linux/drivers/pinctrl/pinctrl-bcm2835.c
<<
>>
Prefs
   1/*
   2 * Driver for Broadcom BCM2835 GPIO unit (pinctrl + GPIO)
   3 *
   4 * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren
   5 *
   6 * This driver is inspired by:
   7 * pinctrl-nomadik.c, please see original file for copyright information
   8 * pinctrl-tegra.c, please see original file for copyright information
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License as published by
  12 * the Free Software Foundation; either version 2 of the License, or
  13 * (at your option) any later version.
  14 *
  15 * This program is distributed in the hope that it will be useful,
  16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 * GNU General Public License for more details.
  19 */
  20
  21#include <linux/bitmap.h>
  22#include <linux/bug.h>
  23#include <linux/delay.h>
  24#include <linux/device.h>
  25#include <linux/err.h>
  26#include <linux/gpio.h>
  27#include <linux/interrupt.h>
  28#include <linux/io.h>
  29#include <linux/irq.h>
  30#include <linux/irqdesc.h>
  31#include <linux/irqdomain.h>
  32#include <linux/module.h>
  33#include <linux/of_address.h>
  34#include <linux/of.h>
  35#include <linux/of_irq.h>
  36#include <linux/pinctrl/consumer.h>
  37#include <linux/pinctrl/machine.h>
  38#include <linux/pinctrl/pinconf.h>
  39#include <linux/pinctrl/pinctrl.h>
  40#include <linux/pinctrl/pinmux.h>
  41#include <linux/platform_device.h>
  42#include <linux/seq_file.h>
  43#include <linux/slab.h>
  44#include <linux/spinlock.h>
  45#include <linux/types.h>
  46
  47#define MODULE_NAME "pinctrl-bcm2835"
  48#define BCM2835_NUM_GPIOS 54
  49#define BCM2835_NUM_BANKS 2
  50
  51#define BCM2835_PIN_BITMAP_SZ \
  52        DIV_ROUND_UP(BCM2835_NUM_GPIOS, sizeof(unsigned long) * 8)
  53
  54/* GPIO register offsets */
  55#define GPFSEL0         0x0     /* Function Select */
  56#define GPSET0          0x1c    /* Pin Output Set */
  57#define GPCLR0          0x28    /* Pin Output Clear */
  58#define GPLEV0          0x34    /* Pin Level */
  59#define GPEDS0          0x40    /* Pin Event Detect Status */
  60#define GPREN0          0x4c    /* Pin Rising Edge Detect Enable */
  61#define GPFEN0          0x58    /* Pin Falling Edge Detect Enable */
  62#define GPHEN0          0x64    /* Pin High Detect Enable */
  63#define GPLEN0          0x70    /* Pin Low Detect Enable */
  64#define GPAREN0         0x7c    /* Pin Async Rising Edge Detect */
  65#define GPAFEN0         0x88    /* Pin Async Falling Edge Detect */
  66#define GPPUD           0x94    /* Pin Pull-up/down Enable */
  67#define GPPUDCLK0       0x98    /* Pin Pull-up/down Enable Clock */
  68
  69#define FSEL_REG(p)             (GPFSEL0 + (((p) / 10) * 4))
  70#define FSEL_SHIFT(p)           (((p) % 10) * 3)
  71#define GPIO_REG_OFFSET(p)      ((p) / 32)
  72#define GPIO_REG_SHIFT(p)       ((p) % 32)
  73
  74enum bcm2835_pinconf_param {
  75        /* argument: bcm2835_pinconf_pull */
  76        BCM2835_PINCONF_PARAM_PULL,
  77};
  78
  79enum bcm2835_pinconf_pull {
  80        BCM2835_PINCONFIG_PULL_NONE,
  81        BCM2835_PINCONFIG_PULL_DOWN,
  82        BCM2835_PINCONFIG_PULL_UP,
  83};
  84
  85#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
  86#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
  87#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
  88
  89struct bcm2835_gpio_irqdata {
  90        struct bcm2835_pinctrl *pc;
  91        int bank;
  92};
  93
  94struct bcm2835_pinctrl {
  95        struct device *dev;
  96        void __iomem *base;
  97        int irq[BCM2835_NUM_BANKS];
  98
  99        /* note: locking assumes each bank will have its own unsigned long */
 100        unsigned long enabled_irq_map[BCM2835_NUM_BANKS];
 101        unsigned int irq_type[BCM2835_NUM_GPIOS];
 102
 103        struct pinctrl_dev *pctl_dev;
 104        struct irq_domain *irq_domain;
 105        struct gpio_chip gpio_chip;
 106        struct pinctrl_gpio_range gpio_range;
 107
 108        struct bcm2835_gpio_irqdata irq_data[BCM2835_NUM_BANKS];
 109        spinlock_t irq_lock[BCM2835_NUM_BANKS];
 110};
 111
 112static struct lock_class_key gpio_lock_class;
 113
 114/* pins are just named GPIO0..GPIO53 */
 115#define BCM2835_GPIO_PIN(a) PINCTRL_PIN(a, "gpio" #a)
 116static struct pinctrl_pin_desc bcm2835_gpio_pins[] = {
 117        BCM2835_GPIO_PIN(0),
 118        BCM2835_GPIO_PIN(1),
 119        BCM2835_GPIO_PIN(2),
 120        BCM2835_GPIO_PIN(3),
 121        BCM2835_GPIO_PIN(4),
 122        BCM2835_GPIO_PIN(5),
 123        BCM2835_GPIO_PIN(6),
 124        BCM2835_GPIO_PIN(7),
 125        BCM2835_GPIO_PIN(8),
 126        BCM2835_GPIO_PIN(9),
 127        BCM2835_GPIO_PIN(10),
 128        BCM2835_GPIO_PIN(11),
 129        BCM2835_GPIO_PIN(12),
