/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called COPYING.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#include <linux/slab.h>
#include <net/mac80211.h>

#include "iwl-trans.h"

#include "dev.h"
#include "calib.h"
#include "agn.h"

/*****************************************************************************
 * INIT calibrations framework
 *****************************************************************************/

/* Opaque calibration results */
struct iwl_calib_result {
        struct list_head list;
        size_t cmd_len;
        struct iwl_calib_hdr hdr;
        /* data follows */
};

struct statistics_general_data {
        u32 beacon_silence_rssi_a;
        u32 beacon_silence_rssi_b;
        u32 beacon_silence_rssi_c;
        u32 beacon_energy_a;
        u32 beacon_energy_b;
        u32 beacon_energy_c;
};

int iwl_send_calib_results(struct iwl_priv *priv)
{
        struct iwl_host_cmd hcmd = {
                .id = REPLY_PHY_CALIBRATION_CMD,
                .flags = CMD_SYNC,
        };
        struct iwl_calib_result *res;

        list_for_each_entry(res, &priv->calib_results, list) {
                int ret;

                hcmd.len[0] = res->cmd_len;
                hcmd.data[0] = &res->hdr;
                hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
                ret = iwl_dvm_send_cmd(priv, &hcmd);
                if (ret) {
                        IWL_ERR(priv, "Error %d on calib cmd %d\n",
                                ret, res->hdr.op_code);
                        return ret;
                }
        }

        return 0;
}

int iwl_calib_set(struct iwl_priv *priv,
                  const struct iwl_calib_hdr *cmd, int len)
{
        struct iwl_calib_result *res, *tmp;

        res = kmalloc(sizeof(*res) + len - sizeof(struct iwl_calib_hdr),
                      GFP_ATOMIC);
        if (!res)
                return -ENOMEM;
        memcpy(&res->hdr, cmd, len);
        res->cmd_len = len;

        list_for_each_entry(tmp, &priv->calib_results, list) {
                if (tmp->hdr.op_code == res->hdr.op_code) {
                        list_replace(&tmp->list, &res->list);
                        kfree(tmp);
                        return 0;
                }
        }

        /* wasn't in list already */
        list_add_tail(&res->list, &priv->calib_results);

        return 0;
}

void iwl_calib_free_results(struct iwl_priv *priv)
{
        struct iwl_calib_result *res, *tmp;

        list_for_each_entry_safe(res, tmp, &priv->calib_results, list) {
                list_del(&res->list);
                kfree(res);
        }
}

/*****************************************************************************
 * RUNTIME calibrations framework
 *****************************************************************************/

/* "false alarms" are signals that our DSP tries to lock onto,
 *   but then determines that they are either noise, or transmissions
 *   from a distant wireless network (also "noise", really) that get
 *   "stepped on" by stronger transmissions within our own network.
 * This algorithm attempts to set a sensitivity level that is high
 *   enough to receive all of our own network traffic, but not so
 *   high that our DSP gets too busy trying to lock onto non-network
 *   activity/noise. */
static int iwl_sens_energy_cck(struct iwl_priv *priv,
                                   u32 norm_fa,
                                   u32 rx_enable_time,
                                   struct statistics_general_data *rx_info)
{
        u32 max_nrg_cck = 0;
        int i = 0;
        u8 max_silence_rssi = 0;
        u32 silence_ref = 0;
        u8 silence_rssi_a = 0;
        u8 silence_rssi_b = 0;
        u8 silence_rssi_c = 0;
        u32 val;

        /* "false_alarms" values below are cross-multiplications to assess the
         *   numbers of false alarms within the measured period of actual Rx
         *   (Rx is off when we're txing), vs the min/max expected false alarms
         *   (some should be expected if rx is sensitive enough) in a
         *   hypothetical listening period of 200 time units (TU), 204.8 msec:
         *
         * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
         *
         * */
        u32 false_alarms = norm_fa * 200 * 1024;
        u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
        u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
        struct iwl_sensitivity_data *data = NULL;
        const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;

        data = &(priv->sensitivity_data);

        data->nrg_auto_corr_silence_diff = 0;

