 0, 0, 0 },
 815        { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID,
 816          PCI_ANY_ID, 0, 0, 0 },
 817        { 0, }
 818};
 819
 820
 821static struct pci_driver wanxl_pci_driver = {
 822        .name           = "wanXL",
 823        .id_table       = wanxl_pci_tbl,
 824        .probe          = wanxl_pci_init_one,
 825        .remove         = wanxl_pci_remove_one,
 826};
 827
 828
 829static int __init wanxl_init_module(void)
 830{
 831#ifdef MODULE
 832        pr_info("%s\n", version);
 833#endif
 834        return pci_register_driver(&wanxl_pci_driver);
 835}
 836
 837static void __exit wanxl_cleanup_module(void)
 838{
 839        pci_unregister_driver(&wanxl_pci_driver);
 840}
 841
 842
 843MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
 844MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver");
 845MODULE_LICENSE("GPL v2");
 846MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl);
 847
 848module_init(wanxl_init_module);
 849module_exit(wanxl_cleanup_module);
 850