linux/drivers/scsi/libfc/fc_fcp.c
<<
>>
Prefs
   1/*
   2 * Copyright(c) 2007 Intel Corporation. All rights reserved.
   3 * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
   4 * Copyright(c) 2008 Mike Christie
   5 *
   6 * This program is free software; you can redistribute it and/or modify it
   7 * under the terms and conditions of the GNU General Public License,
   8 * version 2, as published by the Free Software Foundation.
   9 *
  10 * This program is distributed in the hope it will be useful, but WITHOUT
  11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13 * more details.
  14 *
  15 * You should have received a copy of the GNU General Public License along with
  16 * this program; if not, write to the Free Software Foundation, Inc.,
  17 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18 *
  19 * Maintained at www.Open-FCoE.org
  20 */
  21
  22#include <linux/module.h>
  23#include <linux/delay.h>
  24#include <linux/kernel.h>
  25#include <linux/types.h>
  26#include <linux/spinlock.h>
  27#include <linux/scatterlist.h>
  28#include <linux/err.h>
  29#include <linux/crc32.h>
  30#include <linux/slab.h>
  31
  32#include <scsi/scsi_tcq.h>
  33#include <scsi/scsi.h>
  34#include <scsi/scsi_host.h>
  35#include <scsi/scsi_device.h>
  36#include <scsi/scsi_cmnd.h>
  37
  38#include <scsi/fc/fc_fc2.h>
  39
  40#include <scsi/libfc.h>
  41#include <scsi/fc_encode.h>
  42
  43#include "fc_libfc.h"
  44
  45static struct kmem_cache *scsi_pkt_cachep;
  46
  47/* SRB state definitions */
  48#define FC_SRB_FREE             0               /* cmd is free */
  49#define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
  50#define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
  51#define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
  52#define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
  53#define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
  54#define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
  55#define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
  56
  57#define FC_SRB_READ             (1 << 1)
  58#define FC_SRB_WRITE            (1 << 0)
  59
  60/*
  61 * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
  62 */
  63#define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
  64#define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
  65#define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
  66#define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
  67#define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
  68
  69/**
  70 * struct fc_fcp_internal - FCP layer internal data
  71 * @scsi_pkt_pool: Memory pool to draw FCP packets from
  72 * @scsi_queue_lock: Protects the scsi_pkt_queue
  73 * @scsi_pkt_queue: Current FCP packets
  74 * @last_can_queue_ramp_down_time: ramp down time
  75 * @last_can_queue_ramp_up_time: ramp up time
  76 * @max_can_queue: max can_queue size
  77 */
  78struct fc_fcp_internal {
  79        mempool_t               *scsi_pkt_pool;
  80        spinlock_t              scsi_queue_lock;
  81        struct list_head        scsi_pkt_queue;
  82        unsigned long           last_can_queue_ramp_down_time;
  83        unsigned long           last_can_queue_ramp_up_time;
  84        int                     max_can_queue;
  85};
  86
  87#define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
  88
  89/*
  90 * function prototypes
  91 * FC scsi I/O related functions
  92 */
  93static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
  94static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
  95static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
  96static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
  97static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
  98static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
  99static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
 100static void fc_fcp_timeout(unsigned long);
 101static void fc_fcp_rec(struct fc_fcp_pkt *);
 102static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
 103static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
 104static void fc_io_compl(struct fc_fcp_pkt *);
 105
 106static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
 107static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
 108static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
 109
 110/*
 111 * command status codes
 112 */
 113#define FC_COMPLETE             0
 114#define FC_CMD_ABORTED          1
 115#define FC_CMD_RESET            2
 116#define FC_CMD_PLOGO            3
 117#define FC_SNS_RCV              4
 118#define FC_TRANS_ERR            5
 119#define FC_DATA_OVRRUN          6
 120#define FC_DATA_UNDRUN          7
 121#define FC_ERROR                8
 122#define FC_HRD_ERROR            9
 123#define FC_CRC_ERROR            10
 124#define FC_TIMED_OUT            11
 125
 126/*
 127 * Error recovery timeout values.
 128 */
 129#define FC_SCSI_TM_TOV          (10 * HZ)
 130#define FC_HOST_RESET_TIMEOUT   (30 * HZ)
 131#define FC_CAN_QUEUE_PERIOD     (60 * HZ)
 132
 133#define FC_MAX_ERROR_CNT        5
 134#define FC_MAX_RECOV_RETRY      3
 135
 136#define FC_FCP_DFLT_QUEUE_DEPTH 32
 137
 138/**
 139 * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
 140 * @lport: The local port that the FCP packet is for
 141 * @gfp:   GFP flags for allocation
 142 *
 143 * Return value: fcp_pkt structure or null on allocation failure.
 144 * Context:      Can be called from process context, no lock is required.
 145 */
 146static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
 147{
 148        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
 149        struct fc_fcp_pkt *fsp;
 150
 151        fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
 152        if (fsp) {
 153                memset(fsp, 0, sizeof(*fsp));
 154                fsp->lp = lport;
 155                fsp->xfer_ddp = FC_XID_UNKNOWN;
 156                atomic_set(&fsp->ref_cnt, 1);
 157                init_timer(&fsp->timer);
 158                fsp->timer.data = (unsigned long)fsp;
 159                INIT_LIST_HEAD(&fsp->list);
 160                spin_lock_init(&fsp->scsi_pkt_lock);
 161        } else {
 162                per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
 163                put_cpu();
 164        }
 165        return fsp;
 166}
 167
 168/**
 169 * fc_fcp_pkt_release() - Release hold on a fcp_pkt
 170 * @fsp: The FCP packet to be released
 171 *
 172 * Context: Can be called from process or interrupt context,
 173 *          no lock is required.
 174 */
 175static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
 176{
 177        if (atomic_dec_and_test(&fsp->ref_cnt)) {
 178                struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
 179
 180                mempool_free(fsp, si->scsi_pkt_pool);
 181        }
 182}
 183
 184/**
 185 * fc_fcp_pkt_hold() - Hold a fcp_pkt
 186 * @fsp: The FCP packet to be held
 187 */
 188static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
 189{
 190        atomic_inc(&fsp->ref_cnt);
 191}
 192
 193/**
 194 * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
 195 * @seq: The sequence that the FCP packet is on (required by destructor API)
 196 * @fsp: The FCP packet to be released
 197 *
 198 * This routine is called by a destructor callback in the exch_seq_send()
 199 * routine of the libfc Transport Template. The 'struct fc_seq' is a required
 200 * argument even though it is not used by this routine.
 201 *
 202 * Context: No locking required.
 203 */
 204static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
 205{
 206        fc_fcp_pkt_release(fsp);
 207}
 208
 209/**
 210 * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
 211 * @fsp: The FCP packet to be locked and incremented
 212 *
 213 * We should only return error if we return a command to SCSI-ml before
 214 * getting a response. This can happen in cases where we send a abort, but
 215 * do not wait for the response and the abort and command can be passing
 216 * each other on the wire/network-layer.
 217 *
 218 * Note: this function locks the packet and gets a reference to allow
 219 * callers to call the completion function while the lock is held and
 220 * not have to worry about the packets refcount.
 221 *
 222 * TODO: Maybe we should just have callers grab/release the lock and
 223 * have a function that they call to verify the fsp and grab a ref if
 224 * needed.
 225 */
 226static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
 227{
 228        spin_lock_bh(&fsp->scsi_pkt_lock);
 229        if (fsp->state & FC_SRB_COMPL) {
 230                spin_unlock_bh(&fsp->scsi_pkt_lock);
 231                return -EPERM;
 232        }
 233
 234        fc_fcp_pkt_hold(fsp);
 235        return 0;
 236}
 237
 238/**
 239 * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
 240 *                       reference count
 241 * @fsp: The FCP packet to be unlocked and decremented
 242 */
 243static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
 244{
 245        spin_unlock_bh(&fsp->scsi_pkt_lock);
 246        fc_fcp_pkt_release(fsp);
 247}
 248
 249/**
 250 * fc_fcp_timer_set() - Start a timer for a fcp_pkt
 251 * @fsp:   The FCP packet to start a timer for
 252 * @delay: The timeout period in jiffies
 253 */
 254static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
 255{
 256        if (!(fsp->state & FC_SRB_COMPL))
 257                mod_timer(&fsp->timer, jiffies + delay);
 258}
 259
 260/**
 261 * fc_fcp_send_abort() - Send an abort for exchanges associated with a
 262 *                       fcp_pkt
 263 * @fsp: The FCP packet to abort exchanges on
 264 */
 265static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
 266{
 267        if (!fsp->seq_ptr)
 268                return -EINVAL;
 269
 270        per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
 271        put_cpu();
 272
 273        fsp->state |= FC_SRB_ABORT_PENDING;
 274        return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
 275}
 276
 277/**
 278 * fc_fcp_retry_cmd() - Retry a fcp_pkt
 279 * @fsp: The FCP packet to be retried
 280 *
 281 * Sets the status code to be FC_ERROR and then calls
 282 * fc_fcp_complete_locked() which in turn calls fc_io_compl().
 283 * fc_io_compl() will notify the SCSI-ml that the I/O is done.
 284 * The SCSI-ml will retry the command.