        /* Find max silence rssi among all 3 receivers.
         * This is background noise, which may include transmissions from other
         *    networks, measured during silence before our network's beacon */
        silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
                            ALL_BAND_FILTER) >> 8);
        silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
                            ALL_BAND_FILTER) >> 8);
        silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
                            ALL_BAND_FILTER) >> 8);

        val = max(silence_rssi_b, silence_rssi_c);
        max_silence_rssi = max(silence_rssi_a, (u8) val);

        /* Store silence rssi in 20-beacon history table */
        data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
        data->nrg_silence_idx++;
        if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
                data->nrg_silence_idx = 0;

        /* Find max silence rssi across 20 beacon history */
        for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
                val = data->nrg_silence_rssi[i];
                silence_ref = max(silence_ref, val);
        }
        IWL_DEBUG_CALIB(priv, "silence a %u, b %u, c %u, 20-bcn max %u\n",
                        silence_rssi_a, silence_rssi_b, silence_rssi_c,
                        silence_ref);

        /* Find max rx energy (min value!) among all 3 receivers,
         *   measured during beacon frame.
         * Save it in 10-beacon history table. */
        i = data->nrg_energy_idx;
        val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
        data->nrg_value[i] = min(rx_info->beacon_energy_a, val);

        data->nrg_energy_idx++;
        if (data->nrg_energy_idx >= 10)
                data->nrg_energy_idx = 0;

        /* Find min rx energy (max value) across 10 beacon history.
         * This is the minimum signal level that we want to receive well.
         * Add backoff (margin so we don't miss slightly lower energy frames).
         * This establishes an upper bound (min value) for energy threshold. */
        max_nrg_cck = data->nrg_value[0];
        for (i = 1; i < 10; i++)
                max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
        max_nrg_cck += 6;

        IWL_DEBUG_CALIB(priv, "rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
                        rx_info->beacon_energy_a, rx_info->beacon_energy_b,
                        rx_info->beacon_energy_c, max_nrg_cck - 6);

        /* Count number of consecutive beacons with fewer-than-desired
         *   false alarms. */
        if (false_alarms < min_false_alarms)
                data->num_in_cck_no_fa++;
        else
                data->num_in_cck_no_fa = 0;
        IWL_DEBUG_CALIB(priv, "consecutive bcns with few false alarms = %u\n",
                        data->num_in_cck_no_fa);

        /* If we got too many false alarms this time, reduce sensitivity */
        if ((false_alarms > max_false_alarms) &&
                (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
                IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u\n",
                     false_alarms, max_false_alarms);
                IWL_DEBUG_CALIB(priv, "... reducing sensitivity\n");
                data->nrg_curr_state = IWL_FA_TOO_MANY;
                /* Store for "fewer than desired" on later beacon */
                data->nrg_silence_ref = silence_ref;

                /* increase energy threshold (reduce nrg value)
                 *   to decrease sensitivity */
                data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK;
        /* Else if we got fewer than desired, increase sensitivity */
        } else if (false_alarms < min_false_alarms) {
                data->nrg_curr_state = IWL_FA_TOO_FEW;

                /* Compare silence level with silence level for most recent
                 *   healthy number or too many false alarms */
                data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
                                                   (s32)silence_ref;

                IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u, silence diff %d\n",
                         false_alarms, min_false_alarms,
                         data->nrg_auto_corr_silence_diff);

                /* Increase value to increase sensitivity, but only if:
                 * 1a) previous beacon did *not* have *too many* false alarms
                 * 1b) AND there's a significant difference in Rx levels
                 *      from a previous beacon with too many, or healthy # FAs
                 * OR 2) We've seen a lot of beacons (100) with too few
                 *       false alarms */
                if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
                        ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
                        (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {

                        IWL_DEBUG_CALIB(priv, "... increasing sensitivity\n");
                        /* Increase nrg value to increase sensitivity */
                        val = data->nrg_th_cck + NRG_STEP_CCK;
                        data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val);
                } else {
                        IWL_DEBUG_CALIB(priv, "... but not changing sensitivity\n");
                }

        /* Else we got a healthy number of false alarms, keep status quo */
        } else {
                IWL_DEBUG_CALIB(priv, " FA in safe zone\n");
                data->nrg_curr_state = IWL_FA_GOOD_RANGE;