 130        BCM2835_GPIO_PIN(13),
 131        BCM2835_GPIO_PIN(14),
 132        BCM2835_GPIO_PIN(15),
 133        BCM2835_GPIO_PIN(16),
 134        BCM2835_GPIO_PIN(17),
 135        BCM2835_GPIO_PIN(18),
 136        BCM2835_GPIO_PIN(19),
 137        BCM2835_GPIO_PIN(20),
 138        BCM2835_GPIO_PIN(21),
 139        BCM2835_GPIO_PIN(22),
 140        BCM2835_GPIO_PIN(23),
 141        BCM2835_GPIO_PIN(24),
 142        BCM2835_GPIO_PIN(25),
 143        BCM2835_GPIO_PIN(26),
 144        BCM2835_GPIO_PIN(27),
 145        BCM2835_GPIO_PIN(28),
 146        BCM2835_GPIO_PIN(29),
 147        BCM2835_GPIO_PIN(30),
 148        BCM2835_GPIO_PIN(31),
 149        BCM2835_GPIO_PIN(32),
 150        BCM2835_GPIO_PIN(33),
 151        BCM2835_GPIO_PIN(34),
 152        BCM2835_GPIO_PIN(35),
 153        BCM2835_GPIO_PIN(36),
 154        BCM2835_GPIO_PIN(37),
 155        BCM2835_GPIO_PIN(38),
 156        BCM2835_GPIO_PIN(39),
 157        BCM2835_GPIO_PIN(40),
 158        BCM2835_GPIO_PIN(41),
 159        BCM2835_GPIO_PIN(42),
 160        BCM2835_GPIO_PIN(43),
 161        BCM2835_GPIO_PIN(44),
 162        BCM2835_GPIO_PIN(45),
 163        BCM2835_GPIO_PIN(46),
 164        BCM2835_GPIO_PIN(47),
 165        BCM2835_GPIO_PIN(48),
 166        BCM2835_GPIO_PIN(49),
 167        BCM2835_GPIO_PIN(50),
 168        BCM2835_GPIO_PIN(51),
 169        BCM2835_GPIO_PIN(52),
 170        BCM2835_GPIO_PIN(53),
 171};
 172
 173/* one pin per group */
 174static const char * const bcm2835_gpio_groups[] = {
 175        "gpio0",
 176        "gpio1",
 177        "gpio2",
 178        "gpio3",
 179        "gpio4",
 180        "gpio5",
 181        "gpio6",
 182        "gpio7",
 183        "gpio8",
 184        "gpio9",
 185        "gpio10",
 186        "gpio11",
 187        "gpio12",
 188        "gpio13",
 189        "gpio14",
 190        "gpio15",
 191        "gpio16",
 192        "gpio17",
 193        "gpio18",
 194        "gpio19",
 195        "gpio20",
 196        "gpio21",
 197        "gpio22",
 198        "gpio23",
 199        "gpio24",
 200        "gpio25",
 201        "gpio26",
 202        "gpio27",
 203        "gpio28",
 204        "gpio29",
 205        "gpio30",
 206        "gpio31",
 207        "gpio32",
 208        "gpio33",
 209        "gpio34",
 210        "gpio35",
 211        "gpio36",
 212        "gpio37",
 213        "gpio38",
 214        "gpio39",
 215        "gpio40",
 216        "gpio41",
 217        "gpio42",
 218        "gpio43",
 219        "gpio44",
 220        "gpio45",
 221        "gpio46",
 222        "gpio47",
 223        "gpio48",
 224        "gpio49",
 225        "gpio50",
 226        "gpio51",
 227        "gpio52",
 228        "gpio53",
 229};
 230
 231enum bcm2835_fsel {
 232        BCM2835_FSEL_GPIO_IN = 0,
 233        BCM2835_FSEL_GPIO_OUT = 1,
 234        BCM2835_FSEL_ALT0 = 4,
 235        BCM2835_FSEL_ALT1 = 5,
 236        BCM2835_FSEL_ALT2 = 6,
 237        BCM2835_FSEL_ALT3 = 7,
 238        BCM2835_FSEL_ALT4 = 3,
 239        BCM2835_FSEL_ALT5 = 2,
 240        BCM2835_FSEL_COUNT = 8,
 241        BCM2835_FSEL_MASK = 0x7,
 242};
 243
 244static const char * const bcm2835_functions[BCM2835_FSEL_COUNT] = {
 245        [BCM2835_FSEL_GPIO_IN] = "gpio_in",
 246        [BCM2835_FSEL_GPIO_OUT] = "gpio_out",
 247        [BCM2835_FSEL_ALT0] = "alt0",
 248        [BCM2835_FSEL_ALT1] = "alt1",
 249        [BCM2835_FSEL_ALT2] = "alt2",
 250        [BCM2835_FSEL_ALT3] = "alt3",
 251        [BCM2835_FSEL_ALT4] = "alt4",
 252        [BCM2835_FSEL_ALT5] = "alt5",
 253};
 254
 255static const char * const irq_type_names[] = {
 256        [IRQ_TYPE_NONE] = "none",
 257        [IRQ_TYPE_EDGE_RISING] = "edge-rising",
 258        [IRQ_TYPE_EDGE_FALLING] = "edge-falling",
 259        [IRQ_TYPE_EDGE_BOTH] = "edge-both",
 260        [IRQ_TYPE_LEVEL_HIGH] = "level-high",
 261        [IRQ_TYPE_LEVEL_LOW] = "level-low",
 262};
 263
 264static inline u32 bcm2835_gpio_rd(struct bcm2835_pinctrl *pc, unsigned reg)
 265{
 266        return readl(pc->base + reg);
 267}
 268
 269static inline void bcm2835_gpio_wr(struct bcm2835_pinctrl *pc, unsigned reg,
 270                u32 val)
 271{
 272        writel(val, pc->base + reg);
 273}
 274
 275static inline int bcm2835_gpio_get_bit(struct bcm2835_pinctrl *pc, unsigned reg,
 276                unsigned bit)
 277{
 278        reg += GPIO_REG_OFFSET(bit) * 4;
 279        return (bcm2835_gpio_rd(pc, reg) >> GPIO_REG_SHIFT(bit)) & 1;
 280}
 281
 282/* note NOT a read/modify/write cycle */
 283static inline void bcm2835_gpio_set_bit(struct bcm2835_pinctrl *pc,
 284                unsigned reg, unsigned bit)
 285{
 286        reg += GPIO_REG_OFFSET(bit) * 4;
 287        bcm2835_gpio_wr(pc, reg, BIT(GPIO_REG_SHIFT(bit)));
 288}
 289
 290static inline enum bcm2835_fsel bcm2835_pinctrl_fsel_get(