 285 */
 286static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
 287{
 288        if (fsp->seq_ptr) {
 289                fsp->lp->tt.exch_done(fsp->seq_ptr);
 290                fsp->seq_ptr = NULL;
 291        }
 292
 293        fsp->state &= ~FC_SRB_ABORT_PENDING;
 294        fsp->io_status = 0;
 295        fsp->status_code = FC_ERROR;
 296        fc_fcp_complete_locked(fsp);
 297}
 298
 299/**
 300 * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
 301 * @fsp: The FCP packet that will manage the DDP frames
 302 * @xid: The XID that will be used for the DDP exchange
 303 */
 304void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
 305{
 306        struct fc_lport *lport;
 307
 308        lport = fsp->lp;
 309        if ((fsp->req_flags & FC_SRB_READ) &&
 310            (lport->lro_enabled) && (lport->tt.ddp_setup)) {
 311                if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
 312                                        scsi_sg_count(fsp->cmd)))
 313                        fsp->xfer_ddp = xid;
 314        }
 315}
 316
 317/**
 318 * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
 319 *                     DDP related resources for a fcp_pkt
 320 * @fsp: The FCP packet that DDP had been used on
 321 */
 322void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
 323{
 324        struct fc_lport *lport;
 325
 326        if (!fsp)
 327                return;
 328
 329        if (fsp->xfer_ddp == FC_XID_UNKNOWN)
 330                return;
 331
 332        lport = fsp->lp;
 333        if (lport->tt.ddp_done) {
 334                fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
 335                fsp->xfer_ddp = FC_XID_UNKNOWN;
 336        }
 337}
 338
 339/**
 340 * fc_fcp_can_queue_ramp_up() - increases can_queue
 341 * @lport: lport to ramp up can_queue
 342 */
 343static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
 344{
 345        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
 346        unsigned long flags;
 347        int can_queue;
 348
 349        spin_lock_irqsave(lport->host->host_lock, flags);
 350
 351        if (si->last_can_queue_ramp_up_time &&
 352            (time_before(jiffies, si->last_can_queue_ramp_up_time +
 353                         FC_CAN_QUEUE_PERIOD)))
 354                goto unlock;
 355
 356        if (time_before(jiffies, si->last_can_queue_ramp_down_time +
 357                        FC_CAN_QUEUE_PERIOD))
 358                goto unlock;
 359
 360        si->last_can_queue_ramp_up_time = jiffies;
 361
 362        can_queue = lport->host->can_queue << 1;
 363        if (can_queue >= si->max_can_queue) {
 364                can_queue = si->max_can_queue;
 365                si->last_can_queue_ramp_down_time = 0;
 366        }
 367        lport->host->can_queue = can_queue;
 368        shost_printk(KERN_ERR, lport->host, "libfc: increased "
 369                     "can_queue to %d.\n", can_queue);
 370
 371unlock:
 372        spin_unlock_irqrestore(lport->host->host_lock, flags);
 373}
 374
 375/**
 376 * fc_fcp_can_queue_ramp_down() - reduces can_queue
 377 * @lport: lport to reduce can_queue
 378 *
 379 * If we are getting memory allocation failures, then we may
 380 * be trying to execute too many commands. We let the running
 381 * commands complete or timeout, then try again with a reduced
 382 * can_queue. Eventually we will hit the point where we run
 383 * on all reserved structs.
 384 */
 385static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
 386{
 387        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
 388        unsigned long flags;
 389        int can_queue;
 390
 391        spin_lock_irqsave(lport->host->host_lock, flags);
 392
 393        if (si->last_can_queue_ramp_down_time &&
 394            (time_before(jiffies, si->last_can_queue_ramp_down_time +
 395                         FC_CAN_QUEUE_PERIOD)))
 396                goto unlock;
 397
 398        si->last_can_queue_ramp_down_time = jiffies;
 399
 400        can_queue = lport->host->can_queue;
 401        can_queue >>= 1;
 402        if (!can_queue)
 403                can_queue = 1;
 404        lport->host->can_queue = can_queue;
 405        shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
 406                     "Reducing can_queue to %d.\n", can_queue);
 407
 408unlock:
 409        spin_unlock_irqrestore(lport->host->host_lock, flags);
 410}
 411
 412/*
 413 * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
 414 * @lport:      fc lport struct
 415 * @len:        payload length
 416 *
 417 * Allocates fc_frame structure and buffer but if fails to allocate
 418 * then reduce can_queue.
 419 */
 420static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
 421                                                  size_t len)
 422{
 423        struct fc_frame *fp;
 424
 425        fp = fc_frame_alloc(lport, len);
 426        if (likely(fp))
 427                return fp;
 428
 429        per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
 430        put_cpu();
 431        /* error case */
 432        fc_fcp_can_queue_ramp_down(lport);
 433        return NULL;
 434}
 435
 436/**
 437 * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
 438 * @fsp: The FCP packet the data is on
 439 * @fp:  The data frame
 440 */
 441static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 442{
 443        struct scsi_cmnd *sc = fsp->cmd;
 444        struct fc_lport *lport = fsp->lp;
 445        struct fc_stats *stats;
 446        struct fc_frame_header *fh;
 447        size_t start_offset;
 448        size_t offset;
 449        u32 crc;
 450        u32 copy_len = 0;
 451        size_t len;
 452        void *buf;
 453        struct scatterlist *sg;
 454        u32 nents;
 455        u8 host_bcode = FC_COMPLETE;
 456
 457        fh = fc_frame_header_get(fp);
 458        offset = ntohl(fh->fh_parm_offset);
 459        start_offset = offset;
 460        len = fr_len(fp) - sizeof(*fh);
 461        buf = fc_frame_payload_get(fp, 0);
 462
 463        /*
 464         * if this I/O is ddped then clear it and initiate recovery since data
 465         * frames are expected to be placed directly in that case.
 466         *
 467         * Indicate error to scsi-ml because something went wrong with the
 468         * ddp handling to get us here.
 469         */
 470        if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
 471                fc_fcp_ddp_done(fsp);
 472                FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
 473                host_bcode = FC_ERROR;
 474                goto err;
 475        }
 476        if (offset + len > fsp->data_len) {
 477                /* this should never happen */
 478                if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
 479                    fc_frame_crc_check(fp))
 480                        goto crc_err;
 481                FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
 482                           "data_len %x\n", len, offset, fsp->data_len);
 483
 484                /* Data is corrupted indicate scsi-ml should retry */
 485                host_bcode = FC_DATA_OVRRUN;
 486                goto err;
 487        }
 488        if (offset != fsp->xfer_len)
 489                fsp->state |= FC_SRB_DISCONTIG;
 490
 491        sg = scsi_sglist(sc);
 492        nents = scsi_sg_count(sc);
 493
 494        if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
 495                copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
 496                                                    &offset, NULL);
 497        } else {
 498                crc = crc32(~0, (u8 *) fh, sizeof(*fh));
 499                copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
 500                                                    &offset, &crc);
 501                buf = fc_frame_payload_get(fp, 0);
 502                if (len % 4)
 503                        crc = crc32(crc, buf + len, 4 - (len % 4));
 504
 505                if (~crc != le32_to_cpu(fr_crc(fp))) {
 506crc_err:
 507                        stats = per_cpu_ptr(lport->stats, get_cpu());
 508                        stats->ErrorFrames++;
 509                        /* per cpu count, not total count, but OK for limit */
 510                        if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
 511                                printk(KERN_WARNING "libfc: CRC error on data "
 512                                       "frame for port (%6.6x)\n",
 513                                       lport->port_id);
 514                        put_cpu();
 515                        /*
 516                         * Assume the frame is total garbage.
 517                         * We may have copied it over the good part
 518                         * of the buffer.
 519                         * If so, we need to retry the entire operation.
 520                         * Otherwise, ignore it.
 521                         */
 522                        if (fsp->state & FC_SRB_DISCONTIG) {
 523                                host_bcode = FC_CRC_ERROR;
 524                                goto err;
 525                        }
 526                        return;
 527                }
 528        }
 529
 530        if (fsp->xfer_contig_end == start_offset)
 531                fsp->xfer_contig_end += copy_len;
 532        fsp->xfer_len += copy_len;
 533
 534        /*
 535         * In the very rare event that this data arrived after the response
 536         * and completes the transfer, call the completion handler.
 537         */
 538        if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
 539            fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
 540                fc_fcp_complete_locked(fsp);
 541        return;
 542err:
 543        fc_fcp_recovery(fsp, host_bcode);
 544}
 545
 546/**
 547 * fc_fcp_send_data() - Send SCSI data to a target
 548 * @fsp:      The FCP packet the data is on
 549 * @sp:       The sequence the data is to be sent on
 550 * @offset:   The starting offset for this data request
 551 * @seq_blen: The burst length for this data request
 552 *
 553 * Called after receiving a Transfer Ready data descriptor.
 554 * If the LLD is capable of sequence offload then send down the
 555 * seq_blen amount of data in single frame, otherwise send
 556 * multiple frames of the maximum frame payload supported by
 557 * the target port.