                /* Store for use in "fewer than desired" with later beacon */
                data->nrg_silence_ref = silence_ref;

                /* If previous beacon had too many false alarms,
                 *   give it some extra margin by reducing sensitivity again
                 *   (but don't go below measured energy of desired Rx) */
                if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
                        IWL_DEBUG_CALIB(priv, "... increasing margin\n");
                        if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
                                data->nrg_th_cck -= NRG_MARGIN;
                        else
                                data->nrg_th_cck = max_nrg_cck;
                }
        }

        /* Make sure the energy threshold does not go above the measured
         * energy of the desired Rx signals (reduced by backoff margin),
         * or else we might start missing Rx frames.
         * Lower value is higher energy, so we use max()!
         */
        data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
        IWL_DEBUG_CALIB(priv, "new nrg_th_cck %u\n", data->nrg_th_cck);

        data->nrg_prev_state = data->nrg_curr_state;

        /* Auto-correlation CCK algorithm */
        if (false_alarms > min_false_alarms) {

                /* increase auto_corr values to decrease sensitivity
                 * so the DSP won't be disturbed by the noise
                 */
                if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
                        data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
                else {
                        val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
                        data->auto_corr_cck =
                                min((u32)ranges->auto_corr_max_cck, val);
                }
                val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
                data->auto_corr_cck_mrc =
                        min((u32)ranges->auto_corr_max_cck_mrc, val);
        } else if ((false_alarms < min_false_alarms) &&
           ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
           (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {

                /* Decrease auto_corr values to increase sensitivity */
                val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
                data->auto_corr_cck =
                        max((u32)ranges->auto_corr_min_cck, val);
                val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
                data->auto_corr_cck_mrc =
                        max((u32)ranges->auto_corr_min_cck_mrc, val);
        }

        return 0;
}


static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
                                       u32 norm_fa,
                                       u32 rx_enable_time)
{
        u32 val;
        u32 false_alarms = norm_fa * 200 * 1024;
        u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
        u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
        struct iwl_sensitivity_data *data = NULL;
        const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;

        data = &(priv->sensitivity_data);

        /* If we got too many false alarms this time, reduce sensitivity */
        if (false_alarms > max_false_alarms) {

                IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u)\n",
                             false_alarms, max_false_alarms);

                val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm =
                        min((u32)ranges->auto_corr_max_ofdm, val);

                val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc =
                        min((u32)ranges->auto_corr_max_ofdm_mrc, val);

                val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_x1 =
                        min((u32)ranges->auto_corr_max_ofdm_x1, val);

                val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc_x1 =
                        min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val);
        }

        /* Else if we got fewer than desired, increase sensitivity */
        else if (false_alarms < min_false_alarms) {

                IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u\n",
                             false_alarms, min_false_alarms);

                val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm =
                        max((u32)ranges->auto_corr_min_ofdm, val);

                val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc =
                        max((u32)ranges->auto_corr_min_ofdm_mrc, val);

                val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_x1 =
                        max((u32)ranges->auto_corr_min_ofdm_x1, val);

                val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc_x1 =
                        max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val);
        } else {
                IWL_DEBUG_CALIB(priv, "min FA %u < norm FA %u < max FA %u OK\n",
                         min_false_alarms, false_alarms, max_false_alarms);
        }
        return 0;
}

static void iwl_prepare_legacy_sensitivity_tbl(struct iwl_priv *priv,
                                struct iwl_sensitivity_data *data,
                                __le16 *tbl)
{
        tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
                                cpu_to_le16((u16)data->auto_corr_ofdm);
        tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
                                cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
        tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
                                cpu_to_le16((u16)data->auto_corr_ofdm_x1);
        tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
                                cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);

        tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
                                cpu_to_le16((u16)data->auto_corr_cck);
        tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
                                cpu_to_le16((u16)data->auto_corr_cck_mrc);

        tbl[HD_MIN_ENERGY_CCK_DET_INDEX] =
                                cpu_to_le16((u16)data->nrg_th_cck);
        tbl[HD_MIN_ENERGY_OFDM_DET_INDEX] =
                                cpu_to_le16((u16)data->nrg_th_ofdm);

        tbl[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
                                cpu_to_le16(data->barker_corr_th_min);
        tbl[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
                                cpu_to_le16(data->barker_corr_th_min_mrc);
        tbl[HD_OFDM_ENERGY_TH_IN_INDEX] =
                                cpu_to_le16(data->nrg_th_cca);

        IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
                        data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
                        data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
                        data->nrg_th_ofdm);

        IWL_DEBUG_CALIB(priv, "cck: ac %u mrc %u thresh %u\n",
                        data->auto_corr_cck, data->auto_corr_cck_mrc,
                        data->nrg_th_cck);
}

/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
static int iwl_sensitivity_write(struct iwl_priv *priv)
{
        struct iwl_sensitivity_cmd cmd;
        struct iwl_sensitivity_data *data = NULL;
        struct iwl_host_cmd cmd_out = {
                .id = SENSITIVITY_CMD,
                .len = { sizeof(struct iwl_sensitivity_cmd), },
                .flags = CMD_ASYNC,
                .data = { &cmd, },
        };

        data = &(priv->sensitivity_data);

        memset(&cmd, 0, sizeof(cmd));

        iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.table[0]);

        /* Update uCode's "work" table, and copy it to DSP */
        cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;

        /* Don't send command to uCode if nothing has changed */
        if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
                    sizeof(u16)*HD_TABLE_SIZE)) {
                IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
                return 0;
        }

        /* Copy table for comparison next time */
        memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
               sizeof(u16)*HD_TABLE_SIZE);

        return iwl_dvm_send_cmd(priv, &cmd_out);
}

/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
static int iwl_enhance_sensitivity_write(struct iwl_priv *priv)
{
        struct iwl_enhance_sensitivity_cmd cmd;
        struct iwl_sensitivity_data *data = NULL;
        struct iwl_host_cmd cmd_out = {
                .id = SENSITIVITY_CMD,
                .len = { sizeof(struct iwl_enhance_sensitivity_cmd), },
                .flags = CMD_ASYNC,
                .data = { &cmd, },
        };

        data = &(priv->sensitivity_data);

        memset(&cmd, 0, sizeof(cmd));

        iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.enhance_table[0]);

        if (priv->lib->hd_v2) {
                cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] =
                        HD_INA_NON_SQUARE_DET_OFDM_DATA_V2;
                cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] =
                        HD_INA_NON_SQUARE_DET_CCK_DATA_V2;
                cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] =
                        HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
                        HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
                        HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] =
                        HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] =
                        HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2;
        } else {
                cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] =
                        HD_INA_NON_SQUARE_DET_OFDM_DATA_V1;
                cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] =
                        HD_INA_NON_SQUARE_DET_CCK_DATA_V1;
                cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] =
                        HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1;
                cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] =
                        HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
                        HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
                        HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] =
                        HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1;
                cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] =
                        HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1;
        }

        /* Update uCode's "work" table, and copy it to DSP */
        cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;

        /* Don't send command to uCode if nothing has changed */
        if (!memcmp(&cmd.enhance_table[0], &(priv->sensitivity_tbl[0]),
                    sizeof(u16)*HD_TABLE_SIZE) &&
            !memcmp(&cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX],
                    &(priv->enhance_sensitivity_tbl[0]),
                    sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES)) {
                IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
                return 0;
        }

        /* Copy table for comparison next time */
        memcpy(&(priv->sensitivity_tbl[0]), &(cmd.enhance_table[0]),
               sizeof(u16)*HD_TABLE_SIZE);
        memcpy(&(priv->enhance_sensitivity_tbl[0]),
               &(cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX]),
               sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES);

        return iwl_dvm_send_cmd(priv, &cmd_out);
}

void iwl_init_sensitivity(struct iwl_priv *priv)
{
        int ret = 0;
        int i;
        struct iwl_sensitivity_data *data = NULL;
        const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;

        if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED)
                return;

        IWL_DEBUG_CALIB(priv, "Start iwl_init_sensitivity\n");