 291                struct bcm2835_pinctrl *pc, unsigned pin)
 292{
 293        u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
 294        enum bcm2835_fsel status = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
 295
 296        dev_dbg(pc->dev, "get %08x (%u => %s)\n", val, pin,
 297                        bcm2835_functions[status]);
 298
 299        return status;
 300}
 301
 302static inline void bcm2835_pinctrl_fsel_set(
 303                struct bcm2835_pinctrl *pc, unsigned pin,
 304                enum bcm2835_fsel fsel)
 305{
 306        u32 val = bcm2835_gpio_rd(pc, FSEL_REG(pin));
 307        enum bcm2835_fsel cur = (val >> FSEL_SHIFT(pin)) & BCM2835_FSEL_MASK;
 308
 309        dev_dbg(pc->dev, "read %08x (%u => %s)\n", val, pin,
 310                        bcm2835_functions[cur]);
 311
 312        if (cur == fsel)
 313                return;
 314
 315        if (cur != BCM2835_FSEL_GPIO_IN && fsel != BCM2835_FSEL_GPIO_IN) {
 316                /* always transition through GPIO_IN */
 317                val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
 318                val |= BCM2835_FSEL_GPIO_IN << FSEL_SHIFT(pin);
 319
 320                dev_dbg(pc->dev, "trans %08x (%u <= %s)\n", val, pin,
 321                                bcm2835_functions[BCM2835_FSEL_GPIO_IN]);
 322                bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
 323        }
 324
 325        val &= ~(BCM2835_FSEL_MASK << FSEL_SHIFT(pin));
 326        val |= fsel << FSEL_SHIFT(pin);
 327
 328        dev_dbg(pc->dev, "write %08x (%u <= %s)\n", val, pin,
 329                        bcm2835_functions[fsel]);
 330        bcm2835_gpio_wr(pc, FSEL_REG(pin), val);
 331}
 332
 333static int bcm2835_gpio_request(struct gpio_chip *chip, unsigned offset)
 334{
 335        return pinctrl_request_gpio(chip->base + offset);
 336}
 337
 338static void bcm2835_gpio_free(struct gpio_chip *chip, unsigned offset)
 339{
 340        pinctrl_free_gpio(chip->base + offset);
 341}
 342
 343static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 344{
 345        return pinctrl_gpio_direction_input(chip->base + offset);
 346}
 347
 348static int bcm2835_gpio_get(struct gpio_chip *chip, unsigned offset)
 349{
 350        struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
 351
 352        return bcm2835_gpio_get_bit(pc, GPLEV0, offset);
 353}
 354
 355static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
 356                unsigned offset, int value)
 357{
 358        return pinctrl_gpio_direction_output(chip->base + offset);
 359}
 360
 361static void bcm2835_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 362{
 363        struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
 364
 365        bcm2835_gpio_set_bit(pc, value ? GPSET0 : GPCLR0, offset);
 366}
 367
 368static int bcm2835_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 369{
 370        struct bcm2835_pinctrl *pc = dev_get_drvdata(chip->dev);
 371
 372        return irq_linear_revmap(pc->irq_domain, offset);
 373}
 374
 375static struct gpio_chip bcm2835_gpio_chip = {
 376        .label = MODULE_NAME,
 377        .owner = THIS_MODULE,
 378        .request = bcm2835_gpio_request,
 379        .free = bcm2835_gpio_free,
 380        .direction_input = bcm2835_gpio_direction_input,
 381        .direction_output = bcm2835_gpio_direction_output,
 382        .get = bcm2835_gpio_get,
 383        .set = bcm2835_gpio_set,
 384        .to_irq = bcm2835_gpio_to_irq,
 385        .base = -1,
 386        .ngpio = BCM2835_NUM_GPIOS,
 387        .can_sleep = 0,
 388};
 389
 390static irqreturn_t bcm2835_gpio_irq_handler(int irq, void *dev_id)
 391{
 392        struct bcm2835_gpio_irqdata *irqdata = dev_id;
 393        struct bcm2835_pinctrl *pc = irqdata->pc;
 394        int bank = irqdata->bank;
 395        unsigned long events;
 396        unsigned offset;
 397        unsigned gpio;
 398        unsigned int type;
 399
 400        events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
 401        events &= pc->enabled_irq_map[bank];
 402        for_each_set_bit(offset, &events, 32) {
 403                gpio = (32 * bank) + offset;
 404                type = pc->irq_type[gpio];
 405
 406                /* ack edge triggered IRQs immediately */
 407                if (!(type & IRQ_TYPE_LEVEL_MASK))
 408                        bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
 409
 410                generic_handle_irq(irq_linear_revmap(pc->irq_domain, gpio));
 411
 412                /* ack level triggered IRQ after handling them */
 413                if (type & IRQ_TYPE_LEVEL_MASK)
 414                        bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
 415        }
 416        return events ? IRQ_HANDLED : IRQ_NONE;
 417}
 418