 558 */
 559static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
 560                            size_t offset, size_t seq_blen)
 561{
 562        struct fc_exch *ep;
 563        struct scsi_cmnd *sc;
 564        struct scatterlist *sg;
 565        struct fc_frame *fp = NULL;
 566        struct fc_lport *lport = fsp->lp;
 567        struct page *page;
 568        size_t remaining;
 569        size_t t_blen;
 570        size_t tlen;
 571        size_t sg_bytes;
 572        size_t frame_offset, fh_parm_offset;
 573        size_t off;
 574        int error;
 575        void *data = NULL;
 576        void *page_addr;
 577        int using_sg = lport->sg_supp;
 578        u32 f_ctl;
 579
 580        WARN_ON(seq_blen <= 0);
 581        if (unlikely(offset + seq_blen > fsp->data_len)) {
 582                /* this should never happen */
 583                FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
 584                           "offset %zx\n", seq_blen, offset);
 585                fc_fcp_send_abort(fsp);
 586                return 0;
 587        } else if (offset != fsp->xfer_len) {
 588                /* Out of Order Data Request - no problem, but unexpected. */
 589                FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
 590                           "seq_blen %zx offset %zx\n", seq_blen, offset);
 591        }
 592
 593        /*
 594         * if LLD is capable of seq_offload then set transport
 595         * burst length (t_blen) to seq_blen, otherwise set t_blen
 596         * to max FC frame payload previously set in fsp->max_payload.
 597         */
 598        t_blen = fsp->max_payload;
 599        if (lport->seq_offload) {
 600                t_blen = min(seq_blen, (size_t)lport->lso_max);
 601                FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
 602                           fsp, seq_blen, lport->lso_max, t_blen);
 603        }
 604
 605        if (t_blen > 512)
 606                t_blen &= ~(512 - 1);   /* round down to block size */
 607        sc = fsp->cmd;
 608
 609        remaining = seq_blen;
 610        fh_parm_offset = frame_offset = offset;
 611        tlen = 0;
 612        seq = lport->tt.seq_start_next(seq);
 613        f_ctl = FC_FC_REL_OFF;
 614        WARN_ON(!seq);
 615
 616        sg = scsi_sglist(sc);
 617
 618        while (remaining > 0 && sg) {
 619                if (offset >= sg->length) {
 620                        offset -= sg->length;
 621                        sg = sg_next(sg);
 622                        continue;
 623                }
 624                if (!fp) {
 625                        tlen = min(t_blen, remaining);
 626
 627                        /*
 628                         * TODO.  Temporary workaround.  fc_seq_send() can't
 629                         * handle odd lengths in non-linear skbs.
 630                         * This will be the final fragment only.
 631                         */
 632                        if (tlen % 4)
 633                                using_sg = 0;
 634                        fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
 635                        if (!fp)
 636                                return -ENOMEM;
 637
 638                        data = fc_frame_header_get(fp) + 1;
 639                        fh_parm_offset = frame_offset;
 640                        fr_max_payload(fp) = fsp->max_payload;
 641                }
 642
 643                off = offset + sg->offset;
 644                sg_bytes = min(tlen, sg->length - offset);
 645                sg_bytes = min(sg_bytes,
 646                               (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
 647                page = sg_page(sg) + (off >> PAGE_SHIFT);
 648                if (using_sg) {
 649                        get_page(page);
 650                        skb_fill_page_desc(fp_skb(fp),
 651                                           skb_shinfo(fp_skb(fp))->nr_frags,
 652                                           page, off & ~PAGE_MASK, sg_bytes);
 653                        fp_skb(fp)->data_len += sg_bytes;
 654                        fr_len(fp) += sg_bytes;
 655                        fp_skb(fp)->truesize += PAGE_SIZE;
 656                } else {
 657                        /*
 658                         * The scatterlist item may be bigger than PAGE_SIZE,
 659                         * but we must not cross pages inside the kmap.
 660                         */
 661                        page_addr = kmap_atomic(page);
 662                        memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
 663                               sg_bytes);
 664                        kunmap_atomic(page_addr);
 665                        data += sg_bytes;
 666                }
 667                offset += sg_bytes;
 668                frame_offset += sg_bytes;
 669                tlen -= sg_bytes;
 670                remaining -= sg_bytes;
 671
 672                if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
 673                    (tlen))
 674                        continue;
 675
 676                /*
 677                 * Send sequence with transfer sequence initiative in case
 678                 * this is last FCP frame of the sequence.
 679                 */
 680                if (remaining == 0)
 681                        f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
 682
 683                ep = fc_seq_exch(seq);
 684                fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
 685                               FC_TYPE_FCP, f_ctl, fh_parm_offset);
 686
 687                /*
 688                 * send fragment using for a sequence.
 689                 */
 690                error = lport->tt.seq_send(lport, seq, fp);
 691                if (error) {
 692                        WARN_ON(1);             /* send error should be rare */
 693                        return error;
 694                }
 695                fp = NULL;
 696        }
 697        fsp->xfer_len += seq_blen;      /* premature count? */
 698        return 0;
 699}
 700
 701/**
 702 * fc_fcp_abts_resp() - Receive an ABTS response
 703 * @fsp: The FCP packet that is being aborted
 704 * @fp:  The response frame
 705 */
 706static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 707{
 708        int ba_done = 1;
 709        struct fc_ba_rjt *brp;
 710        struct fc_frame_header *fh;
 711
 712        fh = fc_frame_header_get(fp);
 713        switch (fh->fh_r_ctl) {
 714        case FC_RCTL_BA_ACC:
 715                break;
 716        case FC_RCTL_BA_RJT:
 717                brp = fc_frame_payload_get(fp, sizeof(*brp));
 718                if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
 719                        break;
 720                /* fall thru */
 721        default:
 722                /*
 723                 * we will let the command timeout
 724                 * and scsi-ml recover in this case,
 725                 * therefore cleared the ba_done flag.
 726                 */
 727                ba_done = 0;
 728        }
 729
 730        if (ba_done) {
 731                fsp->state |= FC_SRB_ABORTED;
 732                fsp->state &= ~FC_SRB_ABORT_PENDING;
 733
 734                if (fsp->wait_for_comp)
 735                        complete(&fsp->tm_done);
 736                else
 737                        fc_fcp_complete_locked(fsp);
 738        }
 739}
 740
 741/**
 742 * fc_fcp_recv() - Receive an FCP frame
 743 * @seq: The sequence the frame is on
 744 * @fp:  The received frame
 745 * @arg: The related FCP packet
 746 *
 747 * Context: Called from Soft IRQ context. Can not be called
 748 *          holding the FCP packet list lock.
 749 */
 750static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 751{
 752        struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
 753        struct fc_lport *lport = fsp->lp;
 754        struct fc_frame_header *fh;
 755        struct fcp_txrdy *dd;
 756        u8 r_ctl;
 757        int rc = 0;
 758
 759        if (IS_ERR(fp)) {
 760                fc_fcp_error(fsp, fp);
 761                return;
 762        }
 763
 764        fh = fc_frame_header_get(fp);
 765        r_ctl = fh->fh_r_ctl;
 766
 767        if (lport->state != LPORT_ST_READY)
 768                goto out;
 769        if (fc_fcp_lock_pkt(fsp))
 770                goto out;
 771
 772        if (fh->fh_type == FC_TYPE_BLS) {
 773                fc_fcp_abts_resp(fsp, fp);
 774                goto unlock;
 775        }
 776
 777        if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
 778                goto unlock;
 779
 780        if (r_ctl == FC_RCTL_DD_DATA_DESC) {
 781                /*
 782                 * received XFER RDY from the target
 783                 * need to send data to the target
 784                 */
 785                WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
 786                dd = fc_frame_payload_get(fp, sizeof(*dd));
 787                WARN_ON(!dd);
 788
 789                rc = fc_fcp_send_data(fsp, seq,
 790                                      (size_t) ntohl(dd->ft_data_ro),
 791                                      (size_t) ntohl(dd->ft_burst_len));
 792                if (!rc)
 793                        seq->rec_data = fsp->xfer_len;
 794        } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
 795                /*
 796                 * received a DATA frame
 797                 * next we will copy the data to the system buffer
 798                 */
 799                WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
 800                fc_fcp_recv_data(fsp, fp);
 801                seq->rec_data = fsp->xfer_contig_end;
 802        } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
 803                WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
 804
 805                fc_fcp_resp(fsp, fp);
 806        } else {
 807                FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
 808        }
 809unlock:
 810        fc_fcp_unlock_pkt(fsp);
 811out:
 812        fc_frame_free(fp);
 813}
 814
 815/**
 816 * fc_fcp_resp() - Handler for FCP responses
 817 * @fsp: The FCP packet the response is for
 818 * @fp:  The response frame
 819 */
 820static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 821{
 822        struct fc_frame_header *fh;
 823        struct fcp_resp *fc_rp;
 824        struct fcp_resp_ext *rp_ex;
 825        struct fcp_resp_rsp_info *fc_rp_info;
 826        u32 plen;
 827        u32 expected_len;
 828        u32 respl = 0;
 829        u32 snsl = 0;
 830        u8 flags = 0;
 831
 832        plen = fr_len(fp);
 833        fh = (struct fc_frame_header *)fr_hdr(fp);
 834        if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
 835                goto len_err;
 836        plen -= sizeof(*fh);
 837        fc_rp = (struct fcp_resp *)(fh + 1);
 838        fsp->cdb_status = fc_rp->fr_status;
 839        flags = fc_rp->fr_flags;
 840        fsp->scsi_comp_flags = flags;
 841        expected_len = fsp->data_len;
 842
 843        /* if ddp, update xfer len */
 844        fc_fcp_ddp_done(fsp);
 845
 846        if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
 847                rp_ex = (void *)(fc_rp + 1);
 848                if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
 849                        if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
 850                                goto len_err;
 851                        fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
 852                        if (flags & FCP_RSP_LEN_VAL) {
 853                                respl = ntohl(rp_ex->fr_rsp_len);
 854                                if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
 855                                    (respl != FCP_RESP_RSP_INFO_LEN8))
 856                                        goto len_err;
 857                                if (fsp->wait_for_comp) {
 858                                        /* Abuse cdb_status for rsp code */
 859                                        fsp->cdb_status = fc_rp_info->rsp_code;
 860                                        complete(&fsp->tm_done);
 861                                        /*
 862                                         * tmfs will not have any scsi cmd so
 863                                         * exit here
 864                                         */
 865                                        return;
 866                                }
 867                        }
 868                        if (flags & FCP_SNS_LEN_VAL) {
 869                                snsl = ntohl(rp_ex->fr_sns_len);
 870                                if (snsl > SCSI_SENSE_BUFFERSIZE)
 871                                        snsl = SCSI_SENSE_BUFFERSIZE;
 872                                memcpy(fsp->cmd->sense_buffer,
 873                                       (char *)fc_rp_info + respl, snsl);
 874                        }
 875                }
 876                if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
 877                        if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
 878                                goto len_err;
 879                        if (flags & FCP_RESID_UNDER) {
 880                                fsp->scsi_resid = ntohl(rp_ex->fr_resid);
 881                                /*
 882                                 * The cmnd->underflow is the minimum number of
 883                                 * bytes that must be transferred for this
 884                                 * command.  Provided a sense condition is not
 885                                 * present, make sure the actual amount
 886                                 * transferred is at least the underflow value
 887                                 * or fail.