        /* Clear driver's sensitivity algo data */
        data = &(priv->sensitivity_data);

        if (ranges == NULL)
                return;

        memset(data, 0, sizeof(struct iwl_sensitivity_data));

        data->num_in_cck_no_fa = 0;
        data->nrg_curr_state = IWL_FA_TOO_MANY;
        data->nrg_prev_state = IWL_FA_TOO_MANY;
        data->nrg_silence_ref = 0;
        data->nrg_silence_idx = 0;
        data->nrg_energy_idx = 0;

        for (i = 0; i < 10; i++)
                data->nrg_value[i] = 0;

        for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
                data->nrg_silence_rssi[i] = 0;

        data->auto_corr_ofdm =  ranges->auto_corr_min_ofdm;
        data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
        data->auto_corr_ofdm_x1  = ranges->auto_corr_min_ofdm_x1;
        data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
        data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
        data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
        data->nrg_th_cck = ranges->nrg_th_cck;
        data->nrg_th_ofdm = ranges->nrg_th_ofdm;
        data->barker_corr_th_min = ranges->barker_corr_th_min;
        data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc;
        data->nrg_th_cca = ranges->nrg_th_cca;

        data->last_bad_plcp_cnt_ofdm = 0;
        data->last_fa_cnt_ofdm = 0;
        data->last_bad_plcp_cnt_cck = 0;
        data->last_fa_cnt_cck = 0;

        if (priv->fw->enhance_sensitivity_table)
                ret |= iwl_enhance_sensitivity_write(priv);
        else
                ret |= iwl_sensitivity_write(priv);
        IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret);
}

void iwl_sensitivity_calibration(struct iwl_priv *priv)
{
        u32 rx_enable_time;
        u32 fa_cck;
        u32 fa_ofdm;
        u32 bad_plcp_cck;
        u32 bad_plcp_ofdm;
        u32 norm_fa_ofdm;
        u32 norm_fa_cck;
        struct iwl_sensitivity_data *data = NULL;
        struct statistics_rx_non_phy *rx_info;
        struct statistics_rx_phy *ofdm, *cck;
        struct statistics_general_data statis;

        if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED)
                return;

        data = &(priv->sensitivity_data);

        if (!iwl_is_any_associated(priv)) {
                IWL_DEBUG_CALIB(priv, "<< - not associated\n");
                return;
        }

        spin_lock_bh(&priv->statistics.lock);
        rx_info = &priv->statistics.rx_non_phy;
        ofdm = &priv->statistics.rx_ofdm;
        cck = &priv->statistics.rx_cck;
        if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
                IWL_DEBUG_CALIB(priv, "<< invalid data.\n");
                spin_unlock_bh(&priv->statistics.lock);
                return;
        }

        /* Extract Statistics: */
        rx_enable_time = le32_to_cpu(rx_info->channel_load);
        fa_cck = le32_to_cpu(cck->false_alarm_cnt);
        fa_ofdm = le32_to_cpu(ofdm->false_alarm_cnt);
        bad_plcp_cck = le32_to_cpu(cck->plcp_err);
        bad_plcp_ofdm = le32_to_cpu(ofdm->plcp_err);

        statis.beacon_silence_rssi_a =
                        le32_to_cpu(rx_info->beacon_silence_rssi_a);
        statis.beacon_silence_rssi_b =
                        le32_to_cpu(rx_info->beacon_silence_rssi_b);
        statis.beacon_silence_rssi_c =
                        le32_to_cpu(rx_info->beacon_silence_rssi_c);
        statis.beacon_energy_a =
                        le32_to_cpu(rx_info->beacon_energy_a);
        statis.beacon_energy_b =
                        le32_to_cpu(rx_info->beacon_energy_b);
        statis.beacon_energy_c =
                        le32_to_cpu(rx_info->beacon_energy_c);

        spin_unlock_bh(&priv->statistics.lock);

        IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);

        if (!rx_enable_time) {
                IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n");
                return;
        }

        /* These statistics increase monotonically, and do not reset
         *   at each beacon.  Calculate difference from last value, or just
         *   use the new statistics value if it has reset or wrapped around. */
        if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
                data->last_bad_plcp_cnt_cck = bad_plcp_cck;
        else {
                bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
                data->last_bad_plcp_cnt_cck += bad_plcp_cck;
        }

        if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
                data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
        else {
                bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
                data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
        }

        if (data->last_fa_cnt_ofdm > fa_ofdm)
                data->last_fa_cnt_ofdm = fa_ofdm;
        else {
                fa_ofdm -= data->last_fa_cnt_ofdm;
                data->last_fa_cnt_ofdm += fa_ofdm;
        }

        if (data->last_fa_cnt_cck > fa_cck)
                data->last_fa_cnt_cck = fa_cck;
        else {
                fa_cck -= data->last_fa_cnt_cck;
                data->last_fa_cnt_cck += fa_cck;
        }

