1
2
3
4
5
6
7
8
9
10#include <linux/module.h>
11#include <linux/blkdev.h>
12#include <linux/kernel.h>
13#include <linux/string.h>
14#include <linux/ioport.h>
15#include <linux/proc_fs.h>
16#include <linux/delay.h>
17#include <linux/interrupt.h>
18#include <linux/init.h>
19#include <linux/dma-mapping.h>
20
21#include <asm/dma.h>
22#include <asm/ecard.h>
23#include <asm/io.h>
24#include <asm/pgtable.h>
25
26#include "../scsi.h"
27#include <scsi/scsi_host.h>
28#include "fas216.h"
29#include "scsi.h"
30
31#include <scsi/scsicam.h>
32
33#define POWERTEC_FAS216_OFFSET 0x3000
34#define POWERTEC_FAS216_SHIFT 6
35
36#define POWERTEC_INTR_STATUS 0x2000
37#define POWERTEC_INTR_BIT 0x80
38
39#define POWERTEC_RESET_CONTROL 0x1018
40#define POWERTEC_RESET_BIT 1
41
42#define POWERTEC_TERM_CONTROL 0x2018
43#define POWERTEC_TERM_ENABLE 1
44
45#define POWERTEC_INTR_CONTROL 0x101c
46#define POWERTEC_INTR_ENABLE 1
47#define POWERTEC_INTR_DISABLE 0
48
49#define VERSION "1.10 (19/01/2003 2.5.59)"
50
51
52
53
54
55static int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 };
56
57#define NR_SG 256
58
59struct powertec_info {
60 FAS216_Info info;
61 struct expansion_card *ec;
62 void __iomem *base;
63 unsigned int term_ctl;
64 struct scatterlist sg[NR_SG];
65};
66
67
68
69
70
71
72static void
73powertecscsi_irqenable(struct expansion_card *ec, int irqnr)
74{
75 struct powertec_info *info = ec->irq_data;
76 writeb(POWERTEC_INTR_ENABLE, info->base + POWERTEC_INTR_CONTROL);
77}
78
79
80
81
82
83
84static void
85powertecscsi_irqdisable(struct expansion_card *ec, int irqnr)
86{
87 struct powertec_info *info = ec->irq_data;
88 writeb(POWERTEC_INTR_DISABLE, info->base + POWERTEC_INTR_CONTROL);
89}
90
91static const expansioncard_ops_t powertecscsi_ops = {
92 .irqenable = powertecscsi_irqenable,
93 .irqdisable = powertecscsi_irqdisable,
94};
95
96
97
98
99
100
101static void
102powertecscsi_terminator_ctl(struct Scsi_Host *host, int on_off)
103{
104 struct powertec_info *info = (struct powertec_info *)host->hostdata;
105
106 info->term_ctl = on_off ? POWERTEC_TERM_ENABLE : 0;
107 writeb(info->term_ctl, info->base + POWERTEC_TERM_CONTROL);
108}
109
110
111
112
113
114
115static irqreturn_t powertecscsi_intr(int irq, void *dev_id)
116{
117 struct powertec_info *info = dev_id;
118
119 return fas216_intr(&info->info);
120}
121
122
123
124
125
126
127
128
129
130static fasdmatype_t
131powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
132 fasdmadir_t direction, fasdmatype_t min_type)
133{
134 struct powertec_info *info = (struct powertec_info *)host->hostdata;
135 struct device *dev = scsi_get_device(host);
136 int dmach = info->info.scsi.dma;
137
138 if (info->info.ifcfg.capabilities & FASCAP_DMA &&
139 min_type == fasdma_real_all) {
140 int bufs, map_dir, dma_dir;
141
142 bufs = copy_SCp_to_sg(&info->sg[0], SCp, NR_SG);
143
144 if (direction == DMA_OUT)
145 map_dir = DMA_TO_DEVICE,
146 dma_dir = DMA_MODE_WRITE;
147 else
148 map_dir = DMA_FROM_DEVICE,
149 dma_dir = DMA_MODE_READ;
150
151 dma_map_sg(dev, info->sg, bufs, map_dir);
152
153 disable_dma(dmach);
154 set_dma_sg(dmach, info->sg, bufs);
155 set_dma_mode(dmach, dma_dir);
156 enable_dma(dmach);
157 return fasdma_real_all;
158 }
159
160
161
162
163
164 return fasdma_pio;
165}
166
167
168
169
170
171
172static void
173powertecscsi_dma_stop(struct Scsi_Host *host, struct scsi_pointer *SCp)
174{
175 struct powertec_info *info = (struct powertec_info *)host->hostdata;
176 if (info->info.scsi.dma != NO_DMA)