 888                                 */
 889                                if (!(flags & FCP_SNS_LEN_VAL) &&
 890                                    (fc_rp->fr_status == 0) &&
 891                                    (scsi_bufflen(fsp->cmd) -
 892                                     fsp->scsi_resid) < fsp->cmd->underflow)
 893                                        goto err;
 894                                expected_len -= fsp->scsi_resid;
 895                        } else {
 896                                fsp->status_code = FC_ERROR;
 897                        }
 898                }
 899        }
 900        fsp->state |= FC_SRB_RCV_STATUS;
 901
 902        /*
 903         * Check for missing or extra data frames.
 904         */
 905        if (unlikely(fsp->xfer_len != expected_len)) {
 906                if (fsp->xfer_len < expected_len) {
 907                        /*
 908                         * Some data may be queued locally,
 909                         * Wait a at least one jiffy to see if it is delivered.
 910                         * If this expires without data, we may do SRR.
 911                         */
 912                        fc_fcp_timer_set(fsp, 2);
 913                        return;
 914                }
 915                fsp->status_code = FC_DATA_OVRRUN;
 916                FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
 917                           "len %x, data len %x\n",
 918                           fsp->rport->port_id,
 919                           fsp->xfer_len, expected_len, fsp->data_len);
 920        }
 921        fc_fcp_complete_locked(fsp);
 922        return;
 923
 924len_err:
 925        FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
 926                   "snsl %u\n", flags, fr_len(fp), respl, snsl);
 927err:
 928        fsp->status_code = FC_ERROR;
 929        fc_fcp_complete_locked(fsp);
 930}
 931
 932/**
 933 * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
 934 *                            fcp_pkt lock held
 935 * @fsp: The FCP packet to be completed
 936 *
 937 * This function may sleep if a timer is pending. The packet lock must be
 938 * held, and the host lock must not be held.
 939 */
 940static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
 941{
 942        struct fc_lport *lport = fsp->lp;
 943        struct fc_seq *seq;
 944        struct fc_exch *ep;
 945        u32 f_ctl;
 946
 947        if (fsp->state & FC_SRB_ABORT_PENDING)
 948                return;
 949
 950        if (fsp->state & FC_SRB_ABORTED) {
 951                if (!fsp->status_code)
 952                        fsp->status_code = FC_CMD_ABORTED;
 953        } else {
 954                /*
 955                 * Test for transport underrun, independent of response
 956                 * underrun status.
 957                 */
 958                if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
 959                    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
 960                     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
 961                        fsp->status_code = FC_DATA_UNDRUN;
 962                        fsp->io_status = 0;
 963                }
 964        }
 965
 966        seq = fsp->seq_ptr;
 967        if (seq) {
 968                fsp->seq_ptr = NULL;
 969                if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
 970                        struct fc_frame *conf_frame;
 971                        struct fc_seq *csp;
 972
 973                        csp = lport->tt.seq_start_next(seq);
 974                        conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
 975                        if (conf_frame) {
 976                                f_ctl = FC_FC_SEQ_INIT;
 977                                f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
 978                                ep = fc_seq_exch(seq);
 979                                fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
 980                                               ep->did, ep->sid,
 981                                               FC_TYPE_FCP, f_ctl, 0);
 982                                lport->tt.seq_send(lport, csp, conf_frame);
 983                        }
 984                }
 985                lport->tt.exch_done(seq);
 986        }
 987        /*
 988         * Some resets driven by SCSI are not I/Os and do not have
 989         * SCSI commands associated with the requests. We should not
 990         * call I/O completion if we do not have a SCSI command.
 991         */
 992        if (fsp->cmd)
 993                fc_io_compl(fsp);
 994}
 995
 996/**
 997 * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
 998 * @fsp:   The FCP packet whose exchanges should be canceled
 999 * @error: The reason for the cancellation
1000 */
1001static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1002{
1003        struct fc_lport *lport = fsp->lp;
1004
1005        if (fsp->seq_ptr) {
1006                lport->tt.exch_done(fsp->seq_ptr);
1007                fsp->seq_ptr = NULL;
1008        }
1009        fsp->status_code = error;
1010}
1011
1012/**
1013 * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1014 * @lport: The local port whose exchanges should be canceled
1015 * @id:    The target's ID
1016 * @lun:   The LUN
1017 * @error: The reason for cancellation
1018 *
1019 * If lun or id is -1, they are ignored.
1020 */
1021static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1022                                    unsigned int lun, int error)
1023{
1024        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1025        struct fc_fcp_pkt *fsp;
1026        struct scsi_cmnd *sc_cmd;
1027        unsigned long flags;
1028
1029        spin_lock_irqsave(&si->scsi_queue_lock, flags);
1030restart:
1031        list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1032                sc_cmd = fsp->cmd;
1033                if (id != -1 && scmd_id(sc_cmd) != id)
1034                        continue;
1035
1036                if (lun != -1 && sc_cmd->device->lun != lun)
1037                        continue;
1038
1039                fc_fcp_pkt_hold(fsp);
1040                spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1041
1042                if (!fc_fcp_lock_pkt(fsp)) {
1043                        fc_fcp_cleanup_cmd(fsp, error);
1044                        fc_io_compl(fsp);
1045                        fc_fcp_unlock_pkt(fsp);
1046                }
1047
1048                fc_fcp_pkt_release(fsp);
1049                spin_lock_irqsave(&si->scsi_queue_lock, flags);
1050                /*
1051                 * while we dropped the lock multiple pkts could
1052                 * have been released, so we have to start over.
1053                 */
1054                goto restart;
1055        }
1056        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1057}
1058
1059/**
1060 * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1061 * @lport: The local port whose exchanges are to be aborted
1062 */
1063static void fc_fcp_abort_io(struct fc_lport *lport)
1064{
1065        fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1066}
1067
1068/**
1069 * fc_fcp_pkt_send() - Send a fcp_pkt
1070 * @lport: The local port to send the FCP packet on
1071 * @fsp:   The FCP packet to send
1072 *
1073 * Return:  Zero for success and -1 for failure
1074 * Locks:   Called without locks held
1075 */
1076static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1077{
1078        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1079        unsigned long flags;
1080        int rc;
1081
1082        fsp->cmd->SCp.ptr = (char *)fsp;
1083        fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1084        fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1085
1086        int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1087        memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1088
1089        spin_lock_irqsave(&si->scsi_queue_lock, flags);
1090        list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1091        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1092        rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1093        if (unlikely(rc)) {
1094                spin_lock_irqsave(&si->scsi_queue_lock, flags);
1095                fsp->cmd->SCp.ptr = NULL;
1096                list_del(&fsp->list);
1097                spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1098        }
1099
1100        return rc;
1101}
1102
1103/**
1104 * get_fsp_rec_tov() - Helper function to get REC_TOV
1105 * @fsp: the FCP packet
1106 *
1107 * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1108 */
1109static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1110{
1111        struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1112
1113        return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1114}
1115
1116/**
1117 * fc_fcp_cmd_send() - Send a FCP command
1118 * @lport: The local port to send the command on
1119 * @fsp:   The FCP packet the command is on
1120 * @resp:  The handler for the response
1121 */
1122static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1123                           void (*resp)(struct fc_seq *,
1124                                        struct fc_frame *fp,
1125                                        void *arg))
1126{
1127        struct fc_frame *fp;
1128        struct fc_seq *seq;
1129        struct fc_rport *rport;
1130        struct fc_rport_libfc_priv *rpriv;
1131        const size_t len = sizeof(fsp->cdb_cmd);
1132        int rc = 0;
1133
1134        if (fc_fcp_lock_pkt(fsp))
1135                return 0;
1136
1137        fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1138        if (!fp) {
1139                rc = -1;
1140                goto unlock;
1141        }
1142
1143        memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1144        fr_fsp(fp) = fsp;
1145        rport = fsp->rport;
1146        fsp->max_payload = rport->maxframe_size;
1147        rpriv = rport->dd_data;
1148
1149        fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1150                       rpriv->local_port->port_id, FC_TYPE_FCP,
1151                       FC_FCTL_REQ, 0);
1152
1153        seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1154                                      fsp, 0);
1155        if (!seq) {
1156                rc = -1;
1157                goto unlock;
1158        }
1159        fsp->seq_ptr = seq;
1160        fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1161
1162        setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1163        if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1164                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1165
1166unlock:
1167        fc_fcp_unlock_pkt(fsp);
1168        return rc;
1169}
1170
1171/**
1172 * fc_fcp_error() - Handler for FCP layer errors
1173 * @fsp: The FCP packet the error is on
1174 * @fp:  The frame that has errored
1175 */
1176static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1177{
1178        int error = PTR_ERR(fp);
1179
1180        if (fc_fcp_lock_pkt(fsp))
1181                return;
1182
1183        if (error == -FC_EX_CLOSED) {
1184                fc_fcp_retry_cmd(fsp);
1185                goto unlock;
1186        }
1187
1188        /*
1189         * clear abort pending, because the lower layer
1190         * decided to force completion.