        /* Total aborted signal locks */
        norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
        norm_fa_cck = fa_cck + bad_plcp_cck;

        IWL_DEBUG_CALIB(priv, "cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
                        bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);

        iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
        iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
        if (priv->fw->enhance_sensitivity_table)
                iwl_enhance_sensitivity_write(priv);
        else
                iwl_sensitivity_write(priv);
}

static inline u8 find_first_chain(u8 mask)
{
        if (mask & ANT_A)
                return CHAIN_A;
        if (mask & ANT_B)
                return CHAIN_B;
        return CHAIN_C;
}

/**
 * Run disconnected antenna algorithm to find out which antennas are
 * disconnected.
 */
static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
                                     struct iwl_chain_noise_data *data)
{
        u32 active_chains = 0;
        u32 max_average_sig;
        u16 max_average_sig_antenna_i;
        u8 num_tx_chains;
        u8 first_chain;
        u16 i = 0;

        average_sig[0] = data->chain_signal_a / IWL_CAL_NUM_BEACONS;
        average_sig[1] = data->chain_signal_b / IWL_CAL_NUM_BEACONS;
        average_sig[2] = data->chain_signal_c / IWL_CAL_NUM_BEACONS;

        if (average_sig[0] >= average_sig[1]) {
                max_average_sig = average_sig[0];
                max_average_sig_antenna_i = 0;
                active_chains = (1 << max_average_sig_antenna_i);
        } else {
                max_average_sig = average_sig[1];
                max_average_sig_antenna_i = 1;
                active_chains = (1 << max_average_sig_antenna_i);
        }

        if (average_sig[2] >= max_average_sig) {
                max_average_sig = average_sig[2];
                max_average_sig_antenna_i = 2;
                active_chains = (1 << max_average_sig_antenna_i);
        }

        IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n",
                     average_sig[0], average_sig[1], average_sig[2]);
        IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n",
                     max_average_sig, max_average_sig_antenna_i);

        /* Compare signal strengths for all 3 receivers. */
        for (i = 0; i < NUM_RX_CHAINS; i++) {
                if (i != max_average_sig_antenna_i) {
                        s32 rssi_delta = (max_average_sig - average_sig[i]);

                        /* If signal is very weak, compared with
                         * strongest, mark it as disconnected. */
                        if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
                                data->disconn_array[i] = 1;
                        else
                                active_chains |= (1 << i);
                        IWL_DEBUG_CALIB(priv, "i = %d  rssiDelta = %d  "
                             "disconn_array[i] = %d\n",
                             i, rssi_delta, data->disconn_array[i]);
                }
        }

        /*
         * The above algorithm sometimes fails when the ucode
         * reports 0 for all chains. It's not clear why that
         * happens to start with, but it is then causing trouble
         * because this can make us enable more chains than the
         * hardware really has.
         *
         * To be safe, simply mask out any chains that we know
         * are not on the device.
         */
        active_chains &= priv->nvm_data->valid_rx_ant;

        num_tx_chains = 0;
        for (i = 0; i < NUM_RX_CHAINS; i++) {
                /* loops on all the bits of
                 * priv->hw_setting.valid_tx_ant */
                u8 ant_msk = (1 << i);
                if (!(priv->nvm_data->valid_tx_ant & ant_msk))
                        continue;

                num_tx_chains++;
                if (data->disconn_array[i] == 0)
                        /* there is a Tx antenna connected */
                        break;
                if (num_tx_chains == priv->hw_params.tx_chains_num &&
                    data->disconn_array[i]) {
                        /*
                         * If all chains are disconnected
                         * connect the first valid tx chain
                         */
                        first_chain =
                                find_first_chain(priv->nvm_data->valid_tx_ant);
                        data->disconn_array[first_chain] = 0;
                        active_chains |= BIT(first_chain);
                        IWL_DEBUG_CALIB(priv,
                                        "All Tx chains are disconnected W/A - declare %d as connected\n",
                                        first_chain);
                        break;
                }
        }

        if (active_chains != priv->nvm_data->valid_rx_ant &&
            active_chains != priv->chain_noise_data.active_chains)
                IWL_DEBUG_CALIB(priv,
                                "Detected that not all antennas are connected! "
                                "Connected: %#x, valid: %#x.\n",
                                active_chains,
                                priv->nvm_data->valid_rx_ant);