 419static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
 420        unsigned reg, unsigned offset, bool enable)
 421{
 422        u32 value;
 423        reg += GPIO_REG_OFFSET(offset) * 4;
 424        value = bcm2835_gpio_rd(pc, reg);
 425        if (enable)
 426                value |= BIT(GPIO_REG_SHIFT(offset));
 427        else
 428                value &= ~(BIT(GPIO_REG_SHIFT(offset)));
 429        bcm2835_gpio_wr(pc, reg, value);
 430}
 431
 432/* fast path for IRQ handler */
 433static void bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc,
 434        unsigned offset, bool enable)
 435{
 436        switch (pc->irq_type[offset]) {
 437        case IRQ_TYPE_EDGE_RISING:
 438                __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
 439                break;
 440
 441        case IRQ_TYPE_EDGE_FALLING:
 442                __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
 443                break;
 444
 445        case IRQ_TYPE_EDGE_BOTH:
 446                __bcm2835_gpio_irq_config(pc, GPREN0, offset, enable);
 447                __bcm2835_gpio_irq_config(pc, GPFEN0, offset, enable);
 448                break;
 449
 450        case IRQ_TYPE_LEVEL_HIGH:
 451                __bcm2835_gpio_irq_config(pc, GPHEN0, offset, enable);
 452                break;
 453
 454        case IRQ_TYPE_LEVEL_LOW:
 455                __bcm2835_gpio_irq_config(pc, GPLEN0, offset, enable);
 456                break;
 457        }
 458}
 459
 460static void bcm2835_gpio_irq_enable(struct irq_data *data)
 461{
 462        struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
 463        unsigned gpio = irqd_to_hwirq(data);
 464        unsigned offset = GPIO_REG_SHIFT(gpio);
 465        unsigned bank = GPIO_REG_OFFSET(gpio);
 466        unsigned long flags;
 467
 468        spin_lock_irqsave(&pc->irq_lock[bank], flags);
 469        set_bit(offset, &pc->enabled_irq_map[bank]);
 470        bcm2835_gpio_irq_config(pc, gpio, true);
 471        spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
 472}
 473
 474static void bcm2835_gpio_irq_disable(struct irq_data *data)
 475{
 476        struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
 477        unsigned gpio = irqd_to_hwirq(data);
 478        unsigned offset = GPIO_REG_SHIFT(gpio);
 479        unsigned bank = GPIO_REG_OFFSET(gpio);
 480        unsigned long flags;
 481
 482        spin_lock_irqsave(&pc->irq_lock[bank], flags);
 483        bcm2835_gpio_irq_config(pc, gpio, false);
 484        clear_bit(offset, &pc->enabled_irq_map[bank]);
 485        spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
 486}
 487
 488static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
 489        unsigned offset, unsigned int type)
 490{
 491        switch (type) {
 492        case IRQ_TYPE_NONE:
 493        case IRQ_TYPE_EDGE_RISING:
 494        case IRQ_TYPE_EDGE_FALLING:
 495        case IRQ_TYPE_EDGE_BOTH:
 496        case IRQ_TYPE_LEVEL_HIGH:
 497        case IRQ_TYPE_LEVEL_LOW:
 498                pc->irq_type[offset] = type;
 499                break;
 500
 501        default:
 502                return -EINVAL;
 503        }
 504        return 0;
 505}
 506
 507/* slower path for reconfiguring IRQ type */
 508static int __bcm2835_gpio_irq_set_type_enabled(struct bcm2835_pinctrl *pc,
 509        unsigned offset, unsigned int type)
 510{
 511        switch (type) {
 512        case IRQ_TYPE_NONE:
 513                if (pc->irq_type[offset] != type) {
 514                        bcm2835_gpio_irq_config(pc, offset, false);
 515                        pc->irq_type[offset] = type;
 516                }
 517                break;
 518
 519        case IRQ_TYPE_EDGE_RISING:
 520                if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
 521                        /* RISING already enabled, disable FALLING */
 522                        pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
 523                        bcm2835_gpio_irq_config(pc, offset, false);
 524                        pc->irq_type[offset] = type;
 525                } else if (pc->irq_type[offset] != type) {
 526                        bcm2835_gpio_irq_config(pc, offset, false);
 527                        pc->irq_type[offset] = type;
 528                        bcm2835_gpio_irq_config(pc, offset, true);
 529                }
 530                break;
 531
 532        case IRQ_TYPE_EDGE_FALLING:
 533                if (pc->irq_type[offset] == IRQ_TYPE_EDGE_BOTH) {
 534                        /* FALLING already enabled, disable RISING */
 535                        pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
 536                        bcm2835_gpio_irq_config(pc, offset, false);
 537                        pc->irq_type[offset] = type;