1191         */
1192        fsp->state &= ~FC_SRB_ABORT_PENDING;
1193        fsp->status_code = FC_CMD_PLOGO;
1194        fc_fcp_complete_locked(fsp);
1195unlock:
1196        fc_fcp_unlock_pkt(fsp);
1197}
1198
1199/**
1200 * fc_fcp_pkt_abort() - Abort a fcp_pkt
1201 * @fsp:   The FCP packet to abort on
1202 *
1203 * Called to send an abort and then wait for abort completion
1204 */
1205static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1206{
1207        int rc = FAILED;
1208        unsigned long ticks_left;
1209
1210        if (fc_fcp_send_abort(fsp))
1211                return FAILED;
1212
1213        init_completion(&fsp->tm_done);
1214        fsp->wait_for_comp = 1;
1215
1216        spin_unlock_bh(&fsp->scsi_pkt_lock);
1217        ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1218                                                        FC_SCSI_TM_TOV);
1219        spin_lock_bh(&fsp->scsi_pkt_lock);
1220        fsp->wait_for_comp = 0;
1221
1222        if (!ticks_left) {
1223                FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1224        } else if (fsp->state & FC_SRB_ABORTED) {
1225                FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1226                rc = SUCCESS;
1227                fc_fcp_complete_locked(fsp);
1228        }
1229
1230        return rc;
1231}
1232
1233/**
1234 * fc_lun_reset_send() - Send LUN reset command
1235 * @data: The FCP packet that identifies the LUN to be reset
1236 */
1237static void fc_lun_reset_send(unsigned long data)
1238{
1239        struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1240        struct fc_lport *lport = fsp->lp;
1241
1242        if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1243                if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1244                        return;
1245                if (fc_fcp_lock_pkt(fsp))
1246                        return;
1247                setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1248                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1249                fc_fcp_unlock_pkt(fsp);
1250        }
1251}
1252
1253/**
1254 * fc_lun_reset() - Send a LUN RESET command to a device
1255 *                  and wait for the reply
1256 * @lport: The local port to sent the command on
1257 * @fsp:   The FCP packet that identifies the LUN to be reset
1258 * @id:    The SCSI command ID
1259 * @lun:   The LUN ID to be reset
1260 */
1261static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1262                        unsigned int id, unsigned int lun)
1263{
1264        int rc;
1265
1266        fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1267        fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1268        int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1269
1270        fsp->wait_for_comp = 1;
1271        init_completion(&fsp->tm_done);
1272
1273        fc_lun_reset_send((unsigned long)fsp);
1274
1275        /*
1276         * wait for completion of reset
1277         * after that make sure all commands are terminated
1278         */
1279        rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1280
1281        spin_lock_bh(&fsp->scsi_pkt_lock);
1282        fsp->state |= FC_SRB_COMPL;
1283        spin_unlock_bh(&fsp->scsi_pkt_lock);
1284
1285        del_timer_sync(&fsp->timer);
1286
1287        spin_lock_bh(&fsp->scsi_pkt_lock);
1288        if (fsp->seq_ptr) {
1289                lport->tt.exch_done(fsp->seq_ptr);
1290                fsp->seq_ptr = NULL;
1291        }
1292        fsp->wait_for_comp = 0;
1293        spin_unlock_bh(&fsp->scsi_pkt_lock);
1294
1295        if (!rc) {
1296                FC_SCSI_DBG(lport, "lun reset failed\n");
1297                return FAILED;
1298        }
1299
1300        /* cdb_status holds the tmf's rsp code */
1301        if (fsp->cdb_status != FCP_TMF_CMPL)
1302                return FAILED;
1303
1304        FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1305        fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1306        return SUCCESS;
1307}
1308
1309/**
1310 * fc_tm_done() - Task Management response handler
1311 * @seq: The sequence that the response is on
1312 * @fp:  The response frame
1313 * @arg: The FCP packet the response is for
1314 */
1315static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1316{
1317        struct fc_fcp_pkt *fsp = arg;
1318        struct fc_frame_header *fh;
1319
1320        if (IS_ERR(fp)) {
1321                /*
1322                 * If there is an error just let it timeout or wait
1323                 * for TMF to be aborted if it timedout.
1324                 *
1325                 * scsi-eh will escalate for when either happens.
1326                 */
1327                return;
1328        }
1329
1330        if (fc_fcp_lock_pkt(fsp))
1331                goto out;
1332
1333        /*
1334         * raced with eh timeout handler.
1335         */
1336        if (!fsp->seq_ptr || !fsp->wait_for_comp)
1337                goto out_unlock;
1338
1339        fh = fc_frame_header_get(fp);
1340        if (fh->fh_type != FC_TYPE_BLS)
1341                fc_fcp_resp(fsp, fp);
1342        fsp->seq_ptr = NULL;
1343        fsp->lp->tt.exch_done(seq);
1344out_unlock:
1345        fc_fcp_unlock_pkt(fsp);
1346out:
1347        fc_frame_free(fp);
1348}
1349
1350/**
1351 * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1352 * @lport: The local port to be cleaned up
1353 */
1354static void fc_fcp_cleanup(struct fc_lport *lport)
1355{
1356        fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1357}
1358
1359/**
1360 * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1361 * @data: The FCP packet that has timed out
1362 *
1363 * If REC is supported then just issue it and return. The REC exchange will
1364 * complete or time out and recovery can continue at that point. Otherwise,
1365 * if the response has been received without all the data it has been
1366 * ER_TIMEOUT since the response was received. If the response has not been
1367 * received we see if data was received recently. If it has been then we
1368 * continue waiting, otherwise, we abort the command.
1369 */
1370static void fc_fcp_timeout(unsigned long data)
1371{
1372        struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1373        struct fc_rport *rport = fsp->rport;
1374        struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1375
1376        if (fc_fcp_lock_pkt(fsp))
1377                return;
1378
1379        if (fsp->cdb_cmd.fc_tm_flags)
1380                goto unlock;
1381
1382        fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1383
1384        if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1385                fc_fcp_rec(fsp);
1386        else if (fsp->state & FC_SRB_RCV_STATUS)
1387                fc_fcp_complete_locked(fsp);
1388        else
1389                fc_fcp_recovery(fsp, FC_TIMED_OUT);
1390        fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1391unlock:
1392        fc_fcp_unlock_pkt(fsp);
1393}
1394
1395/**
1396 * fc_fcp_rec() - Send a REC ELS request
1397 * @fsp: The FCP packet to send the REC request on
1398 */
1399static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1400{
1401        struct fc_lport *lport;
1402        struct fc_frame *fp;
1403        struct fc_rport *rport;
1404        struct fc_rport_libfc_priv *rpriv;
1405
1406        lport = fsp->lp;
1407        rport = fsp->rport;
1408        rpriv = rport->dd_data;
1409        if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1410                fsp->status_code = FC_HRD_ERROR;
1411                fsp->io_status = 0;
1412                fc_fcp_complete_locked(fsp);
1413                return;
1414        }
1415
1416        fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1417        if (!fp)
1418                goto retry;
1419
1420        fr_seq(fp) = fsp->seq_ptr;
1421        fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1422                       rpriv->local_port->port_id, FC_TYPE_ELS,
1423                       FC_FCTL_REQ, 0);
1424        if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1425                                 fc_fcp_rec_resp, fsp,
1426                                 2 * lport->r_a_tov)) {
1427                fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1428                return;
1429        }
1430retry:
1431        if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1432                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1433        else
1434                fc_fcp_recovery(fsp, FC_TIMED_OUT);
1435}
1436
1437/**
1438 * fc_fcp_rec_resp() - Handler for REC ELS responses
1439 * @seq: The sequence the response is on
1440 * @fp:  The response frame
1441 * @arg: The FCP packet the response is on
1442 *
1443 * If the response is a reject then the scsi layer will handle
1444 * the timeout. If the response is a LS_ACC then if the I/O was not completed
1445 * set the timeout and return. If the I/O was completed then complete the
1446 * exchange and tell the SCSI layer.