        /* Save for use within RXON, TX, SCAN commands, etc. */
        data->active_chains = active_chains;
        IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n",
                        active_chains);
}

static void iwlagn_gain_computation(struct iwl_priv *priv,
                                    u32 average_noise[NUM_RX_CHAINS],
                                    u8 default_chain)
{
        int i;
        s32 delta_g;
        struct iwl_chain_noise_data *data = &priv->chain_noise_data;

        /*
         * Find Gain Code for the chains based on "default chain"
         */
        for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) {
                if ((data->disconn_array[i])) {
                        data->delta_gain_code[i] = 0;
                        continue;
                }

                delta_g = (priv->lib->chain_noise_scale *
                        ((s32)average_noise[default_chain] -
                        (s32)average_noise[i])) / 1500;

                /* bound gain by 2 bits value max, 3rd bit is sign */
                data->delta_gain_code[i] =
                        min(abs(delta_g),
                        (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);

                if (delta_g < 0)
                        /*
                         * set negative sign ...
                         * note to Intel developers:  This is uCode API format,
                         *   not the format of any internal device registers.
                         *   Do not change this format for e.g. 6050 or similar
                         *   devices.  Change format only if more resolution
                         *   (i.e. more than 2 bits magnitude) is needed.
                         */
                        data->delta_gain_code[i] |= (1 << 2);
        }

        IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d  ANT_C = %d\n",
                        data->delta_gain_code[1], data->delta_gain_code[2]);

        if (!data->radio_write) {
                struct iwl_calib_chain_noise_gain_cmd cmd;

                memset(&cmd, 0, sizeof(cmd));

                iwl_set_calib_hdr(&cmd.hdr,
                        priv->phy_calib_chain_noise_gain_cmd);
                cmd.delta_gain_1 = data->delta_gain_code[1];
                cmd.delta_gain_2 = data->delta_gain_code[2];
                iwl_dvm_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
                        CMD_ASYNC, sizeof(cmd), &cmd);

                data->radio_write = 1;
                data->state = IWL_CHAIN_NOISE_CALIBRATED;
        }
}

/*
 * Accumulate 16 beacons of signal and noise statistics for each of
 *   3 receivers/antennas/rx-chains, then figure out:
 * 1)  Which antennas are connected.
 * 2)  Differential rx gain settings to balance the 3 receivers.
 */
void iwl_chain_noise_calibration(struct iwl_priv *priv)
{
        struct iwl_chain_noise_data *data = NULL;

        u32 chain_noise_a;
        u32 chain_noise_b;
        u32 chain_noise_c;
        u32 chain_sig_a;
        u32 chain_sig_b;
        u32 chain_sig_c;
        u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
        u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
        u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
        u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
        u16 i = 0;
        u16 rxon_chnum = INITIALIZATION_VALUE;
        u16 stat_chnum = INITIALIZATION_VALUE;
        u8 rxon_band24;
        u8 stat_band24;
        struct statistics_rx_non_phy *rx_info;

        /*
         * MULTI-FIXME:
         * When we support multiple interfaces on different channels,
         * this must be modified/fixed.
         */
        struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];

        if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED)
                return;

        data = &(priv->chain_noise_data);

        /*
         * Accumulate just the first "chain_noise_num_beacons" after
         * the first association, then we're done forever.
         */
        if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
                if (data->state == IWL_CHAIN_NOISE_ALIVE)
                        IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
                return;
        }

        spin_lock_bh(&priv->statistics.lock);

        rx_info = &priv->statistics.rx_non_phy;

        if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
                IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n");
                spin_unlock_bh(&priv->statistics.lock);
                return;
        }

        rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
        rxon_chnum = le16_to_cpu(ctx->staging.channel);
        stat_band24 =