 538                } else if (pc->irq_type[offset] != type) {
 539                        bcm2835_gpio_irq_config(pc, offset, false);
 540                        pc->irq_type[offset] = type;
 541                        bcm2835_gpio_irq_config(pc, offset, true);
 542                }
 543                break;
 544
 545        case IRQ_TYPE_EDGE_BOTH:
 546                if (pc->irq_type[offset] == IRQ_TYPE_EDGE_RISING) {
 547                        /* RISING already enabled, enable FALLING too */
 548                        pc->irq_type[offset] = IRQ_TYPE_EDGE_FALLING;
 549                        bcm2835_gpio_irq_config(pc, offset, true);
 550                        pc->irq_type[offset] = type;
 551                } else if (pc->irq_type[offset] == IRQ_TYPE_EDGE_FALLING) {
 552                        /* FALLING already enabled, enable RISING too */
 553                        pc->irq_type[offset] = IRQ_TYPE_EDGE_RISING;
 554                        bcm2835_gpio_irq_config(pc, offset, true);
 555                        pc->irq_type[offset] = type;
 556                } else if (pc->irq_type[offset] != type) {
 557                        bcm2835_gpio_irq_config(pc, offset, false);
 558                        pc->irq_type[offset] = type;
 559                        bcm2835_gpio_irq_config(pc, offset, true);
 560                }
 561                break;
 562
 563        case IRQ_TYPE_LEVEL_HIGH:
 564        case IRQ_TYPE_LEVEL_LOW:
 565                if (pc->irq_type[offset] != type) {
 566                        bcm2835_gpio_irq_config(pc, offset, false);
 567                        pc->irq_type[offset] = type;
 568                        bcm2835_gpio_irq_config(pc, offset, true);
 569                }
 570                break;
 571
 572        default:
 573                return -EINVAL;
 574        }
 575        return 0;
 576}
 577
 578static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
 579{
 580        struct bcm2835_pinctrl *pc = irq_data_get_irq_chip_data(data);
 581        unsigned gpio = irqd_to_hwirq(data);
 582        unsigned offset = GPIO_REG_SHIFT(gpio);
 583        unsigned bank = GPIO_REG_OFFSET(gpio);
 584        unsigned long flags;
 585        int ret;
 586
 587        spin_lock_irqsave(&pc->irq_lock[bank], flags);
 588
 589        if (test_bit(offset, &pc->enabled_irq_map[bank]))
 590                ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
 591        else
 592                ret = __bcm2835_gpio_irq_set_type_disabled(pc, gpio, type);
 593
 594        spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
 595
 596        return ret;
 597}
 598
 599static struct irq_chip bcm2835_gpio_irq_chip = {
 600        .name = MODULE_NAME,
 601        .irq_enable = bcm2835_gpio_irq_enable,
 602        .irq_disable = bcm2835_gpio_irq_disable,
 603        .irq_set_type = bcm2835_gpio_irq_set_type,
 604};
 605
 606static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev)
 607{
 608        return ARRAY_SIZE(bcm2835_gpio_groups);
 609}
 610
 611static const char *bcm2835_pctl_get_group_name(struct pinctrl_dev *pctldev,
 612                unsigned selector)
 613{
 614        return bcm2835_gpio_groups[selector];
 615}
 616
 617static int bcm2835_pctl_get_group_pins(struct pinctrl_dev *pctldev,
 618                unsigned selector,
 619                const unsigned **pins,
 620                unsigned *num_pins)
 621{
 622        *pins = &bcm2835_gpio_pins[selector].number;
 623        *num_pins = 1;
 624
 625        return 0;
 626}
 627
 628static void bcm2835_pctl_pin_dbg_show(struct pinctrl_dev *pctldev,
 629                struct seq_file *s,
 630                unsigned offset)
 631{
 632        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 633        enum bcm2835_fsel fsel = bcm2835_pinctrl_fsel_get(pc, offset);
 634        const char *fname = bcm2835_functions[fsel];
 635        int value = bcm2835_gpio_get_bit(pc, GPLEV0, offset);
 636        int irq = irq_find_mapping(pc->irq_domain, offset);
 637
 638        seq_printf(s, "function %s in %s; irq %d (%s)",
 639                fname, value ? "hi" : "lo",
 640                irq, irq_type_names[pc->irq_type[offset]]);
 641}
 642
 643static void bcm2835_pctl_dt_free_map(struct pinctrl_dev *pctldev,
 644                struct pinctrl_map *maps, unsigned num_maps)
 645{
 646        int i;
 647
 648        for (i = 0; i < num_maps; i++)
 649                if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
 650                        kfree(maps[i].data.configs.configs);
 651
 652        kfree(maps);
 653}
 654
 655static int bcm2835_pctl_dt_node_to_map_func(struct bcm2835_pinctrl *pc,
 656                struct device_node *np, u32 pin, u32 fnum,
 657                struct pinctrl_map **maps)
 658{
 659        struct pinctrl_map *map = *maps;