1447 */
1448static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1449{
1450        struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1451        struct fc_els_rec_acc *recp;
1452        struct fc_els_ls_rjt *rjt;
1453        u32 e_stat;
1454        u8 opcode;
1455        u32 offset;
1456        enum dma_data_direction data_dir;
1457        enum fc_rctl r_ctl;
1458        struct fc_rport_libfc_priv *rpriv;
1459
1460        if (IS_ERR(fp)) {
1461                fc_fcp_rec_error(fsp, fp);
1462                return;
1463        }
1464
1465        if (fc_fcp_lock_pkt(fsp))
1466                goto out;
1467
1468        fsp->recov_retry = 0;
1469        opcode = fc_frame_payload_op(fp);
1470        if (opcode == ELS_LS_RJT) {
1471                rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1472                switch (rjt->er_reason) {
1473                default:
1474                        FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1475                                   "reason %d expl %d\n",
1476                                   fsp->rport->port_id, rjt->er_reason,
1477                                   rjt->er_explan);
1478                        /* fall through */
1479                case ELS_RJT_UNSUP:
1480                        FC_FCP_DBG(fsp, "device does not support REC\n");
1481                        rpriv = fsp->rport->dd_data;
1482                        /*
1483                         * if we do not spport RECs or got some bogus
1484                         * reason then resetup timer so we check for
1485                         * making progress.
1486                         */
1487                        rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1488                        break;
1489                case ELS_RJT_LOGIC:
1490                case ELS_RJT_UNAB:
1491                        /*
1492                         * If no data transfer, the command frame got dropped
1493                         * so we just retry.  If data was transferred, we
1494                         * lost the response but the target has no record,
1495                         * so we abort and retry.
1496                         */
1497                        if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1498                            fsp->xfer_len == 0) {
1499                                fc_fcp_retry_cmd(fsp);
1500                                break;
1501                        }
1502                        fc_fcp_recovery(fsp, FC_ERROR);
1503                        break;
1504                }
1505        } else if (opcode == ELS_LS_ACC) {
1506                if (fsp->state & FC_SRB_ABORTED)
1507                        goto unlock_out;
1508
1509                data_dir = fsp->cmd->sc_data_direction;
1510                recp = fc_frame_payload_get(fp, sizeof(*recp));
1511                offset = ntohl(recp->reca_fc4value);
1512                e_stat = ntohl(recp->reca_e_stat);
1513
1514                if (e_stat & ESB_ST_COMPLETE) {
1515
1516                        /*
1517                         * The exchange is complete.
1518                         *
1519                         * For output, we must've lost the response.
1520                         * For input, all data must've been sent.
1521                         * We lost may have lost the response
1522                         * (and a confirmation was requested) and maybe
1523                         * some data.
1524                         *
1525                         * If all data received, send SRR
1526                         * asking for response.  If partial data received,
1527                         * or gaps, SRR requests data at start of gap.
1528                         * Recovery via SRR relies on in-order-delivery.
1529                         */
1530                        if (data_dir == DMA_TO_DEVICE) {
1531                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1532                        } else if (fsp->xfer_contig_end == offset) {
1533                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1534                        } else {
1535                                offset = fsp->xfer_contig_end;
1536                                r_ctl = FC_RCTL_DD_SOL_DATA;
1537                        }
1538                        fc_fcp_srr(fsp, r_ctl, offset);
1539                } else if (e_stat & ESB_ST_SEQ_INIT) {
1540                        /*
1541                         * The remote port has the initiative, so just
1542                         * keep waiting for it to complete.
1543                         */
1544                        fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1545                } else {
1546
1547                        /*
1548                         * The exchange is incomplete, we have seq. initiative.
1549                         * Lost response with requested confirmation,
1550                         * lost confirmation, lost transfer ready or
1551                         * lost write data.
1552                         *
1553                         * For output, if not all data was received, ask
1554                         * for transfer ready to be repeated.
1555                         *
1556                         * If we received or sent all the data, send SRR to
1557                         * request response.
1558                         *
1559                         * If we lost a response, we may have lost some read
1560                         * data as well.
1561                         */
1562                        r_ctl = FC_RCTL_DD_SOL_DATA;
1563                        if (data_dir == DMA_TO_DEVICE) {
1564                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1565                                if (offset < fsp->data_len)
1566                                        r_ctl = FC_RCTL_DD_DATA_DESC;
1567                        } else if (offset == fsp->xfer_contig_end) {
1568                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1569                        } else if (fsp->xfer_contig_end < offset) {
1570                                offset = fsp->xfer_contig_end;
1571                        }
1572                        fc_fcp_srr(fsp, r_ctl, offset);
1573                }
1574        }
1575unlock_out:
1576        fc_fcp_unlock_pkt(fsp);
1577out:
1578        fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1579        fc_frame_free(fp);
1580}
1581
1582/**
1583 * fc_fcp_rec_error() - Handler for REC errors
1584 * @fsp: The FCP packet the error is on
1585 * @fp:  The REC frame
1586 */
1587static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1588{
1589        int error = PTR_ERR(fp);
1590
1591        if (fc_fcp_lock_pkt(fsp))
1592                goto out;
1593
1594        switch (error) {
1595        case -FC_EX_CLOSED:
1596                fc_fcp_retry_cmd(fsp);
1597                break;
1598
1599        default:
1600                FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1601                           fsp, fsp->rport->port_id, error);
1602                fsp->status_code = FC_CMD_PLOGO;
1603                /* fall through */
1604
1605        case -FC_EX_TIMEOUT:
1606                /*
1607                 * Assume REC or LS_ACC was lost.
1608                 * The exchange manager will have aborted REC, so retry.
1609                 */
1610                FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1611                           fsp->rport->port_id, error, fsp->recov_retry,
1612                           FC_MAX_RECOV_RETRY);
1613                if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1614                        fc_fcp_rec(fsp);
1615                else
1616                        fc_fcp_recovery(fsp, FC_ERROR);
1617                break;
1618        }
1619        fc_fcp_unlock_pkt(fsp);
1620out:
1621        fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1622}
1623
1624/**
1625 * fc_fcp_recovery() - Handler for fcp_pkt recovery
1626 * @fsp: The FCP pkt that needs to be aborted
1627 */
1628static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1629{
1630        fsp->status_code = code;
1631        fsp->cdb_status = 0;
1632        fsp->io_status = 0;
1633        /*
1634         * if this fails then we let the scsi command timer fire and
1635         * scsi-ml escalate.
1636         */
1637        fc_fcp_send_abort(fsp);
1638}
1639
1640/**
1641 * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1642 * @fsp:   The FCP packet the SRR is to be sent on
1643 * @r_ctl: The R_CTL field for the SRR request
1644 * This is called after receiving status but insufficient data, or
1645 * when expecting status but the request has timed out.
1646 */
1647static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1648{
1649        struct fc_lport *lport = fsp->lp;
1650        struct fc_rport *rport;
1651        struct fc_rport_libfc_priv *rpriv;
1652        struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1653        struct fc_seq *seq;
1654        struct fcp_srr *srr;
1655        struct fc_frame *fp;
1656        unsigned int rec_tov;
1657
1658        rport = fsp->rport;
1659        rpriv = rport->dd_data;
1660
1661        if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1662            rpriv->rp_state != RPORT_ST_READY)
1663                goto retry;                     /* shouldn't happen */
1664        fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1665        if (!fp)
1666                goto retry;
1667
1668        srr = fc_frame_payload_get(fp, sizeof(*srr));
1669        memset(srr, 0, sizeof(*srr));
1670        srr->srr_op = ELS_SRR;
1671        srr->srr_ox_id = htons(ep->oxid);
1672        srr->srr_rx_id = htons(ep->rxid);
1673        srr->srr_r_ctl = r_ctl;
1674        srr->srr_rel_off = htonl(offset);
1675
1676        fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1677                       rpriv->local_port->port_id, FC_TYPE_FCP,
1678                       FC_FCTL_REQ, 0);
1679
1680        rec_tov = get_fsp_rec_tov(fsp);
1681        seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1682                                      fc_fcp_pkt_destroy,
1683                                      fsp, jiffies_to_msecs(rec_tov));
1684        if (!seq)
1685                goto retry;
1686
1687        fsp->recov_seq = seq;
1688        fsp->xfer_len = offset;
1689        fsp->xfer_contig_end = offset;
1690        fsp->state &= ~FC_SRB_RCV_STATUS;
1691        fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1692        return;
1693retry:
1694        fc_fcp_retry_cmd(fsp);
1695}
1696
1697/**
1698 * fc_fcp_srr_resp() - Handler for SRR response
1699 * @seq: The sequence the SRR is on
1700 * @fp:  The SRR frame
1701 * @arg: The FCP packet the SRR is on
1702 */
1703static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1704{
1705        struct fc_fcp_pkt *fsp = arg;
1706        struct fc_frame_header *fh;
1707
1708        if (IS_ERR(fp)) {
1709                fc_fcp_srr_error(fsp, fp);
1710                return;
1711        }
1712
1713        if (fc_fcp_lock_pkt(fsp))
1714                goto out;
1715
1716        fh = fc_frame_header_get(fp);
1717        /*
1718         * BUG? fc_fcp_srr_error calls exch_done which would release
1719         * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1720         * then fc_exch_timeout would be sending an abort. The exch_done
1721         * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1722         * an abort response though.