177 disable_dma(info->info.scsi.dma);
178}
179
180
181
182
183
184
185const char *powertecscsi_info(struct Scsi_Host *host)
186{
187 struct powertec_info *info = (struct powertec_info *)host->hostdata;
188 static char string[150];
189
190 sprintf(string, "%s (%s) in slot %d v%s terminators o%s",
191 host->hostt->name, info->info.scsi.type, info->ec->slot_no,
192 VERSION, info->term_ctl ? "n" : "ff");
193
194 return string;
195}
196
197
198
199
200
201
202
203
204static int
205powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
206{
207 int ret = length;
208
209 if (length >= 12 && strncmp(buffer, "POWERTECSCSI", 12) == 0) {
210 buffer += 12;
211 length -= 12;
212
213 if (length >= 5 && strncmp(buffer, "term=", 5) == 0) {
214 if (buffer[5] == '1')
215 powertecscsi_terminator_ctl(host, 1);
216 else if (buffer[5] == '0')
217 powertecscsi_terminator_ctl(host, 0);
218 else
219 ret = -EINVAL;
220 } else
221 ret = -EINVAL;
222 } else
223 ret = -EINVAL;
224
225 return ret;
226}
227
228
229
230
231
232
233
234
235
236
237
238
239
240static int powertecscsi_show_info(struct seq_file *m, struct Scsi_Host *host)
241{
242 struct powertec_info *info;
243
244 info = (struct powertec_info *)host->hostdata;
245
246 seq_printf(m, "PowerTec SCSI driver v%s\n", VERSION);
247 fas216_print_host(&info->info, m);
248 seq_printf(m, "Term : o%s\n",
249 info->term_ctl ? "n" : "ff");
250
251 fas216_print_stats(&info->info, m);
252 fas216_print_devices(&info->info, m);
253 return 0;
254}
255
256static ssize_t powertecscsi_show_term(struct device *dev, struct device_attribute *attr, char *buf)
257{
258 struct expansion_card *ec = ECARD_DEV(dev);
259 struct Scsi_Host *host = ecard_get_drvdata(ec);
260 struct powertec_info *info = (struct powertec_info *)host->hostdata;
261
262 return sprintf(buf, "%d\n", info->term_ctl ? 1 : 0);
263}
264
265static ssize_t
266powertecscsi_store_term(struct device *dev, struct device_attribute *attr, const char *buf, size_t len)
267{
268 struct expansion_card *ec = ECARD_DEV(dev);
269 struct Scsi_Host *host = ecard_get_drvdata(ec);
270
271 if (len > 1)
272 powertecscsi_terminator_ctl(host, buf[0] != '0');
273
274 return len;
275}
276
277static DEVICE_ATTR(bus_term, S_IRUGO | S_IWUSR,
278 powertecscsi_show_term, powertecscsi_store_term);
279
280static struct scsi_host_template powertecscsi_template = {
281 .module = THIS_MODULE,
282 .show_info = powertecscsi_show_info,
283 .write_info = powertecscsi_set_proc_info,
284 .name = "PowerTec SCSI",
285 .info = powertecscsi_info,
286 .queuecommand = fas216_queue_command,
287 .eh_host_reset_handler = fas216_eh_host_reset,
288 .eh_bus_reset_handler = fas216_eh_bus_reset,
289 .eh_device_reset_handler = fas216_eh_device_reset,
290 .eh_abort_handler = fas216_eh_abort,
291
292 .can_queue = 8,
293 .this_id = 7,
294 .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
295 .dma_boundary = IOMD_DMA_BOUNDARY,
296 .cmd_per_lun = 2,
297 .use_clustering = ENABLE_CLUSTERING,
298 .proc_name = "powertec",
299};
300
301static int powertecscsi_probe(struct expansion_card *ec,
302 const struct ecard_id *id)
303{
304 struct Scsi_Host *host;
305 struct powertec_info *info;
306 void __iomem *base;
307 int ret;
308
309 ret = ecard_request_resources(ec);
310 if (ret)
311 goto out;
312
313 base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
314 if (!base) {
315 ret = -ENOMEM;
316 goto out_region;
317 }
318
319 host = scsi_host_alloc(&powertecscsi_template,
320 sizeof (struct powertec_info));
321 if (!host) {
322 ret = -ENOMEM;