 660
 661        if (fnum >= ARRAY_SIZE(bcm2835_functions)) {
 662                dev_err(pc->dev, "%s: invalid brcm,function %d\n",
 663                        of_node_full_name(np), fnum);
 664                return -EINVAL;
 665        }
 666
 667        map->type = PIN_MAP_TYPE_MUX_GROUP;
 668        map->data.mux.group = bcm2835_gpio_groups[pin];
 669        map->data.mux.function = bcm2835_functions[fnum];
 670        (*maps)++;
 671
 672        return 0;
 673}
 674
 675static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
 676                struct device_node *np, u32 pin, u32 pull,
 677                struct pinctrl_map **maps)
 678{
 679        struct pinctrl_map *map = *maps;
 680        unsigned long *configs;
 681
 682        if (pull > 2) {
 683                dev_err(pc->dev, "%s: invalid brcm,pull %d\n",
 684                        of_node_full_name(np), pull);
 685                return -EINVAL;
 686        }
 687
 688        configs = kzalloc(sizeof(*configs), GFP_KERNEL);
 689        if (!configs)
 690                return -ENOMEM;
 691        configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull);
 692
 693        map->type = PIN_MAP_TYPE_CONFIGS_PIN;
 694        map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
 695        map->data.configs.configs = configs;
 696        map->data.configs.num_configs = 1;
 697        (*maps)++;
 698
 699        return 0;
 700}
 701
 702static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 703                struct device_node *np,
 704                struct pinctrl_map **map, unsigned *num_maps)
 705{
 706        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 707        struct property *pins, *funcs, *pulls;
 708        int num_pins, num_funcs, num_pulls, maps_per_pin;
 709        struct pinctrl_map *maps, *cur_map;
 710        int i, err;
 711        u32 pin, func, pull;
 712
 713        pins = of_find_property(np, "brcm,pins", NULL);
 714        if (!pins) {
 715                dev_err(pc->dev, "%s: missing brcm,pins property\n",
 716                                of_node_full_name(np));
 717                return -EINVAL;
 718        }
 719
 720        funcs = of_find_property(np, "brcm,function", NULL);
 721        pulls = of_find_property(np, "brcm,pull", NULL);
 722
 723        if (!funcs && !pulls) {
 724                dev_err(pc->dev,
 725                        "%s: neither brcm,function nor brcm,pull specified\n",
 726                        of_node_full_name(np));
 727                return -EINVAL;
 728        }
 729
 730        num_pins = pins->length / 4;
 731        num_funcs = funcs ? (funcs->length / 4) : 0;
 732        num_pulls = pulls ? (pulls->length / 4) : 0;
 733
 734        if (num_funcs > 1 && num_funcs != num_pins) {
 735                dev_err(pc->dev,
 736                        "%s: brcm,function must have 1 or %d entries\n",
 737                        of_node_full_name(np), num_pins);
 738                return -EINVAL;
 739        }
 740
 741        if (num_pulls > 1 && num_pulls != num_pins) {
 742                dev_err(pc->dev,
 743                        "%s: brcm,pull must have 1 or %d entries\n",
 744                        of_node_full_name(np), num_pins);
 745                return -EINVAL;
 746        }
 747
 748        maps_per_pin = 0;
 749        if (num_funcs)
 750                maps_per_pin++;
 751        if (num_pulls)
 752                maps_per_pin++;
 753        cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
 754                                GFP_KERNEL);
 755        if (!maps)
 756                return -ENOMEM;
 757
 758        for (i = 0; i < num_pins; i++) {
 759                err = of_property_read_u32_index(np, "brcm,pins", i, &pin);
 760                if (err)
 761                        goto out;
 762                if (pin >= ARRAY_SIZE(bcm2835_gpio_pins)) {
 763                        dev_err(pc->dev, "%s: invalid brcm,pins value %d\n",
 764                                of_node_full_name(np), pin);
 765                        err = -EINVAL;
 766                        goto out;
 767                }
 768
 769                if (num_funcs) {
 770                        err = of_property_read_u32_index(np, "brcm,function",
 771                                        (num_funcs > 1) ? i : 0, &func);
 772                        if (err)
 773                                goto out;
 774                        err = bcm2835_pctl_dt_node_to_map_func(pc, np, pin,
 775                                                        func, &cur_map);
 776                        if (err)
 777                                goto out;
 778                }
 779                if (num_pulls) {
 780                        err = of_property_read_u32_index(np, "brcm,pull",