1723         */
1724        if (fh->fh_type == FC_TYPE_BLS) {
1725                fc_fcp_unlock_pkt(fsp);
1726                return;
1727        }
1728
1729        switch (fc_frame_payload_op(fp)) {
1730        case ELS_LS_ACC:
1731                fsp->recov_retry = 0;
1732                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1733                break;
1734        case ELS_LS_RJT:
1735        default:
1736                fc_fcp_recovery(fsp, FC_ERROR);
1737                break;
1738        }
1739        fc_fcp_unlock_pkt(fsp);
1740out:
1741        fsp->lp->tt.exch_done(seq);
1742        fc_frame_free(fp);
1743}
1744
1745/**
1746 * fc_fcp_srr_error() - Handler for SRR errors
1747 * @fsp: The FCP packet that the SRR error is on
1748 * @fp:  The SRR frame
1749 */
1750static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1751{
1752        if (fc_fcp_lock_pkt(fsp))
1753                goto out;
1754        switch (PTR_ERR(fp)) {
1755        case -FC_EX_TIMEOUT:
1756                if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1757                        fc_fcp_rec(fsp);
1758                else
1759                        fc_fcp_recovery(fsp, FC_TIMED_OUT);
1760                break;
1761        case -FC_EX_CLOSED:                     /* e.g., link failure */
1762                /* fall through */
1763        default:
1764                fc_fcp_retry_cmd(fsp);
1765                break;
1766        }
1767        fc_fcp_unlock_pkt(fsp);
1768out:
1769        fsp->lp->tt.exch_done(fsp->recov_seq);
1770}
1771
1772/**
1773 * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1774 * @lport: The local port to be checked
1775 */
1776static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1777{
1778        /* lock ? */
1779        return (lport->state == LPORT_ST_READY) &&
1780                lport->link_up && !lport->qfull;
1781}
1782
1783/**
1784 * fc_queuecommand() - The queuecommand function of the SCSI template
1785 * @shost: The Scsi_Host that the command was issued to
1786 * @cmd:   The scsi_cmnd to be executed
1787 *
1788 * This is the i/o strategy routine, called by the SCSI layer.
1789 */
1790int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1791{
1792        struct fc_lport *lport = shost_priv(shost);
1793        struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1794        struct fc_fcp_pkt *fsp;
1795        struct fc_rport_libfc_priv *rpriv;
1796        int rval;
1797        int rc = 0;
1798        struct fc_stats *stats;
1799
1800        rval = fc_remote_port_chkready(rport);
1801        if (rval) {
1802                sc_cmd->result = rval;
1803                sc_cmd->scsi_done(sc_cmd);
1804                return 0;
1805        }
1806
1807        if (!*(struct fc_remote_port **)rport->dd_data) {
1808                /*
1809                 * rport is transitioning from blocked/deleted to
1810                 * online
1811                 */
1812                sc_cmd->result = DID_IMM_RETRY << 16;
1813                sc_cmd->scsi_done(sc_cmd);
1814                goto out;
1815        }
1816
1817        rpriv = rport->dd_data;
1818
1819        if (!fc_fcp_lport_queue_ready(lport)) {
1820                if (lport->qfull)
1821                        fc_fcp_can_queue_ramp_down(lport);
1822                rc = SCSI_MLQUEUE_HOST_BUSY;
1823                goto out;
1824        }
1825
1826        fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1827        if (fsp == NULL) {
1828                rc = SCSI_MLQUEUE_HOST_BUSY;
1829                goto out;
1830        }
1831
1832        /*
1833         * build the libfc request pkt
1834         */
1835        fsp->cmd = sc_cmd;      /* save the cmd */
1836        fsp->rport = rport;     /* set the remote port ptr */
1837
1838        /*
1839         * set up the transfer length
1840         */
1841        fsp->data_len = scsi_bufflen(sc_cmd);
1842        fsp->xfer_len = 0;
1843
1844        /*
1845         * setup the data direction
1846         */
1847        stats = per_cpu_ptr(lport->stats, get_cpu());
1848        if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1849                fsp->req_flags = FC_SRB_READ;
1850                stats->InputRequests++;
1851                stats->InputBytes += fsp->data_len;
1852        } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1853                fsp->req_flags = FC_SRB_WRITE;
1854                stats->OutputRequests++;
1855                stats->OutputBytes += fsp->data_len;
1856        } else {
1857                fsp->req_flags = 0;
1858                stats->ControlRequests++;
1859        }
1860        put_cpu();
1861
1862        /*
1863         * send it to the lower layer
1864         * if we get -1 return then put the request in the pending
1865         * queue.
1866         */
1867        rval = fc_fcp_pkt_send(lport, fsp);
1868        if (rval != 0) {
1869                fsp->state = FC_SRB_FREE;
1870                fc_fcp_pkt_release(fsp);
1871                rc = SCSI_MLQUEUE_HOST_BUSY;
1872        }
1873out:
1874        return rc;
1875}
1876EXPORT_SYMBOL(fc_queuecommand);
1877
1878/**
1879 * fc_io_compl() - Handle responses for completed commands
1880 * @fsp: The FCP packet that is complete
1881 *
1882 * Translates fcp_pkt errors to a Linux SCSI errors.
1883 * The fcp packet lock must be held when calling.
1884 */
1885static void fc_io_compl(struct fc_fcp_pkt *fsp)
1886{
1887        struct fc_fcp_internal *si;
1888        struct scsi_cmnd *sc_cmd;
1889        struct fc_lport *lport;
1890        unsigned long flags;
1891
1892        /* release outstanding ddp context */
1893        fc_fcp_ddp_done(fsp);
1894
1895        fsp->state |= FC_SRB_COMPL;
1896        if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1897                spin_unlock_bh(&fsp->scsi_pkt_lock);
1898                del_timer_sync(&fsp->timer);
1899                spin_lock_bh(&fsp->scsi_pkt_lock);
1900        }
1901
1902        lport = fsp->lp;
1903        si = fc_get_scsi_internal(lport);
1904
1905        /*
1906         * if can_queue ramp down is done then try can_queue ramp up
1907         * since commands are completing now.
1908         */
1909        if (si->last_can_queue_ramp_down_time)
1910                fc_fcp_can_queue_ramp_up(lport);
1911
1912        sc_cmd = fsp->cmd;
1913        CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1914        switch (fsp->status_code) {
1915        case FC_COMPLETE:
1916                if (fsp->cdb_status == 0) {
1917                        /*
1918                         * good I/O status
1919                         */
1920                        sc_cmd->result = DID_OK << 16;
1921                        if (fsp->scsi_resid)
1922                                CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1923                } else {
1924                        /*
1925                         * transport level I/O was ok but scsi
1926                         * has non zero status
1927                         */
1928                        sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1929                }
1930                break;
1931        case FC_ERROR:
1932                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1933                           "due to FC_ERROR\n");
1934                sc_cmd->result = DID_ERROR << 16;
1935                break;
1936        case FC_DATA_UNDRUN:
1937                if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1938                        /*
1939                         * scsi status is good but transport level
1940                         * underrun.
1941                         */
1942                        if (fsp->state & FC_SRB_RCV_STATUS) {
1943                                sc_cmd->result = DID_OK << 16;
1944                        } else {
1945                                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1946                                           " due to FC_DATA_UNDRUN (trans)\n");
1947                                sc_cmd->result = DID_ERROR << 16;
1948                        }
1949                } else {
1950                        /*
1951                         * scsi got underrun, this is an error
1952                         */
1953                        FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1954                                   "due to FC_DATA_UNDRUN (scsi)\n");
1955                        CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1956                        sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1957                }
1958                break;
1959        case FC_DATA_OVRRUN:
1960                /*
1961                 * overrun is an error
1962                 */
1963                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1964                           "due to FC_DATA_OVRRUN\n");
1965                sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1966                break;
1967        case FC_CMD_ABORTED:
1968                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1969                          "due to FC_CMD_ABORTED\n");
1970                sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1971                break;
1972        case FC_CMD_RESET:
1973                FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1974                           "due to FC_CMD_RESET\n");
1975                sc_cmd->result = (DID_RESET << 16);
1976                break;
1977        case FC_HRD_ERROR:
1978                FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1979                           "due to FC_HRD_ERROR\n");
1980                sc_cmd->result = (DID_NO_CONNECT << 16);
1981                break;
1982        case FC_CRC_ERROR:
1983                FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1984                           "due to FC_CRC_ERROR\n");
1985                sc_cmd->result = (DID_PARITY << 16);
1986                break;
1987        case FC_TIMED_OUT:
1988                FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1989                           "due to FC_TIMED_OUT\n");
1990                sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1991                break;
1992        default:
1993                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1994                           "due to unknown error\n");
1995                sc_cmd->result = (DID_ERROR << 16);
1996                break;
1997        }
1998
1999        if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2000                sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2001
2002        spin_lock_irqsave(&si->scsi_queue_lock, flags);
2003        list_del(&fsp->list);
2004        sc_cmd->SCp.ptr = NULL;
2005        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2006        sc_cmd->scsi_done(sc_cmd);
2007
2008        /* release ref from initial allocation in queue command */
2009        fc_fcp_pkt_release(fsp);
2010}
2011
2012/**
2013 * fc_eh_abort() - Abort a command
2014 * @sc_cmd: The SCSI command to abort
2015 *
2016 * From SCSI host template.