323 goto out_region;
324 }
325
326 ecard_set_drvdata(ec, host);
327
328 info = (struct powertec_info *)host->hostdata;
329 info->base = base;
330 powertecscsi_terminator_ctl(host, term[ec->slot_no]);
331
332 info->ec = ec;
333 info->info.scsi.io_base = base + POWERTEC_FAS216_OFFSET;
334 info->info.scsi.io_shift = POWERTEC_FAS216_SHIFT;
335 info->info.scsi.irq = ec->irq;
336 info->info.scsi.dma = ec->dma;
337 info->info.ifcfg.clockrate = 40;
338 info->info.ifcfg.select_timeout = 255;
339 info->info.ifcfg.asyncperiod = 200;
340 info->info.ifcfg.sync_max_depth = 7;
341 info->info.ifcfg.cntl3 = CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK;
342 info->info.ifcfg.disconnect_ok = 1;
343 info->info.ifcfg.wide_max_size = 0;
344 info->info.ifcfg.capabilities = 0;
345 info->info.dma.setup = powertecscsi_dma_setup;
346 info->info.dma.pseudo = NULL;
347 info->info.dma.stop = powertecscsi_dma_stop;
348
349 ec->irqaddr = base + POWERTEC_INTR_STATUS;
350 ec->irqmask = POWERTEC_INTR_BIT;
351
352 ecard_setirq(ec, &powertecscsi_ops, info);
353
354 device_create_file(&ec->dev, &dev_attr_bus_term);
355
356 ret = fas216_init(host);
357 if (ret)
358 goto out_free;
359
360 ret = request_irq(ec->irq, powertecscsi_intr,
361 IRQF_DISABLED, "powertec", info);
362 if (ret) {
363 printk("scsi%d: IRQ%d not free: %d\n",
364 host->host_no, ec->irq, ret);
365 goto out_release;
366 }
367
368 if (info->info.scsi.dma != NO_DMA) {
369 if (request_dma(info->info.scsi.dma, "powertec")) {
370 printk("scsi%d: DMA%d not free, using PIO\n",
371 host->host_no, info->info.scsi.dma);
372 info->info.scsi.dma = NO_DMA;
373 } else {
374 set_dma_speed(info->info.scsi.dma, 180);
375 info->info.ifcfg.capabilities |= FASCAP_DMA;
376 }
377 }
378
379 ret = fas216_add(host, &ec->dev);
380 if (ret == 0)
381 goto out;
382
383 if (info->info.scsi.dma != NO_DMA)
384 free_dma(info->info.scsi.dma);
385 free_irq(ec->irq, host);
386
387 out_release:
388 fas216_release(host);
389
390 out_free:
391 device_remove_file(&ec->dev, &dev_attr_bus_term);
392 scsi_host_put(host);
393
394 out_region:
395 ecard_release_resources(ec);
396
397 out:
398 return ret;
399}
400
401static void powertecscsi_remove(struct expansion_card *ec)
402{
403 struct Scsi_Host *host = ecard_get_drvdata(ec);
404 struct powertec_info *info = (struct powertec_info *)host->hostdata;
405
406 ecard_set_drvdata(ec, NULL);
407 fas216_remove(host);
408
409 device_remove_file(&ec->dev, &dev_attr_bus_term);
410
411 if (info->info.scsi.dma != NO_DMA)
412 free_dma(info->info.scsi.dma);
413 free_irq(ec->irq, info);
414
415 fas216_release(host);
416 scsi_host_put(host);
417 ecard_release_resources(ec);
418}
419
420static const struct ecard_id powertecscsi_cids[] = {
421 { MANU_ALSYSTEMS, PROD_ALSYS_SCSIATAPI },
422 { 0xffff, 0xffff },
423};
424
425static struct ecard_driver powertecscsi_driver = {
426 .probe = powertecscsi_probe,
427 .remove = powertecscsi_remove,
428 .id_table = powertecscsi_cids,
429 .drv = {
430 .name = "powertecscsi",
431 },
432};
433
434static int __init powertecscsi_init(void)
435{
436 return ecard_register_driver(&powertecscsi_driver);
437}
438
439static void __exit powertecscsi_exit(void)
440{
441 ecard_remove_driver(&powertecscsi_driver);
442}
443
444module_init(powertecscsi_init);
445module_exit(powertecscsi_exit);
446
447MODULE_AUTHOR("Russell King");
448MODULE_DESCRIPTION("Powertec SCSI driver");
449module_param_array(term, int, NULL, 0);
450MODULE_PARM_DESC(term, "SCSI bus termination");
451MODULE_LICENSE("GPL");
452