                !!(priv->statistics.flag & STATISTICS_REPLY_FLG_BAND_24G_MSK);
        stat_chnum = le32_to_cpu(priv->statistics.flag) >> 16;

        /* Make sure we accumulate data for just the associated channel
         *   (even if scanning). */
        if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
                IWL_DEBUG_CALIB(priv, "Stats not from chan=%d, band24=%d\n",
                                rxon_chnum, rxon_band24);
                spin_unlock_bh(&priv->statistics.lock);
                return;
        }

        /*
         *  Accumulate beacon statistics values across
         * "chain_noise_num_beacons"
         */
        chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
                                IN_BAND_FILTER;
        chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
                                IN_BAND_FILTER;
        chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
                                IN_BAND_FILTER;

        chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
        chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
        chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;

        spin_unlock_bh(&priv->statistics.lock);

        data->beacon_count++;

        data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
        data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
        data->chain_noise_c = (chain_noise_c + data->chain_noise_c);

        data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
        data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
        data->chain_signal_c = (chain_sig_c + data->chain_signal_c);

        IWL_DEBUG_CALIB(priv, "chan=%d, band24=%d, beacon=%d\n",
                        rxon_chnum, rxon_band24, data->beacon_count);
        IWL_DEBUG_CALIB(priv, "chain_sig: a %d b %d c %d\n",
                        chain_sig_a, chain_sig_b, chain_sig_c);
        IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
                        chain_noise_a, chain_noise_b, chain_noise_c);

        /* If this is the "chain_noise_num_beacons", determine:
         * 1)  Disconnected antennas (using signal strengths)
         * 2)  Differential gain (using silence noise) to balance receivers */
        if (data->beacon_count != IWL_CAL_NUM_BEACONS)
                return;

        /* Analyze signal for disconnected antenna */
        if (priv->lib->bt_params &&
            priv->lib->bt_params->advanced_bt_coexist) {
                /* Disable disconnected antenna algorithm for advanced
                   bt coex, assuming valid antennas are connected */
                data->active_chains = priv->nvm_data->valid_rx_ant;
                for (i = 0; i < NUM_RX_CHAINS; i++)
                        if (!(data->active_chains & (1<<i)))
                                data->disconn_array[i] = 1;
        } else
                iwl_find_disconn_antenna(priv, average_sig, data);

        /* Analyze noise for rx balance */
        average_noise[0] = data->chain_noise_a / IWL_CAL_NUM_BEACONS;
        average_noise[1] = data->chain_noise_b / IWL_CAL_NUM_BEACONS;
        average_noise[2] = data->chain_noise_c / IWL_CAL_NUM_BEACONS;

        for (i = 0; i < NUM_RX_CHAINS; i++) {
                if (!(data->disconn_array[i]) &&
                   (average_noise[i] <= min_average_noise)) {
                        /* This means that chain i is active and has
                         * lower noise values so far: */
                        min_average_noise = average_noise[i];
                        min_average_noise_antenna_i = i;
                }
        }

        IWL_DEBUG_CALIB(priv, "average_noise: a %d b %d c %d\n",
                        average_noise[0], average_noise[1],
                        average_noise[2]);

        IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n",
                        min_average_noise, min_average_noise_antenna_i);

        iwlagn_gain_computation(
                priv, average_noise,
                find_first_chain(priv->nvm_data->valid_rx_ant));

        /* Some power changes may have been made during the calibration.
         * Update and commit the RXON
         */
        iwl_update_chain_flags(priv);

        data->state = IWL_CHAIN_NOISE_DONE;
        iwl_power_update_mode(priv, false);
}

void iwl_reset_run_time_calib(struct iwl_priv *priv)
{
        int i;
        memset(&(priv->sensitivity_data), 0,
               sizeof(struct iwl_sensitivity_data));
        memset(&(priv->chain_noise_data), 0,
               sizeof(struct iwl_chain_noise_data));
        for (i = 0; i < NUM_RX_CHAINS; i++)
                priv->chain_noise_data.delta_gain_code[i] =
                                CHAIN_NOISE_DELTA_GAIN_INIT_VAL;

        /* Ask for statistics now, the uCode will send notification
         * periodically after association */
        iwl_send_statistics_request(priv, CMD_ASYNC, true);
}