2017 * Send an ABTS to the target device and wait for the response.
2018 */
2019int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2020{
2021        struct fc_fcp_pkt *fsp;
2022        struct fc_lport *lport;
2023        struct fc_fcp_internal *si;
2024        int rc = FAILED;
2025        unsigned long flags;
2026        int rval;
2027
2028        rval = fc_block_scsi_eh(sc_cmd);
2029        if (rval)
2030                return rval;
2031
2032        lport = shost_priv(sc_cmd->device->host);
2033        if (lport->state != LPORT_ST_READY)
2034                return rc;
2035        else if (!lport->link_up)
2036                return rc;
2037
2038        si = fc_get_scsi_internal(lport);
2039        spin_lock_irqsave(&si->scsi_queue_lock, flags);
2040        fsp = CMD_SP(sc_cmd);
2041        if (!fsp) {
2042                /* command completed while scsi eh was setting up */
2043                spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2044                return SUCCESS;
2045        }
2046        /* grab a ref so the fsp and sc_cmd cannot be released from under us */
2047        fc_fcp_pkt_hold(fsp);
2048        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2049
2050        if (fc_fcp_lock_pkt(fsp)) {
2051                /* completed while we were waiting for timer to be deleted */
2052                rc = SUCCESS;
2053                goto release_pkt;
2054        }
2055
2056        rc = fc_fcp_pkt_abort(fsp);
2057        fc_fcp_unlock_pkt(fsp);
2058
2059release_pkt:
2060        fc_fcp_pkt_release(fsp);
2061        return rc;
2062}
2063EXPORT_SYMBOL(fc_eh_abort);
2064
2065/**
2066 * fc_eh_device_reset() - Reset a single LUN
2067 * @sc_cmd: The SCSI command which identifies the device whose
2068 *          LUN is to be reset
2069 *
2070 * Set from SCSI host template.
2071 */
2072int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2073{
2074        struct fc_lport *lport;
2075        struct fc_fcp_pkt *fsp;
2076        struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2077        int rc = FAILED;
2078        int rval;
2079
2080        rval = fc_block_scsi_eh(sc_cmd);
2081        if (rval)
2082                return rval;
2083
2084        lport = shost_priv(sc_cmd->device->host);
2085
2086        if (lport->state != LPORT_ST_READY)
2087                return rc;
2088
2089        FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2090
2091        fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2092        if (fsp == NULL) {
2093                printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2094                goto out;
2095        }
2096
2097        /*
2098         * Build the libfc request pkt. Do not set the scsi cmnd, because
2099         * the sc passed in is not setup for execution like when sent
2100         * through the queuecommand callout.
2101         */
2102        fsp->rport = rport;     /* set the remote port ptr */
2103
2104        /*
2105         * flush outstanding commands
2106         */
2107        rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2108        fsp->state = FC_SRB_FREE;
2109        fc_fcp_pkt_release(fsp);
2110
2111out:
2112        return rc;
2113}
2114EXPORT_SYMBOL(fc_eh_device_reset);
2115
2116/**
2117 * fc_eh_host_reset() - Reset a Scsi_Host.
2118 * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2119 */
2120int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2121{
2122        struct Scsi_Host *shost = sc_cmd->device->host;
2123        struct fc_lport *lport = shost_priv(shost);
2124        unsigned long wait_tmo;
2125
2126        FC_SCSI_DBG(lport, "Resetting host\n");
2127
2128        fc_block_scsi_eh(sc_cmd);
2129
2130        lport->tt.lport_reset(lport);
2131        wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2132        while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2133                                                               wait_tmo))
2134                msleep(1000);
2135
2136        if (fc_fcp_lport_queue_ready(lport)) {
2137                shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2138                             "on port (%6.6x)\n", lport->port_id);
2139                return SUCCESS;
2140        } else {
2141                shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2142                             "port (%6.6x) is not ready.\n",
2143                             lport->port_id);
2144                return FAILED;
2145        }
2146}
2147EXPORT_SYMBOL(fc_eh_host_reset);
2148
2149/**
2150 * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2151 * @sdev: The SCSI device that identifies the SCSI host
2152 *
2153 * Configures queue depth based on host's cmd_per_len. If not set
2154 * then we use the libfc default.
2155 */
2156int fc_slave_alloc(struct scsi_device *sdev)
2157{
2158        struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2159
2160        if (!rport || fc_remote_port_chkready(rport))
2161                return -ENXIO;
2162
2163        if (sdev->tagged_supported)
2164                scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2165        else
2166                scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2167                                        FC_FCP_DFLT_QUEUE_DEPTH);
2168
2169        return 0;
2170}
2171EXPORT_SYMBOL(fc_slave_alloc);
2172
2173/**
2174 * fc_change_queue_depth() - Change a device's queue depth
2175 * @sdev:   The SCSI device whose queue depth is to change
2176 * @qdepth: The new queue depth
2177 * @reason: The resason for the change
2178 */
2179int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2180{
2181        switch (reason) {
2182        case SCSI_QDEPTH_DEFAULT:
2183                scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2184                break;
2185        case SCSI_QDEPTH_QFULL:
2186                scsi_track_queue_full(sdev, qdepth);
2187                break;
2188        case SCSI_QDEPTH_RAMP_UP:
2189                scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2190                break;
2191        default:
2192                return -EOPNOTSUPP;
2193        }
2194        return sdev->queue_depth;
2195}
2196EXPORT_SYMBOL(fc_change_queue_depth);
2197
2198/**
2199 * fc_change_queue_type() - Change a device's queue type
2200 * @sdev:     The SCSI device whose queue depth is to change
2201 * @tag_type: Identifier for queue type
2202 */
2203int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2204{
2205        if (sdev->tagged_supported) {
2206                scsi_set_tag_type(sdev, tag_type);
2207                if (tag_type)
2208                        scsi_activate_tcq(sdev, sdev->queue_depth);
2209                else
2210                        scsi_deactivate_tcq(sdev, sdev->queue_depth);
2211        } else
2212                tag_type = 0;
2213
2214        return tag_type;
2215}
2216EXPORT_SYMBOL(fc_change_queue_type);
2217
2218/**
2219 * fc_fcp_destory() - Tear down the FCP layer for a given local port
2220 * @lport: The local port that no longer needs the FCP layer
2221 */
2222void fc_fcp_destroy(struct fc_lport *lport)
2223{
2224        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2225
2226        if (!list_empty(&si->scsi_pkt_queue))
2227                printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2228                       "port (%6.6x)\n", lport->port_id);
2229
2230        mempool_destroy(si->scsi_pkt_pool);
2231        kfree(si);
2232        lport->scsi_priv = NULL;
2233}
2234EXPORT_SYMBOL(fc_fcp_destroy);
2235
2236int fc_setup_fcp(void)
2237{
2238        int rc = 0;
2239
2240        scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2241                                            sizeof(struct fc_fcp_pkt),
2242                                            0, SLAB_HWCACHE_ALIGN, NULL);
2243        if (!scsi_pkt_cachep) {
2244                printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2245                       "module load failed!");
2246                rc = -ENOMEM;
2247        }
2248
2249        return rc;
2250}
2251
2252void fc_destroy_fcp(void)
2253{
2254        if (scsi_pkt_cachep)
2255                kmem_cache_destroy(scsi_pkt_cachep);
2256}
2257
2258/**
2259 * fc_fcp_init() - Initialize the FCP layer for a local port
2260 * @lport: The local port to initialize the exchange layer for
2261 */
2262int fc_fcp_init(struct fc_lport *lport)
2263{
2264        int rc;
2265        struct fc_fcp_internal *si;
2266
2267        if (!lport->tt.fcp_cmd_send)
2268                lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2269
2270        if (!lport->tt.fcp_cleanup)
2271                lport->tt.fcp_cleanup = fc_fcp_cleanup;
2272
2273        if (!lport->tt.fcp_abort_io)
2274                lport->tt.fcp_abort_io = fc_fcp_abort_io;
2275
2276        si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2277        if (!si)
2278                return -ENOMEM;
2279        lport->scsi_priv = si;
2280        si->max_can_queue = lport->host->can_queue;
2281        INIT_LIST_HEAD(&si->scsi_pkt_queue);
2282        spin_lock_init(&si->scsi_queue_lock);
2283
2284        si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2285        if (!si->scsi_pkt_pool) {
2286                rc = -ENOMEM;
2287                goto free_internal;
2288        }
2289        return 0;
2290
2291free_internal:
2292        kfree(si);
2293        return rc;
2294}
2295EXPORT_SYMBOL(fc_fcp_init);
2296