 781                                        (num_funcs > 1) ? i : 0, &pull);
 782                        if (err)
 783                                goto out;
 784                        err = bcm2835_pctl_dt_node_to_map_pull(pc, np, pin,
 785                                                        pull, &cur_map);
 786                        if (err)
 787                                goto out;
 788                }
 789        }
 790
 791        *map = maps;
 792        *num_maps = num_pins * maps_per_pin;
 793
 794        return 0;
 795
 796out:
 797        kfree(maps);
 798        return err;
 799}
 800
 801static const struct pinctrl_ops bcm2835_pctl_ops = {
 802        .get_groups_count = bcm2835_pctl_get_groups_count,
 803        .get_group_name = bcm2835_pctl_get_group_name,
 804        .get_group_pins = bcm2835_pctl_get_group_pins,
 805        .pin_dbg_show = bcm2835_pctl_pin_dbg_show,
 806        .dt_node_to_map = bcm2835_pctl_dt_node_to_map,
 807        .dt_free_map = bcm2835_pctl_dt_free_map,
 808};
 809
 810static int bcm2835_pmx_get_functions_count(struct pinctrl_dev *pctldev)
 811{
 812        return BCM2835_FSEL_COUNT;
 813}
 814
 815static const char *bcm2835_pmx_get_function_name(struct pinctrl_dev *pctldev,
 816                unsigned selector)
 817{
 818        return bcm2835_functions[selector];
 819}
 820
 821static int bcm2835_pmx_get_function_groups(struct pinctrl_dev *pctldev,
 822                unsigned selector,
 823                const char * const **groups,
 824                unsigned * const num_groups)
 825{
 826        /* every pin can do every function */
 827        *groups = bcm2835_gpio_groups;
 828        *num_groups = ARRAY_SIZE(bcm2835_gpio_groups);
 829
 830        return 0;
 831}
 832
 833static int bcm2835_pmx_enable(struct pinctrl_dev *pctldev,
 834                unsigned func_selector,
 835                unsigned group_selector)
 836{
 837        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 838
 839        bcm2835_pinctrl_fsel_set(pc, group_selector, func_selector);
 840
 841        return 0;
 842}
 843
 844static void bcm2835_pmx_disable(struct pinctrl_dev *pctldev,
 845                unsigned func_selector,
 846                unsigned group_selector)
 847{
 848        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 849
 850        /* disable by setting to GPIO_IN */
 851        bcm2835_pinctrl_fsel_set(pc, group_selector, BCM2835_FSEL_GPIO_IN);
 852}
 853
 854static void bcm2835_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
 855                struct pinctrl_gpio_range *range,
 856                unsigned offset)
 857{
 858        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 859
 860        /* disable by setting to GPIO_IN */
 861        bcm2835_pinctrl_fsel_set(pc, offset, BCM2835_FSEL_GPIO_IN);
 862}
 863
 864static int bcm2835_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 865                struct pinctrl_gpio_range *range,
 866                unsigned offset,
 867                bool input)
 868{
 869        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 870        enum bcm2835_fsel fsel = input ?
 871                BCM2835_FSEL_GPIO_IN : BCM2835_FSEL_GPIO_OUT;
 872
 873        bcm2835_pinctrl_fsel_set(pc, offset, fsel);
 874
 875        return 0;
 876}
 877
 878static const struct pinmux_ops bcm2835_pmx_ops = {
 879        .get_functions_count = bcm2835_pmx_get_functions_count,
 880        .get_function_name = bcm2835_pmx_get_function_name,
 881        .get_function_groups = bcm2835_pmx_get_function_groups,
 882        .enable = bcm2835_pmx_enable,
 883        .disable = bcm2835_pmx_disable,
 884        .gpio_disable_free = bcm2835_pmx_gpio_disable_free,
 885        .gpio_set_direction = bcm2835_pmx_gpio_set_direction,
 886};
 887
 888static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev,
 889                        unsigned pin, unsigned long *config)
 890{
 891        /* No way to read back config in HW */
 892        return -ENOTSUPP;
 893}
 894
 895static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
 896                        unsigned pin, unsigned long config)
 897{
 898        struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
 899        enum bcm2835_pinconf_param param = BCM2835_PINCONF_UNPACK_PARAM(config);
 900        u16 arg = BCM2835_PINCONF_UNPACK_ARG(config);
 901        u32 off, bit;
 902
 903        if (param != BCM2835_PINCONF_PARAM_PULL)
 904                return -EINVAL;
 905
 906        off = GPIO_REG_OFFSET(pin);
 907        bit = GPIO_REG_SHIFT(pin);
 908
 909        bcm2835_gpio_wr(pc, GPPUD, arg & 3);
 910        /*
 911         * Docs say to wait 150 cycles, but not of what. We assume a
 912         * 1 MHz clock here, which is pretty slow...
 913         */
 914        udelay(150);
 915        bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
 916        udelay(150);
 917        bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
 918
 919        return 0;
 920}
 921
 922static const struct pinconf_ops bcm2835_pinconf_ops = {
 923        .pin_config_get = bcm2835_pinconf_get,
 924        .pin_config_set = bcm2835_pinconf_set,
 925};
 926
 927static struct pinctrl_desc bcm2835_pinctrl_desc = {
 928        .name = MODULE_NAME,
 929        .pins = bcm2835_gpio_pins,
 930        .npins = ARRAY_SIZE(bcm2835_gpio_pins),
 931        .pctlops = &bcm2835_pctl_ops,
 932        .pmxops = &bcm2835_pmx_ops,
 933        .confops = &bcm2835_pinconf_ops,
 934        .owner = THIS_MODULE,
 935};
 936
 937static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
 938        .name = MODULE_NAME,
 939        .npins = BCM2835_NUM_GPIOS,
 940};
 941
 942static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 943{
 944        struct device *dev = &pdev->dev;
 945        struct device_node *np = dev->of_node;
 946        struct bcm2835_pinctrl *pc;
 947        struct resource iomem;
 948        int err, i;
 949        BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
 950        BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
 951
 952        pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
 953        if (!pc)
 954                return -ENOMEM;
 955
 956        platform_set_drvdata(pdev, pc);
 957        pc->dev = dev;
 958
 959        err = of_address_to_resource(np, 0, &iomem);
 960        if (err) {
 961                dev_err(dev, "could not get IO memory\n");
 962                return err;
 963        }
 964
 965        pc->base = devm_ioremap_resource(dev, &iomem);
 966        if (IS_ERR(pc->base))
 967                return PTR_ERR(pc->base);
 968
 969        pc->gpio_chip = bcm2835_gpio_chip;
 970        pc->gpio_chip.dev = dev;
 971        pc->gpio_chip.of_node = np;
 972
 973        pc->irq_domain = irq_domain_add_linear(np, BCM2835_NUM_GPIOS,
 974                        &irq_domain_simple_ops, NULL);
 975        if (!pc->irq_domain) {
 976                dev_err(dev, "could not create IRQ domain\n");
 977                return -ENOMEM;
 978        }
 979
 980        for (i = 0; i < BCM2835_NUM_GPIOS; i++) {
 981                int irq = irq_create_mapping(pc->irq_domain, i);
 982                irq_set_lockdep_class(irq, &gpio_lock_class);
 983                irq_set_chip_and_handler(irq, &bcm2835_gpio_irq_chip,
 984                                handle_simple_irq);
 985                irq_set_chip_data(irq, pc);
 986                set_irq_flags(irq, IRQF_VALID);
 987        }
 988
 989        for (i = 0; i < BCM2835_NUM_BANKS; i++) {
 990                unsigned long events;
 991                unsigned offset;
 992                int len;
 993                char *name;
 994
 995                /* clear event detection flags */
 996                bcm2835_gpio_wr(pc, GPREN0 + i * 4, 0);
 997                bcm2835_gpio_wr(pc, GPFEN0 + i * 4, 0);
 998                bcm2835_gpio_wr(pc, GPHEN0 + i * 4, 0);
 999                bcm2835_gpio_wr(pc, GPLEN0 + i * 4, 0);
1000                bcm2835_gpio_wr(pc, GPAREN0 + i * 4, 0);
1001                bcm2835_gpio_wr(pc, GPAFEN0 + i * 4, 0);
1002
1003                /* clear all the events */
1004                events = bcm2835_gpio_rd(pc, GPEDS0 + i * 4);
1005                for_each_set_bit(offset, &events, 32)
1006                        bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
1007
1008                pc->irq[i] = irq_of_parse_and_map(np, i);
1009                pc->irq_data[i].pc = pc;
1010                pc->irq_data[i].bank = i;
1011                spin_lock_init(&pc->irq_lock[i]);
1012
1013                len = strlen(dev_name(pc->dev)) + 16;
1014                name = devm_kzalloc(pc->dev, len, GFP_KERNEL);
1015                if (!name)
1016                        return -ENOMEM;
1017                snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i);
1018
1019                err = devm_request_irq(dev, pc->irq[i],
1020                        bcm2835_gpio_irq_handler, IRQF_SHARED,
1021                        name, &pc->irq_data[i]);
1022                if (err) {
1023                        dev_err(dev, "unable to request IRQ %d\n", pc->irq[i]);
1024                        return err;
1025                }
1026        }
1027
1028        err = gpiochip_add(&pc->gpio_chip);
1029        if (err) {
1030                dev_err(dev, "could not add GPIO chip\n");
1031                return err;
1032        }
1033
1034        pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc);
1035        if (!pc->pctl_dev) {
1036                gpiochip_remove(&pc->gpio_chip);
1037                return -EINVAL;
1038        }
1039
1040        pc->gpio_range = bcm2835_pinctrl_gpio_range;
1041        pc->gpio_range.base = pc->gpio_chip.base;
1042        pc->gpio_range.gc = &pc->gpio_chip;
1043        pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
1044
1045        return 0;
1046}
1047
1048static int bcm2835_pinctrl_remove(struct platform_device *pdev)
1049{
1050        struct bcm2835_pinctrl *pc = platform_get_drvdata(pdev);
1051
1052        pinctrl_unregister(pc->pctl_dev);
1053        gpiochip_remove(&pc->gpio_chip);
1054
1055        return 0;
1056}
1057
1058static struct of_device_id bcm2835_pinctrl_match[] = {
1059        { .compatible = "brcm,bcm2835-gpio" },
1060        {}
1061};
1062MODULE_DEVICE_TABLE(of, bcm2835_pinctrl_match);
1063
1064static struct platform_driver bcm2835_pinctrl_driver = {
1065        .probe = bcm2835_pinctrl_probe,
1066        .remove = bcm2835_pinctrl_remove,
1067        .driver = {
1068                .name = MODULE_NAME,
1069                .owner = THIS_MODULE,
1070                .of_match_table = bcm2835_pinctrl_match,
1071        },
1072};
1073module_platform_driver(bcm2835_pinctrl_driver);
1074
1075MODULE_AUTHOR("Chris Boot, Simon Arlott, Stephen Warren");
1076MODULE_DESCRIPTION("BCM2835 Pin control driver");
1077MODULE_LICENSE("GPL");
1078